From: Steen Hegelund <steen.hegelund@microchip.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Device Tree List <devicetree@vger.kernel.org>
Cc: Steen Hegelund <steen.hegelund@microchip.com>,
Andrew Lunn <andrew@lunn.ch>,
Russell King <linux@armlinux.org.uk>,
"Microchip Linux Driver Support" <UNGLinuxDriver@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Madalin Bucur <madalin.bucur@oss.nxp.com>,
Mark Einon <mark.einon@gmail.com>,
Masahiro Yamada <masahiroy@kernel.org>,
Arnd Bergmann <arnd@arndb.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Simon Horman" <simon.horman@netronome.com>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
"Lars Povlsen" <lars.povlsen@microchip.com>,
Bjarni Jonasson <bjarni.jonasson@microchip.com>
Subject: [PATCH net-next 01/10] dt-bindings: net: sparx5: Add sparx5-switch bindings
Date: Fri, 16 Apr 2021 15:16:48 +0200 [thread overview]
Message-ID: <20210416131657.3151464-2-steen.hegelund@microchip.com> (raw)
In-Reply-To: <20210416131657.3151464-1-steen.hegelund@microchip.com>
Document the Sparx5 switch device driver bindings
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
---
.../bindings/net/microchip,sparx5-switch.yaml | 227 ++++++++++++++++++
1 file changed, 227 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
new file mode 100644
index 000000000000..2eeb5230d8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Ethernet switch controller
+
+maintainers:
+ - Steen Hegelund <steen.hegelund@microchip.com>
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+ The SparX-5 Enterprise Ethernet switch family provides a rich set of
+ Enterprise switching features such as advanced TCAM-based VLAN and
+ QoS processing enabling delivery of differentiated services, and
+ security through TCAM-based frame processing using versatile content
+ aware processor (VCAP).
+
+ IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
+ with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
+ IPv6 (S,G) multicast groups.
+
+ L3 security features include source guard and reverse path
+ forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
+ IP tunnels (IP over GRE/IP).
+
+ The SparX-5 switch family targets managed Layer 2 and Layer 3
+ equipment in SMB, SME, and Enterprise where high port count
+ 1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
+
+properties:
+ $nodename:
+ pattern: "^switch@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,sparx5-switch
+
+ reg:
+ minItems: 3
+ items:
+ - description: cpu target
+ - description: devices target
+ - description: general control block target
+
+ reg-names:
+ items:
+ - const: cpu
+ - const: devices
+ - const: gcb
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: register based extraction
+ - description: frame dma based extraction
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: xtr
+ - const: fdma
+
+ resets:
+ items:
+ - description: Reset controller used for switch core reset (soft reset)
+
+ reset-names:
+ items:
+ - const: switch
+
+ mac-address: true
+
+ ethernet-ports:
+ type: object
+ patternProperties:
+ "^port@[0-9a-f]+$":
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 0
+
+ reg:
+ description: Switch port number
+
+ phys:
+ maxItems: 1
+ description:
+ phandle of a Ethernet SerDes PHY. This defines which SerDes
+ instance will handle the Ethernet traffic.
+
+ phy-mode:
+ description:
+ This specifies the interface used by the Ethernet SerDes towards
+ the PHY or SFP.
+
+ microchip,bandwidth:
+ description: Specifies bandwidth in Mbit/s allocated to the port.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ maximum: 25000
+
+ phy-handle:
+ description:
+ phandle of a Ethernet PHY. This is optional and if provided it
+ points to the cuPHY used by the Ethernet SerDes.
+
+ sfp:
+ description:
+ phandle of an SFP. This is optional and used when not specifying
+ a cuPHY. It points to the SFP node that describes the SFP used by
+ the Ethernet SerDes.
