* [PATCH v3 0/6] Pegasos2 emulation
@ 2021-02-22 15:22 BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II BALATON Zoltan
` (7 more replies)
0 siblings, 8 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
Hello,
This is adding a new PPC board called pegasos2. More info on it can be
found at:
https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
Currently it needs a firmware ROM image that I cannot include due to
original copyright holder (bPlan) did not release it under a free
licence but I have plans to write a replacement in the future. With
the original board firmware it can boot MorphOS now as:
qemu-system-ppc -M pegasos2 -cdrom morphos.iso -device ati-vga,romfile="" -serial stdio
then enter "boot cd boot.img" at the firmware "ok" prompt as described
in the MorphOS.readme. To boot Linux use same command line with e.g.
-cdrom debian-8.11.0-powerpc-netinst.iso then enter
"boot cd install/pegasos"
The last patch adds the actual board code after previous patches
adding VT8231 and MV64361 system controller chip emulation. The
mv643xx.h header file is taken from Linux and produces a bunch of
checkpatch warnings due to different formatting rules it follows, I'm
not sure we want to adopt it and change formatting or keep it as it is.
Regards,
BALATON Zoltan
BALATON Zoltan (6):
vt82c686: Implement control of serial port io ranges via config regs
vt82c686: QOM-ify superio related functionality
vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO
vt82c686: Add emulation of VT8231 south bridge
hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
hw/ppc: Add emulation of Genesi/bPlan Pegasos II
default-configs/devices/ppc-softmmu.mak | 2 +
hw/isa/vt82c686.c | 515 +++++++++++--
hw/pci-host/Kconfig | 3 +
hw/pci-host/meson.build | 2 +
hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++
hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++
hw/pci-host/trace-events | 6 +
hw/ppc/Kconfig | 10 +
hw/ppc/meson.build | 2 +
hw/ppc/pegasos2.c | 144 ++++
include/hw/isa/vt82c686.h | 2 +-
include/hw/pci-host/mv64361.h | 8 +
include/hw/pci/pci_ids.h | 4 +-
13 files changed, 2500 insertions(+), 83 deletions(-)
create mode 100644 hw/pci-host/mv64361.c
create mode 100644 hw/pci-host/mv643xx.h
create mode 100644 hw/ppc/pegasos2.c
create mode 100644 include/hw/pci-host/mv64361.h
--
2.21.3
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-23 4:34 ` David Gibson
2021-02-22 15:22 ` [PATCH v3 2/6] vt82c686: QOM-ify superio related functionality BALATON Zoltan
` (5 subsequent siblings)
7 siblings, 1 reply; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
In VIA super south bridge the io ranges of superio components
(parallel and serial ports and FDC) can be controlled by superio
config registers to set their base address and enable/disable them.
This is not easy to implement in QEMU because ISA emulation is only
designed to set io base address once on creating the device and io
ranges are registered at creation and cannot easily be disabled or
moved later.
In this patch we hack around that but only for serial ports because
those have a single io range at port base that's relatively easy to
handle and it's what guests actually use and set address different
than the default.
We do not attempt to handle controlling the parallel and FDC regions
because those have multiple io ranges so handling them would be messy
and guests either don't change their deafult or don't care. We could
even get away with disabling and not emulating them, but since they
are already there, this patch leaves them mapped at their default
address just in case this could be useful for a guest in the future.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/isa/vt82c686.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 82 insertions(+), 2 deletions(-)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 5db9b1706c..98bd57a074 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -252,8 +252,24 @@ static const TypeInfo vt8231_pm_info = {
typedef struct SuperIOConfig {
uint8_t regs[0x100];
MemoryRegion io;
+ ISASuperIODevice *superio;
+ MemoryRegion *serial_io[SUPERIO_MAX_SERIAL_PORTS];
} SuperIOConfig;
+static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
+ int offs)
+{
+ MemoryRegion *subregion, *mr = NULL;
+
+ QTAILQ_FOREACH(subregion, &parent->subregions, subregions_link) {
+ if (subregion->addr == offs) {
+ mr = subregion;
+ break;
+ }
+ }
+ return mr;
+}
+
static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
unsigned size)
{
@@ -279,7 +295,53 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
case 0xfd ... 0xff:
/* ignore write to read only registers */
return;
- /* case 0xe6 ... 0xe8: Should set base port of parallel and serial */
+ case 0xe2:
+ {
+ data &= 0x1f;
+ if (data & BIT(2)) { /* Serial port 1 enable */
+ ISADevice *dev = sc->superio->serial[0];
+ if (!memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_add_subregion(isa_address_space_io(dev),
+ dev->ioport_id, sc->serial_io[0]);
+ }
+ } else {
+ MemoryRegion *io = isa_address_space_io(sc->superio->serial[0]);
+ if (memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_del_subregion(io, sc->serial_io[0]);
+ }
+ }
+ if (data & BIT(3)) { /* Serial port 2 enable */
+ ISADevice *dev = sc->superio->serial[1];
+ if (!memory_region_is_mapped(sc->serial_io[1])) {
+ memory_region_add_subregion(isa_address_space_io(dev),
+ dev->ioport_id, sc->serial_io[1]);
+ }
+ } else {
+ MemoryRegion *io = isa_address_space_io(sc->superio->serial[1]);
+ if (memory_region_is_mapped(sc->serial_io[1])) {
+ memory_region_del_subregion(io, sc->serial_io[1]);
+ }
+ }
+ break;
+ }
+ case 0xe7: /* Serial port 1 io base address */
+ {
+ data &= 0xfe;
+ sc->superio->serial[0]->ioport_id = data << 2;
+ if (memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_set_address(sc->serial_io[0], data << 2);
+ }
+ break;
+ }
+ case 0xe8: /* Serial port 2 io base address */
+ {
+ data &= 0xfe;
+ sc->superio->serial[1]->ioport_id = data << 2;
+ if (memory_region_is_mapped(sc->serial_io[1])) {
+ memory_region_set_address(sc->serial_io[1], data << 2);
+ }
+ break;
+ }
default:
qemu_log_mask(LOG_UNIMP,
"via_superio_cfg: unimplemented register 0x%x\n", idx);
@@ -385,6 +447,7 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
DeviceState *dev = DEVICE(d);
ISABus *isa_bus;
qemu_irq *isa_irq;
+ ISASuperIOClass *ic;
int i;
qdev_init_gpio_out(dev, &s->cpu_intr, 1);
@@ -394,7 +457,9 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
i8254_pit_init(isa_bus, 0x40, 0, NULL);
i8257_dma_init(isa_bus, 0);
- isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
+ s->superio_cfg.superio = ISA_SUPERIO(isa_create_simple(isa_bus,
+ TYPE_VT82C686B_SUPERIO));
+ ic = ISA_SUPERIO_GET_CLASS(s->superio_cfg.superio);
mc146818_rtc_init(isa_bus, 2000, NULL);
for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
@@ -412,6 +477,21 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
*/
memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
&s->superio_cfg.io);
+
+ /* Grab io regions of serial devices so we can control them */
+ for (i = 0; i < ic->serial.count; i++) {
+ ISADevice *sd = s->superio_cfg.superio->serial[i];
+ MemoryRegion *io = isa_address_space_io(sd);
+ MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
+ if (!mr) {
+ error_setg(errp, "Could not get io region for serial %d", i);
+ return;
+ }
+ s->superio_cfg.serial_io[i] = mr;
+ if (memory_region_is_mapped(mr)) {
+ memory_region_del_subregion(io, mr);
+ }
+ }
}
static void via_class_init(ObjectClass *klass, void *data)
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v3 4/6] vt82c686: Add emulation of VT8231 south bridge
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
` (2 preceding siblings ...)
2021-02-22 15:22 ` [PATCH v3 2/6] vt82c686: QOM-ify superio related functionality BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 3/6] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO BALATON Zoltan
` (3 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
Add emulation of VT8231 south bridge ISA part based on the similar
VT82C686B but implemented in a separate subclass that holds the
differences while reusing parts that can be shared.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/isa/vt82c686.c | 154 ++++++++++++++++++++++++++++++--------
include/hw/isa/vt82c686.h | 1 +
include/hw/pci/pci_ids.h | 3 +-
3 files changed, 126 insertions(+), 32 deletions(-)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 89770936a2..37f697ad8d 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -8,6 +8,9 @@
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
+ *
+ * VT8231 south bridge support and general clean up to allow it
+ * Copyright (c) 2018-2020 BALATON Zoltan
*/
#include "qemu/osdep.h"
@@ -609,24 +612,48 @@ static const TypeInfo vt8231_superio_info = {
};
-OBJECT_DECLARE_SIMPLE_TYPE(VT82C686BISAState, VT82C686B_ISA)
+#define TYPE_VIA_ISA "via-isa"
+OBJECT_DECLARE_SIMPLE_TYPE(ViaISAState, VIA_ISA)
-struct VT82C686BISAState {
+struct ViaISAState {
PCIDevice dev;
qemu_irq cpu_intr;
ViaSuperIOState *via_sio;
};
+static const VMStateDescription vmstate_via = {
+ .name = "via-isa",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(dev, ViaISAState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const TypeInfo via_isa_info = {
+ .name = TYPE_VIA_ISA,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(ViaISAState),
+ .abstract = true,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ { },
+ },
+};
+
static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
{
- VT82C686BISAState *s = opaque;
+ ViaISAState *s = opaque;
qemu_set_irq(s->cpu_intr, level);
}
+/* TYPE_VT82C686B_ISA */
+
static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
uint32_t val, int len)
{
- VT82C686BISAState *s = VT82C686B_ISA(d);
+ ViaISAState *s = VIA_ISA(d);
trace_via_isa_write(addr, val, len);
pci_default_write_config(d, addr, val, len);
@@ -636,19 +663,9 @@ static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
}
}
-static const VMStateDescription vmstate_via = {
- .name = "vt82c686b",
- .version_id = 1,
- .minimum_version_id = 1,
- .fields = (VMStateField[]) {
- VMSTATE_PCI_DEVICE(dev, VT82C686BISAState),
- VMSTATE_END_OF_LIST()
- }
-};
-
static void vt82c686b_isa_reset(DeviceState *dev)
{
- VT82C686BISAState *s = VT82C686B_ISA(dev);
+ ViaISAState *s = VIA_ISA(dev);
uint8_t *pci_conf = s->dev.config;
pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
@@ -668,7 +685,7 @@ static void vt82c686b_isa_reset(DeviceState *dev)
static void vt82c686b_realize(PCIDevice *d, Error **errp)
{
- VT82C686BISAState *s = VT82C686B_ISA(d);
+ ViaISAState *s = VIA_ISA(d);
DeviceState *dev = DEVICE(d);
ISABus *isa_bus;
qemu_irq *isa_irq;
@@ -692,7 +709,7 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
}
}
-static void via_class_init(ObjectClass *klass, void *data)
+static void vt82c686b_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
@@ -700,28 +717,101 @@ static void via_class_init(ObjectClass *klass, void *data)
k->realize = vt82c686b_realize;
k->config_write = vt82c686b_write_config;
k->vendor_id = PCI_VENDOR_ID_VIA;
- k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
+ k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA;
k->class_id = PCI_CLASS_BRIDGE_ISA;
k->revision = 0x40;
dc->reset = vt82c686b_isa_reset;
dc->desc = "ISA bridge";
dc->vmsd = &vmstate_via;
- /*
- * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
- * e.g. by mips_fuloong2e_init()
- */
+ /* Reason: part of VIA VT82C686 southbridge, needs to be wired up */
dc->user_creatable = false;
}
-static const TypeInfo via_info = {
+static const TypeInfo vt82c686b_isa_info = {
.name = TYPE_VT82C686B_ISA,
- .parent = TYPE_PCI_DEVICE,
- .instance_size = sizeof(VT82C686BISAState),
- .class_init = via_class_init,
- .interfaces = (InterfaceInfo[]) {
- { INTERFACE_CONVENTIONAL_PCI_DEVICE },
- { },
- },
+ .parent = TYPE_VIA_ISA,
+ .instance_size = sizeof(ViaISAState),
+ .class_init = vt82c686b_class_init,
+};
+
+/* TYPE_VT8231_ISA */
+
+static void vt8231_write_config(PCIDevice *d, uint32_t addr,
+ uint32_t val, int len)
+{
+ ViaISAState *s = VIA_ISA(d);
+
+ trace_via_isa_write(addr, val, len);
+ pci_default_write_config(d, addr, val, len);
+ if (addr == 0x50) {
+ /* BIT(2): enable or disable superio config io ports */
+ via_superio_io_enable(s->via_sio, val & BIT(2));
+ }
+}
+
+static void vt8231_isa_reset(DeviceState *dev)
+{
+ ViaISAState *s = VIA_ISA(dev);
+ uint8_t *pci_conf = s->dev.config;
+
+ pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
+ pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
+ pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
+
+ pci_conf[0x58] = 0x40; /* Miscellaneous Control 0 */
+ pci_conf[0x67] = 0x08; /* Fast IR Config */
+ pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */
+}
+
+static void vt8231_realize(PCIDevice *d, Error **errp)
+{
+ ViaISAState *s = VIA_ISA(d);
+ DeviceState *dev = DEVICE(d);
+ ISABus *isa_bus;
+ qemu_irq *isa_irq;
+ int i;
+
+ qdev_init_gpio_out(dev, &s->cpu_intr, 1);
+ isa_irq = qemu_allocate_irqs(via_isa_request_i8259_irq, s, 1);
+ isa_bus = isa_bus_new(dev, get_system_memory(), pci_address_space_io(d),
+ &error_fatal);
+ isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
+ i8254_pit_init(isa_bus, 0x40, 0, NULL);
+ i8257_dma_init(isa_bus, 0);
+ s->via_sio = VIA_SUPERIO(isa_create_simple(isa_bus, TYPE_VT8231_SUPERIO));
+ mc146818_rtc_init(isa_bus, 2000, NULL);
+
+ for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
+ if (i < PCI_COMMAND || i >= PCI_REVISION_ID) {
+ d->wmask[i] = 0;
+ }
+ }
+}
+
+static void vt8231_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = vt8231_realize;
+ k->config_write = vt8231_write_config;
+ k->vendor_id = PCI_VENDOR_ID_VIA;
+ k->device_id = PCI_DEVICE_ID_VIA_8231_ISA;
+ k->class_id = PCI_CLASS_BRIDGE_ISA;
+ k->revision = 0x10;
+ dc->reset = vt8231_isa_reset;
+ dc->desc = "ISA bridge";
+ dc->vmsd = &vmstate_via;
+ /* Reason: part of VIA VT8231 southbridge, needs to be wired up */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo vt8231_isa_info = {
+ .name = TYPE_VT8231_ISA,
+ .parent = TYPE_VIA_ISA,
+ .instance_size = sizeof(ViaISAState),
+ .class_init = vt8231_class_init,
};
@@ -733,7 +823,9 @@ static void vt82c686b_register_types(void)
type_register_static(&via_superio_info);
type_register_static(&vt82c686b_superio_info);
type_register_static(&vt8231_superio_info);
- type_register_static(&via_info);
+ type_register_static(&via_isa_info);
+ type_register_static(&vt82c686b_isa_info);
+ type_register_static(&vt8231_isa_info);
}
type_init(vt82c686b_register_types)
diff --git a/include/hw/isa/vt82c686.h b/include/hw/isa/vt82c686.h
index 0692b9a527..0f01aaa471 100644
--- a/include/hw/isa/vt82c686.h
+++ b/include/hw/isa/vt82c686.h
@@ -3,6 +3,7 @@
#define TYPE_VT82C686B_ISA "vt82c686b-isa"
#define TYPE_VT82C686B_PM "vt82c686b-pm"
+#define TYPE_VT8231_ISA "vt8231-isa"
#define TYPE_VT8231_PM "vt8231-pm"
#define TYPE_VIA_AC97 "via-ac97"
#define TYPE_VIA_MC97 "via-mc97"
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index ea28dcc850..ac0c23ebc7 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -204,12 +204,13 @@
#define PCI_VENDOR_ID_XILINX 0x10ee
#define PCI_VENDOR_ID_VIA 0x1106
-#define PCI_DEVICE_ID_VIA_ISA_BRIDGE 0x0686
+#define PCI_DEVICE_ID_VIA_82C686B_ISA 0x0686
#define PCI_DEVICE_ID_VIA_IDE 0x0571
#define PCI_DEVICE_ID_VIA_UHCI 0x3038
#define PCI_DEVICE_ID_VIA_82C686B_PM 0x3057
#define PCI_DEVICE_ID_VIA_AC97 0x3058
#define PCI_DEVICE_ID_VIA_MC97 0x3068
+#define PCI_DEVICE_ID_VIA_8231_ISA 0x8231
#define PCI_DEVICE_ID_VIA_8231_PM 0x8235
#define PCI_VENDOR_ID_MARVELL 0x11ab
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v3 3/6] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
` (3 preceding siblings ...)
2021-02-22 15:22 ` [PATCH v3 4/6] vt82c686: Add emulation of VT8231 south bridge BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller BALATON Zoltan
` (2 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
The VT8231 south bridge is very similar to VT82C686B but there are
some differences in register addresses and functionality, e.g. the
VT8231 only has one serial port. This commit adds VT8231_SUPERIO
subclass based on the abstract VIA_SUPERIO class to emulate the
superio part of VT8231.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/isa/vt82c686.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 121 insertions(+)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index ab0fb5af44..89770936a2 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -489,6 +489,126 @@ static const TypeInfo vt82c686b_superio_info = {
};
+#define TYPE_VT8231_SUPERIO "vt8231-superio"
+
+static void vt8231_superio_cfg_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ ViaSuperIOState *sc = opaque;
+ uint8_t idx = sc->regs[0];
+
+ if (addr == 0) { /* config index register */
+ sc->regs[0] = data;
+ return;
+ }
+
+ /* config data register */
+ trace_via_superio_write(idx, data);
+ switch (idx) {
+ case 0x00 ... 0xdf:
+ case 0xe7 ... 0xef:
+ case 0xf0 ... 0xf1:
+ case 0xf5:
+ case 0xf8:
+ case 0xfd:
+ /* ignore write to read only registers */
+ return;
+ case 0xf2: /* Function select */
+ {
+ data &= 0x17;
+ if (data & BIT(2)) { /* Serial port enable */
+ ISADevice *dev = sc->superio.serial[0];
+ if (!memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_add_subregion(isa_address_space_io(dev),
+ dev->ioport_id, sc->serial_io[0]);
+ }
+ } else {
+ MemoryRegion *io = isa_address_space_io(sc->superio.serial[0]);
+ if (memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_del_subregion(io, sc->serial_io[0]);
+ }
+ }
+ break;
+ }
+ case 0xf4: /* Serial port io base address */
+ {
+ data &= 0xfe;
+ sc->superio.serial[0]->ioport_id = data << 2;
+ if (memory_region_is_mapped(sc->serial_io[0])) {
+ memory_region_set_address(sc->serial_io[0], data << 2);
+ }
+ break;
+ }
+ default:
+ qemu_log_mask(LOG_UNIMP,
+ "via_superio_cfg: unimplemented register 0x%x\n", idx);
+ break;
+ }
+ sc->regs[idx] = data;
+}
+
+static const MemoryRegionOps vt8231_superio_cfg_ops = {
+ .read = via_superio_cfg_read,
+ .write = vt8231_superio_cfg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl = {
+ .min_access_size = 1,
+ .max_access_size = 1,
+ },
+};
+
+static void vt8231_superio_reset(DeviceState *dev)
+{
+ ViaSuperIOState *s = VIA_SUPERIO(dev);
+
+ memset(s->regs, 0, sizeof(s->regs));
+ /* Device ID */
+ s->regs[0xf0] = 0x3c;
+ /* Device revision */
+ s->regs[0xf1] = 0x01;
+ /* Function select - all disabled */
+ vt8231_superio_cfg_write(s, 0, 0xf2, 1);
+ vt8231_superio_cfg_write(s, 1, 0x03, 1);
+ /* Serial port base addr */
+ vt8231_superio_cfg_write(s, 0, 0xf4, 1);
+ vt8231_superio_cfg_write(s, 1, 0xfe, 1);
+ /* Parallel port base addr */
+ vt8231_superio_cfg_write(s, 0, 0xf6, 1);
+ vt8231_superio_cfg_write(s, 1, 0xde, 1);
+ /* Floppy ctrl base addr */
+ vt8231_superio_cfg_write(s, 0, 0xf7, 1);
+ vt8231_superio_cfg_write(s, 1, 0xfc, 1);
+
+ vt8231_superio_cfg_write(s, 0, 0, 1);
+}
+
+static void vt8231_superio_init(Object *obj)
+{
+ VIA_SUPERIO(obj)->io_ops = &vt8231_superio_cfg_ops;
+}
+
+static void vt8231_superio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
+
+ dc->reset = vt8231_superio_reset;
+ sc->serial.count = 1;
+ sc->parallel.count = 1;
+ sc->ide.count = 0; /* emulated by via-ide */
+ sc->floppy.count = 1;
+}
+
+static const TypeInfo vt8231_superio_info = {
+ .name = TYPE_VT8231_SUPERIO,
+ .parent = TYPE_VIA_SUPERIO,
+ .instance_size = sizeof(ViaSuperIOState),
+ .instance_init = vt8231_superio_init,
+ .class_size = sizeof(ISASuperIOClass),
+ .class_init = vt8231_superio_class_init,
+};
+
+
OBJECT_DECLARE_SIMPLE_TYPE(VT82C686BISAState, VT82C686B_ISA)
struct VT82C686BISAState {
@@ -612,6 +732,7 @@ static void vt82c686b_register_types(void)
type_register_static(&vt8231_pm_info);
type_register_static(&via_superio_info);
type_register_static(&vt82c686b_superio_info);
+ type_register_static(&vt8231_superio_info);
type_register_static(&via_info);
}
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-23 4:38 ` David Gibson
2021-02-22 15:22 ` [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs BALATON Zoltan
` (6 subsequent siblings)
7 siblings, 1 reply; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II,
a PowerPC board based on the Marvell MV64361 system controller and the
VIA VT8231 integrated south bridge/superio chips. It can run Linux,
AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM
image is needed to boot and only MorphOS has a video driver to produce
graphics output. Linux could work too but distros that supported this
machine don't include usual video drivers so those only run with
serial console for now.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
default-configs/devices/ppc-softmmu.mak | 2 +
hw/ppc/Kconfig | 10 ++
hw/ppc/meson.build | 2 +
hw/ppc/pegasos2.c | 144 ++++++++++++++++++++++++
4 files changed, 158 insertions(+)
create mode 100644 hw/ppc/pegasos2.c
diff --git a/default-configs/devices/ppc-softmmu.mak b/default-configs/devices/ppc-softmmu.mak
index 61b78b844d..4535993d8d 100644
--- a/default-configs/devices/ppc-softmmu.mak
+++ b/default-configs/devices/ppc-softmmu.mak
@@ -14,5 +14,7 @@ CONFIG_SAM460EX=y
CONFIG_MAC_OLDWORLD=y
CONFIG_MAC_NEWWORLD=y
+CONFIG_PEGASOS2=y
+
# For PReP
CONFIG_PREP=y
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index d11dc30509..98d8dd1a84 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -68,6 +68,16 @@ config SAM460EX
select USB_OHCI
select FDT_PPC
+config PEGASOS2
+ bool
+ select MV64361
+ select VT82C686
+ select IDE_VIA
+ select SMBUS_EEPROM
+# These should come with VT82C686
+ select APM
+ select ACPI_X86
+
config PREP
bool
imply PCI_DEVICES
diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build
index 218631c883..86d6f379d1 100644
--- a/hw/ppc/meson.build
+++ b/hw/ppc/meson.build
@@ -78,5 +78,7 @@ ppc_ss.add(when: 'CONFIG_E500', if_true: files(
))
# PowerPC 440 Xilinx ML507 reference board.
ppc_ss.add(when: 'CONFIG_VIRTEX', if_true: files('virtex_ml507.c'))
+# Pegasos2
+ppc_ss.add(when: 'CONFIG_PEGASOS2', if_true: files('pegasos2.c'))
hw_arch += {'ppc': ppc_ss}
diff --git a/hw/ppc/pegasos2.c b/hw/ppc/pegasos2.c
new file mode 100644
index 0000000000..8b96961c90
--- /dev/null
+++ b/hw/ppc/pegasos2.c
@@ -0,0 +1,144 @@
+/*
+ * QEMU PowerPC CHRP (Genesi/bPlan Pegasos II) hardware System Emulator
+ *
+ * Copyright (c) 2018-2020 BALATON Zoltan
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "hw/ppc/ppc.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci_host.h"
+#include "hw/irq.h"
+#include "hw/pci-host/mv64361.h"
+#include "hw/isa/vt82c686.h"
+#include "hw/ide/pci.h"
+#include "hw/i2c/smbus_eeprom.h"
+#include "hw/qdev-properties.h"
+#include "sysemu/reset.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "hw/fw-path-provider.h"
+#include "elf.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "sysemu/kvm.h"
+#include "kvm_ppc.h"
+#include "exec/address-spaces.h"
+#include "trace.h"
+#include "qemu/datadir.h"
+#include "sysemu/device_tree.h"
+
+#define PROM_FILENAME "pegasos2.rom"
+#define PROM_ADDR 0xfff00000
+#define PROM_SIZE 0x80000
+
+#define BUS_FREQ 133333333
+
+static void pegasos2_reset(void *opaque)
+{
+ PowerPCCPU *cpu = opaque;
+
+ cpu_reset(CPU(cpu));
+ cpu->env.spr[SPR_HID1] = 7ULL << 28;
+}
+
+static void pegasos2_init(MachineState *machine)
+{
+ PowerPCCPU *cpu = NULL;
+ MemoryRegion *rom = g_new(MemoryRegion, 1);
+ DeviceState *mv;
+ PCIBus *pci_bus;
+ PCIDevice *dev;
+ I2CBus *i2c_bus;
+ const char *fwname = machine->firmware ?: PROM_FILENAME;
+ char *filename;
+ int sz;
+ uint8_t *spd_data;
+
+ /* init CPU */
+ cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
+ if (PPC_INPUT(&cpu->env) != PPC_FLAGS_INPUT_6xx) {
+ error_report("Incompatible CPU, only 6xx bus supported");
+ exit(1);
+ }
+
+ /* Set time-base frequency */
+ cpu_ppc_tb_init(&cpu->env, BUS_FREQ / 4);
+ qemu_register_reset(pegasos2_reset, cpu);
+
+ /* RAM */
+ memory_region_add_subregion(get_system_memory(), 0, machine->ram);
+
+ /* allocate and load firmware */
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, fwname);
+ if (!filename) {
+ error_report("Could not find firmware '%s'", fwname);
+ exit(1);
+ }
+ memory_region_init_rom(rom, NULL, "pegasos2.rom", PROM_SIZE, &error_fatal);
+ memory_region_add_subregion(get_system_memory(), PROM_ADDR, rom);
+ sz = load_elf(filename, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 1,
+ PPC_ELF_MACHINE, 0, 0);
+ if (sz <= 0) {
+ sz = load_image_targphys(filename, PROM_ADDR, PROM_SIZE);
+ }
+ if (sz <= 0 || sz > PROM_SIZE) {
+ error_report("Could not load firmware '%s'", filename);
+ exit(1);
+ }
+ g_free(filename);
+
+ /* Marvell Discovery II system controller */
+ mv = DEVICE(sysbus_create_simple(TYPE_MV64361, -1,
+ ((qemu_irq *)cpu->env.irq_inputs)[PPC6xx_INPUT_INT]));
+ pci_bus = mv64361_get_pci_bus(mv, 1);
+
+ /* VIA VT8231 South Bridge (multifunction PCI device) */
+ /* VT8231 function 0: PCI-to-ISA Bridge */
+ dev = pci_create_simple_multifunction(pci_bus, PCI_DEVFN(12, 0), true,
+ TYPE_VT8231_ISA);
+ qdev_connect_gpio_out(DEVICE(dev), 0,
+ qdev_get_gpio_in_named(mv, "gpp", 31));
+
+ /* VT8231 function 1: IDE Controller */
+ dev = pci_create_simple(pci_bus, PCI_DEVFN(12, 1), "via-ide");
+ pci_ide_create_devs(dev);
+
+ /* VT8231 function 2-3: USB Ports */
+ pci_create_simple(pci_bus, PCI_DEVFN(12, 2), "vt82c686b-usb-uhci");
+ pci_create_simple(pci_bus, PCI_DEVFN(12, 3), "vt82c686b-usb-uhci");
+
+ /* VT8231 function 4: Power Management Controller */
+ dev = pci_create_simple(pci_bus, PCI_DEVFN(12, 4), TYPE_VT8231_PM);
+ i2c_bus = I2C_BUS(qdev_get_child_bus(DEVICE(dev), "i2c"));
+ spd_data = spd_data_generate(DDR, machine->ram_size);
+ smbus_eeprom_init_one(i2c_bus, 0x57, spd_data);
+
+ /* VT8231 function 5-6: AC97 Audio & Modem */
+ pci_create_simple(pci_bus, PCI_DEVFN(12, 5), TYPE_VIA_AC97);
+ pci_create_simple(pci_bus, PCI_DEVFN(12, 6), TYPE_VIA_MC97);
+
+ /* other PC hardware */
+ pci_vga_init(pci_bus);
+}
+
+static void pegasos2_machine(MachineClass *mc)
+{
+ mc->desc = "Genesi/bPlan Pegasos II";
+ mc->init = pegasos2_init;
+ mc->block_default_type = IF_IDE;
+ mc->default_boot_order = "cd";
+ mc->default_display = "std";
+ mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("7400_v2.9");
+ mc->default_ram_id = "pegasos2.ram";
+ mc->default_ram_size = 512 * MiB;
+}
+
+DEFINE_MACHINE("pegasos2", pegasos2_machine)
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v3 2/6] vt82c686: QOM-ify superio related functionality
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 4/6] vt82c686: Add emulation of VT8231 south bridge BALATON Zoltan
` (4 subsequent siblings)
7 siblings, 0 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
Collect superio functionality and its controlling config registers
handling in an abstract VIA_SUPERIO class that is a subclass of
ISA_SUPERIO and put vt82c686b specific parts in a subclass of this
abstract class.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/isa/vt82c686.c | 240 ++++++++++++++++++++++++--------------
include/hw/isa/vt82c686.h | 1 -
2 files changed, 150 insertions(+), 91 deletions(-)
diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
index 98bd57a074..ab0fb5af44 100644
--- a/hw/isa/vt82c686.c
+++ b/hw/isa/vt82c686.c
@@ -249,12 +249,21 @@ static const TypeInfo vt8231_pm_info = {
};
-typedef struct SuperIOConfig {
+#define TYPE_VIA_SUPERIO "via-superio"
+OBJECT_DECLARE_SIMPLE_TYPE(ViaSuperIOState, VIA_SUPERIO)
+
+struct ViaSuperIOState {
+ ISASuperIODevice superio;
uint8_t regs[0x100];
+ const MemoryRegionOps *io_ops;
MemoryRegion io;
- ISASuperIODevice *superio;
MemoryRegion *serial_io[SUPERIO_MAX_SERIAL_PORTS];
-} SuperIOConfig;
+};
+
+static inline void via_superio_io_enable(ViaSuperIOState *s, bool enable)
+{
+ memory_region_set_enabled(&s->io, enable);
+}
static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
int offs)
@@ -270,10 +279,76 @@ static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
return mr;
}
-static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
- unsigned size)
+static void via_superio_realize(DeviceState *d, Error **errp)
+{
+ ViaSuperIOState *s = VIA_SUPERIO(d);
+ ISASuperIOClass *ic = ISA_SUPERIO_GET_CLASS(s);
+ int i;
+
+ assert(s->io_ops);
+ ic->parent_realize(d, errp);
+ if (*errp) {
+ return;
+ }
+ /* Grab io regions of serial devices so we can control them */
+ for (i = 0; i < ic->serial.count; i++) {
+ ISADevice *sd = s->superio.serial[i];
+ MemoryRegion *io = isa_address_space_io(sd);
+ MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
+ if (!mr) {
+ error_setg(errp, "Could not get io region for serial %d", i);
+ return;
+ }
+ s->serial_io[i] = mr;
+ }
+
+ memory_region_init_io(&s->io, OBJECT(d), s->io_ops, s, "via-superio", 2);
+ memory_region_set_enabled(&s->io, false);
+ /* The floppy also uses 0x3f0 and 0x3f1 but this seems to work anyway */
+ memory_region_add_subregion(isa_address_space_io(ISA_DEVICE(s)), 0x3f0,
+ &s->io);
+}
+
+static uint64_t via_superio_cfg_read(void *opaque, hwaddr addr, unsigned size)
+{
+ ViaSuperIOState *sc = opaque;
+ uint8_t idx = sc->regs[0];
+ uint8_t val = sc->regs[idx];
+
+ if (addr == 0) {
+ return idx;
+ }
+ if (addr == 1 && idx == 0) {
+ val = 0; /* reading reg 0 where we store index value */
+ }
+ trace_via_superio_read(idx, val);
+ return val;
+}
+
+static void via_superio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
+
+ sc->parent_realize = dc->realize;
+ dc->realize = via_superio_realize;
+}
+
+static const TypeInfo via_superio_info = {
+ .name = TYPE_VIA_SUPERIO,
+ .parent = TYPE_ISA_SUPERIO,
+ .instance_size = sizeof(ViaSuperIOState),
+ .class_size = sizeof(ISASuperIOClass),
+ .class_init = via_superio_class_init,
+ .abstract = true,
+};
+
+#define TYPE_VT82C686B_SUPERIO "vt82c686b-superio"
+
+static void vt82c686b_superio_cfg_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
{
- SuperIOConfig *sc = opaque;
+ ViaSuperIOState *sc = opaque;
uint8_t idx = sc->regs[0];
if (addr == 0) { /* config index register */
@@ -295,29 +370,29 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
case 0xfd ... 0xff:
/* ignore write to read only registers */
return;
- case 0xe2:
+ case 0xe2: /* Function select */
{
data &= 0x1f;
if (data & BIT(2)) { /* Serial port 1 enable */
- ISADevice *dev = sc->superio->serial[0];
+ ISADevice *dev = sc->superio.serial[0];
if (!memory_region_is_mapped(sc->serial_io[0])) {
memory_region_add_subregion(isa_address_space_io(dev),
dev->ioport_id, sc->serial_io[0]);
}
} else {
- MemoryRegion *io = isa_address_space_io(sc->superio->serial[0]);
+ MemoryRegion *io = isa_address_space_io(sc->superio.serial[0]);
if (memory_region_is_mapped(sc->serial_io[0])) {
memory_region_del_subregion(io, sc->serial_io[0]);
}
}
if (data & BIT(3)) { /* Serial port 2 enable */
- ISADevice *dev = sc->superio->serial[1];
+ ISADevice *dev = sc->superio.serial[1];
if (!memory_region_is_mapped(sc->serial_io[1])) {
memory_region_add_subregion(isa_address_space_io(dev),
dev->ioport_id, sc->serial_io[1]);
}
} else {
- MemoryRegion *io = isa_address_space_io(sc->superio->serial[1]);
+ MemoryRegion *io = isa_address_space_io(sc->superio.serial[1]);
if (memory_region_is_mapped(sc->serial_io[1])) {
memory_region_del_subregion(io, sc->serial_io[1]);
}
@@ -327,7 +402,7 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
case 0xe7: /* Serial port 1 io base address */
{
data &= 0xfe;
- sc->superio->serial[0]->ioport_id = data << 2;
+ sc->superio.serial[0]->ioport_id = data << 2;
if (memory_region_is_mapped(sc->serial_io[0])) {
memory_region_set_address(sc->serial_io[0], data << 2);
}
@@ -336,7 +411,7 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
case 0xe8: /* Serial port 2 io base address */
{
data &= 0xfe;
- sc->superio->serial[1]->ioport_id = data << 2;
+ sc->superio.serial[1]->ioport_id = data << 2;
if (memory_region_is_mapped(sc->serial_io[1])) {
memory_region_set_address(sc->serial_io[1], data << 2);
}
@@ -350,25 +425,9 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
sc->regs[idx] = data;
}
-static uint64_t superio_cfg_read(void *opaque, hwaddr addr, unsigned size)
-{
- SuperIOConfig *sc = opaque;
- uint8_t idx = sc->regs[0];
- uint8_t val = sc->regs[idx];
-
- if (addr == 0) {
- return idx;
- }
- if (addr == 1 && idx == 0) {
- val = 0; /* reading reg 0 where we store index value */
- }
- trace_via_superio_read(idx, val);
- return val;
-}
-
-static const MemoryRegionOps superio_cfg_ops = {
- .read = superio_cfg_read,
- .write = superio_cfg_write,
+static const MemoryRegionOps vt82c686b_superio_cfg_ops = {
+ .read = via_superio_cfg_read,
+ .write = vt82c686b_superio_cfg_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.impl = {
.min_access_size = 1,
@@ -376,13 +435,66 @@ static const MemoryRegionOps superio_cfg_ops = {
},
};
+static void vt82c686b_superio_reset(DeviceState *dev)
+{
+ ViaSuperIOState *s = VIA_SUPERIO(dev);
+
+ memset(s->regs, 0, sizeof(s->regs));
+ /* Device ID */
+ vt82c686b_superio_cfg_write(s, 0, 0xe0, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0x3c, 1);
+ /* Function select - all disabled */
+ vt82c686b_superio_cfg_write(s, 0, 0xe2, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0x03, 1);
+ /* Floppy ctrl base addr */
+ vt82c686b_superio_cfg_write(s, 0, 0xe3, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0xfc, 1);
+ /* Parallel port base addr */
+ vt82c686b_superio_cfg_write(s, 0, 0xe6, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0xde, 1);
+ /* Serial port 1 base addr */
+ vt82c686b_superio_cfg_write(s, 0, 0xe7, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0xfe, 1);
+ /* Serial port 2 base addr */
+ vt82c686b_superio_cfg_write(s, 0, 0xe8, 1);
+ vt82c686b_superio_cfg_write(s, 1, 0xbe, 1);
+
+ vt82c686b_superio_cfg_write(s, 0, 0, 1);
+}
+
+static void vt82c686b_superio_init(Object *obj)
+{
+ VIA_SUPERIO(obj)->io_ops = &vt82c686b_superio_cfg_ops;
+}
+
+static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
+
+ dc->reset = vt82c686b_superio_reset;
+ sc->serial.count = 2;
+ sc->parallel.count = 1;
+ sc->ide.count = 0; /* emulated by via-ide */
+ sc->floppy.count = 1;
+}
+
+static const TypeInfo vt82c686b_superio_info = {
+ .name = TYPE_VT82C686B_SUPERIO,
+ .parent = TYPE_VIA_SUPERIO,
+ .instance_size = sizeof(ViaSuperIOState),
+ .instance_init = vt82c686b_superio_init,
+ .class_size = sizeof(ISASuperIOClass),
+ .class_init = vt82c686b_superio_class_init,
+};
+
OBJECT_DECLARE_SIMPLE_TYPE(VT82C686BISAState, VT82C686B_ISA)
struct VT82C686BISAState {
PCIDevice dev;
qemu_irq cpu_intr;
- SuperIOConfig superio_cfg;
+ ViaSuperIOState *via_sio;
};
static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
@@ -400,7 +512,7 @@ static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
pci_default_write_config(d, addr, val, len);
if (addr == 0x85) {
/* BIT(1): enable or disable superio config io ports */
- memory_region_set_enabled(&s->superio_cfg.io, val & BIT(1));
+ via_superio_io_enable(s->via_sio, val & BIT(1));
}
}
@@ -432,13 +544,6 @@ static void vt82c686b_isa_reset(DeviceState *dev)
pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
pci_conf[0x5f] = 0x04;
pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
-
- s->superio_cfg.regs[0xe0] = 0x3c; /* Device ID */
- s->superio_cfg.regs[0xe2] = 0x03; /* Function select */
- s->superio_cfg.regs[0xe3] = 0xfc; /* Floppy ctrl base addr */
- s->superio_cfg.regs[0xe6] = 0xde; /* Parallel port base addr */
- s->superio_cfg.regs[0xe7] = 0xfe; /* Serial port 1 base addr */
- s->superio_cfg.regs[0xe8] = 0xbe; /* Serial port 2 base addr */
}
static void vt82c686b_realize(PCIDevice *d, Error **errp)
@@ -447,7 +552,6 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
DeviceState *dev = DEVICE(d);
ISABus *isa_bus;
qemu_irq *isa_irq;
- ISASuperIOClass *ic;
int i;
qdev_init_gpio_out(dev, &s->cpu_intr, 1);
@@ -457,9 +561,8 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
i8254_pit_init(isa_bus, 0x40, 0, NULL);
i8257_dma_init(isa_bus, 0);
- s->superio_cfg.superio = ISA_SUPERIO(isa_create_simple(isa_bus,
- TYPE_VT82C686B_SUPERIO));
- ic = ISA_SUPERIO_GET_CLASS(s->superio_cfg.superio);
+ s->via_sio = VIA_SUPERIO(isa_create_simple(isa_bus,
+ TYPE_VT82C686B_SUPERIO));
mc146818_rtc_init(isa_bus, 2000, NULL);
for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
@@ -467,31 +570,6 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
d->wmask[i] = 0;
}
}
-
- memory_region_init_io(&s->superio_cfg.io, OBJECT(d), &superio_cfg_ops,
- &s->superio_cfg, "superio_cfg", 2);
- memory_region_set_enabled(&s->superio_cfg.io, false);
- /*
- * The floppy also uses 0x3f0 and 0x3f1.
