* [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
@ 2015-12-29 7:08 zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 01/39] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
` (39 more replies)
0 siblings, 40 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:08 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
This is the 13th version of COLO (Still only support periodic checkpoint).
Here is only COLO frame part, you can get the whole codes from github:
https://github.com/coloft/qemu/commits/colo-v2.4-periodic-mode
Please ignore patch 4 ~ 5 which have been picked by Dave into another series.
Test procedure:
1. Startup qemu
Primary side:
#x86_64-softmmu/qemu-system-x86_64 -enable-kvm -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 -name primary -cpu qemu64,+kvmclock -device piix3-usb-uhci -device usb-tablet -netdev tap,id=hn0,vhost=off -device virtio-net-pci,id=net-pci0,netdev=hn0 -drive if=virtio,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,children.0.file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,children.0.driver=raw
Secondary side:
#x86_64-softmmu/qemu-system-x86_64 -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 -name secondary -enable-kvm -cpu qemu64,+kvmclock -device piix3-usb-uhci -device usb-tablet -netdev tap,id=hn0,vhost=off -device virtio-net-pci,id=net-pci0,netdev=hn0 -drive if=none,id=colo-disk0,file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,driver=raw,node-name=node0 -drive if=virtio,id=active-disk0,throttling.bps-total=70000000,driver=replication,mode=secondary,file.driver=qcow2,file.file.filename=/mnt/ramfs/active_disk.img,file.backing.driver=qcow2,file.backing.file.filename=/mnt/ramfs/hidden_disk.img,file.backing.backing=colo-disk0 -incoming tcp:0:8888
2. On Secondary VM's QEMU monitor, issue command
{'execute':'qmp_capabilities'}
{'execute': 'nbd-server-start', 'arguments': {'addr': {'type': 'inet', 'data': {'host': '192.168.2.88', 'port': '8889'} } } }
{'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk0', 'writable': true } }
{'execute': 'trace-event-set-state', 'arguments': {'name': 'colo*', 'enable': true} }
3. On Primary VM's QEMU monitor, issue command:
{'execute':'qmp_capabilities'}
{'execute': 'human-monitor-command', 'arguments': {'command-line': 'drive_add buddy driver=replication,mode=primary,file.driver=nbd,file.host=9.61.1.7,file.port=8889,file.export=colo-disk0,node-name=node0,if=none'}}
{'execute':'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', 'node': 'node0' } }
{'execute': 'migrate-set-capabilities', 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } }
{'execute': 'migrate', 'arguments': {'uri': 'tcp:192.168.2.88:8888' } }
4. After the above steps, you will see, whenever you make changes to PVM, SVM will be synced.
You can by issue command '{ "execute": "migrate-set-parameters" , "arguments":{ "x-checkpoint-delay": 2000 } }'
to change the checkpoint period time.
5. Failover test
You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's
monitor at the same time, then SVM will failover and client will not feel this
change.
Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to
issue block related command to stop block replication.
Primary:
Remove the nbd child from the quorum:
{ 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child': 'children.1'}}
Note: there is no qmp command to remove the blockdev now
Secondary:
The primary host is down, so we should do the following thing:
{ 'execute': 'nbd-server-stop' }
Please review, thanks.
TODO:
1. Checkpoint based on proxy in qemu
2. The capability of continuous FT
3. Optimize the VM's downtime during checkpoint
v13:
- Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
instead of return value to indicate success or failure. (patch 10)
- Remove the optional error message for COLO_EXIT event. (patch 25)
- Use semaphore to notify colo/colo incoming loop that failover work is
finished. (patch 26)
- Move COLO shutdown related codes to colo.c file. (patch 28)
- Fix memory leak bug for colo incoming loop. (new patch 31)
- Re-use some existed helper functions to realize the process of
saving/loading ram and device. (patch 32)
- Fix some other comments from Dave and Markus.
v12:
- Fix the bug that default buffer filter broken vhost-net.
- Add an flag in struct NetFilterState to help skipping default
filter for packets travelling through filter layer.
- Remove the default failover treatment which may cause split-brain.
- Rename checkpoint-delay to x-checkpoint-delay.
- Check if all netdev supports default filter before going into COLO.
- Reconstruct send/receive helper functions in patch 10.
- Address serveral other comments from Dave
v11:
- Re-implement buffer/release packets based on filter-buffer according
to Jason Wang's suggestion. (patch 34, patch 36 ~ patch 38)
- Rebase master to re-use some stuff introduced by post-copy.
- Address several comments from Eric and Dave, the fixing record can
be found in each patch.
v10:
- Rename 'colo_lost_heartbeat' command to experimental 'x_colo_lost_heartbeat'
- Rename migration capability 'colo' to 'x-colo' (Eric's suggestion)
- Simplify the process of primary side by dropping colo thread and reusing
migration thread. (Dave's suggestion)
- Add several netfilter related APIs to support buffer/release packets
for COLO (patch 32 ~ patch 36)
zhanghailiang (39):
configure: Add parameter for configure to enable/disable COLO support
migration: Introduce capability 'x-colo' to migration
COLO: migrate colo related info to secondary node
migration: Export migrate_set_state()
migration: Add state records for migration incoming
migration: Integrate COLO checkpoint process into migration
migration: Integrate COLO checkpoint process into loadvm
migration: Rename the'file' member of MigrationState
COLO/migration: Create a new communication path from destination to
source
COLO: Implement colo checkpoint protocol
COLO: Add a new RunState RUN_STATE_COLO
QEMUSizedBuffer: Introduce two help functions for qsb
COLO: Save PVM state to secondary side when do checkpoint
ram: Split host_from_stream_offset() into two helper functions
COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
ram/COLO: Record the dirty pages that SVM received
COLO: Load VMState into qsb before restore it
COLO: Flush PVM's cached RAM into SVM's memory
COLO: Add checkpoint-delay parameter for migrate-set-parameters
COLO: synchronize PVM's state to SVM periodically
COLO failover: Introduce a new command to trigger a failover
COLO failover: Introduce state to record failover process
COLO: Implement failover work for Primary VM
COLO: Implement failover work for Secondary VM
qmp event: Add COLO_EXIT event to notify users while exited from COLO
COLO failover: Shutdown related socket fd when do failover
COLO failover: Don't do failover during loading VM's state
COLO: Process shutdown command for VM in COLO state
COLO: Update the global runstate after going into colo state
savevm: Split load vm state function qemu_loadvm_state
savevm: Introduce two helper functions for save/find loadvm_handlers
entry
COLO: Separate the process of saving/loading ram and device state
COLO: Split qemu_savevm_state_begin out of checkpoint process
net/filter-buffer: Add default filter-buffer for each netdev
filter-buffer: Accept zero interval
filter-buffer: Introduce a helper function to enable/disable default
filter
filter-buffer: Introduce a helper function to release packets
colo: Use default buffer-filter to buffer and release packets
COLO: Add block replication into colo process
configure | 11 +
docs/qmp-events.txt | 16 +
hmp-commands.hx | 15 +
hmp.c | 15 +
hmp.h | 1 +
include/exec/ram_addr.h | 9 +-
include/migration/colo.h | 40 +++
include/migration/failover.h | 33 ++
include/migration/migration.h | 21 +-
include/migration/qemu-file.h | 3 +-
include/net/filter.h | 12 +
include/net/net.h | 5 +
include/sysemu/sysemu.h | 9 +
migration/Makefile.objs | 2 +
migration/colo-comm.c | 71 ++++
migration/colo-failover.c | 83 +++++
migration/colo.c | 804 ++++++++++++++++++++++++++++++++++++++++++
migration/exec.c | 4 +-
migration/fd.c | 4 +-
migration/migration.c | 216 ++++++++----
migration/postcopy-ram.c | 6 +-
migration/qemu-file-buf.c | 61 ++++
migration/ram.c | 213 +++++++++--
migration/rdma.c | 2 +-
migration/savevm.c | 248 +++++++++----
migration/tcp.c | 4 +-
migration/unix.c | 4 +-
net/filter-buffer.c | 127 ++++++-
net/filter.c | 6 +-
net/net.c | 58 +++
qapi-schema.json | 104 +++++-
qapi/event.json | 15 +
qmp-commands.hx | 24 +-
stubs/Makefile.objs | 1 +
stubs/migration-colo.c | 45 +++
trace-events | 10 +
vl.c | 30 +-
37 files changed, 2135 insertions(+), 197 deletions(-)
create mode 100644 include/migration/colo.h
create mode 100644 include/migration/failover.h
create mode 100644 migration/colo-comm.c
create mode 100644 migration/colo-failover.c
create mode 100644 migration/colo.c
create mode 100644 stubs/migration-colo.c
--
1.8.3.1
^ permalink raw reply [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 01/39] configure: Add parameter for configure to enable/disable COLO support
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
@ 2015-12-29 7:08 ` zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 02/39] migration: Introduce capability 'x-colo' to migration zhanghailiang
` (38 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:08 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
configure --enable-colo/--disable-colo to switch COLO
support on/off.
COLO support is On by default.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Turn COLO on in default (Eric's suggestion)
---
configure | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/configure b/configure
index 83b40fc..f9e021a 100755
--- a/configure
+++ b/configure
@@ -260,6 +260,7 @@ xfs=""
vhost_net="no"
vhost_scsi="no"
kvm="no"
+colo="yes"
rdma=""
gprof="no"
debug_tcg="no"
@@ -939,6 +940,10 @@ for opt do
;;
--enable-kvm) kvm="yes"
;;
+ --disable-colo) colo="no"
+ ;;
+ --enable-colo) colo="yes"
+ ;;
--disable-tcg-interpreter) tcg_interpreter="no"
;;
--enable-tcg-interpreter) tcg_interpreter="yes"
@@ -1362,6 +1367,7 @@ disabled with --disable-FEATURE, default is enabled if available:
fdt fdt device tree
bluez bluez stack connectivity
kvm KVM acceleration support
+ colo COarse-grain LOck-stepping VM for Non-stop Service
rdma RDMA-based migration support
uuid uuid support
vde support for vde network
@@ -4804,6 +4810,7 @@ echo "Linux AIO support $linux_aio"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "KVM support $kvm"
+echo "COLO support $colo"
echo "RDMA support $rdma"
echo "TCG interpreter $tcg_interpreter"
echo "fdt support $fdt"
@@ -5396,6 +5403,10 @@ if have_backend "ftrace"; then
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
+if test "$colo" = "yes"; then
+ echo "CONFIG_COLO=y" >> $config_host_mak
+fi
+
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
fi
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 02/39] migration: Introduce capability 'x-colo' to migration
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 01/39] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
@ 2015-12-29 7:08 ` zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 03/39] COLO: migrate colo related info to secondary node zhanghailiang
` (37 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:08 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
hongyang.yang
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
v10:
- Rename capability 'colo' to experimental 'x-colo' (Eric's suggestion).
- Rename migrate_enable_colo() to migrate_colo_enabled() (Eric's suggestion).
---
include/migration/colo.h | 20 ++++++++++++++++++++
include/migration/migration.h | 1 +
migration/Makefile.objs | 1 +
migration/colo.c | 18 ++++++++++++++++++
migration/migration.c | 17 +++++++++++++++++
qapi-schema.json | 6 +++++-
qmp-commands.hx | 1 +
stubs/Makefile.objs | 1 +
stubs/migration-colo.c | 18 ++++++++++++++++++
9 files changed, 82 insertions(+), 1 deletion(-)
create mode 100644 include/migration/colo.h
create mode 100644 migration/colo.c
create mode 100644 stubs/migration-colo.c
diff --git a/include/migration/colo.h b/include/migration/colo.h
new file mode 100644
index 0000000..c60a590
--- /dev/null
+++ b/include/migration/colo.h
@@ -0,0 +1,20 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_COLO_H
+#define QEMU_COLO_H
+
+#include "qemu-common.h"
+
+bool colo_supported(void);
+
+#endif
diff --git a/include/migration/migration.h b/include/migration/migration.h
index d9494b8..f9e8151 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -268,6 +268,7 @@ int xbzrle_decode_buffer(uint8_t *src, int slen, uint8_t *dst, int dlen);
int migrate_use_xbzrle(void);
int64_t migrate_xbzrle_cache_size(void);
+bool migrate_colo_enabled(void);
int64_t xbzrle_cache_resize(int64_t new_size);
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 0cac6d7..65ecc35 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,4 +1,5 @@
common-obj-y += migration.o tcp.o
+common-obj-$(CONFIG_COLO) += colo.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo.c b/migration/colo.c
new file mode 100644
index 0000000..2c40d2e
--- /dev/null
+++ b/migration/colo.c
@@ -0,0 +1,18 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "migration/colo.h"
+
+bool colo_supported(void)
+{
+ return true;
+}
diff --git a/migration/migration.c b/migration/migration.c
index c842499..1b9a9c9 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -33,6 +33,7 @@
#include "qom/cpu.h"
#include "exec/memory.h"
#include "exec/address-spaces.h"
+#include "migration/colo.h"
#define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */
@@ -480,6 +481,9 @@ MigrationCapabilityStatusList *qmp_query_migrate_capabilities(Error **errp)
caps = NULL; /* silence compiler warning */
for (i = 0; i < MIGRATION_CAPABILITY__MAX; i++) {
+ if (i == MIGRATION_CAPABILITY_X_COLO && !colo_supported()) {
+ continue;
+ }
if (head == NULL) {
head = g_malloc0(sizeof(*caps));
caps = head;
@@ -679,6 +683,13 @@ void qmp_migrate_set_capabilities(MigrationCapabilityStatusList *params,
}
for (cap = params; cap; cap = cap->next) {
+ if (cap->value->capability == MIGRATION_CAPABILITY_X_COLO &&
+ !colo_supported()) {
+ error_setg(errp, "COLO is not currently supported, please"
+ " configure with --enable-colo option in order to"
+ " support COLO feature");
+ continue;
+ }
s->enabled_capabilities[cap->value->capability] = cap->value->state;
}
@@ -1581,6 +1592,12 @@ fail:
migrate_set_state(s, current_active_state, MIGRATION_STATUS_FAILED);
}
+bool migrate_colo_enabled(void)
+{
+ MigrationState *s = migrate_get_current();
+ return s->enabled_capabilities[MIGRATION_CAPABILITY_X_COLO];
+}
+
/*
* Master migration thread on the source VM.
* It drives the migration and pumps the data down the outgoing channel.
diff --git a/qapi-schema.json b/qapi-schema.json
index 2e31733..e768a04 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -544,11 +544,15 @@
# been migrated, pulling the remaining pages along as needed. NOTE: If
# the migration fails during postcopy the VM will fail. (since 2.5)
#
+# @x-colo: If enabled, migration will never end, and the state of the VM on the
+# primary side will be migrated continuously to the VM on secondary
+# side. (since 2.6)
+#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
- 'compress', 'events', 'x-postcopy-ram'] }
+ 'compress', 'events', 'x-postcopy-ram', 'x-colo'] }
##
# @MigrationCapabilityStatus
diff --git a/qmp-commands.hx b/qmp-commands.hx
index efee0ca..9e2a764 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3627,6 +3627,7 @@ Query current migration capabilities
- "rdma-pin-all" : RDMA Pin Page state (json-bool)
- "auto-converge" : Auto Converge state (json-bool)
- "zero-blocks" : Zero Blocks state (json-bool)
+ - "x-colo" : COarse-Grain LOck Stepping for Non-stop Service (json-bool)
Arguments:
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index d7898a0..12eb4c6 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -38,3 +38,4 @@ stub-obj-y += qmp_pc_dimm_device_list.o
stub-obj-y += target-monitor-defs.o
stub-obj-y += target-get-monitor-def.o
stub-obj-y += vhost.o
+stub-obj-y += migration-colo.o
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
new file mode 100644
index 0000000..3d817df
--- /dev/null
+++ b/stubs/migration-colo.c
@@ -0,0 +1,18 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "migration/colo.h"
+
+bool colo_supported(void)
+{
+ return false;
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 03/39] COLO: migrate colo related info to secondary node
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 01/39] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 02/39] migration: Introduce capability 'x-colo' to migration zhanghailiang
@ 2015-12-29 7:08 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 04/39] migration: Export migrate_set_state() zhanghailiang
` (36 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:08 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We can know if VM in destination should go into COLO mode by refer to
the info that been migrated from PVM.
We skip this section if colo is not enabled (i.e.
migrate_set_capability colo off), so that, It not break compatibility with migration
however the --enable-colo/disable-colo on the source/destination;
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Add Reviewed-by tag
v10:
- Use VMSTATE_BOOL instead of VMSTATE_UNIT32 for 'colo_requested' (Dave's suggestion).
---
include/migration/colo.h | 2 ++
migration/Makefile.objs | 1 +
migration/colo-comm.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++
vl.c | 3 ++-
4 files changed, 55 insertions(+), 1 deletion(-)
create mode 100644 migration/colo-comm.c
diff --git a/include/migration/colo.h b/include/migration/colo.h
index c60a590..9b6662d 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -14,7 +14,9 @@
#define QEMU_COLO_H
#include "qemu-common.h"
+#include "migration/migration.h"
bool colo_supported(void);
+void colo_info_mig_init(void);
#endif
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 65ecc35..81b5713 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,5 +1,6 @@
common-obj-y += migration.o tcp.o
common-obj-$(CONFIG_COLO) += colo.o
+common-obj-y += colo-comm.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
new file mode 100644
index 0000000..fb407e0
--- /dev/null
+++ b/migration/colo-comm.c
@@ -0,0 +1,50 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ *
+ */
+
+#include <migration/colo.h>
+#include "trace.h"
+
+typedef struct {
+ bool colo_requested;
+} COLOInfo;
+
+static COLOInfo colo_info;
+
+static void colo_info_pre_save(void *opaque)
+{
+ COLOInfo *s = opaque;
+
+ s->colo_requested = migrate_colo_enabled();
+}
+
+static bool colo_info_need(void *opaque)
+{
+ return migrate_colo_enabled();
+}
+
+static const VMStateDescription colo_state = {
+ .name = "COLOState",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .pre_save = colo_info_pre_save,
+ .needed = colo_info_need,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(colo_requested, COLOInfo),
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+void colo_info_mig_init(void)
+{
+ vmstate_register(NULL, 0, &colo_state, &colo_info);
+}
diff --git a/vl.c b/vl.c
index 5aaea77..5ac49ce 100644
--- a/vl.c
+++ b/vl.c
@@ -91,6 +91,7 @@ int main(int argc, char **argv)
#include "sysemu/dma.h"
#include "audio/audio.h"
#include "migration/migration.h"
+#include "migration/colo.h"
#include "sysemu/kvm.h"
#include "qapi/qmp/qjson.h"
#include "qemu/option.h"
@@ -4450,7 +4451,7 @@ int main(int argc, char **argv, char **envp)
blk_mig_init();
ram_mig_init();
-
+ colo_info_mig_init();
/* If the currently selected machine wishes to override the units-per-bus
* property of its default HBA interface type, do so now. */
if (machine_class->units_per_default_bus) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 04/39] migration: Export migrate_set_state()
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (2 preceding siblings ...)
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 03/39] COLO: migrate colo related info to secondary node zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 05/39] migration: Add state records for migration incoming zhanghailiang
` (35 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Fix the first parameter of migrate_set_state(), and export it.
We will use it in later.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- New patch which is split from patch
'migration: Add state records for migration incoming' (Juan's suggestion)
---
include/migration/migration.h | 2 ++
migration/migration.c | 36 +++++++++++++++++++++---------------
2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index f9e8151..e102fe4 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -169,6 +169,8 @@ struct MigrationState
RAMBlock *last_req_rb;
};
+void migrate_set_state(int *state, int old_state, int new_state);
+
void process_incoming_migration(QEMUFile *f);
void qemu_start_incoming_migration(const char *uri, Error **errp);
diff --git a/migration/migration.c b/migration/migration.c
index 1b9a9c9..388c62c 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -798,9 +798,9 @@ void qmp_migrate_start_postcopy(Error **errp)
/* shared migration helpers */
-static void migrate_set_state(MigrationState *s, int old_state, int new_state)
+void migrate_set_state(int *state, int old_state, int new_state)
{
- if (atomic_cmpxchg(&s->state, old_state, new_state) == old_state) {
+ if (atomic_cmpxchg(state, old_state, new_state) == old_state) {
trace_migrate_set_state(new_state);
migrate_generate_event(new_state);
}
@@ -833,7 +833,7 @@ static void migrate_fd_cleanup(void *opaque)
(s->state != MIGRATION_STATUS_POSTCOPY_ACTIVE));
if (s->state == MIGRATION_STATUS_CANCELLING) {
- migrate_set_state(s, MIGRATION_STATUS_CANCELLING,
+ migrate_set_state(&s->state, MIGRATION_STATUS_CANCELLING,
MIGRATION_STATUS_CANCELLED);
}
@@ -844,7 +844,8 @@ void migrate_fd_error(MigrationState *s)
{
trace_migrate_fd_error();
assert(s->file == NULL);
- migrate_set_state(s, MIGRATION_STATUS_SETUP, MIGRATION_STATUS_FAILED);
+ migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
+ MIGRATION_STATUS_FAILED);
notifier_list_notify(&migration_state_notifiers, s);
}
@@ -864,7 +865,7 @@ static void migrate_fd_cancel(MigrationState *s)
if (!migration_is_setup_or_active(old_state)) {
break;
}
- migrate_set_state(s, old_state, MIGRATION_STATUS_CANCELLING);
+ migrate_set_state(&s->state, old_state, MIGRATION_STATUS_CANCELLING);
} while (s->state != MIGRATION_STATUS_CANCELLING);
/*
@@ -938,7 +939,7 @@ MigrationState *migrate_init(const MigrationParams *params)
s->migration_thread_running = false;
s->last_req_rb = NULL;
- migrate_set_state(s, MIGRATION_STATUS_NONE, MIGRATION_STATUS_SETUP);
+ migrate_set_state(&s->state, MIGRATION_STATUS_NONE, MIGRATION_STATUS_SETUP);
QSIMPLEQ_INIT(&s->src_page_requests);
@@ -1037,7 +1038,8 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
} else {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "uri",
"a valid migration protocol");
- migrate_set_state(s, MIGRATION_STATUS_SETUP, MIGRATION_STATUS_FAILED);
+ migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
+ MIGRATION_STATUS_FAILED);
return;
}
@@ -1416,7 +1418,7 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
int ret;
const QEMUSizedBuffer *qsb;
int64_t time_at_stop = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
- migrate_set_state(ms, MIGRATION_STATUS_ACTIVE,
+ migrate_set_state(&ms->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_POSTCOPY_ACTIVE);
trace_postcopy_start();
@@ -1507,7 +1509,7 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
ret = qemu_file_get_error(ms->file);
if (ret) {
error_report("postcopy_start: Migration stream errored");
- migrate_set_state(ms, MIGRATION_STATUS_POSTCOPY_ACTIVE,
+ migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
MIGRATION_STATUS_FAILED);
}
@@ -1516,7 +1518,7 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
fail_closefb:
qemu_fclose(fb);
fail:
- migrate_set_state(ms, MIGRATION_STATUS_POSTCOPY_ACTIVE,
+ migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
MIGRATION_STATUS_FAILED);
qemu_mutex_unlock_iothread();
return -1;
@@ -1585,11 +1587,13 @@ static void migration_completion(MigrationState *s, int current_active_state,
goto fail;
}
- migrate_set_state(s, current_active_state, MIGRATION_STATUS_COMPLETED);
+ migrate_set_state(&s->state, current_active_state,
+ MIGRATION_STATUS_COMPLETED);
return;
fail:
- migrate_set_state(s, current_active_state, MIGRATION_STATUS_FAILED);
+ migrate_set_state(&s->state, current_active_state,
+ MIGRATION_STATUS_FAILED);
}
bool migrate_colo_enabled(void)
@@ -1640,7 +1644,8 @@ static void *migration_thread(void *opaque)
s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
current_active_state = MIGRATION_STATUS_ACTIVE;
- migrate_set_state(s, MIGRATION_STATUS_SETUP, MIGRATION_STATUS_ACTIVE);
+ migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
+ MIGRATION_STATUS_ACTIVE);
trace_migration_thread_setup_complete();
@@ -1683,7 +1688,8 @@ static void *migration_thread(void *opaque)
}
if (qemu_file_get_error(s->file)) {
- migrate_set_state(s, current_active_state, MIGRATION_STATUS_FAILED);
+ migrate_set_state(&s->state, current_active_state,
+ MIGRATION_STATUS_FAILED);
trace_migration_thread_file_err();
break;
}
@@ -1764,7 +1770,7 @@ void migrate_fd_connect(MigrationState *s)
if (migrate_postcopy_ram()) {
if (open_return_path_on_source(s)) {
error_report("Unable to open return-path for postcopy");
- migrate_set_state(s, MIGRATION_STATUS_SETUP,
+ migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
MIGRATION_STATUS_FAILED);
migrate_fd_cleanup(s);
return;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 05/39] migration: Add state records for migration incoming
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (3 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 04/39] migration: Export migrate_set_state() zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 06/39] migration: Integrate COLO checkpoint process into migration zhanghailiang
` (34 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
For migration destination, we also need to know its state,
we will use it in COLO.
Here we add a new member 'state' for MigrationIncomingState,
and also use migrate_set_state() to modify its value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Split exporting migrate_set_state() part into a new patch (Juan's suggestion)
---
include/migration/migration.h | 1 +
migration/migration.c | 14 +++++++++-----
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index e102fe4..82dbb08 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -105,6 +105,7 @@ struct MigrationIncomingState {
QemuMutex rp_mutex; /* We send replies from multiple threads */
void *postcopy_tmp_page;
+ int state;
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
};
diff --git a/migration/migration.c b/migration/migration.c
index 388c62c..159d3f5 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -112,6 +112,7 @@ MigrationIncomingState *migration_incoming_state_new(QEMUFile* f)
{
mis_current = g_new0(MigrationIncomingState, 1);
mis_current->from_src_file = f;
+ mis_current->state = MIGRATION_STATUS_NONE;
QLIST_INIT(&mis_current->loadvm_handlers);
qemu_mutex_init(&mis_current->rp_mutex);
qemu_event_init(&mis_current->main_thread_load_event, false);
@@ -332,8 +333,8 @@ static void process_incoming_migration_co(void *opaque)
mis = migration_incoming_state_new(f);
postcopy_state_set(POSTCOPY_INCOMING_NONE);
- migrate_generate_event(MIGRATION_STATUS_ACTIVE);
-
+ migrate_set_state(&mis->state, MIGRATION_STATUS_NONE,
+ MIGRATION_STATUS_ACTIVE);
ret = qemu_loadvm_state(f);
ps = postcopy_state_get();
@@ -362,7 +363,8 @@ static void process_incoming_migration_co(void *opaque)
migration_incoming_state_destroy();
if (ret < 0) {
- migrate_generate_event(MIGRATION_STATUS_FAILED);
+ migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_FAILED);
error_report("load of migration failed: %s", strerror(-ret));
migrate_decompress_threads_join();
exit(EXIT_FAILURE);
@@ -371,7 +373,8 @@ static void process_incoming_migration_co(void *opaque)
/* Make sure all file formats flush their mutable metadata */
bdrv_invalidate_cache_all(&local_err);
if (local_err) {
- migrate_generate_event(MIGRATION_STATUS_FAILED);
+ migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_FAILED);
error_report_err(local_err);
migrate_decompress_threads_join();
exit(EXIT_FAILURE);
@@ -403,7 +406,8 @@ static void process_incoming_migration_co(void *opaque)
* observer sees this event they might start to prod at the VM assuming
* it's ready to use.
*/
- migrate_generate_event(MIGRATION_STATUS_COMPLETED);
+ migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_COMPLETED);
}
void process_incoming_migration(QEMUFile *f)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 06/39] migration: Integrate COLO checkpoint process into migration
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (4 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 05/39] migration: Add state records for migration incoming zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 07/39] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
` (33 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Add a migrate state: MIGRATION_STATUS_COLO, enter this migration state
after the first live migration successfully finished.
We reuse migration thread, so if colo is enabled by user, migration thread will
go into the process of colo.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- Rebase to master
- Add Reviewed-by tag
v10:
- Simplify process by dropping colo thread and reusing migration thread.
(Dave's suggestion)
---
include/migration/colo.h | 3 +++
migration/colo.c | 31 +++++++++++++++++++++++++++++++
migration/migration.c | 30 ++++++++++++++++++++++++++----
qapi-schema.json | 4 +++-
stubs/migration-colo.c | 9 +++++++++
trace-events | 3 +++
6 files changed, 75 insertions(+), 5 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 9b6662d..f462f06 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -19,4 +19,7 @@
bool colo_supported(void);
void colo_info_mig_init(void);
+void migrate_start_colo_process(MigrationState *s);
+bool migration_in_colo_state(void);
+
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 2c40d2e..cf0ccb8 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -10,9 +10,40 @@
* later. See the COPYING file in the top-level directory.
*/
+#include "sysemu/sysemu.h"
#include "migration/colo.h"
+#include "trace.h"
bool colo_supported(void)
{
return true;
}
+
+bool migration_in_colo_state(void)
+{
+ MigrationState *s = migrate_get_current();
+
+ return (s->state == MIGRATION_STATUS_COLO);
+}
+
+static void colo_process_checkpoint(MigrationState *s)
+{
+ qemu_mutex_lock_iothread();
+ vm_start();
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("stop", "run");
+
+ /*TODO: COLO checkpoint savevm loop*/
+
+ migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+}
+
+void migrate_start_colo_process(MigrationState *s)
+{
+ qemu_mutex_unlock_iothread();
+ migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_COLO);
+ colo_process_checkpoint(s);
+ qemu_mutex_lock_iothread();
+}
diff --git a/migration/migration.c b/migration/migration.c
index 159d3f5..1a8d3f1 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -640,6 +640,10 @@ MigrationInfo *qmp_query_migrate(Error **errp)
get_xbzrle_cache_stats(info);
break;
+ case MIGRATION_STATUS_COLO:
+ info->has_status = true;
+ /* TODO: display COLO specific information (checkpoint info etc.) */
+ break;
case MIGRATION_STATUS_COMPLETED:
get_xbzrle_cache_stats(info);
@@ -999,7 +1003,8 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,
params.shared = has_inc && inc;
if (migration_is_setup_or_active(s->state) ||
- s->state == MIGRATION_STATUS_CANCELLING) {
+ s->state == MIGRATION_STATUS_CANCELLING ||
+ s->state == MIGRATION_STATUS_COLO) {
error_setg(errp, QERR_MIGRATION_ACTIVE);
return;
}
@@ -1591,8 +1596,11 @@ static void migration_completion(MigrationState *s, int current_active_state,
goto fail;
}
- migrate_set_state(&s->state, current_active_state,
- MIGRATION_STATUS_COMPLETED);
+ if (!migrate_colo_enabled()) {
+ migrate_set_state(&s->state, current_active_state,
+ MIGRATION_STATUS_COMPLETED);
+ }
+
return;
fail:
@@ -1624,6 +1632,7 @@ static void *migration_thread(void *opaque)
bool entered_postcopy = false;
/* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
enum MigrationStatus current_active_state = MIGRATION_STATUS_ACTIVE;
+ bool enable_colo = migrate_colo_enabled();
rcu_register_thread();
@@ -1731,7 +1740,11 @@ static void *migration_thread(void *opaque)
end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
qemu_mutex_lock_iothread();
- qemu_savevm_state_cleanup();
+ /* The resource has been allocated by migration will be reused in COLO
+ process, so don't release them. */
+ if (!enable_colo) {
+ qemu_savevm_state_cleanup();
+ }
if (s->state == MIGRATION_STATUS_COMPLETED) {
uint64_t transferred_bytes = qemu_ftell(s->file);
s->total_time = end_time - s->total_time;
@@ -1744,6 +1757,15 @@ static void *migration_thread(void *opaque)
}
runstate_set(RUN_STATE_POSTMIGRATE);
} else {
+ if (s->state == MIGRATION_STATUS_ACTIVE && enable_colo) {
+ migrate_start_colo_process(s);
+ qemu_savevm_state_cleanup();
+ /*
+ * Fixme: we will run VM in COLO no matter its old running state.
