From: Ansuel Smith <ansuelsmth@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 03/14] drivers: net: mdio: mdio-ip8064: improve busy wait delay
Date: Fri, 23 Apr 2021 03:47:29 +0200 [thread overview]
Message-ID: <20210423014741.11858-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210423014741.11858-1-ansuelsmth@gmail.com>
With the use of the qca8k dsa driver, some problem arised related to
port status detection. With a load on a specific port (for example a
simple speed test), the driver starts to bheave in a strange way and
garbage data is produced. To address this, enlarge the sleep delay and
address a bug for the reg offset 31 that require additional delay for
this specific reg.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/mdio/mdio-ipq8064.c | 36 ++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 14 deletions(-)
diff --git a/drivers/net/mdio/mdio-ipq8064.c b/drivers/net/mdio/mdio-ipq8064.c
index 1bd18857e1c5..5bd6d0501642 100644
--- a/drivers/net/mdio/mdio-ipq8064.c
+++ b/drivers/net/mdio/mdio-ipq8064.c
@@ -15,25 +15,26 @@
#include <linux/mfd/syscon.h>
/* MII address register definitions */
-#define MII_ADDR_REG_ADDR 0x10
-#define MII_BUSY BIT(0)
-#define MII_WRITE BIT(1)
-#define MII_CLKRANGE_60_100M (0 << 2)
-#define MII_CLKRANGE_100_150M (1 << 2)
-#define MII_CLKRANGE_20_35M (2 << 2)
-#define MII_CLKRANGE_35_60M (3 << 2)
-#define MII_CLKRANGE_150_250M (4 << 2)
-#define MII_CLKRANGE_250_300M (5 << 2)
+#define MII_ADDR_REG_ADDR 0x10
+#define MII_BUSY BIT(0)
+#define MII_WRITE BIT(1)
+#define MII_CLKRANGE(x) ((x) << 2)
+#define MII_CLKRANGE_60_100M MII_CLKRANGE(0)
+#define MII_CLKRANGE_100_150M MII_CLKRANGE(1)
+#define MII_CLKRANGE_20_35M MII_CLKRANGE(2)
+#define MII_CLKRANGE_35_60M MII_CLKRANGE(3)
+#define MII_CLKRANGE_150_250M MII_CLKRANGE(4)
+#define MII_CLKRANGE_250_300M MII_CLKRANGE(5)
#define MII_CLKRANGE_MASK GENMASK(4, 2)
#define MII_REG_SHIFT 6
#define MII_REG_MASK GENMASK(10, 6)
#define MII_ADDR_SHIFT 11
#define MII_ADDR_MASK GENMASK(15, 11)
-#define MII_DATA_REG_ADDR 0x14
+#define MII_DATA_REG_ADDR 0x14
-#define MII_MDIO_DELAY_USEC (1000)
-#define MII_MDIO_RETRY_MSEC (10)
+#define MII_MDIO_DELAY_USEC (1000)
+#define MII_MDIO_RETRY_MSEC (10)
struct ipq8064_mdio {
struct regmap *base; /* NSS_GMAC0_BASE */
@@ -65,7 +66,7 @@ ipq8064_mdio_read(struct mii_bus *bus, int phy_addr, int reg_offset)
((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
- usleep_range(8, 10);
+ usleep_range(10, 13);
err = ipq8064_mdio_wait_busy(priv);
if (err)
@@ -91,7 +92,14 @@ ipq8064_mdio_write(struct mii_bus *bus, int phy_addr, int reg_offset, u16 data)
((reg_offset << MII_REG_SHIFT) & MII_REG_MASK);
regmap_write(priv->base, MII_ADDR_REG_ADDR, miiaddr);
- usleep_range(8, 10);
+
+ /* For the specific reg 31 extra time is needed or the next
+ * read will produce grabage data.
+ */
+ if (reg_offset == 31)
+ usleep_range(30, 43);
+ else
+ usleep_range(10, 13);
return ipq8064_mdio_wait_busy(priv);
}
--
2.30.2
next prev parent reply other threads:[~2021-04-23 1:48 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 1:47 [PATCH 00/14] Multiple improvement to qca8k stability Ansuel Smith
2021-04-23 1:47 ` [PATCH 01/14] drivers: net: dsa: qca8k: handle error with set_page Ansuel Smith
2021-04-23 1:52 ` Florian Fainelli
2021-04-23 1:47 ` [PATCH 02/14] drivers: net: dsa: qca8k: tweak internal delay to oem spec Ansuel Smith
2021-04-23 1:53 ` Florian Fainelli
2021-04-23 1:57 ` Ansuel Smith
2021-04-23 1:58 ` Florian Fainelli
2021-04-23 12:25 ` Andrew Lunn
2021-04-23 1:47 ` Ansuel Smith [this message]
2021-04-23 1:56 ` [PATCH 03/14] drivers: net: mdio: mdio-ip8064: improve busy wait delay Florian Fainelli
2021-04-23 2:03 ` Ansuel Smith
2021-04-23 12:38 ` Andrew Lunn
2021-04-23 1:47 ` [PATCH 04/14] drivers: net: dsa: qca8k: apply suggested packet priority Ansuel Smith
2021-04-23 1:47 ` [PATCH 05/14] drivers: net: dsa: qca8k: add support for qca8327 switch Ansuel Smith
2021-04-23 12:42 ` Andrew Lunn
2021-04-23 1:47 ` [PATCH 06/14] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-04-23 1:47 ` [PATCH 07/14] drivers: net: dsa: qca8k: limit priority tweak to qca8337 switch Ansuel Smith
2021-04-23 1:59 ` Florian Fainelli
2021-04-23 1:47 ` [PATCH 08/14] drivers: net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-04-23 1:47 ` [PATCH 09/14] drivers: net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-04-23 1:47 ` [PATCH 10/14] drivers: net: dsa: qca8k: add support for specific QCA access function Ansuel Smith
2021-04-23 12:47 ` Andrew Lunn
2021-04-23 1:47 ` [PATCH 11/14] drivers: net: dsa: qca8k: apply switch revision fix Ansuel Smith
2021-04-23 2:02 ` Florian Fainelli
2021-04-24 21:18 ` Ansuel Smith
2021-04-24 21:49 ` Heiner Kallweit
2021-04-25 1:09 ` Florian Fainelli
2021-04-25 1:19 ` Ansuel Smith
2021-04-25 4:45 ` DENG Qingfang
2021-04-25 11:59 ` Ansuel Smith
2021-04-25 14:33 ` Andrew Lunn
2021-04-23 1:47 ` [PATCH 12/14] drivers: net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-04-23 1:47 ` [PATCH 13/14] drivers: net: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-04-23 12:53 ` Andrew Lunn
2021-04-23 1:47 ` [PATCH 14/14] drivers: net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-04-23 1:51 ` [PATCH 00/14] Multiple improvement to qca8k stability Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210423014741.11858-4-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).