[PATCH v2 0/1] asus-wmi: Add support for custom fan curves

[PATCH v2 0/1] asus-wmi: Add support for custom fan curves

[Luke D. Jones]

Add support for custom fan curves found on some ASUS ROG laptops.

- V1
  + Initial patch work
- V2
  + Don't fail and remove wmi driver if error from
    asus_wmi_evaluate_method_buf() if error is -ENODEV

Luke D. Jones (1):
  asus-wmi: Add support for custom fan curves

 drivers/platform/x86/asus-wmi.c            | 498 +++++++++++++++++++++
 include/linux/platform_data/x86/asus-wmi.h |   2 +
 2 files changed, 500 insertions(+)

-- 
2.31.1

[PATCH v2 1/1] asus-wmi: Add support for custom fan curves

[Luke D. Jones]

Add support for custom fan curves found on some ASUS ROG laptops.

These laptops have the ability to set a custom curve for the CPU
and GPU fans via an ACPI method call. This patch enables this,
additionally enabling custom fan curves per-profile, where profile
here means each of the 3 levels of "throttle_thermal_policy".

Signed-off-by: Luke D. Jones <luke@ljones.dev>
---
 drivers/platform/x86/asus-wmi.c            | 498 +++++++++++++++++++++
 include/linux/platform_data/x86/asus-wmi.h |   2 +
 2 files changed, 500 insertions(+)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index cc5811844012..dd107301cc1e 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -122,6 +122,7 @@ struct bios_args {
 	u32 arg0;
 	u32 arg1;
 	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
+	u32 arg3;
 	u32 arg4;
 	u32 arg5;
 } __packed;
@@ -173,6 +174,12 @@ enum fan_type {
 	FAN_TYPE_SPEC83,	/* starting in Spec 8.3, use CPU_FAN_CTRL */
 };
 
+struct fan_curve {
+	char *balanced;
+	char *performance;
+	char *quiet;
+};
+
 struct asus_wmi {
 	int dsts_id;
 	int spec;
@@ -220,6 +227,12 @@ struct asus_wmi {
 	bool throttle_thermal_policy_available;
 	u8 throttle_thermal_policy_mode;
 
+	bool cpu_fan_curve_available;
+	struct fan_curve cpu_fan_curve;
+
+    bool gpu_fan_curve_available;
+	struct fan_curve gpu_fan_curve;
+
 	struct platform_profile_handler platform_profile_handler;
 	bool platform_profile_support;
 
@@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
 }
 EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
 
+static int asus_wmi_evaluate_method5(u32 method_id,
+		u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
+{
+	struct bios_args args = {
+		.arg0 = arg0,
+		.arg1 = arg1,
+		.arg2 = arg2,
+		.arg3 = arg3,
+		.arg4 = arg4,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	acpi_status status;
+	union acpi_object *obj;
+	u32 tmp = 0;
+
+	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+				     &input, &output);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	obj = (union acpi_object *)output.pointer;
+	if (obj && obj->type == ACPI_TYPE_INTEGER)
+		tmp = (u32) obj->integer.value;
+
+	if (retval)
+		*retval = tmp;
+
+	kfree(obj);
+
+	if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Returns as an error if the method output is not a buffer. Typically this
+ * means that the method called is unsupported.
+*/
+static int asus_wmi_evaluate_method_buf(u32 method_id,
+		u32 arg0, u32 arg1, u8 **ret_buffer)
+{
+	struct bios_args args = {
+		.arg0 = arg0,
+		.arg1 = arg1,
+		.arg2 = 0,
+	};
+	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	acpi_status status;
+	union acpi_object *obj;
+	u8 *buf_tmp;
+	u32 int_tmp = 0;
+
+	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
+				     &input, &output);
+
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	obj = (union acpi_object *)output.pointer;
+
+	if (obj && obj->type == ACPI_TYPE_INTEGER) {
+		int_tmp = (u32) obj->integer.value;
+		if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
+			return -ENODEV;
+
+		return int_tmp;
+	}
+
+	if (obj && obj->type == ACPI_TYPE_BUFFER) {
+		buf_tmp = obj->buffer.pointer;
+	}
+
+	if (ret_buffer)
+		ret_buffer = &buf_tmp;
+
+	kfree(obj);
+
+	return 0;
+}
+
 static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
 {
 	struct acpi_buffer input;
@@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct device *dev,
 // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
 static DEVICE_ATTR_RW(fan_boost_mode);
 