- * But we do not emulate a floppy, so just set it here.
- */
- memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
- &s->superio_cfg.io);
-
- /* Grab io regions of serial devices so we can control them */
- for (i = 0; i < ic->serial.count; i++) {
- ISADevice *sd = s->superio_cfg.superio->serial[i];
- MemoryRegion *io = isa_address_space_io(sd);
- MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
- if (!mr) {
- error_setg(errp, "Could not get io region for serial %d", i);
- return;
- }
- s->superio_cfg.serial_io[i] = mr;
- if (memory_region_is_mapped(mr)) {
- memory_region_del_subregion(io, mr);
- }
- }
}
static void via_class_init(ObjectClass *klass, void *data)
@@ -527,32 +605,14 @@ static const TypeInfo via_info = {
};
-static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
-{
- ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
-
- sc->serial.count = 2;
- sc->parallel.count = 1;
- sc->ide.count = 0;
- sc->floppy.count = 1;
-}
-
-static const TypeInfo via_superio_info = {
- .name = TYPE_VT82C686B_SUPERIO,
- .parent = TYPE_ISA_SUPERIO,
- .instance_size = sizeof(ISASuperIODevice),
- .class_size = sizeof(ISASuperIOClass),
- .class_init = vt82c686b_superio_class_init,
-};
-
-
static void vt82c686b_register_types(void)
{
type_register_static(&via_pm_info);
type_register_static(&vt82c686b_pm_info);
type_register_static(&vt8231_pm_info);
- type_register_static(&via_info);
type_register_static(&via_superio_info);
+ type_register_static(&vt82c686b_superio_info);
+ type_register_static(&via_info);
}
type_init(vt82c686b_register_types)
diff --git a/include/hw/isa/vt82c686.h b/include/hw/isa/vt82c686.h
index 9b6d610e83..0692b9a527 100644
--- a/include/hw/isa/vt82c686.h
+++ b/include/hw/isa/vt82c686.h
@@ -2,7 +2,6 @@
#define HW_VT82C686_H
#define TYPE_VT82C686B_ISA "vt82c686b-isa"
-#define TYPE_VT82C686B_SUPERIO "vt82c686b-superio"
#define TYPE_VT82C686B_PM "vt82c686b-pm"
#define TYPE_VT8231_PM "vt8231-pm"
#define TYPE_VIA_AC97 "via-ac97"
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
` (4 preceding siblings ...)
2021-02-22 15:22 ` [PATCH v3 3/6] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO BALATON Zoltan
@ 2021-02-22 15:22 ` BALATON Zoltan
2021-02-22 16:40 ` Philippe Mathieu-Daudé
2021-02-23 4:40 ` David Gibson
2021-02-22 16:19 ` [PATCH v3 0/6] Pegasos2 emulation no-reply
2021-02-23 4:42 ` David Gibson
7 siblings, 2 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 15:22 UTC (permalink / raw)
To: qemu-devel, qemu-ppc; +Cc: Peter Maydell, Paolo Bonzini, f4bug, David Gibson
The Marvell Discovery II aka. MV64361 is a PowerPC system controller
chip that is used on the pegasos2 PPC board. This adds emulation of it
that models the device enough to boot guests on this board. The
mv643xx.h header with register definitions is taken from Linux 4.15.10
only fixing end of line white space errors and removing not needed
parts, it's otherwise keeps Linux formatting.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/pci-host/Kconfig | 3 +
hw/pci-host/meson.build | 2 +
hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++++++++++++
hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++++++++++++
hw/pci-host/trace-events | 6 +
include/hw/pci-host/mv64361.h | 8 +
include/hw/pci/pci_ids.h | 1 +
7 files changed, 1905 insertions(+)
create mode 100644 hw/pci-host/mv64361.c
create mode 100644 hw/pci-host/mv643xx.h
create mode 100644 include/hw/pci-host/mv64361.h
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8b8c763c28..65a983d6fd 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -68,3 +68,6 @@ config PCI_POWERNV
config REMOTE_PCIHOST
bool
+
+config MV64361
+ bool
diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
index 1847c69905..3f9e716cfa 100644
--- a/hw/pci-host/meson.build
+++ b/hw/pci-host/meson.build
@@ -18,6 +18,8 @@ pci_ss.add(when: 'CONFIG_GRACKLE_PCI', if_true: files('grackle.c'))
pci_ss.add(when: 'CONFIG_UNIN_PCI', if_true: files('uninorth.c'))
# PowerPC E500 boards
pci_ss.add(when: 'CONFIG_PPCE500_PCI', if_true: files('ppce500.c'))
+# Pegasos2
+pci_ss.add(when: 'CONFIG_MV64361', if_true: files('mv64361.c'))
# ARM devices
pci_ss.add(when: 'CONFIG_VERSATILE_PCI', if_true: files('versatile.c'))
diff --git a/hw/pci-host/mv64361.c b/hw/pci-host/mv64361.c
new file mode 100644
index 0000000000..d71402f8b5
--- /dev/null
+++ b/hw/pci-host/mv64361.c
@@ -0,0 +1,966 @@
+/*
+ * Marvell Discovery II MV64361 System Controller for
+ * QEMU PowerPC CHRP (Genesi/bPlan Pegasos II) hardware System Emulator
+ *
+ * Copyright (c) 2018-2020 BALATON Zoltan
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_host.h"
+#include "hw/irq.h"
+#include "hw/intc/i8259.h"
+#include "hw/qdev-properties.h"
+#include "exec/address-spaces.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "trace.h"
+#include "hw/pci-host/mv64361.h"
+#include "mv643xx.h"
+
+#define TYPE_MV64361_PCI_BRIDGE "mv64361-pcibridge"
+
+static void mv64361_pcibridge_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->vendor_id = PCI_VENDOR_ID_MARVELL;
+ k->device_id = PCI_DEVICE_ID_MARVELL_MV6436X;
+ k->class_id = PCI_CLASS_BRIDGE_HOST;
+ /*
+ * PCI-facing part of the host bridge,
+ * not usable without the host-facing part
+ */
+ dc->user_creatable = false;
+}
+
+static const TypeInfo mv64361_pcibridge_info = {
+ .name = TYPE_MV64361_PCI_BRIDGE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PCIDevice),
+ .class_init = mv64361_pcibridge_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ { },
+ },
+};
+
+
+#define TYPE_MV64361_PCI "mv64361-pcihost"
+OBJECT_DECLARE_SIMPLE_TYPE(MV64361PCIState, MV64361_PCI)
+
+struct MV64361PCIState {
+ PCIHostState parent_obj;
+
+ uint8_t index;
+ MemoryRegion io;
+ MemoryRegion mem;
+ qemu_irq irq[PCI_NUM_PINS];
+
+ uint32_t io_base;
+ uint32_t io_size;
+ uint32_t mem_base[4];
+ uint32_t mem_size[4];
+ uint64_t remap[5];
+};
+
+static int mv64361_pcihost_map_irq(PCIDevice *pci_dev, int n)
+{
+ return (n + PCI_SLOT(pci_dev->devfn)) % PCI_NUM_PINS;
+}
+
+static void mv64361_pcihost_set_irq(void *opaque, int n, int level)
+{
+ MV64361PCIState *s = opaque;
+ qemu_set_irq(s->irq[n], level);
+}
+
+static void mv64361_pcihost_realize(DeviceState *dev, Error **errp)
+{
+ MV64361PCIState *s = MV64361_PCI(dev);
+ PCIHostState *h = PCI_HOST_BRIDGE(dev);
+ char *name;
+
+ name = g_strdup_printf("pci%d-io", s->index);
+ memory_region_init(&s->io, OBJECT(dev), name, 0x10000);
+ g_free(name);
+ name = g_strdup_printf("pci%d-mem", s->index);
+ memory_region_init(&s->mem, OBJECT(dev), name, 1ULL << 32);
+ g_free(name);
+ name = g_strdup_printf("pci.%d", s->index);
+ h->bus = pci_register_root_bus(dev, name, mv64361_pcihost_set_irq,
+ mv64361_pcihost_map_irq, dev,
+ &s->mem, &s->io, 0, 4, TYPE_PCI_BUS);
+ g_free(name);
+ pci_create_simple(h->bus, 0, TYPE_MV64361_PCI_BRIDGE);
+}
+
+static Property mv64361_pcihost_props[] = {
+ DEFINE_PROP_UINT8("index", MV64361PCIState, index, 0),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void mv64361_pcihost_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = mv64361_pcihost_realize;
+ device_class_set_props(dc, mv64361_pcihost_props);
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+}
+
+static const TypeInfo mv64361_pcihost_info = {
+ .name = TYPE_MV64361_PCI,
+ .parent = TYPE_PCI_HOST_BRIDGE,
+ .instance_size = sizeof(MV64361PCIState),
+ .class_init = mv64361_pcihost_class_init,
+};
+
+static void mv64361_pci_register_types(void)
+{
+ type_register_static(&mv64361_pcihost_info);
+ type_register_static(&mv64361_pcibridge_info);
+}
+
+type_init(mv64361_pci_register_types)
+
+
+OBJECT_DECLARE_SIMPLE_TYPE(MV64361State, MV64361)
+
+struct MV64361State {
+ SysBusDevice parent_obj;
+
+ MemoryRegion regs;
+ MV64361PCIState pci[2];
+ MemoryRegion cpu_win[19];
+ qemu_irq cpu_irq;
+
+ /* registers state */
+ uint32_t cpu_conf;
+ uint32_t regs_base;
+ uint32_t base_addr_enable;
+ uint64_t main_int_cr;
+ uint64_t cpu0_int_mask;
+ uint32_t gpp_io;
+ uint32_t gpp_level;
+ uint32_t gpp_value;
+ uint32_t gpp_int_cr;
+ uint32_t gpp_int_mask;
+ bool gpp_int_level;
+};
+
+enum mv64361_irq_cause {
+ MV64361_IRQ_DEVERR = 1,
+ MV64361_IRQ_DMAERR,
+ MV64361_IRQ_CPUERR,
+ MV64361_IRQ_IDMA0,
+ MV64361_IRQ_IDMA1,
+ MV64361_IRQ_IDMA2,
+ MV64361_IRQ_IDMA3,
+ MV64361_IRQ_TIMER0,
+ MV64361_IRQ_TIMER1,
+ MV64361_IRQ_TIMER2,
+ MV64361_IRQ_TIMER3,
+ MV64361_IRQ_PCI0,
+ MV64361_IRQ_SRAMERR,
+ MV64361_IRQ_GBEERR,
+ MV64361_IRQ_CERR,
+ MV64361_IRQ_PCI1,
+ MV64361_IRQ_DRAMERR,
+ MV64361_IRQ_WDNMI,
+ MV64361_IRQ_WDE,
+ MV64361_IRQ_PCI0IN,
+ MV64361_IRQ_PCI0OUT,
+ MV64361_IRQ_PCI1IN,
+ MV64361_IRQ_PCI1OUT,
+ MV64361_IRQ_P1_GPP0_7,
+ MV64361_IRQ_P1_GPP8_15,
+ MV64361_IRQ_P1_GPP16_23,
+ MV64361_IRQ_P1_GPP24_31,
+ MV64361_IRQ_P1_CPU_DB,
+ /* 29-31: reserved */
+ MV64361_IRQ_GBE0 = 32,
+ MV64361_IRQ_GBE1,
+ MV64361_IRQ_GBE2,
+ /* 35: reserved */
+ MV64361_IRQ_SDMA0 = 36,
+ MV64361_IRQ_TWSI,
+ MV64361_IRQ_SDMA1,
+ MV64361_IRQ_BRG,
+ MV64361_IRQ_MPSC0,
+ MV64361_IRQ_MPSC1,
+ MV64361_IRQ_G0RX,
+ MV64361_IRQ_G0TX,
+ MV64361_IRQ_G0MISC,
+ MV64361_IRQ_G1RX,
+ MV64361_IRQ_G1TX,
+ MV64361_IRQ_G1MISC,
+ MV64361_IRQ_G2RX,
+ MV64361_IRQ_G2TX,
+ MV64361_IRQ_G2MISC,
+ /* 51-55: reserved */
+ MV64361_IRQ_P0_GPP0_7 = 56,
+ MV64361_IRQ_P0_GPP8_15,
+ MV64361_IRQ_P0_GPP16_23,
+ MV64361_IRQ_P0_GPP24_31,
+ MV64361_IRQ_P0_CPU_DB,
+ /* 61-63: reserved */
+};
+
+PCIBus *mv64361_get_pci_bus(DeviceState *dev, int n)
+{
+ MV64361State *mv = MV64361(dev);
+ return PCI_HOST_BRIDGE(&mv->pci[n])->bus;
+}
+
+static void unmap_region(MemoryRegion *mr)
+{
+ if (memory_region_is_mapped(mr)) {
+ memory_region_del_subregion(get_system_memory(), mr);
+ object_unparent(OBJECT(mr));
+ }
+}
+
+static void map_pci_region(MemoryRegion *mr, MemoryRegion *parent,
+ struct Object *owner, const char *name,
+ hwaddr poffs, uint64_t size, hwaddr moffs)
+{
+ memory_region_init_alias(mr, owner, name, parent, poffs, size);
+ memory_region_add_subregion(get_system_memory(), moffs, mr);
+ trace_mv64361_region_map(name, poffs, size, moffs);
+}
+
+static void setup_mem_windows(MV64361State *s, uint32_t val)
+{
+ MV64361PCIState *p;
+ MemoryRegion *mr;
+ uint32_t mask;
+ int i;
+
+ val &= 0x1fffff;
+ for (mask = 1, i = 0; i < 21; i++, mask <<= 1) {
+ if ((val & mask) != (s->base_addr_enable & mask)) {
+ trace_mv64361_region_enable(!(val & mask) ? "enable" : "disable", i);
+ switch (i) {
+ /*
+ * 0-3 are SDRAM chip selects but we map all RAM directly
+ * 4-7 are device chip selects (not sure what those are)
+ * 8 is Boot device (ROM) chip select but we map that directly too
+ */
+ case 9:
+ p = &s->pci[0];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->io, OBJECT(s), "pci0-io-win",
+ p->remap[4], (p->io_size + 1) << 16,
+ (p->io_base & 0xfffff) << 16);
+ }
+ break;
+ case 10:
+ p = &s->pci[0];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem0-win",
+ p->remap[0], (p->mem_size[0] + 1) << 16,
+ (p->mem_base[0] & 0xfffff) << 16);
+ }
+ break;
+ case 11:
+ p = &s->pci[0];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem1-win",
+ p->remap[1], (p->mem_size[1] + 1) << 16,
+ (p->mem_base[1] & 0xfffff) << 16);
+ }
+ break;
+ case 12:
+ p = &s->pci[0];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem2-win",
+ p->remap[2], (p->mem_size[2] + 1) << 16,
+ (p->mem_base[2] & 0xfffff) << 16);
+ }
+ break;
+ case 13:
+ p = &s->pci[0];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem3-win",
+ p->remap[3], (p->mem_size[3] + 1) << 16,
+ (p->mem_base[3] & 0xfffff) << 16);
+ }
+ break;
+ case 14:
+ p = &s->pci[1];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->io, OBJECT(s), "pci1-io-win",
+ p->remap[4], (p->io_size + 1) << 16,
+ (p->io_base & 0xfffff) << 16);
+ }
+ break;
+ case 15:
+ p = &s->pci[1];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem0-win",
+ p->remap[0], (p->mem_size[0] + 1) << 16,
+ (p->mem_base[0] & 0xfffff) << 16);
+ }
+ break;
+ case 16:
+ p = &s->pci[1];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem1-win",
+ p->remap[1], (p->mem_size[1] + 1) << 16,
+ (p->mem_base[1] & 0xfffff) << 16);
+ }
+ break;
+ case 17:
+ p = &s->pci[1];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem2-win",
+ p->remap[2], (p->mem_size[2] + 1) << 16,
+ (p->mem_base[2] & 0xfffff) << 16);
+ }
+ break;
+ case 18:
+ p = &s->pci[1];
+ mr = &s->cpu_win[i];
+ unmap_region(mr);
+ if (!(val & mask)) {
+ map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem3-win",
+ p->remap[3], (p->mem_size[3] + 1) << 16,
+ (p->mem_base[3] & 0xfffff) << 16);
+ }
+ break;
+ /* 19 is integrated SRAM */
+ case 20:
+ mr = &s->regs;
+ unmap_region(mr);
+ if (!(val & mask)) {
+ memory_region_add_subregion(get_system_memory(),
+ (s->regs_base & 0xfffff) << 16, mr);
+ }
+ break;
+ }
+ }
+ }
+}
+
+static void mv64361_update_irq(void *opaque, int n, int level)
+{
+ MV64361State *s = opaque;
+ uint64_t val = s->main_int_cr;
+
+ if (level) {
+ val |= BIT_ULL(n);
+ } else {
+ val &= ~BIT_ULL(n);
+ }
+ if ((s->main_int_cr & s->cpu0_int_mask) != (val & s->cpu0_int_mask)) {
+ qemu_set_irq(s->cpu_irq, level);
+ }
+ s->main_int_cr = val;
+}
+
+static uint64_t mv64361_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ MV64361State *s = MV64361(opaque);
+ uint32_t ret = 0;
+
+ switch (addr) {
+ case MV64340_CPU_CONFIG:
+ ret = s->cpu_conf;
+ break;
+ case MV64340_PCI_0_IO_BASE_ADDR:
+ ret = s->pci[0].io_base;
+ break;
+ case MV64340_PCI_0_IO_SIZE:
+ ret = s->pci[0].io_size;
+ break;
+ case MV64340_PCI_0_IO_ADDR_REMAP:
+ ret = s->pci[0].remap[4] >> 16;
+ break;
+ case MV64340_PCI_0_MEMORY0_BASE_ADDR:
+ ret = s->pci[0].mem_base[0];
+ break;
+ case MV64340_PCI_0_MEMORY0_SIZE:
+ ret = s->pci[0].mem_size[0];
+ break;
+ case MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP:
+ ret = (s->pci[0].remap[0] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP:
+ ret = s->pci[0].remap[0] >> 32;
+ break;
+ case MV64340_PCI_0_MEMORY1_BASE_ADDR:
+ ret = s->pci[0].mem_base[1];
+ break;
+ case MV64340_PCI_0_MEMORY1_SIZE:
+ ret = s->pci[0].mem_size[1];
+ break;
+ case MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP:
+ ret = (s->pci[0].remap[1] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP:
+ ret = s->pci[0].remap[1] >> 32;
+ break;
+ case MV64340_PCI_0_MEMORY2_BASE_ADDR:
+ ret = s->pci[0].mem_base[2];
+ break;
+ case MV64340_PCI_0_MEMORY2_SIZE:
+ ret = s->pci[0].mem_size[2];
+ break;
+ case MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP:
+ ret = (s->pci[0].remap[2] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP:
+ ret = s->pci[0].remap[2] >> 32;
+ break;
+ case MV64340_PCI_0_MEMORY3_BASE_ADDR:
+ ret = s->pci[0].mem_base[3];
+ break;
+ case MV64340_PCI_0_MEMORY3_SIZE:
+ ret = s->pci[0].mem_size[3];
+ break;
+ case MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP:
+ ret = (s->pci[0].remap[3] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP:
+ ret = s->pci[0].remap[3] >> 32;
+ break;
+ case MV64340_PCI_1_IO_BASE_ADDR:
+ ret = s->pci[1].io_base;
+ break;
+ case MV64340_PCI_1_IO_SIZE:
+ ret = s->pci[1].io_size;
+ break;
+ case MV64340_PCI_1_IO_ADDR_REMAP:
+ ret = s->pci[1].remap[4] >> 16;
+ break;
+ case MV64340_PCI_1_MEMORY0_BASE_ADDR:
+ ret = s->pci[1].mem_base[0];
+ break;
+ case MV64340_PCI_1_MEMORY0_SIZE:
+ ret = s->pci[1].mem_size[0];
+ break;
+ case MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP:
+ ret = (s->pci[1].remap[0] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP:
+ ret = s->pci[1].remap[0] >> 32;
+ break;
+ case MV64340_PCI_1_MEMORY1_BASE_ADDR:
+ ret = s->pci[1].mem_base[1];
+ break;
+ case MV64340_PCI_1_MEMORY1_SIZE:
+ ret = s->pci[1].mem_size[1];
+ break;
+ case MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP:
+ ret = (s->pci[1].remap[1] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP:
+ ret = s->pci[1].remap[1] >> 32;
+ break;
+ case MV64340_PCI_1_MEMORY2_BASE_ADDR:
+ ret = s->pci[1].mem_base[2];
+ break;
+ case MV64340_PCI_1_MEMORY2_SIZE:
+ ret = s->pci[1].mem_size[2];
+ break;
+ case MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP:
+ ret = (s->pci[1].remap[2] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP:
+ ret = s->pci[1].remap[2] >> 32;
+ break;
+ case MV64340_PCI_1_MEMORY3_BASE_ADDR:
+ ret = s->pci[1].mem_base[3];
+ break;
+ case MV64340_PCI_1_MEMORY3_SIZE:
+ ret = s->pci[1].mem_size[3];
+ break;
+ case MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP:
+ ret = (s->pci[1].remap[3] & 0xffff0000) >> 16;
+ break;
+ case MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP:
+ ret = s->pci[1].remap[3] >> 32;
+ break;
+ case MV64340_INTERNAL_SPACE_BASE_ADDR:
+ ret = s->regs_base;
+ break;
+ case MV64340_BASE_ADDR_ENABLE:
+ ret = s->base_addr_enable;
+ break;
+ case MV64340_PCI_0_CONFIG_ADDR:
+ ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(&s->pci[0]), 0, size);
+ break;
+ case MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG ...
+ MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG + 3:
+ ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(&s->pci[0]),
+ addr - MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, size);
+ break;
+ case MV64340_PCI_1_CONFIG_ADDR:
+ ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(&s->pci[1]), 0, size);
+ break;
+ case MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG ...
+ MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG + 3:
+ ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(&s->pci[1]),
+ addr - MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, size);
+ break;
+ case MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG:
+ /* FIXME: Should this be sent via the PCI bus somehow? */
+ if (s->gpp_int_level && (s->gpp_value & BIT(31))) {
+ ret = pic_read_irq(isa_pic);
+ }
+ break;
+ case MV64340_MAIN_INTERRUPT_CAUSE_LOW:
+ ret = s->main_int_cr;
+ break;
+ case MV64340_MAIN_INTERRUPT_CAUSE_HIGH:
+ ret = s->main_int_cr >> 32;
+ break;
+ case MV64340_CPU_INTERRUPT0_MASK_LOW:
+ ret = s->cpu0_int_mask;
+ break;
+ case MV64340_CPU_INTERRUPT0_MASK_HIGH:
+ ret = s->cpu0_int_mask >> 32;
+ break;
+ case MV64340_CPU_INTERRUPT0_SELECT_CAUSE:
+ ret = s->main_int_cr;
+ if (s->main_int_cr & s->cpu0_int_mask) {
+ if (!(s->main_int_cr & s->cpu0_int_mask & 0xffffffff)) {
+ ret = s->main_int_cr >> 32 | BIT(30);
+ } else if ((s->main_int_cr & s->cpu0_int_mask) >> 32) {
+ ret |= BIT(31);
+ }
+ }
+ break;
+ case MV64340_CUNIT_ARBITER_CONTROL_REG:
+ ret = 0x11ff0000 | (s->gpp_int_level << 10);
+ break;
+ case MV64340_GPP_IO_CONTROL:
+ ret = s->gpp_io;
+ break;
+ case MV64340_GPP_LEVEL_CONTROL:
+ ret = s->gpp_level;
+ break;
+ case MV64340_GPP_VALUE:
+ ret = s->gpp_value;
+ break;
+ case MV64340_GPP_VALUE_SET:
+ case MV64340_GPP_VALUE_CLEAR:
+ ret = 0;
+ break;
+ case MV64340_GPP_INTERRUPT_CAUSE:
+ ret = s->gpp_int_cr;
+ break;
+ case MV64340_GPP_INTERRUPT_MASK0:
+ case MV64340_GPP_INTERRUPT_MASK1:
+ ret = s->gpp_int_mask;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register read 0x%"
+ HWADDR_PRIx "\n", __func__, addr);
+ break;
+ }
+ if (addr != MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG) {
+ trace_mv64361_reg_read(addr, ret);
+ }
+ return ret;
+}
+
+static void warn_swap_bit(uint64_t val)
+{
+ if ((val & 0x3000000ULL) >> 24 != 1) {
+ qemu_log_mask(LOG_UNIMP, "%s: Data swap not implemented", __func__);
+ }
+}
+
+static void mv64361_set_pci_mem_remap(MV64361State *s, int bus, int idx,
+ uint64_t val, bool high)
+{
+ if (high) {
+ s->pci[bus].remap[idx] = val;
+ } else {
+ s->pci[bus].remap[idx] &= 0xffffffff00000000ULL;
+ s->pci[bus].remap[idx] |= (val & 0xffffULL) << 16;
+ }
+}
+
+static void mv64361_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned int size)
+{
+ MV64361State *s = MV64361(opaque);
+
+ trace_mv64361_reg_write(addr, val);
+ switch (addr) {
+ case MV64340_CPU_CONFIG:
+ s->cpu_conf = val & 0xe4e3bffULL;
+ s->cpu_conf |= BIT(23);
+ break;
+ case MV64340_PCI_0_IO_BASE_ADDR:
+ s->pci[0].io_base = val & 0x30fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ s->pci[0].remap[4] = (val & 0xffffULL) << 16;
+ }
+ break;
+ case MV64340_PCI_0_IO_SIZE:
+ s->pci[0].io_size = val & 0xffffULL;
+ break;
+ case MV64340_PCI_0_IO_ADDR_REMAP:
+ s->pci[0].remap[4] = (val & 0xffffULL) << 16;
+ break;
+ case MV64340_PCI_0_MEMORY0_BASE_ADDR:
+ s->pci[0].mem_base[0] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 0, 0, val, false);
+ }
+ break;
+ case MV64340_PCI_0_MEMORY0_SIZE:
+ s->pci[0].mem_size[0] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP:
+ case MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 0, 0, val,
+ (addr == MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_0_MEMORY1_BASE_ADDR:
+ s->pci[0].mem_base[1] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 0, 1, val, false);
+ }
+ break;
+ case MV64340_PCI_0_MEMORY1_SIZE:
+ s->pci[0].mem_size[1] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP:
+ case MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 0, 1, val,
+ (addr == MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_0_MEMORY2_BASE_ADDR:
+ s->pci[0].mem_base[2] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 0, 2, val, false);
+ }
+ break;
+ case MV64340_PCI_0_MEMORY2_SIZE:
+ s->pci[0].mem_size[2] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP:
+ case MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 0, 2, val,
+ (addr == MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_0_MEMORY3_BASE_ADDR:
+ s->pci[0].mem_base[3] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 0, 3, val, false);
+ }
+ break;
+ case MV64340_PCI_0_MEMORY3_SIZE:
+ s->pci[0].mem_size[3] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP:
+ case MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 0, 3, val,
+ (addr == MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_1_IO_BASE_ADDR:
+ s->pci[1].io_base = val & 0x30fffffULL;
+ warn_swap_bit(val);
+ break;
+ if (!(s->cpu_conf & BIT(27))) {
+ s->pci[1].remap[4] = (val & 0xffffULL) << 16;
+ }
+ break;
+ case MV64340_PCI_1_IO_SIZE:
+ s->pci[1].io_size = val & 0xffffULL;
+ break;
+ case MV64340_PCI_1_MEMORY0_BASE_ADDR:
+ s->pci[1].mem_base[0] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 1, 0, val, false);
+ }
+ break;
+ case MV64340_PCI_1_MEMORY0_SIZE:
+ s->pci[1].mem_size[0] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP:
+ case MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 1, 0, val,
+ (addr == MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_1_MEMORY1_BASE_ADDR:
+ s->pci[1].mem_base[1] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 1, 1, val, false);
+ }
+ break;
+ case MV64340_PCI_1_MEMORY1_SIZE:
+ s->pci[1].mem_size[1] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP:
+ case MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 1, 1, val,
+ (addr == MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_1_MEMORY2_BASE_ADDR:
+ s->pci[1].mem_base[2] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 1, 2, val, false);
+ }
+ break;
+ case MV64340_PCI_1_MEMORY2_SIZE:
+ s->pci[1].mem_size[2] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP:
+ case MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 1, 2, val,
+ (addr == MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_PCI_1_MEMORY3_BASE_ADDR:
+ s->pci[1].mem_base[3] = val & 0x70fffffULL;
+ warn_swap_bit(val);
+ if (!(s->cpu_conf & BIT(27))) {
+ mv64361_set_pci_mem_remap(s, 1, 3, val, false);
+ }
+ break;
+ case MV64340_PCI_1_MEMORY3_SIZE:
+ s->pci[1].mem_size[3] = val & 0xffffULL;
+ break;
+ case MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP:
+ case MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP:
+ mv64361_set_pci_mem_remap(s, 1, 3, val,
+ (addr == MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP));
+ break;
+ case MV64340_INTERNAL_SPACE_BASE_ADDR:
+ s->regs_base = val & 0xfffffULL;
+ break;
+ case MV64340_BASE_ADDR_ENABLE:
+ setup_mem_windows(s, val);
+ s->base_addr_enable = val & 0x1fffffULL;
+ break;
+ case MV64340_PCI_0_CONFIG_ADDR:
+ pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(&s->pci[0]), 0, val, size);
+ break;
+ case MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG ...
+ MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG + 3:
+ pci_host_data_le_ops.write(PCI_HOST_BRIDGE(&s->pci[0]),
+ addr - MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, val, size);
+ break;
+ case MV64340_PCI_1_CONFIG_ADDR:
+ pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(&s->pci[1]), 0, val, size);
+ break;
+ case MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG ...
+ MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG + 3:
+ pci_host_data_le_ops.write(PCI_HOST_BRIDGE(&s->pci[1]),
+ addr - MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, val, size);
+ break;
+ case MV64340_CPU_INTERRUPT0_MASK_LOW:
+ s->cpu0_int_mask &= 0xffffffff00000000ULL;
+ s->cpu0_int_mask |= val & 0xffffffffULL;
+ break;
+ case MV64340_CPU_INTERRUPT0_MASK_HIGH:
+ s->cpu0_int_mask &= 0xffffffffULL;
+ s->cpu0_int_mask |= val << 32;
+ break;
+ case MV64340_CUNIT_ARBITER_CONTROL_REG:
+ s->gpp_int_level = !!(val & BIT(10));
+ break;
+ case MV64340_GPP_IO_CONTROL:
+ s->gpp_io = val;
+ break;
+ case MV64340_GPP_LEVEL_CONTROL:
+ s->gpp_level = val;
+ break;
+ case MV64340_GPP_VALUE:
+ s->gpp_value &= ~s->gpp_io;
+ s->gpp_value |= val & s->gpp_io;
+ break;
+ case MV64340_GPP_VALUE_SET:
+ s->gpp_value |= val & s->gpp_io;
+ break;
+ case MV64340_GPP_VALUE_CLEAR:
+ s->gpp_value &= ~(val & s->gpp_io);
+ break;
+ case MV64340_GPP_INTERRUPT_CAUSE:
+ if (!s->gpp_int_level && val != s->gpp_int_cr) {
+ int i;
+ uint32_t ch = s->gpp_int_cr ^ val;
+ s->gpp_int_cr = val;
+ for (i = 0; i < 4; i++) {
+ if ((ch & 0xff << i) && !(val & 0xff << i)) {
+ mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + i, 0);
+ }
+ }
+ } else {
+ s->gpp_int_cr = val;
+ }
+ break;
+ case MV64340_GPP_INTERRUPT_MASK0:
+ case MV64340_GPP_INTERRUPT_MASK1:
+ s->gpp_int_mask = val;
+ break;
+ default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register write 0x%"
+ HWADDR_PRIx " = %"PRIx64"\n", __func__, addr, val);
+ break;
+ }
+}
+
+static const MemoryRegionOps mv64361_ops = {
+ .read = mv64361_read,
+ .write = mv64361_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void mv64361_gpp_irq(void *opaque, int n, int level)
+{
+ MV64361State *s = opaque;
+ uint32_t mask = BIT(n);
+ uint32_t val = s->gpp_value & ~mask;
+
+ if (s->gpp_level & mask) {
+ level = !level;
+ }
+ val |= level << n;
+ if (val > s->gpp_value) {
+ s->gpp_value = val;
+ s->gpp_int_cr |= mask;
+ if (s->gpp_int_mask & mask) {
+ mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + n / 8, 1);
+ }
+ } else if (val < s->gpp_value) {
+ int b = n / 8;
+ s->gpp_value = val;
+ if (s->gpp_int_level && !(val & 0xff << b)) {
+ mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + b, 0);
+ }
+ }
+}
+
+static void mv64361_realize(DeviceState *dev, Error **errp)
+{
+ MV64361State *s = MV64361(dev);
+ int i;
+
+ s->base_addr_enable = 0x1fffff;
+ memory_region_init_io(&s->regs, OBJECT(s), &mv64361_ops, s,
+ TYPE_MV64361, 0x10000);
+ for (i = 0; i < 2; i++) {
+ char *name = g_strdup_printf("pcihost%d", i);
+ object_initialize_child(OBJECT(dev), name, &s->pci[i],
+ TYPE_MV64361_PCI);
+ g_free(name);
+ DeviceState *pci = DEVICE(&s->pci[i]);
+ qdev_prop_set_uint8(pci, "index", i);
+ sysbus_realize_and_unref(SYS_BUS_DEVICE(pci), &error_fatal);
+ }
+ sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->cpu_irq);
+ qdev_init_gpio_in_named(dev, mv64361_gpp_irq, "gpp", 32);
+ /* FIXME: PCI IRQ connections may be board specific */
+ for (i = 0; i < PCI_NUM_PINS; i++) {
+ s->pci[1].irq[i] = qdev_get_gpio_in_named(dev, "gpp", 12 + i);
+ }
+}
+
+static void mv64361_reset(DeviceState *dev)
+{
+ MV64361State *s = MV64361(dev);
+ int i, j;
+
+ /*
+ * These values may be board specific
+ * Real chip supports init from an eprom but that's not modelled
+ */
+ setup_mem_windows(s, 0x1fffff);
+ s->base_addr_enable = 0x1fffff;
+ s->cpu_conf = 0x28000ff;
+ s->regs_base = 0x100f100;
+ s->pci[0].io_base = 0x100f800;
+ s->pci[0].io_size = 0xff;
+ s->pci[0].mem_base[0] = 0x100c000;
+ s->pci[0].mem_size[0] = 0x1fff;
+ s->pci[0].mem_base[1] = 0x100f900;
+ s->pci[0].mem_size[1] = 0xff;
+ s->pci[0].mem_base[2] = 0x100f400;
+ s->pci[0].mem_size[2] = 0x1ff;
+ s->pci[0].mem_base[3] = 0x100f600;
+ s->pci[0].mem_size[3] = 0x1ff;
+ s->pci[1].io_base = 0x100fe00;
+ s->pci[1].io_size = 0xff;
+ s->pci[1].mem_base[0] = 0x1008000;
+ s->pci[1].mem_size[0] = 0x3fff;
+ s->pci[1].mem_base[1] = 0x100fd00;
+ s->pci[1].mem_size[1] = 0xff;
+ s->pci[1].mem_base[2] = 0x1002600;
+ s->pci[1].mem_size[2] = 0x1ff;
+ s->pci[1].mem_base[3] = 0x100ff80;
+ s->pci[1].mem_size[3] = 0x7f;
+ for (i = 0; i < 2; i++) {
+ for (j = 0; j < 4; j++) {
+ s->pci[i].remap[j] = s->pci[i].mem_base[j] << 16;
+ }
+ }
+ s->pci[0].remap[1] = 0;
+ s->pci[1].remap[1] = 0;
+ setup_mem_windows(s, 0xfbfff);
+ s->base_addr_enable = 0xfbfff;
+}
+
+static void mv64361_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = mv64361_realize;
+ dc->reset = mv64361_reset;
+}
+
+static const TypeInfo mv64361_type_info = {
+ .name = TYPE_MV64361,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(MV64361State),
+ .class_init = mv64361_class_init,
+};
+
+static void mv64361_register_types(void)
+{
+ type_register_static(&mv64361_type_info);
+}
+
+type_init(mv64361_register_types)
diff --git a/hw/pci-host/mv643xx.h b/hw/pci-host/mv643xx.h
new file mode 100644
index 0000000000..8750675971
--- /dev/null
+++ b/hw/pci-host/mv643xx.h
@@ -0,0 +1,919 @@
+/*
+ * mv643xx.h - MV-643XX Internal registers definition file.
+ *
+ * Copyright 2002 Momentum Computer, Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ * Copyright 2002 GALILEO TECHNOLOGY, LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_MV643XX_H
+#define __ASM_MV643XX_H
+
+/****************************************/
+/* Processor Address Space */
+/****************************************/
+
+/* DDR SDRAM BAR and size registers */
+
+#define MV64340_CS_0_BASE_ADDR 0x008
+#define MV64340_CS_0_SIZE 0x010
+#define MV64340_CS_1_BASE_ADDR 0x208
+#define MV64340_CS_1_SIZE 0x210
+#define MV64340_CS_2_BASE_ADDR 0x018
+#define MV64340_CS_2_SIZE 0x020
+#define MV64340_CS_3_BASE_ADDR 0x218
+#define MV64340_CS_3_SIZE 0x220
+
+/* Devices BAR and size registers */
+
+#define MV64340_DEV_CS0_BASE_ADDR 0x028
+#define MV64340_DEV_CS0_SIZE 0x030
+#define MV64340_DEV_CS1_BASE_ADDR 0x228
+#define MV64340_DEV_CS1_SIZE 0x230
+#define MV64340_DEV_CS2_BASE_ADDR 0x248
+#define MV64340_DEV_CS2_SIZE 0x250
+#define MV64340_DEV_CS3_BASE_ADDR 0x038
+#define MV64340_DEV_CS3_SIZE 0x040
+#define MV64340_BOOTCS_BASE_ADDR 0x238
+#define MV64340_BOOTCS_SIZE 0x240
+
+/* PCI 0 BAR and size registers */
+
+#define MV64340_PCI_0_IO_BASE_ADDR 0x048
+#define MV64340_PCI_0_IO_SIZE 0x050
+#define MV64340_PCI_0_MEMORY0_BASE_ADDR 0x058
+#define MV64340_PCI_0_MEMORY0_SIZE 0x060
+#define MV64340_PCI_0_MEMORY1_BASE_ADDR 0x080
+#define MV64340_PCI_0_MEMORY1_SIZE 0x088
+#define MV64340_PCI_0_MEMORY2_BASE_ADDR 0x258
+#define MV64340_PCI_0_MEMORY2_SIZE 0x260
+#define MV64340_PCI_0_MEMORY3_BASE_ADDR 0x280
+#define MV64340_PCI_0_MEMORY3_SIZE 0x288
+
+/* PCI 1 BAR and size registers */
+#define MV64340_PCI_1_IO_BASE_ADDR 0x090
+#define MV64340_PCI_1_IO_SIZE 0x098
+#define MV64340_PCI_1_MEMORY0_BASE_ADDR 0x0a0
+#define MV64340_PCI_1_MEMORY0_SIZE 0x0a8
+#define MV64340_PCI_1_MEMORY1_BASE_ADDR 0x0b0
+#define MV64340_PCI_1_MEMORY1_SIZE 0x0b8
+#define MV64340_PCI_1_MEMORY2_BASE_ADDR 0x2a0
+#define MV64340_PCI_1_MEMORY2_SIZE 0x2a8
+#define MV64340_PCI_1_MEMORY3_BASE_ADDR 0x2b0
+#define MV64340_PCI_1_MEMORY3_SIZE 0x2b8
+
+/* SRAM base address */
+#define MV64340_INTEGRATED_SRAM_BASE_ADDR 0x268
+
+/* internal registers space base address */
+#define MV64340_INTERNAL_SPACE_BASE_ADDR 0x068
+
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+ windows above */
+#define MV64340_BASE_ADDR_ENABLE 0x278
+
+/****************************************/
+/* PCI remap registers */
+/****************************************/
+ /* PCI 0 */
+#define MV64340_PCI_0_IO_ADDR_REMAP 0x0f0
+#define MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8
+#define MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320
+#define MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100
+#define MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328
+#define MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8
+#define MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330
+#define MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300
+#define MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338
+ /* PCI 1 */
+#define MV64340_PCI_1_IO_ADDR_REMAP 0x108
+#define MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110
+#define MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340
+#define MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118
+#define MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348
+#define MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310
+#define MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350
+#define MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318
+#define MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358
+
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0
+#define MV64340_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0
+#define MV64340_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8
+#define MV64340_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0
+#define MV64340_CPU_GE_HEADERS_RETARGET_BASE 0x3d8
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0
+#define MV64340_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8
+
+/****************************************/
+/* CPU Control Registers */
+/****************************************/
+
+#define MV64340_CPU_CONFIG 0x000
+#define MV64340_CPU_MODE 0x120
+#define MV64340_CPU_MASTER_CONTROL 0x160
+#define MV64340_CPU_CROSS_BAR_CONTROL_LOW 0x150
+#define MV64340_CPU_CROSS_BAR_CONTROL_HIGH 0x158
+#define MV64340_CPU_CROSS_BAR_TIMEOUT 0x168
+
+/****************************************/
+/* SMP RegisterS */
+/****************************************/
+
+#define MV64340_SMP_WHO_AM_I 0x200
+#define MV64340_SMP_CPU0_DOORBELL 0x214
+#define MV64340_SMP_CPU0_DOORBELL_CLEAR 0x21C
+#define MV64340_SMP_CPU1_DOORBELL 0x224
+#define MV64340_SMP_CPU1_DOORBELL_CLEAR 0x22C
+#define MV64340_SMP_CPU0_DOORBELL_MASK 0x234
+#define MV64340_SMP_CPU1_DOORBELL_MASK 0x23C
+#define MV64340_SMP_SEMAPHOR0 0x244
+#define MV64340_SMP_SEMAPHOR1 0x24c
+#define MV64340_SMP_SEMAPHOR2 0x254
+#define MV64340_SMP_SEMAPHOR3 0x25c
+#define MV64340_SMP_SEMAPHOR4 0x264
+#define MV64340_SMP_SEMAPHOR5 0x26c
+#define MV64340_SMP_SEMAPHOR6 0x274
+#define MV64340_SMP_SEMAPHOR7 0x27c
+
+/****************************************/
+/* CPU Sync Barrier Register */
+/****************************************/
+
+#define MV64340_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0
+#define MV64340_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8
+#define MV64340_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0
+#define MV64340_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8
+
+/****************************************/
+/* CPU Access Protect */
+/****************************************/
+
+#define MV64340_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180
+#define MV64340_CPU_PROTECT_WINDOW_0_SIZE 0x188
+#define MV64340_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190
+#define MV64340_CPU_PROTECT_WINDOW_1_SIZE 0x198
+#define MV64340_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0
+#define MV64340_CPU_PROTECT_WINDOW_2_SIZE 0x1a8
+#define MV64340_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0
+#define MV64340_CPU_PROTECT_WINDOW_3_SIZE 0x1b8
+
+
+/****************************************/
+/* CPU Error Report */
+/****************************************/
+
+#define MV64340_CPU_ERROR_ADDR_LOW 0x070
+#define MV64340_CPU_ERROR_ADDR_HIGH 0x078
+#define MV64340_CPU_ERROR_DATA_LOW 0x128
+#define MV64340_CPU_ERROR_DATA_HIGH 0x130
+#define MV64340_CPU_ERROR_PARITY 0x138
+#define MV64340_CPU_ERROR_CAUSE 0x140
+#define MV64340_CPU_ERROR_MASK 0x148
+
+/****************************************/
+/* CPU Interface Debug Registers */
+/****************************************/
+
+#define MV64340_PUNIT_SLAVE_DEBUG_LOW 0x360
+#define MV64340_PUNIT_SLAVE_DEBUG_HIGH 0x368
+#define MV64340_PUNIT_MASTER_DEBUG_LOW 0x370
+#define MV64340_PUNIT_MASTER_DEBUG_HIGH 0x378
+#define MV64340_PUNIT_MMASK 0x3e4
+
+/****************************************/
+/* Integrated SRAM Registers */
+/****************************************/
+
+#define MV64340_SRAM_CONFIG 0x380
+#define MV64340_SRAM_TEST_MODE 0X3F4
+#define MV64340_SRAM_ERROR_CAUSE 0x388
+#define MV64340_SRAM_ERROR_ADDR 0x390
+#define MV64340_SRAM_ERROR_ADDR_HIGH 0X3F8
+#define MV64340_SRAM_ERROR_DATA_LOW 0x398
+#define MV64340_SRAM_ERROR_DATA_HIGH 0x3a0
+#define MV64340_SRAM_ERROR_DATA_PARITY 0x3a8
+
+/****************************************/
+/* SDRAM Configuration */
+/****************************************/
+
+#define MV64340_SDRAM_CONFIG 0x1400
+#define MV64340_D_UNIT_CONTROL_LOW 0x1404
+#define MV64340_D_UNIT_CONTROL_HIGH 0x1424
+#define MV64340_SDRAM_TIMING_CONTROL_LOW 0x1408
+#define MV64340_SDRAM_TIMING_CONTROL_HIGH 0x140c
+#define MV64340_SDRAM_ADDR_CONTROL 0x1410
+#define MV64340_SDRAM_OPEN_PAGES_CONTROL 0x1414
+#define MV64340_SDRAM_OPERATION 0x1418
+#define MV64340_SDRAM_MODE 0x141c
+#define MV64340_EXTENDED_DRAM_MODE 0x1420
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430
+#define MV64340_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434
+#define MV64340_SDRAM_CROSS_BAR_TIMEOUT 0x1438
+#define MV64340_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0
+#define MV64340_SDRAM_DATA_PADS_CALIBRATION 0x14c4
+
+/****************************************/
+/* SDRAM Error Report */
+/****************************************/
+
+#define MV64340_SDRAM_ERROR_DATA_LOW 0x1444
+#define MV64340_SDRAM_ERROR_DATA_HIGH 0x1440
+#define MV64340_SDRAM_ERROR_ADDR 0x1450
+#define MV64340_SDRAM_RECEIVED_ECC 0x1448
+#define MV64340_SDRAM_CALCULATED_ECC 0x144c
+#define MV64340_SDRAM_ECC_CONTROL 0x1454
+#define MV64340_SDRAM_ECC_ERROR_COUNTER 0x1458
+
+/******************************************/
+/* Controlled Delay Line (CDL) Registers */
+/******************************************/
+
+#define MV64340_DFCDL_CONFIG0 0x1480
+#define MV64340_DFCDL_CONFIG1 0x1484
+#define MV64340_DLL_WRITE 0x1488
+#define MV64340_DLL_READ 0x148c
+#define MV64340_SRAM_ADDR 0x1490
+#define MV64340_SRAM_DATA0 0x1494
+#define MV64340_SRAM_DATA1 0x1498
+#define MV64340_SRAM_DATA2 0x149c
+#define MV64340_DFCL_PROBE 0x14a0
+
+/******************************************/
+/* Debug Registers */
+/******************************************/
+
+#define MV64340_DUNIT_DEBUG_LOW 0x1460
+#define MV64340_DUNIT_DEBUG_HIGH 0x1464
+#define MV64340_DUNIT_MMASK 0X1b40
+
+/****************************************/
+/* Device Parameters */
+/****************************************/
+
+#define MV64340_DEVICE_BANK0_PARAMETERS 0x45c
+#define MV64340_DEVICE_BANK1_PARAMETERS 0x460
+#define MV64340_DEVICE_BANK2_PARAMETERS 0x464
+#define MV64340_DEVICE_BANK3_PARAMETERS 0x468
+#define MV64340_DEVICE_BOOT_BANK_PARAMETERS 0x46c
+#define MV64340_DEVICE_INTERFACE_CONTROL 0x4c0
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc
+#define MV64340_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4
+
+/****************************************/
+/* Device interrupt registers */
+/****************************************/
+
+#define MV64340_DEVICE_INTERRUPT_CAUSE 0x4d0
+#define MV64340_DEVICE_INTERRUPT_MASK 0x4d4
+#define MV64340_DEVICE_ERROR_ADDR 0x4d8
+#define MV64340_DEVICE_ERROR_DATA 0x4dc
+#define MV64340_DEVICE_ERROR_PARITY 0x4e0
+
+/****************************************/
+/* Device debug registers */
+/****************************************/
+
+#define MV64340_DEVICE_DEBUG_LOW 0x4e4
+#define MV64340_DEVICE_DEBUG_HIGH 0x4e8
+#define MV64340_RUNIT_MMASK 0x4f0
+
+/****************************************/
+/* PCI Slave Address Decoding registers */
+/****************************************/
+
+#define MV64340_PCI_0_CS_0_BANK_SIZE 0xc08
+#define MV64340_PCI_1_CS_0_BANK_SIZE 0xc88
+#define MV64340_PCI_0_CS_1_BANK_SIZE 0xd08
+#define MV64340_PCI_1_CS_1_BANK_SIZE 0xd88
+#define MV64340_PCI_0_CS_2_BANK_SIZE 0xc0c
+#define MV64340_PCI_1_CS_2_BANK_SIZE 0xc8c
+#define MV64340_PCI_0_CS_3_BANK_SIZE 0xd0c
+#define MV64340_PCI_1_CS_3_BANK_SIZE 0xd8c
+#define MV64340_PCI_0_DEVCS_0_BANK_SIZE 0xc10
+#define MV64340_PCI_1_DEVCS_0_BANK_SIZE 0xc90
+#define MV64340_PCI_0_DEVCS_1_BANK_SIZE 0xd10
+#define MV64340_PCI_1_DEVCS_1_BANK_SIZE 0xd90
+#define MV64340_PCI_0_DEVCS_2_BANK_SIZE 0xd18
+#define MV64340_PCI_1_DEVCS_2_BANK_SIZE 0xd98
+#define MV64340_PCI_0_DEVCS_3_BANK_SIZE 0xc14
+#define MV64340_PCI_1_DEVCS_3_BANK_SIZE 0xc94
+#define MV64340_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14
+#define MV64340_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94
+#define MV64340_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c
+#define MV64340_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c
+#define MV64340_PCI_0_P2P_MEM1_BAR_SIZE 0xd20
+#define MV64340_PCI_1_P2P_MEM1_BAR_SIZE 0xda0
+#define MV64340_PCI_0_P2P_I_O_BAR_SIZE 0xd24
+#define MV64340_PCI_1_P2P_I_O_BAR_SIZE 0xda4
+#define MV64340_PCI_0_CPU_BAR_SIZE 0xd28
+#define MV64340_PCI_1_CPU_BAR_SIZE 0xda8
+#define MV64340_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00
+#define MV64340_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80
+#define MV64340_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c
+#define MV64340_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c
+#define MV64340_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c
+#define MV64340_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc
+#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48
+#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8
+#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48
+#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8
+#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c
+#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc
+#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c
+#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc
+#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04
+#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84
+#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08
+#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88
+#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C
+#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C
+#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10
+#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90
+#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50
+#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0
+#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50
+#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0
+#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58
+#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8
+#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54
+#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4
+#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54
+#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc
+#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60
+#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4
+#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68
+#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8
+#define MV64340_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c
+#define MV64340_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0
+#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74
+#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4
+#define MV64340_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00
+#define MV64340_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80
+#define MV64340_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38
+#define MV64340_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8
+#define MV64340_PCI_0_ADDR_DECODE_CONTROL 0xd3c
+#define MV64340_PCI_1_ADDR_DECODE_CONTROL 0xdbc
+#define MV64340_PCI_0_HEADERS_RETARGET_CONTROL 0xF40
+#define MV64340_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0
+#define MV64340_PCI_0_HEADERS_RETARGET_BASE 0xF44
+#define MV64340_PCI_1_HEADERS_RETARGET_BASE 0xFc4
+#define MV64340_PCI_0_HEADERS_RETARGET_HIGH 0xF48
+#define MV64340_PCI_1_HEADERS_RETARGET_HIGH 0xFc8
+
+/***********************************/
+/* PCI Control Register Map */
+/***********************************/
+
+#define MV64340_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20
+#define MV64340_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0
+#define MV64340_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C
+#define MV64340_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C
+#define MV64340_PCI_0_COMMAND 0xc00
+#define MV64340_PCI_1_COMMAND 0xc80
+#define MV64340_PCI_0_MODE 0xd00
+#define MV64340_PCI_1_MODE 0xd80
+#define MV64340_PCI_0_RETRY 0xc04
+#define MV64340_PCI_1_RETRY 0xc84
+#define MV64340_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04
+#define MV64340_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84
+#define MV64340_PCI_0_MSI_TRIGGER_TIMER 0xc38
+#define MV64340_PCI_1_MSI_TRIGGER_TIMER 0xcb8
+#define MV64340_PCI_0_ARBITER_CONTROL 0x1d00
+#define MV64340_PCI_1_ARBITER_CONTROL 0x1d80
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88
+#define MV64340_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c
+#define MV64340_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c
+#define MV64340_PCI_0_CROSS_BAR_TIMEOUT 0x1d04
+#define MV64340_PCI_1_CROSS_BAR_TIMEOUT 0x1d84
+#define MV64340_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18
+#define MV64340_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98
+#define MV64340_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10
+#define MV64340_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90
+#define MV64340_PCI_0_P2P_CONFIG 0x1d14
+#define MV64340_PCI_1_P2P_CONFIG 0x1d94
+
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50
+#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54
+#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58
+
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0
+#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
+#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8
+
+/****************************************/
+/* PCI Configuration Access Registers */
+/****************************************/
+
+#define MV64340_PCI_0_CONFIG_ADDR 0xcf8
+#define MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc
+#define MV64340_PCI_1_CONFIG_ADDR 0xc78
+#define MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c
+#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
+#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
+
+/****************************************/
+/* PCI Error Report Registers */
+/****************************************/
+
+#define MV64340_PCI_0_SERR_MASK 0xc28
+#define MV64340_PCI_1_SERR_MASK 0xca8
+#define MV64340_PCI_0_ERROR_ADDR_LOW 0x1d40
+#define MV64340_PCI_1_ERROR_ADDR_LOW 0x1dc0
+#define MV64340_PCI_0_ERROR_ADDR_HIGH 0x1d44
+#define MV64340_PCI_1_ERROR_ADDR_HIGH 0x1dc4
+#define MV64340_PCI_0_ERROR_ATTRIBUTE 0x1d48
+#define MV64340_PCI_1_ERROR_ATTRIBUTE 0x1dc8
+#define MV64340_PCI_0_ERROR_COMMAND 0x1d50
+#define MV64340_PCI_1_ERROR_COMMAND 0x1dd0
+#define MV64340_PCI_0_ERROR_CAUSE 0x1d58
+#define MV64340_PCI_1_ERROR_CAUSE 0x1dd8
+#define MV64340_PCI_0_ERROR_MASK 0x1d5c
+#define MV64340_PCI_1_ERROR_MASK 0x1ddc
+
+/****************************************/
+/* PCI Debug Registers */
+/****************************************/
+
+#define MV64340_PCI_0_MMASK 0X1D24
+#define MV64340_PCI_1_MMASK 0X1DA4
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers */
+/*********************************************/
+
+#define MV64340_PCI_DEVICE_AND_VENDOR_ID 0x000
+#define MV64340_PCI_STATUS_AND_COMMAND 0x004
+#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID 0x008
+#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
+
+#define MV64340_PCI_SCS_0_BASE_ADDR_LOW 0x010
+#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH 0x014
+#define MV64340_PCI_SCS_1_BASE_ADDR_LOW 0x018
+#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH 0x01C
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024
+#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c
+#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030
+#define MV64340_PCI_CAPABILTY_LIST_POINTER 0x034
+#define MV64340_PCI_INTERRUPT_PIN_AND_LINE 0x03C
+ /* capability list */
+#define MV64340_PCI_POWER_MANAGEMENT_CAPABILITY 0x040
+#define MV64340_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
+#define MV64340_PCI_VPD_ADDR 0x048
+#define MV64340_PCI_VPD_DATA 0x04c
+#define MV64340_PCI_MSI_MESSAGE_CONTROL 0x050
+#define MV64340_PCI_MSI_MESSAGE_ADDR 0x054
+#define MV64340_PCI_MSI_MESSAGE_UPPER_ADDR 0x058
+#define MV64340_PCI_MSI_MESSAGE_DATA 0x05c
+#define MV64340_PCI_X_COMMAND 0x060
+#define MV64340_PCI_X_STATUS 0x064
+#define MV64340_PCI_COMPACT_PCI_HOT_SWAP 0x068
+
+/***********************************************/
+/* PCI Configuration, Function 1, Registers */
+/***********************************************/
