From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
festevam@gmail.com, lgirdwood@gmail.com, broonie@kernel.org,
perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 1/2] ASoC: fsl-asoc-card: Add support for WM8958 codec
Date: Wed, 17 Mar 2021 21:05:02 +0800 [thread overview]
Message-ID: <1615986303-27959-1-git-send-email-shengjiu.wang@nxp.com> (raw)
WM8958 codec is used on some i.MX based platform.
So add it support in this generic driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/Kconfig | 2 ++
sound/soc/fsl/fsl-asoc-card.c | 17 +++++++++++++++--
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index c71c6024320b..0917d65d6921 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -310,6 +310,8 @@ config SND_SOC_FSL_ASOC_CARD
select SND_SOC_FSL_ESAI
select SND_SOC_FSL_SAI
select SND_SOC_FSL_SSI
+ select SND_SOC_WM8994
+ select MFD_WM8994
help
ALSA SoC Audio support with ASRC feature for Freescale SoCs that have
ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888,
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index f62f81ceab0d..c62bfd1c3ac7 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -25,6 +25,7 @@
#include "../codecs/sgtl5000.h"
#include "../codecs/wm8962.h"
#include "../codecs/wm8960.h"
+#include "../codecs/wm8994.h"
#define CS427x_SYSCLK_MCLK 0
@@ -37,12 +38,14 @@
/**
* struct codec_priv - CODEC private data
* @mclk_freq: Clock rate of MCLK
+ * @free_freq: Clock rate of MCLK for hw_free()
* @mclk_id: MCLK (or main clock) id for set_sysclk()
* @fll_id: FLL (or secordary clock) id for set_sysclk()
* @pll_id: PLL id for set_pll()
*/
struct codec_priv {
unsigned long mclk_freq;
+ unsigned long free_freq;
u32 mclk_id;
u32 fll_id;
u32 pll_id;
@@ -235,10 +238,10 @@ static int fsl_asoc_card_hw_free(struct snd_pcm_substream *substream)
priv->streams &= ~BIT(substream->stream);
if (!priv->streams && codec_priv->pll_id && codec_priv->fll_id) {
- /* Force freq to be 0 to avoid error message in codec */
+ /* Force freq to be free_freq to avoid error message in codec */
ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0),
codec_priv->mclk_id,
- 0,
+ codec_priv->free_freq,
SND_SOC_CLOCK_IN);
if (ret) {
dev_err(dev, "failed to switch away from FLL: %d\n", ret);
@@ -665,6 +668,15 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
priv->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
priv->card.dapm_routes = audio_map_rx;
priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_rx);
+ } else if (of_device_is_compatible(np, "fsl,imx-audio-wm8958")) {
+ codec_dai_name = "wm8994-aif1";
+ priv->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+ priv->codec_priv.mclk_id = WM8994_FLL_SRC_MCLK1;
+ priv->codec_priv.fll_id = WM8994_SYSCLK_FLL1;
+ priv->codec_priv.pll_id = WM8994_FLL1;
+ priv->codec_priv.free_freq = priv->codec_priv.mclk_freq;
+ priv->card.dapm_routes = NULL;
+ priv->card.num_dapm_routes = 0;
} else {
dev_err(&pdev->dev, "unknown Device Tree compatible\n");
ret = -EINVAL;
@@ -882,6 +894,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = {
{ .compatible = "fsl,imx-audio-mqs", },
{ .compatible = "fsl,imx-audio-wm8524", },
{ .compatible = "fsl,imx-audio-si476x", },
+ { .compatible = "fsl,imx-audio-wm8958", },
{}
};
MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids);
--
2.27.0
next reply other threads:[~2021-03-17 13:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-17 13:05 Shengjiu Wang [this message]
2021-03-17 13:05 ` [PATCH 2/2] ASoC: bindings: fsl-asoc-card: add compatible string for WM8958 codec Shengjiu Wang
2021-03-25 17:37 ` [PATCH 1/2] ASoC: fsl-asoc-card: Add support " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1615986303-27959-1-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).