From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux PM list <linux-pm@vger.kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Juri Lelli <juri.lelli@arm.com>,
Steve Muckle <steve.muckle@linaro.org>,
Saravana Kannan <skannan@codeaurora.org>
Subject: [PATCH 1/11] cpufreq: Clean up default and fallback governor setup
Date: Thu, 04 Feb 2016 00:14:34 +0100 [thread overview]
Message-ID: <8241294.RLKfcoktTC@vostro.rjw.lan> (raw)
In-Reply-To: <3705929.bslqXH980s@vostro.rjw.lan>
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The preprocessor magic used for setting the default cpufreq governor
(and for using the performance governor as a fallback one for that
matter) is really nasty, so replace it with __weak functions and
overrides.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
drivers/cpufreq/cpufreq.c | 37 ++++++++++++++++++---------------
drivers/cpufreq/cpufreq_conservative.c | 10 +++++---
drivers/cpufreq/cpufreq_ondemand.c | 34 ++++++++++++++++--------------
drivers/cpufreq/cpufreq_performance.c | 18 ++++++++++++----
drivers/cpufreq/cpufreq_powersave.c | 10 +++++---
drivers/cpufreq/cpufreq_userspace.c | 10 +++++---
include/linux/cpufreq.h | 25 +---------------------
7 files changed, 73 insertions(+), 71 deletions(-)
Index: linux-pm/drivers/cpufreq/cpufreq.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq.c
+++ linux-pm/drivers/cpufreq/cpufreq.c
@@ -1003,6 +1003,11 @@ static int cpufreq_add_dev_interface(str
return cpufreq_add_dev_symlink(policy);
}
+__weak struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return NULL;
+}
+
static int cpufreq_init_policy(struct cpufreq_policy *policy)
{
struct cpufreq_governor *gov = NULL;
@@ -1012,11 +1017,14 @@ static int cpufreq_init_policy(struct cp
/* Update governor of new_policy to the governor used before hotplug */
gov = find_governor(policy->last_governor);
- if (gov)
+ if (gov) {
pr_debug("Restoring governor %s for cpu %d\n",
policy->governor->name, policy->cpu);
- else
- gov = CPUFREQ_DEFAULT_GOVERNOR;
+ } else {
+ gov = cpufreq_default_governor();
+ if (!gov)
+ return -ENODATA;
+ }
new_policy.governor = gov;
@@ -1964,21 +1972,16 @@ int cpufreq_driver_target(struct cpufreq
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
+__weak struct cpufreq_governor *cpufreq_fallback_governor(void)
+{
+ return NULL;
+}
+
static int __cpufreq_governor(struct cpufreq_policy *policy,
unsigned int event)
{
int ret;
- /* Only must be defined when default governor is known to have latency
- restrictions, like e.g. conservative or ondemand.
- That this is the case is already ensured in Kconfig
- */
-#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
- struct cpufreq_governor *gov = &cpufreq_gov_performance;
-#else
- struct cpufreq_governor *gov = NULL;
-#endif
-
/* Don't start any governor operations if we are entering suspend */
if (cpufreq_suspended)
return 0;
@@ -1992,12 +1995,14 @@ static int __cpufreq_governor(struct cpu
if (policy->governor->max_transition_latency &&
policy->cpuinfo.transition_latency >
policy->governor->max_transition_latency) {
- if (!gov)
- return -EINVAL;
- else {
+ struct cpufreq_governor *gov = cpufreq_fallback_governor();
+
+ if (gov) {
pr_warn("%s governor failed, too long transition latency of HW, fallback to %s governor\n",
policy->governor->name, gov->name);
policy->governor = gov;
+ } else {
+ return -EINVAL;
}
}
Index: linux-pm/drivers/cpufreq/cpufreq_conservative.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_conservative.c
+++ linux-pm/drivers/cpufreq/cpufreq_conservative.c
@@ -26,10 +26,7 @@ static DEFINE_PER_CPU(struct cs_cpu_dbs_
static int cs_cpufreq_governor_dbs(struct cpufreq_policy *policy,
unsigned int event);
-#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
-static
-#endif
-struct cpufreq_governor cpufreq_gov_conservative = {
+static struct cpufreq_governor cpufreq_gov_conservative = {
.name = "conservative",