+ * After exited COLO, we will keep running.
+ */
+ old_vm_running = true;
+ }
if (old_vm_running && !entered_postcopy) {
vm_start();
}
diff --git a/qapi-schema.json b/qapi-schema.json
index e768a04..6eefad2 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -434,12 +434,14 @@
#
# @failed: some error occurred during migration process.
#
+# @colo: VM is in the process of fault tolerance. (since 2.6)
+#
# Since: 2.3
#
##
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
- 'active', 'postcopy-active', 'completed', 'failed' ] }
+ 'active', 'postcopy-active', 'completed', 'failed', 'colo' ] }
##
# @MigrationInfo
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index 3d817df..acddca6 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -16,3 +16,12 @@ bool colo_supported(void)
{
return false;
}
+
+bool migration_in_colo_state(void)
+{
+ return false;
+}
+
+void migrate_start_colo_process(MigrationState *s)
+{
+}
diff --git a/trace-events b/trace-events
index 6f03638..57ddc8f 100644
--- a/trace-events
+++ b/trace-events
@@ -1579,6 +1579,9 @@ postcopy_ram_incoming_cleanup_entry(void) ""
postcopy_ram_incoming_cleanup_exit(void) ""
postcopy_ram_incoming_cleanup_join(void) ""
+# migration/colo.c
+colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
+
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
kvm_vm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 07/39] migration: Integrate COLO checkpoint process into loadvm
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (5 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 06/39] migration: Integrate COLO checkpoint process into migration zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 08/39] migration: Rename the'file' member of MigrationState zhanghailiang
` (32 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.
We add three new members to struct MigrationIncomingState, 'have_colo_incoming_thread'
and 'colo_incoming_thread' record the colo related threads for secondary VM,
'migration_incoming_co' records the original migration incoming coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- We moved the place of bdrv_invalidate_cache_all(), but done the deleting work
in other patch. Fix it.
- Add documentation for colo in 'MigrationStatus' (Eric's review comment)
v10:
- fix a bug about fd leak which is found by Dave.
---
include/migration/colo.h | 7 +++++++
include/migration/migration.h | 7 +++++++
migration/colo-comm.c | 10 ++++++++++
migration/colo.c | 22 ++++++++++++++++++++++
migration/migration.c | 31 +++++++++++++++++++++----------
stubs/migration-colo.c | 10 ++++++++++
6 files changed, 77 insertions(+), 10 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index f462f06..2676c4a 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -15,6 +15,8 @@
#include "qemu-common.h"
#include "migration/migration.h"
+#include "qemu/coroutine_int.h"
+#include "qemu/thread.h"
bool colo_supported(void);
void colo_info_mig_init(void);
@@ -22,4 +24,9 @@ void colo_info_mig_init(void);
void migrate_start_colo_process(MigrationState *s);
bool migration_in_colo_state(void);
+/* loadvm */
+bool migration_incoming_enable_colo(void);
+void migration_incoming_exit_colo(void);
+void *colo_process_incoming_thread(void *opaque);
+bool migration_incoming_in_colo_state(void);
#endif
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 82dbb08..b5cda23 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -22,6 +22,7 @@
#include "migration/vmstate.h"
#include "qapi-types.h"
#include "exec/cpu-common.h"
+#include "qemu/coroutine_int.h"
#define QEMU_VM_FILE_MAGIC 0x5145564d
#define QEMU_VM_FILE_VERSION_COMPAT 0x00000002
@@ -106,6 +107,12 @@ struct MigrationIncomingState {
void *postcopy_tmp_page;
int state;
+
+ bool have_colo_incoming_thread;
+ QemuThread colo_incoming_thread;
+ /* The coroutine we should enter (back) after failover */
+ Coroutine *migration_incoming_co;
+
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
};
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
index fb407e0..30df3d3 100644
--- a/migration/colo-comm.c
+++ b/migration/colo-comm.c
@@ -48,3 +48,13 @@ void colo_info_mig_init(void)
{
vmstate_register(NULL, 0, &colo_state, &colo_info);
}
+
+bool migration_incoming_enable_colo(void)
+{
+ return colo_info.colo_requested;
+}
+
+void migration_incoming_exit_colo(void)
+{
+ colo_info.colo_requested = 0;
+}
diff --git a/migration/colo.c b/migration/colo.c
index cf0ccb8..6880aa0 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -13,6 +13,7 @@
#include "sysemu/sysemu.h"
#include "migration/colo.h"
#include "trace.h"
+#include "qemu/error-report.h"
bool colo_supported(void)
{
@@ -26,6 +27,13 @@ bool migration_in_colo_state(void)
return (s->state == MIGRATION_STATUS_COLO);
}
+bool migration_incoming_in_colo_state(void)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+
+ return mis && (mis->state == MIGRATION_STATUS_COLO);
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
qemu_mutex_lock_iothread();
@@ -47,3 +55,17 @@ void migrate_start_colo_process(MigrationState *s)
colo_process_checkpoint(s);
qemu_mutex_lock_iothread();
}
+
+void *colo_process_incoming_thread(void *opaque)
+{
+ MigrationIncomingState *mis = opaque;
+
+ migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
+ MIGRATION_STATUS_COLO);
+
+ /* TODO: COLO checkpoint restore loop */
+
+ migration_incoming_exit_colo();
+
+ return NULL;
+}
diff --git a/migration/migration.c b/migration/migration.c
index 1a8d3f1..4027071 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -358,6 +358,27 @@ static void process_incoming_migration_co(void *opaque)
/* Else if something went wrong then just fall out of the normal exit */
}
+ if (!ret) {
+ /* Make sure all file formats flush their mutable metadata */
+ bdrv_invalidate_cache_all(&local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ migrate_decompress_threads_join();
+ exit(EXIT_FAILURE);
+ }
+ }
+ /* we get colo info, and know if we are in colo mode */
+ if (!ret && migration_incoming_enable_colo()) {
+ mis->migration_incoming_co = qemu_coroutine_self();
+ qemu_thread_create(&mis->colo_incoming_thread, "colo incoming",
+ colo_process_incoming_thread, mis, QEMU_THREAD_JOINABLE);
+ mis->have_colo_incoming_thread = true;
+ qemu_coroutine_yield();
+
+ /* Wait checkpoint incoming thread exit before free resource */
+ qemu_thread_join(&mis->colo_incoming_thread);
+ }
+
qemu_fclose(f);
free_xbzrle_decoded_buf();
migration_incoming_state_destroy();
@@ -370,16 +391,6 @@ static void process_incoming_migration_co(void *opaque)
exit(EXIT_FAILURE);
}
- /* Make sure all file formats flush their mutable metadata */
- bdrv_invalidate_cache_all(&local_err);
- if (local_err) {
- migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
- MIGRATION_STATUS_FAILED);
- error_report_err(local_err);
- migrate_decompress_threads_join();
- exit(EXIT_FAILURE);
- }
-
/*
* This must happen after all error conditions are dealt with and
* we're sure the VM is going to be running on this host.
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index acddca6..c12516e 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -22,6 +22,16 @@ bool migration_in_colo_state(void)
return false;
}
+bool migration_incoming_in_colo_state(void)
+{
+ return false;
+}
+
void migrate_start_colo_process(MigrationState *s)
{
}
+
+void *colo_process_incoming_thread(void *opaque)
+{
+ return NULL;
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 08/39] migration: Rename the'file' member of MigrationState
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (6 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 07/39] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 09/39] COLO/migration: Create a new communication path from destination to source zhanghailiang
` (31 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Rename the 'file' member of MigrationState to 'to_dst_file'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
- Add the missed modification for RDMA migration. (Found by Wen Congyang)
v11:
- Only rename 'file' member of MigrationState
---
include/migration/migration.h | 2 +-
migration/exec.c | 4 +--
migration/fd.c | 4 +--
migration/migration.c | 72 ++++++++++++++++++++++---------------------
migration/postcopy-ram.c | 6 ++--
migration/rdma.c | 2 +-
migration/savevm.c | 2 +-
migration/tcp.c | 4 +--
migration/unix.c | 4 +--
9 files changed, 52 insertions(+), 48 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index b5cda23..e7a516c 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -140,7 +140,7 @@ struct MigrationState
size_t xfer_limit;
QemuThread thread;
QEMUBH *cleanup_bh;
- QEMUFile *file;
+ QEMUFile *to_dst_file;
int parameters[MIGRATION_PARAMETER__MAX];
int state;
diff --git a/migration/exec.c b/migration/exec.c
index 8406d2b..9037109 100644
--- a/migration/exec.c
+++ b/migration/exec.c
@@ -36,8 +36,8 @@
void exec_start_outgoing_migration(MigrationState *s, const char *command, Error **errp)
{
- s->file = qemu_popen_cmd(command, "w");
- if (s->file == NULL) {
+ s->to_dst_file = qemu_popen_cmd(command, "w");
+ if (s->to_dst_file == NULL) {
error_setg_errno(errp, errno, "failed to popen the migration target");
return;
}
diff --git a/migration/fd.c b/migration/fd.c
index 3e4bed0..9a9d6c5 100644
--- a/migration/fd.c
+++ b/migration/fd.c
@@ -50,9 +50,9 @@ void fd_start_outgoing_migration(MigrationState *s, const char *fdname, Error **
}
if (fd_is_socket(fd)) {
- s->file = qemu_fopen_socket(fd, "wb");
+ s->to_dst_file = qemu_fopen_socket(fd, "wb");
} else {
- s->file = qemu_fdopen(fd, "wb");
+ s->to_dst_file = qemu_fdopen(fd, "wb");
}
migrate_fd_connect(s);
diff --git a/migration/migration.c b/migration/migration.c
index 4027071..b2c07c6 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -834,7 +834,7 @@ static void migrate_fd_cleanup(void *opaque)
flush_page_queue(s);
- if (s->file) {
+ if (s->to_dst_file) {
trace_migrate_fd_cleanup();
qemu_mutex_unlock_iothread();
if (s->migration_thread_running) {
@@ -844,8 +844,8 @@ static void migrate_fd_cleanup(void *opaque)
qemu_mutex_lock_iothread();
migrate_compress_threads_join();
- qemu_fclose(s->file);
- s->file = NULL;
+ qemu_fclose(s->to_dst_file);
+ s->to_dst_file = NULL;
}
assert((s->state != MIGRATION_STATUS_ACTIVE) &&
@@ -862,7 +862,7 @@ static void migrate_fd_cleanup(void *opaque)
void migrate_fd_error(MigrationState *s)
{
trace_migrate_fd_error();
- assert(s->file == NULL);
+ assert(s->to_dst_file == NULL);
migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
MIGRATION_STATUS_FAILED);
notifier_list_notify(&migration_state_notifiers, s);
@@ -871,7 +871,7 @@ void migrate_fd_error(MigrationState *s)
static void migrate_fd_cancel(MigrationState *s)
{
int old_state ;
- QEMUFile *f = migrate_get_current()->file;
+ QEMUFile *f = migrate_get_current()->to_dst_file;
trace_migrate_fd_cancel();
if (s->rp_state.from_dst_file) {
@@ -942,7 +942,7 @@ MigrationState *migrate_init(const MigrationParams *params)
s->bytes_xfer = 0;
s->xfer_limit = 0;
s->cleanup_bh = 0;
- s->file = NULL;
+ s->to_dst_file = NULL;
s->state = MIGRATION_STATUS_NONE;
s->params = *params;
s->rp_state.from_dst_file = NULL;
@@ -1122,8 +1122,9 @@ void qmp_migrate_set_speed(int64_t value, Error **errp)
s = migrate_get_current();
s->bandwidth_limit = value;
- if (s->file) {
- qemu_file_set_rate_limit(s->file, s->bandwidth_limit / XFER_LIMIT_RATIO);
+ if (s->to_dst_file) {
+ qemu_file_set_rate_limit(s->to_dst_file,
+ s->bandwidth_limit / XFER_LIMIT_RATIO);
}
}
@@ -1393,7 +1394,7 @@ out:
static int open_return_path_on_source(MigrationState *ms)
{
- ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->file);
+ ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file);
if (!ms->rp_state.from_dst_file) {
return -1;
}
@@ -1415,7 +1416,7 @@ static int await_return_path_close_on_source(MigrationState *ms)
* rp_thread will exit, however if there's an error we need to cause
* it to exit.
*/
- if (qemu_file_get_error(ms->file) && ms->rp_state.from_dst_file) {
+ if (qemu_file_get_error(ms->to_dst_file) && ms->rp_state.from_dst_file) {
/*
* shutdown(2), if we have it, will cause it to unblock if it's stuck
* waiting for the destination.
@@ -1458,7 +1459,7 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
* Cause any non-postcopiable, but iterative devices to
* send out their final data.
*/
- qemu_savevm_state_complete_precopy(ms->file, true);
+ qemu_savevm_state_complete_precopy(ms->to_dst_file, true);
/*
* in Finish migrate and with the io-lock held everything should
@@ -1476,9 +1477,9 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
* will notice we're in POSTCOPY_ACTIVE and not actually
* wrap their state up here
*/
- qemu_file_set_rate_limit(ms->file, INT64_MAX);
+ qemu_file_set_rate_limit(ms->to_dst_file, INT64_MAX);
/* Ping just for debugging, helps line traces up */
- qemu_savevm_send_ping(ms->file, 2);
+ qemu_savevm_send_ping(ms->to_dst_file, 2);
/*
* While loading the device state we may trigger page transfer
@@ -1512,7 +1513,7 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
qsb = qemu_buf_get(fb);
/* Now send that blob */
- if (qemu_savevm_send_packaged(ms->file, qsb)) {
+ if (qemu_savevm_send_packaged(ms->to_dst_file, qsb)) {
goto fail_closefb;
}
qemu_fclose(fb);
@@ -1524,9 +1525,9 @@ static int postcopy_start(MigrationState *ms, bool *old_vm_running)
* Although this ping is just for debug, it could potentially be
* used for getting a better measurement of downtime at the source.
*/
- qemu_savevm_send_ping(ms->file, 4);
+ qemu_savevm_send_ping(ms->to_dst_file, 4);
- ret = qemu_file_get_error(ms->file);
+ ret = qemu_file_get_error(ms->to_dst_file);
if (ret) {
error_report("postcopy_start: Migration stream errored");
migrate_set_state(&ms->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
@@ -1569,8 +1570,8 @@ static void migration_completion(MigrationState *s, int current_active_state,
if (!ret) {
ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
if (ret >= 0) {
- qemu_file_set_rate_limit(s->file, INT64_MAX);
- qemu_savevm_state_complete_precopy(s->file, false);
+ qemu_file_set_rate_limit(s->to_dst_file, INT64_MAX);
+ qemu_savevm_state_complete_precopy(s->to_dst_file, false);
}
}
qemu_mutex_unlock_iothread();
@@ -1581,7 +1582,7 @@ static void migration_completion(MigrationState *s, int current_active_state,
} else if (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) {
trace_migration_completion_postcopy_end();
- qemu_savevm_state_complete_postcopy(s->file);
+ qemu_savevm_state_complete_postcopy(s->to_dst_file);
trace_migration_completion_postcopy_end_after_complete();
}
@@ -1602,7 +1603,7 @@ static void migration_completion(MigrationState *s, int current_active_state,
}
}
- if (qemu_file_get_error(s->file)) {
+ if (qemu_file_get_error(s->to_dst_file)) {
trace_migration_completion_file_err();
goto fail;
}
@@ -1647,24 +1648,24 @@ static void *migration_thread(void *opaque)
rcu_register_thread();
- qemu_savevm_state_header(s->file);
+ qemu_savevm_state_header(s->to_dst_file);
if (migrate_postcopy_ram()) {
/* Now tell the dest that it should open its end so it can reply */
- qemu_savevm_send_open_return_path(s->file);
+ qemu_savevm_send_open_return_path(s->to_dst_file);
/* And do a ping that will make stuff easier to debug */
- qemu_savevm_send_ping(s->file, 1);
+ qemu_savevm_send_ping(s->to_dst_file, 1);
/*
* Tell the destination that we *might* want to do postcopy later;
* if the other end can't do postcopy it should fail now, nice and
* early.
*/
- qemu_savevm_send_postcopy_advise(s->file);
+ qemu_savevm_send_postcopy_advise(s->to_dst_file);
}
- qemu_savevm_state_begin(s->file, &s->params);
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
current_active_state = MIGRATION_STATUS_ACTIVE;
@@ -1678,10 +1679,10 @@ static void *migration_thread(void *opaque)
int64_t current_time;
uint64_t pending_size;
- if (!qemu_file_rate_limit(s->file)) {
+ if (!qemu_file_rate_limit(s->to_dst_file)) {
uint64_t pend_post, pend_nonpost;
- qemu_savevm_state_pending(s->file, max_size, &pend_nonpost,
+ qemu_savevm_state_pending(s->to_dst_file, max_size, &pend_nonpost,
&pend_post);
pending_size = pend_nonpost + pend_post;
trace_migrate_pending(pending_size, max_size,
@@ -1702,7 +1703,7 @@ static void *migration_thread(void *opaque)
continue;
}
/* Just another iteration step */
- qemu_savevm_state_iterate(s->file, entered_postcopy);
+ qemu_savevm_state_iterate(s->to_dst_file, entered_postcopy);
} else {
trace_migration_thread_low_pending(pending_size);
migration_completion(s, current_active_state,
@@ -1711,7 +1712,7 @@ static void *migration_thread(void *opaque)
}
}
- if (qemu_file_get_error(s->file)) {
+ if (qemu_file_get_error(s->to_dst_file)) {
migrate_set_state(&s->state, current_active_state,
MIGRATION_STATUS_FAILED);
trace_migration_thread_file_err();
@@ -1719,7 +1720,8 @@ static void *migration_thread(void *opaque)
}
current_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
if (current_time >= initial_time + BUFFER_DELAY) {
- uint64_t transferred_bytes = qemu_ftell(s->file) - initial_bytes;
+ uint64_t transferred_bytes = qemu_ftell(s->to_dst_file) -
+ initial_bytes;
uint64_t time_spent = current_time - initial_time;
double bandwidth = (double)transferred_bytes / time_spent;
max_size = bandwidth * migrate_max_downtime() / 1000000;
@@ -1735,11 +1737,11 @@ static void *migration_thread(void *opaque)
s->expected_downtime = s->dirty_bytes_rate / bandwidth;
}
- qemu_file_reset_rate_limit(s->file);
+ qemu_file_reset_rate_limit(s->to_dst_file);
initial_time = current_time;
- initial_bytes = qemu_ftell(s->file);
+ initial_bytes = qemu_ftell(s->to_dst_file);
}
- if (qemu_file_rate_limit(s->file)) {
+ if (qemu_file_rate_limit(s->to_dst_file)) {
/* usleep expects microseconds */
g_usleep((initial_time + BUFFER_DELAY - current_time)*1000);
}
@@ -1757,7 +1759,7 @@ static void *migration_thread(void *opaque)
qemu_savevm_state_cleanup();
}
if (s->state == MIGRATION_STATUS_COMPLETED) {
- uint64_t transferred_bytes = qemu_ftell(s->file);
+ uint64_t transferred_bytes = qemu_ftell(s->to_dst_file);
s->total_time = end_time - s->total_time;
if (!entered_postcopy) {
s->downtime = end_time - start_time;
@@ -1794,7 +1796,7 @@ void migrate_fd_connect(MigrationState *s)
s->expected_downtime = max_downtime/1000000;
s->cleanup_bh = qemu_bh_new(migrate_fd_cleanup, s);
- qemu_file_set_rate_limit(s->file,
+ qemu_file_set_rate_limit(s->to_dst_file,
s->bandwidth_limit / XFER_LIMIT_RATIO);
/* Notify before starting migration thread */
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index 3946aa9..0c88006 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -727,7 +727,8 @@ void postcopy_discard_send_range(MigrationState *ms, PostcopyDiscardState *pds,
if (pds->cur_entry == MAX_DISCARDS_PER_COMMAND) {
/* Full set, ship it! */
- qemu_savevm_send_postcopy_ram_discard(ms->file, pds->ramblock_name,
+ qemu_savevm_send_postcopy_ram_discard(ms->to_dst_file,
+ pds->ramblock_name,
pds->cur_entry,
pds->start_list,
pds->length_list);
@@ -747,7 +748,8 @@ void postcopy_discard_send_finish(MigrationState *ms, PostcopyDiscardState *pds)
{
/* Anything unsent? */
if (pds->cur_entry) {
- qemu_savevm_send_postcopy_ram_discard(ms->file, pds->ramblock_name,
+ qemu_savevm_send_postcopy_ram_discard(ms->to_dst_file,
+ pds->ramblock_name,
pds->cur_entry,
pds->start_list,
pds->length_list);
diff --git a/migration/rdma.c b/migration/rdma.c
index dcabb91..3314589 100644
--- a/migration/rdma.c
+++ b/migration/rdma.c
@@ -3506,7 +3506,7 @@ void rdma_start_outgoing_migration(void *opaque,
trace_rdma_start_outgoing_migration_after_rdma_connect();
- s->file = qemu_fopen_rdma(rdma, "wb");
+ s->to_dst_file = qemu_fopen_rdma(rdma, "wb");
migrate_fd_connect(s);
return;
err:
diff --git a/migration/savevm.c b/migration/savevm.c
index 0ad1b93..f102870 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1163,7 +1163,7 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
.shared = 0
};
MigrationState *ms = migrate_init(¶ms);
- ms->file = f;
+ ms->to_dst_file = f;
if (qemu_savevm_state_blocked(errp)) {
return -EINVAL;
diff --git a/migration/tcp.c b/migration/tcp.c
index ae89172..e083d68 100644
--- a/migration/tcp.c
+++ b/migration/tcp.c
@@ -39,11 +39,11 @@ static void tcp_wait_for_connect(int fd, Error *err, void *opaque)
if (fd < 0) {
DPRINTF("migrate connect error: %s\n", error_get_pretty(err));
- s->file = NULL;
+ s->to_dst_file = NULL;
migrate_fd_error(s);
} else {
DPRINTF("migrate connect success\n");
- s->file = qemu_fopen_socket(fd, "wb");
+ s->to_dst_file = qemu_fopen_socket(fd, "wb");
migrate_fd_connect(s);
}
}
diff --git a/migration/unix.c b/migration/unix.c
index b591813..5492dd6 100644
--- a/migration/unix.c
+++ b/migration/unix.c
@@ -39,11 +39,11 @@ static void unix_wait_for_connect(int fd, Error *err, void *opaque)
if (fd < 0) {
DPRINTF("migrate connect error: %s\n", error_get_pretty(err));
- s->file = NULL;
+ s->to_dst_file = NULL;
migrate_fd_error(s);
} else {
DPRINTF("migrate connect success\n");
- s->file = qemu_fopen_socket(fd, "wb");
+ s->to_dst_file = qemu_fopen_socket(fd, "wb");
migrate_fd_connect(s);
}
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 09/39] COLO/migration: Create a new communication path from destination to source
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (7 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 08/39] migration: Rename the'file' member of MigrationState zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol zhanghailiang
` (30 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
This new communication path will be used for returning messages
from destination to source.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Remove useless error report
v12:
- Add Reviewed-by tag
v11:
- Rebase master to use qemu_file_get_return_path() for opening return path
v10:
- fix the the error log (Dave's suggestion).
---
migration/colo.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 6880aa0..65ac0c9 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -36,6 +36,12 @@ bool migration_incoming_in_colo_state(void)
static void colo_process_checkpoint(MigrationState *s)
{
+ s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
+ if (!s->rp_state.from_dst_file) {
+ error_report("Open QEMUFile from_dst_file failed");
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
@@ -43,8 +49,13 @@ static void colo_process_checkpoint(MigrationState *s)
/*TODO: COLO checkpoint savevm loop*/
+out:
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+
+ if (s->rp_state.from_dst_file) {
+ qemu_fclose(s->rp_state.from_dst_file);
+ }
}
void migrate_start_colo_process(MigrationState *s)
@@ -63,8 +74,23 @@ void *colo_process_incoming_thread(void *opaque)
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
+ mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
+ if (!mis->to_src_file) {
+ error_report("colo incoming thread: Open QEMUFile to_src_file failed");
+ goto out;
+ }
+ /* Note: We set the fd to unblocked in migration incoming coroutine,
+ * But here we are in the colo incoming thread, so it is ok to set the
+ * fd back to blocked.
+ */
+ qemu_file_set_blocking(mis->from_src_file, true);
+
/* TODO: COLO checkpoint restore loop */
+out:
+ if (mis->to_src_file) {
+ qemu_fclose(mis->to_src_file);
+ }
migration_incoming_exit_colo();
return NULL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (8 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 09/39] COLO/migration: Create a new communication path from destination to source zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-29 13:08 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 11/39] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
` (29 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
hongyang.yang
We need communications protocol of user-defined to control the checkpoint
process.
The new checkpoint request is started by Primary VM, and the interactive process
like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Refactor colo command related helper functions, use 'Error **errp' parameter
instead of return value to indicate success or failure.
- Fix some other comments from Markus.
v12:
- Rename colo_ctl_put() to colo_put_cmd()
- Rename colo_ctl_get() to colo_get_check_cmd() and drop
the third parameter
- Rename colo_ctl_get_cmd() to colo_get_cmd()
- Remove useless 'invalid' member for COLOcommand enum.
v11:
- Add missing 'checkpoint-ready' communication in comment.
- Use parameter to return 'value' for colo_ctl_get() (Dave's suggestion)
- Fix trace for colo_ctl_get() to trace command and value both
v10:
- Rename enum COLOCmd to COLOCommand (Eric's suggestion).
- Remove unused 'ram-steal'
---
migration/colo.c | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
qapi-schema.json | 25 +++++++
trace-events | 2 +
3 files changed, 226 insertions(+), 2 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 65ac0c9..c76e1fa 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -10,6 +10,7 @@
* later. See the COPYING file in the top-level directory.
*/
+#include <unistd.h>
#include "sysemu/sysemu.h"
#include "migration/colo.h"
#include "trace.h"
@@ -34,22 +35,147 @@ bool migration_incoming_in_colo_state(void)
return mis && (mis->state == MIGRATION_STATUS_COLO);
}
+static void colo_put_cmd(QEMUFile *f, COLOCommand cmd,
+ Error **errp)
+{
+ int ret;
+
+ if (cmd >= COLO_COMMAND__MAX) {
+ error_setg(errp, "%s: Invalid cmd", __func__);
+ return;
+ }
+ qemu_put_be32(f, cmd);
+ qemu_fflush(f);
+
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Can't put COLO command");
+ }
+ trace_colo_put_cmd(COLOCommand_lookup[cmd]);
+}
+
+static COLOCommand colo_get_cmd(QEMUFile *f, Error **errp)
+{
+ COLOCommand cmd;
+ int ret;
+
+ cmd = qemu_get_be32(f);
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Can't get COLO command");
+ return cmd;
+ }
+ if (cmd >= COLO_COMMAND__MAX) {
+ error_setg(errp, "%s: Invalid cmd", __func__);
+ return cmd;
+ }
+ trace_colo_get_cmd(COLOCommand_lookup[cmd]);
+ return cmd;
+}
+
+static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
+ Error **errp)
+{
+ COLOCommand cmd;
+ Error *local_err = NULL;
+
+ cmd = colo_get_cmd(f, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ if (cmd != expect_cmd) {
+ error_setg(errp, "Unexpected COLO command %d, expected %d",
+ expect_cmd, cmd);
+ }
+}
+
+static int colo_do_checkpoint_transaction(MigrationState *s)
+{
+ Error *local_err = NULL;
+
+ colo_put_cmd(s->to_dst_file, COLO_COMMAND_CHECKPOINT_REQUEST,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_get_check_cmd(s->rp_state.from_dst_file,
+ COLO_COMMAND_CHECKPOINT_REPLY, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: suspend and save vm state to colo buffer */
+
+ colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: send vmstate to Secondary */
+
+ colo_get_check_cmd(s->rp_state.from_dst_file,
+ COLO_COMMAND_VMSTATE_RECEIVED, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_get_check_cmd(s->rp_state.from_dst_file,
+ COLO_COMMAND_VMSTATE_LOADED, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: resume Primary */
+
+ return 0;
+out:
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ return -EINVAL;
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
+ Error *local_err = NULL;
+ int ret;
+
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
goto out;
}
+ /*
+ * Wait for Secondary finish loading vm states and enter COLO
+ * restore.
