linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
To: Joachim Eastwood <manabian@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>,
	Richard Weinberger <richard@nod.at>,
	linux-arm-kernel@lists.infradead.org,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	ldv-project@linuxtesting.org, Julia Lawall <julia.lawall@lip6.fr>,
	sil2review@lists.osadl.org
Subject: [PATCH] mtd: nxp-spifi: decrement flash_np refcnt on error paths
Date: Tue,  8 May 2018 23:47:36 +0300	[thread overview]
Message-ID: <1525812456-25877-1-git-send-email-khoroshilov@ispras.ru> (raw)

nxp_spifi_probe() increments refcnt of SPI flash device node by
of_get_next_available_child() and then it passes the node
to mtd device in nxp_spifi_setup_flash().
But if a failure happens before mtd_device_register() succeed,
the refcnt is left undecremented.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
---
 drivers/mtd/spi-nor/nxp-spifi.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
index 15374216d4d9..8919e31f2ab8 100644
--- a/drivers/mtd/spi-nor/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -294,7 +294,8 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
 			break;
 		default:
 			dev_err(spifi->dev, "unsupported rx-bus-width\n");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto err_node_put;
 		}
 	}
 
@@ -328,7 +329,8 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
 		break;
 	default:
 		dev_err(spifi->dev, "only mode 0 and 3 supported\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_node_put;
 	}
 
 	writel(ctrl, spifi->io_base + SPIFI_CTRL);
@@ -356,22 +358,26 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
 	ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
 	if (ret) {
 		dev_err(spifi->dev, "device scan failed\n");
-		return ret;
+		goto err_node_put;
 	}
 
 	ret = nxp_spifi_setup_memory_cmd(spifi);
 	if (ret) {
 		dev_err(spifi->dev, "memory command setup failed\n");
-		return ret;
+		goto err_node_put;
 	}
 
 	ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
 	if (ret) {
 		dev_err(spifi->dev, "mtd device parse failed\n");
-		return ret;
+		goto err_node_put;
 	}
 
 	return 0;
+
+err_node_put:
+	of_node_put(np);
+	return ret;
 }
 
 static int nxp_spifi_probe(struct platform_device *pdev)
-- 
2.7.4

             reply	other threads:[~2018-05-08 20:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-08 20:47 Alexey Khoroshilov [this message]
2018-05-09  9:42 ` [PATCH] mtd: nxp-spifi: decrement flash_np refcnt on error paths Boris Brezillon
2018-05-09 14:35   ` Alexey Khoroshilov
2018-05-09 14:39     ` Boris Brezillon
2018-05-09 14:56       ` [PATCH v2] mtd: nxp-spifi: release flash_np in nxp_spifi_probe() Alexey Khoroshilov
2018-05-09 15:03         ` Boris Brezillon
2018-05-09 15:11           ` [PATCH v3] " Alexey Khoroshilov
2018-07-07  6:58             ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525812456-25877-1-git-send-email-khoroshilov@ispras.ru \
    --to=khoroshilov@ispras.ru \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=julia.lawall@lip6.fr \
    --cc=ldv-project@linuxtesting.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=manabian@gmail.com \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    --cc=sil2review@lists.osadl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).