.governor = cs_cpufreq_governor_dbs,
.max_transition_latency = TRANSITION_LATENCY_LIMIT,
@@ -397,6 +394,11 @@ MODULE_DESCRIPTION("'cpufreq_conservativ
MODULE_LICENSE("GPL");
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &cpufreq_gov_conservative;
+}
+
fs_initcall(cpufreq_gov_dbs_init);
#else
module_init(cpufreq_gov_dbs_init);
Index: linux-pm/include/linux/cpufreq.h
===================================================================
--- linux-pm.orig/include/linux/cpufreq.h
+++ linux-pm/include/linux/cpufreq.h
@@ -471,29 +471,8 @@ int __cpufreq_driver_target(struct cpufr
int cpufreq_register_governor(struct cpufreq_governor *governor);
void cpufreq_unregister_governor(struct cpufreq_governor *governor);
-/* CPUFREQ DEFAULT GOVERNOR */
-/*
- * Performance governor is fallback governor if any other gov failed to auto
- * load due latency restrictions
- */
-#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
-extern struct cpufreq_governor cpufreq_gov_performance;
-#endif
-#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
-#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_performance)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE)
-extern struct cpufreq_governor cpufreq_gov_powersave;
-#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_powersave)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
-extern struct cpufreq_governor cpufreq_gov_userspace;
-#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_userspace)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
-extern struct cpufreq_governor cpufreq_gov_ondemand;
-#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_ondemand)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
-extern struct cpufreq_governor cpufreq_gov_conservative;
-#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_conservative)
-#endif
+struct cpufreq_governor *cpufreq_default_governor(void);
+struct cpufreq_governor *cpufreq_fallback_governor(void);
/*********************************************************************
* FREQUENCY TABLE HELPERS *
Index: linux-pm/drivers/cpufreq/cpufreq_ondemand.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_ondemand.c
+++ linux-pm/drivers/cpufreq/cpufreq_ondemand.c
@@ -553,6 +553,19 @@ static struct common_dbs_data od_dbs_cda
.mutex = __MUTEX_INITIALIZER(od_dbs_cdata.mutex),
};
+static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
+ unsigned int event)
+{
+ return cpufreq_governor_dbs(policy, &od_dbs_cdata, event);
+}
+
+static struct cpufreq_governor cpufreq_gov_ondemand = {
+ .name = "ondemand",
+ .governor = od_cpufreq_governor_dbs,
+ .max_transition_latency = TRANSITION_LATENCY_LIMIT,
+ .owner = THIS_MODULE,
+};
+
static void od_set_powersave_bias(unsigned int powersave_bias)
{
struct cpufreq_policy *policy;
@@ -604,22 +617,6 @@ void od_unregister_powersave_bias_handle
}
EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler);
-static int od_cpufreq_governor_dbs(struct cpufreq_policy *policy,
- unsigned int event)
-{
- return cpufreq_governor_dbs(policy, &od_dbs_cdata, event);
-}
-
-#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
-static
-#endif
-struct cpufreq_governor cpufreq_gov_ondemand = {
- .name = "ondemand",
- .governor = od_cpufreq_governor_dbs,
- .max_transition_latency = TRANSITION_LATENCY_LIMIT,
- .owner = THIS_MODULE,
-};
-
static int __init cpufreq_gov_dbs_init(void)
{
return cpufreq_register_governor(&cpufreq_gov_ondemand);
@@ -637,6 +634,11 @@ MODULE_DESCRIPTION("'cpufreq_ondemand' -
MODULE_LICENSE("GPL");
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &cpufreq_gov_ondemand;
+}
+
fs_initcall(cpufreq_gov_dbs_init);
#else
module_init(cpufreq_gov_dbs_init);
Index: linux-pm/drivers/cpufreq/cpufreq_performance.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_performance.c
+++ linux-pm/drivers/cpufreq/cpufreq_performance.c
@@ -33,10 +33,7 @@ static int cpufreq_governor_performance(