+ */
+ colo_get_check_cmd(s->rp_state.from_dst_file,
+ COLO_COMMAND_CHECKPOINT_READY, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
- /*TODO: COLO checkpoint savevm loop*/
+ while (s->state == MIGRATION_STATUS_COLO) {
+ /* start a colo checkpoint */
+ ret = colo_do_checkpoint_transaction(s);
+ if (ret < 0) {
+ goto out;
+ }
+ }
out:
+ /* Throw the unreported error message after exited from loop */
+ if (local_err) {
+ error_report_err(local_err);
+ }
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -67,9 +193,33 @@ void migrate_start_colo_process(MigrationState *s)
qemu_mutex_lock_iothread();
}
+static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
+ Error **errp)
+{
+ COLOCommand cmd;
+ Error *local_err = NULL;
+
+ cmd = colo_get_cmd(f, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ switch (cmd) {
+ case COLO_COMMAND_CHECKPOINT_REQUEST:
+ *checkpoint_request = 1;
+ break;
+ default:
+ *checkpoint_request = 0;
+ error_setg(errp, "Got unknown COLO command: %d", cmd);
+ break;
+ }
+}
+
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
+ Error *local_err = NULL;
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -85,9 +235,56 @@ void *colo_process_incoming_thread(void *opaque)
*/
qemu_file_set_blocking(mis->from_src_file, true);
- /* TODO: COLO checkpoint restore loop */
+ colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ while (mis->state == MIGRATION_STATUS_COLO) {
+ int request;
+
+ colo_wait_handle_cmd(mis->from_src_file, &request, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ assert(request);
+ /* FIXME: This is unnecessary for periodic checkpoint mode */
+ colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_REPLY,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ colo_get_check_cmd(mis->from_src_file,
+ COLO_COMMAND_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: read migration data into colo buffer */
+
+ colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* TODO: load vm state */
+
+ colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
+ &local_err);
+ if (local_err) {
+ goto out;
+ }
+ }
out:
+ /* Throw the unreported error message after exited from loop */
+ if (local_err) {
+ error_report_err(local_err);
+ }
+
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
diff --git a/qapi-schema.json b/qapi-schema.json
index 6eefad2..4ea4108 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -718,6 +718,31 @@
{ 'command': 'migrate-start-postcopy' }
##
+# @COLOCommand
+#
+# The commands for COLO fault tolerance
+#
+# @checkpoint-ready: SVM is ready for checkpointing
+#
+# @checkpoint-request: PVM tells SVM to prepare for new checkpointing
+#
+# @checkpoint-reply: SVM gets PVM's checkpoint request
+#
+# @vmstate-send: VM's state will be sent by PVM.
+#
+# @vmstate-size: The total size of VMstate.
+#
+# @vmstate-received: VM's state has been received by SVM.
+#
+# @vmstate-loaded: VM's state has been loaded by SVM.
+#
+# Since: 2.6
+##
+{ 'enum': 'COLOCommand',
+ 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
+ 'vmstate-send', 'vmstate-size', 'vmstate-received',
+ 'vmstate-loaded' ] }
+
# @MouseInfo:
#
# Information about a mouse device.
diff --git a/trace-events b/trace-events
index 57ddc8f..51b2305 100644
--- a/trace-events
+++ b/trace-events
@@ -1581,6 +1581,8 @@ postcopy_ram_incoming_cleanup_join(void) ""
# migration/colo.c
colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
+colo_put_cmd(const char *msg) "Send '%s' cmd"
+colo_get_cmd(const char *msg) "Receive '%s' cmd"
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 11/39] COLO: Add a new RunState RUN_STATE_COLO
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (9 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 12/39] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
` (28 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
hongyang.yang
Guest will enter this state when paused to save/restore VM state
under colo checkpoint.
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
qapi-schema.json | 5 ++++-
vl.c | 8 ++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index 4ea4108..9e594ff 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -154,12 +154,15 @@
# @watchdog: the watchdog action is configured to pause and has been triggered
#
# @guest-panicked: guest has been panicked as a result of guest OS panic
+#
+# @colo: guest is paused to save/restore VM state under colo checkpoint (since
+# 2.6)
##
{ 'enum': 'RunState',
'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
- 'guest-panicked' ] }
+ 'guest-panicked', 'colo' ] }
##
# @StatusInfo:
diff --git a/vl.c b/vl.c
index 5ac49ce..ffb5b76 100644
--- a/vl.c
+++ b/vl.c
@@ -594,6 +594,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_INMIGRATE, RUN_STATE_WATCHDOG },
{ RUN_STATE_INMIGRATE, RUN_STATE_GUEST_PANICKED },
{ RUN_STATE_INMIGRATE, RUN_STATE_FINISH_MIGRATE },
+ { RUN_STATE_INMIGRATE, RUN_STATE_COLO },
{ RUN_STATE_INTERNAL_ERROR, RUN_STATE_PAUSED },
{ RUN_STATE_INTERNAL_ERROR, RUN_STATE_FINISH_MIGRATE },
@@ -603,6 +604,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_PAUSED, RUN_STATE_RUNNING },
{ RUN_STATE_PAUSED, RUN_STATE_FINISH_MIGRATE },
+ { RUN_STATE_PAUSED, RUN_STATE_COLO},
{ RUN_STATE_POSTMIGRATE, RUN_STATE_RUNNING },
{ RUN_STATE_POSTMIGRATE, RUN_STATE_FINISH_MIGRATE },
@@ -613,9 +615,12 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_FINISH_MIGRATE, RUN_STATE_RUNNING },
{ RUN_STATE_FINISH_MIGRATE, RUN_STATE_POSTMIGRATE },
+ { RUN_STATE_FINISH_MIGRATE, RUN_STATE_COLO},
{ RUN_STATE_RESTORE_VM, RUN_STATE_RUNNING },
+ { RUN_STATE_COLO, RUN_STATE_RUNNING },
+
{ RUN_STATE_RUNNING, RUN_STATE_DEBUG },
{ RUN_STATE_RUNNING, RUN_STATE_INTERNAL_ERROR },
{ RUN_STATE_RUNNING, RUN_STATE_IO_ERROR },
@@ -626,6 +631,7 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_RUNNING, RUN_STATE_SHUTDOWN },
{ RUN_STATE_RUNNING, RUN_STATE_WATCHDOG },
{ RUN_STATE_RUNNING, RUN_STATE_GUEST_PANICKED },
+ { RUN_STATE_RUNNING, RUN_STATE_COLO},
{ RUN_STATE_SAVE_VM, RUN_STATE_RUNNING },
@@ -636,9 +642,11 @@ static const RunStateTransition runstate_transitions_def[] = {
{ RUN_STATE_RUNNING, RUN_STATE_SUSPENDED },
{ RUN_STATE_SUSPENDED, RUN_STATE_RUNNING },
{ RUN_STATE_SUSPENDED, RUN_STATE_FINISH_MIGRATE },
+ { RUN_STATE_SUSPENDED, RUN_STATE_COLO},
{ RUN_STATE_WATCHDOG, RUN_STATE_RUNNING },
{ RUN_STATE_WATCHDOG, RUN_STATE_FINISH_MIGRATE },
+ { RUN_STATE_WATCHDOG, RUN_STATE_COLO},
{ RUN_STATE_GUEST_PANICKED, RUN_STATE_RUNNING },
{ RUN_STATE_GUEST_PANICKED, RUN_STATE_FINISH_MIGRATE },
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 12/39] QEMUSizedBuffer: Introduce two help functions for qsb
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (10 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 11/39] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 13/39] COLO: Save PVM state to secondary side when do checkpoint zhanghailiang
` (27 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Introduce two new QEMUSizedBuffer APIs which will be used by COLO to buffer
VM state:
One is qsb_put_buffer(), which put the content of a given QEMUSizedBuffer
into QEMUFile, this is used to send buffered VM state to secondary.
Another is qsb_fill_buffer(), read 'size' bytes of data from the file into
qsb, this is used to get VM state from socket into a buffer.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- size_t'ify these two help functions (Dave's suggestion)
---
include/migration/qemu-file.h | 3 ++-
migration/qemu-file-buf.c | 61 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/include/migration/qemu-file.h b/include/migration/qemu-file.h
index b5d08d2..ca6a582 100644
--- a/include/migration/qemu-file.h
+++ b/include/migration/qemu-file.h
@@ -150,7 +150,8 @@ ssize_t qsb_get_buffer(const QEMUSizedBuffer *, off_t start, size_t count,
uint8_t *buf);
ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *buf,
off_t pos, size_t count);
-
+void qsb_put_buffer(QEMUFile *f, QEMUSizedBuffer *qsb, size_t size);
+size_t qsb_fill_buffer(QEMUSizedBuffer *qsb, QEMUFile *f, size_t size);
/*
* For use on files opened with qemu_bufopen
diff --git a/migration/qemu-file-buf.c b/migration/qemu-file-buf.c
index 49516b8..c50a495 100644
--- a/migration/qemu-file-buf.c
+++ b/migration/qemu-file-buf.c
@@ -366,6 +366,67 @@ ssize_t qsb_write_at(QEMUSizedBuffer *qsb, const uint8_t *source,
return count;
}
+/**
+ * Put the content of a given QEMUSizedBuffer into QEMUFile.
+ *
+ * @f: A QEMUFile
+ * @qsb: A QEMUSizedBuffer
+ * @size: size of content to write
+ */
+void qsb_put_buffer(QEMUFile *f, QEMUSizedBuffer *qsb, size_t size)
+{
+ size_t l;
+ int i;
+
+ for (i = 0; i < qsb->n_iov && size > 0; i++) {
+ l = MIN(qsb->iov[i].iov_len, size);
+ qemu_put_buffer(f, qsb->iov[i].iov_base, l);
+ size -= l;
+ }
+}
+
+/*
+ * Read 'size' bytes of data from the file into qsb.
+ * always fill from pos 0 and used after qsb_create().
+ *
+ * It will return size bytes unless there was an error, in which case it will
+ * return as many as it managed to read (assuming blocking fd's which
+ * all current QEMUFile are)
+ */
+size_t qsb_fill_buffer(QEMUSizedBuffer *qsb, QEMUFile *f, size_t size)
+{
+ ssize_t rc = qsb_grow(qsb, size);
+ ssize_t pending = size;
+ int i;
+ uint8_t *buf = NULL;
+
+ qsb->used = 0;
+
+ if (rc < 0) {
+ return rc;
+ }
+
+ for (i = 0; i < qsb->n_iov && pending > 0; i++) {
+ size_t doneone = 0;
+ /* read until iov full */
+ while (doneone < qsb->iov[i].iov_len && pending > 0) {
+ size_t readone = 0;
+
+ buf = qsb->iov[i].iov_base;
+ readone = qemu_get_buffer(f, buf,
+ MIN(qsb->iov[i].iov_len - doneone, pending));
+ if (readone == 0) {
+ return qsb->used;
+ }
+ buf += readone;
+ doneone += readone;
+ pending -= readone;
+ qsb->used += readone;
+ }
+ }
+ return qsb->used;
+}
+
typedef struct QEMUBuffer {
QEMUSizedBuffer *qsb;
QEMUFile *file;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 13/39] COLO: Save PVM state to secondary side when do checkpoint
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (11 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 12/39] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 14/39] ram: Split host_from_stream_offset() into two helper functions zhanghailiang
` (26 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
The main process of checkpoint is to synchronize SVM with PVM.
VM's state includes ram and device state. So we will migrate PVM's
state to SVM when do checkpoint, just like migration does.
We will cache PVM's state in slave, we use QEMUSizedBuffer
to store the data, we need to know the size of VM state, so in master,
we use qsb to store VM state temporarily, get the data size by call qsb_get_length()
and then migrate the data to the qsb in the secondary side.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Refactor colo_put_cmd_value() to use 'Error **errp' to indicate success
or failure.
v12:
- Replace the old colo_ctl_get() with the new helper function colo_put_cmd_value()
v11:
- Add Reviewed-by tag
---
migration/colo.c | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
migration/ram.c | 39 ++++++++++++++++++------
2 files changed, 114 insertions(+), 17 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index c76e1fa..304d27b 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -16,6 +16,9 @@
#include "trace.h"
#include "qemu/error-report.h"
+/* colo buffer */
+#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
+
bool colo_supported(void)
{
return true;
@@ -54,6 +57,27 @@ static void colo_put_cmd(QEMUFile *f, COLOCommand cmd,
trace_colo_put_cmd(COLOCommand_lookup[cmd]);
}
+static void colo_put_cmd_value(QEMUFile *f, COLOCommand cmd,
+ uint64_t value, Error **errp)
+{
+ Error *local_err = NULL;
+ int ret;
+
+ colo_put_cmd(f, cmd, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ qemu_put_be64(f, value);
+ qemu_fflush(f);
+
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Failed to send value for command:%s",
+ COLOCommand_lookup[cmd]);
+ }
+}
+
static COLOCommand colo_get_cmd(QEMUFile *f, Error **errp)
{
COLOCommand cmd;
@@ -90,9 +114,13 @@ static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
}
}
-static int colo_do_checkpoint_transaction(MigrationState *s)
+static int colo_do_checkpoint_transaction(MigrationState *s,
+ QEMUSizedBuffer *buffer)
{
+ QEMUFile *trans = NULL;
+ size_t size;
Error *local_err = NULL;
+ int ret = -1;
colo_put_cmd(s->to_dst_file, COLO_COMMAND_CHECKPOINT_REQUEST,
&local_err);
@@ -105,15 +133,48 @@ static int colo_do_checkpoint_transaction(MigrationState *s)
if (local_err) {
goto out;
}
+ /* Reset colo buffer and open it for write */
+ qsb_set_length(buffer, 0);
+ trans = qemu_bufopen("w", buffer);
+ if (!trans) {
+ error_report("Open colo buffer for write failed");
+ goto out;
+ }
- /* TODO: suspend and save vm state to colo buffer */
+ qemu_mutex_lock_iothread();
+ vm_stop_force_state(RUN_STATE_COLO);
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("run", "stop");
+
+ /* Disable block migration */
+ s->params.blk = 0;
+ s->params.shared = 0;
+ qemu_savevm_state_header(trans);
+ qemu_savevm_state_begin(trans, &s->params);
+ qemu_mutex_lock_iothread();
+ qemu_savevm_state_complete_precopy(trans, false);
+ qemu_mutex_unlock_iothread();
+
+ qemu_fflush(trans);
colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
if (local_err) {
goto out;
}
+ /* we send the total size of the vmstate first */
+ size = qsb_get_length(buffer);
+ colo_put_cmd_value(s->to_dst_file, COLO_COMMAND_VMSTATE_SIZE,
+ size, &local_err);
+ if (local_err) {
+ goto out;
+ }
- /* TODO: send vmstate to Secondary */
+ qsb_put_buffer(s->to_dst_file, buffer, size);
+ qemu_fflush(s->to_dst_file);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ goto out;
+ }
colo_get_check_cmd(s->rp_state.from_dst_file,
COLO_COMMAND_VMSTATE_RECEIVED, &local_err);
@@ -127,18 +188,26 @@ static int colo_do_checkpoint_transaction(MigrationState *s)
goto out;
}
- /* TODO: resume Primary */
+ ret = 0;
+ /* Resume primary guest */
+ qemu_mutex_lock_iothread();
+ vm_start();
+ qemu_mutex_unlock_iothread();
+ trace_colo_vm_state_change("stop", "run");
- return 0;
out:
if (local_err) {
error_report_err(local_err);
}
- return -EINVAL;
+ if (trans) {
+ qemu_fclose(trans);
+ }
+ return ret;
}
static void colo_process_checkpoint(MigrationState *s)
{
+ QEMUSizedBuffer *buffer = NULL;
Error *local_err = NULL;
int ret;
@@ -158,6 +227,12 @@ static void colo_process_checkpoint(MigrationState *s)
goto out;
}
+ buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
+ if (buffer == NULL) {
+ error_report("Failed to allocate colo buffer!");
+ goto out;
+ }
+
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
@@ -165,7 +240,7 @@ static void colo_process_checkpoint(MigrationState *s)
while (s->state == MIGRATION_STATUS_COLO) {
/* start a colo checkpoint */
- ret = colo_do_checkpoint_transaction(s);
+ ret = colo_do_checkpoint_transaction(s, buffer);
if (ret < 0) {
goto out;
}
@@ -179,6 +254,9 @@ out:
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ qsb_free(buffer);
+ buffer = NULL;
+
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
diff --git a/migration/ram.c b/migration/ram.c
index 0490f00..a709471 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -39,6 +39,7 @@
#include "trace.h"
#include "exec/ram_addr.h"
#include "qemu/rcu_queue.h"
+#include "migration/colo.h"
#ifdef DEBUG_MIGRATION_RAM
#define DPRINTF(fmt, ...) \
@@ -1866,16 +1867,8 @@ err:
return ret;
}
-
-/* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
- * long-running RCU critical section. When rcu-reclaims in the code
- * start to become numerous it will be necessary to reduce the
- * granularity of these critical sections.
- */
-
-static int ram_save_setup(QEMUFile *f, void *opaque)
+static int ram_save_init_globals(void)
{
- RAMBlock *block;
int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
dirty_rate_high_cnt = 0;
@@ -1940,6 +1933,31 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
migration_bitmap_sync();
qemu_mutex_unlock_ramlist();
qemu_mutex_unlock_iothread();
+ rcu_read_unlock();
+
+ return 0;
+}
+
+/* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
+ * long-running RCU critical section. When rcu-reclaims in the code
+ * start to become numerous it will be necessary to reduce the
+ * granularity of these critical sections.
+ */
+
+static int ram_save_setup(QEMUFile *f, void *opaque)
+{
+ RAMBlock *block;
+
+ /*
+ * migration has already setup the bitmap, reuse it.
+ */
+ if (!migration_in_colo_state()) {
+ if (ram_save_init_globals() < 0) {
+ return -1;
+ }
+ }
+
+ rcu_read_lock();
qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
@@ -2041,7 +2059,8 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
while (true) {
int pages;
- pages = ram_find_and_save_block(f, true, &bytes_transferred);
+ pages = ram_find_and_save_block(f, !migration_in_colo_state(),
+ &bytes_transferred);
/* no more blocks to sent */
if (pages == 0) {
break;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 14/39] ram: Split host_from_stream_offset() into two helper functions
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (12 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 13/39] COLO: Save PVM state to secondary side when do checkpoint zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 15/39] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily zhanghailiang
` (25 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Split host_from_stream_offset() into two parts:
One is to get ram block, which the block idstr may be get from migration
stream, the other is to get hva (host) address from block and the offset.
Besides, we will do the check working in a new helper offset_in_ramblock().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
v12:
- Remove the offset parameter for ram_block_from_stream() and
check the validity of the related value in a new helper. (Dave's suggestion)
v11:
- New patch
---
include/exec/ram_addr.h | 8 ++++++--
migration/ram.c | 40 +++++++++++++++++++++++++---------------
2 files changed, 31 insertions(+), 17 deletions(-)
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index ba4c04d..e8bc9fe 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -38,10 +38,14 @@ struct RAMBlock {
int fd;
};
+static inline bool offset_in_ramblock(RAMBlock *b, ram_addr_t offset)
+{
+ return (b && b->host && offset < b->used_length) ? true : false;
+}
+
static inline void *ramblock_ptr(RAMBlock *block, ram_addr_t offset)
{
- assert(offset < block->used_length);
- assert(block->host);
+ assert(offset_in_ramblock(block, offset));
return (char *)block->host + offset;
}
diff --git a/migration/ram.c b/migration/ram.c
index a709471..09fe6e6 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2138,28 +2138,24 @@ static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void *host)
* Returns a pointer from within the RCU-protected ram_list.
*/
/*
- * Read a RAMBlock ID from the stream f, find the host address of the
- * start of that block and add on 'offset'
+ * Read a RAMBlock ID from the stream f.
*
* f: Stream to read from
- * offset: Offset within the block
* flags: Page flags (mostly to see if it's a continuation of previous block)
*/
-static inline void *host_from_stream_offset(QEMUFile *f,
- ram_addr_t offset,
- int flags)
+static inline RAMBlock *ram_block_from_stream(QEMUFile *f,
+ int flags)
{
static RAMBlock *block = NULL;
char id[256];
uint8_t len;
if (flags & RAM_SAVE_FLAG_CONTINUE) {
- if (!block || block->max_length <= offset) {
+ if (!block) {
error_report("Ack, bad migration stream!");
return NULL;
}
-
- return block->host + offset;
+ return block;
}
len = qemu_get_byte(f);
@@ -2167,12 +2163,22 @@ static inline void *host_from_stream_offset(QEMUFile *f,
id[len] = 0;
block = qemu_ram_block_by_name(id);
- if (block && block->max_length > offset) {
- return block->host + offset;
+ if (!block) {
+ error_report("Can't find block %s", id);
+ return NULL;
}
- error_report("Can't find block %s", id);
- return NULL;
+ return block;
+}
+
+static inline void *host_from_ram_block_offset(RAMBlock *block,
+ ram_addr_t offset)
+{
+ if (!offset_in_ramblock(block, offset)) {
+ return NULL;
+ }
+
+ return block->host + offset;
}
/*
@@ -2319,7 +2325,9 @@ static int ram_load_postcopy(QEMUFile *f)
trace_ram_load_postcopy_loop((uint64_t)addr, flags);
place_needed = false;
if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE)) {
- host = host_from_stream_offset(f, addr, flags);
+ RAMBlock *block = ram_block_from_stream(f, flags);
+
+ host = host_from_ram_block_offset(block, addr);
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
@@ -2450,7 +2458,9 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE |
RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
- host = host_from_stream_offset(f, addr, flags);
+ RAMBlock *block = ram_block_from_stream(f, flags);
+
+ host = host_from_ram_block_offset(block, addr);
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 15/39] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (13 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 14/39] ram: Split host_from_stream_offset() into two helper functions zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 16/39] ram/COLO: Record the dirty pages that SVM received zhanghailiang
` (24 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We should not load PVM's state directly into SVM, because there maybe some
errors happen when SVM is receving data, which will break SVM.
We need to ensure receving all data before load the state into SVM. We use
an extra memory to cache these data (PVM's ram). The ram cache in secondary side
is initially the same as SVM/PVM's memory. And in the process of checkpoint,
we cache the dirty pages of PVM into this ram cache firstly, so this ram cache
always the same as PVM's memory at every checkpoint, then we flush this cached ram
to SVM after we receive all PVM's state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Fix minor error in error_report (Dave's comment)
- Add Reviewed-by tag
v11:
- Rename 'host_cache' to 'colo_cache' (Dave's suggestion)
v10:
- Split the process of dirty pages recording into a new patch
---
include/exec/ram_addr.h | 1 +
include/migration/migration.h | 4 +++
migration/colo.c | 11 +++++++
migration/ram.c | 73 ++++++++++++++++++++++++++++++++++++++++++-
4 files changed, 88 insertions(+), 1 deletion(-)
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index e8bc9fe..ea3289c 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -26,6 +26,7 @@ struct RAMBlock {
struct rcu_head rcu;
struct MemoryRegion *mr;
uint8_t *host;
+ uint8_t *colo_cache; /* For colo, VM's ram cache */
ram_addr_t offset;
ram_addr_t used_length;
ram_addr_t max_length;
diff --git a/include/migration/migration.h b/include/migration/migration.h
index e7a516c..6907986 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -332,4 +332,8 @@ int ram_save_queue_pages(MigrationState *ms, const char *rbname,
PostcopyState postcopy_state_get(void);
/* Set the state and return the old state */
PostcopyState postcopy_state_set(PostcopyState new_state);
+
+/* ram cache */
+int colo_init_ram_cache(void);
+void colo_release_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 304d27b..925eb3c 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -298,6 +298,7 @@ void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
Error *local_err = NULL;
+ int ret;
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -313,6 +314,12 @@ void *colo_process_incoming_thread(void *opaque)
*/
qemu_file_set_blocking(mis->from_src_file, true);
+ ret = colo_init_ram_cache();
+ if (ret < 0) {
+ error_report("Failed to initialize ram cache");
+ goto out;
+ }
+
colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -363,6 +370,10 @@ out:
error_report_err(local_err);
}
+ qemu_mutex_lock_iothread();
+ colo_release_ram_cache();
+ qemu_mutex_unlock_iothread();
+
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
diff --git a/migration/ram.c b/migration/ram.c
index 09fe6e6..db5096a 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -223,6 +223,7 @@ static RAMBlock *last_sent_block;
static ram_addr_t last_offset;
static QemuMutex migration_bitmap_mutex;
static uint64_t migration_dirty_pages;
+static bool ram_cache_enable;
static uint32_t last_version;
static bool ram_bulk_stage;
@@ -2181,6 +2182,20 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,
return block->host + offset;
}
+static inline void *colo_cache_from_block_offset(RAMBlock *block,
+ ram_addr_t offset)
+{
+ if (!offset_in_ramblock(block, offset)) {
+ return NULL;
+ }
+ if (!block->colo_cache) {
+ error_report("%s: colo_cache is NULL in block :%s",
+ __func__, block->idstr);
+ return NULL;
+ }
+ return block->colo_cache + offset;
+}
+
/*
* If a page (or a whole RDMA chunk) has been
* determined to be zero, then zap it.
@@ -2460,7 +2475,12 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
RAMBlock *block = ram_block_from_stream(f, flags);
- host = host_from_ram_block_offset(block, addr);
+ /* After going into COLO, we should load the Page into colo_cache */
+ if (ram_cache_enable) {
+ host = colo_cache_from_block_offset(block, addr);
+ } else {
+ host = host_from_ram_block_offset(block, addr);
+ }
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
@@ -2556,6 +2576,57 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
return ret;
}
+/*
+ * colo cache: this is for secondary VM, we cache the whole
+ * memory of the secondary VM, it will be called after first migration.
+ */
+int colo_init_ram_cache(void)
+{
+ RAMBlock *block;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ block->colo_cache = qemu_anon_ram_alloc(block->used_length, NULL);
+ if (!block->colo_cache) {
+ error_report("%s: Can't alloc memory for colo cache of block %s,"
+ "size 0x" RAM_ADDR_FMT, __func__, block->idstr,
+ block->used_length);
+ goto out_locked;
+ }
+ memcpy(block->colo_cache, block->host, block->used_length);
+ }
+ rcu_read_unlock();
+ ram_cache_enable = true;
+ return 0;
+
+out_locked:
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+
+ rcu_read_unlock();
+ return -errno;
+}
+
+void colo_release_ram_cache(void)
+{
+ RAMBlock *block;
+
+ ram_cache_enable = false;
+
+ rcu_read_lock();
+ QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
+ if (block->colo_cache) {
+ qemu_anon_ram_free(block->colo_cache, block->used_length);
+ block->colo_cache = NULL;
+ }
+ }
+ rcu_read_unlock();
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 16/39] ram/COLO: Record the dirty pages that SVM received
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (14 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 15/39] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it zhanghailiang
` (23 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We record the address of the dirty pages that received,
it will help flushing pages that cached into SVM.
We record them by re-using migration dirty bitmap.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- Split a new helper function from original
host_from_stream_offset() (Dave's suggestion)
- Only do recording work in this patch
v10:
- New patch split from v9's patch 13
- Rebase to master to use 'migration_bitmap_rcu'
---
migration/ram.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/migration/ram.c b/migration/ram.c
index db5096a..3d5947b 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2185,6 +2185,9 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,
static inline void *colo_cache_from_block_offset(RAMBlock *block,
ram_addr_t offset)
{
+ unsigned long *bitmap;
+ long k;
+
if (!offset_in_ramblock(block, offset)) {
return NULL;
}
@@ -2193,6 +2196,17 @@ static inline void *colo_cache_from_block_offset(RAMBlock *block,
__func__, block->idstr);
return NULL;
}
+
+ k = (block->mr->ram_addr + offset) >> TARGET_PAGE_BITS;
+ bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
+ /*
+ * During colo checkpoint, we need bitmap of these migrated pages.
+ * It help us to decide which pages in ram cache should be flushed
+ * into VM's RAM later.
+ */
+ if (!test_and_set_bit(k, bitmap)) {
+ migration_dirty_pages++;
+ }
return block->colo_cache + offset;
}
@@ -2583,6 +2597,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
int colo_init_ram_cache(void)
{
RAMBlock *block;
+ int64_t ram_cache_pages = last_ram_offset() >> TARGET_PAGE_BITS;
rcu_read_lock();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
@@ -2597,6 +2612,15 @@ int colo_init_ram_cache(void)
}
rcu_read_unlock();
ram_cache_enable = true;
+ /*
+ * Record the dirty pages that sent by PVM, we use this dirty bitmap together
+ * with to decide which page in cache should be flushed into SVM's RAM. Here
+ * we use the same name 'migration_bitmap_rcu' as for migration.
+ */
+ migration_bitmap_rcu = g_new0(struct BitmapRcu, 1);
+ migration_bitmap_rcu->bmap = bitmap_new(ram_cache_pages);
+ migration_dirty_pages = 0;
+
return 0;
out_locked:
@@ -2614,9 +2638,15 @@ out_locked:
void colo_release_ram_cache(void)
{
RAMBlock *block;
+ struct BitmapRcu *bitmap = migration_bitmap_rcu;
ram_cache_enable = false;
+ atomic_rcu_set(&migration_bitmap_rcu, NULL);
+ if (bitmap) {
+ call_rcu(bitmap, migration_bitmap_free, rcu);
+ }
+
rcu_read_lock();
QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
if (block->colo_cache) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (15 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 16/39] ram/COLO: Record the dirty pages that SVM received zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-04 19:00 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 18/39] COLO: Flush PVM's cached RAM into SVM's memory zhanghailiang
` (22 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We should not destroy the state of SVM (Secondary VM) until we receive the whole
state from the PVM (Primary VM), in case the primary fails in the middle of sending
the state, so, here we cache the device state in Secondary before restore it.
Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
return value.
v12:
- Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
---
migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 72 insertions(+), 2 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 925eb3c..8414feb 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -114,6 +114,28 @@ static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
}
}
+static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
+ Error **errp)
+{
+ Error *local_err = NULL;
+ uint64_t value;
+ int ret;
+
+ colo_get_check_cmd(f, expect_cmd, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return 0;
+ }
+
+ value = qemu_get_be64(f);
+ ret = qemu_file_get_error(f);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Failed to get value for COlO commnd: %s",
+ COLOCommand_lookup[expect_cmd]);
+ }
+ return value;
+}
+
static int colo_do_checkpoint_transaction(MigrationState *s,
QEMUSizedBuffer *buffer)
{
@@ -297,6 +319,10 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
+ QEMUFile *fb = NULL;
+ QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
+ uint64_t total_size;
+ uint64_t value;
Error *local_err = NULL;
int ret;
@@ -320,6 +346,12 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
+ if (buffer == NULL) {
+ error_report("Failed to allocate colo buffer!");
+ goto out;
+ }
+
colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -347,7 +379,21 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- /* TODO: read migration data into colo buffer */
+ /* read the VM state total size first */
+ value = colo_get_cmd_value(mis->from_src_file,
+ COLO_COMMAND_VMSTATE_SIZE, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
+ /* read vm device state into colo buffer */
+ total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
+ if (total_size != value) {
+ error_report("Got %lu VMState data, less than expected %lu",
+ total_size, value);
+ ret = -EINVAL;
+ goto out;
+ }
colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
&local_err);
@@ -355,13 +401,32 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- /* TODO: load vm state */
+ /* open colo buffer for read */
+ fb = qemu_bufopen("r", buffer);
+ if (!fb) {
+ error_report("Can't open colo buffer for read");
+ goto out;
+ }
+
+ qemu_mutex_lock_iothread();
+ qemu_system_reset(VMRESET_SILENT);
+ if (qemu_loadvm_state(fb) < 0) {
+ error_report("COLO: loadvm failed");
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+ qemu_mutex_unlock_iothread();
+
+ /* TODO: flush vm state */
colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
&local_err);
if (local_err) {
goto out;
}
+
+ qemu_fclose(fb);
+ fb = NULL;
}
out:
@@ -370,6 +435,11 @@ out:
error_report_err(local_err);
}
+ if (fb) {
+ qemu_fclose(fb);
+ }
+ qsb_free(buffer);
+
qemu_mutex_lock_iothread();
colo_release_ram_cache();
qemu_mutex_unlock_iothread();
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 18/39] COLO: Flush PVM's cached RAM into SVM's memory
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (16 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 19/39] COLO: Add checkpoint-delay parameter for migrate-set-parameters zhanghailiang
` (21 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
During the time of VM's running, PVM may dirty some pages, we will transfer
PVM's dirty pages to SVM and store them into SVM's RAM cache at next checkpoint
time. So, the content of SVM's RAM cache will always be same with PVM's memory
after checkpoint.