+
+#define MV64340_PCI_SCS_2_BASE_ADDR_LOW 0x110
+#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH 0x114
+#define MV64340_PCI_SCS_3_BASE_ADDR_LOW 0x118
+#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH 0x11c
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124
+
+/***********************************************/
+/* PCI Configuration, Function 2, Registers */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW 0x210
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW 0x218
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW 0x220
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 3, Registers */
+/***********************************************/
+
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW 0x310
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW 0x318
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c
+#define MV64340_PCI_CPU_BASE_ADDR_LOW 0x220
+#define MV64340_PCI_CPU_BASE_ADDR_HIGH 0x224
+
+/***********************************************/
+/* PCI Configuration, Function 4, Registers */
+/***********************************************/
+
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c
+#define MV64340_PCI_P2P_I_O_BASE_ADDR 0x420
+#define MV64340_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424
+
+/****************************************/
+/* Messaging Unit Registers (I20) */
+/****************************************/
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C
+
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC
+#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0
+#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4
+#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0
+#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4
+#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0
+#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4
+#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8
+#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC
+#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0
+#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4
+#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78
+#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C
+
+/****************************************/
+/* Ethernet Unit Registers */
+/****************************************/
+
+/*******************************************/
+/* CUNIT Registers */
+/*******************************************/
+
+ /* Address Decoding Register Map */
+
+#define MV64340_CUNIT_BASE_ADDR_REG0 0xf200
+#define MV64340_CUNIT_BASE_ADDR_REG1 0xf208
+#define MV64340_CUNIT_BASE_ADDR_REG2 0xf210
+#define MV64340_CUNIT_BASE_ADDR_REG3 0xf218
+#define MV64340_CUNIT_SIZE0 0xf204
+#define MV64340_CUNIT_SIZE1 0xf20c
+#define MV64340_CUNIT_SIZE2 0xf214
+#define MV64340_CUNIT_SIZE3 0xf21c
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240
+#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244
+#define MV64340_CUNIT_BASE_ADDR_ENABLE_REG 0xf250
+#define MV64340_MPSC0_ACCESS_PROTECTION_REG 0xf254
+#define MV64340_MPSC1_ACCESS_PROTECTION_REG 0xf258
+#define MV64340_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C
+
+ /* Error Report Registers */
+
+#define MV64340_CUNIT_INTERRUPT_CAUSE_REG 0xf310
+#define MV64340_CUNIT_INTERRUPT_MASK_REG 0xf314
+#define MV64340_CUNIT_ERROR_ADDR 0xf318
+
+ /* Cunit Control Registers */
+
+#define MV64340_CUNIT_ARBITER_CONTROL_REG 0xf300
+#define MV64340_CUNIT_CONFIG_REG 0xb40c
+#define MV64340_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304
+
+ /* Cunit Debug Registers */
+
+#define MV64340_CUNIT_DEBUG_LOW 0xf340
+#define MV64340_CUNIT_DEBUG_HIGH 0xf344
+#define MV64340_CUNIT_MMASK 0xf380
+
+ /* MPSCs Clocks Routing Registers */
+
+#define MV64340_MPSC_ROUTING_REG 0xb400
+#define MV64340_MPSC_RX_CLOCK_ROUTING_REG 0xb404
+#define MV64340_MPSC_TX_CLOCK_ROUTING_REG 0xb408
+
+ /* MPSCs Interrupts Registers */
+
+#define MV64340_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
+#define MV64340_MPSC_MASK_REG(port) (0xb884 + (port<<3))
+
+#define MV64340_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
+#define MV64340_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
+#define MV64340_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
+#define MV64340_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
+
+ /* MPSC0 Registers */
+
+
+/***************************************/
+/* SDMA Registers */
+/***************************************/
+
+#define MV64340_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
+#define MV64340_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
+#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
+#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
+#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
+
+#define MV64340_SDMA_CAUSE_REG 0xb800
+#define MV64340_SDMA_MASK_REG 0xb880
+
+/* BRG Interrupts */
+
+#define MV64340_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
+#define MV64340_BRG_BAUDE_TUNING_REG(brg) (0xb208 + (brg<<3))
+#define MV64340_BRG_CAUSE_REG 0xb834
+#define MV64340_BRG_MASK_REG 0xb8b4
+
+/****************************************/
+/* DMA Channel Control */
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_CONTROL 0x840
+#define MV64340_DMA_CHANNEL0_CONTROL_HIGH 0x880
+#define MV64340_DMA_CHANNEL1_CONTROL 0x844
+#define MV64340_DMA_CHANNEL1_CONTROL_HIGH 0x884
+#define MV64340_DMA_CHANNEL2_CONTROL 0x848
+#define MV64340_DMA_CHANNEL2_CONTROL_HIGH 0x888
+#define MV64340_DMA_CHANNEL3_CONTROL 0x84C
+#define MV64340_DMA_CHANNEL3_CONTROL_HIGH 0x88C
+
+
+/****************************************/
+/* IDMA Registers */
+/****************************************/
+
+#define MV64340_DMA_CHANNEL0_BYTE_COUNT 0x800
+#define MV64340_DMA_CHANNEL1_BYTE_COUNT 0x804
+#define MV64340_DMA_CHANNEL2_BYTE_COUNT 0x808
+#define MV64340_DMA_CHANNEL3_BYTE_COUNT 0x80C
+#define MV64340_DMA_CHANNEL0_SOURCE_ADDR 0x810
+#define MV64340_DMA_CHANNEL1_SOURCE_ADDR 0x814
+#define MV64340_DMA_CHANNEL2_SOURCE_ADDR 0x818
+#define MV64340_DMA_CHANNEL3_SOURCE_ADDR 0x81c
+#define MV64340_DMA_CHANNEL0_DESTINATION_ADDR 0x820
+#define MV64340_DMA_CHANNEL1_DESTINATION_ADDR 0x824
+#define MV64340_DMA_CHANNEL2_DESTINATION_ADDR 0x828
+#define MV64340_DMA_CHANNEL3_DESTINATION_ADDR 0x82C
+#define MV64340_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830
+#define MV64340_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834
+#define MV64340_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838
+#define MV64340_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C
+#define MV64340_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870
+#define MV64340_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874
+#define MV64340_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878
+#define MV64340_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C
+
+ /* IDMA Address Decoding Base Address Registers */
+
+#define MV64340_DMA_BASE_ADDR_REG0 0xa00
+#define MV64340_DMA_BASE_ADDR_REG1 0xa08
+#define MV64340_DMA_BASE_ADDR_REG2 0xa10
+#define MV64340_DMA_BASE_ADDR_REG3 0xa18
+#define MV64340_DMA_BASE_ADDR_REG4 0xa20
+#define MV64340_DMA_BASE_ADDR_REG5 0xa28
+#define MV64340_DMA_BASE_ADDR_REG6 0xa30
+#define MV64340_DMA_BASE_ADDR_REG7 0xa38
+
+ /* IDMA Address Decoding Size Address Register */
+
+#define MV64340_DMA_SIZE_REG0 0xa04
+#define MV64340_DMA_SIZE_REG1 0xa0c
+#define MV64340_DMA_SIZE_REG2 0xa14
+#define MV64340_DMA_SIZE_REG3 0xa1c
+#define MV64340_DMA_SIZE_REG4 0xa24
+#define MV64340_DMA_SIZE_REG5 0xa2c
+#define MV64340_DMA_SIZE_REG6 0xa34
+#define MV64340_DMA_SIZE_REG7 0xa3C
+
+ /* IDMA Address Decoding High Address Remap and Access
+ Protection Registers */
+
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG0 0xa60
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG1 0xa64
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG2 0xa68
+#define MV64340_DMA_HIGH_ADDR_REMAP_REG3 0xa6C
+#define MV64340_DMA_BASE_ADDR_ENABLE_REG 0xa80
+#define MV64340_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70
+#define MV64340_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74
+#define MV64340_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78
+#define MV64340_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c
+#define MV64340_DMA_ARBITER_CONTROL 0x860
+#define MV64340_DMA_CROSS_BAR_TIMEOUT 0x8d0
+
+ /* IDMA Headers Retarget Registers */
+
+#define MV64340_DMA_HEADERS_RETARGET_CONTROL 0xa84
+#define MV64340_DMA_HEADERS_RETARGET_BASE 0xa88
+
+ /* IDMA Interrupt Register */
+
+#define MV64340_DMA_INTERRUPT_CAUSE_REG 0x8c0
+#define MV64340_DMA_INTERRUPT_CAUSE_MASK 0x8c4
+#define MV64340_DMA_ERROR_ADDR 0x8c8
+#define MV64340_DMA_ERROR_SELECT 0x8cc
+
+ /* IDMA Debug Register ( for internal use ) */
+
+#define MV64340_DMA_DEBUG_LOW 0x8e0
+#define MV64340_DMA_DEBUG_HIGH 0x8e4
+#define MV64340_DMA_SPARE 0xA8C
+
+/****************************************/
+/* Timer_Counter */
+/****************************************/
+
+#define MV64340_TIMER_COUNTER0 0x850
+#define MV64340_TIMER_COUNTER1 0x854
+#define MV64340_TIMER_COUNTER2 0x858
+#define MV64340_TIMER_COUNTER3 0x85C
+#define MV64340_TIMER_COUNTER_0_3_CONTROL 0x864
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
+
+/****************************************/
+/* Watchdog registers */
+/****************************************/
+
+#define MV64340_WATCHDOG_CONFIG_REG 0xb410
+#define MV64340_WATCHDOG_VALUE_REG 0xb414
+
+/****************************************/
+/* I2C Registers */
+/****************************************/
+
+#define MV64XXX_I2C_OFFSET 0xc000
+#define MV64XXX_I2C_REG_BLOCK_SIZE 0x0020
+
+/****************************************/
+/* GPP Interface Registers */
+/****************************************/
+
+#define MV64340_GPP_IO_CONTROL 0xf100
+#define MV64340_GPP_LEVEL_CONTROL 0xf110
+#define MV64340_GPP_VALUE 0xf104
+#define MV64340_GPP_INTERRUPT_CAUSE 0xf108
+#define MV64340_GPP_INTERRUPT_MASK0 0xf10c
+#define MV64340_GPP_INTERRUPT_MASK1 0xf114
+#define MV64340_GPP_VALUE_SET 0xf118
+#define MV64340_GPP_VALUE_CLEAR 0xf11c
+
+/****************************************/
+/* Interrupt Controller Registers */
+/****************************************/
+
+/****************************************/
+/* Interrupts */
+/****************************************/
+
+#define MV64340_MAIN_INTERRUPT_CAUSE_LOW 0x004
+#define MV64340_MAIN_INTERRUPT_CAUSE_HIGH 0x00c
+#define MV64340_CPU_INTERRUPT0_MASK_LOW 0x014
+#define MV64340_CPU_INTERRUPT0_MASK_HIGH 0x01c
+#define MV64340_CPU_INTERRUPT0_SELECT_CAUSE 0x024
+#define MV64340_CPU_INTERRUPT1_MASK_LOW 0x034
+#define MV64340_CPU_INTERRUPT1_MASK_HIGH 0x03c
+#define MV64340_CPU_INTERRUPT1_SELECT_CAUSE 0x044
+#define MV64340_INTERRUPT0_MASK_0_LOW 0x054
+#define MV64340_INTERRUPT0_MASK_0_HIGH 0x05c
+#define MV64340_INTERRUPT0_SELECT_CAUSE 0x064
+#define MV64340_INTERRUPT1_MASK_0_LOW 0x074
+#define MV64340_INTERRUPT1_MASK_0_HIGH 0x07c
+#define MV64340_INTERRUPT1_SELECT_CAUSE 0x084
+
+/****************************************/
+/* MPP Interface Registers */
+/****************************************/
+
+#define MV64340_MPP_CONTROL0 0xf000
+#define MV64340_MPP_CONTROL1 0xf004
+#define MV64340_MPP_CONTROL2 0xf008
+#define MV64340_MPP_CONTROL3 0xf00c
+
+/****************************************/
+/* Serial Initialization registers */
+/****************************************/
+
+#define MV64340_SERIAL_INIT_LAST_DATA 0xf324
+#define MV64340_SERIAL_INIT_CONTROL 0xf328
+#define MV64340_SERIAL_INIT_STATUS 0xf32c
+
+#endif /* __ASM_MV643XX_H */
diff --git a/hw/pci-host/trace-events b/hw/pci-host/trace-events
index 7d8063ac42..dac86ad3f0 100644
--- a/hw/pci-host/trace-events
+++ b/hw/pci-host/trace-events
@@ -3,6 +3,12 @@
# grackle.c
grackle_set_irq(int irq_num, int level) "set_irq num %d level %d"
+# mv64361.c
+mv64361_region_map(const char *name, uint64_t poffs, uint64_t size, uint64_t moffs) "Mapping %s 0x%"PRIx64"+0x%"PRIx64" @ 0x%"PRIx64
+mv64361_region_enable(const char *op, int num) "Should %s region %d"
+mv64361_reg_read(uint64_t addr, uint32_t val) "0x%"PRIx64" -> 0x%x"
+mv64361_reg_write(uint64_t addr, uint64_t val) "0x%"PRIx64" <- 0x%"PRIx64
+
# sabre.c
sabre_set_request(int irq_num) "request irq %d"
sabre_clear_request(int irq_num) "clear request irq %d"
diff --git a/include/hw/pci-host/mv64361.h b/include/hw/pci-host/mv64361.h
new file mode 100644
index 0000000000..9cdb35cb3c
--- /dev/null
+++ b/include/hw/pci-host/mv64361.h
@@ -0,0 +1,8 @@
+#ifndef MV64361_H
+#define MV64361_H
+
+#define TYPE_MV64361 "mv64361"
+
+PCIBus *mv64361_get_pci_bus(DeviceState *dev, int n);
+
+#endif
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index ac0c23ebc7..5c14681b82 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -214,6 +214,7 @@
#define PCI_DEVICE_ID_VIA_8231_PM 0x8235
#define PCI_VENDOR_ID_MARVELL 0x11ab
+#define PCI_DEVICE_ID_MARVELL_MV6436X 0x6460
#define PCI_VENDOR_ID_SILICON_MOTION 0x126f
#define PCI_DEVICE_ID_SM501 0x0501
--
2.21.3
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/6] Pegasos2 emulation
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
` (5 preceding siblings ...)
2021-02-22 15:22 ` [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller BALATON Zoltan
@ 2021-02-22 16:19 ` no-reply
2021-02-23 4:42 ` David Gibson
7 siblings, 0 replies; 19+ messages in thread
From: no-reply @ 2021-02-22 16:19 UTC (permalink / raw)
To: balaton; +Cc: peter.maydell, f4bug, qemu-devel, qemu-ppc, pbonzini, david
Patchew URL: https://patchew.org/QEMU/cover.1614007326.git.balaton@eik.bme.hu/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: cover.1614007326.git.balaton@eik.bme.hu
Subject: [PATCH v3 0/6] Pegasos2 emulation
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/cover.1614007326.git.balaton@eik.bme.hu -> patchew/cover.1614007326.git.balaton@eik.bme.hu
Switched to a new branch 'test'
e772798 hw/ppc: Add emulation of Genesi/bPlan Pegasos II
6b4a578 hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
efe3bd4 vt82c686: Add emulation of VT8231 south bridge
780d845 vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO
b3a7a72 vt82c686: QOM-ify superio related functionality
d2a5c34 vt82c686: Implement control of serial port io ranges via config regs
=== OUTPUT BEGIN ===
1/6 Checking commit d2a5c343f3e4 (vt82c686: Implement control of serial port io ranges via config regs)
2/6 Checking commit b3a7a7270faf (vt82c686: QOM-ify superio related functionality)
3/6 Checking commit 780d84539225 (vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO)
4/6 Checking commit efe3bd4d7951 (vt82c686: Add emulation of VT8231 south bridge)
5/6 Checking commit 6b4a578c2867 (hw/pci-host: Add emulation of Marvell MV64361 PPC system controller)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#51:
new file mode 100644
WARNING: line over 80 characters
#307: FILE: hw/pci-host/mv64361.c:252:
+ trace_mv64361_region_enable(!(val & mask) ? "enable" : "disable", i);
ERROR: code indent should never use tabs
#1032: FILE: hw/pci-host/mv643xx.h:5:
+ * ^IAuthor: Matthew Dharm <mdharm@momenco.com>$
WARNING: architecture specific defines should be avoided
#1040: FILE: hw/pci-host/mv643xx.h:13:
+#ifndef __ASM_MV643XX_H
WARNING: Block comments use a leading /* on a separate line
#1102: FILE: hw/pci-host/mv643xx.h:75:
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
WARNING: Block comments use * on subsequent lines
#1103: FILE: hw/pci-host/mv643xx.h:76:
+/* Enables the CS , DEV_CS , PCI 0 and PCI 1
+ windows above */
WARNING: Block comments use a trailing */ on a separate line
#1103: FILE: hw/pci-host/mv643xx.h:76:
+ windows above */
ERROR: code indent should never use tabs
#1206: FILE: hw/pci-host/mv643xx.h:179:
+/* CPU Interface Debug Registers ^I*/$
ERROR: code indent should never use tabs
#1283: FILE: hw/pci-host/mv643xx.h:256:
+/* Device Parameters^I^I^I*/$
ERROR: code indent should never use tabs
#1286: FILE: hw/pci-host/mv643xx.h:259:
+#define MV64340_DEVICE_BANK0_PARAMETERS^I^I^I^I 0x45c$
ERROR: code indent should never use tabs
#1287: FILE: hw/pci-host/mv643xx.h:260:
+#define MV64340_DEVICE_BANK1_PARAMETERS^I^I^I^I 0x460$
ERROR: code indent should never use tabs
#1288: FILE: hw/pci-host/mv643xx.h:261:
+#define MV64340_DEVICE_BANK2_PARAMETERS^I^I^I^I 0x464$
ERROR: code indent should never use tabs
#1289: FILE: hw/pci-host/mv643xx.h:262:
+#define MV64340_DEVICE_BANK3_PARAMETERS^I^I^I^I 0x468$
ERROR: code indent should never use tabs
#1290: FILE: hw/pci-host/mv643xx.h:263:
+#define MV64340_DEVICE_BOOT_BANK_PARAMETERS^I^I^I 0x46c$
ERROR: code indent should never use tabs
#1297: FILE: hw/pci-host/mv643xx.h:270:
+/* Device interrupt registers^I^I*/$
ERROR: code indent should never use tabs
#1300: FILE: hw/pci-host/mv643xx.h:273:
+#define MV64340_DEVICE_INTERRUPT_CAUSE^I^I^I^I 0x4d0$
ERROR: code indent should never use tabs
#1301: FILE: hw/pci-host/mv643xx.h:274:
+#define MV64340_DEVICE_INTERRUPT_MASK^I^I^I^I 0x4d4$
ERROR: code indent should never use tabs
#1302: FILE: hw/pci-host/mv643xx.h:275:
+#define MV64340_DEVICE_ERROR_ADDR^I^I^I^I 0x4d8$
ERROR: code indent should never use tabs
#1303: FILE: hw/pci-host/mv643xx.h:276:
+#define MV64340_DEVICE_ERROR_DATA ^I^I^I^I 0x4dc$
ERROR: code indent should never use tabs
#1304: FILE: hw/pci-host/mv643xx.h:277:
+#define MV64340_DEVICE_ERROR_PARITY ^I^I^I 0x4e0$
ERROR: code indent should never use tabs
#1307: FILE: hw/pci-host/mv643xx.h:280:
+/* Device debug registers ^I^I*/$
ERROR: code indent should never use tabs
#1310: FILE: hw/pci-host/mv643xx.h:283:
+#define MV64340_DEVICE_DEBUG_LOW ^I^I^I^I 0x4e4$
ERROR: code indent should never use tabs
#1311: FILE: hw/pci-host/mv643xx.h:284:
+#define MV64340_DEVICE_DEBUG_HIGH ^I^I^I^I 0x4e8$
ERROR: code indent should never use tabs
#1350: FILE: hw/pci-host/mv643xx.h:323:
+#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP^I^I^I 0xc48$
ERROR: code indent should never use tabs
#1351: FILE: hw/pci-host/mv643xx.h:324:
+#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP^I^I^I 0xcc8$
ERROR: code indent should never use tabs
#1352: FILE: hw/pci-host/mv643xx.h:325:
+#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP^I^I^I 0xd48$
ERROR: code indent should never use tabs
#1353: FILE: hw/pci-host/mv643xx.h:326:
+#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP^I^I^I 0xdc8$
ERROR: code indent should never use tabs
#1354: FILE: hw/pci-host/mv643xx.h:327:
+#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP^I^I^I 0xc4c$
ERROR: code indent should never use tabs
#1355: FILE: hw/pci-host/mv643xx.h:328:
+#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP^I^I^I 0xccc$
ERROR: code indent should never use tabs
#1356: FILE: hw/pci-host/mv643xx.h:329:
+#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP^I^I^I 0xd4c$
ERROR: code indent should never use tabs
#1357: FILE: hw/pci-host/mv643xx.h:330:
+#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP^I^I^I 0xdcc$
ERROR: code indent should never use tabs
#1358: FILE: hw/pci-host/mv643xx.h:331:
+#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP^I^I^I 0xF04$
ERROR: code indent should never use tabs
#1359: FILE: hw/pci-host/mv643xx.h:332:
+#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP^I^I^I 0xF84$
ERROR: code indent should never use tabs
#1360: FILE: hw/pci-host/mv643xx.h:333:
+#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP^I^I^I 0xF08$
ERROR: code indent should never use tabs
#1361: FILE: hw/pci-host/mv643xx.h:334:
+#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP^I^I^I 0xF88$
ERROR: code indent should never use tabs
#1362: FILE: hw/pci-host/mv643xx.h:335:
+#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP^I^I^I 0xF0C$
ERROR: code indent should never use tabs
#1363: FILE: hw/pci-host/mv643xx.h:336:
+#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP^I^I^I 0xF8C$
ERROR: code indent should never use tabs
#1364: FILE: hw/pci-host/mv643xx.h:337:
+#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP^I^I^I 0xF10$
ERROR: code indent should never use tabs
#1365: FILE: hw/pci-host/mv643xx.h:338:
+#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP^I^I^I 0xF90$
ERROR: code indent should never use tabs
#1366: FILE: hw/pci-host/mv643xx.h:339:
+#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP^I^I^I 0xc50$
ERROR: code indent should never use tabs
#1367: FILE: hw/pci-host/mv643xx.h:340:
+#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP^I^I^I 0xcd0$
ERROR: code indent should never use tabs
#1368: FILE: hw/pci-host/mv643xx.h:341:
+#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP^I^I^I 0xd50$
ERROR: code indent should never use tabs
#1369: FILE: hw/pci-host/mv643xx.h:342:
+#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP^I^I^I 0xdd0$
ERROR: code indent should never use tabs
#1370: FILE: hw/pci-host/mv643xx.h:343:
+#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP^I^I^I 0xd58$
ERROR: code indent should never use tabs
#1371: FILE: hw/pci-host/mv643xx.h:344:
+#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP^I^I^I 0xdd8$
ERROR: code indent should never use tabs
#1372: FILE: hw/pci-host/mv643xx.h:345:
+#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP ^I 0xc54$
ERROR: code indent should never use tabs
#1373: FILE: hw/pci-host/mv643xx.h:346:
+#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP ^I 0xcd4$
ERROR: code indent should never use tabs
#1374: FILE: hw/pci-host/mv643xx.h:347:
+#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP ^I 0xd54$
ERROR: code indent should never use tabs
#1375: FILE: hw/pci-host/mv643xx.h:348:
+#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP ^I 0xdd4$
ERROR: code indent should never use tabs
#1411: FILE: hw/pci-host/mv643xx.h:384:
+#define MV64340_PCI_0_COMMAND^I^I^I ^I 0xc00$
ERROR: code indent should never use tabs
#1412: FILE: hw/pci-host/mv643xx.h:385:
+#define MV64340_PCI_1_COMMAND^I^I^I^I^I 0xc80$
ERROR: code indent should never use tabs
#1415: FILE: hw/pci-host/mv643xx.h:388:
+#define MV64340_PCI_0_RETRY^I ^I ^I^I 0xc04$
ERROR: code indent should never use tabs
#1416: FILE: hw/pci-host/mv643xx.h:389:
+#define MV64340_PCI_1_RETRY^I^I^I^I 0xc84$
ERROR: code indent should never use tabs
#1478: FILE: hw/pci-host/mv643xx.h:451:
+#define MV64340_PCI_0_CONFIG_ADDR ^I^I^I^I 0xcf8$
ERROR: code indent should never use tabs
#1480: FILE: hw/pci-host/mv643xx.h:453:
+#define MV64340_PCI_1_CONFIG_ADDR ^I^I^I^I 0xc78$
ERROR: code indent should never use tabs
#1482: FILE: hw/pci-host/mv643xx.h:455:
+#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG^I 0xc34$
ERROR: code indent should never use tabs
#1483: FILE: hw/pci-host/mv643xx.h:456:
+#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG^I 0xcb4$
ERROR: code indent should never use tabs
#1489: FILE: hw/pci-host/mv643xx.h:462:
+#define MV64340_PCI_0_SERR_MASK^I^I^I^I^I 0xc28$
ERROR: code indent should never use tabs
#1490: FILE: hw/pci-host/mv643xx.h:463:
+#define MV64340_PCI_1_SERR_MASK^I^I^I^I^I 0xca8$
ERROR: code indent should never use tabs
#1515: FILE: hw/pci-host/mv643xx.h:488:
+#define MV64340_PCI_DEVICE_AND_VENDOR_ID ^I^I^I 0x000$
ERROR: code indent should never use tabs
#1516: FILE: hw/pci-host/mv643xx.h:489:
+#define MV64340_PCI_STATUS_AND_COMMAND^I^I^I^I 0x004$
ERROR: code indent should never use tabs
#1517: FILE: hw/pci-host/mv643xx.h:490:
+#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID^I^I^I 0x008$
ERROR: code indent should never use tabs
#1518: FILE: hw/pci-host/mv643xx.h:491:
+#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE ^I 0x00C$
ERROR: code indent should never use tabs
#1520: FILE: hw/pci-host/mv643xx.h:493:
+#define MV64340_PCI_SCS_0_BASE_ADDR_LOW ^I ^I^I 0x010$
ERROR: code indent should never use tabs
#1521: FILE: hw/pci-host/mv643xx.h:494:
+#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH ^I^I 0x014$
ERROR: code indent should never use tabs
#1522: FILE: hw/pci-host/mv643xx.h:495:
+#define MV64340_PCI_SCS_1_BASE_ADDR_LOW ^I ^I 0x018$
ERROR: code indent should never use tabs
#1523: FILE: hw/pci-host/mv643xx.h:496:
+#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH ^I^I 0x01C$
ERROR: code indent should never use tabs
#1524: FILE: hw/pci-host/mv643xx.h:497:
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW ^I 0x020$
ERROR: code indent should never use tabs
#1525: FILE: hw/pci-host/mv643xx.h:498:
+#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH ^I 0x024$
ERROR: code indent should never use tabs
#1526: FILE: hw/pci-host/mv643xx.h:499:
+#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID^I 0x02c$
ERROR: code indent should never use tabs
#1527: FILE: hw/pci-host/mv643xx.h:500:
+#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG^I 0x030$
ERROR: code indent should never use tabs
#1529: FILE: hw/pci-host/mv643xx.h:502:
+#define MV64340_PCI_INTERRUPT_PIN_AND_LINE ^I^I^I 0x03C$
ERROR: code indent should never use tabs
#1547: FILE: hw/pci-host/mv643xx.h:520:
+#define MV64340_PCI_SCS_2_BASE_ADDR_LOW ^I^I^I 0x110$
ERROR: code indent should never use tabs
#1548: FILE: hw/pci-host/mv643xx.h:521:
+#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH^I^I^I 0x114$
ERROR: code indent should never use tabs
#1549: FILE: hw/pci-host/mv643xx.h:522:
+#define MV64340_PCI_SCS_3_BASE_ADDR_LOW ^I^I^I 0x118$
ERROR: code indent should never use tabs
#1550: FILE: hw/pci-host/mv643xx.h:523:
+#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH^I^I^I 0x11c$
ERROR: code indent should never use tabs
#1551: FILE: hw/pci-host/mv643xx.h:524:
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW ^I 0x120$
ERROR: code indent should never use tabs
#1552: FILE: hw/pci-host/mv643xx.h:525:
+#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH ^I 0x124$
ERROR: code indent should never use tabs
#1558: FILE: hw/pci-host/mv643xx.h:531:
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW^I ^I^I 0x210$
ERROR: code indent should never use tabs
#1559: FILE: hw/pci-host/mv643xx.h:532:
+#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH ^I^I^I 0x214$
ERROR: code indent should never use tabs
#1560: FILE: hw/pci-host/mv643xx.h:533:
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW ^I^I^I 0x218$
ERROR: code indent should never use tabs
#1561: FILE: hw/pci-host/mv643xx.h:534:
+#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH ^I^I 0x21c$
ERROR: code indent should never use tabs
#1562: FILE: hw/pci-host/mv643xx.h:535:
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW ^I^I^I 0x220$
ERROR: code indent should never use tabs
#1563: FILE: hw/pci-host/mv643xx.h:536:
+#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH ^I^I 0x224$
ERROR: code indent should never use tabs
#1569: FILE: hw/pci-host/mv643xx.h:542:
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW^I ^I^I 0x310$
ERROR: code indent should never use tabs
#1570: FILE: hw/pci-host/mv643xx.h:543:
+#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH ^I^I^I 0x314$
ERROR: code indent should never use tabs
#1571: FILE: hw/pci-host/mv643xx.h:544:
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW^I^I^I 0x318$
ERROR: code indent should never use tabs
#1572: FILE: hw/pci-host/mv643xx.h:545:
+#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH ^I^I 0x31c$
ERROR: code indent should never use tabs
#1573: FILE: hw/pci-host/mv643xx.h:546:
+#define MV64340_PCI_CPU_BASE_ADDR_LOW ^I^I^I^I 0x220$
ERROR: code indent should never use tabs
#1574: FILE: hw/pci-host/mv643xx.h:547:
+#define MV64340_PCI_CPU_BASE_ADDR_HIGH ^I^I^I 0x224$
ERROR: code indent should never use tabs
#1580: FILE: hw/pci-host/mv643xx.h:553:
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW ^I^I^I 0x410$
ERROR: code indent should never use tabs
#1581: FILE: hw/pci-host/mv643xx.h:554:
+#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH ^I^I^I 0x414$
ERROR: code indent should never use tabs
#1582: FILE: hw/pci-host/mv643xx.h:555:
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW ^I^I^I 0x418$
ERROR: code indent should never use tabs
#1583: FILE: hw/pci-host/mv643xx.h:556:
+#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH ^I^I^I 0x41c$
ERROR: code indent should never use tabs
#1584: FILE: hw/pci-host/mv643xx.h:557:
+#define MV64340_PCI_P2P_I_O_BASE_ADDR ^I 0x420$
ERROR: code indent should never use tabs
#1588: FILE: hw/pci-host/mv643xx.h:561:
+/* Messaging Unit Registers (I20) ^I*/$
ERROR: code indent should never use tabs
#1591: FILE: hw/pci-host/mv643xx.h:564:
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE^I^I 0x010$
ERROR: code indent should never use tabs
#1592: FILE: hw/pci-host/mv643xx.h:565:
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE ^I^I 0x014$
ERROR: code indent should never use tabs
#1593: FILE: hw/pci-host/mv643xx.h:566:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE ^I^I 0x018$
ERROR: code indent should never use tabs
#1594: FILE: hw/pci-host/mv643xx.h:567:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE ^I^I 0x01C$
ERROR: code indent should never use tabs
#1595: FILE: hw/pci-host/mv643xx.h:568:
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE ^I^I 0x020$
ERROR: code indent should never use tabs
#1597: FILE: hw/pci-host/mv643xx.h:570:
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE^I 0x028$
ERROR: code indent should never use tabs
#1598: FILE: hw/pci-host/mv643xx.h:571:
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE ^I^I 0x02C$
ERROR: code indent should never use tabs
#1603: FILE: hw/pci-host/mv643xx.h:576:
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE ^I^I 0x050$
ERROR: code indent should never use tabs
#1604: FILE: hw/pci-host/mv643xx.h:577:
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE ^I^I 0x054$
ERROR: code indent should never use tabs
#1614: FILE: hw/pci-host/mv643xx.h:587:
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE^I^I 0x090$
ERROR: code indent should never use tabs
#1615: FILE: hw/pci-host/mv643xx.h:588:
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE ^I^I 0x094$
ERROR: code indent should never use tabs
#1616: FILE: hw/pci-host/mv643xx.h:589:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE ^I^I 0x098$
ERROR: code indent should never use tabs
#1617: FILE: hw/pci-host/mv643xx.h:590:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE ^I^I 0x09C$
ERROR: code indent should never use tabs
#1618: FILE: hw/pci-host/mv643xx.h:591:
+#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE ^I^I 0x0A0$
ERROR: code indent should never use tabs
#1620: FILE: hw/pci-host/mv643xx.h:593:
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE^I 0x0A8$
ERROR: code indent should never use tabs
#1621: FILE: hw/pci-host/mv643xx.h:594:
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE ^I^I 0x0AC$
ERROR: code indent should never use tabs
#1626: FILE: hw/pci-host/mv643xx.h:599:
+#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE ^I^I 0x0D0$
ERROR: code indent should never use tabs
#1627: FILE: hw/pci-host/mv643xx.h:600:
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE ^I^I 0x0D4$
ERROR: code indent should never use tabs
#1637: FILE: hw/pci-host/mv643xx.h:610:
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE^I^I 0x1C10$
ERROR: code indent should never use tabs
#1638: FILE: hw/pci-host/mv643xx.h:611:
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE ^I^I 0x1C14$
ERROR: code indent should never use tabs
#1639: FILE: hw/pci-host/mv643xx.h:612:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE ^I^I 0x1C18$
ERROR: code indent should never use tabs
#1640: FILE: hw/pci-host/mv643xx.h:613:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE ^I^I 0x1C1C$
ERROR: code indent should never use tabs
#1641: FILE: hw/pci-host/mv643xx.h:614:
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE ^I^I 0x1C20$
ERROR: code indent should never use tabs
#1642: FILE: hw/pci-host/mv643xx.h:615:
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE ^I 0x1C24$
ERROR: code indent should never use tabs
#1643: FILE: hw/pci-host/mv643xx.h:616:
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE^I 0x1C28$
ERROR: code indent should never use tabs
#1644: FILE: hw/pci-host/mv643xx.h:617:
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE ^I^I 0x1C2C$
