From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: wsa@the-dreams.de, robh+dt@kernel.org, afaerber@suse.de
Cc: linus.walleij@linaro.org, linux-i2c@vger.kernel.org,
liuwei@actions-semi.com, mp-cs@actions-semi.com,
96boards@ucrobotics.com, devicetree@vger.kernel.org,
andy.shevchenko@gmail.com, daniel.thompson@linaro.org,
amit.kucheria@linaro.org, linux-arm-kernel@lists.infradead.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
hzhang@ucrobotics.com, bdong@ucrobotics.com,
manivannanece23@gmail.com, thomas.liau@actions-semi.com,
jeff.chen@actions-semi.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 2/6] arm64: dts: actions: Add Actions Semiconductor S900 I2C controller nodes
Date: Sat, 30 Jun 2018 19:03:26 +0530 [thread overview]
Message-ID: <20180630133330.23858-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180630133330.23858-1-manivannan.sadhasivam@linaro.org>
Add I2C controller nodes for Actions Semiconductor S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/actions/s900.dtsi | 60 +++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
index 7ae8b931f000..6f7b89edbe4d 100644
--- a/arch/arm64/boot/dts/actions/s900.dtsi
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -174,6 +174,66 @@
#clock-cells = <1>;
};
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default>;
+ };
+
+ i2c1: i2c@e0172000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0172000 0 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default>;
+ };
+
+ i2c2: i2c@e0174000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default>;
+ };
+
+ i2c3: i2c@e0176000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0176000 0 0x1000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e0178000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e017a000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe017a000 0 0x1000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pinctrl: pinctrl@e01b0000 {
compatible = "actions,s900-pinctrl";
reg = <0x0 0xe01b0000 0x0 0x1000>;
--
2.17.1
next prev parent reply other threads:[~2018-06-30 13:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-30 13:33 [PATCH v3 0/6] Add Actions Semiconductor Owl S900 I2C support Manivannan Sadhasivam
2018-06-30 13:33 ` [PATCH v3 1/6] dt-bindings: i2c: Add binding for Actions Semiconductor Owl I2C controller Manivannan Sadhasivam
2018-06-30 13:33 ` Manivannan Sadhasivam [this message]
2018-06-30 20:57 ` [PATCH v3 2/6] arm64: dts: actions: Add Actions Semiconductor S900 I2C controller nodes Peter Rosin
2018-06-30 13:33 ` [PATCH v3 3/6] arm64: dts: actions: Add pinctrl definition for S900 I2C controller Manivannan Sadhasivam
2018-06-30 13:33 ` [PATCH v3 4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board Manivannan Sadhasivam
2018-06-30 13:33 ` [PATCH v3 5/6] i2c: Add Actions Semiconductor Owl family S900 I2C driver Manivannan Sadhasivam
2018-06-30 21:11 ` Andy Shevchenko
2018-07-01 8:13 ` Manivannan Sadhasivam
2018-07-01 8:41 ` Manivannan Sadhasivam
2018-07-01 9:11 ` Andy Shevchenko
2018-07-01 4:57 ` Peter Rosin
2018-07-01 8:08 ` Manivannan Sadhasivam
2018-06-30 13:33 ` [PATCH v3 6/6] MAINTAINERS: Add entry for Actions Semiconductor Owl " Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180630133330.23858-3-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=96boards@ucrobotics.com \
--cc=afaerber@suse.de \
--cc=amit.kucheria@linaro.org \
--cc=andy.shevchenko@gmail.com \
--cc=bdong@ucrobotics.com \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=hzhang@ucrobotics.com \
--cc=jeff.chen@actions-semi.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liuwei@actions-semi.com \
--cc=manivannanece23@gmail.com \
--cc=mp-cs@actions-semi.com \
--cc=robh+dt@kernel.org \
--cc=thomas.liau@actions-semi.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).