Instead of flushing all content of PVM's RAM cache into SVM's MEMORY,
we do this in a more efficient way:
Only flush any page that dirtied by PVM since last checkpoint.
In this way, we can ensure SVM's memory same with PVM's.
Besides, we must ensure flush RAM cache before load device state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add a trace point in the end of colo_flush_ram_cache() (Dave's suggestion)
- Add Reviewed-by tag
v11:
- Move the place of 'need_flush' (Dave's suggestion)
- Remove unused 'DPRINTF("Flush ram_cache\n")'
v10:
- trace the number of dirty pages that be received.
---
include/migration/migration.h | 1 +
migration/colo.c | 2 --
migration/ram.c | 38 ++++++++++++++++++++++++++++++++++++++
trace-events | 2 ++
4 files changed, 41 insertions(+), 2 deletions(-)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 6907986..14b9f3d 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -336,4 +336,5 @@ PostcopyState postcopy_state_set(PostcopyState new_state);
/* ram cache */
int colo_init_ram_cache(void);
void colo_release_ram_cache(void);
+void colo_flush_ram_cache(void);
#endif
diff --git a/migration/colo.c b/migration/colo.c
index 8414feb..11d2b51 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -417,8 +417,6 @@ void *colo_process_incoming_thread(void *opaque)
}
qemu_mutex_unlock_iothread();
- /* TODO: flush vm state */
-
colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
&local_err);
if (local_err) {
diff --git a/migration/ram.c b/migration/ram.c
index 3d5947b..8ff7f7c 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2458,6 +2458,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
* be atomic
*/
bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
+ bool need_flush = false;
seq_iter++;
@@ -2492,6 +2493,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
/* After going into COLO, we should load the Page into colo_cache */
if (ram_cache_enable) {
host = colo_cache_from_block_offset(block, addr);
+ need_flush = true;
} else {
host = host_from_ram_block_offset(block, addr);
}
@@ -2585,6 +2587,10 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
}
rcu_read_unlock();
+
+ if (!ret && ram_cache_enable && need_flush) {
+ colo_flush_ram_cache();
+ }
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
@@ -2657,6 +2663,38 @@ void colo_release_ram_cache(void)
rcu_read_unlock();
}
+/*
+ * Flush content of RAM cache into SVM's memory.
+ * Only flush the pages that be dirtied by PVM or SVM or both.
+ */
+void colo_flush_ram_cache(void)
+{
+ RAMBlock *block = NULL;
+ void *dst_host;
+ void *src_host;
+ ram_addr_t offset = 0;
+
+ trace_colo_flush_ram_cache_begin(migration_dirty_pages);
+ rcu_read_lock();
+ block = QLIST_FIRST_RCU(&ram_list.blocks);
+ while (block) {
+ ram_addr_t ram_addr_abs;
+ offset = migration_bitmap_find_dirty(block, offset, &ram_addr_abs);
+ migration_bitmap_clear_dirty(ram_addr_abs);
+ if (offset >= block->used_length) {
+ offset = 0;
+ block = QLIST_NEXT_RCU(block, next);
+ } else {
+ dst_host = block->host + offset;
+ src_host = block->colo_cache + offset;
+ memcpy(dst_host, src_host, TARGET_PAGE_SIZE);
+ }
+ }
+ rcu_read_unlock();
+ trace_colo_flush_ram_cache_end();
+ assert(migration_dirty_pages == 0);
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
diff --git a/trace-events b/trace-events
index 51b2305..578b775 100644
--- a/trace-events
+++ b/trace-events
@@ -1266,6 +1266,8 @@ migration_throttle(void) ""
ram_load_postcopy_loop(uint64_t addr, int flags) "@%" PRIx64 " %x"
ram_postcopy_send_discard_bitmap(void) ""
ram_save_queue_pages(const char *rbname, size_t start, size_t len) "%s: start: %zx len: %zx"
+colo_flush_ram_cache_begin(uint64_t dirty_pages) "dirty_pages %" PRIu64
+colo_flush_ram_cache_end(void) ""
# hw/display/qxl.c
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 19/39] COLO: Add checkpoint-delay parameter for migrate-set-parameters
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (17 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 18/39] COLO: Flush PVM's cached RAM into SVM's memory zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 20/39] COLO: synchronize PVM's state to SVM periodically zhanghailiang
` (20 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
Luiz Capitulino, hongyang.yang
Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Change checkpoint-delay to x-checkpoint-delay (Dave's suggestion)
- Add Reviewed-by tag
v11:
- Move this patch ahead of the patch where uses 'checkpoint_delay'
(Dave's suggestion)
v10:
- Fix related qmp command
---
hmp.c | 7 +++++++
migration/migration.c | 24 +++++++++++++++++++++++-
qapi-schema.json | 19 ++++++++++++++++---
qmp-commands.hx | 4 ++--
4 files changed, 48 insertions(+), 6 deletions(-)
diff --git a/hmp.c b/hmp.c
index c2b2c16..96ae722 100644
--- a/hmp.c
+++ b/hmp.c
@@ -284,6 +284,9 @@ void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict)
monitor_printf(mon, " %s: %" PRId64,
MigrationParameter_lookup[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT],
params->x_cpu_throttle_increment);
+ monitor_printf(mon, " %s: %" PRId64,
+ MigrationParameter_lookup[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY],
+ params->x_checkpoint_delay);
monitor_printf(mon, "\n");
}
@@ -1245,6 +1248,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
bool has_decompress_threads = false;
bool has_x_cpu_throttle_initial = false;
bool has_x_cpu_throttle_increment = false;
+ bool has_x_checkpoint_delay = false;
int i;
for (i = 0; i < MIGRATION_PARAMETER__MAX; i++) {
@@ -1264,6 +1268,8 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
break;
case MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT:
has_x_cpu_throttle_increment = true;
+ case MIGRATION_PARAMETER_X_CHECKPOINT_DELAY:
+ has_x_checkpoint_delay = true;
break;
}
qmp_migrate_set_parameters(has_compress_level, value,
@@ -1271,6 +1277,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
has_decompress_threads, value,
has_x_cpu_throttle_initial, value,
has_x_cpu_throttle_increment, value,
+ has_x_checkpoint_delay, value,
&err);
break;
}
diff --git a/migration/migration.c b/migration/migration.c
index b2c07c6..ab70f08 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -56,6 +56,11 @@
/* Migration XBZRLE default cache size */
#define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024)
+/* The delay time (in ms) between two COLO checkpoints
+ * Note: Please change this default value to 10000 when we support hybrid mode.
+ */
+#define DEFAULT_MIGRATE_X_CHECKPOINT_DELAY 200
+
static NotifierList migration_state_notifiers =
NOTIFIER_LIST_INITIALIZER(migration_state_notifiers);
@@ -91,6 +96,8 @@ MigrationState *migrate_get_current(void)
DEFAULT_MIGRATE_X_CPU_THROTTLE_INITIAL,
.parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT] =
DEFAULT_MIGRATE_X_CPU_THROTTLE_INCREMENT,
+ .parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] =
+ DEFAULT_MIGRATE_X_CHECKPOINT_DELAY,
};
if (!once) {
@@ -530,6 +537,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INITIAL];
params->x_cpu_throttle_increment =
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT];
+ params->x_checkpoint_delay =
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY];
return params;
}
@@ -736,7 +745,10 @@ void qmp_migrate_set_parameters(bool has_compress_level,
bool has_x_cpu_throttle_initial,
int64_t x_cpu_throttle_initial,
bool has_x_cpu_throttle_increment,
- int64_t x_cpu_throttle_increment, Error **errp)
+ int64_t x_cpu_throttle_increment,
+ bool has_x_checkpoint_delay,
+ int64_t x_checkpoint_delay,
+ Error **errp)
{
MigrationState *s = migrate_get_current();
@@ -771,6 +783,11 @@ void qmp_migrate_set_parameters(bool has_compress_level,
"x_cpu_throttle_increment",
"an integer in the range of 1 to 99");
}
+ if (has_x_checkpoint_delay && (x_checkpoint_delay < 0)) {
+ error_setg(errp, QERR_INVALID_PARAMETER_VALUE,
+ "x_checkpoint_delay",
+ "is invalid, it should be positive");
+ }
if (has_compress_level) {
s->parameters[MIGRATION_PARAMETER_COMPRESS_LEVEL] = compress_level;
@@ -791,6 +808,11 @@ void qmp_migrate_set_parameters(bool has_compress_level,
s->parameters[MIGRATION_PARAMETER_X_CPU_THROTTLE_INCREMENT] =
x_cpu_throttle_increment;
}
+
+ if (has_x_checkpoint_delay) {
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] =
+ x_checkpoint_delay;
+ }
}
void qmp_migrate_start_postcopy(Error **errp)
diff --git a/qapi-schema.json b/qapi-schema.json
index 9e594ff..9f59aae 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -621,11 +621,16 @@
# @x-cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
+#
+# @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in
+# periodic mode. (Since 2.6)
+#
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
'data': ['compress-level', 'compress-threads', 'decompress-threads',
- 'x-cpu-throttle-initial', 'x-cpu-throttle-increment'] }
+ 'x-cpu-throttle-initial', 'x-cpu-throttle-increment',
+ 'x-checkpoint-delay' ] }
#
# @migrate-set-parameters
@@ -645,6 +650,9 @@
# @x-cpu-throttle-increment: throttle percentage increase each time
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
+#
+# @x-checkpoint-delay: the delay time between two checkpoints. (Since 2.6)
+#
# Since: 2.4
##
{ 'command': 'migrate-set-parameters',
@@ -652,7 +660,8 @@
'*compress-threads': 'int',
'*decompress-threads': 'int',
'*x-cpu-throttle-initial': 'int',
- '*x-cpu-throttle-increment': 'int'} }
+ '*x-cpu-throttle-increment': 'int',
+ '*x-checkpoint-delay': 'int' } }
#
# @MigrationParameters
@@ -671,6 +680,8 @@
# auto-converge detects that migration is not making
# progress. The default value is 10. (Since 2.5)
#
+# @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.6)
+#
# Since: 2.4
##
{ 'struct': 'MigrationParameters',
@@ -678,7 +689,9 @@
'compress-threads': 'int',
'decompress-threads': 'int',
'x-cpu-throttle-initial': 'int',
- 'x-cpu-throttle-increment': 'int'} }
+ 'x-cpu-throttle-increment': 'int',
+ 'x-checkpoint-delay': 'int'} }
+
##
# @query-migrate-parameters
#
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 9e2a764..479a073 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -3653,7 +3653,7 @@ Set migration parameters
- "compress-level": set compression level during migration (json-int)
- "compress-threads": set compression thread count for migration (json-int)
- "decompress-threads": set decompression thread count for migration (json-int)
-
+- "x-checkpoint-delay": set the delay time for periodic checkpoint (json-int)
Arguments:
Example:
@@ -3666,7 +3666,7 @@ EQMP
{
.name = "migrate-set-parameters",
.args_type =
- "compress-level:i?,compress-threads:i?,decompress-threads:i?",
+ "compress-level:i?,compress-threads:i?,decompress-threads:i?,x-checkpoint-delay:i?",
.mhandler.cmd_new = qmp_marshal_migrate_set_parameters,
},
SQMP
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 20/39] COLO: synchronize PVM's state to SVM periodically
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (18 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 19/39] COLO: Add checkpoint-delay parameter for migrate-set-parameters zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 21/39] COLO failover: Introduce a new command to trigger a failover zhanghailiang
` (19 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Do checkpoint periodically, the default interval is 200ms.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- Fix wrong sleep time for checkpoint period. (Dave's review comment)
---
migration/colo.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 11d2b51..a00bc10 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -11,6 +11,7 @@
*/
#include <unistd.h>
+#include "qemu/timer.h"
#include "sysemu/sysemu.h"
#include "migration/colo.h"
#include "trace.h"
@@ -230,6 +231,7 @@ out:
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
+ int64_t current_time, checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
Error *local_err = NULL;
int ret;
@@ -261,11 +263,21 @@ static void colo_process_checkpoint(MigrationState *s)
trace_colo_vm_state_change("stop", "run");
while (s->state == MIGRATION_STATUS_COLO) {
+ current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
+ if (current_time - checkpoint_time <
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
+ int64_t delay_ms;
+
+ delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
+ (current_time - checkpoint_time);
+ g_usleep(delay_ms * 1000);
+ }
/* start a colo checkpoint */
ret = colo_do_checkpoint_transaction(s, buffer);
if (ret < 0) {
goto out;
}
+ checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
}
out:
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 21/39] COLO failover: Introduce a new command to trigger a failover
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (19 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 20/39] COLO: synchronize PVM's state to SVM periodically zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 22/39] COLO failover: Introduce state to record failover process zhanghailiang
` (18 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
Luiz Capitulino, hongyang.yang
We leave users to choose whatever heartbeat solution they want, if the heartbeat
is lost, or other errors they detect, they can use experimental command
'x_colo_lost_heartbeat' to tell COLO to do failover, COLO will do operations
accordingly.
For example, if the command is sent to the PVM, the Primary side will
exit COLO mode and take over operation. If sent to the Secondary, the
secondary will run failover work, then take over server operation to
become the new Primary.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
v11:
- Add more comments for x-colo-lost-heartbeat command (Eric's suggestion)
- Return 'enum' instead of 'int' for get_colo_mode() (Eric's suggestion)
v10:
- Rename command colo_lost_hearbeat to experimental 'x_colo_lost_heartbeat'
---
hmp-commands.hx | 15 +++++++++++++++
hmp.c | 8 ++++++++
hmp.h | 1 +
include/migration/colo.h | 3 +++
include/migration/failover.h | 20 ++++++++++++++++++++
migration/Makefile.objs | 2 +-
migration/colo-comm.c | 11 +++++++++++
migration/colo-failover.c | 41 +++++++++++++++++++++++++++++++++++++++++
migration/colo.c | 1 +
qapi-schema.json | 29 +++++++++++++++++++++++++++++
qmp-commands.hx | 19 +++++++++++++++++++
stubs/migration-colo.c | 8 ++++++++
12 files changed, 157 insertions(+), 1 deletion(-)
create mode 100644 include/migration/failover.h
create mode 100644 migration/colo-failover.c
diff --git a/hmp-commands.hx b/hmp-commands.hx
index bb52e4d..a381b0b 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1039,6 +1039,21 @@ migration (or once already in postcopy).
ETEXI
{
+ .name = "x_colo_lost_heartbeat",
+ .args_type = "",
+ .params = "",
+ .help = "Tell COLO that heartbeat is lost,\n\t\t\t"
+ "a failover or takeover is needed.",
+ .mhandler.cmd = hmp_x_colo_lost_heartbeat,
+ },
+
+STEXI
+@item x_colo_lost_heartbeat
+@findex x_colo_lost_heartbeat
+Tell COLO that heartbeat is lost, a failover or takeover is needed.
+ETEXI
+
+ {
.name = "client_migrate_info",
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
diff --git a/hmp.c b/hmp.c
index 96ae722..79bf2f5 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1318,6 +1318,14 @@ void hmp_migrate_start_postcopy(Monitor *mon, const QDict *qdict)
hmp_handle_error(mon, &err);
}
+void hmp_x_colo_lost_heartbeat(Monitor *mon, const QDict *qdict)
+{
+ Error *err = NULL;
+
+ qmp_x_colo_lost_heartbeat(&err);
+ hmp_handle_error(mon, &err);
+}
+
void hmp_set_password(Monitor *mon, const QDict *qdict)
{
const char *protocol = qdict_get_str(qdict, "protocol");
diff --git a/hmp.h b/hmp.h
index a8c5b5a..864a300 100644
--- a/hmp.h
+++ b/hmp.h
@@ -70,6 +70,7 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict);
void hmp_migrate_set_cache_size(Monitor *mon, const QDict *qdict);
void hmp_client_migrate_info(Monitor *mon, const QDict *qdict);
void hmp_migrate_start_postcopy(Monitor *mon, const QDict *qdict);
+void hmp_x_colo_lost_heartbeat(Monitor *mon, const QDict *qdict);
void hmp_set_password(Monitor *mon, const QDict *qdict);
void hmp_expire_password(Monitor *mon, const QDict *qdict);
void hmp_eject(Monitor *mon, const QDict *qdict);
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 2676c4a..ba27719 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -17,6 +17,7 @@
#include "migration/migration.h"
#include "qemu/coroutine_int.h"
#include "qemu/thread.h"
+#include "qemu/main-loop.h"
bool colo_supported(void);
void colo_info_mig_init(void);
@@ -29,4 +30,6 @@ bool migration_incoming_enable_colo(void);
void migration_incoming_exit_colo(void);
void *colo_process_incoming_thread(void *opaque);
bool migration_incoming_in_colo_state(void);
+
+COLOMode get_colo_mode(void);
#endif
diff --git a/include/migration/failover.h b/include/migration/failover.h
new file mode 100644
index 0000000..1785b52
--- /dev/null
+++ b/include/migration/failover.h
@@ -0,0 +1,20 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO.,LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#ifndef QEMU_FAILOVER_H
+#define QEMU_FAILOVER_H
+
+#include "qemu-common.h"
+
+void failover_request_active(Error **errp);
+
+#endif
diff --git a/migration/Makefile.objs b/migration/Makefile.objs
index 81b5713..920d1e7 100644
--- a/migration/Makefile.objs
+++ b/migration/Makefile.objs
@@ -1,6 +1,6 @@
common-obj-y += migration.o tcp.o
-common-obj-$(CONFIG_COLO) += colo.o
common-obj-y += colo-comm.o
+common-obj-$(CONFIG_COLO) += colo.o colo-failover.o
common-obj-y += vmstate.o
common-obj-y += qemu-file.o qemu-file-buf.o qemu-file-unix.o qemu-file-stdio.o
common-obj-y += xbzrle.o postcopy-ram.o
diff --git a/migration/colo-comm.c b/migration/colo-comm.c
index 30df3d3..58a6488 100644
--- a/migration/colo-comm.c
+++ b/migration/colo-comm.c
@@ -20,6 +20,17 @@ typedef struct {
static COLOInfo colo_info;
+COLOMode get_colo_mode(void)
+{
+ if (migration_in_colo_state()) {
+ return COLO_MODE_PRIMARY;
+ } else if (migration_incoming_in_colo_state()) {
+ return COLO_MODE_SECONDARY;
+ } else {
+ return COLO_MODE_UNKNOWN;
+ }
+}
+
static void colo_info_pre_save(void *opaque)
{
COLOInfo *s = opaque;
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
new file mode 100644
index 0000000..e3897c6
--- /dev/null
+++ b/migration/colo-failover.c
@@ -0,0 +1,41 @@
+/*
+ * COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
+ * (a.k.a. Fault Tolerance or Continuous Replication)
+ *
+ * Copyright (c) 2015 HUAWEI TECHNOLOGIES CO., LTD.
+ * Copyright (c) 2015 FUJITSU LIMITED
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "migration/colo.h"
+#include "migration/failover.h"
+#include "qmp-commands.h"
+#include "qapi/qmp/qerror.h"
+
+static QEMUBH *failover_bh;
+
+static void colo_failover_bh(void *opaque)
+{
+ qemu_bh_delete(failover_bh);
+ failover_bh = NULL;
+ /*TODO: Do failover work */
+}
+
+void failover_request_active(Error **errp)
+{
+ failover_bh = qemu_bh_new(colo_failover_bh, NULL);
+ qemu_bh_schedule(failover_bh);
+}
+
+void qmp_x_colo_lost_heartbeat(Error **errp)
+{
+ if (get_colo_mode() == COLO_MODE_UNKNOWN) {
+ error_setg(errp, QERR_FEATURE_DISABLED, "colo");
+ return;
+ }
+
+ failover_request_active(errp);
+}
diff --git a/migration/colo.c b/migration/colo.c
index a00bc10..fa85695 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -16,6 +16,7 @@
#include "migration/colo.h"
#include "trace.h"
#include "qemu/error-report.h"
+#include "migration/failover.h"
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
diff --git a/qapi-schema.json b/qapi-schema.json
index 9f59aae..7326102 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -759,6 +759,35 @@
'vmstate-send', 'vmstate-size', 'vmstate-received',
'vmstate-loaded' ] }
+##
+# @COLOMode
+#
+# The colo mode
+#
+# @unknown: unknown mode
+#
+# @primary: master side
+#
+# @secondary: slave side
+#
+# Since: 2.6
+##
+{ 'enum': 'COLOMode',
+ 'data': [ 'unknown', 'primary', 'secondary'] }
+
+##
+# @x-colo-lost-heartbeat
+#
+# Tell qemu that heartbeat is lost, request it to do takeover procedures.
+# If this command is sent to the PVM, the Primary side will exit COLO mode.
+# If sent to the Secondary, the Secondary side will run failover work,
+# then takes over server operation to become the service VM.
+#
+# Since: 2.6
+##
+{ 'command': 'x-colo-lost-heartbeat' }
+
+##
# @MouseInfo:
#
# Information about a mouse device.
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 479a073..0b37225 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -803,6 +803,25 @@ Example:
EQMP
{
+ .name = "x-colo-lost-heartbeat",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_x_colo_lost_heartbeat,
+ },
+
+SQMP
+x-colo-lost-heartbeat
+--------------------
+
+Tell COLO that heartbeat is lost, a failover or takeover is needed.
+
+Example:
+
+-> { "execute": "x-colo-lost-heartbeat" }
+<- { "return": {} }
+
+EQMP
+
+ {
.name = "client_migrate_info",
.args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
.params = "protocol hostname port tls-port cert-subject",
diff --git a/stubs/migration-colo.c b/stubs/migration-colo.c
index c12516e..5028f63 100644
--- a/stubs/migration-colo.c
+++ b/stubs/migration-colo.c
@@ -11,6 +11,7 @@
*/
#include "migration/colo.h"
+#include "qmp-commands.h"
bool colo_supported(void)
{
@@ -35,3 +36,10 @@ void *colo_process_incoming_thread(void *opaque)
{
return NULL;
}
+
+void qmp_x_colo_lost_heartbeat(Error **errp)
+{
+ error_setg(errp, "COLO is not supported, please rerun configure"
+ " with --enable-colo option in order to support"
+ " COLO feature");
+}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 22/39] COLO failover: Introduce state to record failover process
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (20 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 21/39] COLO failover: Introduce a new command to trigger a failover zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 23/39] COLO: Implement failover work for Primary VM zhanghailiang
` (17 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
When handling failover, we do different things according to the different stage
of failover process, here we introduce a global atomic variable to record the
status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v11:
- fix several typos found by Dave
- Add Reviewed-by tag
---
include/migration/failover.h | 10 ++++++++++
migration/colo-failover.c | 37 +++++++++++++++++++++++++++++++++++++
migration/colo.c | 4 ++++
trace-events | 1 +
4 files changed, 52 insertions(+)
diff --git a/include/migration/failover.h b/include/migration/failover.h
index 1785b52..882c625 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -15,6 +15,16 @@
#include "qemu-common.h"
+typedef enum COLOFailoverStatus {
+ FAILOVER_STATUS_NONE = 0,
+ FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
+ FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
+ FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
+} COLOFailoverStatus;
+
+void failover_init_state(void);
+int failover_set_state(int old_state, int new_state);
+int failover_get_state(void);
void failover_request_active(Error **errp);
#endif
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
index e3897c6..1b1be24 100644
--- a/migration/colo-failover.c
+++ b/migration/colo-failover.c
@@ -14,22 +14,59 @@
#include "migration/failover.h"
#include "qmp-commands.h"
#include "qapi/qmp/qerror.h"
+#include "qemu/error-report.h"
+#include "trace.h"
static QEMUBH *failover_bh;
+static COLOFailoverStatus failover_state;
static void colo_failover_bh(void *opaque)
{
+ int old_state;
+
qemu_bh_delete(failover_bh);
failover_bh = NULL;
+ old_state = failover_set_state(FAILOVER_STATUS_REQUEST,
+ FAILOVER_STATUS_HANDLING);
+ if (old_state != FAILOVER_STATUS_REQUEST) {
+ error_report("Unkown error for failover, old_state=%d", old_state);
+ return;
+ }
/*TODO: Do failover work */
}
void failover_request_active(Error **errp)
{
+ if (failover_set_state(FAILOVER_STATUS_NONE, FAILOVER_STATUS_REQUEST)
+ != FAILOVER_STATUS_NONE) {
+ error_setg(errp, "COLO failover is already actived");
+ return;
+ }
failover_bh = qemu_bh_new(colo_failover_bh, NULL);
qemu_bh_schedule(failover_bh);
}
+void failover_init_state(void)
+{
+ failover_state = FAILOVER_STATUS_NONE;
+}
+
+int failover_set_state(int old_state, int new_state)
+{
+ int old;
+
+ old = atomic_cmpxchg(&failover_state, old_state, new_state);
+ if (old == old_state) {
+ trace_colo_failover_set_state(new_state);
+ }
+ return old;
+}
+
+int failover_get_state(void)
+{
+ return atomic_read(&failover_state);
+}
+
void qmp_x_colo_lost_heartbeat(Error **errp)
{
if (get_colo_mode() == COLO_MODE_UNKNOWN) {
diff --git a/migration/colo.c b/migration/colo.c
index fa85695..92fefc0 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -236,6 +236,8 @@ static void colo_process_checkpoint(MigrationState *s)
Error *local_err = NULL;
int ret;
+ failover_init_state();
+
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
@@ -342,6 +344,8 @@ void *colo_process_incoming_thread(void *opaque)
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
+ failover_init_state();
+
mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
if (!mis->to_src_file) {
error_report("colo incoming thread: Open QEMUFile to_src_file failed");
diff --git a/trace-events b/trace-events
index 578b775..a50bf45 100644
--- a/trace-events
+++ b/trace-events
@@ -1585,6 +1585,7 @@ postcopy_ram_incoming_cleanup_join(void) ""
colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
colo_put_cmd(const char *msg) "Send '%s' cmd"
colo_get_cmd(const char *msg) "Receive '%s' cmd"
+colo_failover_set_state(int new_state) "new state %d"
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 23/39] COLO: Implement failover work for Primary VM
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (21 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 22/39] COLO failover: Introduce state to record failover process zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 24/39] COLO: Implement failover work for Secondary VM zhanghailiang
` (16 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
For PVM, if there is failover request from users.
The colo thread will exit the loop while the failover BH does the
cleanup work and resumes VM.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
v12:
- Fix error report and remove unnecessary check in primary_vm_do_failover()
(Dave's suggestion)
v11:
- Don't call migration_end() in primary_vm_do_failover(),
The cleanup work will be done in migration_thread().
- Remove vm_start() in primary_vm_do_failover() which also been done
in migraiton_thread()
v10:
- Call migration_end() in primary_vm_do_failover()
---
include/migration/colo.h | 3 +++
include/migration/failover.h | 1 +
migration/colo-failover.c | 7 +++++-
migration/colo.c | 53 +++++++++++++++++++++++++++++++++++++++++---
4 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index ba27719..0b02e95 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -32,4 +32,7 @@ void *colo_process_incoming_thread(void *opaque);
bool migration_incoming_in_colo_state(void);
COLOMode get_colo_mode(void);
+
+/* failover */
+void colo_do_failover(MigrationState *s);
#endif
diff --git a/include/migration/failover.h b/include/migration/failover.h
index 882c625..fba3931 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -26,5 +26,6 @@ void failover_init_state(void);
int failover_set_state(int old_state, int new_state);
int failover_get_state(void);
void failover_request_active(Error **errp);
+bool failover_request_is_active(void);
#endif
diff --git a/migration/colo-failover.c b/migration/colo-failover.c
index 1b1be24..f7422c5 100644
--- a/migration/colo-failover.c
+++ b/migration/colo-failover.c
@@ -32,7 +32,7 @@ static void colo_failover_bh(void *opaque)
error_report("Unkown error for failover, old_state=%d", old_state);
return;
}
- /*TODO: Do failover work */
+ colo_do_failover(NULL);
}
void failover_request_active(Error **errp)
@@ -67,6 +67,11 @@ int failover_get_state(void)
return atomic_read(&failover_state);
}
+bool failover_request_is_active(void)
+{
+ return failover_get_state() != FAILOVER_STATUS_NONE;
+}
+
void qmp_x_colo_lost_heartbeat(Error **errp)
{
if (get_colo_mode() == COLO_MODE_UNKNOWN) {
diff --git a/migration/colo.c b/migration/colo.c
index 92fefc0..29b0489 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -40,6 +40,40 @@ bool migration_incoming_in_colo_state(void)
return mis && (mis->state == MIGRATION_STATUS_COLO);
}
+static bool colo_runstate_is_stopped(void)
+{
+ return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
+}
+
+static void primary_vm_do_failover(void)
+{
+ MigrationState *s = migrate_get_current();
+ int old_state;
+
+ migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_COMPLETED);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Incorrect state (%d) while doing failover for Primary VM",
+ old_state);
+ return;
+ }
+}
+
+void colo_do_failover(MigrationState *s)
+{
+ /* Make sure vm stopped while failover */
+ if (!colo_runstate_is_stopped()) {
+ vm_stop_force_state(RUN_STATE_COLO);
+ }
+
+ if (get_colo_mode() == COLO_MODE_PRIMARY) {
+ primary_vm_do_failover();
+ }
+}
+
static void colo_put_cmd(QEMUFile *f, COLOCommand cmd,
Error **errp)
{
@@ -166,9 +200,20 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
}
qemu_mutex_lock_iothread();
+ if (failover_request_is_active()) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
vm_stop_force_state(RUN_STATE_COLO);
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("run", "stop");
+ /*
+ * failover request bh could be called after
+ * vm_stop_force_state so we check failover_request_is_active() again.
