From: Corentin Labbe <clabbe@baylibre.com>
To: hdegoede@redhat.com, linux@armlinux.org.uk, mark.rutland@arm.com,
maxime.ripard@free-electrons.com, robh+dt@kernel.org,
tj@kernel.org, wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com, thierry.reding@gmail.com,
icenowy@aosc.io, Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v3 1/9] ata: ahci_platform: add support for AHCI controller regulator
Date: Fri, 13 Jul 2018 11:02:58 +0000 [thread overview]
Message-ID: <1531479786-4911-2-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1531479786-4911-1-git-send-email-clabbe@baylibre.com>
The SoC R40 AHCI controller need a regulator to work.
So this patch add a way to add an optional regulator on AHCI controller.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
drivers/ata/ahci.h | 1 +
drivers/ata/libahci_platform.c | 27 +++++++++++++++++++++++++--
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 1609ebab4e23..633d3ec5c1df 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -351,6 +351,7 @@ struct ahci_host_priv {
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator **target_pwrs; /* Optional */
+ struct regulator *ahci_regulator;/* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
* the PHY position in this array.
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index fe8939e161ea..d997a30ce793 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -138,7 +138,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
* ahci_platform_enable_regulators - Enable regulators
* @hpriv: host private area to store config values
*
- * This function enables all the regulators found in
+ * This function enables all the regulators found in controller and
* hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
* disables all the regulators already enabled in reverse order and
* returns an error.
@@ -150,6 +150,12 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
{
int rc, i;
+ if (hpriv->ahci_regulator) {
+ rc = regulator_enable(hpriv->ahci_regulator);
+ if (rc)
+ return rc;
+ }
+
for (i = 0; i < hpriv->nports; i++) {
if (!hpriv->target_pwrs[i])
continue;
@@ -166,6 +172,8 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
if (hpriv->target_pwrs[i])
regulator_disable(hpriv->target_pwrs[i]);
+ if (hpriv->ahci_regulator)
+ regulator_disable(hpriv->ahci_regulator);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
@@ -174,7 +182,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
* ahci_platform_disable_regulators - Disable regulators
* @hpriv: host private area to store config values
*
- * This function disables all regulators found in hpriv->target_pwrs.
+ * This function disables all regulators found in hpriv->target_pwrs and
+ * AHCI controller.
*/
void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
{
@@ -185,6 +194,9 @@ void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
continue;
regulator_disable(hpriv->target_pwrs[i]);
}
+
+ if (hpriv->ahci_regulator)
+ regulator_disable(hpriv->ahci_regulator);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
/**
@@ -336,6 +348,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
*
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
+ * regulator for controlling the AHCI controller (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
* 4) phys (optional)
@@ -391,6 +404,16 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
+ hpriv->ahci_regulator = devm_regulator_get_optional(dev, "ahci");
+
+ if (IS_ERR(hpriv->ahci_regulator)) {
+ rc = PTR_ERR(hpriv->ahci_regulator);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ rc = 0;
+ hpriv->ahci_regulator = NULL;
+ }
+
hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*
--
2.16.4
next prev parent reply other threads:[~2018-07-13 11:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 11:02 [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI Corentin Labbe
2018-07-13 11:02 ` Corentin Labbe [this message]
2018-07-13 11:02 ` [PATCH v3 2/9] dt-bindings: ata: ahci-platform: document ahci-supply Corentin Labbe
2018-07-16 15:49 ` Rob Herring
2018-07-13 11:03 ` [PATCH v3 3/9] ata: ahci_platform: add support for AHCI controller reset Corentin Labbe
2018-07-13 11:03 ` [PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset Corentin Labbe
2018-07-13 12:44 ` Maxime Ripard
2018-07-16 15:54 ` Rob Herring
2018-07-17 11:16 ` LABBE Corentin
2018-07-13 11:03 ` [PATCH v3 5/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply Corentin Labbe
2018-07-16 15:55 ` Rob Herring
2018-07-13 11:03 ` [PATCH v3 6/9] ata: ahci_platform: add support for port regulator Corentin Labbe
2018-07-13 11:07 ` Icenowy Zheng
2018-07-13 11:03 ` [PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply Corentin Labbe
2018-07-16 15:59 ` Rob Herring
2018-07-16 16:02 ` Icenowy Zheng
2018-07-13 11:03 ` [PATCH v3 8/9] ARM: dts: sun8i: r40: add sata node Corentin Labbe
2018-07-13 11:03 ` [PATCH v3 9/9] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI Corentin Labbe
2018-07-19 0:16 ` [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI Simon Baatz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531479786-4911-2-git-send-email-clabbe@baylibre.com \
--to=clabbe@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=hdegoede@redhat.com \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tj@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).