+/* Custom fan curves per-profile **********************************************/
+
+static int custom_fan_check_present(struct asus_wmi *asus,
+									bool *available, u32 dev)
+{
+	u8 *buffer;
+	int err;
+
+	*available = false;
+
+	/*
+	 * We don't do anything with the buffer from this call except ensure that
+	 * it is a buffer. A fail or unsupported returns an int (from ACPI)
+	*/
+	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
+	if (err) {
+		if (err == -ENODEV)
+			return 0;
+		return err;
+	}
+
+	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
+	if (err) {
+		if (err == -ENODEV)
+			return 0;
+		return err;
+	}
+
+	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
+	if (err) {
+		if (err == -ENODEV)
+			return 0;
+		return err;
+	}
+
+	*available = true;
+	return 0;
+}
+
+/*
+ * The expected input is of the format
+ *     "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
+ * where a pair is 30:1, with 30 = temperature, and 1 = percentage
+*/
+static int fan_curve_check_valid(const char *curve)
+{
+    char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
+	int err, ret;
+
+	char *set_delimiter = ",";
+	char *pair_delimiter = ":";
+    bool pair_start = true;
+	u32 prev_percent = 0;
+	u32 prev_temp = 0;
+    u32 percent = 0;
+	u32 temp = 0;
+
+    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
+
+	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
+		pair_tmp = kstrdup(set, GFP_KERNEL);
+        pair_start = true;
+		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
+			err = kstrtouint(pair, 10, &ret);
+            if (err) {
+                kfree(pair_tmp);
+                kfree(buf);
+                return err;
+            }
+
+            if (pair_start) {
+                temp = ret;
+                pair_start = false;
+            } else {
+                percent = ret;
+            }
+		}
+		kfree(pair_tmp);
+
+        if (temp < prev_temp || percent < prev_percent || percent > 100) {
+            pr_info("Fan curve invalid");
+			pr_info("A value is sequentially lower or percentage is > 100");
+            kfree(buf);
+            return -EINVAL;
+        }
+
+        prev_temp = temp;
+        prev_percent = percent;
+	}
+	kfree(buf);
+
+    return 0;
+}
+
+static int fan_curve_write(struct asus_wmi *asus, u32 dev, char *curve)
+{
+    char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
+    int err, ret;
+
+	char *set_delimiter = ",";
+	char *pair_delimiter = ":";
+	bool half_complete = false;
+	bool pair_start = true;
+	u32 percent = 0;
+	u32 shift = 0;
+	u32 temp = 0;
+    u32 arg1 = 0;
+    u32 arg2 = 0;
+    u32 arg3 = 0;
+    u32 arg4 = 0;
+
+    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
+
+	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
+		pair_tmp = kstrdup(set, GFP_KERNEL);
+        pair_start = true;
+		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
+			err = kstrtouint(pair, 10, &ret);
+            if (err) {
+                kfree(pair_tmp);
+                kfree(buf);
+                return err;
+            }
+
+            if (pair_start) {
+                temp = ret;
+                pair_start = false;
+            } else {
+                percent = ret;
+            }
+		}
+		kfree(pair_tmp);
+
+        if (!half_complete) {
+            arg1 += temp << shift;
+            arg3 += percent << shift;
+        } else {
+            arg2 += temp << shift;
+            arg4 += percent << shift;
+        }
+        shift += 8;
+
+        if (shift == 32) {
+            shift = 0;
+            half_complete = true;
+        }
+	}
+	kfree(buf);
+
+    return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
+									 arg1, arg2, arg3, arg4, &ret);
+}
+
+static ssize_t fan_curve_store(struct asus_wmi *asus, const char *buf,
+								size_t count, u32 dev, char **curve,
+								u32 throttle_policy)
+{
+    int err;
+
+	/* Allow a user to write "" or " " to erase a curve setting */
+	if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
+		kfree(*curve);
+		*curve = NULL;
+		return count;
+	}
+
+    err = fan_curve_check_valid(buf);
+    if (err)
+        return err;
+
+	/* Always save fan curve if it is valid */
+    *curve = kstrdup(buf, GFP_KERNEL);
+
+	/* Maybe activate fan curve if in associated mode */
+    if (asus->throttle_thermal_policy_mode == throttle_policy) {
+        err = fan_curve_write(asus, dev, *curve);
+        if (err)
+            return err;
+    }
+
+    return count;
+}
+
+/*
+ * CPU Fan Curves
+*/
+
+static ssize_t cpu_fan_curve_balanced_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.balanced);
+}
+
+static ssize_t cpu_fan_curve_balanced_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+							&asus->cpu_fan_curve.balanced,
+                            ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_balanced);
+
+static ssize_t cpu_fan_curve_performance_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.performance);
+}
+
+static ssize_t cpu_fan_curve_performance_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+							&asus->cpu_fan_curve.performance,
+                            ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_performance);
+
+static ssize_t cpu_fan_curve_quiet_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->cpu_fan_curve.quiet);
+}
+
+static ssize_t cpu_fan_curve_quiet_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_CPU_FAN_CURVE,
+							&asus->cpu_fan_curve.quiet,
+                            ASUS_THROTTLE_THERMAL_POLICY_SILENT);
+}
+
+static DEVICE_ATTR_RW(cpu_fan_curve_quiet);
+
+/*
+ * GPU Fan Curves
+*/
+
+static ssize_t gpu_fan_curve_balanced_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.balanced);
+}
+
+static ssize_t gpu_fan_curve_balanced_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+							&asus->gpu_fan_curve.balanced,
+                            ASUS_THROTTLE_THERMAL_POLICY_DEFAULT);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_balanced);
+
+static ssize_t gpu_fan_curve_performance_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.performance);
+}
+
+static ssize_t gpu_fan_curve_performance_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+							&asus->gpu_fan_curve.performance,
+                            ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_performance);
+
+static ssize_t gpu_fan_curve_quiet_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct asus_wmi *asus = dev_get_drvdata(dev);
+	return scnprintf(buf, PAGE_SIZE, "%s\n", asus->gpu_fan_curve.quiet);
+}
+
+static ssize_t gpu_fan_curve_quiet_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+    struct asus_wmi *asus = dev_get_drvdata(dev);
+    return fan_curve_store(asus, buf, count, ASUS_WMI_DEVID_GPU_FAN_CURVE,
+							&asus->gpu_fan_curve.quiet,
+                            ASUS_THROTTLE_THERMAL_POLICY_SILENT);
+}
+
+static DEVICE_ATTR_RW(gpu_fan_curve_quiet);
+
 /* Throttle thermal policy ****************************************************/
 