+ */
+ if (failover_request_is_active()) {
+ goto out;
+ }
/* Disable block migration */
s->params.blk = 0;
@@ -266,6 +311,11 @@ static void colo_process_checkpoint(MigrationState *s)
trace_colo_vm_state_change("stop", "run");
while (s->state == MIGRATION_STATUS_COLO) {
+ if (failover_request_is_active()) {
+ error_report("failover request");
+ goto out;
+ }
+
current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
if (current_time - checkpoint_time <
s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
@@ -288,9 +338,6 @@ out:
if (local_err) {
error_report_err(local_err);
}
- migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
- MIGRATION_STATUS_COMPLETED);
-
qsb_free(buffer);
buffer = NULL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 24/39] COLO: Implement failover work for Secondary VM
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (22 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 23/39] COLO: Implement failover work for Primary VM zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 25/39] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
` (15 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
If users require SVM to takeover work, colo incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v12:
- Improve error message that suggested by Dave
- Add Reviewed-by tag
---
migration/colo.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 29b0489..752a667 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -45,6 +45,33 @@ static bool colo_runstate_is_stopped(void)
return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
}
+static void secondary_vm_do_failover(void)
+{
+ int old_state;
+ MigrationIncomingState *mis = migration_incoming_get_current();
+
+ migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
+ MIGRATION_STATUS_COMPLETED);
+
+ if (!autostart) {
+ error_report("\"-S\" qemu option will be ignored in secondary side");
+ /* recover runstate to normal migration finish state */
+ autostart = true;
+ }
+
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_COMPLETED);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Incorrect state (%d) while doing failover for "
+ "secondary VM", old_state);
+ return;
+ }
+ /* For Secondary VM, jump to incoming co */
+ if (mis->migration_incoming_co) {
+ qemu_coroutine_enter(mis->migration_incoming_co, NULL);
+ }
+}
+
static void primary_vm_do_failover(void)
{
MigrationState *s = migrate_get_current();
@@ -71,6 +98,8 @@ void colo_do_failover(MigrationState *s)
if (get_colo_mode() == COLO_MODE_PRIMARY) {
primary_vm_do_failover();
+ } else {
+ secondary_vm_do_failover();
}
}
@@ -430,6 +459,11 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
assert(request);
+ if (failover_request_is_active()) {
+ error_report("failover request");
+ goto out;
+ }
+
/* FIXME: This is unnecessary for periodic checkpoint mode */
colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_REPLY,
&local_err);
@@ -501,10 +535,11 @@ out:
qemu_fclose(fb);
}
qsb_free(buffer);
-
- qemu_mutex_lock_iothread();
+ /* Here, we can ensure BH is hold the global lock, and will join colo
+ * incoming thread, so here it is not necessary to lock here again,
+ * or there will be a deadlock error.
+ */
colo_release_ram_cache();
- qemu_mutex_unlock_iothread();
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 25/39] qmp event: Add COLO_EXIT event to notify users while exited from COLO
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (23 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 24/39] COLO: Implement failover work for Secondary VM zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 26/39] COLO failover: Shutdown related socket fd when do failover zhanghailiang
` (14 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
zhanghailiang, arei.gonglei, stefanha, amit.shah, zhangchen.fnst,
Michael Roth, hongyang.yang
If some errors happen during VM's COLO FT stage, it's important to notify the users
of this event. Together with 'x_colo_lost_heartbeat', users can intervene in COLO's
failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
v13:
- Remove optional 'error' string for this event.
(I doubted it was usefull for users, Since users shouldn't interpret it and
can't depend on it to decide what happened exaclty.
Besides it is really hard to organize.)
- Remove unused 'unknown' member for enum COLOExitReason.
(Eric's suggestion)
- Fix comment for COLO_EXIT
v11:
- Fix several typos found by Eric
---
docs/qmp-events.txt | 16 ++++++++++++++++
migration/colo.c | 20 ++++++++++++++++++++
qapi-schema.json | 14 ++++++++++++++
qapi/event.json | 15 +++++++++++++++
4 files changed, 65 insertions(+)
diff --git a/docs/qmp-events.txt b/docs/qmp-events.txt
index d2f1ce4..fef577e 100644
--- a/docs/qmp-events.txt
+++ b/docs/qmp-events.txt
@@ -184,6 +184,22 @@ Example:
Note: The "ready to complete" status is always reset by a BLOCK_JOB_ERROR
event.
+COLO_EXIT
+---------
+
+Emitted when VM finishes COLO mode due to some errors happening or
+at the request of users.
+
+Data:
+
+ - "mode": COLO mode, primary or secondary side (json-string)
+ - "reason": the exit reason, internal error or external request. (json-string)
+
+Example:
+
+{"timestamp": {"seconds": 2032141960, "microseconds": 417172},
+ "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
+
DEVICE_DELETED
--------------
diff --git a/migration/colo.c b/migration/colo.c
index 752a667..6c17cc4 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -17,6 +17,7 @@
#include "trace.h"
#include "qemu/error-report.h"
#include "migration/failover.h"
+#include "qapi-event.h"
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
@@ -367,6 +368,18 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ /*
+ * There are only two reasons we can go here, something error happened,
+ * Or users triggered failover.
+ */
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
+
qsb_free(buffer);
buffer = NULL;
@@ -530,6 +543,13 @@ out:
if (local_err) {
error_report_err(local_err);
}
+ if (!failover_request_is_active()) {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_ERROR, NULL);
+ } else {
+ qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+ COLO_EXIT_REASON_REQUEST, NULL);
+ }
if (fb) {
qemu_fclose(fb);
diff --git a/qapi-schema.json b/qapi-schema.json
index 7326102..94f23a6 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -776,6 +776,20 @@
'data': [ 'unknown', 'primary', 'secondary'] }
##
+# @COLOExitReason
+#
+# The reason for a COLO exit
+#
+# @request: COLO exit is due to an external request
+#
+# @error: COLO exit is due to an internal error
+#
+# Since: 2.6
+##
+{ 'enum': 'COLOExitReason',
+ 'data': [ 'request', 'error' ] }
+
+##
# @x-colo-lost-heartbeat
#
# Tell qemu that heartbeat is lost, request it to do takeover procedures.
diff --git a/qapi/event.json b/qapi/event.json
index f0cef01..1958137 100644
--- a/qapi/event.json
+++ b/qapi/event.json
@@ -255,6 +255,21 @@
'data': {'status': 'MigrationStatus'}}
##
+# @COLO_EXIT
+#
+# Emitted when VM finishes COLO mode due to some errors happening or
+# at the request of users.
+#
+# @mode: which COLO mode the VM was in when it exited.
+#
+# @reason: describes the reason for the COLO exit.
+#
+# Since: 2.6
+##
+{ 'event': 'COLO_EXIT',
+ 'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
+
+##
# @ACPI_DEVICE_OST
#
# Emitted when guest executes ACPI _OST method.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 26/39] COLO failover: Shutdown related socket fd when do failover
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (24 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 25/39] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 27/39] COLO failover: Don't do failover during loading VM's state zhanghailiang
` (13 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
If the net connection between COLO's two sides is broken while colo/colo incoming
thread is blocked in 'read'/'write' socket fd. It will not detect this error until
connect timeout. It will be a long time.
Here we shutdown all the related socket file descriptors to wake up the blocking
operation in failover BH. Besides, we should close the corresponding file descriptors
after failvoer BH shutdown them, or there will be an error.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
- Use semaphore to notify colo/colo incoming loop that failover work is finished.
v12:
- Shutdown both QEMUFile's fd though they may use the same fd. (Dave's suggestion)
v11:
- Only shutdown fd for once
---
include/migration/migration.h | 3 +++
migration/colo.c | 43 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 14b9f3d..b34def6 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -112,6 +112,7 @@ struct MigrationIncomingState {
QemuThread colo_incoming_thread;
/* The coroutine we should enter (back) after failover */
Coroutine *migration_incoming_co;
+ QemuSemaphore colo_incoming_sem;
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
@@ -175,6 +176,8 @@ struct MigrationState
QSIMPLEQ_HEAD(src_page_requests, MigrationSrcPageRequest) src_page_requests;
/* The RAMBlock used in the last src_page_request */
RAMBlock *last_req_rb;
+
+ QemuSemaphore colo_sem;
};
void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/colo.c b/migration/colo.c
index 6c17cc4..03920d3 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -59,6 +59,18 @@ static void secondary_vm_do_failover(void)
/* recover runstate to normal migration finish state */
autostart = true;
}
+ /*
+ * Make sure colo incoming thread not block in recv or send,
+ * If mis->from_src_file and mis->to_src_file use the same fd,
+ * The second shutdown() will return -1, we ignore this value,
+ * it is harmless.
+ */
+ if (mis->from_src_file) {
+ qemu_file_shutdown(mis->from_src_file);
+ }
+ if (mis->to_src_file) {
+ qemu_file_shutdown(mis->to_src_file);
+ }
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
@@ -67,6 +79,8 @@ static void secondary_vm_do_failover(void)
"secondary VM", old_state);
return;
}
+ /* Notify COLO incoming thread that failover work is finished */
+ qemu_sem_post(&mis->colo_incoming_sem);
/* For Secondary VM, jump to incoming co */
if (mis->migration_incoming_co) {
qemu_coroutine_enter(mis->migration_incoming_co, NULL);
@@ -81,6 +95,18 @@ static void primary_vm_do_failover(void)
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ /*
+ * Make sure colo thread no block in recv or send,
+ * The s->rp_state.from_dst_file and s->to_dst_file may use the
+ * same fd, but we still shutdown the fd for twice, it is harmless.
+ */
+ if (s->to_dst_file) {
+ qemu_file_shutdown(s->to_dst_file);
+ }
+ if (s->rp_state.from_dst_file) {
+ qemu_file_shutdown(s->rp_state.from_dst_file);
+ }
+
old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
FAILOVER_STATUS_COMPLETED);
if (old_state != FAILOVER_STATUS_HANDLING) {
@@ -88,6 +114,8 @@ static void primary_vm_do_failover(void)
old_state);
return;
}
+ /* Notify COLO thread that failover work is finished */
+ qemu_sem_post(&s->colo_sem);
}
void colo_do_failover(MigrationState *s)
@@ -383,6 +411,14 @@ out:
qsb_free(buffer);
buffer = NULL;
+ /* Hope this not to be too long to wait here */
+ qemu_sem_wait(&s->colo_sem);
+ qemu_sem_destroy(&s->colo_sem);
+ /*
+ * Must be called after failover BH is completed,
+ * Or the failover BH may shutdown the wrong fd, that
+ * re-used by other thread after we release here.
+ */
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
@@ -391,6 +427,7 @@ out:
void migrate_start_colo_process(MigrationState *s)
{
qemu_mutex_unlock_iothread();
+ qemu_sem_init(&s->colo_sem, 0);
migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
colo_process_checkpoint(s);
@@ -430,6 +467,8 @@ void *colo_process_incoming_thread(void *opaque)
Error *local_err = NULL;
int ret;
+ qemu_sem_init(&mis->colo_incoming_sem, 0);
+
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
@@ -561,6 +600,10 @@ out:
*/
colo_release_ram_cache();
+ /* Hope this not to be too long to loop here */
+ qemu_sem_wait(&mis->colo_incoming_sem);
+ qemu_sem_destroy(&mis->colo_incoming_sem);
+ /* Must be called after failover BH is completed */
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 27/39] COLO failover: Don't do failover during loading VM's state
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (25 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 26/39] COLO failover: Shutdown related socket fd when do failover zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state zhanghailiang
` (12 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We should not do failover work while the main thread is loading
VM's state, otherwise it will destroy the consistent of VM's memory and
device state.
Here we add a new failover status 'RELAUNCH' which means we should
relaunch the process of failover.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
---
include/migration/failover.h | 2 ++
migration/colo.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/include/migration/failover.h b/include/migration/failover.h
index fba3931..e115d25 100644
--- a/include/migration/failover.h
+++ b/include/migration/failover.h
@@ -20,6 +20,8 @@ typedef enum COLOFailoverStatus {
FAILOVER_STATUS_REQUEST = 1, /* Request but not handled */
FAILOVER_STATUS_HANDLING = 2, /* In the process of handling failover */
FAILOVER_STATUS_COMPLETED = 3, /* Finish the failover process */
+ /* Optional, Relaunch the failover process, again 'NONE' -> 'COMPLETED' */
+ FAILOVER_STATUS_RELAUNCH = 4,
} COLOFailoverStatus;
void failover_init_state(void);
diff --git a/migration/colo.c b/migration/colo.c
index 03920d3..de01ade 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -19,6 +19,8 @@
#include "migration/failover.h"
#include "qapi-event.h"
+static bool vmstate_loading;
+
/* colo buffer */
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
@@ -51,6 +53,19 @@ static void secondary_vm_do_failover(void)
int old_state;
MigrationIncomingState *mis = migration_incoming_get_current();
+ /* Can not do failover during the process of VM's loading VMstate, Or
+ * it will break the secondary VM.
+ */
+ if (vmstate_loading) {
+ old_state = failover_set_state(FAILOVER_STATUS_HANDLING,
+ FAILOVER_STATUS_RELAUNCH);
+ if (old_state != FAILOVER_STATUS_HANDLING) {
+ error_report("Unknown error while do failover for secondary VM,"
+ "old_state: %d", old_state);
+ }
+ return;
+ }
+
migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -560,13 +575,23 @@ void *colo_process_incoming_thread(void *opaque)
qemu_mutex_lock_iothread();
qemu_system_reset(VMRESET_SILENT);
+ vmstate_loading = true;
if (qemu_loadvm_state(fb) < 0) {
error_report("COLO: loadvm failed");
+ vmstate_loading = false;
qemu_mutex_unlock_iothread();
goto out;
}
+
+ vmstate_loading = false;
qemu_mutex_unlock_iothread();
+ if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
+ failover_set_state(FAILOVER_STATUS_RELAUNCH, FAILOVER_STATUS_NONE);
+ failover_request_active(NULL);
+ goto out;
+ }
+
colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
&local_err);
if (local_err) {
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (26 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 27/39] COLO failover: Don't do failover during loading VM's state zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-26 19:55 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 29/39] COLO: Update the global runstate after going into colo state zhanghailiang
` (11 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
Paolo Bonzini, amit.shah, zhangchen.fnst, hongyang.yang
If VM is in COLO FT state, we should do some extra work before normal shutdown
process. SVM will ignore the shutdown command if this command is issued directly
to it, PVM will send the shutdown command to SVM if it gets this command.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
v13:
- Move COLO shutdown related codes to colo.c file (Dave's suggestion)
---
include/migration/colo.h | 2 ++
include/sysemu/sysemu.h | 3 +++
migration/colo.c | 44 ++++++++++++++++++++++++++++++++++++++++++--
qapi-schema.json | 4 +++-
vl.c | 19 ++++++++++++++++---
5 files changed, 66 insertions(+), 6 deletions(-)
diff --git a/include/migration/colo.h b/include/migration/colo.h
index 0b02e95..1ddcf93 100644
--- a/include/migration/colo.h
+++ b/include/migration/colo.h
@@ -35,4 +35,6 @@ COLOMode get_colo_mode(void);
/* failover */
void colo_do_failover(MigrationState *s);
+
+bool colo_shutdown(void);
#endif
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 3bb8897..91eeda3 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -52,6 +52,8 @@ typedef enum WakeupReason {
QEMU_WAKEUP_REASON_OTHER,
} WakeupReason;
+extern int colo_shutdown_requested;
+
void qemu_system_reset_request(void);
void qemu_system_suspend_request(void);
void qemu_register_suspend_notifier(Notifier *notifier);
@@ -59,6 +61,7 @@ void qemu_system_wakeup_request(WakeupReason reason);
void qemu_system_wakeup_enable(WakeupReason reason, bool enabled);
void qemu_register_wakeup_notifier(Notifier *notifier);
void qemu_system_shutdown_request(void);
+void qemu_system_shutdown_request_core(void);
void qemu_system_powerdown_request(void);
void qemu_register_powerdown_notifier(Notifier *notifier);
void qemu_system_debug_request(void);
diff --git a/migration/colo.c b/migration/colo.c
index de01ade..2bea519 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -248,6 +248,7 @@ static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
static int colo_do_checkpoint_transaction(MigrationState *s,
QEMUSizedBuffer *buffer)
{
+ int colo_shutdown;
QEMUFile *trans = NULL;
size_t size;
Error *local_err = NULL;
@@ -277,6 +278,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
qemu_mutex_unlock_iothread();
goto out;
}
+ colo_shutdown = colo_shutdown_requested;
vm_stop_force_state(RUN_STATE_COLO);
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("run", "stop");
@@ -330,6 +332,18 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ if (colo_shutdown) {
+ colo_put_cmd(s->to_dst_file, COLO_COMMAND_GUEST_SHUTDOWN, &local_err);
+ if (local_err) {
+ goto out;
+ }
+ qemu_fflush(s->to_dst_file);
+ colo_shutdown_requested = 0;
+ qemu_system_shutdown_request_core();
+ /* Fix me: Just let the colo thread exit ? */
+ qemu_thread_exit(0);
+ }
+
ret = 0;
/* Resume primary guest */
qemu_mutex_lock_iothread();
@@ -390,8 +404,9 @@ static void colo_process_checkpoint(MigrationState *s)
}
current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
- if (current_time - checkpoint_time <
- s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) {
+ if ((current_time - checkpoint_time <
+ s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY]) &&
+ !colo_shutdown_requested) {
int64_t delay_ms;
delay_ms = s->parameters[MIGRATION_PARAMETER_X_CHECKPOINT_DELAY] -
@@ -465,6 +480,15 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
case COLO_COMMAND_CHECKPOINT_REQUEST:
*checkpoint_request = 1;
break;
+ case COLO_COMMAND_GUEST_SHUTDOWN:
+ qemu_mutex_lock_iothread();
+ vm_stop_force_state(RUN_STATE_COLO);
+ qemu_system_shutdown_request_core();
+ qemu_mutex_unlock_iothread();
+ /* the main thread will exit and terminate the whole
+ * process, do we need some cleanup?
+ */
+ qemu_thread_exit(0);
default:
*checkpoint_request = 0;
error_setg(errp, "Got unknown COLO command: %d", cmd);
@@ -636,3 +660,19 @@ out:
return NULL;
}
+
+bool colo_shutdown(void)
+{
+ /*
+ * if in colo mode, we need do some significant work before respond
+ * to the shutdown request.
+ */
+ if (migration_incoming_in_colo_state()) {
+ return true; /* primary's responsibility */
+ }
+ if (migration_in_colo_state()) {
+ colo_shutdown_requested = 1;
+ return true;
+ }
+ return false;
+}
diff --git a/qapi-schema.json b/qapi-schema.json
index 94f23a6..24e93d1 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -752,12 +752,14 @@
#
# @vmstate-loaded: VM's state has been loaded by SVM.
#
+# @guest-shutdown: shutdown require from PVM to SVM
+#
# Since: 2.6
##
{ 'enum': 'COLOCommand',
'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
'vmstate-send', 'vmstate-size', 'vmstate-received',
- 'vmstate-loaded' ] }
+ 'vmstate-loaded', 'guest-shutdown' ] }
##
# @COLOMode
diff --git a/vl.c b/vl.c
index ffb5b76..f3590e7 100644
--- a/vl.c
+++ b/vl.c
@@ -1636,6 +1636,8 @@ static NotifierList wakeup_notifiers =
NOTIFIER_LIST_INITIALIZER(wakeup_notifiers);
static uint32_t wakeup_reason_mask = ~(1 << QEMU_WAKEUP_REASON_NONE);
+int colo_shutdown_requested;
+
int qemu_shutdown_requested_get(void)
{
return shutdown_requested;
@@ -1767,7 +1769,10 @@ void qemu_system_guest_panicked(void)
void qemu_system_reset_request(void)
{
if (no_reboot) {
- shutdown_requested = 1;
+ qemu_system_shutdown_request();
+ if (!shutdown_requested) {/* colo handle it ? */
+ return;
+ }
} else {
reset_requested = 1;
}
@@ -1840,14 +1845,22 @@ void qemu_system_killed(int signal, pid_t pid)
qemu_notify_event();
}
-void qemu_system_shutdown_request(void)
+void qemu_system_shutdown_request_core(void)
{
- trace_qemu_system_shutdown_request();
replay_shutdown_request();
shutdown_requested = 1;
qemu_notify_event();
}
+void qemu_system_shutdown_request(void)
+{
+ trace_qemu_system_shutdown_request();
+ if (colo_shutdown()) {
+ return;
+ }
+ qemu_system_shutdown_request_core();
+}
+
static void qemu_system_powerdown(void)
{
qapi_event_send_powerdown(&error_abort);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 29/39] COLO: Update the global runstate after going into colo state
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (27 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 30/39] savevm: Split load vm state function qemu_loadvm_state zhanghailiang
` (10 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
If we start qemu with -S, the runstate will change from 'prelaunch' to 'running'
after going into colo state.
So it is necessary to update the global runstate after going into colo state.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Add Reviewed-by tag
---
migration/colo.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 2bea519..fd87f34 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -397,6 +397,11 @@ static void colo_process_checkpoint(MigrationState *s)
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
+ ret = global_state_store();
+ if (ret < 0) {
+ goto out;
+ }
+
while (s->state == MIGRATION_STATUS_COLO) {
if (failover_request_is_active()) {
error_report("failover request");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 30/39] savevm: Split load vm state function qemu_loadvm_state
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (28 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 29/39] COLO: Update the global runstate after going into colo state zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
` (9 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
qemu_loadvm_state is too long, and we can simplify it by splitting up
with three helper functions.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v13:
- Add Reviewed-by tag
---
migration/savevm.c | 156 +++++++++++++++++++++++++++++++----------------------
1 file changed, 92 insertions(+), 64 deletions(-)
diff --git a/migration/savevm.c b/migration/savevm.c
index f102870..dcfb473 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1710,90 +1710,118 @@ void loadvm_free_handlers(MigrationIncomingState *mis)
}
}
+static int
+qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
+{
+ uint32_t instance_id, version_id, section_id;
+ SaveStateEntry *se;
+ LoadStateEntry *le;
+ char idstr[256];
+ int ret;
+
+ /* Read section start */
+ section_id = qemu_get_be32(f);
+ if (!qemu_get_counted_string(f, idstr)) {
+ error_report("Unable to read ID string for section %u",
+ section_id);
+ return -EINVAL;
+ }
+ instance_id = qemu_get_be32(f);
+ version_id = qemu_get_be32(f);
+
+ trace_qemu_loadvm_state_section_startfull(section_id, idstr,
+ instance_id, version_id);
+ /* Find savevm section */
+ se = find_se(idstr, instance_id);
+ if (se == NULL) {
+ error_report("Unknown savevm section or instance '%s' %d",
+ idstr, instance_id);
+ return -EINVAL;
+ }
+
+ /* Validate version */
+ if (version_id > se->version_id) {
+ error_report("savevm: unsupported version %d for '%s' v%d",
+ version_id, idstr, se->version_id);
+ return -EINVAL;
+ }
+
+ /* Add entry */
+ le = g_malloc0(sizeof(*le));
+
+ le->se = se;
+ le->section_id = section_id;
+ le->version_id = version_id;
+ QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
+
+ ret = vmstate_load(f, le->se, le->version_id);
+ if (ret < 0) {
+ error_report("error while loading state for instance 0x%x of"
+ " device '%s'", instance_id, idstr);
+ return ret;
+ }
+ if (!check_section_footer(f, le)) {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
+{
+ uint32_t section_id;
+ LoadStateEntry *le;
+ int ret;
+
+ section_id = qemu_get_be32(f);
+
+ trace_qemu_loadvm_state_section_partend(section_id);
+ QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
+ if (le->section_id == section_id) {
+ break;
+ }
+ }
+ if (le == NULL) {
+ error_report("Unknown savevm section %d", section_id);
+ return -EINVAL;
+ }
+
+ ret = vmstate_load(f, le->se, le->version_id);
+ if (ret < 0) {
+ error_report("error while loading state section id %d(%s)",
+ section_id, le->se->idstr);
+ return ret;
+ }
+ if (!check_section_footer(f, le)) {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
{
uint8_t section_type;
int ret;
while ((section_type = qemu_get_byte(f)) != QEMU_VM_EOF) {
- uint32_t instance_id, version_id, section_id;
- SaveStateEntry *se;
- LoadStateEntry *le;
- char idstr[256];
trace_qemu_loadvm_state_section(section_type);
switch (section_type) {
case QEMU_VM_SECTION_START:
case QEMU_VM_SECTION_FULL:
- /* Read section start */
- section_id = qemu_get_be32(f);
- if (!qemu_get_counted_string(f, idstr)) {
- error_report("Unable to read ID string for section %u",
- section_id);
- return -EINVAL;
- }
- instance_id = qemu_get_be32(f);
- version_id = qemu_get_be32(f);
-
- trace_qemu_loadvm_state_section_startfull(section_id, idstr,
- instance_id, version_id);
- /* Find savevm section */
- se = find_se(idstr, instance_id);
- if (se == NULL) {
- error_report("Unknown savevm section or instance '%s' %d",
- idstr, instance_id);
- return -EINVAL;
- }
-
- /* Validate version */
- if (version_id > se->version_id) {
- error_report("savevm: unsupported version %d for '%s' v%d",
- version_id, idstr, se->version_id);
- return -EINVAL;
- }
-
- /* Add entry */
- le = g_malloc0(sizeof(*le));
-
- le->se = se;
- le->section_id = section_id;
- le->version_id = version_id;
- QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
-
- ret = vmstate_load(f, le->se, le->version_id);
+ ret = qemu_loadvm_section_start_full(f, mis);
if (ret < 0) {
- error_report("error while loading state for instance 0x%x of"
- " device '%s'", instance_id, idstr);
return ret;
}
- if (!check_section_footer(f, le)) {
- return -EINVAL;
- }
break;
case QEMU_VM_SECTION_PART:
case QEMU_VM_SECTION_END:
- section_id = qemu_get_be32(f);
-
- trace_qemu_loadvm_state_section_partend(section_id);
- QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
- if (le->section_id == section_id) {
- break;
- }
- }
- if (le == NULL) {
- error_report("Unknown savevm section %d", section_id);
- return -EINVAL;
- }
-
- ret = vmstate_load(f, le->se, le->version_id);
+ ret = qemu_loadvm_section_part_end(f, mis);
if (ret < 0) {
- error_report("error while loading state section id %d(%s)",
- section_id, le->se->idstr);
return ret;
}
- if (!check_section_footer(f, le)) {
- return -EINVAL;
- }
break;
case QEMU_VM_COMMAND:
ret = loadvm_process_command(f);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (29 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 30/39] savevm: Split load vm state function qemu_loadvm_state zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-26 19:59 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state zhanghailiang
` (8 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
For COLO's checkpoint process, we will do savevm/loadvm repeatedly.
So every time we call qemu_loadvm_section_start_full(), we will
add all sections information into loadvm_handlers list for one time.
There will be many instances in loadvm_handlers for one section,
and this will lead to memory leak.
We need to check if we have the section info in loadvm_handlers list
before save it. For normal migration, it is harmless.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
---
v13:
- New patch
---
migration/savevm.c | 56 ++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 40 insertions(+), 16 deletions(-)
diff --git a/migration/savevm.c b/migration/savevm.c
index dcfb473..7ceec2d 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1710,6 +1710,37 @@ void loadvm_free_handlers(MigrationIncomingState *mis)
}
}
+static LoadStateEntry *loadvm_save_section_entry(MigrationIncomingState *mis,
+ SaveStateEntry *se,
+ uint32_t section_id,
+ uint32_t version_id)
+{
+ LoadStateEntry *le;
+
+ /* Add entry */
+ le = g_malloc0(sizeof(*le));
+
+ le->se = se;
+ le->section_id = section_id;
+ le->version_id = version_id;
+ QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
+ return le;
+}
+
+static LoadStateEntry *loadvm_find_section_entry(MigrationIncomingState *mis,
+ uint32_t section_id)
+{
+ LoadStateEntry *le;
+
+ QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
+ if (le->section_id == section_id) {
+ break;
+ }
+ }
+
+ return le;
+}
+
static int
qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
{
@@ -1745,16 +1776,12 @@ qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
version_id, idstr, se->version_id);
return -EINVAL;
}
-
- /* Add entry */
- le = g_malloc0(sizeof(*le));
-
- le->se = se;
- le->section_id = section_id;
- le->version_id = version_id;
- QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
-
- ret = vmstate_load(f, le->se, le->version_id);
+ /* Check if we have saved this section info before, if not, save it */
+ le = loadvm_find_section_entry(mis, section_id);
+ if (!le) {
+ le = loadvm_save_section_entry(mis, se, section_id, version_id);
+ }
+ ret = vmstate_load(f, se, version_id);
if (ret < 0) {
error_report("error while loading state for instance 0x%x of"
" device '%s'", instance_id, idstr);
@@ -1777,12 +1804,9 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
section_id = qemu_get_be32(f);
trace_qemu_loadvm_state_section_partend(section_id);
- QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
- if (le->section_id == section_id) {
- break;
- }
- }
- if (le == NULL) {
+
+ le = loadvm_find_section_entry(mis, section_id);
+ if (!le) {
error_report("Unknown savevm section %d", section_id);
return -EINVAL;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (30 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-27 14:14 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 33/39] COLO: Split qemu_savevm_state_begin out of checkpoint process zhanghailiang
` (7 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
We separate the process of saving/loading ram and device state when do checkpoint,
we add new helpers for save/load ram/device. With this change, we can directly
transfer ram from master to slave without using QEMUSizeBuffer as assistant,
which also reduce the size of extra memory been used during checkpoint.