ERROR: code indent should never use tabs
#1649: FILE: hw/pci-host/mv643xx.h:622:
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE ^I^I 0x1C50$
ERROR: code indent should never use tabs
#1650: FILE: hw/pci-host/mv643xx.h:623:
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE ^I^I 0x1C54$
ERROR: code indent should never use tabs
#1659: FILE: hw/pci-host/mv643xx.h:632:
+#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE^I^I 0x1C90$
ERROR: code indent should never use tabs
#1660: FILE: hw/pci-host/mv643xx.h:633:
+#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE ^I^I 0x1C94$
ERROR: code indent should never use tabs
#1661: FILE: hw/pci-host/mv643xx.h:634:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE ^I^I 0x1C98$
ERROR: code indent should never use tabs
#1662: FILE: hw/pci-host/mv643xx.h:635:
+#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE ^I^I 0x1C9C$
ERROR: code indent should never use tabs
#1663: FILE: hw/pci-host/mv643xx.h:636:
+#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE ^I^I 0x1CA0$
ERROR: code indent should never use tabs
#1664: FILE: hw/pci-host/mv643xx.h:637:
+#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE ^I 0x1CA4$
ERROR: code indent should never use tabs
#1665: FILE: hw/pci-host/mv643xx.h:638:
+#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE^I 0x1CA8$
ERROR: code indent should never use tabs
#1666: FILE: hw/pci-host/mv643xx.h:639:
+#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE ^I^I 0x1CAC$
ERROR: code indent should never use tabs
#1671: FILE: hw/pci-host/mv643xx.h:644:
+#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE ^I^I 0x1CD0$
ERROR: code indent should never use tabs
#1672: FILE: hw/pci-host/mv643xx.h:645:
+#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE ^I^I 0x1CD4$
ERROR: code indent should never use tabs
#1683: FILE: hw/pci-host/mv643xx.h:656:
+/* Ethernet Unit Registers ^I^I*/$
WARNING: line over 80 characters
#1733: FILE: hw/pci-host/mv643xx.h:706:
+#define MV64340_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
ERROR: spaces required around that '<<' (ctx:VxV)
#1733: FILE: hw/pci-host/mv643xx.h:706:
+#define MV64340_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
^
WARNING: line over 80 characters
#1734: FILE: hw/pci-host/mv643xx.h:707:
+#define MV64340_MPSC_MASK_REG(port) (0xb884 + (port<<3))
ERROR: spaces required around that '<<' (ctx:VxV)
#1734: FILE: hw/pci-host/mv643xx.h:707:
+#define MV64340_MPSC_MASK_REG(port) (0xb884 + (port<<3))
^
WARNING: line over 80 characters
#1736: FILE: hw/pci-host/mv643xx.h:709:
+#define MV64340_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1736: FILE: hw/pci-host/mv643xx.h:709:
+#define MV64340_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
^
WARNING: line over 80 characters
#1737: FILE: hw/pci-host/mv643xx.h:710:
+#define MV64340_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1737: FILE: hw/pci-host/mv643xx.h:710:
+#define MV64340_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
^
WARNING: line over 80 characters
#1738: FILE: hw/pci-host/mv643xx.h:711:
+#define MV64340_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1738: FILE: hw/pci-host/mv643xx.h:711:
+#define MV64340_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
^
WARNING: line over 80 characters
#1739: FILE: hw/pci-host/mv643xx.h:712:
+#define MV64340_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1739: FILE: hw/pci-host/mv643xx.h:712:
+#define MV64340_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
^
WARNING: line over 80 characters
#1740: FILE: hw/pci-host/mv643xx.h:713:
+#define MV64340_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1740: FILE: hw/pci-host/mv643xx.h:713:
+#define MV64340_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
^
WARNING: line over 80 characters
#1741: FILE: hw/pci-host/mv643xx.h:714:
+#define MV64340_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1741: FILE: hw/pci-host/mv643xx.h:714:
+#define MV64340_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
^
WARNING: line over 80 characters
#1742: FILE: hw/pci-host/mv643xx.h:715:
+#define MV64340_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1742: FILE: hw/pci-host/mv643xx.h:715:
+#define MV64340_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
^
WARNING: line over 80 characters
#1743: FILE: hw/pci-host/mv643xx.h:716:
+#define MV64340_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1743: FILE: hw/pci-host/mv643xx.h:716:
+#define MV64340_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
^
WARNING: line over 80 characters
#1744: FILE: hw/pci-host/mv643xx.h:717:
+#define MV64340_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1744: FILE: hw/pci-host/mv643xx.h:717:
+#define MV64340_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
^
WARNING: line over 80 characters
#1745: FILE: hw/pci-host/mv643xx.h:718:
+#define MV64340_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1745: FILE: hw/pci-host/mv643xx.h:718:
+#define MV64340_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
^
WARNING: line over 80 characters
#1746: FILE: hw/pci-host/mv643xx.h:719:
+#define MV64340_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1746: FILE: hw/pci-host/mv643xx.h:719:
+#define MV64340_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
^
WARNING: line over 80 characters
#1747: FILE: hw/pci-host/mv643xx.h:720:
+#define MV64340_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1747: FILE: hw/pci-host/mv643xx.h:720:
+#define MV64340_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
^
WARNING: line over 80 characters
#1748: FILE: hw/pci-host/mv643xx.h:721:
+#define MV64340_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
ERROR: spaces required around that '<<' (ctx:VxV)
#1748: FILE: hw/pci-host/mv643xx.h:721:
+#define MV64340_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
^
WARNING: line over 80 characters
#1757: FILE: hw/pci-host/mv643xx.h:730:
+#define MV64340_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
ERROR: spaces required around that '<<' (ctx:VxV)
#1757: FILE: hw/pci-host/mv643xx.h:730:
+#define MV64340_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
^
WARNING: line over 80 characters
#1758: FILE: hw/pci-host/mv643xx.h:731:
+#define MV64340_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
ERROR: spaces required around that '<<' (ctx:VxV)
#1758: FILE: hw/pci-host/mv643xx.h:731:
+#define MV64340_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
^
WARNING: line over 80 characters
#1759: FILE: hw/pci-host/mv643xx.h:732:
+#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
ERROR: spaces required around that '<<' (ctx:VxV)
#1759: FILE: hw/pci-host/mv643xx.h:732:
+#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
^
WARNING: line over 80 characters
#1760: FILE: hw/pci-host/mv643xx.h:733:
+#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
ERROR: spaces required around that '<<' (ctx:VxV)
#1760: FILE: hw/pci-host/mv643xx.h:733:
+#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
^
WARNING: line over 80 characters
#1761: FILE: hw/pci-host/mv643xx.h:734:
+#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
ERROR: spaces required around that '<<' (ctx:VxV)
#1761: FILE: hw/pci-host/mv643xx.h:734:
+#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
^
WARNING: line over 80 characters
#1768: FILE: hw/pci-host/mv643xx.h:741:
+#define MV64340_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
ERROR: spaces required around that '<<' (ctx:VxV)
#1768: FILE: hw/pci-host/mv643xx.h:741:
+#define MV64340_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
^
WARNING: line over 80 characters
#1769: FILE: hw/pci-host/mv643xx.h:742:
+#define MV64340_BRG_BAUDE_TUNING_REG(brg) (0xb208 + (brg<<3))
ERROR: spaces required around that '<<' (ctx:VxV)
#1769: FILE: hw/pci-host/mv643xx.h:742:
+#define MV64340_BRG_BAUDE_TUNING_REG(brg) (0xb208 + (brg<<3))
^
ERROR: code indent should never use tabs
#1774: FILE: hw/pci-host/mv643xx.h:747:
+/* DMA Channel Control^I^I^I*/$
ERROR: code indent should never use tabs
#1777: FILE: hw/pci-host/mv643xx.h:750:
+#define MV64340_DMA_CHANNEL0_CONTROL ^I^I^I^I 0x840$
ERROR: code indent should never use tabs
#1778: FILE: hw/pci-host/mv643xx.h:751:
+#define MV64340_DMA_CHANNEL0_CONTROL_HIGH^I^I^I 0x880$
ERROR: code indent should never use tabs
#1779: FILE: hw/pci-host/mv643xx.h:752:
+#define MV64340_DMA_CHANNEL1_CONTROL ^I^I^I^I 0x844$
ERROR: code indent should never use tabs
#1780: FILE: hw/pci-host/mv643xx.h:753:
+#define MV64340_DMA_CHANNEL1_CONTROL_HIGH^I^I^I 0x884$
ERROR: code indent should never use tabs
#1781: FILE: hw/pci-host/mv643xx.h:754:
+#define MV64340_DMA_CHANNEL2_CONTROL ^I^I^I^I 0x848$
ERROR: code indent should never use tabs
#1782: FILE: hw/pci-host/mv643xx.h:755:
+#define MV64340_DMA_CHANNEL2_CONTROL_HIGH^I^I^I 0x888$
ERROR: code indent should never use tabs
#1783: FILE: hw/pci-host/mv643xx.h:756:
+#define MV64340_DMA_CHANNEL3_CONTROL ^I^I^I^I 0x84C$
ERROR: code indent should never use tabs
#1784: FILE: hw/pci-host/mv643xx.h:757:
+#define MV64340_DMA_CHANNEL3_CONTROL_HIGH^I^I^I 0x88C$
WARNING: Block comments use a leading /* on a separate line
#1834: FILE: hw/pci-host/mv643xx.h:807:
+ /* IDMA Address Decoding High Address Remap and Access
WARNING: Block comments use * on subsequent lines
#1835: FILE: hw/pci-host/mv643xx.h:808:
+ /* IDMA Address Decoding High Address Remap and Access
+ Protection Registers */
WARNING: Block comments use a trailing */ on a separate line
#1835: FILE: hw/pci-host/mv643xx.h:808:
+ Protection Registers */
ERROR: code indent should never use tabs
#1868: FILE: hw/pci-host/mv643xx.h:841:
+/* Timer_Counter ^I^I^I*/$
ERROR: code indent should never use tabs
#1871: FILE: hw/pci-host/mv643xx.h:844:
+#define MV64340_TIMER_COUNTER0^I^I^I^I^I 0x850$
ERROR: code indent should never use tabs
#1872: FILE: hw/pci-host/mv643xx.h:845:
+#define MV64340_TIMER_COUNTER1^I^I^I^I^I 0x854$
ERROR: code indent should never use tabs
#1873: FILE: hw/pci-host/mv643xx.h:846:
+#define MV64340_TIMER_COUNTER2^I^I^I^I^I 0x858$
ERROR: code indent should never use tabs
#1874: FILE: hw/pci-host/mv643xx.h:847:
+#define MV64340_TIMER_COUNTER3^I^I^I^I^I 0x85C$
ERROR: code indent should never use tabs
#1875: FILE: hw/pci-host/mv643xx.h:848:
+#define MV64340_TIMER_COUNTER_0_3_CONTROL^I^I^I 0x864$
ERROR: code indent should never use tabs
#1876: FILE: hw/pci-host/mv643xx.h:849:
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE^I^I 0x868$
ERROR: code indent should never use tabs
#1877: FILE: hw/pci-host/mv643xx.h:850:
+#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK ^I^I 0x86c$
ERROR: code indent should never use tabs
#1880: FILE: hw/pci-host/mv643xx.h:853:
+/* Watchdog registers ^I */$
ERROR: code indent should never use tabs
#1911: FILE: hw/pci-host/mv643xx.h:884:
+/* Interrupts^I ^I^I^I*/$
total: 170 errors, 31 warnings, 1926 lines checked
Patch 5/6 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
6/6 Checking commit e772798c252c (hw/ppc: Add emulation of Genesi/bPlan Pegasos II)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#71:
new file mode 100644
total: 0 errors, 1 warnings, 174 lines checked
Patch 6/6 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/cover.1614007326.git.balaton@eik.bme.hu/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-22 15:22 ` [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller BALATON Zoltan
@ 2021-02-22 16:40 ` Philippe Mathieu-Daudé
2021-02-22 17:01 ` BALATON Zoltan
2021-02-23 4:40 ` David Gibson
1 sibling, 1 reply; 19+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-22 16:40 UTC (permalink / raw)
To: BALATON Zoltan, qemu-devel, qemu-ppc
Cc: Peter Maydell, David Gibson, Paolo Bonzini
On 2/22/21 4:22 PM, BALATON Zoltan wrote:
> The Marvell Discovery II aka. MV64361 is a PowerPC system controller
> chip that is used on the pegasos2 PPC board. This adds emulation of it
> that models the device enough to boot guests on this board. The
> mv643xx.h header with register definitions is taken from Linux 4.15.10
> only fixing end of line white space errors and removing not needed
> parts, it's otherwise keeps Linux formatting.
>
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
> ---
> hw/pci-host/Kconfig | 3 +
> hw/pci-host/meson.build | 2 +
> hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++++++++++++
> hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++++++++++++
> hw/pci-host/trace-events | 6 +
> include/hw/pci-host/mv64361.h | 8 +
> include/hw/pci/pci_ids.h | 1 +
> 7 files changed, 1905 insertions(+)
> create mode 100644 hw/pci-host/mv64361.c
> create mode 100644 hw/pci-host/mv643xx.h
> create mode 100644 include/hw/pci-host/mv64361.h
Is this the datasheet for this controller?
ftp://ftp.freecalypso.org/PowerPC/support_ics/mv64360/datasheets/DS_64360_1_2.pdf.zip
It seems to have common parts with the GT64120.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-22 16:40 ` Philippe Mathieu-Daudé
@ 2021-02-22 17:01 ` BALATON Zoltan
2021-02-22 17:23 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-22 17:01 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Peter Maydell, Paolo Bonzini, qemu-ppc, qemu-devel, David Gibson
[-- Attachment #1: Type: text/plain, Size: 2131 bytes --]
On Mon, 22 Feb 2021, Philippe Mathieu-Daudé wrote:
> On 2/22/21 4:22 PM, BALATON Zoltan wrote:
>> The Marvell Discovery II aka. MV64361 is a PowerPC system controller
>> chip that is used on the pegasos2 PPC board. This adds emulation of it
>> that models the device enough to boot guests on this board. The
>> mv643xx.h header with register definitions is taken from Linux 4.15.10
>> only fixing end of line white space errors and removing not needed
>> parts, it's otherwise keeps Linux formatting.
>>
>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>> ---
>> hw/pci-host/Kconfig | 3 +
>> hw/pci-host/meson.build | 2 +
>> hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++++++++++++
>> hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++++++++++++
>> hw/pci-host/trace-events | 6 +
>> include/hw/pci-host/mv64361.h | 8 +
>> include/hw/pci/pci_ids.h | 1 +
>> 7 files changed, 1905 insertions(+)
>> create mode 100644 hw/pci-host/mv64361.c
>> create mode 100644 hw/pci-host/mv643xx.h
>> create mode 100644 include/hw/pci-host/mv64361.h
>
> Is this the datasheet for this controller?
> ftp://ftp.freecalypso.org/PowerPC/support_ics/mv64360/datasheets/DS_64360_1_2.pdf.zip
>
> It seems to have common parts with the GT64120.
Yes, as noted on https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
the GT64120 seems to be an older (and MIPS specific) version of this chip
that Marvell bought and likely made this PPC version based on that. (The
whole pegasos2 seems to be like a MIPS board with a PPC CPU even down to
the firmware which looks quite like PMON just has SmartFirmware instead of
the commands of PMON. So whoever designed it, might have taken inspiration
from some MIPS hardware.) However the emulation of GT64xxx in QEMU seemed
to be not complete and different enough so I haven't looked at that when
implementing this so I don't know how much commonality is there and if
that would worth reusing. (If you think there could be some reuse then
that should be done separate of this series, afterwards it's merged.)
Regards,
BALATON Zoltan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-22 17:01 ` BALATON Zoltan
@ 2021-02-22 17:23 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 19+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-22 17:23 UTC (permalink / raw)
To: BALATON Zoltan
Cc: Peter Maydell, David Gibson, qemu-ppc, qemu-devel, Paolo Bonzini
On 2/22/21 6:01 PM, BALATON Zoltan wrote:
> On Mon, 22 Feb 2021, Philippe Mathieu-Daudé wrote:
>> On 2/22/21 4:22 PM, BALATON Zoltan wrote:
>>> The Marvell Discovery II aka. MV64361 is a PowerPC system controller
>>> chip that is used on the pegasos2 PPC board. This adds emulation of it
>>> that models the device enough to boot guests on this board. The
>>> mv643xx.h header with register definitions is taken from Linux 4.15.10
>>> only fixing end of line white space errors and removing not needed
>>> parts, it's otherwise keeps Linux formatting.
>>>
>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>> ---
>>> hw/pci-host/Kconfig | 3 +
>>> hw/pci-host/meson.build | 2 +
>>> hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++++++++++++
>>> hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++++++++++++
>>> hw/pci-host/trace-events | 6 +
>>> include/hw/pci-host/mv64361.h | 8 +
>>> include/hw/pci/pci_ids.h | 1 +
>>> 7 files changed, 1905 insertions(+)
>>> create mode 100644 hw/pci-host/mv64361.c
>>> create mode 100644 hw/pci-host/mv643xx.h
>>> create mode 100644 include/hw/pci-host/mv64361.h
>>
>> Is this the datasheet for this controller?
>> ftp://ftp.freecalypso.org/PowerPC/support_ics/mv64360/datasheets/DS_64360_1_2.pdf.zip
>>
>>
>> It seems to have common parts with the GT64120.
>
> Yes, as noted on https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
> the GT64120 seems to be an older (and MIPS specific) version of this
> chip that Marvell bought and likely made this PPC version based on that.
> (The whole pegasos2 seems to be like a MIPS board with a PPC CPU even
> down to the firmware which looks quite like PMON just has SmartFirmware
> instead of the commands of PMON. So whoever designed it, might have
> taken inspiration from some MIPS hardware.) However the emulation of
> GT64xxx in QEMU seemed to be not complete and different enough so I
> haven't looked at that when implementing this so I don't know how much
> commonality is there and if that would worth reusing. (If you think
> there could be some reuse then that should be done separate of this
> series, afterwards it's merged.)
Yes, I see your patch is more complete. Fair enough.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs
2021-02-22 15:22 ` [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs BALATON Zoltan
@ 2021-02-23 4:34 ` David Gibson
2021-02-23 9:18 ` BALATON Zoltan
0 siblings, 1 reply; 19+ messages in thread
From: David Gibson @ 2021-02-23 4:34 UTC (permalink / raw)
To: BALATON Zoltan; +Cc: Peter Maydell, Paolo Bonzini, qemu-ppc, qemu-devel, f4bug
[-- Attachment #1: Type: text/plain, Size: 6804 bytes --]
On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
> In VIA super south bridge the io ranges of superio components
> (parallel and serial ports and FDC) can be controlled by superio
> config registers to set their base address and enable/disable them.
> This is not easy to implement in QEMU because ISA emulation is only
> designed to set io base address once on creating the device and io
> ranges are registered at creation and cannot easily be disabled or
> moved later.
>
> In this patch we hack around that but only for serial ports because
> those have a single io range at port base that's relatively easy to
> handle and it's what guests actually use and set address different
> than the default.
>
> We do not attempt to handle controlling the parallel and FDC regions
> because those have multiple io ranges so handling them would be messy
> and guests either don't change their deafult or don't care. We could
> even get away with disabling and not emulating them, but since they
> are already there, this patch leaves them mapped at their default
> address just in case this could be useful for a guest in the future.
>
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
The maintainers of the hw/isa/vt82c686.c should probably be CCed on this.
> ---
> hw/isa/vt82c686.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 82 insertions(+), 2 deletions(-)
>
> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
> index 5db9b1706c..98bd57a074 100644
> --- a/hw/isa/vt82c686.c
> +++ b/hw/isa/vt82c686.c
> @@ -252,8 +252,24 @@ static const TypeInfo vt8231_pm_info = {
> typedef struct SuperIOConfig {
> uint8_t regs[0x100];
> MemoryRegion io;
> + ISASuperIODevice *superio;
> + MemoryRegion *serial_io[SUPERIO_MAX_SERIAL_PORTS];
> } SuperIOConfig;
>
> +static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
> + int offs)
> +{
> + MemoryRegion *subregion, *mr = NULL;
> +
> + QTAILQ_FOREACH(subregion, &parent->subregions, subregions_link) {
> + if (subregion->addr == offs) {
> + mr = subregion;
> + break;
> + }
> + }
> + return mr;
> +}
> +
> static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
> unsigned size)
> {
> @@ -279,7 +295,53 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
> case 0xfd ... 0xff:
> /* ignore write to read only registers */
> return;
> - /* case 0xe6 ... 0xe8: Should set base port of parallel and serial */
> + case 0xe2:
> + {
> + data &= 0x1f;
> + if (data & BIT(2)) { /* Serial port 1 enable */
> + ISADevice *dev = sc->superio->serial[0];
> + if (!memory_region_is_mapped(sc->serial_io[0])) {
> + memory_region_add_subregion(isa_address_space_io(dev),
> + dev->ioport_id, sc->serial_io[0]);
> + }
> + } else {
> + MemoryRegion *io = isa_address_space_io(sc->superio->serial[0]);
> + if (memory_region_is_mapped(sc->serial_io[0])) {
> + memory_region_del_subregion(io, sc->serial_io[0]);
> + }
> + }
> + if (data & BIT(3)) { /* Serial port 2 enable */
> + ISADevice *dev = sc->superio->serial[1];
> + if (!memory_region_is_mapped(sc->serial_io[1])) {
> + memory_region_add_subregion(isa_address_space_io(dev),
> + dev->ioport_id, sc->serial_io[1]);
> + }
> + } else {
> + MemoryRegion *io = isa_address_space_io(sc->superio->serial[1]);
> + if (memory_region_is_mapped(sc->serial_io[1])) {
> + memory_region_del_subregion(io, sc->serial_io[1]);
> + }
> + }
> + break;
> + }
> + case 0xe7: /* Serial port 1 io base address */
> + {
> + data &= 0xfe;
> + sc->superio->serial[0]->ioport_id = data << 2;
> + if (memory_region_is_mapped(sc->serial_io[0])) {
> + memory_region_set_address(sc->serial_io[0], data << 2);
> + }
> + break;
> + }
> + case 0xe8: /* Serial port 2 io base address */
> + {
> + data &= 0xfe;
> + sc->superio->serial[1]->ioport_id = data << 2;
> + if (memory_region_is_mapped(sc->serial_io[1])) {
> + memory_region_set_address(sc->serial_io[1], data << 2);
> + }
> + break;
> + }
> default:
> qemu_log_mask(LOG_UNIMP,
> "via_superio_cfg: unimplemented register 0x%x\n", idx);
> @@ -385,6 +447,7 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
> DeviceState *dev = DEVICE(d);
> ISABus *isa_bus;
> qemu_irq *isa_irq;
> + ISASuperIOClass *ic;
> int i;
>
> qdev_init_gpio_out(dev, &s->cpu_intr, 1);
> @@ -394,7 +457,9 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
> isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
> i8254_pit_init(isa_bus, 0x40, 0, NULL);
> i8257_dma_init(isa_bus, 0);
> - isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
> + s->superio_cfg.superio = ISA_SUPERIO(isa_create_simple(isa_bus,
> + TYPE_VT82C686B_SUPERIO));
> + ic = ISA_SUPERIO_GET_CLASS(s->superio_cfg.superio);
> mc146818_rtc_init(isa_bus, 2000, NULL);
>
> for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
> @@ -412,6 +477,21 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
> */
> memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
> &s->superio_cfg.io);
> +
> + /* Grab io regions of serial devices so we can control them */
> + for (i = 0; i < ic->serial.count; i++) {
> + ISADevice *sd = s->superio_cfg.superio->serial[i];
> + MemoryRegion *io = isa_address_space_io(sd);
> + MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
> + if (!mr) {
> + error_setg(errp, "Could not get io region for serial %d", i);
> + return;
> + }
> + s->superio_cfg.serial_io[i] = mr;
> + if (memory_region_is_mapped(mr)) {
> + memory_region_del_subregion(io, mr);
> + }
> + }
> }
>
> static void via_class_init(ObjectClass *klass, void *data)
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II
2021-02-22 15:22 ` [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II BALATON Zoltan
@ 2021-02-23 4:38 ` David Gibson
0 siblings, 0 replies; 19+ messages in thread
From: David Gibson @ 2021-02-23 4:38 UTC (permalink / raw)
To: BALATON Zoltan; +Cc: Peter Maydell, Paolo Bonzini, qemu-ppc, qemu-devel, f4bug
[-- Attachment #1: Type: text/plain, Size: 7901 bytes --]
On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
> Add new machine called pegasos2 emulating the Genesi/bPlan Pegasos II,
> a PowerPC board based on the Marvell MV64361 system controller and the
> VIA VT8231 integrated south bridge/superio chips. It can run Linux,
> AmigaOS and a wide range of MorphOS versions. Currently a firmware ROM
> image is needed to boot and only MorphOS has a video driver to produce
> graphics output. Linux could work too but distros that supported this
> machine don't include usual video drivers so those only run with
> serial console for now.
>
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
> ---
> default-configs/devices/ppc-softmmu.mak | 2 +
> hw/ppc/Kconfig | 10 ++
> hw/ppc/meson.build | 2 +
> hw/ppc/pegasos2.c | 144 ++++++++++++++++++++++++
> 4 files changed, 158 insertions(+)
> create mode 100644 hw/ppc/pegasos2.c
>
> diff --git a/default-configs/devices/ppc-softmmu.mak b/default-configs/devices/ppc-softmmu.mak
> index 61b78b844d..4535993d8d 100644
> --- a/default-configs/devices/ppc-softmmu.mak
> +++ b/default-configs/devices/ppc-softmmu.mak
> @@ -14,5 +14,7 @@ CONFIG_SAM460EX=y
> CONFIG_MAC_OLDWORLD=y
> CONFIG_MAC_NEWWORLD=y
>
> +CONFIG_PEGASOS2=y
> +
> # For PReP
> CONFIG_PREP=y
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index d11dc30509..98d8dd1a84 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -68,6 +68,16 @@ config SAM460EX
> select USB_OHCI
> select FDT_PPC
>
> +config PEGASOS2
> + bool
> + select MV64361
> + select VT82C686
> + select IDE_VIA
> + select SMBUS_EEPROM
> +# These should come with VT82C686
> + select APM
> + select ACPI_X86
> +
> config PREP
> bool
> imply PCI_DEVICES
> diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build
> index 218631c883..86d6f379d1 100644
> --- a/hw/ppc/meson.build
> +++ b/hw/ppc/meson.build
> @@ -78,5 +78,7 @@ ppc_ss.add(when: 'CONFIG_E500', if_true: files(
> ))
> # PowerPC 440 Xilinx ML507 reference board.
> ppc_ss.add(when: 'CONFIG_VIRTEX', if_true: files('virtex_ml507.c'))
> +# Pegasos2
> +ppc_ss.add(when: 'CONFIG_PEGASOS2', if_true: files('pegasos2.c'))
>
> hw_arch += {'ppc': ppc_ss}
> diff --git a/hw/ppc/pegasos2.c b/hw/ppc/pegasos2.c
> new file mode 100644
> index 0000000000..8b96961c90
> --- /dev/null
> +++ b/hw/ppc/pegasos2.c
> @@ -0,0 +1,144 @@
> +/*
> + * QEMU PowerPC CHRP (Genesi/bPlan Pegasos II) hardware System Emulator
> + *
> + * Copyright (c) 2018-2020 BALATON Zoltan
> + *
> + * This work is licensed under the GNU GPL license version 2 or later.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/units.h"
> +#include "qapi/error.h"
> +#include "hw/hw.h"
> +#include "hw/ppc/ppc.h"
> +#include "hw/sysbus.h"
> +#include "hw/pci/pci_host.h"
> +#include "hw/irq.h"
> +#include "hw/pci-host/mv64361.h"
> +#include "hw/isa/vt82c686.h"
> +#include "hw/ide/pci.h"
> +#include "hw/i2c/smbus_eeprom.h"
> +#include "hw/qdev-properties.h"
> +#include "sysemu/reset.h"
> +#include "hw/boards.h"
> +#include "hw/loader.h"
> +#include "hw/fw-path-provider.h"
> +#include "elf.h"
> +#include "qemu/log.h"
> +#include "qemu/error-report.h"
> +#include "sysemu/kvm.h"
> +#include "kvm_ppc.h"
> +#include "exec/address-spaces.h"
> +#include "trace.h"
> +#include "qemu/datadir.h"
> +#include "sysemu/device_tree.h"
> +
> +#define PROM_FILENAME "pegasos2.rom"
> +#define PROM_ADDR 0xfff00000
> +#define PROM_SIZE 0x80000
> +
> +#define BUS_FREQ 133333333
> +
> +static void pegasos2_reset(void *opaque)
I'd suggest pegasos2_cpu_reset() for clarity. With the current name
I'd assume it was the machine reset function.
> +{
> + PowerPCCPU *cpu = opaque;
> +
> + cpu_reset(CPU(cpu));
> + cpu->env.spr[SPR_HID1] = 7ULL << 28;
> +}
> +
> +static void pegasos2_init(MachineState *machine)
> +{
> + PowerPCCPU *cpu = NULL;
> + MemoryRegion *rom = g_new(MemoryRegion, 1);
> + DeviceState *mv;
> + PCIBus *pci_bus;
> + PCIDevice *dev;
> + I2CBus *i2c_bus;
> + const char *fwname = machine->firmware ?: PROM_FILENAME;
> + char *filename;
> + int sz;
> + uint8_t *spd_data;
> +
> + /* init CPU */
> + cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
> + if (PPC_INPUT(&cpu->env) != PPC_FLAGS_INPUT_6xx) {
> + error_report("Incompatible CPU, only 6xx bus supported");
> + exit(1);
> + }
> +
> + /* Set time-base frequency */
> + cpu_ppc_tb_init(&cpu->env, BUS_FREQ / 4);
> + qemu_register_reset(pegasos2_reset, cpu);
> +
> + /* RAM */
> + memory_region_add_subregion(get_system_memory(), 0, machine->ram);
> +
> + /* allocate and load firmware */
> + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, fwname);
> + if (!filename) {
> + error_report("Could not find firmware '%s'", fwname);
> + exit(1);
> + }
> + memory_region_init_rom(rom, NULL, "pegasos2.rom", PROM_SIZE, &error_fatal);
> + memory_region_add_subregion(get_system_memory(), PROM_ADDR, rom);
> + sz = load_elf(filename, NULL, NULL, NULL, NULL, NULL, NULL, NULL, 1,
> + PPC_ELF_MACHINE, 0, 0);
> + if (sz <= 0) {
> + sz = load_image_targphys(filename, PROM_ADDR, PROM_SIZE);
> + }
> + if (sz <= 0 || sz > PROM_SIZE) {
> + error_report("Could not load firmware '%s'", filename);
> + exit(1);
> + }
> + g_free(filename);
> +
> + /* Marvell Discovery II system controller */
> + mv = DEVICE(sysbus_create_simple(TYPE_MV64361, -1,
> + ((qemu_irq *)cpu->env.irq_inputs)[PPC6xx_INPUT_INT]));
> + pci_bus = mv64361_get_pci_bus(mv, 1);
> +
> + /* VIA VT8231 South Bridge (multifunction PCI device) */
> + /* VT8231 function 0: PCI-to-ISA Bridge */
> + dev = pci_create_simple_multifunction(pci_bus, PCI_DEVFN(12, 0), true,
> + TYPE_VT8231_ISA);
> + qdev_connect_gpio_out(DEVICE(dev), 0,
> + qdev_get_gpio_in_named(mv, "gpp", 31));
> +
> + /* VT8231 function 1: IDE Controller */
> + dev = pci_create_simple(pci_bus, PCI_DEVFN(12, 1), "via-ide");
> + pci_ide_create_devs(dev);
> +
> + /* VT8231 function 2-3: USB Ports */
> + pci_create_simple(pci_bus, PCI_DEVFN(12, 2), "vt82c686b-usb-uhci");
> + pci_create_simple(pci_bus, PCI_DEVFN(12, 3), "vt82c686b-usb-uhci");
> +
> + /* VT8231 function 4: Power Management Controller */
> + dev = pci_create_simple(pci_bus, PCI_DEVFN(12, 4), TYPE_VT8231_PM);
> + i2c_bus = I2C_BUS(qdev_get_child_bus(DEVICE(dev), "i2c"));
> + spd_data = spd_data_generate(DDR, machine->ram_size);
> + smbus_eeprom_init_one(i2c_bus, 0x57, spd_data);
> +
> + /* VT8231 function 5-6: AC97 Audio & Modem */
> + pci_create_simple(pci_bus, PCI_DEVFN(12, 5), TYPE_VIA_AC97);
> + pci_create_simple(pci_bus, PCI_DEVFN(12, 6), TYPE_VIA_MC97);
> +
> + /* other PC hardware */
> + pci_vga_init(pci_bus);
> +}
> +
> +static void pegasos2_machine(MachineClass *mc)
> +{
> + mc->desc = "Genesi/bPlan Pegasos II";
> + mc->init = pegasos2_init;
> + mc->block_default_type = IF_IDE;
> + mc->default_boot_order = "cd";
> + mc->default_display = "std";
> + mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("7400_v2.9");
> + mc->default_ram_id = "pegasos2.ram";
> + mc->default_ram_size = 512 * MiB;
> +}
> +
> +DEFINE_MACHINE("pegasos2", pegasos2_machine)
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-22 15:22 ` [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller BALATON Zoltan
2021-02-22 16:40 ` Philippe Mathieu-Daudé
@ 2021-02-23 4:40 ` David Gibson
2021-02-23 9:13 ` BALATON Zoltan
1 sibling, 1 reply; 19+ messages in thread
From: David Gibson @ 2021-02-23 4:40 UTC (permalink / raw)
To: BALATON Zoltan; +Cc: Peter Maydell, Paolo Bonzini, qemu-ppc, qemu-devel, f4bug
[-- Attachment #1: Type: text/plain, Size: 95308 bytes --]
On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
> The Marvell Discovery II aka. MV64361 is a PowerPC system controller
> chip that is used on the pegasos2 PPC board. This adds emulation of it
> that models the device enough to boot guests on this board. The
> mv643xx.h header with register definitions is taken from Linux 4.15.10
> only fixing end of line white space errors and removing not needed
> parts, it's otherwise keeps Linux formatting.
