From: Palmer Dabbelt <palmer@sifive.com>
To: gregkh@linuxfoundation.org, jslaby@suse.com
Cc: patches@groups.riscv.org, linux-kernel@vger.kernel.org,
Palmer Dabbelt <palmer@dabbelt.com>
Subject: [PATCH] tty: New RISC-V SBI console driver
Date: Thu, 7 Dec 2017 16:10:15 -0800 [thread overview]
Message-ID: <20171208001015.27735-1-palmer@sifive.com> (raw)
From: Palmer Dabbelt <palmer@dabbelt.com>
The RISC-V ISA defines a simple console that is availiable via SBI calls
on all systems. This patch adds a driver for this console interface
that can act as both a target for early printk and as the system
console. The core arch code already enables the early printk support
when CONFIG_HVC_RISCV_SBI is defined.
There is one checkpatch.pl warning here: to check the MAINTAINERS file.
They're all matched by the "K: riscv" line.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
---
arch/riscv/include/asm/hvc_riscv_sbi.h | 12 ++++++
drivers/tty/hvc/Kconfig | 11 +++++
drivers/tty/hvc/Makefile | 1 +
drivers/tty/hvc/hvc_riscv_sbi.c | 75 ++++++++++++++++++++++++++++++++++
4 files changed, 99 insertions(+)
create mode 100644 arch/riscv/include/asm/hvc_riscv_sbi.h
create mode 100644 drivers/tty/hvc/hvc_riscv_sbi.c
diff --git a/arch/riscv/include/asm/hvc_riscv_sbi.h b/arch/riscv/include/asm/hvc_riscv_sbi.h
new file mode 100644
index 000000000000..41723ed7bd97
--- /dev/null
+++ b/arch/riscv/include/asm/hvc_riscv_sbi.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_RISCV_HVC_RISCV_SBI_H
+#define _ASM_RISCV_HVC_RISCV_SBI_H
+
+/*
+ * We always support CONFIG_EARLY_PRINTK via the SBI console driver because it
+ * works well enough that there's no penalty to doing so.
+ */
+extern struct console riscv_sbi_early_console_dev __initdata;
+
+#endif
diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index fec457edad14..5e267bb002af 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -97,6 +97,17 @@ config HVC_BFIN_JTAG
the HVC driver. If you don't have JTAG, then you probably don't
want this option.
+config HVC_RISCV_SBI
+ bool "RISC-V SBI console support"
+ depends on RISCV
+ select HVC_DRIVER
+ default y
+ help
+ This enables support for console output via RISC-V SBI calls, which
+ is normally used only during boot to output printk.
+
+ If you don't know what do to here, say Y.
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES && HVC_CONSOLE
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index 0b02ec7f1dfd..83079ae000ae 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_HVC_XEN) += hvc_xen.o
obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o
obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o
obj-$(CONFIG_HVC_BFIN_JTAG) += hvc_bfin_jtag.o
+obj-$(CONFIG_HVC_RISCV_SBI) += hvc_riscv_sbi.o
obj-$(CONFIG_HVCS) += hvcs.o
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
new file mode 100644
index 000000000000..83ef0dcc24e0
--- /dev/null
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/console.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/sbi.h>
+#include <asm/hvc_riscv_sbi.h>
+
+#include "hvc_console.h"
+
+static int hvc_sbi_tty_put(uint32_t vtermno, const char *buf, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ sbi_console_putchar(buf[i]);
+
+ return i;
+}
+
+static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
+{
+ int i, c;
+
+ for (i = 0; i < count; i++) {
+ c = sbi_console_getchar();
+ if (c < 0)
+ break;
+ buf[i] = c;
+ }
+
+ return i;
+}
+
+static const struct hv_ops hvc_sbi_ops = {
+ .get_chars = hvc_sbi_tty_get,
+ .put_chars = hvc_sbi_tty_put,
+};
+
+static int __init hvc_sbi_init(void)
+{
+ return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+}
+device_initcall(hvc_sbi_init);
+
+static int __init hvc_sbi_console_init(void)
+{
+ hvc_instantiate(0, 0, &hvc_sbi_ops);
+ add_preferred_console("hvc", 0, NULL);
+
+ return 0;
+}
+console_initcall(hvc_sbi_console_init);
+
+static void sbi_console_write(struct console *co, const char *buf,
+ unsigned int n)
+{
+ int i;
+
+ for (i = 0; i < n; ++i) {
+ if (buf[i] == '\n')
+ sbi_console_putchar('\r');
+ sbi_console_putchar(buf[i]);
+ }
+}
+
+struct console riscv_sbi_early_console_dev __initdata = {
+ .name = "early",
+ .write = sbi_console_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME,
+ .index = -1
+};
--
2.13.6
next reply other threads:[~2017-12-08 0:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 0:10 Palmer Dabbelt [this message]
2017-12-08 7:37 ` [PATCH] tty: New RISC-V SBI console driver Greg KH
2017-12-08 19:46 ` Palmer Dabbelt
2017-12-08 16:22 ` Karsten Merker
2017-12-08 16:59 ` Philippe Ombredanne
-- strict thread matches above, loose matches on Subject: below --
2017-06-27 4:53 Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171208001015.27735-1-palmer@sifive.com \
--to=palmer@sifive.com \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=patches@groups.riscv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).