 static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
@@ -2067,6 +2469,53 @@ static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
 	return 0;
 }
 
+static int throttle_thermal_policy_write_cpu_curves(struct asus_wmi *asus)
+{
+	char *curve = NULL;
+	int err, mode;
+
+	mode = asus->throttle_thermal_policy_mode;
+
+	if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT) {
+		curve = asus->cpu_fan_curve.balanced;
+	} else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST) {
+		curve = asus->cpu_fan_curve.performance;
+	} else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT) {
+		curve = asus->cpu_fan_curve.quiet;
+	}
+
+	if (curve != NULL) {
+		err = fan_curve_write(asus, ASUS_WMI_DEVID_CPU_FAN_CURVE, curve);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+
+static int throttle_thermal_policy_write_gpu_curves(struct asus_wmi *asus)
+{
+	char *curve = NULL;
+	int err, mode;
+
+	mode = asus->throttle_thermal_policy_mode;
+
+	if (mode == ASUS_THROTTLE_THERMAL_POLICY_DEFAULT) {
+		curve = asus->gpu_fan_curve.balanced;
+	} else if (mode == ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST) {
+		curve = asus->gpu_fan_curve.performance;
+	} else if (mode == ASUS_THROTTLE_THERMAL_POLICY_SILENT) {
+		curve = asus->gpu_fan_curve.quiet;
+	}
+
+	if (curve != NULL) {
+		err = fan_curve_write(asus, ASUS_WMI_DEVID_GPU_FAN_CURVE, curve);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
 static int throttle_thermal_policy_write(struct asus_wmi *asus)
 {
 	int err;
@@ -2092,6 +2541,26 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
 		return -EIO;
 	}
 
+	if (asus->cpu_fan_curve_available) {
+		err = throttle_thermal_policy_write_cpu_curves(asus);
+		if (err) {
+			dev_warn(&asus->platform_device->dev,
+				"Failed to set custom CPU curve for thermal policy: %d\n",
+				err);
+			return err;
+		}
+	}
+
+	if (asus->gpu_fan_curve_available) {
+		err = throttle_thermal_policy_write_gpu_curves(asus);
+		if (err) {
+			dev_warn(&asus->platform_device->dev,
+				"Failed to set custom GPU curve for thermal policy: %d\n",
+				err);
+			return err;
+		}
+	}
+
 	return 0;
 }
 