>
> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
This needs to go before the previous patch to avoid bisect breakage,
doesn't it?
> ---
> hw/pci-host/Kconfig | 3 +
> hw/pci-host/meson.build | 2 +
> hw/pci-host/mv64361.c | 966 ++++++++++++++++++++++++++++++++++
> hw/pci-host/mv643xx.h | 919 ++++++++++++++++++++++++++++++++
> hw/pci-host/trace-events | 6 +
> include/hw/pci-host/mv64361.h | 8 +
> include/hw/pci/pci_ids.h | 1 +
> 7 files changed, 1905 insertions(+)
> create mode 100644 hw/pci-host/mv64361.c
> create mode 100644 hw/pci-host/mv643xx.h
> create mode 100644 include/hw/pci-host/mv64361.h
>
> diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
> index 8b8c763c28..65a983d6fd 100644
> --- a/hw/pci-host/Kconfig
> +++ b/hw/pci-host/Kconfig
> @@ -68,3 +68,6 @@ config PCI_POWERNV
>
> config REMOTE_PCIHOST
> bool
> +
> +config MV64361
> + bool
> diff --git a/hw/pci-host/meson.build b/hw/pci-host/meson.build
> index 1847c69905..3f9e716cfa 100644
> --- a/hw/pci-host/meson.build
> +++ b/hw/pci-host/meson.build
> @@ -18,6 +18,8 @@ pci_ss.add(when: 'CONFIG_GRACKLE_PCI', if_true: files('grackle.c'))
> pci_ss.add(when: 'CONFIG_UNIN_PCI', if_true: files('uninorth.c'))
> # PowerPC E500 boards
> pci_ss.add(when: 'CONFIG_PPCE500_PCI', if_true: files('ppce500.c'))
> +# Pegasos2
> +pci_ss.add(when: 'CONFIG_MV64361', if_true: files('mv64361.c'))
>
> # ARM devices
> pci_ss.add(when: 'CONFIG_VERSATILE_PCI', if_true: files('versatile.c'))
> diff --git a/hw/pci-host/mv64361.c b/hw/pci-host/mv64361.c
> new file mode 100644
> index 0000000000..d71402f8b5
> --- /dev/null
> +++ b/hw/pci-host/mv64361.c
> @@ -0,0 +1,966 @@
> +/*
> + * Marvell Discovery II MV64361 System Controller for
> + * QEMU PowerPC CHRP (Genesi/bPlan Pegasos II) hardware System Emulator
> + *
> + * Copyright (c) 2018-2020 BALATON Zoltan
> + *
> + * This work is licensed under the GNU GPL license version 2 or later.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu-common.h"
> +#include "qemu/units.h"
> +#include "qapi/error.h"
> +#include "hw/hw.h"
> +#include "hw/sysbus.h"
> +#include "hw/pci/pci.h"
> +#include "hw/pci/pci_host.h"
> +#include "hw/irq.h"
> +#include "hw/intc/i8259.h"
> +#include "hw/qdev-properties.h"
> +#include "exec/address-spaces.h"
> +#include "qemu/log.h"
> +#include "qemu/error-report.h"
> +#include "trace.h"
> +#include "hw/pci-host/mv64361.h"
> +#include "mv643xx.h"
> +
> +#define TYPE_MV64361_PCI_BRIDGE "mv64361-pcibridge"
> +
> +static void mv64361_pcibridge_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
> +
> + k->vendor_id = PCI_VENDOR_ID_MARVELL;
> + k->device_id = PCI_DEVICE_ID_MARVELL_MV6436X;
> + k->class_id = PCI_CLASS_BRIDGE_HOST;
> + /*
> + * PCI-facing part of the host bridge,
> + * not usable without the host-facing part
> + */
> + dc->user_creatable = false;
> +}
> +
> +static const TypeInfo mv64361_pcibridge_info = {
> + .name = TYPE_MV64361_PCI_BRIDGE,
> + .parent = TYPE_PCI_DEVICE,
> + .instance_size = sizeof(PCIDevice),
> + .class_init = mv64361_pcibridge_class_init,
> + .interfaces = (InterfaceInfo[]) {
> + { INTERFACE_CONVENTIONAL_PCI_DEVICE },
> + { },
> + },
> +};
> +
> +
> +#define TYPE_MV64361_PCI "mv64361-pcihost"
> +OBJECT_DECLARE_SIMPLE_TYPE(MV64361PCIState, MV64361_PCI)
> +
> +struct MV64361PCIState {
> + PCIHostState parent_obj;
> +
> + uint8_t index;
> + MemoryRegion io;
> + MemoryRegion mem;
> + qemu_irq irq[PCI_NUM_PINS];
> +
> + uint32_t io_base;
> + uint32_t io_size;
> + uint32_t mem_base[4];
> + uint32_t mem_size[4];
> + uint64_t remap[5];
> +};
> +
> +static int mv64361_pcihost_map_irq(PCIDevice *pci_dev, int n)
> +{
> + return (n + PCI_SLOT(pci_dev->devfn)) % PCI_NUM_PINS;
> +}
> +
> +static void mv64361_pcihost_set_irq(void *opaque, int n, int level)
> +{
> + MV64361PCIState *s = opaque;
> + qemu_set_irq(s->irq[n], level);
> +}
> +
> +static void mv64361_pcihost_realize(DeviceState *dev, Error **errp)
> +{
> + MV64361PCIState *s = MV64361_PCI(dev);
> + PCIHostState *h = PCI_HOST_BRIDGE(dev);
> + char *name;
> +
> + name = g_strdup_printf("pci%d-io", s->index);
> + memory_region_init(&s->io, OBJECT(dev), name, 0x10000);
> + g_free(name);
> + name = g_strdup_printf("pci%d-mem", s->index);
> + memory_region_init(&s->mem, OBJECT(dev), name, 1ULL << 32);
> + g_free(name);
> + name = g_strdup_printf("pci.%d", s->index);
> + h->bus = pci_register_root_bus(dev, name, mv64361_pcihost_set_irq,
> + mv64361_pcihost_map_irq, dev,
> + &s->mem, &s->io, 0, 4, TYPE_PCI_BUS);
> + g_free(name);
> + pci_create_simple(h->bus, 0, TYPE_MV64361_PCI_BRIDGE);
> +}
> +
> +static Property mv64361_pcihost_props[] = {
> + DEFINE_PROP_UINT8("index", MV64361PCIState, index, 0),
> + DEFINE_PROP_END_OF_LIST()
> +};
> +
> +static void mv64361_pcihost_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->realize = mv64361_pcihost_realize;
> + device_class_set_props(dc, mv64361_pcihost_props);
> + set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> +}
> +
> +static const TypeInfo mv64361_pcihost_info = {
> + .name = TYPE_MV64361_PCI,
> + .parent = TYPE_PCI_HOST_BRIDGE,
> + .instance_size = sizeof(MV64361PCIState),
> + .class_init = mv64361_pcihost_class_init,
> +};
> +
> +static void mv64361_pci_register_types(void)
> +{
> + type_register_static(&mv64361_pcihost_info);
> + type_register_static(&mv64361_pcibridge_info);
> +}
> +
> +type_init(mv64361_pci_register_types)
> +
> +
> +OBJECT_DECLARE_SIMPLE_TYPE(MV64361State, MV64361)
> +
> +struct MV64361State {
> + SysBusDevice parent_obj;
> +
> + MemoryRegion regs;
> + MV64361PCIState pci[2];
> + MemoryRegion cpu_win[19];
> + qemu_irq cpu_irq;
> +
> + /* registers state */
> + uint32_t cpu_conf;
> + uint32_t regs_base;
> + uint32_t base_addr_enable;
> + uint64_t main_int_cr;
> + uint64_t cpu0_int_mask;
> + uint32_t gpp_io;
> + uint32_t gpp_level;
> + uint32_t gpp_value;
> + uint32_t gpp_int_cr;
> + uint32_t gpp_int_mask;
> + bool gpp_int_level;
> +};
> +
> +enum mv64361_irq_cause {
> + MV64361_IRQ_DEVERR = 1,
> + MV64361_IRQ_DMAERR,
> + MV64361_IRQ_CPUERR,
> + MV64361_IRQ_IDMA0,
> + MV64361_IRQ_IDMA1,
> + MV64361_IRQ_IDMA2,
> + MV64361_IRQ_IDMA3,
> + MV64361_IRQ_TIMER0,
> + MV64361_IRQ_TIMER1,
> + MV64361_IRQ_TIMER2,
> + MV64361_IRQ_TIMER3,
> + MV64361_IRQ_PCI0,
> + MV64361_IRQ_SRAMERR,
> + MV64361_IRQ_GBEERR,
> + MV64361_IRQ_CERR,
> + MV64361_IRQ_PCI1,
> + MV64361_IRQ_DRAMERR,
> + MV64361_IRQ_WDNMI,
> + MV64361_IRQ_WDE,
> + MV64361_IRQ_PCI0IN,
> + MV64361_IRQ_PCI0OUT,
> + MV64361_IRQ_PCI1IN,
> + MV64361_IRQ_PCI1OUT,
> + MV64361_IRQ_P1_GPP0_7,
> + MV64361_IRQ_P1_GPP8_15,
> + MV64361_IRQ_P1_GPP16_23,
> + MV64361_IRQ_P1_GPP24_31,
> + MV64361_IRQ_P1_CPU_DB,
> + /* 29-31: reserved */
> + MV64361_IRQ_GBE0 = 32,
> + MV64361_IRQ_GBE1,
> + MV64361_IRQ_GBE2,
> + /* 35: reserved */
> + MV64361_IRQ_SDMA0 = 36,
> + MV64361_IRQ_TWSI,
> + MV64361_IRQ_SDMA1,
> + MV64361_IRQ_BRG,
> + MV64361_IRQ_MPSC0,
> + MV64361_IRQ_MPSC1,
> + MV64361_IRQ_G0RX,
> + MV64361_IRQ_G0TX,
> + MV64361_IRQ_G0MISC,
> + MV64361_IRQ_G1RX,
> + MV64361_IRQ_G1TX,
> + MV64361_IRQ_G1MISC,
> + MV64361_IRQ_G2RX,
> + MV64361_IRQ_G2TX,
> + MV64361_IRQ_G2MISC,
> + /* 51-55: reserved */
> + MV64361_IRQ_P0_GPP0_7 = 56,
> + MV64361_IRQ_P0_GPP8_15,
> + MV64361_IRQ_P0_GPP16_23,
> + MV64361_IRQ_P0_GPP24_31,
> + MV64361_IRQ_P0_CPU_DB,
> + /* 61-63: reserved */
> +};
> +
> +PCIBus *mv64361_get_pci_bus(DeviceState *dev, int n)
> +{
> + MV64361State *mv = MV64361(dev);
> + return PCI_HOST_BRIDGE(&mv->pci[n])->bus;
> +}
> +
> +static void unmap_region(MemoryRegion *mr)
> +{
> + if (memory_region_is_mapped(mr)) {
> + memory_region_del_subregion(get_system_memory(), mr);
> + object_unparent(OBJECT(mr));
> + }
> +}
> +
> +static void map_pci_region(MemoryRegion *mr, MemoryRegion *parent,
> + struct Object *owner, const char *name,
> + hwaddr poffs, uint64_t size, hwaddr moffs)
> +{
> + memory_region_init_alias(mr, owner, name, parent, poffs, size);
> + memory_region_add_subregion(get_system_memory(), moffs, mr);
> + trace_mv64361_region_map(name, poffs, size, moffs);
> +}
> +
> +static void setup_mem_windows(MV64361State *s, uint32_t val)
> +{
> + MV64361PCIState *p;
> + MemoryRegion *mr;
> + uint32_t mask;
> + int i;
> +
> + val &= 0x1fffff;
> + for (mask = 1, i = 0; i < 21; i++, mask <<= 1) {
> + if ((val & mask) != (s->base_addr_enable & mask)) {
> + trace_mv64361_region_enable(!(val & mask) ? "enable" : "disable", i);
> + switch (i) {
> + /*
> + * 0-3 are SDRAM chip selects but we map all RAM directly
> + * 4-7 are device chip selects (not sure what those are)
> + * 8 is Boot device (ROM) chip select but we map that directly too
> + */
> + case 9:
> + p = &s->pci[0];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->io, OBJECT(s), "pci0-io-win",
> + p->remap[4], (p->io_size + 1) << 16,
> + (p->io_base & 0xfffff) << 16);
> + }
> + break;
> + case 10:
> + p = &s->pci[0];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem0-win",
> + p->remap[0], (p->mem_size[0] + 1) << 16,
> + (p->mem_base[0] & 0xfffff) << 16);
> + }
> + break;
> + case 11:
> + p = &s->pci[0];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem1-win",
> + p->remap[1], (p->mem_size[1] + 1) << 16,
> + (p->mem_base[1] & 0xfffff) << 16);
> + }
> + break;
> + case 12:
> + p = &s->pci[0];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem2-win",
> + p->remap[2], (p->mem_size[2] + 1) << 16,
> + (p->mem_base[2] & 0xfffff) << 16);
> + }
> + break;
> + case 13:
> + p = &s->pci[0];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci0-mem3-win",
> + p->remap[3], (p->mem_size[3] + 1) << 16,
> + (p->mem_base[3] & 0xfffff) << 16);
> + }
> + break;
> + case 14:
> + p = &s->pci[1];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->io, OBJECT(s), "pci1-io-win",
> + p->remap[4], (p->io_size + 1) << 16,
> + (p->io_base & 0xfffff) << 16);
> + }
> + break;
> + case 15:
> + p = &s->pci[1];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem0-win",
> + p->remap[0], (p->mem_size[0] + 1) << 16,
> + (p->mem_base[0] & 0xfffff) << 16);
> + }
> + break;
> + case 16:
> + p = &s->pci[1];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem1-win",
> + p->remap[1], (p->mem_size[1] + 1) << 16,
> + (p->mem_base[1] & 0xfffff) << 16);
> + }
> + break;
> + case 17:
> + p = &s->pci[1];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem2-win",
> + p->remap[2], (p->mem_size[2] + 1) << 16,
> + (p->mem_base[2] & 0xfffff) << 16);
> + }
> + break;
> + case 18:
> + p = &s->pci[1];
> + mr = &s->cpu_win[i];
> + unmap_region(mr);
> + if (!(val & mask)) {
> + map_pci_region(mr, &p->mem, OBJECT(s), "pci1-mem3-win",
> + p->remap[3], (p->mem_size[3] + 1) << 16,
> + (p->mem_base[3] & 0xfffff) << 16);
> + }
> + break;
> + /* 19 is integrated SRAM */
> + case 20:
> + mr = &s->regs;
> + unmap_region(mr);
> + if (!(val & mask)) {
> + memory_region_add_subregion(get_system_memory(),
> + (s->regs_base & 0xfffff) << 16, mr);
> + }
> + break;
> + }
> + }
> + }
> +}
> +
> +static void mv64361_update_irq(void *opaque, int n, int level)
> +{
> + MV64361State *s = opaque;
> + uint64_t val = s->main_int_cr;
> +
> + if (level) {
> + val |= BIT_ULL(n);
> + } else {
> + val &= ~BIT_ULL(n);
> + }
> + if ((s->main_int_cr & s->cpu0_int_mask) != (val & s->cpu0_int_mask)) {
> + qemu_set_irq(s->cpu_irq, level);
> + }
> + s->main_int_cr = val;
> +}
> +
> +static uint64_t mv64361_read(void *opaque, hwaddr addr, unsigned int size)
> +{
> + MV64361State *s = MV64361(opaque);
> + uint32_t ret = 0;
> +
> + switch (addr) {
> + case MV64340_CPU_CONFIG:
> + ret = s->cpu_conf;
> + break;
> + case MV64340_PCI_0_IO_BASE_ADDR:
> + ret = s->pci[0].io_base;
> + break;
> + case MV64340_PCI_0_IO_SIZE:
> + ret = s->pci[0].io_size;
> + break;
> + case MV64340_PCI_0_IO_ADDR_REMAP:
> + ret = s->pci[0].remap[4] >> 16;
> + break;
> + case MV64340_PCI_0_MEMORY0_BASE_ADDR:
> + ret = s->pci[0].mem_base[0];
> + break;
> + case MV64340_PCI_0_MEMORY0_SIZE:
> + ret = s->pci[0].mem_size[0];
> + break;
> + case MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP:
> + ret = (s->pci[0].remap[0] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP:
> + ret = s->pci[0].remap[0] >> 32;
> + break;
> + case MV64340_PCI_0_MEMORY1_BASE_ADDR:
> + ret = s->pci[0].mem_base[1];
> + break;
> + case MV64340_PCI_0_MEMORY1_SIZE:
> + ret = s->pci[0].mem_size[1];
> + break;
> + case MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP:
> + ret = (s->pci[0].remap[1] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP:
> + ret = s->pci[0].remap[1] >> 32;
> + break;
> + case MV64340_PCI_0_MEMORY2_BASE_ADDR:
> + ret = s->pci[0].mem_base[2];
> + break;
> + case MV64340_PCI_0_MEMORY2_SIZE:
> + ret = s->pci[0].mem_size[2];
> + break;
> + case MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP:
> + ret = (s->pci[0].remap[2] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP:
> + ret = s->pci[0].remap[2] >> 32;
> + break;
> + case MV64340_PCI_0_MEMORY3_BASE_ADDR:
> + ret = s->pci[0].mem_base[3];
> + break;
> + case MV64340_PCI_0_MEMORY3_SIZE:
> + ret = s->pci[0].mem_size[3];
> + break;
> + case MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP:
> + ret = (s->pci[0].remap[3] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP:
> + ret = s->pci[0].remap[3] >> 32;
> + break;
> + case MV64340_PCI_1_IO_BASE_ADDR:
> + ret = s->pci[1].io_base;
> + break;
> + case MV64340_PCI_1_IO_SIZE:
> + ret = s->pci[1].io_size;
> + break;
> + case MV64340_PCI_1_IO_ADDR_REMAP:
> + ret = s->pci[1].remap[4] >> 16;
> + break;
> + case MV64340_PCI_1_MEMORY0_BASE_ADDR:
> + ret = s->pci[1].mem_base[0];
> + break;
> + case MV64340_PCI_1_MEMORY0_SIZE:
> + ret = s->pci[1].mem_size[0];
> + break;
> + case MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP:
> + ret = (s->pci[1].remap[0] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP:
> + ret = s->pci[1].remap[0] >> 32;
> + break;
> + case MV64340_PCI_1_MEMORY1_BASE_ADDR:
> + ret = s->pci[1].mem_base[1];
> + break;
> + case MV64340_PCI_1_MEMORY1_SIZE:
> + ret = s->pci[1].mem_size[1];
> + break;
> + case MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP:
> + ret = (s->pci[1].remap[1] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP:
> + ret = s->pci[1].remap[1] >> 32;
> + break;
> + case MV64340_PCI_1_MEMORY2_BASE_ADDR:
> + ret = s->pci[1].mem_base[2];
> + break;
> + case MV64340_PCI_1_MEMORY2_SIZE:
> + ret = s->pci[1].mem_size[2];
> + break;
> + case MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP:
> + ret = (s->pci[1].remap[2] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP:
> + ret = s->pci[1].remap[2] >> 32;
> + break;
> + case MV64340_PCI_1_MEMORY3_BASE_ADDR:
> + ret = s->pci[1].mem_base[3];
> + break;
> + case MV64340_PCI_1_MEMORY3_SIZE:
> + ret = s->pci[1].mem_size[3];
> + break;
> + case MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP:
> + ret = (s->pci[1].remap[3] & 0xffff0000) >> 16;
> + break;
> + case MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP:
> + ret = s->pci[1].remap[3] >> 32;
> + break;
> + case MV64340_INTERNAL_SPACE_BASE_ADDR:
> + ret = s->regs_base;
> + break;
> + case MV64340_BASE_ADDR_ENABLE:
> + ret = s->base_addr_enable;
> + break;
> + case MV64340_PCI_0_CONFIG_ADDR:
> + ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(&s->pci[0]), 0, size);
> + break;
> + case MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG ...
> + MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG + 3:
> + ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(&s->pci[0]),
> + addr - MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, size);
> + break;
> + case MV64340_PCI_1_CONFIG_ADDR:
> + ret = pci_host_conf_le_ops.read(PCI_HOST_BRIDGE(&s->pci[1]), 0, size);
> + break;
> + case MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG ...
> + MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG + 3:
> + ret = pci_host_data_le_ops.read(PCI_HOST_BRIDGE(&s->pci[1]),
> + addr - MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, size);
> + break;
> + case MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG:
> + /* FIXME: Should this be sent via the PCI bus somehow? */
> + if (s->gpp_int_level && (s->gpp_value & BIT(31))) {
> + ret = pic_read_irq(isa_pic);
> + }
> + break;
> + case MV64340_MAIN_INTERRUPT_CAUSE_LOW:
> + ret = s->main_int_cr;
> + break;
> + case MV64340_MAIN_INTERRUPT_CAUSE_HIGH:
> + ret = s->main_int_cr >> 32;
> + break;
> + case MV64340_CPU_INTERRUPT0_MASK_LOW:
> + ret = s->cpu0_int_mask;
> + break;
> + case MV64340_CPU_INTERRUPT0_MASK_HIGH:
> + ret = s->cpu0_int_mask >> 32;
> + break;
> + case MV64340_CPU_INTERRUPT0_SELECT_CAUSE:
> + ret = s->main_int_cr;
> + if (s->main_int_cr & s->cpu0_int_mask) {
> + if (!(s->main_int_cr & s->cpu0_int_mask & 0xffffffff)) {
> + ret = s->main_int_cr >> 32 | BIT(30);
> + } else if ((s->main_int_cr & s->cpu0_int_mask) >> 32) {
> + ret |= BIT(31);
> + }
> + }
> + break;
> + case MV64340_CUNIT_ARBITER_CONTROL_REG:
> + ret = 0x11ff0000 | (s->gpp_int_level << 10);
> + break;
> + case MV64340_GPP_IO_CONTROL:
> + ret = s->gpp_io;
> + break;
> + case MV64340_GPP_LEVEL_CONTROL:
> + ret = s->gpp_level;
> + break;
> + case MV64340_GPP_VALUE:
> + ret = s->gpp_value;
> + break;
> + case MV64340_GPP_VALUE_SET:
> + case MV64340_GPP_VALUE_CLEAR:
> + ret = 0;
> + break;
> + case MV64340_GPP_INTERRUPT_CAUSE:
> + ret = s->gpp_int_cr;
> + break;
> + case MV64340_GPP_INTERRUPT_MASK0:
> + case MV64340_GPP_INTERRUPT_MASK1:
> + ret = s->gpp_int_mask;
> + break;
> + default:
> + qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register read 0x%"
> + HWADDR_PRIx "\n", __func__, addr);
> + break;
> + }
> + if (addr != MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG) {
> + trace_mv64361_reg_read(addr, ret);
> + }
> + return ret;
> +}
> +
> +static void warn_swap_bit(uint64_t val)
> +{
> + if ((val & 0x3000000ULL) >> 24 != 1) {
> + qemu_log_mask(LOG_UNIMP, "%s: Data swap not implemented", __func__);
> + }
> +}
> +
> +static void mv64361_set_pci_mem_remap(MV64361State *s, int bus, int idx,
> + uint64_t val, bool high)
> +{
> + if (high) {
> + s->pci[bus].remap[idx] = val;
> + } else {
> + s->pci[bus].remap[idx] &= 0xffffffff00000000ULL;
> + s->pci[bus].remap[idx] |= (val & 0xffffULL) << 16;
> + }
> +}
> +
> +static void mv64361_write(void *opaque, hwaddr addr, uint64_t val,
> + unsigned int size)
> +{
> + MV64361State *s = MV64361(opaque);
> +
> + trace_mv64361_reg_write(addr, val);
> + switch (addr) {
> + case MV64340_CPU_CONFIG:
> + s->cpu_conf = val & 0xe4e3bffULL;
> + s->cpu_conf |= BIT(23);
> + break;
> + case MV64340_PCI_0_IO_BASE_ADDR:
> + s->pci[0].io_base = val & 0x30fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + s->pci[0].remap[4] = (val & 0xffffULL) << 16;
> + }
> + break;
> + case MV64340_PCI_0_IO_SIZE:
> + s->pci[0].io_size = val & 0xffffULL;
> + break;
> + case MV64340_PCI_0_IO_ADDR_REMAP:
> + s->pci[0].remap[4] = (val & 0xffffULL) << 16;
> + break;
> + case MV64340_PCI_0_MEMORY0_BASE_ADDR:
> + s->pci[0].mem_base[0] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 0, 0, val, false);
> + }
> + break;
> + case MV64340_PCI_0_MEMORY0_SIZE:
> + s->pci[0].mem_size[0] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP:
> + case MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 0, 0, val,
> + (addr == MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_0_MEMORY1_BASE_ADDR:
> + s->pci[0].mem_base[1] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 0, 1, val, false);
> + }
> + break;
> + case MV64340_PCI_0_MEMORY1_SIZE:
> + s->pci[0].mem_size[1] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP:
> + case MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 0, 1, val,
> + (addr == MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_0_MEMORY2_BASE_ADDR:
> + s->pci[0].mem_base[2] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 0, 2, val, false);
> + }
> + break;
> + case MV64340_PCI_0_MEMORY2_SIZE:
> + s->pci[0].mem_size[2] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP:
> + case MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 0, 2, val,
> + (addr == MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_0_MEMORY3_BASE_ADDR:
> + s->pci[0].mem_base[3] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 0, 3, val, false);
> + }
> + break;
> + case MV64340_PCI_0_MEMORY3_SIZE:
> + s->pci[0].mem_size[3] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP:
> + case MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 0, 3, val,
> + (addr == MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_1_IO_BASE_ADDR:
> + s->pci[1].io_base = val & 0x30fffffULL;
> + warn_swap_bit(val);
> + break;
> + if (!(s->cpu_conf & BIT(27))) {
> + s->pci[1].remap[4] = (val & 0xffffULL) << 16;
> + }
> + break;
> + case MV64340_PCI_1_IO_SIZE:
> + s->pci[1].io_size = val & 0xffffULL;
> + break;
> + case MV64340_PCI_1_MEMORY0_BASE_ADDR:
> + s->pci[1].mem_base[0] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 1, 0, val, false);
> + }
> + break;
> + case MV64340_PCI_1_MEMORY0_SIZE:
> + s->pci[1].mem_size[0] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP:
> + case MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 1, 0, val,
> + (addr == MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_1_MEMORY1_BASE_ADDR:
> + s->pci[1].mem_base[1] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 1, 1, val, false);
> + }
> + break;
> + case MV64340_PCI_1_MEMORY1_SIZE:
> + s->pci[1].mem_size[1] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP:
> + case MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 1, 1, val,
> + (addr == MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_1_MEMORY2_BASE_ADDR:
> + s->pci[1].mem_base[2] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 1, 2, val, false);
> + }
> + break;
> + case MV64340_PCI_1_MEMORY2_SIZE:
> + s->pci[1].mem_size[2] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP:
> + case MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 1, 2, val,
> + (addr == MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_PCI_1_MEMORY3_BASE_ADDR:
> + s->pci[1].mem_base[3] = val & 0x70fffffULL;
> + warn_swap_bit(val);
> + if (!(s->cpu_conf & BIT(27))) {
> + mv64361_set_pci_mem_remap(s, 1, 3, val, false);
> + }
> + break;
> + case MV64340_PCI_1_MEMORY3_SIZE:
> + s->pci[1].mem_size[3] = val & 0xffffULL;
> + break;
> + case MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP:
> + case MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP:
> + mv64361_set_pci_mem_remap(s, 1, 3, val,
> + (addr == MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP));
> + break;
> + case MV64340_INTERNAL_SPACE_BASE_ADDR:
> + s->regs_base = val & 0xfffffULL;
> + break;
> + case MV64340_BASE_ADDR_ENABLE:
> + setup_mem_windows(s, val);
> + s->base_addr_enable = val & 0x1fffffULL;
> + break;
> + case MV64340_PCI_0_CONFIG_ADDR:
> + pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(&s->pci[0]), 0, val, size);
> + break;
> + case MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG ...
> + MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG + 3:
> + pci_host_data_le_ops.write(PCI_HOST_BRIDGE(&s->pci[0]),
> + addr - MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG, val, size);
> + break;
> + case MV64340_PCI_1_CONFIG_ADDR:
> + pci_host_conf_le_ops.write(PCI_HOST_BRIDGE(&s->pci[1]), 0, val, size);
> + break;
> + case MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG ...
> + MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG + 3:
> + pci_host_data_le_ops.write(PCI_HOST_BRIDGE(&s->pci[1]),
> + addr - MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG, val, size);
> + break;
> + case MV64340_CPU_INTERRUPT0_MASK_LOW:
> + s->cpu0_int_mask &= 0xffffffff00000000ULL;
> + s->cpu0_int_mask |= val & 0xffffffffULL;
> + break;
> + case MV64340_CPU_INTERRUPT0_MASK_HIGH:
> + s->cpu0_int_mask &= 0xffffffffULL;
> + s->cpu0_int_mask |= val << 32;
> + break;
> + case MV64340_CUNIT_ARBITER_CONTROL_REG:
> + s->gpp_int_level = !!(val & BIT(10));
> + break;
> + case MV64340_GPP_IO_CONTROL:
> + s->gpp_io = val;
> + break;
> + case MV64340_GPP_LEVEL_CONTROL:
> + s->gpp_level = val;
> + break;
> + case MV64340_GPP_VALUE:
> + s->gpp_value &= ~s->gpp_io;
> + s->gpp_value |= val & s->gpp_io;
> + break;
> + case MV64340_GPP_VALUE_SET:
> + s->gpp_value |= val & s->gpp_io;
> + break;
> + case MV64340_GPP_VALUE_CLEAR:
> + s->gpp_value &= ~(val & s->gpp_io);
> + break;
> + case MV64340_GPP_INTERRUPT_CAUSE:
> + if (!s->gpp_int_level && val != s->gpp_int_cr) {
> + int i;
> + uint32_t ch = s->gpp_int_cr ^ val;
> + s->gpp_int_cr = val;
> + for (i = 0; i < 4; i++) {
> + if ((ch & 0xff << i) && !(val & 0xff << i)) {
> + mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + i, 0);
> + }
> + }
> + } else {
> + s->gpp_int_cr = val;
> + }
> + break;
> + case MV64340_GPP_INTERRUPT_MASK0:
> + case MV64340_GPP_INTERRUPT_MASK1:
> + s->gpp_int_mask = val;
> + break;
> + default:
> + qemu_log_mask(LOG_UNIMP, "%s: Unimplemented register write 0x%"
> + HWADDR_PRIx " = %"PRIx64"\n", __func__, addr, val);
> + break;
> + }
> +}
> +
> +static const MemoryRegionOps mv64361_ops = {
> + .read = mv64361_read,
> + .write = mv64361_write,
> + .valid.min_access_size = 1,
> + .valid.max_access_size = 4,
> + .endianness = DEVICE_LITTLE_ENDIAN,
> +};
> +
> +static void mv64361_gpp_irq(void *opaque, int n, int level)
> +{
> + MV64361State *s = opaque;
> + uint32_t mask = BIT(n);
> + uint32_t val = s->gpp_value & ~mask;
> +
> + if (s->gpp_level & mask) {
> + level = !level;
> + }
> + val |= level << n;
> + if (val > s->gpp_value) {
> + s->gpp_value = val;
> + s->gpp_int_cr |= mask;
> + if (s->gpp_int_mask & mask) {
> + mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + n / 8, 1);
> + }
> + } else if (val < s->gpp_value) {
> + int b = n / 8;
> + s->gpp_value = val;
> + if (s->gpp_int_level && !(val & 0xff << b)) {
> + mv64361_update_irq(opaque, MV64361_IRQ_P0_GPP0_7 + b, 0);
> + }
> + }
> +}
> +
> +static void mv64361_realize(DeviceState *dev, Error **errp)
> +{
> + MV64361State *s = MV64361(dev);
> + int i;
> +
> + s->base_addr_enable = 0x1fffff;
> + memory_region_init_io(&s->regs, OBJECT(s), &mv64361_ops, s,
> + TYPE_MV64361, 0x10000);
> + for (i = 0; i < 2; i++) {
> + char *name = g_strdup_printf("pcihost%d", i);
> + object_initialize_child(OBJECT(dev), name, &s->pci[i],
> + TYPE_MV64361_PCI);
> + g_free(name);
> + DeviceState *pci = DEVICE(&s->pci[i]);
> + qdev_prop_set_uint8(pci, "index", i);
> + sysbus_realize_and_unref(SYS_BUS_DEVICE(pci), &error_fatal);
> + }
> + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->cpu_irq);
> + qdev_init_gpio_in_named(dev, mv64361_gpp_irq, "gpp", 32);
> + /* FIXME: PCI IRQ connections may be board specific */
> + for (i = 0; i < PCI_NUM_PINS; i++) {
> + s->pci[1].irq[i] = qdev_get_gpio_in_named(dev, "gpp", 12 + i);
> + }
> +}
> +
> +static void mv64361_reset(DeviceState *dev)
> +{
> + MV64361State *s = MV64361(dev);
> + int i, j;
> +
> + /*
> + * These values may be board specific
> + * Real chip supports init from an eprom but that's not modelled
> + */
> + setup_mem_windows(s, 0x1fffff);
> + s->base_addr_enable = 0x1fffff;
> + s->cpu_conf = 0x28000ff;
> + s->regs_base = 0x100f100;
> + s->pci[0].io_base = 0x100f800;
> + s->pci[0].io_size = 0xff;
> + s->pci[0].mem_base[0] = 0x100c000;
> + s->pci[0].mem_size[0] = 0x1fff;
> + s->pci[0].mem_base[1] = 0x100f900;
> + s->pci[0].mem_size[1] = 0xff;
> + s->pci[0].mem_base[2] = 0x100f400;
> + s->pci[0].mem_size[2] = 0x1ff;
> + s->pci[0].mem_base[3] = 0x100f600;
> + s->pci[0].mem_size[3] = 0x1ff;
> + s->pci[1].io_base = 0x100fe00;
> + s->pci[1].io_size = 0xff;
> + s->pci[1].mem_base[0] = 0x1008000;
> + s->pci[1].mem_size[0] = 0x3fff;
> + s->pci[1].mem_base[1] = 0x100fd00;
> + s->pci[1].mem_size[1] = 0xff;
> + s->pci[1].mem_base[2] = 0x1002600;
> + s->pci[1].mem_size[2] = 0x1ff;
> + s->pci[1].mem_base[3] = 0x100ff80;
> + s->pci[1].mem_size[3] = 0x7f;
> + for (i = 0; i < 2; i++) {
> + for (j = 0; j < 4; j++) {
> + s->pci[i].remap[j] = s->pci[i].mem_base[j] << 16;
> + }
> + }
> + s->pci[0].remap[1] = 0;
> + s->pci[1].remap[1] = 0;
> + setup_mem_windows(s, 0xfbfff);
> + s->base_addr_enable = 0xfbfff;
> +}
> +
> +static void mv64361_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->realize = mv64361_realize;
> + dc->reset = mv64361_reset;
> +}
> +
> +static const TypeInfo mv64361_type_info = {
> + .name = TYPE_MV64361,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(MV64361State),
> + .class_init = mv64361_class_init,
> +};
> +
> +static void mv64361_register_types(void)
> +{
> + type_register_static(&mv64361_type_info);
> +}
> +
> +type_init(mv64361_register_types)
> diff --git a/hw/pci-host/mv643xx.h b/hw/pci-host/mv643xx.h
> new file mode 100644
> index 0000000000..8750675971
> --- /dev/null
> +++ b/hw/pci-host/mv643xx.h
> @@ -0,0 +1,919 @@
> +/*
> + * mv643xx.h - MV-643XX Internal registers definition file.
