From: Henning Schild <henning.schild@siemens.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>, Pavel Machek <pavel@ucw.cz>,
Hans de Goede <hdegoede@redhat.com>,
Mark Gross <markgross@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Lee Jones <lee@kernel.org>, <linux-gpio@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>,
<platform-driver-x86@vger.kernel.org>
Cc: Sheng-Yuan Huang <syhuang3@nuvoton.com>,
Tasanakorn Phaipool <tasanakorn@gmail.com>,
<simon.guinot@sequanux.org>,
Henning Schild <henning.schild@siemens.com>
Subject: [PATCH v3 3/4] leds: simatic-ipc-leds-gpio: add new model 227G
Date: Thu, 11 Aug 2022 17:39:07 +0200 [thread overview]
Message-ID: <20220811153908.31283-4-henning.schild@siemens.com> (raw)
In-Reply-To: <20220811153908.31283-1-henning.schild@siemens.com>
This adds support of the Siemens Simatic IPC227G. Its LEDs are connected
to GPIO pins provided by the gpio-f7188x module. We make sure that
gets loaded, if not enabled in the kernel config no LED support will be
available.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
drivers/leds/simple/simatic-ipc-leds-gpio.c | 42 ++++++++++++++++---
drivers/platform/x86/simatic-ipc.c | 4 +-
.../platform_data/x86/simatic-ipc-base.h | 1 +
include/linux/platform_data/x86/simatic-ipc.h | 1 +
4 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
index 4c9e663a90ba..0d73dcbeec2d 100644
--- a/drivers/leds/simple/simatic-ipc-leds-gpio.c
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -13,28 +13,45 @@
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/x86/simatic-ipc-base.h>
-static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
+struct gpiod_lookup_table *simatic_ipc_led_gpio_table;
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table_127e = {
.dev_id = "leds-gpio",
.table = {
- GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 52, NULL, 1, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 53, NULL, 2, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 57, NULL, 3, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 4, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
},
};
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table_227g = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 0, NULL, 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 1, NULL, 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 2, NULL, 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 3, NULL, 3, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 4, NULL, 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-2", 5, NULL, 5, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("gpio-f7188x-3", 6, NULL, 6, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("gpio-f7188x-3", 7, NULL, 7, GPIO_ACTIVE_HIGH),
+ }
+};
+
static const struct gpio_led simatic_ipc_gpio_leds[] = {
- { .name = "green:" LED_FUNCTION_STATUS "-3" },
{ .name = "red:" LED_FUNCTION_STATUS "-1" },
{ .name = "green:" LED_FUNCTION_STATUS "-1" },
{ .name = "red:" LED_FUNCTION_STATUS "-2" },
{ .name = "green:" LED_FUNCTION_STATUS "-2" },
{ .name = "red:" LED_FUNCTION_STATUS "-3" },
+ { .name = "green:" LED_FUNCTION_STATUS "-3" },
};
static const struct gpio_led_platform_data simatic_ipc_gpio_leds_pdata = {
@@ -46,7 +63,7 @@ static struct platform_device *simatic_leds_pdev;
static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
{
- gpiod_remove_lookup_table(&simatic_ipc_led_gpio_table);
+ gpiod_remove_lookup_table(simatic_ipc_led_gpio_table);
platform_device_unregister(simatic_leds_pdev);
return 0;
@@ -54,10 +71,25 @@ static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
{
+ const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
struct gpio_desc *gpiod;
int err;
- gpiod_add_lookup_table(&simatic_ipc_led_gpio_table);
+ switch (plat->devmode) {
+ case SIMATIC_IPC_DEVICE_127E:
+ simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_127e;
+ break;
+ case SIMATIC_IPC_DEVICE_227G:
+ if (!IS_ENABLED(CONFIG_GPIO_F7188X))
+ return -ENODEV;