Besides, we move the colo_flush_ram_cache to the proper position after the
above change.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
v13:
- Re-use some existed helper functions to realize saving/loading ram and device.
v11:
- Remove load configuration section in qemu_loadvm_state_begin()
---
include/sysemu/sysemu.h | 6 +++++
migration/colo.c | 47 ++++++++++++++++++++++++++---------
migration/ram.c | 5 ----
migration/savevm.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++---
4 files changed, 104 insertions(+), 20 deletions(-)
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 91eeda3..f553f8a 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -133,7 +133,13 @@ void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint64_t *start_list,
uint64_t *length_list);
+void qemu_savevm_live_state(QEMUFile *f);
+int qemu_save_device_state(QEMUFile *f);
+
int qemu_loadvm_state(QEMUFile *f);
+int qemu_loadvm_state_begin(QEMUFile *f);
+int qemu_load_ram_state(QEMUFile *f);
+int qemu_load_device_state(QEMUFile *f);
typedef enum DisplayType
{
diff --git a/migration/colo.c b/migration/colo.c
index fd87f34..4a99819 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -290,21 +290,34 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
+ if (local_err) {
+ goto out;
+ }
+
/* Disable block migration */
s->params.blk = 0;
s->params.shared = 0;
- qemu_savevm_state_header(trans);
- qemu_savevm_state_begin(trans, &s->params);
- qemu_mutex_lock_iothread();
- qemu_savevm_state_complete_precopy(trans, false);
- qemu_mutex_unlock_iothread();
-
- qemu_fflush(trans);
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ error_report("save vm state begin error");
+ goto out;
+ }
- colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
- if (local_err) {
+ qemu_mutex_lock_iothread();
+ /* Only save VM's live state, which not including device state */
+ qemu_savevm_live_state(s->to_dst_file);
+ /* Note: device state is saved into buffer */
+ ret = qemu_save_device_state(trans);
+ if (ret < 0) {
+ error_report("save device state error\n");
+ qemu_mutex_unlock_iothread();
goto out;
}
+ qemu_fflush(trans);
+ qemu_mutex_unlock_iothread();
+
/* we send the total size of the vmstate first */
size = qsb_get_length(buffer);
colo_put_cmd_value(s->to_dst_file, COLO_COMMAND_VMSTATE_SIZE,
@@ -573,6 +586,16 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ ret = qemu_loadvm_state_begin(mis->from_src_file);
+ if (ret < 0) {
+ error_report("load vm state begin error, ret=%d", ret);
+ goto out;
+ }
+ ret = qemu_load_ram_state(mis->from_src_file);
+ if (ret < 0) {
+ error_report("load ram state error");
+ goto out;
+ }
/* read the VM state total size first */
value = colo_get_cmd_value(mis->from_src_file,
COLO_COMMAND_VMSTATE_SIZE, &local_err);
@@ -605,8 +628,10 @@ void *colo_process_incoming_thread(void *opaque)
qemu_mutex_lock_iothread();
qemu_system_reset(VMRESET_SILENT);
vmstate_loading = true;
- if (qemu_loadvm_state(fb) < 0) {
- error_report("COLO: loadvm failed");
+ colo_flush_ram_cache();
+ ret = qemu_load_device_state(fb);
+ if (ret < 0) {
+ error_report("COLO: load device state failed\n");
vmstate_loading = false;
qemu_mutex_unlock_iothread();
goto out;
diff --git a/migration/ram.c b/migration/ram.c
index 8ff7f7c..45d9332 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -2458,7 +2458,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
* be atomic
*/
bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
- bool need_flush = false;
seq_iter++;
@@ -2493,7 +2492,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
/* After going into COLO, we should load the Page into colo_cache */
if (ram_cache_enable) {
host = colo_cache_from_block_offset(block, addr);
- need_flush = true;
} else {
host = host_from_ram_block_offset(block, addr);
}
@@ -2588,9 +2586,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
rcu_read_unlock();
- if (!ret && ram_cache_enable && need_flush) {
- colo_flush_ram_cache();
- }
DPRINTF("Completed load of VM with exit code %d seq iteration "
"%" PRIu64 "\n", ret, seq_iter);
return ret;
diff --git a/migration/savevm.c b/migration/savevm.c
index 7ceec2d..7892070 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -50,6 +50,7 @@
#include "qemu/iov.h"
#include "block/snapshot.h"
#include "block/qapi.h"
+#include "migration/colo.h"
#ifndef ETH_P_RARP
@@ -923,6 +924,10 @@ void qemu_savevm_state_begin(QEMUFile *f,
break;
}
}
+ if (migration_in_colo_state()) {
+ qemu_put_byte(f, QEMU_VM_EOF);
+ qemu_fflush(f);
+ }
}
/*
@@ -1192,13 +1197,20 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
return ret;
}
-static int qemu_save_device_state(QEMUFile *f)
+void qemu_savevm_live_state(QEMUFile *f)
{
- SaveStateEntry *se;
+ /* save QEMU_VM_SECTION_END section */
+ qemu_savevm_state_complete_precopy(f, true);
+ qemu_put_byte(f, QEMU_VM_EOF);
+}
- qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
- qemu_put_be32(f, QEMU_VM_FILE_VERSION);
+int qemu_save_device_state(QEMUFile *f)
+{
+ SaveStateEntry *se;
+ if (!migration_in_colo_state()) {
+ qemu_savevm_state_header(f);
+ }
cpu_synchronize_all_states();
QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
@@ -1957,6 +1969,52 @@ int qemu_loadvm_state(QEMUFile *f)
return ret;
}
+int qemu_loadvm_state_begin(QEMUFile *f)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ Error *local_err = NULL;
+ int ret;
+
+ if (qemu_savevm_state_blocked(&local_err)) {
+ error_report_err(local_err);
+ return -EINVAL;
+ }
+ /* Load QEMU_VM_SECTION_START section */
+ ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_report("Failed to loadvm begin work: %d", ret);
+ }
+ return ret;
+}
+
+int qemu_load_ram_state(QEMUFile *f)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ int ret;
+
+ ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_report("Failed to load ram state: %d", ret);
+ }
+ return ret;
+}
+
+int qemu_load_device_state(QEMUFile *f)
+{
+ MigrationIncomingState *mis = migration_incoming_get_current();
+ int ret;
+
+ /* Load QEMU_VM_SECTION_FULL section */
+ ret = qemu_loadvm_state_main(f, mis);
+ if (ret < 0) {
+ error_report("Failed to load device state: %d", ret);
+ return ret;
+ }
+
+ cpu_synchronize_all_post_init();
+ return 0;
+}
+
void hmp_savevm(Monitor *mon, const QDict *qdict)
{
BlockDriverState *bs, *bs1;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 33/39] COLO: Split qemu_savevm_state_begin out of checkpoint process
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (31 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev zhanghailiang
` (6 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
It is unnecessary to call qemu_savevm_state_begin() in every checkponit process.
It mainly sets up devices and does the first device state pass. These data will
not change during the later checkpoint process. So, we split it out of
colo_do_checkpoint_transaction(), in this way, we can reduce these data
transferring in the later checkpoint.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
v13:
- Fix some minor issues found by Dave
- Add Reviewed-by tag
---
migration/colo.c | 51 ++++++++++++++++++++++++++++++++++++---------------
1 file changed, 36 insertions(+), 15 deletions(-)
diff --git a/migration/colo.c b/migration/colo.c
index 4a99819..bd68e86 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -295,16 +295,6 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
- /* Disable block migration */
- s->params.blk = 0;
- s->params.shared = 0;
- qemu_savevm_state_begin(s->to_dst_file, &s->params);
- ret = qemu_file_get_error(s->to_dst_file);
- if (ret < 0) {
- error_report("save vm state begin error");
- goto out;
- }
-
qemu_mutex_lock_iothread();
/* Only save VM's live state, which not including device state */
qemu_savevm_live_state(s->to_dst_file);
@@ -374,6 +364,21 @@ out:
return ret;
}
+static int colo_prepare_before_save(MigrationState *s)
+{
+ int ret;
+
+ /* Disable block migration */
+ s->params.blk = 0;
+ s->params.shared = 0;
+ qemu_savevm_state_begin(s->to_dst_file, &s->params);
+ ret = qemu_file_get_error(s->to_dst_file);
+ if (ret < 0) {
+ error_report("save vm state begin error");
+ }
+ return ret;
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
@@ -389,6 +394,11 @@ static void colo_process_checkpoint(MigrationState *s)
goto out;
}
+ ret = colo_prepare_before_save(s);
+ if (ret < 0) {
+ goto out;
+ }
+
/*
* Wait for Secondary finish loading vm states and enter COLO
* restore.
@@ -514,6 +524,17 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
}
}
+static int colo_prepare_before_load(QEMUFile *f)
+{
+ int ret;
+
+ ret = qemu_loadvm_state_begin(f);
+ if (ret < 0) {
+ error_report("load vm state begin error, ret=%d", ret);
+ }
+ return ret;
+}
+
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
@@ -554,6 +575,11 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ ret = colo_prepare_before_load(mis->from_src_file);
+ if (ret < 0) {
+ goto out;
+ }
+
colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -586,11 +612,6 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
- ret = qemu_loadvm_state_begin(mis->from_src_file);
- if (ret < 0) {
- error_report("load vm state begin error, ret=%d", ret);
- goto out;
- }
ret = qemu_load_ram_state(mis->from_src_file);
if (ret < 0) {
error_report("load ram state error");
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (32 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 33/39] COLO: Split qemu_savevm_state_begin out of checkpoint process zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-11 1:26 ` Hailiang Zhang
2016-01-19 3:19 ` Jason Wang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval zhanghailiang
` (5 subsequent siblings)
39 siblings, 2 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Jason Wang, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, zhanghailiang,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
We add each netdev (except vhost-net) a default filter-buffer,
which will be used for COLO or Micro-checkpoint to buffer VM's packets.
The name of default filter-buffer is 'nop'.
For the default filter-buffer, it will not buffer any packets in default.
So it has no side effect for the netdev.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v12:
- Skip vhost-net when add default filter
- Don't go through filter layer if the filter is disabled.
v11:
- New patch
---
include/net/filter.h | 10 +++++++
net/filter-buffer.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
net/filter.c | 6 +++-
net/net.c | 12 ++++++++
4 files changed, 109 insertions(+), 1 deletion(-)
diff --git a/include/net/filter.h b/include/net/filter.h
index 2deda36..40aa38c 100644
--- a/include/net/filter.h
+++ b/include/net/filter.h
@@ -56,6 +56,8 @@ struct NetFilterState {
NetClientState *netdev;
NetFilterDirection direction;
char info_str[256];
+ bool is_default;
+ bool enabled;
QTAILQ_ENTRY(NetFilterState) next;
};
@@ -74,4 +76,12 @@ ssize_t qemu_netfilter_pass_to_next(NetClientState *sender,
int iovcnt,
void *opaque);
+static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
+{
+ return nf->enabled ? false : true;
+}
+
+void netdev_add_default_filter_buffer(const char *netdev_id,
+ NetFilterDirection direction,
+ Error **errp);
#endif /* QEMU_NET_FILTER_H */
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index 57be149..9cf3544 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -14,6 +14,13 @@
#include "qapi/qmp/qerror.h"
#include "qapi-visit.h"
#include "qom/object.h"
+#include "net/net.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp-output-visitor.h"
+#include "qapi/qmp-input-visitor.h"
+#include "monitor/monitor.h"
+#include "qmp-commands.h"
+#include "net/vhost_net.h"
#define TYPE_FILTER_BUFFER "filter-buffer"
@@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState *nf)
static void filter_buffer_setup(NetFilterState *nf, Error **errp)
{
FilterBufferState *s = FILTER_BUFFER(nf);
+ char *path = object_get_canonical_path_component(OBJECT(nf));
/*
* We may want to accept zero interval when VM FT solutions like MC
@@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
}
s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
+ nf->is_default = !strcmp(path, "nop");
+ /*
+ * For the default buffer filter, it will be disabled by default,
+ * So it will not buffer any packets.
+ */
+ if (nf->is_default) {
+ nf->enabled = false;
+ }
if (s->interval) {
timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
filter_buffer_release_timer, nf);
@@ -163,6 +179,72 @@ out:
error_propagate(errp, local_err);
}
+/*
+* This will be used by COLO or MC FT, for which they will need
+* to buffer the packets of VM's net devices, Here we add a default
+* buffer filter for each netdev. The name of default buffer filter is
+* 'nop'
+*/
+void netdev_add_default_filter_buffer(const char *netdev_id,
+ NetFilterDirection direction,
+ Error **errp)
+{
+ QmpOutputVisitor *qov;
+ QmpInputVisitor *qiv;
+ Visitor *ov, *iv;
+ QObject *obj = NULL;
+ QDict *qdict;
+ void *dummy = NULL;
+ const char *id = "nop";
+ char *queue = g_strdup(NetFilterDirection_lookup[direction]);
+ NetClientState *nc = qemu_find_netdev(netdev_id);
+ Error *err = NULL;
+
+ /* FIXME: Not support multiple queues */
+ if (!nc || nc->queue_index > 1) {
+ g_free(queue);
+ return;
+ }
+ /* Not support vhost-net */
+ if (get_vhost_net(nc)) {
+ g_free(queue);
+ return;
+ }
+ qov = qmp_output_visitor_new();
+ ov = qmp_output_get_visitor(qov);
+ visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
+ if (err) {
+ goto out;
+ }
+ visit_type_str(ov, &nc->name, "netdev", &err);
+ if (err) {
+ goto out;
+ }
+ visit_type_str(ov, &queue, "queue", &err);
+ if (err) {
+ goto out;
+ }
+ visit_end_struct(ov, &err);
+ if (err) {
+ goto out;
+ }
+ obj = qmp_output_get_qobject(qov);
+ g_assert(obj != NULL);
+ qdict = qobject_to_qdict(obj);
+ qmp_output_visitor_cleanup(qov);
+
+ qiv = qmp_input_visitor_new(obj);
+ iv = qmp_input_get_visitor(qiv);
+ object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
+ qmp_input_visitor_cleanup(qiv);
+ qobject_decref(obj);
+out:
+ g_free(queue);
+ if (err) {
+ error_propagate(errp, err);
+ }
+}
+
static void filter_buffer_init(Object *obj)
{
object_property_add(obj, "interval", "int",
diff --git a/net/filter.c b/net/filter.c
index 1365bad..0b1e408 100644
--- a/net/filter.c
+++ b/net/filter.c
@@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
}
nf->netdev = ncs[0];
-
+ nf->is_default = false;
+ nf->enabled = true;
if (nfc->setup) {
nfc->setup(nf, &local_err);
if (local_err) {
@@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
g_free(info);
}
object_property_iter_free(iter);
+ info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
+ g_strlcat(nf->info_str, info, sizeof(nf->info_str));
+ g_free(info);
}
static void netfilter_finalize(Object *obj)
diff --git a/net/net.c b/net/net.c
index 87dd356..fd53cfc 100644
--- a/net/net.c
+++ b/net/net.c
@@ -581,6 +581,10 @@ static ssize_t filter_receive_iov(NetClientState *nc,
NetFilterState *nf = NULL;
QTAILQ_FOREACH(nf, &nc->filters, next) {
+ /* Don't go through filter if it is off */
+ if (qemu_need_skip_netfilter(nf)) {
+ continue;
+ }
ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
iovcnt, sent_cb);
if (ret) {
@@ -1028,6 +1032,14 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
}
return -1;
}
+
+ if (is_netdev) {
+ const Netdev *netdev = object;
+
+ netdev_add_default_filter_buffer(netdev->id,
+ NET_FILTER_DIRECTION_RX,
+ errp);
+ }
return 0;
}
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (33 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-19 3:21 ` Jason Wang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter zhanghailiang
` (4 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Jason Wang, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, zhanghailiang,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
For default buffer filter, its 'interval' value is zero,
so here we should accept zero interval.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Cc: Jason Wang <jasowang@redhat.com>
---
v12:
- Add Reviewed-by tag
v11:
- Add comment
v10:
- new patch
---
net/filter-buffer.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index 9cf3544..8abac94 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -111,16 +111,6 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
FilterBufferState *s = FILTER_BUFFER(nf);
char *path = object_get_canonical_path_component(OBJECT(nf));
- /*
- * We may want to accept zero interval when VM FT solutions like MC
- * or COLO use this filter to release packets on demand.
- */
- if (!s->interval) {
- error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "interval",
- "a non-zero interval");
- return;
- }
-
s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
nf->is_default = !strcmp(path, "nop");
/*
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (34 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-19 3:35 ` Jason Wang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 37/39] filter-buffer: Introduce a helper function to release packets zhanghailiang
` (3 subsequent siblings)
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Jason Wang, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, zhanghailiang,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
The default buffer filter doesn't buffer packets in default,
but we need to buffer packets for COLO or Micro-checkpoint,
Here we add a helper function to enable/disable filter's buffer
capability.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v12:
- Rename the heler function to qemu_set_default_filters_status()
v11:
- New patch
---
include/net/filter.h | 1 +
include/net/net.h | 4 ++++
net/filter-buffer.c | 19 +++++++++++++++++++
net/net.c | 29 +++++++++++++++++++++++++++++
4 files changed, 53 insertions(+)
diff --git a/include/net/filter.h b/include/net/filter.h
index 40aa38c..08aa604 100644
--- a/include/net/filter.h
+++ b/include/net/filter.h
@@ -84,4 +84,5 @@ static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
void netdev_add_default_filter_buffer(const char *netdev_id,
NetFilterDirection direction,
Error **errp);
+void qemu_set_default_filters_status(bool enable);
#endif /* QEMU_NET_FILTER_H */
diff --git a/include/net/net.h b/include/net/net.h
index 7af3e15..5c65c45 100644
--- a/include/net/net.h
+++ b/include/net/net.h
@@ -125,6 +125,10 @@ NetClientState *qemu_find_vlan_client_by_name(Monitor *mon, int vlan_id,
const char *client_str);
typedef void (*qemu_nic_foreach)(NICState *nic, void *opaque);
void qemu_foreach_nic(qemu_nic_foreach func, void *opaque);
+typedef void (*qemu_netfilter_foreach)(NetFilterState *nf, void *opaque,
+ Error **errp);
+void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
+ Error **errp);
int qemu_can_send_packet(NetClientState *nc);
ssize_t qemu_sendv_packet(NetClientState *nc, const struct iovec *iov,
int iovcnt);
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index 8abac94..90a50cc 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -169,6 +169,25 @@ out:
error_propagate(errp, local_err);
}
+static void set_default_filter_status(NetFilterState *nf,
+ void *opaque,
+ Error **errp)
+{
+ if (!strcmp(object_get_typename(OBJECT(nf)), TYPE_FILTER_BUFFER)) {
+ bool *status = opaque;
+
+ if (nf->is_default) {
+ nf->enabled = *status;
+ }
+ }
+}
+
+void qemu_set_default_filters_status(bool enable)
+{
+ qemu_foreach_netfilter(set_default_filter_status,
+ &enable, NULL);
+}
+
/*
* This will be used by COLO or MC FT, for which they will need
* to buffer the packets of VM's net devices, Here we add a default
diff --git a/net/net.c b/net/net.c
index fd53cfc..30946c5 100644
--- a/net/net.c
+++ b/net/net.c
@@ -259,6 +259,35 @@ static char *assign_name(NetClientState *nc1, const char *model)
return g_strdup_printf("%s.%d", model, id);
}
+void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
+ Error **errp)
+{
+ NetClientState *nc;
+ NetFilterState *nf;
+
+ QTAILQ_FOREACH(nc, &net_clients, next) {
+ if (nc->info->type == NET_CLIENT_OPTIONS_KIND_NIC) {
+ continue;
+ }
+ /* FIXME: Not support multiqueue */
+ if (nc->queue_index > 1) {
+ error_setg(errp, "%s: multiqueue is not supported", __func__);
+ return;
+ }
+ QTAILQ_FOREACH(nf, &nc->filters, next) {
+ if (func) {
+ Error *local_err = NULL;
+
+ func(nf, opaque, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+ }
+ }
+ }
+}
+
static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 37/39] filter-buffer: Introduce a helper function to release packets
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (35 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and " zhanghailiang
` (2 subsequent siblings)
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Jason Wang, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, zhanghailiang,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
We need to release all the packets from VM in COLO or Micro-checkpoint,
here we add a new helper function to realse the packets that buffered
by default buffer-filter
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v12:
- Rename this helper function
v11:
- New patch
---
include/net/filter.h | 1 +
net/filter-buffer.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
diff --git a/include/net/filter.h b/include/net/filter.h
index 08aa604..52cb38b 100644
--- a/include/net/filter.h
+++ b/include/net/filter.h
@@ -84,5 +84,6 @@ static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
void netdev_add_default_filter_buffer(const char *netdev_id,
NetFilterDirection direction,
Error **errp);
+void qemu_release_default_filters_packets(void);
void qemu_set_default_filters_status(bool enable);
#endif /* QEMU_NET_FILTER_H */
diff --git a/net/filter-buffer.c b/net/filter-buffer.c
index 90a50cc..d53b251 100644
--- a/net/filter-buffer.c
+++ b/net/filter-buffer.c
@@ -169,6 +169,24 @@ out:
error_propagate(errp, local_err);
}
+static void release_default_filter_packets(NetFilterState *nf,
+ void *opaque,
+ Error **errp)
+{
+ if (!strcmp(object_get_typename(OBJECT(nf)), TYPE_FILTER_BUFFER)) {
+
+ if (nf->is_default) {
+ filter_buffer_flush(nf);
+ }
+ }
+}
+
+/* public APIs */
+void qemu_release_default_filters_packets(void)
+{
+ qemu_foreach_netfilter(release_default_filter_packets, NULL, NULL);
+}
+
static void set_default_filter_status(NetFilterState *nf,
void *opaque,
Error **errp)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and release packets
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (36 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 37/39] filter-buffer: Introduce a helper function to release packets zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2016-01-19 3:59 ` Jason Wang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 39/39] COLO: Add block replication into colo process zhanghailiang
2015-12-29 7:14 ` [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Hailiang Zhang
39 siblings, 1 reply; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Jason Wang, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, zhanghailiang,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
Enable default filter to buffer packets and release the
packets after a checkpoint.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Yang Hongyang <hongyang.yang@easystack.cn>
---
v12:
- Add a helper function to check if all netdev supports buffer packets.
- Flush buffered packets when do failover.
v11:
- Use new helper functions to buffer and release packets.
---
include/net/net.h | 1 +
migration/colo.c | 25 ++++++++++++++++++++++++-
net/net.c | 17 +++++++++++++++++
3 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/include/net/net.h b/include/net/net.h
index 5c65c45..2eb9451 100644
--- a/include/net/net.h
+++ b/include/net/net.h
@@ -129,6 +129,7 @@ typedef void (*qemu_netfilter_foreach)(NetFilterState *nf, void *opaque,
Error **errp);
void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
Error **errp);
+bool qemu_netdev_support_netfilter(void);
int qemu_can_send_packet(NetClientState *nc);
ssize_t qemu_sendv_packet(NetClientState *nc, const struct iovec *iov,
int iovcnt);
diff --git a/migration/colo.c b/migration/colo.c
index bd68e86..23e1131 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -18,6 +18,8 @@
#include "qemu/error-report.h"
#include "migration/failover.h"
#include "qapi-event.h"
+#include "net/filter.h"
+#include "net/net.h"
static bool vmstate_loading;
@@ -129,6 +131,11 @@ static void primary_vm_do_failover(void)
old_state);
return;
}
+ /* Don't buffer any packets while exited COLO */
+ qemu_set_default_filters_status(false);
+ /* Flush the residuary buffered packts */
+ qemu_release_default_filters_packets();
+
/* Notify COLO thread that failover work is finished */
qemu_sem_post(&s->colo_sem);
}
@@ -335,6 +342,8 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ qemu_release_default_filters_packets();
+
if (colo_shutdown) {
colo_put_cmd(s->to_dst_file, COLO_COMMAND_GUEST_SHUTDOWN, &local_err);
if (local_err) {
@@ -379,6 +388,17 @@ static int colo_prepare_before_save(MigrationState *s)
return ret;
}
+static int colo_init_buffer_filters(void)
+{
+ if (!qemu_netdev_support_netfilter()) {
+ return -EPERM;
+ }
+ /* Begin to buffer packets that sent by VM */
+ qemu_set_default_filters_status(true);
+
+ return 0;
+}
+
static void colo_process_checkpoint(MigrationState *s)
{
QEMUSizedBuffer *buffer = NULL;
@@ -387,7 +407,10 @@ static void colo_process_checkpoint(MigrationState *s)
int ret;
failover_init_state();
-
+ ret = colo_init_buffer_filters();
+ if (ret < 0) {
+ goto out;
+ }
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
diff --git a/net/net.c b/net/net.c
index 30946c5..4678a6e 100644
--- a/net/net.c
+++ b/net/net.c
@@ -288,6 +288,23 @@ void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
}
}
+bool qemu_netdev_support_netfilter(void)
+{
+ NetClientState *nc;
+
+ QTAILQ_FOREACH(nc, &net_clients, next) {
+ if (nc->info->type == NET_CLIENT_OPTIONS_KIND_NIC) {
+ continue;
+ }
+ if (QTAILQ_EMPTY(&nc->filters)) {
+ error_report("netdev (%s) does not support filter", nc->name);
+ return false;
+ }
+ }
+
+ return true;
+}
+
static void qemu_net_client_destructor(NetClientState *nc)
{
g_free(nc);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* [Qemu-devel] [PATCH COLO-Frame v13 39/39] COLO: Add block replication into colo process
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (37 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and " zhanghailiang
@ 2015-12-29 7:09 ` zhanghailiang
2015-12-29 7:14 ` [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Hailiang Zhang
39 siblings, 0 replies; 63+ messages in thread
From: zhanghailiang @ 2015-12-29 7:09 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, zhanghailiang, arei.gonglei, stefanha,
amit.shah, zhangchen.fnst, hongyang.yang
Make sure master start block replication after slave's block replication started.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
---
migration/colo.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++
trace-events | 2 ++
2 files changed, 54 insertions(+)
diff --git a/migration/colo.c b/migration/colo.c
index 23e1131..c08a3ff 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -20,6 +20,7 @@
#include "qapi-event.h"
#include "net/filter.h"
#include "net/net.h"
+#include "block/block_int.h"
static bool vmstate_loading;
@@ -54,6 +55,7 @@ static void secondary_vm_do_failover(void)
{
int old_state;
MigrationIncomingState *mis = migration_incoming_get_current();
+ Error *local_err = NULL;
/* Can not do failover during the process of VM's loading VMstate, Or
* it will break the secondary VM.
@@ -71,6 +73,12 @@ static void secondary_vm_do_failover(void)
migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
+ bdrv_stop_replication_all(true, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ trace_colo_stop_block_replication("failover");
+
if (!autostart) {
error_report("\"-S\" qemu option will be ignored in secondary side");
/* recover runstate to normal migration finish state */
@@ -108,6 +116,7 @@ static void primary_vm_do_failover(void)
{
MigrationState *s = migrate_get_current();
int old_state;
+ Error *local_err = NULL;
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
@@ -136,6 +145,12 @@ static void primary_vm_do_failover(void)
/* Flush the residuary buffered packts */
qemu_release_default_filters_packets();
+ bdrv_stop_replication_all(true, &local_err);
+ if (local_err) {
+ error_report_err(local_err);
+ }
+ trace_colo_stop_block_replication("failover");
+
/* Notify COLO thread that failover work is finished */
qemu_sem_post(&s->colo_sem);
}
@@ -297,6 +312,14 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
goto out;
}
+ /* we call this api although this may do nothing on primary side */
+ qemu_mutex_lock_iothread();
+ bdrv_do_checkpoint_all(&local_err);
+ qemu_mutex_unlock_iothread();
+ if (local_err) {
+ goto out;
+ }
+
colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
if (local_err) {
goto out;
@@ -345,6 +368,10 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
qemu_release_default_filters_packets();
if (colo_shutdown) {
+ qemu_mutex_lock_iothread();
+ bdrv_stop_replication_all(false, NULL);
+ trace_colo_stop_block_replication("shutdown");
+ qemu_mutex_unlock_iothread();
colo_put_cmd(s->to_dst_file, COLO_COMMAND_GUEST_SHUTDOWN, &local_err);
if (local_err) {
goto out;
@@ -439,6 +466,13 @@ static void colo_process_checkpoint(MigrationState *s)
}
qemu_mutex_lock_iothread();
+ /* start block replication */
+ bdrv_start_replication_all(REPLICATION_MODE_PRIMARY, &local_err);
+ if (local_err) {
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
+ trace_colo_start_block_replication();
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
@@ -534,6 +568,8 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
case COLO_COMMAND_GUEST_SHUTDOWN:
qemu_mutex_lock_iothread();
vm_stop_force_state(RUN_STATE_COLO);
+ bdrv_stop_replication_all(false, NULL);
+ trace_colo_stop_block_replication("shutdown");
qemu_system_shutdown_request_core();
qemu_mutex_unlock_iothread();
/* the main thread will exit and terminate the whole
@@ -603,6 +639,15 @@ void *colo_process_incoming_thread(void *opaque)
goto out;
}
+ qemu_mutex_lock_iothread();
+ /* start block replication */
+ bdrv_start_replication_all(REPLICATION_MODE_SECONDARY, &local_err);
+ qemu_mutex_unlock_iothread();
+ if (local_err) {
+ goto out;
+ }
+ trace_colo_start_block_replication();
+
colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
&local_err);
if (local_err) {
@@ -680,6 +725,13 @@ void *colo_process_incoming_thread(void *opaque)
qemu_mutex_unlock_iothread();
goto out;
}
+ /* discard colo disk buffer */
+ bdrv_do_checkpoint_all(&local_err);
+ if (local_err) {
+ vmstate_loading = false;
+ qemu_mutex_unlock_iothread();
+ goto out;
+ }
vmstate_loading = false;
qemu_mutex_unlock_iothread();
diff --git a/trace-events b/trace-events
index a50bf45..e04acde 100644
--- a/trace-events
+++ b/trace-events
@@ -1586,6 +1586,8 @@ colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
colo_put_cmd(const char *msg) "Send '%s' cmd"
colo_get_cmd(const char *msg) "Receive '%s' cmd"
colo_failover_set_state(int new_state) "new state %d"
+colo_start_block_replication(void) "Block replication is started"
+colo_stop_block_replication(const char *reason) "Block replication is stopped(reason: '%s')"
# kvm-all.c
kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
--
1.8.3.1
^ permalink raw reply related [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT)
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
` (38 preceding siblings ...)
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 39/39] COLO: Add block replication into colo process zhanghailiang
@ 2015-12-29 7:14 ` Hailiang Zhang
39 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2015-12-29 7:14 UTC (permalink / raw)
To: qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, dgilbert,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
Cc: Markus Armbruster <armbru@redhat.com>
On 2015/12/29 15:08, zhanghailiang wrote:
> This is the 13th version of COLO (Still only support periodic checkpoint).