> + *
> + * Copyright 2002 Momentum Computer, Inc.
> + * Author: Matthew Dharm <mdharm@momenco.com>
> + * Copyright 2002 GALILEO TECHNOLOGY, LTD.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +#ifndef __ASM_MV643XX_H
> +#define __ASM_MV643XX_H
> +
> +/****************************************/
> +/* Processor Address Space */
> +/****************************************/
> +
> +/* DDR SDRAM BAR and size registers */
> +
> +#define MV64340_CS_0_BASE_ADDR 0x008
> +#define MV64340_CS_0_SIZE 0x010
> +#define MV64340_CS_1_BASE_ADDR 0x208
> +#define MV64340_CS_1_SIZE 0x210
> +#define MV64340_CS_2_BASE_ADDR 0x018
> +#define MV64340_CS_2_SIZE 0x020
> +#define MV64340_CS_3_BASE_ADDR 0x218
> +#define MV64340_CS_3_SIZE 0x220
> +
> +/* Devices BAR and size registers */
> +
> +#define MV64340_DEV_CS0_BASE_ADDR 0x028
> +#define MV64340_DEV_CS0_SIZE 0x030
> +#define MV64340_DEV_CS1_BASE_ADDR 0x228
> +#define MV64340_DEV_CS1_SIZE 0x230
> +#define MV64340_DEV_CS2_BASE_ADDR 0x248
> +#define MV64340_DEV_CS2_SIZE 0x250
> +#define MV64340_DEV_CS3_BASE_ADDR 0x038
> +#define MV64340_DEV_CS3_SIZE 0x040
> +#define MV64340_BOOTCS_BASE_ADDR 0x238
> +#define MV64340_BOOTCS_SIZE 0x240
> +
> +/* PCI 0 BAR and size registers */
> +
> +#define MV64340_PCI_0_IO_BASE_ADDR 0x048
> +#define MV64340_PCI_0_IO_SIZE 0x050
> +#define MV64340_PCI_0_MEMORY0_BASE_ADDR 0x058
> +#define MV64340_PCI_0_MEMORY0_SIZE 0x060
> +#define MV64340_PCI_0_MEMORY1_BASE_ADDR 0x080
> +#define MV64340_PCI_0_MEMORY1_SIZE 0x088
> +#define MV64340_PCI_0_MEMORY2_BASE_ADDR 0x258
> +#define MV64340_PCI_0_MEMORY2_SIZE 0x260
> +#define MV64340_PCI_0_MEMORY3_BASE_ADDR 0x280
> +#define MV64340_PCI_0_MEMORY3_SIZE 0x288
> +
> +/* PCI 1 BAR and size registers */
> +#define MV64340_PCI_1_IO_BASE_ADDR 0x090
> +#define MV64340_PCI_1_IO_SIZE 0x098
> +#define MV64340_PCI_1_MEMORY0_BASE_ADDR 0x0a0
> +#define MV64340_PCI_1_MEMORY0_SIZE 0x0a8
> +#define MV64340_PCI_1_MEMORY1_BASE_ADDR 0x0b0
> +#define MV64340_PCI_1_MEMORY1_SIZE 0x0b8
> +#define MV64340_PCI_1_MEMORY2_BASE_ADDR 0x2a0
> +#define MV64340_PCI_1_MEMORY2_SIZE 0x2a8
> +#define MV64340_PCI_1_MEMORY3_BASE_ADDR 0x2b0
> +#define MV64340_PCI_1_MEMORY3_SIZE 0x2b8
> +
> +/* SRAM base address */
> +#define MV64340_INTEGRATED_SRAM_BASE_ADDR 0x268
> +
> +/* internal registers space base address */
> +#define MV64340_INTERNAL_SPACE_BASE_ADDR 0x068
> +
> +/* Enables the CS , DEV_CS , PCI 0 and PCI 1
> + windows above */
> +#define MV64340_BASE_ADDR_ENABLE 0x278
> +
> +/****************************************/
> +/* PCI remap registers */
> +/****************************************/
> + /* PCI 0 */
> +#define MV64340_PCI_0_IO_ADDR_REMAP 0x0f0
> +#define MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP 0x0f8
> +#define MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP 0x320
> +#define MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP 0x100
> +#define MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP 0x328
> +#define MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP 0x2f8
> +#define MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP 0x330
> +#define MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP 0x300
> +#define MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP 0x338
> + /* PCI 1 */
> +#define MV64340_PCI_1_IO_ADDR_REMAP 0x108
> +#define MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP 0x110
> +#define MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP 0x340
> +#define MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP 0x118
> +#define MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP 0x348
> +#define MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP 0x310
> +#define MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP 0x350
> +#define MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP 0x318
> +#define MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP 0x358
> +
> +#define MV64340_CPU_PCI_0_HEADERS_RETARGET_CONTROL 0x3b0
> +#define MV64340_CPU_PCI_0_HEADERS_RETARGET_BASE 0x3b8
> +#define MV64340_CPU_PCI_1_HEADERS_RETARGET_CONTROL 0x3c0
> +#define MV64340_CPU_PCI_1_HEADERS_RETARGET_BASE 0x3c8
> +#define MV64340_CPU_GE_HEADERS_RETARGET_CONTROL 0x3d0
> +#define MV64340_CPU_GE_HEADERS_RETARGET_BASE 0x3d8
> +#define MV64340_CPU_IDMA_HEADERS_RETARGET_CONTROL 0x3e0
> +#define MV64340_CPU_IDMA_HEADERS_RETARGET_BASE 0x3e8
> +
> +/****************************************/
> +/* CPU Control Registers */
> +/****************************************/
> +
> +#define MV64340_CPU_CONFIG 0x000
> +#define MV64340_CPU_MODE 0x120
> +#define MV64340_CPU_MASTER_CONTROL 0x160
> +#define MV64340_CPU_CROSS_BAR_CONTROL_LOW 0x150
> +#define MV64340_CPU_CROSS_BAR_CONTROL_HIGH 0x158
> +#define MV64340_CPU_CROSS_BAR_TIMEOUT 0x168
> +
> +/****************************************/
> +/* SMP RegisterS */
> +/****************************************/
> +
> +#define MV64340_SMP_WHO_AM_I 0x200
> +#define MV64340_SMP_CPU0_DOORBELL 0x214
> +#define MV64340_SMP_CPU0_DOORBELL_CLEAR 0x21C
> +#define MV64340_SMP_CPU1_DOORBELL 0x224
> +#define MV64340_SMP_CPU1_DOORBELL_CLEAR 0x22C
> +#define MV64340_SMP_CPU0_DOORBELL_MASK 0x234
> +#define MV64340_SMP_CPU1_DOORBELL_MASK 0x23C
> +#define MV64340_SMP_SEMAPHOR0 0x244
> +#define MV64340_SMP_SEMAPHOR1 0x24c
> +#define MV64340_SMP_SEMAPHOR2 0x254
> +#define MV64340_SMP_SEMAPHOR3 0x25c
> +#define MV64340_SMP_SEMAPHOR4 0x264
> +#define MV64340_SMP_SEMAPHOR5 0x26c
> +#define MV64340_SMP_SEMAPHOR6 0x274
> +#define MV64340_SMP_SEMAPHOR7 0x27c
> +
> +/****************************************/
> +/* CPU Sync Barrier Register */
> +/****************************************/
> +
> +#define MV64340_CPU_0_SYNC_BARRIER_TRIGGER 0x0c0
> +#define MV64340_CPU_0_SYNC_BARRIER_VIRTUAL 0x0c8
> +#define MV64340_CPU_1_SYNC_BARRIER_TRIGGER 0x0d0
> +#define MV64340_CPU_1_SYNC_BARRIER_VIRTUAL 0x0d8
> +
> +/****************************************/
> +/* CPU Access Protect */
> +/****************************************/
> +
> +#define MV64340_CPU_PROTECT_WINDOW_0_BASE_ADDR 0x180
> +#define MV64340_CPU_PROTECT_WINDOW_0_SIZE 0x188
> +#define MV64340_CPU_PROTECT_WINDOW_1_BASE_ADDR 0x190
> +#define MV64340_CPU_PROTECT_WINDOW_1_SIZE 0x198
> +#define MV64340_CPU_PROTECT_WINDOW_2_BASE_ADDR 0x1a0
> +#define MV64340_CPU_PROTECT_WINDOW_2_SIZE 0x1a8
> +#define MV64340_CPU_PROTECT_WINDOW_3_BASE_ADDR 0x1b0
> +#define MV64340_CPU_PROTECT_WINDOW_3_SIZE 0x1b8
> +
> +
> +/****************************************/
> +/* CPU Error Report */
> +/****************************************/
> +
> +#define MV64340_CPU_ERROR_ADDR_LOW 0x070
> +#define MV64340_CPU_ERROR_ADDR_HIGH 0x078
> +#define MV64340_CPU_ERROR_DATA_LOW 0x128
> +#define MV64340_CPU_ERROR_DATA_HIGH 0x130
> +#define MV64340_CPU_ERROR_PARITY 0x138
> +#define MV64340_CPU_ERROR_CAUSE 0x140
> +#define MV64340_CPU_ERROR_MASK 0x148
> +
> +/****************************************/
> +/* CPU Interface Debug Registers */
> +/****************************************/
> +
> +#define MV64340_PUNIT_SLAVE_DEBUG_LOW 0x360
> +#define MV64340_PUNIT_SLAVE_DEBUG_HIGH 0x368
> +#define MV64340_PUNIT_MASTER_DEBUG_LOW 0x370
> +#define MV64340_PUNIT_MASTER_DEBUG_HIGH 0x378
> +#define MV64340_PUNIT_MMASK 0x3e4
> +
> +/****************************************/
> +/* Integrated SRAM Registers */
> +/****************************************/
> +
> +#define MV64340_SRAM_CONFIG 0x380
> +#define MV64340_SRAM_TEST_MODE 0X3F4
> +#define MV64340_SRAM_ERROR_CAUSE 0x388
> +#define MV64340_SRAM_ERROR_ADDR 0x390
> +#define MV64340_SRAM_ERROR_ADDR_HIGH 0X3F8
> +#define MV64340_SRAM_ERROR_DATA_LOW 0x398
> +#define MV64340_SRAM_ERROR_DATA_HIGH 0x3a0
> +#define MV64340_SRAM_ERROR_DATA_PARITY 0x3a8
> +
> +/****************************************/
> +/* SDRAM Configuration */
> +/****************************************/
> +
> +#define MV64340_SDRAM_CONFIG 0x1400
> +#define MV64340_D_UNIT_CONTROL_LOW 0x1404
> +#define MV64340_D_UNIT_CONTROL_HIGH 0x1424
> +#define MV64340_SDRAM_TIMING_CONTROL_LOW 0x1408
> +#define MV64340_SDRAM_TIMING_CONTROL_HIGH 0x140c
> +#define MV64340_SDRAM_ADDR_CONTROL 0x1410
> +#define MV64340_SDRAM_OPEN_PAGES_CONTROL 0x1414
> +#define MV64340_SDRAM_OPERATION 0x1418
> +#define MV64340_SDRAM_MODE 0x141c
> +#define MV64340_EXTENDED_DRAM_MODE 0x1420
> +#define MV64340_SDRAM_CROSS_BAR_CONTROL_LOW 0x1430
> +#define MV64340_SDRAM_CROSS_BAR_CONTROL_HIGH 0x1434
> +#define MV64340_SDRAM_CROSS_BAR_TIMEOUT 0x1438
> +#define MV64340_SDRAM_ADDR_CTRL_PADS_CALIBRATION 0x14c0
> +#define MV64340_SDRAM_DATA_PADS_CALIBRATION 0x14c4
> +
> +/****************************************/
> +/* SDRAM Error Report */
> +/****************************************/
> +
> +#define MV64340_SDRAM_ERROR_DATA_LOW 0x1444
> +#define MV64340_SDRAM_ERROR_DATA_HIGH 0x1440
> +#define MV64340_SDRAM_ERROR_ADDR 0x1450
> +#define MV64340_SDRAM_RECEIVED_ECC 0x1448
> +#define MV64340_SDRAM_CALCULATED_ECC 0x144c
> +#define MV64340_SDRAM_ECC_CONTROL 0x1454
> +#define MV64340_SDRAM_ECC_ERROR_COUNTER 0x1458
> +
> +/******************************************/
> +/* Controlled Delay Line (CDL) Registers */
> +/******************************************/
> +
> +#define MV64340_DFCDL_CONFIG0 0x1480
> +#define MV64340_DFCDL_CONFIG1 0x1484
> +#define MV64340_DLL_WRITE 0x1488
> +#define MV64340_DLL_READ 0x148c
> +#define MV64340_SRAM_ADDR 0x1490
> +#define MV64340_SRAM_DATA0 0x1494
> +#define MV64340_SRAM_DATA1 0x1498
> +#define MV64340_SRAM_DATA2 0x149c
> +#define MV64340_DFCL_PROBE 0x14a0
> +
> +/******************************************/
> +/* Debug Registers */
> +/******************************************/
> +
> +#define MV64340_DUNIT_DEBUG_LOW 0x1460
> +#define MV64340_DUNIT_DEBUG_HIGH 0x1464
> +#define MV64340_DUNIT_MMASK 0X1b40
> +
> +/****************************************/
> +/* Device Parameters */
> +/****************************************/
> +
> +#define MV64340_DEVICE_BANK0_PARAMETERS 0x45c
> +#define MV64340_DEVICE_BANK1_PARAMETERS 0x460
> +#define MV64340_DEVICE_BANK2_PARAMETERS 0x464
> +#define MV64340_DEVICE_BANK3_PARAMETERS 0x468
> +#define MV64340_DEVICE_BOOT_BANK_PARAMETERS 0x46c
> +#define MV64340_DEVICE_INTERFACE_CONTROL 0x4c0
> +#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW 0x4c8
> +#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH 0x4cc
> +#define MV64340_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT 0x4c4
> +
> +/****************************************/
> +/* Device interrupt registers */
> +/****************************************/
> +
> +#define MV64340_DEVICE_INTERRUPT_CAUSE 0x4d0
> +#define MV64340_DEVICE_INTERRUPT_MASK 0x4d4
> +#define MV64340_DEVICE_ERROR_ADDR 0x4d8
> +#define MV64340_DEVICE_ERROR_DATA 0x4dc
> +#define MV64340_DEVICE_ERROR_PARITY 0x4e0
> +
> +/****************************************/
> +/* Device debug registers */
> +/****************************************/
> +
> +#define MV64340_DEVICE_DEBUG_LOW 0x4e4
> +#define MV64340_DEVICE_DEBUG_HIGH 0x4e8
> +#define MV64340_RUNIT_MMASK 0x4f0
> +
> +/****************************************/
> +/* PCI Slave Address Decoding registers */
> +/****************************************/
> +
> +#define MV64340_PCI_0_CS_0_BANK_SIZE 0xc08
> +#define MV64340_PCI_1_CS_0_BANK_SIZE 0xc88
> +#define MV64340_PCI_0_CS_1_BANK_SIZE 0xd08
> +#define MV64340_PCI_1_CS_1_BANK_SIZE 0xd88
> +#define MV64340_PCI_0_CS_2_BANK_SIZE 0xc0c
> +#define MV64340_PCI_1_CS_2_BANK_SIZE 0xc8c
> +#define MV64340_PCI_0_CS_3_BANK_SIZE 0xd0c
> +#define MV64340_PCI_1_CS_3_BANK_SIZE 0xd8c
> +#define MV64340_PCI_0_DEVCS_0_BANK_SIZE 0xc10
> +#define MV64340_PCI_1_DEVCS_0_BANK_SIZE 0xc90
> +#define MV64340_PCI_0_DEVCS_1_BANK_SIZE 0xd10
> +#define MV64340_PCI_1_DEVCS_1_BANK_SIZE 0xd90
> +#define MV64340_PCI_0_DEVCS_2_BANK_SIZE 0xd18
> +#define MV64340_PCI_1_DEVCS_2_BANK_SIZE 0xd98
> +#define MV64340_PCI_0_DEVCS_3_BANK_SIZE 0xc14
> +#define MV64340_PCI_1_DEVCS_3_BANK_SIZE 0xc94
> +#define MV64340_PCI_0_DEVCS_BOOT_BANK_SIZE 0xd14
> +#define MV64340_PCI_1_DEVCS_BOOT_BANK_SIZE 0xd94
> +#define MV64340_PCI_0_P2P_MEM0_BAR_SIZE 0xd1c
> +#define MV64340_PCI_1_P2P_MEM0_BAR_SIZE 0xd9c
> +#define MV64340_PCI_0_P2P_MEM1_BAR_SIZE 0xd20
> +#define MV64340_PCI_1_P2P_MEM1_BAR_SIZE 0xda0
> +#define MV64340_PCI_0_P2P_I_O_BAR_SIZE 0xd24
> +#define MV64340_PCI_1_P2P_I_O_BAR_SIZE 0xda4
> +#define MV64340_PCI_0_CPU_BAR_SIZE 0xd28
> +#define MV64340_PCI_1_CPU_BAR_SIZE 0xda8
> +#define MV64340_PCI_0_INTERNAL_SRAM_BAR_SIZE 0xe00
> +#define MV64340_PCI_1_INTERNAL_SRAM_BAR_SIZE 0xe80
> +#define MV64340_PCI_0_EXPANSION_ROM_BAR_SIZE 0xd2c
> +#define MV64340_PCI_1_EXPANSION_ROM_BAR_SIZE 0xd9c
> +#define MV64340_PCI_0_BASE_ADDR_REG_ENABLE 0xc3c
> +#define MV64340_PCI_1_BASE_ADDR_REG_ENABLE 0xcbc
> +#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP 0xc48
> +#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP 0xcc8
> +#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP 0xd48
> +#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP 0xdc8
> +#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP 0xc4c
> +#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP 0xccc
> +#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP 0xd4c
> +#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP 0xdcc
> +#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP 0xF04
> +#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP 0xF84
> +#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP 0xF08
> +#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP 0xF88
> +#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP 0xF0C
> +#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP 0xF8C
> +#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP 0xF10
> +#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP 0xF90
> +#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP 0xc50
> +#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP 0xcd0
> +#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP 0xd50
> +#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP 0xdd0
> +#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP 0xd58
> +#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP 0xdd8
> +#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP 0xc54
> +#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP 0xcd4
> +#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xd54
> +#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP 0xdd4
> +#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xd5c
> +#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW 0xddc
> +#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xd60
> +#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH 0xde0
> +#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xd64
> +#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW 0xde4
> +#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xd68
> +#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH 0xde8
> +#define MV64340_PCI_0_P2P_I_O_BASE_ADDR_REMAP 0xd6c
> +#define MV64340_PCI_1_P2P_I_O_BASE_ADDR_REMAP 0xdec
> +#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_LOW 0xd70
> +#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_LOW 0xdf0
> +#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_HIGH 0xd74
> +#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_HIGH 0xdf4
> +#define MV64340_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf00
> +#define MV64340_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP 0xf80
> +#define MV64340_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP 0xf38
> +#define MV64340_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP 0xfb8
> +#define MV64340_PCI_0_ADDR_DECODE_CONTROL 0xd3c
> +#define MV64340_PCI_1_ADDR_DECODE_CONTROL 0xdbc
> +#define MV64340_PCI_0_HEADERS_RETARGET_CONTROL 0xF40
> +#define MV64340_PCI_1_HEADERS_RETARGET_CONTROL 0xFc0
> +#define MV64340_PCI_0_HEADERS_RETARGET_BASE 0xF44
> +#define MV64340_PCI_1_HEADERS_RETARGET_BASE 0xFc4
> +#define MV64340_PCI_0_HEADERS_RETARGET_HIGH 0xF48
> +#define MV64340_PCI_1_HEADERS_RETARGET_HIGH 0xFc8
> +
> +/***********************************/
> +/* PCI Control Register Map */
> +/***********************************/
> +
> +#define MV64340_PCI_0_DLL_STATUS_AND_COMMAND 0x1d20
> +#define MV64340_PCI_1_DLL_STATUS_AND_COMMAND 0x1da0
> +#define MV64340_PCI_0_MPP_PADS_DRIVE_CONTROL 0x1d1C
> +#define MV64340_PCI_1_MPP_PADS_DRIVE_CONTROL 0x1d9C
> +#define MV64340_PCI_0_COMMAND 0xc00
> +#define MV64340_PCI_1_COMMAND 0xc80
> +#define MV64340_PCI_0_MODE 0xd00
> +#define MV64340_PCI_1_MODE 0xd80
> +#define MV64340_PCI_0_RETRY 0xc04
> +#define MV64340_PCI_1_RETRY 0xc84
> +#define MV64340_PCI_0_READ_BUFFER_DISCARD_TIMER 0xd04
> +#define MV64340_PCI_1_READ_BUFFER_DISCARD_TIMER 0xd84
> +#define MV64340_PCI_0_MSI_TRIGGER_TIMER 0xc38
> +#define MV64340_PCI_1_MSI_TRIGGER_TIMER 0xcb8
> +#define MV64340_PCI_0_ARBITER_CONTROL 0x1d00
> +#define MV64340_PCI_1_ARBITER_CONTROL 0x1d80
> +#define MV64340_PCI_0_CROSS_BAR_CONTROL_LOW 0x1d08
> +#define MV64340_PCI_1_CROSS_BAR_CONTROL_LOW 0x1d88
> +#define MV64340_PCI_0_CROSS_BAR_CONTROL_HIGH 0x1d0c
> +#define MV64340_PCI_1_CROSS_BAR_CONTROL_HIGH 0x1d8c
> +#define MV64340_PCI_0_CROSS_BAR_TIMEOUT 0x1d04
> +#define MV64340_PCI_1_CROSS_BAR_TIMEOUT 0x1d84
> +#define MV64340_PCI_0_SYNC_BARRIER_TRIGGER_REG 0x1D18
> +#define MV64340_PCI_1_SYNC_BARRIER_TRIGGER_REG 0x1D98
> +#define MV64340_PCI_0_SYNC_BARRIER_VIRTUAL_REG 0x1d10
> +#define MV64340_PCI_1_SYNC_BARRIER_VIRTUAL_REG 0x1d90
> +#define MV64340_PCI_0_P2P_CONFIG 0x1d14
> +#define MV64340_PCI_1_P2P_CONFIG 0x1d94
> +
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_LOW 0x1e00
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_HIGH 0x1e04
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_0 0x1e08
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_LOW 0x1e10
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_HIGH 0x1e14
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_1 0x1e18
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_LOW 0x1e20
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_HIGH 0x1e24
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_2 0x1e28
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_LOW 0x1e30
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_HIGH 0x1e34
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_3 0x1e38
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_LOW 0x1e40
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_HIGH 0x1e44
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_4 0x1e48
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_LOW 0x1e50
> +#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_HIGH 0x1e54
> +#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_5 0x1e58
> +
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_LOW 0x1e80
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_HIGH 0x1e84
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_0 0x1e88
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_LOW 0x1e90
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_HIGH 0x1e94
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_1 0x1e98
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_LOW 0x1ea0
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_HIGH 0x1ea4
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_2 0x1ea8
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_LOW 0x1eb0
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_HIGH 0x1eb4
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_3 0x1eb8
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_LOW 0x1ec0
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_HIGH 0x1ec4
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_4 0x1ec8
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_LOW 0x1ed0
> +#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_HIGH 0x1ed4
> +#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_5 0x1ed8
> +
> +/****************************************/
> +/* PCI Configuration Access Registers */
> +/****************************************/
> +
> +#define MV64340_PCI_0_CONFIG_ADDR 0xcf8
> +#define MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG 0xcfc
> +#define MV64340_PCI_1_CONFIG_ADDR 0xc78
> +#define MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG 0xc7c
> +#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xc34
> +#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG 0xcb4
> +
> +/****************************************/
> +/* PCI Error Report Registers */
> +/****************************************/
> +
> +#define MV64340_PCI_0_SERR_MASK 0xc28
> +#define MV64340_PCI_1_SERR_MASK 0xca8
> +#define MV64340_PCI_0_ERROR_ADDR_LOW 0x1d40
> +#define MV64340_PCI_1_ERROR_ADDR_LOW 0x1dc0
> +#define MV64340_PCI_0_ERROR_ADDR_HIGH 0x1d44
> +#define MV64340_PCI_1_ERROR_ADDR_HIGH 0x1dc4
> +#define MV64340_PCI_0_ERROR_ATTRIBUTE 0x1d48
> +#define MV64340_PCI_1_ERROR_ATTRIBUTE 0x1dc8
> +#define MV64340_PCI_0_ERROR_COMMAND 0x1d50
> +#define MV64340_PCI_1_ERROR_COMMAND 0x1dd0
> +#define MV64340_PCI_0_ERROR_CAUSE 0x1d58
> +#define MV64340_PCI_1_ERROR_CAUSE 0x1dd8
> +#define MV64340_PCI_0_ERROR_MASK 0x1d5c
> +#define MV64340_PCI_1_ERROR_MASK 0x1ddc
> +
> +/****************************************/
> +/* PCI Debug Registers */
> +/****************************************/
> +
> +#define MV64340_PCI_0_MMASK 0X1D24
> +#define MV64340_PCI_1_MMASK 0X1DA4
> +
> +/*********************************************/
> +/* PCI Configuration, Function 0, Registers */
> +/*********************************************/
> +
> +#define MV64340_PCI_DEVICE_AND_VENDOR_ID 0x000
> +#define MV64340_PCI_STATUS_AND_COMMAND 0x004
> +#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID 0x008
> +#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 0x00C
> +
> +#define MV64340_PCI_SCS_0_BASE_ADDR_LOW 0x010
> +#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH 0x014
> +#define MV64340_PCI_SCS_1_BASE_ADDR_LOW 0x018
> +#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH 0x01C
> +#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW 0x020
> +#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH 0x024
> +#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID 0x02c
> +#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030
> +#define MV64340_PCI_CAPABILTY_LIST_POINTER 0x034
> +#define MV64340_PCI_INTERRUPT_PIN_AND_LINE 0x03C
> + /* capability list */
> +#define MV64340_PCI_POWER_MANAGEMENT_CAPABILITY 0x040
> +#define MV64340_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL 0x044
> +#define MV64340_PCI_VPD_ADDR 0x048
> +#define MV64340_PCI_VPD_DATA 0x04c
> +#define MV64340_PCI_MSI_MESSAGE_CONTROL 0x050
> +#define MV64340_PCI_MSI_MESSAGE_ADDR 0x054
> +#define MV64340_PCI_MSI_MESSAGE_UPPER_ADDR 0x058
> +#define MV64340_PCI_MSI_MESSAGE_DATA 0x05c
> +#define MV64340_PCI_X_COMMAND 0x060
> +#define MV64340_PCI_X_STATUS 0x064
> +#define MV64340_PCI_COMPACT_PCI_HOT_SWAP 0x068
> +
> +/***********************************************/
> +/* PCI Configuration, Function 1, Registers */
> +/***********************************************/
> +
> +#define MV64340_PCI_SCS_2_BASE_ADDR_LOW 0x110
> +#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH 0x114
> +#define MV64340_PCI_SCS_3_BASE_ADDR_LOW 0x118
> +#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH 0x11c
> +#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW 0x120
> +#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH 0x124
> +
> +/***********************************************/
> +/* PCI Configuration, Function 2, Registers */
> +/***********************************************/
> +
> +#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW 0x210
> +#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH 0x214
> +#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW 0x218
> +#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH 0x21c
> +#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW 0x220
> +#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH 0x224
> +
> +/***********************************************/
> +/* PCI Configuration, Function 3, Registers */
> +/***********************************************/
> +
> +#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW 0x310
> +#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH 0x314
> +#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW 0x318
> +#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH 0x31c
> +#define MV64340_PCI_CPU_BASE_ADDR_LOW 0x220
> +#define MV64340_PCI_CPU_BASE_ADDR_HIGH 0x224
> +
> +/***********************************************/
> +/* PCI Configuration, Function 4, Registers */
> +/***********************************************/
> +
> +#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW 0x410
> +#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH 0x414
> +#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW 0x418
> +#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH 0x41c
> +#define MV64340_PCI_P2P_I_O_BASE_ADDR 0x420
> +#define MV64340_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR 0x424
> +
> +/****************************************/
> +/* Messaging Unit Registers (I20) */
> +/****************************************/
> +
> +#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE 0x010
> +#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE 0x014
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 0x018
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE 0x01C
> +#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE 0x020
> +#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x024
> +#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x028
> +#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 0x02C
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE 0x030
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE 0x034
> +#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x040
> +#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE 0x044
> +#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 0x050
> +#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 0x054
> +#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x060
> +#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x064
> +#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x068
> +#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x06C
> +#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE 0x070
> +#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE 0x074
> +#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE 0x0F8
> +#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE 0x0FC
> +
> +#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE 0x090
> +#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE 0x094
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 0x098
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE 0x09C
> +#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE 0x0A0
> +#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0A4
> +#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0A8
> +#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 0x0AC
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE 0x0B0
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE 0x0B4
> +#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C0
> +#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE 0x0C4
> +#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 0x0D0
> +#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 0x0D4
> +#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0E0
> +#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0E4
> +#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x0E8
> +#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x0EC
> +#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE 0x0F0
> +#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE 0x0F4
> +#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE 0x078
> +#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE 0x07C
> +
> +#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C10
> +#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C14
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 0x1C18
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE 0x1C1C
> +#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE 0x1C20
> +#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C24
> +#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C28
> +#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 0x1C2C
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE 0x1C30
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE 0x1C34
> +#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C40
> +#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE 0x1C44
> +#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 0x1C50
> +#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 0x1C54
> +#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C60
> +#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C64
> +#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1C68
> +#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1C6C
> +#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE 0x1C70
> +#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE 0x1C74
> +#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE 0x1CF8
> +#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE 0x1CFC
> +#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C90
> +#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C94
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 0x1C98
> +#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE 0x1C9C
> +#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE 0x1CA0
> +#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CA4
> +#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CA8
> +#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 0x1CAC
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE 0x1CB0
> +#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE 0x1CB4