+
+ managed: true
+
+ microchip,sd-sgpio:
+ description:
+ Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
+ This is optional, and only needed if the default used index is
+ is not correct.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 383
+
+ required:
+ - reg
+ - phys
+ - phy-mode
+ - microchip,bandwidth
+
+ oneOf:
+ - required:
+ - phy-handle
+ - required:
+ - sfp
+ - managed
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - resets
+ - reset-names
+ - ethernet-ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ switch: switch@600000000 {
+ compatible = "microchip,sparx5-switch";
+ reg = <0 0x401000>,
+ <0x10004000 0x7fc000>,
+ <0x11010000 0xaf0000>;
+ reg-names = "cpu", "devices", "gcb";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "xtr";
+ resets = <&reset 0>;
+ reset-names = "switch";
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port@0 {
+ reg = <0>;
+ microchip,bandwidth = <1000>;
+ phys = <&serdes 13>;
+ phy-handle = <&phy0>;
+ phy-mode = "qsgmii";
+ };
+ /* ... */
+ /* Then the 25G interfaces */
+ port60: port@60 {
+ reg = <60>;
+ microchip,bandwidth = <25000>;
+ phys = <&serdes 29>;
+ phy-mode = "10gbase-r";
+ sfp = <&sfp_eth60>;
+ managed = "in-band-status";
+ microchip,sd-sgpio = <365>;
+ };
+ port61: port@61 {
+ reg = <61>;
+ microchip,bandwidth = <25000>;
+ phys = <&serdes 30>;
+ phy-mode = "10gbase-r";
+ sfp = <&sfp_eth61>;
+ managed = "in-band-status";
+ microchip,sd-sgpio = <369>;
+ };
+ port62: port@62 {
+ reg = <62>;
+ microchip,bandwidth = <25000>;
+ phys = <&serdes 31>;
+ phy-mode = "10gbase-r";
+ sfp = <&sfp_eth62>;
+ managed = "in-band-status";
+ microchip,sd-sgpio = <373>;
+ };
+ port63: port@63 {
+ reg = <63>;
+ microchip,bandwidth = <25000>;
+ phys = <&serdes 32>;
+ phy-mode = "10gbase-r";
+ sfp = <&sfp_eth63>;
+ managed = "in-band-status";
+ microchip,sd-sgpio = <377>;
+ };
+ /* Finally the Management interface */
+ port64: port@64 {
+ reg = <64>;
+ microchip,bandwidth = <1000>;
+ phys = <&serdes 0>;
+ phy-handle = <&phy64>;
+ phy-mode = "sgmii";
+ mac-address = [ 00 00 00 01 02 03 ];
+ };
+ };
+ };
+
+...
+# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
--
2.31.1
next prev parent reply other threads:[~2021-04-16 13:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 13:16 [PATCH net-next 00/10] Adding the Sparx5 Switch Driver Steen Hegelund
2021-04-16 13:16 ` Steen Hegelund [this message]
2021-04-21 22:44 ` [PATCH net-next 01/10] dt-bindings: net: sparx5: Add sparx5-switch bindings Rob Herring
2021-04-16 13:16 ` [PATCH net-next 02/10] net: sparx5: add the basic sparx5 driver Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 03/10] net: sparx5: add hostmode with phylink support Steen Hegelund
2021-04-16 21:22 ` Jakub Kicinski
2021-04-20 12:54 ` Steen.Hegelund
2021-04-16 13:16 ` [PATCH net-next 04/10] net: sparx5: add port module support Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 05/10] net: sparx5: add mactable support Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 06/10] net: sparx5: add vlan support Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 07/10] net: sparx5: add switching support Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 08/10] net: sparx5: add calendar bandwidth allocation support Steen Hegelund
2021-04-16 13:16 ` [PATCH net-next 09/10] net: sparx5: add ethtool configuration and statistics support Steen Hegelund
2021-04-16 21:26 ` Jakub Kicinski
2021-04-20 12:54 ` Steen.Hegelund
2021-04-16 13:16 ` [PATCH net-next 10/10] arm64: dts: sparx5: Add the Sparx5 switch node Steen Hegelund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210416131657.3151464-2-steen.hegelund@microchip.com \
--to=steen.hegelund@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=bjarni.jonasson@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=lars.povlsen@microchip.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@oss.nxp.com \
--cc=mark.einon@gmail.com \
--cc=masahiroy@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=simon.horman@netronome.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).