From: Nava kishore Manne <nava.manne@xilinx.com>
To: <mdf@kernel.org>, <trix@redhat.com>, <robh+dt@kernel.org>,
<michal.simek@xilinx.com>, <gregkh@linuxfoundation.org>,
<jolly.shah@xilinx.com>, <rajan.vaja@xilinx.com>, <arnd@arndb.de>,
<manish.narani@xilinx.com>, <amit.sunil.dhamne@xilinx.com>,
<tejas.patel@xilinx.com>, <linux-fpga@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<chinnikishore369@gmail.com>
Cc: Nava kishore Manne <nava.manne@xilinx.com>
Subject: [PATCH v3 1/3] drivers: firmware: Add PDI load API support
Date: Thu, 4 Mar 2021 12:32:22 +0530 [thread overview]
Message-ID: <20210304070224.22346-2-nava.manne@xilinx.com> (raw)
In-Reply-To: <20210304070224.22346-1-nava.manne@xilinx.com>
This patch adds load PDI API support to enable full/partial PDI loading
from linux. Programmable Device Image (PDI) is combination of headers,
images and bitstream files to be loaded.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
-Updated API Doc and commit msg.
No functional changes.
Changes for v3:
-Added PDI_SRC_DDR macro in the firmware.h file.
drivers/firmware/xilinx/zynqmp.c | 17 +++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 10 ++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 7eb9958662dd..9ee02655db89 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -897,6 +897,23 @@ int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
+/**
+ * zynqmp_pm_load_pdi - Load and process PDI
+ * @src: Source device where PDI is located
+ * @address: PDI src address
+ *
+ * This function provides support to load PDI from linux
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+ return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src,
+ lower_32_bits(address),
+ upper_32_bits(address), 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi);
+
/**
* zynqmp_pm_aes - Access AES hardware to encrypt/decrypt the data using
* AES-GCM core.
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 2a0da841c942..3eba9d5c7640 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -52,6 +52,10 @@
#define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U
#define ZYNQMP_PM_CAPABILITY_UNUSABLE 0x8U
+/* Loader commands */
+#define PM_LOAD_PDI 0x701
+#define PDI_SRC_DDR 0xF
+
/*
* Firmware FPGA Manager flags
* XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
@@ -354,6 +358,7 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_load_pdi(const u32 src, const u64 address);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -538,6 +543,11 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.18.0
next prev parent reply other threads:[~2021-03-04 7:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-04 7:02 [PATCH v3 0/3] Add Bitstream configuration support for Versal Nava kishore Manne
2021-03-04 7:02 ` Nava kishore Manne [this message]
2021-03-04 7:02 ` [PATCH v3 2/3] dt-bindings: fpga: Add binding doc for versal fpga manager Nava kishore Manne
2021-03-08 20:19 ` Rob Herring
2021-03-10 10:49 ` Nava kishore Manne
2021-03-10 17:12 ` Rob Herring
2021-03-10 17:19 ` Rob Herring
2021-04-15 6:07 ` Nava kishore Manne
2021-03-04 7:02 ` [PATCH v3 3/3] fpga: versal-fpga: Add versal fpga manager driver Nava kishore Manne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210304070224.22346-2-nava.manne@xilinx.com \
--to=nava.manne@xilinx.com \
--cc=amit.sunil.dhamne@xilinx.com \
--cc=arnd@arndb.de \
--cc=chinnikishore369@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jolly.shah@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manish.narani@xilinx.com \
--cc=mdf@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=rajan.vaja@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=tejas.patel@xilinx.com \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).