return 0;
}
-#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE_MODULE
-static
-#endif
-struct cpufreq_governor cpufreq_gov_performance = {
+static struct cpufreq_governor cpufreq_gov_performance = {
.name = "performance",
.governor = cpufreq_governor_performance,
.owner = THIS_MODULE,
@@ -52,6 +49,19 @@ static void __exit cpufreq_gov_performan
cpufreq_unregister_governor(&cpufreq_gov_performance);
}
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &cpufreq_gov_performance;
+}
+#endif
+#ifndef CONFIG_CPU_FREQ_GOV_PERFORMANCE_MODULE
+struct cpufreq_governor *cpufreq_fallback_governor(void)
+{
+ return &cpufreq_gov_performance;
+}
+#endif
+
MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
MODULE_LICENSE("GPL");
Index: linux-pm/drivers/cpufreq/cpufreq_powersave.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_powersave.c
+++ linux-pm/drivers/cpufreq/cpufreq_powersave.c
@@ -33,10 +33,7 @@ static int cpufreq_governor_powersave(st
return 0;
}
-#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE
-static
-#endif
-struct cpufreq_governor cpufreq_gov_powersave = {
+static struct cpufreq_governor cpufreq_gov_powersave = {
.name = "powersave",
.governor = cpufreq_governor_powersave,
.owner = THIS_MODULE,
@@ -57,6 +54,11 @@ MODULE_DESCRIPTION("CPUfreq policy gover
MODULE_LICENSE("GPL");
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &cpufreq_gov_powersave;
+}
+
fs_initcall(cpufreq_gov_powersave_init);
#else
module_init(cpufreq_gov_powersave_init);
Index: linux-pm/drivers/cpufreq/cpufreq_userspace.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_userspace.c
+++ linux-pm/drivers/cpufreq/cpufreq_userspace.c
@@ -89,10 +89,7 @@ static int cpufreq_governor_userspace(st
return rc;
}
-#ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE
-static
-#endif
-struct cpufreq_governor cpufreq_gov_userspace = {
+static struct cpufreq_governor cpufreq_gov_userspace = {
.name = "userspace",
.governor = cpufreq_governor_userspace,
.store_setspeed = cpufreq_set,
@@ -116,6 +113,11 @@ MODULE_DESCRIPTION("CPUfreq policy gover
MODULE_LICENSE("GPL");
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &cpufreq_gov_userspace;
+}
+
fs_initcall(cpufreq_gov_userspace_init);
#else
module_init(cpufreq_gov_userspace_init);
next prev parent reply other threads:[~2016-02-03 23:41 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 23:12 [PATCH 0/11] cpufreq: governor: ondemand/conservative data structures rework Rafael J. Wysocki
2016-02-03 23:14 ` Rafael J. Wysocki [this message]
2016-02-04 0:55 ` [PATCH 1/11] cpufreq: Clean up default and fallback governor setup Saravana Kannan
2016-02-04 5:03 ` Viresh Kumar
2016-02-03 23:16 ` [PATCH 2/11] cpufreq: governor: Use common mutex for dbs_data protection Rafael J. Wysocki
2016-02-04 0:59 ` Saravana Kannan
2016-02-04 5:09 ` Viresh Kumar
2016-02-04 16:46 ` Rafael J. Wysocki
2016-02-05 2:59 ` Viresh Kumar
2016-02-05 3:06 ` Rafael J. Wysocki
2016-02-05 3:15 ` Rafael J. Wysocki
2016-02-05 3:17 ` Rafael J. Wysocki
2016-02-05 3:24 ` Viresh Kumar
2016-02-05 3:33 ` Rafael J. Wysocki
2016-02-05 3:22 ` Viresh Kumar
2016-02-03 23:22 ` [PATCH 3/11] cpufreq: governor: Use common global_dbs_data pointer Rafael J. Wysocki
2016-02-04 1:11 ` Saravana Kannan
2016-02-04 1:25 ` Rafael J. Wysocki
2016-02-04 1:40 ` Saravana Kannan
2016-02-04 5:38 ` Viresh Kumar
2016-02-04 1:47 ` Saravana Kannan
2016-02-04 5:36 ` Viresh Kumar
[not found] ` <CAHZ_5WxJSDtFyFdCc-D2=HSaPON=3rzUxpxPYsCyZvrV1Nv3qw@mail.gmail.com>
2016-02-04 8:25 ` Viresh Kumar
2016-02-04 11:31 ` Gautham R Shenoy
2016-02-04 11:35 ` Viresh Kumar
2016-02-04 16:52 ` Rafael J. Wysocki
2016-02-05 3:02 ` Viresh Kumar
2016-02-05 3:10 ` Rafael J. Wysocki
2016-02-03 23:29 ` [PATCH 4/11] cpufreq: governor: Avoid passing dbs_data pointers around unnecessarily Rafael J. Wysocki
2016-02-04 1:37 ` Saravana Kannan