@@ -2711,6 +3180,12 @@ static struct attribute *platform_attributes[] = {
 	&dev_attr_als_enable.attr,
 	&dev_attr_fan_boost_mode.attr,
 	&dev_attr_throttle_thermal_policy.attr,
+	&dev_attr_cpu_fan_curve_balanced.attr,
+	&dev_attr_cpu_fan_curve_performance.attr,
+	&dev_attr_cpu_fan_curve_quiet.attr,
+    &dev_attr_gpu_fan_curve_balanced.attr,
+	&dev_attr_gpu_fan_curve_performance.attr,
+	&dev_attr_gpu_fan_curve_quiet.attr,
 	&dev_attr_panel_od.attr,
 	NULL
 };
@@ -2741,6 +3216,18 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
 		ok = asus->fan_boost_mode_available;
 	else if (attr == &dev_attr_throttle_thermal_policy.attr)
 		ok = asus->throttle_thermal_policy_available;
+	else if (attr == &dev_attr_cpu_fan_curve_balanced.attr)
+		ok = asus->cpu_fan_curve_available;
+	else if (attr == &dev_attr_cpu_fan_curve_performance.attr)
+		ok = asus->cpu_fan_curve_available;
+	else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
+		ok = asus->cpu_fan_curve_available;
+    else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
+		ok = asus->gpu_fan_curve_available;
+	else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
+		ok = asus->gpu_fan_curve_available;
+	else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
+		ok = asus->gpu_fan_curve_available;
 	else if (attr == &dev_attr_panel_od.attr)
 		ok = asus->panel_overdrive_available;
 
@@ -3016,6 +3503,16 @@ static int asus_wmi_add(struct platform_device *pdev)
 	else
 		throttle_thermal_policy_set_default(asus);
 
+	err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
+			ASUS_WMI_DEVID_CPU_FAN_CURVE);
+	if (err)
+		goto fail_throttle_fan_curve;
+
+    err = custom_fan_check_present(asus, &asus->gpu_fan_curve_available,
+			ASUS_WMI_DEVID_GPU_FAN_CURVE);
+	if (err)
+		goto fail_throttle_fan_curve;
+
 	err = platform_profile_setup(asus);
 	if (err)
 		goto fail_platform_profile_setup;
@@ -3109,6 +3606,7 @@ static int asus_wmi_add(struct platform_device *pdev)
 	asus_wmi_sysfs_exit(asus->platform_device);
 fail_sysfs:
 fail_throttle_thermal_policy:
+fail_throttle_fan_curve:
 fail_platform_profile_setup:
 	if (asus->platform_profile_support)
 		platform_profile_remove();
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 17dc5cb6f3f2..a571b47ff362 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -77,6 +77,8 @@
 #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011
 #define ASUS_WMI_DEVID_FAN_CTRL		0x00110012 /* deprecated */
 #define ASUS_WMI_DEVID_CPU_FAN_CTRL	0x00110013
+#define ASUS_WMI_DEVID_CPU_FAN_CURVE	0x00110024
+#define ASUS_WMI_DEVID_GPU_FAN_CURVE	0x00110025
 
 /* Power */
 #define ASUS_WMI_DEVID_PROCESSOR_STATE	0x00120012
-- 
2.31.1

Re: [PATCH v2 1/1] asus-wmi: Add support for custom fan curves

[Luke Jones]

Hi all,

This is the largest patch I've written so far I think, and there may be 
mistakes. So far in testing it's been good though.
Feedback is absolutely welcomed. Some of my own comments are inline 
here, and this version is a WIP - I expect we'll have a round or two of 
changes.