>
> Here is only COLO frame part, you can get the whole codes from github:
> https://github.com/coloft/qemu/commits/colo-v2.4-periodic-mode
>
> Please ignore patch 4 ~ 5 which have been picked by Dave into another series.
>
> Test procedure:
> 1. Startup qemu
> Primary side:
> #x86_64-softmmu/qemu-system-x86_64 -enable-kvm -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 -name primary -cpu qemu64,+kvmclock -device piix3-usb-uhci -device usb-tablet -netdev tap,id=hn0,vhost=off -device virtio-net-pci,id=net-pci0,netdev=hn0 -drive if=virtio,id=colo-disk0,driver=quorum,read-pattern=fifo,vote-threshold=1,children.0.file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,children.0.driver=raw
> Secondary side:
> #x86_64-softmmu/qemu-system-x86_64 -boot c -m 2048 -smp 2 -qmp stdio -vnc :7 -name secondary -enable-kvm -cpu qemu64,+kvmclock -device piix3-usb-uhci -device usb-tablet -netdev tap,id=hn0,vhost=off -device virtio-net-pci,id=net-pci0,netdev=hn0 -drive if=none,id=colo-disk0,file.filename=/mnt/sdd/pure_IMG/linux/redhat/rhel_6.5_64_2U_ide,driver=raw,node-name=node0 -drive if=virtio,id=active-disk0,throttling.bps-total=70000000,driver=replication,mode=secondary,file.driver=qcow2,file.file.filename=/mnt/ramfs/active_disk.img,file.backing.driver=qcow2,file.backing.file.filename=/mnt/ramfs/hidden_disk.img,file.backing.backing=colo-disk0 -incoming tcp:0:8888
> 2. On Secondary VM's QEMU monitor, issue command
> {'execute':'qmp_capabilities'}
> {'execute': 'nbd-server-start', 'arguments': {'addr': {'type': 'inet', 'data': {'host': '192.168.2.88', 'port': '8889'} } } }
> {'execute': 'nbd-server-add', 'arguments': {'device': 'colo-disk0', 'writable': true } }
> {'execute': 'trace-event-set-state', 'arguments': {'name': 'colo*', 'enable': true} }
>
> 3. On Primary VM's QEMU monitor, issue command:
> {'execute':'qmp_capabilities'}
> {'execute': 'human-monitor-command', 'arguments': {'command-line': 'drive_add buddy driver=replication,mode=primary,file.driver=nbd,file.host=9.61.1.7,file.port=8889,file.export=colo-disk0,node-name=node0,if=none'}}
> {'execute':'x-blockdev-change', 'arguments':{'parent': 'colo-disk0', 'node': 'node0' } }
> {'execute': 'migrate-set-capabilities', 'arguments': {'capabilities': [ {'capability': 'x-colo', 'state': true } ] } }
> {'execute': 'migrate', 'arguments': {'uri': 'tcp:192.168.2.88:8888' } }
>
> 4. After the above steps, you will see, whenever you make changes to PVM, SVM will be synced.
> You can by issue command '{ "execute": "migrate-set-parameters" , "arguments":{ "x-checkpoint-delay": 2000 } }'
> to change the checkpoint period time.
>
> 5. Failover test
> You can kill Primary VM and run 'x_colo_lost_heartbeat' in Secondary VM's
> monitor at the same time, then SVM will failover and client will not feel this
> change.
>
> Before issuing '{ "execute": "x-colo-lost-heartbeat" }' command, we have to
> issue block related command to stop block replication.
> Primary:
> Remove the nbd child from the quorum:
> { 'execute': 'x-blockdev-change', 'arguments': {'parent': 'colo-disk0', 'child': 'children.1'}}
> Note: there is no qmp command to remove the blockdev now
>
> Secondary:
> The primary host is down, so we should do the following thing:
> { 'execute': 'nbd-server-stop' }
>
> Please review, thanks.
>
> TODO:
> 1. Checkpoint based on proxy in qemu
> 2. The capability of continuous FT
> 3. Optimize the VM's downtime during checkpoint
>
> v13:
> - Refactor colo_*_cmd helper functions to use 'Error **errp' parameter
> instead of return value to indicate success or failure. (patch 10)
> - Remove the optional error message for COLO_EXIT event. (patch 25)
> - Use semaphore to notify colo/colo incoming loop that failover work is
> finished. (patch 26)
> - Move COLO shutdown related codes to colo.c file. (patch 28)
> - Fix memory leak bug for colo incoming loop. (new patch 31)
> - Re-use some existed helper functions to realize the process of
> saving/loading ram and device. (patch 32)
> - Fix some other comments from Dave and Markus.
>
> v12:
> - Fix the bug that default buffer filter broken vhost-net.
> - Add an flag in struct NetFilterState to help skipping default
> filter for packets travelling through filter layer.
> - Remove the default failover treatment which may cause split-brain.
> - Rename checkpoint-delay to x-checkpoint-delay.
> - Check if all netdev supports default filter before going into COLO.
> - Reconstruct send/receive helper functions in patch 10.
> - Address serveral other comments from Dave
>
> v11:
> - Re-implement buffer/release packets based on filter-buffer according
> to Jason Wang's suggestion. (patch 34, patch 36 ~ patch 38)
> - Rebase master to re-use some stuff introduced by post-copy.
> - Address several comments from Eric and Dave, the fixing record can
> be found in each patch.
>
> v10:
> - Rename 'colo_lost_heartbeat' command to experimental 'x_colo_lost_heartbeat'
> - Rename migration capability 'colo' to 'x-colo' (Eric's suggestion)
> - Simplify the process of primary side by dropping colo thread and reusing
> migration thread. (Dave's suggestion)
> - Add several netfilter related APIs to support buffer/release packets
> for COLO (patch 32 ~ patch 36)
>
> zhanghailiang (39):
> configure: Add parameter for configure to enable/disable COLO support
> migration: Introduce capability 'x-colo' to migration
> COLO: migrate colo related info to secondary node
> migration: Export migrate_set_state()
> migration: Add state records for migration incoming
> migration: Integrate COLO checkpoint process into migration
> migration: Integrate COLO checkpoint process into loadvm
> migration: Rename the'file' member of MigrationState
> COLO/migration: Create a new communication path from destination to
> source
> COLO: Implement colo checkpoint protocol
> COLO: Add a new RunState RUN_STATE_COLO
> QEMUSizedBuffer: Introduce two help functions for qsb
> COLO: Save PVM state to secondary side when do checkpoint
> ram: Split host_from_stream_offset() into two helper functions
> COLO: Load PVM's dirty pages into SVM's RAM cache temporarily
> ram/COLO: Record the dirty pages that SVM received
> COLO: Load VMState into qsb before restore it
> COLO: Flush PVM's cached RAM into SVM's memory
> COLO: Add checkpoint-delay parameter for migrate-set-parameters
> COLO: synchronize PVM's state to SVM periodically
> COLO failover: Introduce a new command to trigger a failover
> COLO failover: Introduce state to record failover process
> COLO: Implement failover work for Primary VM
> COLO: Implement failover work for Secondary VM
> qmp event: Add COLO_EXIT event to notify users while exited from COLO
> COLO failover: Shutdown related socket fd when do failover
> COLO failover: Don't do failover during loading VM's state
> COLO: Process shutdown command for VM in COLO state
> COLO: Update the global runstate after going into colo state
> savevm: Split load vm state function qemu_loadvm_state
> savevm: Introduce two helper functions for save/find loadvm_handlers
> entry
> COLO: Separate the process of saving/loading ram and device state
> COLO: Split qemu_savevm_state_begin out of checkpoint process
> net/filter-buffer: Add default filter-buffer for each netdev
> filter-buffer: Accept zero interval
> filter-buffer: Introduce a helper function to enable/disable default
> filter
> filter-buffer: Introduce a helper function to release packets
> colo: Use default buffer-filter to buffer and release packets
> COLO: Add block replication into colo process
>
> configure | 11 +
> docs/qmp-events.txt | 16 +
> hmp-commands.hx | 15 +
> hmp.c | 15 +
> hmp.h | 1 +
> include/exec/ram_addr.h | 9 +-
> include/migration/colo.h | 40 +++
> include/migration/failover.h | 33 ++
> include/migration/migration.h | 21 +-
> include/migration/qemu-file.h | 3 +-
> include/net/filter.h | 12 +
> include/net/net.h | 5 +
> include/sysemu/sysemu.h | 9 +
> migration/Makefile.objs | 2 +
> migration/colo-comm.c | 71 ++++
> migration/colo-failover.c | 83 +++++
> migration/colo.c | 804 ++++++++++++++++++++++++++++++++++++++++++
> migration/exec.c | 4 +-
> migration/fd.c | 4 +-
> migration/migration.c | 216 ++++++++----
> migration/postcopy-ram.c | 6 +-
> migration/qemu-file-buf.c | 61 ++++
> migration/ram.c | 213 +++++++++--
> migration/rdma.c | 2 +-
> migration/savevm.c | 248 +++++++++----
> migration/tcp.c | 4 +-
> migration/unix.c | 4 +-
> net/filter-buffer.c | 127 ++++++-
> net/filter.c | 6 +-
> net/net.c | 58 +++
> qapi-schema.json | 104 +++++-
> qapi/event.json | 15 +
> qmp-commands.hx | 24 +-
> stubs/Makefile.objs | 1 +
> stubs/migration-colo.c | 45 +++
> trace-events | 10 +
> vl.c | 30 +-
> 37 files changed, 2135 insertions(+), 197 deletions(-)
> create mode 100644 include/migration/colo.h
> create mode 100644 include/migration/failover.h
> create mode 100644 migration/colo-comm.c
> create mode 100644 migration/colo-failover.c
> create mode 100644 migration/colo.c
> create mode 100644 stubs/migration-colo.c
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it zhanghailiang
@ 2016-01-04 19:00 ` Dr. David Alan Gilbert
2016-01-11 1:16 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Dr. David Alan Gilbert @ 2016-01-04 19:00 UTC (permalink / raw)
To: zhanghailiang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> We should not destroy the state of SVM (Secondary VM) until we receive the whole
> state from the PVM (Primary VM), in case the primary fails in the middle of sending
> the state, so, here we cache the device state in Secondary before restore it.
>
> Besides, we should call qemu_system_reset() before load VM state,
> which can ensure the data is intact.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> v13:
> - Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
> return value.
> v12:
> - Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
> ---
> migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 72 insertions(+), 2 deletions(-)
>
> diff --git a/migration/colo.c b/migration/colo.c
> index 925eb3c..8414feb 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -114,6 +114,28 @@ static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
> }
> }
>
> +static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
> + Error **errp)
> +{
> + Error *local_err = NULL;
> + uint64_t value;
> + int ret;
> +
> + colo_get_check_cmd(f, expect_cmd, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + return 0;
> + }
> +
> + value = qemu_get_be64(f);
> + ret = qemu_file_get_error(f);
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Failed to get value for COlO commnd: %s",
Tiny typo; you've used 'CO*l*O' rather than 'COLO' - actually all your other errors say 'colo'
so it's probably best to standardise.
Dave
> + COLOCommand_lookup[expect_cmd]);
> + }
> + return value;
> +}
> +
> static int colo_do_checkpoint_transaction(MigrationState *s,
> QEMUSizedBuffer *buffer)
> {
> @@ -297,6 +319,10 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
> void *colo_process_incoming_thread(void *opaque)
> {
> MigrationIncomingState *mis = opaque;
> + QEMUFile *fb = NULL;
> + QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
> + uint64_t total_size;
> + uint64_t value;
> Error *local_err = NULL;
> int ret;
>
> @@ -320,6 +346,12 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> + buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
> + if (buffer == NULL) {
> + error_report("Failed to allocate colo buffer!");
> + goto out;
> + }
> +
> colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
> &local_err);
> if (local_err) {
> @@ -347,7 +379,21 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> - /* TODO: read migration data into colo buffer */
> + /* read the VM state total size first */
> + value = colo_get_cmd_value(mis->from_src_file,
> + COLO_COMMAND_VMSTATE_SIZE, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* read vm device state into colo buffer */
> + total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
> + if (total_size != value) {
> + error_report("Got %lu VMState data, less than expected %lu",
> + total_size, value);
> + ret = -EINVAL;
> + goto out;
> + }
>
> colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
> &local_err);
> @@ -355,13 +401,32 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> - /* TODO: load vm state */
> + /* open colo buffer for read */
> + fb = qemu_bufopen("r", buffer);
> + if (!fb) {
> + error_report("Can't open colo buffer for read");
> + goto out;
> + }
> +
> + qemu_mutex_lock_iothread();
> + qemu_system_reset(VMRESET_SILENT);
> + if (qemu_loadvm_state(fb) < 0) {
> + error_report("COLO: loadvm failed");
> + qemu_mutex_unlock_iothread();
> + goto out;
> + }
> + qemu_mutex_unlock_iothread();
> +
> + /* TODO: flush vm state */
>
> colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
> &local_err);
> if (local_err) {
> goto out;
> }
> +
> + qemu_fclose(fb);
> + fb = NULL;
> }
>
> out:
> @@ -370,6 +435,11 @@ out:
> error_report_err(local_err);
> }
>
> + if (fb) {
> + qemu_fclose(fb);
> + }
> + qsb_free(buffer);
> +
> qemu_mutex_lock_iothread();
> colo_release_ram_cache();
> qemu_mutex_unlock_iothread();
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it
2016-01-04 19:00 ` Dr. David Alan Gilbert
@ 2016-01-11 1:16 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-11 1:16 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 2016/1/5 3:00, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> We should not destroy the state of SVM (Secondary VM) until we receive the whole
>> state from the PVM (Primary VM), in case the primary fails in the middle of sending
>> the state, so, here we cache the device state in Secondary before restore it.
>>
>> Besides, we should call qemu_system_reset() before load VM state,
>> which can ensure the data is intact.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
>> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>> v13:
>> - Fix the define of colo_get_cmd_value() to use 'Error **errp' instead of
>> return value.
>> v12:
>> - Use the new helper colo_get_cmd_value() instead of colo_ctl_get()
>> ---
>> migration/colo.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 72 insertions(+), 2 deletions(-)
>>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index 925eb3c..8414feb 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -114,6 +114,28 @@ static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
>> }
>> }
>>
>> +static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
>> + Error **errp)
>> +{
>> + Error *local_err = NULL;
>> + uint64_t value;
>> + int ret;
>> +
>> + colo_get_check_cmd(f, expect_cmd, &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> + return 0;
>> + }
>> +
>> + value = qemu_get_be64(f);
>> + ret = qemu_file_get_error(f);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Failed to get value for COlO commnd: %s",
>
> Tiny typo; you've used 'CO*l*O' rather than 'COLO' - actually all your other errors say 'colo'
> so it's probably best to standardise.
>
OK, i will fix them all in next version, thanks.
> Dave
>
>> + COLOCommand_lookup[expect_cmd]);
>> + }
>> + return value;
>> +}
>> +
>> static int colo_do_checkpoint_transaction(MigrationState *s,
>> QEMUSizedBuffer *buffer)
>> {
>> @@ -297,6 +319,10 @@ static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
>> void *colo_process_incoming_thread(void *opaque)
>> {
>> MigrationIncomingState *mis = opaque;
>> + QEMUFile *fb = NULL;
>> + QEMUSizedBuffer *buffer = NULL; /* Cache incoming device state */
>> + uint64_t total_size;
>> + uint64_t value;
>> Error *local_err = NULL;
>> int ret;
>>
>> @@ -320,6 +346,12 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> + buffer = qsb_create(NULL, COLO_BUFFER_BASE_SIZE);
>> + if (buffer == NULL) {
>> + error_report("Failed to allocate colo buffer!");
>> + goto out;
>> + }
>> +
>> colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
>> &local_err);
>> if (local_err) {
>> @@ -347,7 +379,21 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> - /* TODO: read migration data into colo buffer */
>> + /* read the VM state total size first */
>> + value = colo_get_cmd_value(mis->from_src_file,
>> + COLO_COMMAND_VMSTATE_SIZE, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* read vm device state into colo buffer */
>> + total_size = qsb_fill_buffer(buffer, mis->from_src_file, value);
>> + if (total_size != value) {
>> + error_report("Got %lu VMState data, less than expected %lu",
>> + total_size, value);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>>
>> colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
>> &local_err);
>> @@ -355,13 +401,32 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> - /* TODO: load vm state */
>> + /* open colo buffer for read */
>> + fb = qemu_bufopen("r", buffer);
>> + if (!fb) {
>> + error_report("Can't open colo buffer for read");
>> + goto out;
>> + }
>> +
>> + qemu_mutex_lock_iothread();
>> + qemu_system_reset(VMRESET_SILENT);
>> + if (qemu_loadvm_state(fb) < 0) {
>> + error_report("COLO: loadvm failed");
>> + qemu_mutex_unlock_iothread();
>> + goto out;
>> + }
>> + qemu_mutex_unlock_iothread();
>> +
>> + /* TODO: flush vm state */
>>
>> colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
>> &local_err);
>> if (local_err) {
>> goto out;
>> }
>> +
>> + qemu_fclose(fb);
>> + fb = NULL;
>> }
>>
>> out:
>> @@ -370,6 +435,11 @@ out:
>> error_report_err(local_err);
>> }
>>
>> + if (fb) {
>> + qemu_fclose(fb);
>> + }
>> + qsb_free(buffer);
>> +
>> qemu_mutex_lock_iothread();
>> colo_release_ram_cache();
>> qemu_mutex_unlock_iothread();
>> --
>> 1.8.3.1
>>
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev zhanghailiang
@ 2016-01-11 1:26 ` Hailiang Zhang
2016-01-19 1:46 ` Hailiang Zhang
2016-01-19 3:19 ` Jason Wang
1 sibling, 1 reply; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-11 1:26 UTC (permalink / raw)
To: qemu-devel, Jason Wang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
Hi Jason,
Could you please help reviewing the filter part of this series ?
Thanks,
Hailiang
On 2015/12/29 15:09, zhanghailiang wrote:
> We add each netdev (except vhost-net) a default filter-buffer,
> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
> The name of default filter-buffer is 'nop'.
> For the default filter-buffer, it will not buffer any packets in default.
> So it has no side effect for the netdev.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v12:
> - Skip vhost-net when add default filter
> - Don't go through filter layer if the filter is disabled.
> v11:
> - New patch
> ---
> include/net/filter.h | 10 +++++++
> net/filter-buffer.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> net/filter.c | 6 +++-
> net/net.c | 12 ++++++++
> 4 files changed, 109 insertions(+), 1 deletion(-)
>
> diff --git a/include/net/filter.h b/include/net/filter.h
> index 2deda36..40aa38c 100644
> --- a/include/net/filter.h
> +++ b/include/net/filter.h
> @@ -56,6 +56,8 @@ struct NetFilterState {
> NetClientState *netdev;
> NetFilterDirection direction;
> char info_str[256];
> + bool is_default;
> + bool enabled;
> QTAILQ_ENTRY(NetFilterState) next;
> };
>
> @@ -74,4 +76,12 @@ ssize_t qemu_netfilter_pass_to_next(NetClientState *sender,
> int iovcnt,
> void *opaque);
>
> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
> +{
> + return nf->enabled ? false : true;
> +}
> +
> +void netdev_add_default_filter_buffer(const char *netdev_id,
> + NetFilterDirection direction,
> + Error **errp);
> #endif /* QEMU_NET_FILTER_H */
> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
> index 57be149..9cf3544 100644
> --- a/net/filter-buffer.c
> +++ b/net/filter-buffer.c
> @@ -14,6 +14,13 @@
> #include "qapi/qmp/qerror.h"
> #include "qapi-visit.h"
> #include "qom/object.h"
> +#include "net/net.h"
> +#include "qapi/qmp/qdict.h"
> +#include "qapi/qmp-output-visitor.h"
> +#include "qapi/qmp-input-visitor.h"
> +#include "monitor/monitor.h"
> +#include "qmp-commands.h"
> +#include "net/vhost_net.h"
>
> #define TYPE_FILTER_BUFFER "filter-buffer"
>
> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState *nf)
> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
> {
> FilterBufferState *s = FILTER_BUFFER(nf);
> + char *path = object_get_canonical_path_component(OBJECT(nf));
>
> /*
> * We may want to accept zero interval when VM FT solutions like MC
> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
> }
>
> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
> + nf->is_default = !strcmp(path, "nop");
> + /*
> + * For the default buffer filter, it will be disabled by default,
> + * So it will not buffer any packets.
> + */
> + if (nf->is_default) {
> + nf->enabled = false;
> + }
> if (s->interval) {
> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
> filter_buffer_release_timer, nf);
> @@ -163,6 +179,72 @@ out:
> error_propagate(errp, local_err);
> }
>
> +/*
> +* This will be used by COLO or MC FT, for which they will need
> +* to buffer the packets of VM's net devices, Here we add a default
> +* buffer filter for each netdev. The name of default buffer filter is
> +* 'nop'
> +*/
> +void netdev_add_default_filter_buffer(const char *netdev_id,
> + NetFilterDirection direction,
> + Error **errp)
> +{
> + QmpOutputVisitor *qov;
> + QmpInputVisitor *qiv;
> + Visitor *ov, *iv;
> + QObject *obj = NULL;
> + QDict *qdict;
> + void *dummy = NULL;
> + const char *id = "nop";
> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
> + NetClientState *nc = qemu_find_netdev(netdev_id);
> + Error *err = NULL;
> +
> + /* FIXME: Not support multiple queues */
> + if (!nc || nc->queue_index > 1) {
> + g_free(queue);
> + return;
> + }
> + /* Not support vhost-net */
> + if (get_vhost_net(nc)) {
> + g_free(queue);
> + return;
> + }
> + qov = qmp_output_visitor_new();
> + ov = qmp_output_get_visitor(qov);
> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
> + if (err) {
> + goto out;
> + }
> + visit_type_str(ov, &nc->name, "netdev", &err);
> + if (err) {
> + goto out;
> + }
> + visit_type_str(ov, &queue, "queue", &err);
> + if (err) {
> + goto out;
> + }
> + visit_end_struct(ov, &err);
> + if (err) {
> + goto out;
> + }
> + obj = qmp_output_get_qobject(qov);
> + g_assert(obj != NULL);
> + qdict = qobject_to_qdict(obj);
> + qmp_output_visitor_cleanup(qov);
> +
> + qiv = qmp_input_visitor_new(obj);
> + iv = qmp_input_get_visitor(qiv);
> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
> + qmp_input_visitor_cleanup(qiv);
> + qobject_decref(obj);
> +out:
> + g_free(queue);
> + if (err) {
> + error_propagate(errp, err);
> + }
> +}
> +
> static void filter_buffer_init(Object *obj)
> {
> object_property_add(obj, "interval", "int",
> diff --git a/net/filter.c b/net/filter.c
> index 1365bad..0b1e408 100644
> --- a/net/filter.c
> +++ b/net/filter.c
> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
> }
>
> nf->netdev = ncs[0];
> -
> + nf->is_default = false;
> + nf->enabled = true;
> if (nfc->setup) {
> nfc->setup(nf, &local_err);
> if (local_err) {
> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
> g_free(info);
> }
> object_property_iter_free(iter);
> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
> + g_free(info);
> }
>
> static void netfilter_finalize(Object *obj)
> diff --git a/net/net.c b/net/net.c
> index 87dd356..fd53cfc 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -581,6 +581,10 @@ static ssize_t filter_receive_iov(NetClientState *nc,
> NetFilterState *nf = NULL;
>
> QTAILQ_FOREACH(nf, &nc->filters, next) {
> + /* Don't go through filter if it is off */
> + if (qemu_need_skip_netfilter(nf)) {
> + continue;
> + }
> ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
> iovcnt, sent_cb);
> if (ret) {
> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
> }
> return -1;
> }
> +
> + if (is_netdev) {
> + const Netdev *netdev = object;
> +
> + netdev_add_default_filter_buffer(netdev->id,
> + NET_FILTER_DIRECTION_RX,
> + errp);
> + }
> return 0;
> }
>
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-11 1:26 ` Hailiang Zhang
@ 2016-01-19 1:46 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-19 1:46 UTC (permalink / raw)
To: Jason Wang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
qemu-devel, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, peter.huangpeng, hongyang.yang
ping?
The other part of this series have been fully reviewed except this net related part.
We hope COLO frame could be merged in qemu 2.6, so please help us.
Any comments will be welcomed, thanks.
zhanghailiang
On 2016/1/11 9:26, Hailiang Zhang wrote:
> Hi Jason,
>
> Could you please help reviewing the filter part of this series ?
>
> Thanks,
> Hailiang
>
> On 2015/12/29 15:09, zhanghailiang wrote:
>> We add each netdev (except vhost-net) a default filter-buffer,
>> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
>> The name of default filter-buffer is 'nop'.
>> For the default filter-buffer, it will not buffer any packets in default.
>> So it has no side effect for the netdev.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>> ---
>> v12:
>> - Skip vhost-net when add default filter
>> - Don't go through filter layer if the filter is disabled.
>> v11:
>> - New patch
>> ---
>> include/net/filter.h | 10 +++++++
>> net/filter-buffer.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>> net/filter.c | 6 +++-
>> net/net.c | 12 ++++++++
>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/net/filter.h b/include/net/filter.h
>> index 2deda36..40aa38c 100644
>> --- a/include/net/filter.h
>> +++ b/include/net/filter.h
>> @@ -56,6 +56,8 @@ struct NetFilterState {
>> NetClientState *netdev;
>> NetFilterDirection direction;
>> char info_str[256];
>> + bool is_default;
>> + bool enabled;
>> QTAILQ_ENTRY(NetFilterState) next;
>> };
>>
>> @@ -74,4 +76,12 @@ ssize_t qemu_netfilter_pass_to_next(NetClientState *sender,
>> int iovcnt,
>> void *opaque);
>>
>> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
>> +{
>> + return nf->enabled ? false : true;
>> +}
>> +
>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>> + NetFilterDirection direction,
>> + Error **errp);
>> #endif /* QEMU_NET_FILTER_H */
>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>> index 57be149..9cf3544 100644
>> --- a/net/filter-buffer.c
>> +++ b/net/filter-buffer.c
>> @@ -14,6 +14,13 @@
>> #include "qapi/qmp/qerror.h"
>> #include "qapi-visit.h"
>> #include "qom/object.h"
>> +#include "net/net.h"
>> +#include "qapi/qmp/qdict.h"
>> +#include "qapi/qmp-output-visitor.h"
>> +#include "qapi/qmp-input-visitor.h"
>> +#include "monitor/monitor.h"
>> +#include "qmp-commands.h"
>> +#include "net/vhost_net.h"
>>
>> #define TYPE_FILTER_BUFFER "filter-buffer"
>>
>> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState *nf)
>> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>> {
>> FilterBufferState *s = FILTER_BUFFER(nf);
>> + char *path = object_get_canonical_path_component(OBJECT(nf));
>>
>> /*
>> * We may want to accept zero interval when VM FT solutions like MC
>> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>> }
>>
>> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
>> + nf->is_default = !strcmp(path, "nop");
>> + /*
>> + * For the default buffer filter, it will be disabled by default,
>> + * So it will not buffer any packets.
>> + */
>> + if (nf->is_default) {
>> + nf->enabled = false;
>> + }
>> if (s->interval) {
>> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
>> filter_buffer_release_timer, nf);
>> @@ -163,6 +179,72 @@ out:
>> error_propagate(errp, local_err);
>> }
>>
>> +/*
>> +* This will be used by COLO or MC FT, for which they will need
>> +* to buffer the packets of VM's net devices, Here we add a default
>> +* buffer filter for each netdev. The name of default buffer filter is
>> +* 'nop'
>> +*/
>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>> + NetFilterDirection direction,
>> + Error **errp)
>> +{
>> + QmpOutputVisitor *qov;
>> + QmpInputVisitor *qiv;
>> + Visitor *ov, *iv;
>> + QObject *obj = NULL;
>> + QDict *qdict;
>> + void *dummy = NULL;
>> + const char *id = "nop";
>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>> + Error *err = NULL;
>> +
>> + /* FIXME: Not support multiple queues */
>> + if (!nc || nc->queue_index > 1) {
>> + g_free(queue);
>> + return;
>> + }
>> + /* Not support vhost-net */
>> + if (get_vhost_net(nc)) {
>> + g_free(queue);
>> + return;
>> + }
>> + qov = qmp_output_visitor_new();
>> + ov = qmp_output_get_visitor(qov);
>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_type_str(ov, &nc->name, "netdev", &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_type_str(ov, &queue, "queue", &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_end_struct(ov, &err);
>> + if (err) {
>> + goto out;
>> + }
>> + obj = qmp_output_get_qobject(qov);
>> + g_assert(obj != NULL);
>> + qdict = qobject_to_qdict(obj);
>> + qmp_output_visitor_cleanup(qov);
>> +
>> + qiv = qmp_input_visitor_new(obj);
>> + iv = qmp_input_get_visitor(qiv);
>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>> + qmp_input_visitor_cleanup(qiv);
>> + qobject_decref(obj);
>> +out:
>> + g_free(queue);
>> + if (err) {
>> + error_propagate(errp, err);
>> + }
>> +}
>> +
>> static void filter_buffer_init(Object *obj)
>> {
>> object_property_add(obj, "interval", "int",
>> diff --git a/net/filter.c b/net/filter.c
>> index 1365bad..0b1e408 100644
>> --- a/net/filter.c
>> +++ b/net/filter.c
>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
>> }
>>
>> nf->netdev = ncs[0];
>> -
>> + nf->is_default = false;
>> + nf->enabled = true;
>> if (nfc->setup) {
>> nfc->setup(nf, &local_err);
>> if (local_err) {
>> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
>> g_free(info);
>> }
>> object_property_iter_free(iter);
>> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
>> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
>> + g_free(info);
>> }
>>
>> static void netfilter_finalize(Object *obj)
>> diff --git a/net/net.c b/net/net.c
>> index 87dd356..fd53cfc 100644
>> --- a/net/net.c
>> +++ b/net/net.c
>> @@ -581,6 +581,10 @@ static ssize_t filter_receive_iov(NetClientState *nc,
>> NetFilterState *nf = NULL;
>>
>> QTAILQ_FOREACH(nf, &nc->filters, next) {
>> + /* Don't go through filter if it is off */
>> + if (qemu_need_skip_netfilter(nf)) {
>> + continue;
>> + }
>> ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
>> iovcnt, sent_cb);
>> if (ret) {
>> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
>> }
>> return -1;
>> }
>> +
>> + if (is_netdev) {
>> + const Netdev *netdev = object;
>> +
>> + netdev_add_default_filter_buffer(netdev->id,
>> + NET_FILTER_DIRECTION_RX,
>> + errp);
>> + }
>> return 0;
>> }
>>
>>
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev zhanghailiang
2016-01-11 1:26 ` Hailiang Zhang
@ 2016-01-19 3:19 ` Jason Wang
2016-01-19 8:39 ` Hailiang Zhang
1 sibling, 1 reply; 63+ messages in thread
From: Jason Wang @ 2016-01-19 3:19 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 12/29/2015 03:09 PM, zhanghailiang wrote:
> We add each netdev (except vhost-net) a default filter-buffer,
> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
> The name of default filter-buffer is 'nop'.