> +#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC0
> +#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE 0x1CC4
> +#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 0x1CD0
> +#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 0x1CD4
> +#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CE0
> +#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CE4
> +#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1CE8
> +#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1CEC
> +#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE 0x1CF0
> +#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE 0x1CF4
> +#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE 0x1C78
> +#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE 0x1C7C
> +
> +/****************************************/
> +/* Ethernet Unit Registers */
> +/****************************************/
> +
> +/*******************************************/
> +/* CUNIT Registers */
> +/*******************************************/
> +
> + /* Address Decoding Register Map */
> +
> +#define MV64340_CUNIT_BASE_ADDR_REG0 0xf200
> +#define MV64340_CUNIT_BASE_ADDR_REG1 0xf208
> +#define MV64340_CUNIT_BASE_ADDR_REG2 0xf210
> +#define MV64340_CUNIT_BASE_ADDR_REG3 0xf218
> +#define MV64340_CUNIT_SIZE0 0xf204
> +#define MV64340_CUNIT_SIZE1 0xf20c
> +#define MV64340_CUNIT_SIZE2 0xf214
> +#define MV64340_CUNIT_SIZE3 0xf21c
> +#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG0 0xf240
> +#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG1 0xf244
> +#define MV64340_CUNIT_BASE_ADDR_ENABLE_REG 0xf250
> +#define MV64340_MPSC0_ACCESS_PROTECTION_REG 0xf254
> +#define MV64340_MPSC1_ACCESS_PROTECTION_REG 0xf258
> +#define MV64340_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG 0xf25C
> +
> + /* Error Report Registers */
> +
> +#define MV64340_CUNIT_INTERRUPT_CAUSE_REG 0xf310
> +#define MV64340_CUNIT_INTERRUPT_MASK_REG 0xf314
> +#define MV64340_CUNIT_ERROR_ADDR 0xf318
> +
> + /* Cunit Control Registers */
> +
> +#define MV64340_CUNIT_ARBITER_CONTROL_REG 0xf300
> +#define MV64340_CUNIT_CONFIG_REG 0xb40c
> +#define MV64340_CUNIT_CRROSBAR_TIMEOUT_REG 0xf304
> +
> + /* Cunit Debug Registers */
> +
> +#define MV64340_CUNIT_DEBUG_LOW 0xf340
> +#define MV64340_CUNIT_DEBUG_HIGH 0xf344
> +#define MV64340_CUNIT_MMASK 0xf380
> +
> + /* MPSCs Clocks Routing Registers */
> +
> +#define MV64340_MPSC_ROUTING_REG 0xb400
> +#define MV64340_MPSC_RX_CLOCK_ROUTING_REG 0xb404
> +#define MV64340_MPSC_TX_CLOCK_ROUTING_REG 0xb408
> +
> + /* MPSCs Interrupts Registers */
> +
> +#define MV64340_MPSC_CAUSE_REG(port) (0xb804 + (port<<3))
> +#define MV64340_MPSC_MASK_REG(port) (0xb884 + (port<<3))
> +
> +#define MV64340_MPSC_MAIN_CONFIG_LOW(port) (0x8000 + (port<<12))
> +#define MV64340_MPSC_MAIN_CONFIG_HIGH(port) (0x8004 + (port<<12))
> +#define MV64340_MPSC_PROTOCOL_CONFIG(port) (0x8008 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG1(port) (0x800c + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG2(port) (0x8010 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG3(port) (0x8014 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG4(port) (0x8018 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG5(port) (0x801c + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG6(port) (0x8020 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG7(port) (0x8024 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG8(port) (0x8028 + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG9(port) (0x802c + (port<<12))
> +#define MV64340_MPSC_CHANNEL_REG10(port) (0x8030 + (port<<12))
> +
> + /* MPSC0 Registers */
> +
> +
> +/***************************************/
> +/* SDMA Registers */
> +/***************************************/
> +
> +#define MV64340_SDMA_CONFIG_REG(channel) (0x4000 + (channel<<13))
> +#define MV64340_SDMA_COMMAND_REG(channel) (0x4008 + (channel<<13))
> +#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel) (0x4810 + (channel<<13))
> +#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel) (0x4c10 + (channel<<13))
> +#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel) (0x4c14 + (channel<<13))
> +
> +#define MV64340_SDMA_CAUSE_REG 0xb800
> +#define MV64340_SDMA_MASK_REG 0xb880
> +
> +/* BRG Interrupts */
> +
> +#define MV64340_BRG_CONFIG_REG(brg) (0xb200 + (brg<<3))
> +#define MV64340_BRG_BAUDE_TUNING_REG(brg) (0xb208 + (brg<<3))
> +#define MV64340_BRG_CAUSE_REG 0xb834
> +#define MV64340_BRG_MASK_REG 0xb8b4
> +
> +/****************************************/
> +/* DMA Channel Control */
> +/****************************************/
> +
> +#define MV64340_DMA_CHANNEL0_CONTROL 0x840
> +#define MV64340_DMA_CHANNEL0_CONTROL_HIGH 0x880
> +#define MV64340_DMA_CHANNEL1_CONTROL 0x844
> +#define MV64340_DMA_CHANNEL1_CONTROL_HIGH 0x884
> +#define MV64340_DMA_CHANNEL2_CONTROL 0x848
> +#define MV64340_DMA_CHANNEL2_CONTROL_HIGH 0x888
> +#define MV64340_DMA_CHANNEL3_CONTROL 0x84C
> +#define MV64340_DMA_CHANNEL3_CONTROL_HIGH 0x88C
> +
> +
> +/****************************************/
> +/* IDMA Registers */
> +/****************************************/
> +
> +#define MV64340_DMA_CHANNEL0_BYTE_COUNT 0x800
> +#define MV64340_DMA_CHANNEL1_BYTE_COUNT 0x804
> +#define MV64340_DMA_CHANNEL2_BYTE_COUNT 0x808
> +#define MV64340_DMA_CHANNEL3_BYTE_COUNT 0x80C
> +#define MV64340_DMA_CHANNEL0_SOURCE_ADDR 0x810
> +#define MV64340_DMA_CHANNEL1_SOURCE_ADDR 0x814
> +#define MV64340_DMA_CHANNEL2_SOURCE_ADDR 0x818
> +#define MV64340_DMA_CHANNEL3_SOURCE_ADDR 0x81c
> +#define MV64340_DMA_CHANNEL0_DESTINATION_ADDR 0x820
> +#define MV64340_DMA_CHANNEL1_DESTINATION_ADDR 0x824
> +#define MV64340_DMA_CHANNEL2_DESTINATION_ADDR 0x828
> +#define MV64340_DMA_CHANNEL3_DESTINATION_ADDR 0x82C
> +#define MV64340_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER 0x830
> +#define MV64340_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER 0x834
> +#define MV64340_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER 0x838
> +#define MV64340_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER 0x83C
> +#define MV64340_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER 0x870
> +#define MV64340_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER 0x874
> +#define MV64340_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER 0x878
> +#define MV64340_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER 0x87C
> +
> + /* IDMA Address Decoding Base Address Registers */
> +
> +#define MV64340_DMA_BASE_ADDR_REG0 0xa00
> +#define MV64340_DMA_BASE_ADDR_REG1 0xa08
> +#define MV64340_DMA_BASE_ADDR_REG2 0xa10
> +#define MV64340_DMA_BASE_ADDR_REG3 0xa18
> +#define MV64340_DMA_BASE_ADDR_REG4 0xa20
> +#define MV64340_DMA_BASE_ADDR_REG5 0xa28
> +#define MV64340_DMA_BASE_ADDR_REG6 0xa30
> +#define MV64340_DMA_BASE_ADDR_REG7 0xa38
> +
> + /* IDMA Address Decoding Size Address Register */
> +
> +#define MV64340_DMA_SIZE_REG0 0xa04
> +#define MV64340_DMA_SIZE_REG1 0xa0c
> +#define MV64340_DMA_SIZE_REG2 0xa14
> +#define MV64340_DMA_SIZE_REG3 0xa1c
> +#define MV64340_DMA_SIZE_REG4 0xa24
> +#define MV64340_DMA_SIZE_REG5 0xa2c
> +#define MV64340_DMA_SIZE_REG6 0xa34
> +#define MV64340_DMA_SIZE_REG7 0xa3C
> +
> + /* IDMA Address Decoding High Address Remap and Access
> + Protection Registers */
> +
> +#define MV64340_DMA_HIGH_ADDR_REMAP_REG0 0xa60
> +#define MV64340_DMA_HIGH_ADDR_REMAP_REG1 0xa64
> +#define MV64340_DMA_HIGH_ADDR_REMAP_REG2 0xa68
> +#define MV64340_DMA_HIGH_ADDR_REMAP_REG3 0xa6C
> +#define MV64340_DMA_BASE_ADDR_ENABLE_REG 0xa80
> +#define MV64340_DMA_CHANNEL0_ACCESS_PROTECTION_REG 0xa70
> +#define MV64340_DMA_CHANNEL1_ACCESS_PROTECTION_REG 0xa74
> +#define MV64340_DMA_CHANNEL2_ACCESS_PROTECTION_REG 0xa78
> +#define MV64340_DMA_CHANNEL3_ACCESS_PROTECTION_REG 0xa7c
> +#define MV64340_DMA_ARBITER_CONTROL 0x860
> +#define MV64340_DMA_CROSS_BAR_TIMEOUT 0x8d0
> +
> + /* IDMA Headers Retarget Registers */
> +
> +#define MV64340_DMA_HEADERS_RETARGET_CONTROL 0xa84
> +#define MV64340_DMA_HEADERS_RETARGET_BASE 0xa88
> +
> + /* IDMA Interrupt Register */
> +
> +#define MV64340_DMA_INTERRUPT_CAUSE_REG 0x8c0
> +#define MV64340_DMA_INTERRUPT_CAUSE_MASK 0x8c4
> +#define MV64340_DMA_ERROR_ADDR 0x8c8
> +#define MV64340_DMA_ERROR_SELECT 0x8cc
> +
> + /* IDMA Debug Register ( for internal use ) */
> +
> +#define MV64340_DMA_DEBUG_LOW 0x8e0
> +#define MV64340_DMA_DEBUG_HIGH 0x8e4
> +#define MV64340_DMA_SPARE 0xA8C
> +
> +/****************************************/
> +/* Timer_Counter */
> +/****************************************/
> +
> +#define MV64340_TIMER_COUNTER0 0x850
> +#define MV64340_TIMER_COUNTER1 0x854
> +#define MV64340_TIMER_COUNTER2 0x858
> +#define MV64340_TIMER_COUNTER3 0x85C
> +#define MV64340_TIMER_COUNTER_0_3_CONTROL 0x864
> +#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE 0x868
> +#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK 0x86c
> +
> +/****************************************/
> +/* Watchdog registers */
> +/****************************************/
> +
> +#define MV64340_WATCHDOG_CONFIG_REG 0xb410
> +#define MV64340_WATCHDOG_VALUE_REG 0xb414
> +
> +/****************************************/
> +/* I2C Registers */
> +/****************************************/
> +
> +#define MV64XXX_I2C_OFFSET 0xc000
> +#define MV64XXX_I2C_REG_BLOCK_SIZE 0x0020
> +
> +/****************************************/
> +/* GPP Interface Registers */
> +/****************************************/
> +
> +#define MV64340_GPP_IO_CONTROL 0xf100
> +#define MV64340_GPP_LEVEL_CONTROL 0xf110
> +#define MV64340_GPP_VALUE 0xf104
> +#define MV64340_GPP_INTERRUPT_CAUSE 0xf108
> +#define MV64340_GPP_INTERRUPT_MASK0 0xf10c
> +#define MV64340_GPP_INTERRUPT_MASK1 0xf114
> +#define MV64340_GPP_VALUE_SET 0xf118
> +#define MV64340_GPP_VALUE_CLEAR 0xf11c
> +
> +/****************************************/
> +/* Interrupt Controller Registers */
> +/****************************************/
> +
> +/****************************************/
> +/* Interrupts */
> +/****************************************/
> +
> +#define MV64340_MAIN_INTERRUPT_CAUSE_LOW 0x004
> +#define MV64340_MAIN_INTERRUPT_CAUSE_HIGH 0x00c
> +#define MV64340_CPU_INTERRUPT0_MASK_LOW 0x014
> +#define MV64340_CPU_INTERRUPT0_MASK_HIGH 0x01c
> +#define MV64340_CPU_INTERRUPT0_SELECT_CAUSE 0x024
> +#define MV64340_CPU_INTERRUPT1_MASK_LOW 0x034
> +#define MV64340_CPU_INTERRUPT1_MASK_HIGH 0x03c
> +#define MV64340_CPU_INTERRUPT1_SELECT_CAUSE 0x044
> +#define MV64340_INTERRUPT0_MASK_0_LOW 0x054
> +#define MV64340_INTERRUPT0_MASK_0_HIGH 0x05c
> +#define MV64340_INTERRUPT0_SELECT_CAUSE 0x064
> +#define MV64340_INTERRUPT1_MASK_0_LOW 0x074
> +#define MV64340_INTERRUPT1_MASK_0_HIGH 0x07c
> +#define MV64340_INTERRUPT1_SELECT_CAUSE 0x084
> +
> +/****************************************/
> +/* MPP Interface Registers */
> +/****************************************/
> +
> +#define MV64340_MPP_CONTROL0 0xf000
> +#define MV64340_MPP_CONTROL1 0xf004
> +#define MV64340_MPP_CONTROL2 0xf008
> +#define MV64340_MPP_CONTROL3 0xf00c
> +
> +/****************************************/
> +/* Serial Initialization registers */
> +/****************************************/
> +
> +#define MV64340_SERIAL_INIT_LAST_DATA 0xf324
> +#define MV64340_SERIAL_INIT_CONTROL 0xf328
> +#define MV64340_SERIAL_INIT_STATUS 0xf32c
> +
> +#endif /* __ASM_MV643XX_H */
> diff --git a/hw/pci-host/trace-events b/hw/pci-host/trace-events
> index 7d8063ac42..dac86ad3f0 100644
> --- a/hw/pci-host/trace-events
> +++ b/hw/pci-host/trace-events
> @@ -3,6 +3,12 @@
> # grackle.c
> grackle_set_irq(int irq_num, int level) "set_irq num %d level %d"
>
> +# mv64361.c
> +mv64361_region_map(const char *name, uint64_t poffs, uint64_t size, uint64_t moffs) "Mapping %s 0x%"PRIx64"+0x%"PRIx64" @ 0x%"PRIx64
> +mv64361_region_enable(const char *op, int num) "Should %s region %d"
> +mv64361_reg_read(uint64_t addr, uint32_t val) "0x%"PRIx64" -> 0x%x"
> +mv64361_reg_write(uint64_t addr, uint64_t val) "0x%"PRIx64" <- 0x%"PRIx64
> +
> # sabre.c
> sabre_set_request(int irq_num) "request irq %d"
> sabre_clear_request(int irq_num) "clear request irq %d"
> diff --git a/include/hw/pci-host/mv64361.h b/include/hw/pci-host/mv64361.h
> new file mode 100644
> index 0000000000..9cdb35cb3c
> --- /dev/null
> +++ b/include/hw/pci-host/mv64361.h
> @@ -0,0 +1,8 @@
> +#ifndef MV64361_H
> +#define MV64361_H
> +
> +#define TYPE_MV64361 "mv64361"
> +
> +PCIBus *mv64361_get_pci_bus(DeviceState *dev, int n);
> +
> +#endif
> diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
> index ac0c23ebc7..5c14681b82 100644
> --- a/include/hw/pci/pci_ids.h
> +++ b/include/hw/pci/pci_ids.h
> @@ -214,6 +214,7 @@
> #define PCI_DEVICE_ID_VIA_8231_PM 0x8235
>
> #define PCI_VENDOR_ID_MARVELL 0x11ab
> +#define PCI_DEVICE_ID_MARVELL_MV6436X 0x6460
>
> #define PCI_VENDOR_ID_SILICON_MOTION 0x126f
> #define PCI_DEVICE_ID_SM501 0x0501
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/6] Pegasos2 emulation
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
` (6 preceding siblings ...)
2021-02-22 16:19 ` [PATCH v3 0/6] Pegasos2 emulation no-reply
@ 2021-02-23 4:42 ` David Gibson
2021-02-23 9:24 ` BALATON Zoltan
7 siblings, 1 reply; 19+ messages in thread
From: David Gibson @ 2021-02-23 4:42 UTC (permalink / raw)
To: BALATON Zoltan; +Cc: Peter Maydell, Paolo Bonzini, qemu-ppc, qemu-devel, f4bug
[-- Attachment #1: Type: text/plain, Size: 1615 bytes --]
On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
> Hello,
>
> This is adding a new PPC board called pegasos2. More info on it can be
> found at:
>
> https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
>
> Currently it needs a firmware ROM image that I cannot include due to
> original copyright holder (bPlan) did not release it under a free
> licence but I have plans to write a replacement in the future. With
> the original board firmware it can boot MorphOS now as:
>
> qemu-system-ppc -M pegasos2 -cdrom morphos.iso -device ati-vga,romfile="" -serial stdio
>
> then enter "boot cd boot.img" at the firmware "ok" prompt as described
> in the MorphOS.readme. To boot Linux use same command line with e.g.
> -cdrom debian-8.11.0-powerpc-netinst.iso then enter
> "boot cd install/pegasos"
>
> The last patch adds the actual board code after previous patches
> adding VT8231 and MV64361 system controller chip emulation. The
> mv643xx.h header file is taken from Linux and produces a bunch of
> checkpatch warnings due to different formatting rules it follows, I'm
> not sure we want to adopt it and change formatting or keep it as it
> is.
A couple of overall comments:
* Adding yourself to MAINTAINERS for the new files would be a good
idea
* At least some rudimentary tests would be good, though I guess that
might be tricky with non-free firmware
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller
2021-02-23 4:40 ` David Gibson
@ 2021-02-23 9:13 ` BALATON Zoltan
0 siblings, 0 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-23 9:13 UTC (permalink / raw)
To: David Gibson; +Cc: Peter Maydell, f4bug, qemu-ppc, qemu-devel, Paolo Bonzini
On Tue, 23 Feb 2021, David Gibson wrote:
> On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
>> The Marvell Discovery II aka. MV64361 is a PowerPC system controller
>> chip that is used on the pegasos2 PPC board. This adds emulation of it
>> that models the device enough to boot guests on this board. The
>> mv643xx.h header with register definitions is taken from Linux 4.15.10
>> only fixing end of line white space errors and removing not needed
>> parts, it's otherwise keeps Linux formatting.
>>
>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>
> This needs to go before the previous patch to avoid bisect breakage,
> doesn't it?
Yes this is 5/6 and that's 6/6 but sending the patches at once sometimes
mixes up their order if you sort by receive time.
Regards,
BALATON Zoltan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs
2021-02-23 4:34 ` David Gibson
@ 2021-02-23 9:18 ` BALATON Zoltan
2021-02-23 9:27 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-23 9:18 UTC (permalink / raw)
To: David Gibson; +Cc: Peter Maydell, f4bug, qemu-ppc, qemu-devel, Paolo Bonzini
On Tue, 23 Feb 2021, David Gibson wrote:
> On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
>> In VIA super south bridge the io ranges of superio components
>> (parallel and serial ports and FDC) can be controlled by superio
>> config registers to set their base address and enable/disable them.
>> This is not easy to implement in QEMU because ISA emulation is only
>> designed to set io base address once on creating the device and io
>> ranges are registered at creation and cannot easily be disabled or
>> moved later.
>>
>> In this patch we hack around that but only for serial ports because
>> those have a single io range at port base that's relatively easy to
>> handle and it's what guests actually use and set address different
>> than the default.
>>
>> We do not attempt to handle controlling the parallel and FDC regions
>> because those have multiple io ranges so handling them would be messy
>> and guests either don't change their deafult or don't care. We could
>> even get away with disabling and not emulating them, but since they
>> are already there, this patch leaves them mapped at their default
>> address just in case this could be useful for a guest in the future.
>>
>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>
> The maintainers of the hw/isa/vt82c686.c should probably be CCed on this.
He is (but may not be obvious because the accent in Phil's name is not
handled well by my mail host so to avoid misspelling his name I've just
omitted it). And he also said these should go in via some other tree:
https://lists.nongnu.org/archive/html/qemu-devel/2021-02/msg06551.html
He may still review or ack these but I guess he'd need some time.
I'll do the other changes you suggested.
Regards,
BALATON Zoltan
>> ---
>> hw/isa/vt82c686.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 82 insertions(+), 2 deletions(-)
>>
>> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
>> index 5db9b1706c..98bd57a074 100644
>> --- a/hw/isa/vt82c686.c
>> +++ b/hw/isa/vt82c686.c
>> @@ -252,8 +252,24 @@ static const TypeInfo vt8231_pm_info = {
>> typedef struct SuperIOConfig {
>> uint8_t regs[0x100];
>> MemoryRegion io;
>> + ISASuperIODevice *superio;
>> + MemoryRegion *serial_io[SUPERIO_MAX_SERIAL_PORTS];
>> } SuperIOConfig;
>>
>> +static MemoryRegion *find_subregion(ISADevice *d, MemoryRegion *parent,
>> + int offs)
>> +{
>> + MemoryRegion *subregion, *mr = NULL;
>> +
>> + QTAILQ_FOREACH(subregion, &parent->subregions, subregions_link) {
>> + if (subregion->addr == offs) {
>> + mr = subregion;
>> + break;
>> + }
>> + }
>> + return mr;
>> +}
>> +
>> static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
>> unsigned size)
>> {
>> @@ -279,7 +295,53 @@ static void superio_cfg_write(void *opaque, hwaddr addr, uint64_t data,
>> case 0xfd ... 0xff:
>> /* ignore write to read only registers */
>> return;
>> - /* case 0xe6 ... 0xe8: Should set base port of parallel and serial */
>> + case 0xe2:
>> + {
>> + data &= 0x1f;
>> + if (data & BIT(2)) { /* Serial port 1 enable */
>> + ISADevice *dev = sc->superio->serial[0];
>> + if (!memory_region_is_mapped(sc->serial_io[0])) {
>> + memory_region_add_subregion(isa_address_space_io(dev),
>> + dev->ioport_id, sc->serial_io[0]);
>> + }
>> + } else {
>> + MemoryRegion *io = isa_address_space_io(sc->superio->serial[0]);
>> + if (memory_region_is_mapped(sc->serial_io[0])) {
>> + memory_region_del_subregion(io, sc->serial_io[0]);
>> + }
>> + }
>> + if (data & BIT(3)) { /* Serial port 2 enable */
>> + ISADevice *dev = sc->superio->serial[1];
>> + if (!memory_region_is_mapped(sc->serial_io[1])) {
>> + memory_region_add_subregion(isa_address_space_io(dev),
>> + dev->ioport_id, sc->serial_io[1]);
>> + }
>> + } else {
>> + MemoryRegion *io = isa_address_space_io(sc->superio->serial[1]);
>> + if (memory_region_is_mapped(sc->serial_io[1])) {
>> + memory_region_del_subregion(io, sc->serial_io[1]);
>> + }
>> + }
>> + break;
>> + }
>> + case 0xe7: /* Serial port 1 io base address */
>> + {
>> + data &= 0xfe;
>> + sc->superio->serial[0]->ioport_id = data << 2;
>> + if (memory_region_is_mapped(sc->serial_io[0])) {
>> + memory_region_set_address(sc->serial_io[0], data << 2);
>> + }
>> + break;
>> + }
>> + case 0xe8: /* Serial port 2 io base address */
>> + {
>> + data &= 0xfe;
>> + sc->superio->serial[1]->ioport_id = data << 2;
>> + if (memory_region_is_mapped(sc->serial_io[1])) {
>> + memory_region_set_address(sc->serial_io[1], data << 2);
>> + }
>> + break;
>> + }
>> default:
>> qemu_log_mask(LOG_UNIMP,
>> "via_superio_cfg: unimplemented register 0x%x\n", idx);
>> @@ -385,6 +447,7 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>> DeviceState *dev = DEVICE(d);
>> ISABus *isa_bus;
>> qemu_irq *isa_irq;
>> + ISASuperIOClass *ic;
>> int i;
>>
>> qdev_init_gpio_out(dev, &s->cpu_intr, 1);
>> @@ -394,7 +457,9 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>> isa_bus_irqs(isa_bus, i8259_init(isa_bus, *isa_irq));
>> i8254_pit_init(isa_bus, 0x40, 0, NULL);
>> i8257_dma_init(isa_bus, 0);
>> - isa_create_simple(isa_bus, TYPE_VT82C686B_SUPERIO);
>> + s->superio_cfg.superio = ISA_SUPERIO(isa_create_simple(isa_bus,
>> + TYPE_VT82C686B_SUPERIO));
>> + ic = ISA_SUPERIO_GET_CLASS(s->superio_cfg.superio);
>> mc146818_rtc_init(isa_bus, 2000, NULL);
>>
>> for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
>> @@ -412,6 +477,21 @@ static void vt82c686b_realize(PCIDevice *d, Error **errp)
>> */
>> memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
>> &s->superio_cfg.io);
>> +
>> + /* Grab io regions of serial devices so we can control them */
>> + for (i = 0; i < ic->serial.count; i++) {
>> + ISADevice *sd = s->superio_cfg.superio->serial[i];
>> + MemoryRegion *io = isa_address_space_io(sd);
>> + MemoryRegion *mr = find_subregion(sd, io, sd->ioport_id);
>> + if (!mr) {
>> + error_setg(errp, "Could not get io region for serial %d", i);
>> + return;
>> + }
>> + s->superio_cfg.serial_io[i] = mr;
>> + if (memory_region_is_mapped(mr)) {
>> + memory_region_del_subregion(io, mr);
>> + }
>> + }
>> }
>>
>> static void via_class_init(ObjectClass *klass, void *data)
>
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/6] Pegasos2 emulation
2021-02-23 4:42 ` David Gibson
@ 2021-02-23 9:24 ` BALATON Zoltan
0 siblings, 0 replies; 19+ messages in thread
From: BALATON Zoltan @ 2021-02-23 9:24 UTC (permalink / raw)
To: David Gibson; +Cc: Peter Maydell, f4bug, qemu-ppc, qemu-devel, Paolo Bonzini
On Tue, 23 Feb 2021, David Gibson wrote:
> On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
>> Hello,
>>
>> This is adding a new PPC board called pegasos2. More info on it can be
>> found at:
>>
>> https://osdn.net/projects/qmiga/wiki/SubprojectPegasos2
>>
>> Currently it needs a firmware ROM image that I cannot include due to
>> original copyright holder (bPlan) did not release it under a free
>> licence but I have plans to write a replacement in the future. With
>> the original board firmware it can boot MorphOS now as:
>>
>> qemu-system-ppc -M pegasos2 -cdrom morphos.iso -device ati-vga,romfile="" -serial stdio
>>
>> then enter "boot cd boot.img" at the firmware "ok" prompt as described
>> in the MorphOS.readme. To boot Linux use same command line with e.g.
>> -cdrom debian-8.11.0-powerpc-netinst.iso then enter
>> "boot cd install/pegasos"
>>
>> The last patch adds the actual board code after previous patches
>> adding VT8231 and MV64361 system controller chip emulation. The
>> mv643xx.h header file is taken from Linux and produces a bunch of
>> checkpatch warnings due to different formatting rules it follows, I'm
>> not sure we want to adopt it and change formatting or keep it as it
>> is.
>
> A couple of overall comments:
>
> * Adding yourself to MAINTAINERS for the new files would be a good
> idea
> * At least some rudimentary tests would be good, though I guess that
> might be tricky with non-free firmware
I've described here what could be a test:
https://lists.nongnu.org/archive/html/qemu-devel/2021-01/msg01553.html
but I'm not sure how to implement that in qtest so if somebody helped with
that that would be greatly appreciated.
Regards,
BALATON Zoltan
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs
2021-02-23 9:18 ` BALATON Zoltan
@ 2021-02-23 9:27 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 19+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-02-23 9:27 UTC (permalink / raw)
To: BALATON Zoltan, David Gibson
Cc: Peter Maydell, Huacai Chen, qemu-devel, qemu-ppc, Paolo Bonzini
On 2/23/21 10:18 AM, BALATON Zoltan wrote:
> On Tue, 23 Feb 2021, David Gibson wrote:
>> On Mon, Feb 22, 2021 at 04:22:06PM +0100, BALATON Zoltan wrote:
>>> In VIA super south bridge the io ranges of superio components
>>> (parallel and serial ports and FDC) can be controlled by superio
>>> config registers to set their base address and enable/disable them.
>>> This is not easy to implement in QEMU because ISA emulation is only
>>> designed to set io base address once on creating the device and io
>>> ranges are registered at creation and cannot easily be disabled or
>>> moved later.
>>>
>>> In this patch we hack around that but only for serial ports because
>>> those have a single io range at port base that's relatively easy to
>>> handle and it's what guests actually use and set address different
>>> than the default.
>>>
>>> We do not attempt to handle controlling the parallel and FDC regions
>>> because those have multiple io ranges so handling them would be messy
>>> and guests either don't change their deafult or don't care. We could
>>> even get away with disabling and not emulating them, but since they
>>> are already there, this patch leaves them mapped at their default
>>> address just in case this could be useful for a guest in the future.
>>>
>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>
>> The maintainers of the hw/isa/vt82c686.c should probably be CCed on this.
>
> He is (but may not be obvious because the accent in Phil's name is not
> handled well by my mail host so to avoid misspelling his name I've just
> omitted it).
We are 3 (other now Cc'ed):
$ ./scripts/get_maintainer.pl -f hw/isa/vt82c686.c
Huacai Chen <chenhuacai@kernel.org> (odd fixer:Fuloong 2E)
"Philippe Mathieu-Daudé" <f4bug@amsat.org> (odd fixer:Fuloong 2E)
Jiaxun Yang <jiaxun.yang@flygoat.com> (reviewer:Fuloong 2E)
> And he also said these should go in via some other tree:
>
> https://lists.nongnu.org/archive/html/qemu-devel/2021-02/msg06551.html
>
> He may still review or ack these but I guess he'd need some time.
I took a bunch of Zoltan's patches:
$ git log --oneline e551455f1e7..00d8ba9e0d6 hw/isa/vt82c686.c
cc2b4550115 vt82c686: Fix superio_cfg_{read,write}() functions
2c4c556e061 vt82c686: Log superio_cfg unimplemented accesses
b7741b77425 vt82c686: Simplify by returning earlier
2b98dca9571 vt82c686: Reduce indentation by returning early
c953bf71182 vt82c686: Remove index field of SuperIOConfig
3dc31cb8490 vt82c686: Move creation of ISA devices to the ISA bridge
9859ad1c4b6 vt82c686: Simplify vt82c686b_realize()
e1a69736e59 vt82c686: Make vt82c686b-pm an abstract base class and add
vt8231-pm based on it
084bf4b41d4 vt82c686: Set user_creatable=false for VT82C686B_PM
3ab1eea6bce vt82c686: Fix up power management io base and config
9af8e529b91 vt82c686: Correctly reset all registers to default values on
reset
40a0bba1e3f vt82c686: Correct vt82c686-pm I/O size
35e360ed674 vt82c686: Make vt82c686-pm an I/O tracing region
911629e6d37 vt82c686: Fix SMBus IO base and configuration registers
94349bffda0 vt82c686: Reorganise code
6be6e4bc769 vt82c686: Move superio memory region to SuperIOConfig struct
7886a674f13 vt82c686: Rename superio config related parts
007b3103a39 vt82c686: Use shorter name for local variable holding object
state
9b0fbae2cbf vt82c686: Remove unneeded includes and defines
ff413a1f7f6 vt82c686: Convert debug printf to trace points
dc66439542c vt82c686: Remove legacy vt82c686b_pm_init() function
0bfda9a225b vt82c686: Remove legacy vt82c686b_isa_init() function
657fae258f9 vt82c686: Split off via-[am]c97 into separate file in hw/audio
07c6832cb2c vt82c686: Remove vt82c686b_[am]c97_init() functions
0f79846147f vt82c686: Rename VT82C686B to VT82C686B_ISA
e6340505441 vt82c686: Remove unnecessary _DEVICE suffix from type macros
5a4856ed78e vt82c686: Rename AC97/MC97 parts from VT82C686B to VIA
But with this one I raised a question for find_subregion() ISA use,
and deferred to Paolo for this particular question, and to PPC for
the new VT8231 device model.
Regards,
Phil.
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2021-02-23 9:30 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-22 15:22 [PATCH v3 0/6] Pegasos2 emulation BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 6/6] hw/ppc: Add emulation of Genesi/bPlan Pegasos II BALATON Zoltan
2021-02-23 4:38 ` David Gibson
2021-02-22 15:22 ` [PATCH v3 1/6] vt82c686: Implement control of serial port io ranges via config regs BALATON Zoltan
2021-02-23 4:34 ` David Gibson
2021-02-23 9:18 ` BALATON Zoltan
2021-02-23 9:27 ` Philippe Mathieu-Daudé
2021-02-22 15:22 ` [PATCH v3 2/6] vt82c686: QOM-ify superio related functionality BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 4/6] vt82c686: Add emulation of VT8231 south bridge BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 3/6] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO BALATON Zoltan
2021-02-22 15:22 ` [PATCH v3 5/6] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller BALATON Zoltan
2021-02-22 16:40 ` Philippe Mathieu-Daudé
2021-02-22 17:01 ` BALATON Zoltan
2021-02-22 17:23 ` Philippe Mathieu-Daudé
2021-02-23 4:40 ` David Gibson
2021-02-23 9:13 ` BALATON Zoltan
2021-02-22 16:19 ` [PATCH v3 0/6] Pegasos2 emulation no-reply
2021-02-23 4:42 ` David Gibson
2021-02-23 9:24 ` BALATON Zoltan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).