Cheers

On Thu, Aug 19 2021 at 13:17:33 +1200, Luke D. Jones <luke@ljones.dev> 
wrote:
> Add support for custom fan curves found on some ASUS ROG laptops.
> 
> These laptops have the ability to set a custom curve for the CPU
> and GPU fans via an ACPI method call. This patch enables this,
> additionally enabling custom fan curves per-profile, where profile
> here means each of the 3 levels of "throttle_thermal_policy".
> 
> Signed-off-by: Luke D. Jones <luke@ljones.dev>
> ---
>  drivers/platform/x86/asus-wmi.c            | 498 
> +++++++++++++++++++++
>  include/linux/platform_data/x86/asus-wmi.h |   2 +
>  2 files changed, 500 insertions(+)
> 
> diff --git a/drivers/platform/x86/asus-wmi.c 
> b/drivers/platform/x86/asus-wmi.c
> index cc5811844012..dd107301cc1e 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -122,6 +122,7 @@ struct bios_args {
>  	u32 arg0;
>  	u32 arg1;
>  	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. 
> */
> +	u32 arg3;
>  	u32 arg4;
>  	u32 arg5;
>  } __packed;
> @@ -173,6 +174,12 @@ enum fan_type {
>  	FAN_TYPE_SPEC83,	/* starting in Spec 8.3, use CPU_FAN_CTRL */
>  };
> 
> +struct fan_curve {
> +	char *balanced;
> +	char *performance;
> +	char *quiet;
> +};
> +
>  struct asus_wmi {
>  	int dsts_id;
>  	int spec;
> @@ -220,6 +227,12 @@ struct asus_wmi {
>  	bool throttle_thermal_policy_available;
>  	u8 throttle_thermal_policy_mode;
> 
> +	bool cpu_fan_curve_available;
> +	struct fan_curve cpu_fan_curve;
> +
> +    bool gpu_fan_curve_available;
> +	struct fan_curve gpu_fan_curve;
> +
>  	struct platform_profile_handler platform_profile_handler;
>  	bool platform_profile_support;
> 
> @@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32 
> arg0, u32 arg1, u32 *retval)
>  }
>  EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
> 
> +static int asus_wmi_evaluate_method5(u32 method_id,
> +		u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> +{
> +	struct bios_args args = {
> +		.arg0 = arg0,
> +		.arg1 = arg1,
> +		.arg2 = arg2,
> +		.arg3 = arg3,
> +		.arg4 = arg4,
> +	};
> +	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +	acpi_status status;
> +	union acpi_object *obj;
> +	u32 tmp = 0;
> +
> +	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> +				     &input, &output);
> +
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = (union acpi_object *)output.pointer;
> +	if (obj && obj->type == ACPI_TYPE_INTEGER)
> +		tmp = (u32) obj->integer.value;
> +
> +	if (retval)
> +		*retval = tmp;
> +
> +	kfree(obj);
> +
> +	if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +/*
> + * Returns as an error if the method output is not a buffer. 
> Typically this
> + * means that the method called is unsupported.
> +*/
> +static int asus_wmi_evaluate_method_buf(u32 method_id,
> +		u32 arg0, u32 arg1, u8 **ret_buffer)
> +{
> +	struct bios_args args = {
> +		.arg0 = arg0,
> +		.arg1 = arg1,
> +		.arg2 = 0,
> +	};
> +	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +	acpi_status status;
> +	union acpi_object *obj;
> +	u8 *buf_tmp;
> +	u32 int_tmp = 0;
> +
> +	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> +				     &input, &output);
> +
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = (union acpi_object *)output.pointer;
> +
> +	if (obj && obj->type == ACPI_TYPE_INTEGER) {
> +		int_tmp = (u32) obj->integer.value;
> +		if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> +			return -ENODEV;
> +
> +		return int_tmp;
> +	}
> +
> +	if (obj && obj->type == ACPI_TYPE_BUFFER) {
> +		buf_tmp = obj->buffer.pointer;
> +	}
> +
> +	if (ret_buffer)
> +		ret_buffer = &buf_tmp;
> +
> +	kfree(obj);
> +
> +	return 0;
> +}
> +
>  static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer 
> args)
>  {
>  	struct acpi_buffer input;
> @@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct 
> device *dev,
>  // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
>  static DEVICE_ATTR_RW(fan_boost_mode);
> 
> +/* Custom fan curves per-profile 
> **********************************************/
> +
> +static int custom_fan_check_present(struct asus_wmi *asus,
> +									bool *available, u32 dev)
> +{
> +	u8 *buffer;
> +	int err;
> +
> +	*available = false;
> +
> +	/*
> +	 * We don't do anything with the buffer from this call except 
> ensure that
> +	 * it is a buffer. A fail or unsupported returns an int (from ACPI)
> +	*/

Discovering the buffer content is underway. It looks as if the format 
is the same as what we write to the ACPI method (should have been 
obvious :| )

> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	*available = true;
> +	return 0;
> +}
> +
> +/*
> + * The expected input is of the format
> + *     "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
> +*/
> +static int fan_curve_check_valid(const char *curve)
> +{
> +    char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
> +	int err, ret;
> +
> +	char *set_delimiter = ",";
> +	char *pair_delimiter = ":";
> +    bool pair_start = true;
> +	u32 prev_percent = 0;
> +	u32 prev_temp = 0;
> +    u32 percent = 0;
> +	u32 temp = 0;
> +
> +    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> +	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> +		pair_tmp = kstrdup(set, GFP_KERNEL);
> +        pair_start = true;
> +		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> +			err = kstrtouint(pair, 10, &ret);
> +            if (err) {
> +                kfree(pair_tmp);
> +                kfree(buf);
> +                return err;
> +            }
> +
> +            if (pair_start) {
> +                temp = ret;
> +                pair_start = false;
> +            } else {
> +                percent = ret;
> +            }
> +		}
> +		kfree(pair_tmp);
> +
> +        if (temp < prev_temp || percent < prev_percent || percent > 
> 100) {
> +            pr_info("Fan curve invalid");
> +			pr_info("A value is sequentially lower or percentage is > 100");
> +            kfree(buf);
> +            return -EINVAL;
> +        }
> +
> +        prev_temp = temp;
> +        prev_percent = percent;
> +	}
> +	kfree(buf);
> +
> +    return 0;
> +}
> +
> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char 
> *curve)
> +{
> +    char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
> +    int err, ret;
> +
> +	char *set_delimiter = ",";
> +	char *pair_delimiter = ":";
> +	bool half_complete = false;
> +	bool pair_start = true;
> +	u32 percent = 0;
> +	u32 shift = 0;
> +	u32 temp = 0;
> +    u32 arg1 = 0;
> +    u32 arg2 = 0;
> +    u32 arg3 = 0;
> +    u32 arg4 = 0;
> +
> +    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> +	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> +		pair_tmp = kstrdup(set, GFP_KERNEL);
> +        pair_start = true;
> +		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> +			err = kstrtouint(pair, 10, &ret);
> +            if (err) {
> +                kfree(pair_tmp);
> +                kfree(buf);
> +                return err;
> +            }
> +
> +            if (pair_start) {
> +                temp = ret;
> +                pair_start = false;
> +            } else {
> +                percent = ret;
> +            }
> +		}
> +		kfree(pair_tmp);
> +
> +        if (!half_complete) {
> +            arg1 += temp << shift;
> +            arg3 += percent << shift;
> +        } else {
> +            arg2 += temp << shift;
> +            arg4 += percent << shift;
> +        }
> +        shift += 8;
> +
> +        if (shift == 32) {
> +            shift = 0;
> +            half_complete = true;
> +        }
> +	}
> +	kfree(buf);
> +
> +    return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
> +									 arg1, arg2, arg3, arg4, &ret);
> +}
> +
> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char 
> *buf,
> +								size_t count, u32 dev, char **curve,
> +								u32 throttle_policy)
> +{
> +    int err;
> +
> +	/* Allow a user to write "" or " " to erase a curve setting */
> +	if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
> +		kfree(*curve);
> +		*curve = NULL;

I'll be adding a call to throttle_thermal_policy_write() here to ensure 
the EC resets the fan defaults for the current mode.