+ request_module("gpio-f7188x");
+ simatic_ipc_led_gpio_table = &simatic_ipc_led_gpio_table_227g;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ gpiod_add_lookup_table(simatic_ipc_led_gpio_table);
simatic_leds_pdev = platform_device_register_resndata(NULL,
"leds-gpio", PLATFORM_DEVID_NONE, NULL, 0,
&simatic_ipc_gpio_leds_pdata,
diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index ca3647b751d5..1825ef21a86d 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -41,6 +41,7 @@ static struct {
{SIMATIC_IPC_IPC127E, SIMATIC_IPC_DEVICE_127E, SIMATIC_IPC_DEVICE_NONE},
{SIMATIC_IPC_IPC227D, SIMATIC_IPC_DEVICE_227D, SIMATIC_IPC_DEVICE_NONE},
{SIMATIC_IPC_IPC227E, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_227E},
+ {SIMATIC_IPC_IPC227G, SIMATIC_IPC_DEVICE_227G, SIMATIC_IPC_DEVICE_NONE},
{SIMATIC_IPC_IPC277E, SIMATIC_IPC_DEVICE_NONE, SIMATIC_IPC_DEVICE_227E},
{SIMATIC_IPC_IPC427D, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_NONE},
{SIMATIC_IPC_IPC427E, SIMATIC_IPC_DEVICE_427E, SIMATIC_IPC_DEVICE_427E},
@@ -65,7 +66,8 @@ static int register_platform_devices(u32 station_id)
}
if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
- if (ledmode == SIMATIC_IPC_DEVICE_127E)
+ if (ledmode == SIMATIC_IPC_DEVICE_127E ||
+ ledmode == SIMATIC_IPC_DEVICE_227G)
pdevname = KBUILD_MODNAME "_leds_gpio";
platform_data.devmode = ledmode;
ipc_led_platform_device =
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
index 39fefd48cf4d..57d6a10dfc9e 100644
--- a/include/linux/platform_data/x86/simatic-ipc-base.h
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -19,6 +19,7 @@
#define SIMATIC_IPC_DEVICE_427E 2
#define SIMATIC_IPC_DEVICE_127E 3
#define SIMATIC_IPC_DEVICE_227E 4
+#define SIMATIC_IPC_DEVICE_227G 5
struct simatic_ipc_platform {
u8 devmode;
diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h
index f3b76b39776b..7a2e79f3be0b 100644
--- a/include/linux/platform_data/x86/simatic-ipc.h
+++ b/include/linux/platform_data/x86/simatic-ipc.h
@@ -31,6 +31,7 @@ enum simatic_ipc_station_ids {
SIMATIC_IPC_IPC427E = 0x00000A01,
SIMATIC_IPC_IPC477E = 0x00000A02,
SIMATIC_IPC_IPC127E = 0x00000D01,
+ SIMATIC_IPC_IPC227G = 0x00000F01,
};
static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len)
--
2.35.1
next prev parent reply other threads:[~2022-08-11 15:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-11 15:39 [PATCH v3 0/4] add support for another simatic board Henning Schild
2022-08-11 15:39 ` [PATCH v3 1/4] gpio-f7188x: Add GPIO support for Nuvoton NCT6116 Henning Schild
2022-08-12 8:43 ` simon.guinot
2022-08-12 10:23 ` Henning Schild
2022-08-12 11:22 ` simon.guinot
2022-08-23 9:26 ` Henning Schild
2022-08-22 16:01 ` Henning Schild
[not found] ` <CAHp75VdgKHh+ma34pY=PzS6MB6NWNtzBAADqQmaJgT+couN1Dg@mail.gmail.com>
2022-08-22 13:26 ` Henning Schild
2022-08-22 14:58 ` Henning Schild
2022-08-11 15:39 ` [PATCH v3 2/4] gpio-f7188x: use unique labels for banks/chips Henning Schild
[not found] ` <CAHp75VdWdzsT9wc9BNNKTJ3-eBn3uWdCFXqE2TT+CiJnoTOQYw@mail.gmail.com>
2022-08-22 13:21 ` Henning Schild
2022-08-22 21:36 ` Andy Shevchenko
2022-08-26 8:31 ` Linus Walleij
2022-08-11 15:39 ` Henning Schild [this message]
2022-08-11 18:53 ` [PATCH v3 3/4] leds: simatic-ipc-leds-gpio: add new model 227G Hans de Goede
2022-08-11 15:39 ` [PATCH v3 4/4] platform/x86: simatic-ipc: enable watchdog for 227G Henning Schild
2022-08-11 18:53 ` Hans de Goede
2022-08-11 18:34 ` [PATCH v3 0/4] add support for another simatic board Henning Schild
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220811153908.31283-4-henning.schild@siemens.com \
--to=henning.schild@siemens.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@bgdev.pl \
--cc=hdegoede@redhat.com \
--cc=lee@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=pavel@ucw.cz \
--cc=platform-driver-x86@vger.kernel.org \
--cc=simon.guinot@sequanux.org \
--cc=syhuang3@nuvoton.com \
--cc=tasanakorn@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).