2016-02-03 23:31 ` [PATCH 5/11] cpufreq: governor: Put governor structure into common_dbs_data Rafael J. Wysocki
2016-02-04 1:57 ` Saravana Kannan
2016-02-03 23:32 ` [PATCH 6/11] cpufreq: governor: Rename some data types and variables Rafael J. Wysocki
2016-02-03 23:33 ` [PATCH 7/11] cpufreq: governor: Rework cpufreq_governor_dbs() Rafael J. Wysocki
2016-02-04 2:03 ` Saravana Kannan
2016-02-03 23:35 ` [PATCH 8/11] cpufreq: governor: Drop the gov pointer from struct dbs_data Rafael J. Wysocki
2016-02-03 23:35 ` [PATCH 9/11] cpufreq: governor: Rename cpu_common_dbs_info to policy_dbs_info Rafael J. Wysocki
2016-02-03 23:37 ` [PATCH 10/11] cpufreq: governor: Rearrange governor data structures Rafael J. Wysocki
2016-02-03 23:38 ` [PATCH 11/11] cpufreq: governor: Drop cpu argument from dbs_check_cpu() Rafael J. Wysocki
2016-02-04 5:40 ` [PATCH 0/11] cpufreq: governor: ondemand/conservative data structures rework Viresh Kumar
2016-02-04 17:22 ` Rafael J. Wysocki
2016-02-05 2:07 ` [PATCH v2 0/10] " Rafael J. Wysocki
2016-02-05 2:11 ` [PATCH v2 1/10] cpufreq: Clean up default and fallback governor setup Rafael J. Wysocki
2016-02-10 5:15 ` Gautham R Shenoy
2016-02-10 5:48 ` Gautham R Shenoy
2016-02-05 2:14 ` [PATCH v2 2/10] cpufreq: governor: Use common mutex for dbs_data protection Rafael J. Wysocki
2016-02-05 6:53 ` Viresh Kumar
2016-02-05 22:59 ` Rafael J. Wysocki
2016-02-07 9:31 ` Viresh Kumar
2016-02-07 14:33 ` Rafael J. Wysocki
2016-02-05 2:15 ` [PATCH v2 3/10] cpufreq: governor: Avoid passing dbs_data pointers around unnecessarily Rafael J. Wysocki
2016-02-05 7:09 ` Viresh Kumar
2016-02-05 2:16 ` [PATCH v2 4/10] cpufreq: governor: Put governor structure into common_dbs_data Rafael J. Wysocki
2016-02-05 7:13 ` Viresh Kumar
2016-02-05 2:17 ` [PATCH v2 5/10] cpufreq: governor: Rename some data types and variables Rafael J. Wysocki
2016-02-05 7:17 ` Viresh Kumar
2016-02-05 2:18 ` [PATCH v2 6/10] cpufreq: governor: Rework cpufreq_governor_dbs() Rafael J. Wysocki
2016-02-05 8:14 ` Viresh Kumar
2016-02-05 2:19 ` [PATCH v2 7/10] cpufreq: governor: Drop the gov pointer from struct dbs_data Rafael J. Wysocki
2016-02-05 8:28 ` Viresh Kumar
2016-02-05 2:20 ` [PATCH v2 8/10] cpufreq: governor: Rename cpu_common_dbs_info to policy_dbs_info Rafael J. Wysocki
2016-02-05 8:34 ` Viresh Kumar
2016-02-05 22:50 ` Rafael J. Wysocki
2016-02-06 12:48 ` [PATCH v3 " Rafael J. Wysocki
2016-02-07 9:31 ` Viresh Kumar
2016-02-05 2:21 ` [PATCH v2 9/10] cpufreq: governor: Rearrange governor data structures Rafael J. Wysocki
2016-02-05 9:13 ` Viresh Kumar
2016-02-05 22:47 ` Rafael J. Wysocki
2016-02-07 9:29 ` Viresh Kumar
2016-02-07 14:34 ` Rafael J. Wysocki
2016-02-05 2:21 ` [PATCH v2 10/10] cpufreq: governor: Drop cpu argument from dbs_check_cpu() Rafael J. Wysocki
2016-02-05 9:15 ` Viresh Kumar
2016-02-06 12:50 ` [PATCH v3 " Rafael J. Wysocki
2016-02-07 9:32 ` Viresh Kumar
2016-02-06 12:44 ` [PATCH v2 0/10] cpufreq: governor: ondemand/conservative data structures rework Rafael J. Wysocki
2016-02-07 15:22 ` [PATCH 0/3] cpufreq: governor: Data structure rearrangement Rafael J. Wysocki
2016-02-07 15:23 ` [PATCH 1/3] cpufreq: governor: Simplify cpufreq_governor_limits() Rafael J. Wysocki
2016-02-07 15:40 ` Viresh Kumar
2016-02-08 0:59 ` Rafael J. Wysocki
2016-02-07 15:24 ` [PATCH 2/3] cpufreq: governor: Rearrange governor data structures Rafael J. Wysocki
2016-02-07 15:45 ` Viresh Kumar
2016-02-07 15:54 ` Viresh Kumar
2016-02-07 15:55 ` Viresh Kumar
2016-02-07 15:25 ` [PATCH 3/3] cpufreq: governor: Symmetrize cpu_dbs_info initialization and cleanup Rafael J. Wysocki
2016-02-07 15:52 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8241294.RLKfcoktTC@vostro.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=juri.lelli@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=skannan@codeaurora.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=steve.muckle@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).