> >
> ---
>  drivers/platform/x86/asus-wmi.c            | 498 
> +++++++++++++++++++++
>  include/linux/platform_data/x86/asus-wmi.h |   2 +
>  2 files changed, 500 insertions(+)
> 
> diff --git a/drivers/platform/x86/asus-wmi.c 
> b/drivers/platform/x86/asus-wmi.c
> index cc5811844012..dd107301cc1e 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -122,6 +122,7 @@ struct bios_args {
>  	u32 arg0;
>  	u32 arg1;
>  	u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. 
> */
> +	u32 arg3;
>  	u32 arg4;
>  	u32 arg5;
>  } __packed;
> @@ -173,6 +174,12 @@ enum fan_type {
>  	FAN_TYPE_SPEC83,	/* starting in Spec 8.3, use CPU_FAN_CTRL */
>  };
> 
> +struct fan_curve {
> +	char *balanced;
> +	char *performance;
> +	char *quiet;
> +};
> +
>  struct asus_wmi {
>  	int dsts_id;
>  	int spec;
> @@ -220,6 +227,12 @@ struct asus_wmi {
>  	bool throttle_thermal_policy_available;
>  	u8 throttle_thermal_policy_mode;
> 
> +	bool cpu_fan_curve_available;
> +	struct fan_curve cpu_fan_curve;
> +
> +    bool gpu_fan_curve_available;
> +	struct fan_curve gpu_fan_curve;
> +
>  	struct platform_profile_handler platform_profile_handler;
>  	bool platform_profile_support;
> 
> @@ -285,6 +298,90 @@ int asus_wmi_evaluate_method(u32 method_id, u32 
> arg0, u32 arg1, u32 *retval)
>  }
>  EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
> 
> +static int asus_wmi_evaluate_method5(u32 method_id,
> +		u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> +{
> +	struct bios_args args = {
> +		.arg0 = arg0,
> +		.arg1 = arg1,
> +		.arg2 = arg2,
> +		.arg3 = arg3,
> +		.arg4 = arg4,
> +	};
> +	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +	acpi_status status;
> +	union acpi_object *obj;
> +	u32 tmp = 0;
> +
> +	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> +				     &input, &output);
> +
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = (union acpi_object *)output.pointer;
> +	if (obj && obj->type == ACPI_TYPE_INTEGER)
> +		tmp = (u32) obj->integer.value;
> +
> +	if (retval)
> +		*retval = tmp;
> +
> +	kfree(obj);
> +
> +	if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> +		return -ENODEV;
> +
> +	return 0;
> +}
> +
> +/*
> + * Returns as an error if the method output is not a buffer. 
> Typically this
> + * means that the method called is unsupported.
> +*/
> +static int asus_wmi_evaluate_method_buf(u32 method_id,
> +		u32 arg0, u32 arg1, u8 **ret_buffer)
> +{
> +	struct bios_args args = {
> +		.arg0 = arg0,
> +		.arg1 = arg1,
> +		.arg2 = 0,
> +	};
> +	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> +	acpi_status status;
> +	union acpi_object *obj;
> +	u8 *buf_tmp;
> +	u32 int_tmp = 0;
> +
> +	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> +				     &input, &output);
> +
> +	if (ACPI_FAILURE(status))
> +		return -EIO;
> +
> +	obj = (union acpi_object *)output.pointer;
> +
> +	if (obj && obj->type == ACPI_TYPE_INTEGER) {
> +		int_tmp = (u32) obj->integer.value;
> +		if (int_tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> +			return -ENODEV;
> +
> +		return int_tmp;
> +	}
> +
> +	if (obj && obj->type == ACPI_TYPE_BUFFER) {
> +		buf_tmp = obj->buffer.pointer;
> +	}
> +
> +	if (ret_buffer)
> +		ret_buffer = &buf_tmp;
> +
> +	kfree(obj);
> +
> +	return 0;
> +}
> +
>  static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer 
> args)
>  {
>  	struct acpi_buffer input;
> @@ -2043,6 +2140,311 @@ static ssize_t fan_boost_mode_store(struct 
> device *dev,
>  // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
>  static DEVICE_ATTR_RW(fan_boost_mode);
> 
> +/* Custom fan curves per-profile 
> **********************************************/
> +
> +static int custom_fan_check_present(struct asus_wmi *asus,
> +									bool *available, u32 dev)
> +{
> +	u8 *buffer;
> +	int err;
> +
> +	*available = false;
> +
> +	/*
> +	 * We don't do anything with the buffer from this call except 
> ensure that
> +	 * it is a buffer. A fail or unsupported returns an int (from ACPI)
> +	*/
> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 0, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 1, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	err = asus_wmi_evaluate_method_buf(asus->dsts_id, dev, 2, &buffer);
> +	if (err) {
> +		if (err == -ENODEV)
> +			return 0;
> +		return err;
> +	}
> +
> +	*available = true;
> +	return 0;
> +}
> +
> +/*
> + * The expected input is of the format
> + *     "30:1,49:2,59:3,69:4,79:31,89:49,99:56,109:58"
> + * where a pair is 30:1, with 30 = temperature, and 1 = percentage
> +*/
> +static int fan_curve_check_valid(const char *curve)
> +{
> +    char * buf, *set, *set_end, *pair_tmp, *pair, *pair_end;
> +	int err, ret;
> +
> +	char *set_delimiter = ",";
> +	char *pair_delimiter = ":";
> +    bool pair_start = true;
> +	u32 prev_percent = 0;
> +	u32 prev_temp = 0;
> +    u32 percent = 0;
> +	u32 temp = 0;
> +
> +    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> +	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> +		pair_tmp = kstrdup(set, GFP_KERNEL);
> +        pair_start = true;
> +		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> +			err = kstrtouint(pair, 10, &ret);
> +            if (err) {
> +                kfree(pair_tmp);
> +                kfree(buf);
> +                return err;
> +            }
> +
> +            if (pair_start) {
> +                temp = ret;
> +                pair_start = false;
> +            } else {
> +                percent = ret;
> +            }
> +		}
> +		kfree(pair_tmp);
> +
> +        if (temp < prev_temp || percent < prev_percent || percent > 
> 100) {
> +            pr_info("Fan curve invalid");
> +			pr_info("A value is sequentially lower or percentage is > 100");
> +            kfree(buf);
> +            return -EINVAL;
> +        }
> +
> +        prev_temp = temp;
> +        prev_percent = percent;
> +	}
> +	kfree(buf);
> +
> +    return 0;
> +}
> +
> +static int fan_curve_write(struct asus_wmi *asus, u32 dev, char 
> *curve)
> +{
> +    char * buf, *set, *pair_tmp, *pair, *set_end, *pair_end;
> +    int err, ret;
> +
> +	char *set_delimiter = ",";
> +	char *pair_delimiter = ":";
> +	bool half_complete = false;
> +	bool pair_start = true;
> +	u32 percent = 0;
> +	u32 shift = 0;
> +	u32 temp = 0;
> +    u32 arg1 = 0;
> +    u32 arg2 = 0;
> +    u32 arg3 = 0;
> +    u32 arg4 = 0;
> +
> +    buf = set_end = pair_end = kstrdup(curve, GFP_KERNEL);
> +
> +	while( (set = strsep(&set_end, set_delimiter)) != NULL ) {
> +		pair_tmp = kstrdup(set, GFP_KERNEL);
> +        pair_start = true;
> +		while( (pair = strsep(&pair_tmp, pair_delimiter)) != NULL ) {
> +			err = kstrtouint(pair, 10, &ret);
> +            if (err) {
> +                kfree(pair_tmp);
> +                kfree(buf);
> +                return err;
> +            }
> +
> +            if (pair_start) {
> +                temp = ret;
> +                pair_start = false;
> +            } else {
> +                percent = ret;
> +            }
> +		}
> +		kfree(pair_tmp);
> +
> +        if (!half_complete) {
> +            arg1 += temp << shift;
> +            arg3 += percent << shift;
> +        } else {
> +            arg2 += temp << shift;
> +            arg4 += percent << shift;
> +        }
> +        shift += 8;
> +
> +        if (shift == 32) {
> +            shift = 0;
> +            half_complete = true;
> +        }
> +	}
> +	kfree(buf);
> +
> +    return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, dev,
> +									 arg1, arg2, arg3, arg4, &ret);
> +}
> +
> +static ssize_t fan_curve_store(struct asus_wmi *asus, const char 
> *buf,
> +								size_t count, u32 dev, char **curve,
> +								u32 throttle_policy)
> +{
> +    int err;
> +
> +	/* Allow a user to write "" or " " to erase a curve setting */
> +	if (strlen(buf) <= 1 || strcmp(buf, " \n") == 0) {
> +		kfree(*curve);
> +		*curve = NULL;
> +		return count;
> +	}
>  if (attr == &dev_attr_cpu_fan_curve_performance.attr)
> +		ok = asus->cpu_fan_curve_available;
> +	else if (attr == &dev_attr_cpu_fan_curve_quiet.attr)
> +		ok = asus->cpu_fan_curve_available;
> +    else if (attr == &dev_attr_gpu_fan_curve_balanced.attr)
> +		ok = asus->gpu_fan_curve_available;
> +	else if (attr == &dev_attr_gpu_fan_curve_performance.attr)
> +		ok = asus->gpu_fan_curve_available;
> +	else if (attr == &dev_attr_gpu_fan_curve_quiet.attr)
> +		ok = asus->gpu_fan_curve_available;
>  	else if (attr == &dev_attr_panel_od.attr)
>  		ok = asus->panel_overdrive_available;
> 
> @@ -3016,6 +3503,16 @@ static int asus_wmi_add(struct platform_device 
> *pdev)
>  	else
>  		throttle_thermal_policy_set_default(asus);
> 
> +	err = custom_fan_check_present(asus, &asus->cpu_fan_curve_available,
> +			ASUS_WMI_DEVID_CPU_FAN_CURVE);
> +	if (err)
> +		goto fail_throttle_fan_curve;
> +
> +    err = custom_fan_check_present(asus, 
> &asus->gpu_fan_curve_available,
> +			ASUS_WMI_DEVID_GPU_FAN_CURVE);
> +	if (err)
> +		goto fail_throttle_fan_curve;
> +
>  	err = platform_profile_setup(asus);
>  	if (err)
>  		goto fail_platform_profile_setup;
> @@ -3109,6 +3606,7 @@ static int asus_wmi_add(struct platform_device 
> *pdev)
>  	asus_wmi_sysfs_exit(asus->platform_device);
>  fail_sysfs:
>  fail_throttle_thermal_policy:
> +fail_throttle_fan_curve:
>  fail_platform_profile_setup:
>  	if (asus->platform_profile_support)
>  		platform_profile_remove();
> diff --git a/include/linux/platform_data/x86/asus-wmi.h 
> b/include/linux/platform_data/x86/asus-wmi.h
> index 17dc5cb6f3f2..a571b47ff362 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -77,6 +77,8 @@
>  #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011
>  #define ASUS_WMI_DEVID_FAN_CTRL		0x00110012 /* deprecated */
>  #define ASUS_WMI_DEVID_CPU_FAN_CTRL	0x00110013
> +#define ASUS_WMI_DEVID_CPU_FAN_CURVE	0x00110024
> +#define ASUS_WMI_DEVID_GPU_FAN_CURVE	0x00110025
> 
>  /* Power */
>  #define ASUS_WMI_DEVID_PROCESSOR_STATE	0x00120012
> --
> 2.31.1
>