> For the default filter-buffer, it will not buffer any packets in default.
> So it has no side effect for the netdev.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
This patch did three things:
1) the ability to enable or disable a netfilter
2) the ability to add a default filter
3) default filter attaching for filter-buffer
Better to split them into separate small patches.
And several questions:
For 1), I'm not sure this is real needed, we can in fact disable a
filter by removing it.
For 2), Instead of a specific code just for filter buffer, I think we
need a generic method for an arbitrary filter to be used as default.
And if we can achieve 2), 3) is not needed any more.
> ---
> v12:
> - Skip vhost-net when add default filter
> - Don't go through filter layer if the filter is disabled.
> v11:
> - New patch
> ---
> include/net/filter.h | 10 +++++++
> net/filter-buffer.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> net/filter.c | 6 +++-
> net/net.c | 12 ++++++++
> 4 files changed, 109 insertions(+), 1 deletion(-)
>
> diff --git a/include/net/filter.h b/include/net/filter.h
> index 2deda36..40aa38c 100644
> --- a/include/net/filter.h
> +++ b/include/net/filter.h
> @@ -56,6 +56,8 @@ struct NetFilterState {
> NetClientState *netdev;
> NetFilterDirection direction;
> char info_str[256];
> + bool is_default;
> + bool enabled;
> QTAILQ_ENTRY(NetFilterState) next;
> };
>
> @@ -74,4 +76,12 @@ ssize_t qemu_netfilter_pass_to_next(NetClientState *sender,
> int iovcnt,
> void *opaque);
>
> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
> +{
> + return nf->enabled ? false : true;
> +}
> +
> +void netdev_add_default_filter_buffer(const char *netdev_id,
> + NetFilterDirection direction,
> + Error **errp);
> #endif /* QEMU_NET_FILTER_H */
> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
> index 57be149..9cf3544 100644
> --- a/net/filter-buffer.c
> +++ b/net/filter-buffer.c
> @@ -14,6 +14,13 @@
> #include "qapi/qmp/qerror.h"
> #include "qapi-visit.h"
> #include "qom/object.h"
> +#include "net/net.h"
> +#include "qapi/qmp/qdict.h"
> +#include "qapi/qmp-output-visitor.h"
> +#include "qapi/qmp-input-visitor.h"
> +#include "monitor/monitor.h"
> +#include "qmp-commands.h"
> +#include "net/vhost_net.h"
>
> #define TYPE_FILTER_BUFFER "filter-buffer"
>
> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState *nf)
> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
> {
> FilterBufferState *s = FILTER_BUFFER(nf);
> + char *path = object_get_canonical_path_component(OBJECT(nf));
>
> /*
> * We may want to accept zero interval when VM FT solutions like MC
> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
> }
>
> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
> + nf->is_default = !strcmp(path, "nop");
> + /*
> + * For the default buffer filter, it will be disabled by default,
> + * So it will not buffer any packets.
> + */
> + if (nf->is_default) {
> + nf->enabled = false;
> + }
> if (s->interval) {
> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
> filter_buffer_release_timer, nf);
> @@ -163,6 +179,72 @@ out:
> error_propagate(errp, local_err);
> }
>
> +/*
> +* This will be used by COLO or MC FT, for which they will need
> +* to buffer the packets of VM's net devices, Here we add a default
> +* buffer filter for each netdev. The name of default buffer filter is
> +* 'nop'
> +*/
> +void netdev_add_default_filter_buffer(const char *netdev_id,
> + NetFilterDirection direction,
> + Error **errp)
> +{
Need a more generic way to add an arbitrary filter as default. E.g
during netdev init, query if there's a default and do the initialization
there.
> + QmpOutputVisitor *qov;
> + QmpInputVisitor *qiv;
> + Visitor *ov, *iv;
> + QObject *obj = NULL;
> + QDict *qdict;
> + void *dummy = NULL;
> + const char *id = "nop";
> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
> + NetClientState *nc = qemu_find_netdev(netdev_id);
> + Error *err = NULL;
> +
> + /* FIXME: Not support multiple queues */
> + if (!nc || nc->queue_index > 1) {
> + g_free(queue);
> + return;
> + }
> + /* Not support vhost-net */
> + if (get_vhost_net(nc)) {
> + g_free(queue);
> + return;
> + }
> + qov = qmp_output_visitor_new();
> + ov = qmp_output_get_visitor(qov);
> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
> + if (err) {
> + goto out;
> + }
> + visit_type_str(ov, &nc->name, "netdev", &err);
> + if (err) {
> + goto out;
> + }
> + visit_type_str(ov, &queue, "queue", &err);
> + if (err) {
> + goto out;
> + }
> + visit_end_struct(ov, &err);
> + if (err) {
> + goto out;
> + }
> + obj = qmp_output_get_qobject(qov);
> + g_assert(obj != NULL);
> + qdict = qobject_to_qdict(obj);
> + qmp_output_visitor_cleanup(qov);
> +
> + qiv = qmp_input_visitor_new(obj);
> + iv = qmp_input_get_visitor(qiv);
> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
> + qmp_input_visitor_cleanup(qiv);
> + qobject_decref(obj);
> +out:
> + g_free(queue);
> + if (err) {
> + error_propagate(errp, err);
> + }
> +}
> +
> static void filter_buffer_init(Object *obj)
> {
> object_property_add(obj, "interval", "int",
> diff --git a/net/filter.c b/net/filter.c
> index 1365bad..0b1e408 100644
> --- a/net/filter.c
> +++ b/net/filter.c
> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
> }
>
> nf->netdev = ncs[0];
> -
> + nf->is_default = false;
> + nf->enabled = true;
If we really need something like enabled, need more code for user to
control this bit.
> if (nfc->setup) {
> nfc->setup(nf, &local_err);
> if (local_err) {
> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
> g_free(info);
> }
> object_property_iter_free(iter);
> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
> + g_free(info);
> }
>
> static void netfilter_finalize(Object *obj)
> diff --git a/net/net.c b/net/net.c
> index 87dd356..fd53cfc 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -581,6 +581,10 @@ static ssize_t filter_receive_iov(NetClientState *nc,
> NetFilterState *nf = NULL;
>
> QTAILQ_FOREACH(nf, &nc->filters, next) {
> + /* Don't go through filter if it is off */
> + if (qemu_need_skip_netfilter(nf)) {
> + continue;
> + }
Better move the above to qemu_netfilter_receive()
> ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
> iovcnt, sent_cb);
> if (ret) {
> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
> }
> return -1;
> }
> +
> + if (is_netdev) {
> + const Netdev *netdev = object;
> +
> + netdev_add_default_filter_buffer(netdev->id,
> + NET_FILTER_DIRECTION_RX,
> + errp);
Several issues here:
- Generic code should know nothing about a specific kind of netfilter.
So the default filter should be pointed out by user instead of
hard-coding it like this.
- Need to deal with the netdev hot add. It should still has the default
filter.
> + }
> return 0;
> }
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval zhanghailiang
@ 2016-01-19 3:21 ` Jason Wang
2016-01-19 8:40 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Jason Wang @ 2016-01-19 3:21 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 12/29/2015 03:09 PM, zhanghailiang wrote:
> For default buffer filter, its 'interval' value is zero,
> so here we should accept zero interval.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
> Cc: Jason Wang <jasowang@redhat.com>
> ---
> v12:
> - Add Reviewed-by tag
> v11:
> - Add comment
> v10:
> - new patch
> ---
> net/filter-buffer.c | 10 ----------
> 1 file changed, 10 deletions(-)
>
> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
> index 9cf3544..8abac94 100644
> --- a/net/filter-buffer.c
> +++ b/net/filter-buffer.c
> @@ -111,16 +111,6 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
> FilterBufferState *s = FILTER_BUFFER(nf);
> char *path = object_get_canonical_path_component(OBJECT(nf));
>
> - /*
> - * We may want to accept zero interval when VM FT solutions like MC
> - * or COLO use this filter to release packets on demand.
> - */
You'd better move this to the commit log for a better rationale of the
patch.
> - if (!s->interval) {
> - error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "interval",
> - "a non-zero interval");
> - return;
> - }
> -
> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
> nf->is_default = !strcmp(path, "nop");
> /*
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter zhanghailiang
@ 2016-01-19 3:35 ` Jason Wang
2016-01-19 8:44 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Jason Wang @ 2016-01-19 3:35 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 12/29/2015 03:09 PM, zhanghailiang wrote:
> The default buffer filter doesn't buffer packets in default,
> but we need to buffer packets for COLO or Micro-checkpoint,
> Here we add a helper function to enable/disable filter's buffer
> capability.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v12:
> - Rename the heler function to qemu_set_default_filters_status()
> v11:
> - New patch
> ---
> include/net/filter.h | 1 +
> include/net/net.h | 4 ++++
> net/filter-buffer.c | 19 +++++++++++++++++++
> net/net.c | 29 +++++++++++++++++++++++++++++
> 4 files changed, 53 insertions(+)
>
> diff --git a/include/net/filter.h b/include/net/filter.h
> index 40aa38c..08aa604 100644
> --- a/include/net/filter.h
> +++ b/include/net/filter.h
> @@ -84,4 +84,5 @@ static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
> void netdev_add_default_filter_buffer(const char *netdev_id,
> NetFilterDirection direction,
> Error **errp);
> +void qemu_set_default_filters_status(bool enable);
> #endif /* QEMU_NET_FILTER_H */
> diff --git a/include/net/net.h b/include/net/net.h
> index 7af3e15..5c65c45 100644
> --- a/include/net/net.h
> +++ b/include/net/net.h
> @@ -125,6 +125,10 @@ NetClientState *qemu_find_vlan_client_by_name(Monitor *mon, int vlan_id,
> const char *client_str);
> typedef void (*qemu_nic_foreach)(NICState *nic, void *opaque);
> void qemu_foreach_nic(qemu_nic_foreach func, void *opaque);
> +typedef void (*qemu_netfilter_foreach)(NetFilterState *nf, void *opaque,
> + Error **errp);
> +void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
> + Error **errp);
> int qemu_can_send_packet(NetClientState *nc);
> ssize_t qemu_sendv_packet(NetClientState *nc, const struct iovec *iov,
> int iovcnt);
> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
> index 8abac94..90a50cc 100644
> --- a/net/filter-buffer.c
> +++ b/net/filter-buffer.c
> @@ -169,6 +169,25 @@ out:
> error_propagate(errp, local_err);
> }
>
> +static void set_default_filter_status(NetFilterState *nf,
> + void *opaque,
> + Error **errp)
> +{
> + if (!strcmp(object_get_typename(OBJECT(nf)), TYPE_FILTER_BUFFER)) {
> + bool *status = opaque;
> +
> + if (nf->is_default) {
> + nf->enabled = *status;
> + }
> + }
> +}
> +
> +void qemu_set_default_filters_status(bool enable)
> +{
> + qemu_foreach_netfilter(set_default_filter_status,
> + &enable, NULL);
> +}
The name of the function sounds a generic helper but it in fact pass a
type specific function. Consider enable is a generic property of
netfilter, we want a more generic code here.
> +
> /*
> * This will be used by COLO or MC FT, for which they will need
> * to buffer the packets of VM's net devices, Here we add a default
> diff --git a/net/net.c b/net/net.c
> index fd53cfc..30946c5 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -259,6 +259,35 @@ static char *assign_name(NetClientState *nc1, const char *model)
> return g_strdup_printf("%s.%d", model, id);
> }
>
> +void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
> + Error **errp)
> +{
> + NetClientState *nc;
> + NetFilterState *nf;
> +
> + QTAILQ_FOREACH(nc, &net_clients, next) {
> + if (nc->info->type == NET_CLIENT_OPTIONS_KIND_NIC) {
> + continue;
> + }
> + /* FIXME: Not support multiqueue */
> + if (nc->queue_index > 1) {
> + error_setg(errp, "%s: multiqueue is not supported", __func__);
> + return;
> + }
Do we really need this? Looks like netfilter_complete() has already
checked this.
> + QTAILQ_FOREACH(nf, &nc->filters, next) {
> + if (func) {
> + Error *local_err = NULL;
> +
> + func(nf, opaque, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + return;
> + }
> + }
> + }
> + }
> +}
Need a separate patch for this helper.
> +
> static void qemu_net_client_destructor(NetClientState *nc)
> {
> g_free(nc);
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and release packets
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and " zhanghailiang
@ 2016-01-19 3:59 ` Jason Wang
0 siblings, 0 replies; 63+ messages in thread
From: Jason Wang @ 2016-01-19 3:59 UTC (permalink / raw)
To: zhanghailiang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 12/29/2015 03:09 PM, zhanghailiang wrote:
> Enable default filter to buffer packets and release the
> packets after a checkpoint.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
> ---
> v12:
> - Add a helper function to check if all netdev supports buffer packets.
> - Flush buffered packets when do failover.
> v11:
> - Use new helper functions to buffer and release packets.
> ---
> include/net/net.h | 1 +
> migration/colo.c | 25 ++++++++++++++++++++++++-
> net/net.c | 17 +++++++++++++++++
> 3 files changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/include/net/net.h b/include/net/net.h
> index 5c65c45..2eb9451 100644
> --- a/include/net/net.h
> +++ b/include/net/net.h
> @@ -129,6 +129,7 @@ typedef void (*qemu_netfilter_foreach)(NetFilterState *nf, void *opaque,
> Error **errp);
> void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
> Error **errp);
> +bool qemu_netdev_support_netfilter(void);
> int qemu_can_send_packet(NetClientState *nc);
> ssize_t qemu_sendv_packet(NetClientState *nc, const struct iovec *iov,
> int iovcnt);
> diff --git a/migration/colo.c b/migration/colo.c
> index bd68e86..23e1131 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -18,6 +18,8 @@
> #include "qemu/error-report.h"
> #include "migration/failover.h"
> #include "qapi-event.h"
> +#include "net/filter.h"
> +#include "net/net.h"
>
> static bool vmstate_loading;
>
> @@ -129,6 +131,11 @@ static void primary_vm_do_failover(void)
> old_state);
> return;
> }
> + /* Don't buffer any packets while exited COLO */
> + qemu_set_default_filters_status(false);
> + /* Flush the residuary buffered packts */
> + qemu_release_default_filters_packets();
It's ok to depend on buffer filter explicitly. But the name of above two
functions need to be renamed (since it was rather generic).
> +
> /* Notify COLO thread that failover work is finished */
> qemu_sem_post(&s->colo_sem);
> }
> @@ -335,6 +342,8 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
> goto out;
> }
>
> + qemu_release_default_filters_packets();
> +
> if (colo_shutdown) {
> colo_put_cmd(s->to_dst_file, COLO_COMMAND_GUEST_SHUTDOWN, &local_err);
> if (local_err) {
> @@ -379,6 +388,17 @@ static int colo_prepare_before_save(MigrationState *s)
> return ret;
> }
>
> +static int colo_init_buffer_filters(void)
> +{
> + if (!qemu_netdev_support_netfilter()) {
> + return -EPERM;
> + }
I think colo should fail to be started if any netdev doesn't support
filter. Instead of failing in the middle.
> + /* Begin to buffer packets that sent by VM */
> + qemu_set_default_filters_status(true);
> +
> + return 0;
> +}
> +
> static void colo_process_checkpoint(MigrationState *s)
> {
> QEMUSizedBuffer *buffer = NULL;
> @@ -387,7 +407,10 @@ static void colo_process_checkpoint(MigrationState *s)
> int ret;
>
> failover_init_state();
> -
> + ret = colo_init_buffer_filters();
> + if (ret < 0) {
> + goto out;
> + }
> s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
> if (!s->rp_state.from_dst_file) {
> error_report("Open QEMUFile from_dst_file failed");
> diff --git a/net/net.c b/net/net.c
> index 30946c5..4678a6e 100644
> --- a/net/net.c
> +++ b/net/net.c
> @@ -288,6 +288,23 @@ void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
> }
> }
>
> +bool qemu_netdev_support_netfilter(void)
> +{
> + NetClientState *nc;
> +
> + QTAILQ_FOREACH(nc, &net_clients, next) {
> + if (nc->info->type == NET_CLIENT_OPTIONS_KIND_NIC) {
> + continue;
> + }
> + if (QTAILQ_EMPTY(&nc->filters)) {
> + error_report("netdev (%s) does not support filter", nc->name);
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> static void qemu_net_client_destructor(NetClientState *nc)
> {
> g_free(nc);
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-19 3:19 ` Jason Wang
@ 2016-01-19 8:39 ` Hailiang Zhang
2016-01-20 2:39 ` Jason Wang
0 siblings, 1 reply; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-19 8:39 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
Hi Jason,
Thanks for your review.
On 2016/1/19 11:19, Jason Wang wrote:
>
>
> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>> We add each netdev (except vhost-net) a default filter-buffer,
>> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
>> The name of default filter-buffer is 'nop'.
>> For the default filter-buffer, it will not buffer any packets in default.
>> So it has no side effect for the netdev.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>
> This patch did three things:
>
> 1) the ability to enable or disable a netfilter
> 2) the ability to add a default filter
> 3) default filter attaching for filter-buffer
>
> Better to split them into separate small patches.
>
> And several questions:
>
> For 1), I'm not sure this is real needed, we can in fact disable a
> filter by removing it.
If we do like this, do we also need to _enable_ the buffer filter by
add it dynamically instead of attaching the default filter ?
Just like what we do in V10 ?
(In that series, you think have a default filter may be better.
The main reason for that is to support
hot-add nic. Since we didn't support hot-add nic during COLO,
it will be OK to add default filter dynamically)
> For 2), Instead of a specific code just for filter buffer, I think we
> need a generic method for an arbitrary filter to be used as default.
Good idea.
> And if we can achieve 2), 3) is not needed any more.
>
>> ---
>> v12:
>> - Skip vhost-net when add default filter
>> - Don't go through filter layer if the filter is disabled.
>> v11:
>> - New patch
>> ---
>> include/net/filter.h | 10 +++++++
>> net/filter-buffer.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>> net/filter.c | 6 +++-
>> net/net.c | 12 ++++++++
>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/net/filter.h b/include/net/filter.h
>> index 2deda36..40aa38c 100644
>> --- a/include/net/filter.h
>> +++ b/include/net/filter.h
>> @@ -56,6 +56,8 @@ struct NetFilterState {
>> NetClientState *netdev;
>> NetFilterDirection direction;
>> char info_str[256];
>> + bool is_default;
>> + bool enabled;
>> QTAILQ_ENTRY(NetFilterState) next;
>> };
>>
>> @@ -74,4 +76,12 @@ ssize_t qemu_netfilter_pass_to_next(NetClientState *sender,
>> int iovcnt,
>> void *opaque);
>>
>> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
>> +{
>> + return nf->enabled ? false : true;
>> +}
>> +
>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>> + NetFilterDirection direction,
>> + Error **errp);
>> #endif /* QEMU_NET_FILTER_H */
>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>> index 57be149..9cf3544 100644
>> --- a/net/filter-buffer.c
>> +++ b/net/filter-buffer.c
>> @@ -14,6 +14,13 @@
>> #include "qapi/qmp/qerror.h"
>> #include "qapi-visit.h"
>> #include "qom/object.h"
>> +#include "net/net.h"
>> +#include "qapi/qmp/qdict.h"
>> +#include "qapi/qmp-output-visitor.h"
>> +#include "qapi/qmp-input-visitor.h"
>> +#include "monitor/monitor.h"
>> +#include "qmp-commands.h"
>> +#include "net/vhost_net.h"
>>
>> #define TYPE_FILTER_BUFFER "filter-buffer"
>>
>> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState *nf)
>> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>> {
>> FilterBufferState *s = FILTER_BUFFER(nf);
>> + char *path = object_get_canonical_path_component(OBJECT(nf));
>>
>> /*
>> * We may want to accept zero interval when VM FT solutions like MC
>> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>> }
>>
>> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
>> + nf->is_default = !strcmp(path, "nop");
>> + /*
>> + * For the default buffer filter, it will be disabled by default,
>> + * So it will not buffer any packets.
>> + */
>> + if (nf->is_default) {
>> + nf->enabled = false;
>> + }
>> if (s->interval) {
>> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
>> filter_buffer_release_timer, nf);
>> @@ -163,6 +179,72 @@ out:
>> error_propagate(errp, local_err);
>> }
>>
>> +/*
>> +* This will be used by COLO or MC FT, for which they will need
>> +* to buffer the packets of VM's net devices, Here we add a default
>> +* buffer filter for each netdev. The name of default buffer filter is
>> +* 'nop'
>> +*/
>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>> + NetFilterDirection direction,
>> + Error **errp)
>> +{
>
> Need a more generic way to add an arbitrary filter as default. E.g
> during netdev init, query if there's a default and do the initialization
> there.
>
We call it in net_client_init1(), i don't find a better place to call it,
what's your suggestion ?
>> + QmpOutputVisitor *qov;
>> + QmpInputVisitor *qiv;
>> + Visitor *ov, *iv;
>> + QObject *obj = NULL;
>> + QDict *qdict;
>> + void *dummy = NULL;
>> + const char *id = "nop";
>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>> + Error *err = NULL;
>> +
>> + /* FIXME: Not support multiple queues */
>> + if (!nc || nc->queue_index > 1) {
>> + g_free(queue);
>> + return;
>> + }
>> + /* Not support vhost-net */
>> + if (get_vhost_net(nc)) {
>> + g_free(queue);
>> + return;
>> + }
>> + qov = qmp_output_visitor_new();
>> + ov = qmp_output_get_visitor(qov);
>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_type_str(ov, &nc->name, "netdev", &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_type_str(ov, &queue, "queue", &err);
>> + if (err) {
>> + goto out;
>> + }
>> + visit_end_struct(ov, &err);
>> + if (err) {
>> + goto out;
>> + }
>> + obj = qmp_output_get_qobject(qov);
>> + g_assert(obj != NULL);
>> + qdict = qobject_to_qdict(obj);
>> + qmp_output_visitor_cleanup(qov);
>> +
>> + qiv = qmp_input_visitor_new(obj);
>> + iv = qmp_input_get_visitor(qiv);
>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>> + qmp_input_visitor_cleanup(qiv);
>> + qobject_decref(obj);
>> +out:
>> + g_free(queue);
>> + if (err) {
>> + error_propagate(errp, err);
>> + }
>> +}
>> +
>> static void filter_buffer_init(Object *obj)
>> {
>> object_property_add(obj, "interval", "int",
>> diff --git a/net/filter.c b/net/filter.c
>> index 1365bad..0b1e408 100644
>> --- a/net/filter.c
>> +++ b/net/filter.c
>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
>> }
>>
>> nf->netdev = ncs[0];
>> -
>> + nf->is_default = false;
>> + nf->enabled = true;
>
> If we really need something like enabled, need more code for user to
> control this bit.
>
OK, i will fix it.
>> if (nfc->setup) {
>> nfc->setup(nf, &local_err);
>> if (local_err) {
>> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable *uc, Error **errp)
>> g_free(info);
>> }
>> object_property_iter_free(iter);
>> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
>> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
>> + g_free(info);
>> }
>>
>> static void netfilter_finalize(Object *obj)
>> diff --git a/net/net.c b/net/net.c
>> index 87dd356..fd53cfc 100644
>> --- a/net/net.c
>> +++ b/net/net.c
>> @@ -581,6 +581,10 @@ static ssize_t filter_receive_iov(NetClientState *nc,
>> NetFilterState *nf = NULL;
>>
>> QTAILQ_FOREACH(nf, &nc->filters, next) {
>> + /* Don't go through filter if it is off */
>> + if (qemu_need_skip_netfilter(nf)) {
>> + continue;
>> + }
>
> Better move the above to qemu_netfilter_receive()
>
OK.
>> ret = qemu_netfilter_receive(nf, direction, sender, flags, iov,
>> iovcnt, sent_cb);
>> if (ret) {
>> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void *object, int is_netdev, Error **errp)
>> }
>> return -1;
>> }
>> +
>> + if (is_netdev) {
>> + const Netdev *netdev = object;
>> +
>> + netdev_add_default_filter_buffer(netdev->id,
>> + NET_FILTER_DIRECTION_RX,
>> + errp);
>
> Several issues here:
>
> - Generic code should know nothing about a specific kind of netfilter.
> So the default filter should be pointed out by user instead of
> hard-coding it like this.
> - Need to deal with the netdev hot add. It should still has the default
> filter.
>
OK, then, here just answer my above question, we still need to add the default filter,
so we still need the ability to enable or disable a netfilter. :)
Thanks,
Hailiang
>> + }
>> return 0;
>> }
>>
>
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval
2016-01-19 3:21 ` Jason Wang
@ 2016-01-19 8:40 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-19 8:40 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, dgilbert, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 2016/1/19 11:21, Jason Wang wrote:
>
>
> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>> For default buffer filter, its 'interval' value is zero,
>> so here we should accept zero interval.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
>> Cc: Jason Wang <jasowang@redhat.com>
>> ---
>> v12:
>> - Add Reviewed-by tag
>> v11:
>> - Add comment
>> v10:
>> - new patch
>> ---
>> net/filter-buffer.c | 10 ----------
>> 1 file changed, 10 deletions(-)
>>
>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>> index 9cf3544..8abac94 100644
>> --- a/net/filter-buffer.c
>> +++ b/net/filter-buffer.c
>> @@ -111,16 +111,6 @@ static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>> FilterBufferState *s = FILTER_BUFFER(nf);
>> char *path = object_get_canonical_path_component(OBJECT(nf));
>>
>> - /*
>> - * We may want to accept zero interval when VM FT solutions like MC
>> - * or COLO use this filter to release packets on demand.
>> - */
>
> You'd better move this to the commit log for a better rationale of the
> patch.
>
OK, i will fix it, thanks.
>> - if (!s->interval) {
>> - error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "interval",
>> - "a non-zero interval");
>> - return;
>> - }
>> -
>> s->incoming_queue = qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
>> nf->is_default = !strcmp(path, "nop");
>> /*
>
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter
2016-01-19 3:35 ` Jason Wang
@ 2016-01-19 8:44 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-19 8:44 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 2016/1/19 11:35, Jason Wang wrote:
>
>
> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>> The default buffer filter doesn't buffer packets in default,
>> but we need to buffer packets for COLO or Micro-checkpoint,
>> Here we add a helper function to enable/disable filter's buffer
>> capability.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Cc: Jason Wang <jasowang@redhat.com>
>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>> ---
>> v12:
>> - Rename the heler function to qemu_set_default_filters_status()
>> v11:
>> - New patch
>> ---
>> include/net/filter.h | 1 +
>> include/net/net.h | 4 ++++
>> net/filter-buffer.c | 19 +++++++++++++++++++
>> net/net.c | 29 +++++++++++++++++++++++++++++
>> 4 files changed, 53 insertions(+)
>>
>> diff --git a/include/net/filter.h b/include/net/filter.h
>> index 40aa38c..08aa604 100644
>> --- a/include/net/filter.h
>> +++ b/include/net/filter.h
>> @@ -84,4 +84,5 @@ static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
>> void netdev_add_default_filter_buffer(const char *netdev_id,
>> NetFilterDirection direction,
>> Error **errp);
>> +void qemu_set_default_filters_status(bool enable);
>> #endif /* QEMU_NET_FILTER_H */
>> diff --git a/include/net/net.h b/include/net/net.h
>> index 7af3e15..5c65c45 100644
>> --- a/include/net/net.h
>> +++ b/include/net/net.h
>> @@ -125,6 +125,10 @@ NetClientState *qemu_find_vlan_client_by_name(Monitor *mon, int vlan_id,
>> const char *client_str);
>> typedef void (*qemu_nic_foreach)(NICState *nic, void *opaque);
>> void qemu_foreach_nic(qemu_nic_foreach func, void *opaque);
>> +typedef void (*qemu_netfilter_foreach)(NetFilterState *nf, void *opaque,
>> + Error **errp);
>> +void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
>> + Error **errp);
>> int qemu_can_send_packet(NetClientState *nc);
>> ssize_t qemu_sendv_packet(NetClientState *nc, const struct iovec *iov,
>> int iovcnt);
>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>> index 8abac94..90a50cc 100644
>> --- a/net/filter-buffer.c
>> +++ b/net/filter-buffer.c
>> @@ -169,6 +169,25 @@ out:
>> error_propagate(errp, local_err);
>> }
>>
>> +static void set_default_filter_status(NetFilterState *nf,
>> + void *opaque,
>> + Error **errp)
>> +{
>> + if (!strcmp(object_get_typename(OBJECT(nf)), TYPE_FILTER_BUFFER)) {
>> + bool *status = opaque;
>> +
>> + if (nf->is_default) {
>> + nf->enabled = *status;
>> + }
>> + }
>> +}
>> +
>> +void qemu_set_default_filters_status(bool enable)
>> +{
>> + qemu_foreach_netfilter(set_default_filter_status,
>> + &enable, NULL);
>> +}
>
> The name of the function sounds a generic helper but it in fact pass a
> type specific function. Consider enable is a generic property of
> netfilter, we want a more generic code here.
>
Got it, i will fix it.
>> +
>> /*
>> * This will be used by COLO or MC FT, for which they will need
>> * to buffer the packets of VM's net devices, Here we add a default
>> diff --git a/net/net.c b/net/net.c
>> index fd53cfc..30946c5 100644
>> --- a/net/net.c
>> +++ b/net/net.c
>> @@ -259,6 +259,35 @@ static char *assign_name(NetClientState *nc1, const char *model)
>> return g_strdup_printf("%s.%d", model, id);
>> }
>>
>> +void qemu_foreach_netfilter(qemu_netfilter_foreach func, void *opaque,
>> + Error **errp)
>> +{
>> + NetClientState *nc;
>> + NetFilterState *nf;
>> +
>> + QTAILQ_FOREACH(nc, &net_clients, next) {
>> + if (nc->info->type == NET_CLIENT_OPTIONS_KIND_NIC) {
>> + continue;
>> + }
>> + /* FIXME: Not support multiqueue */
>> + if (nc->queue_index > 1) {
>> + error_setg(errp, "%s: multiqueue is not supported", __func__);
>> + return;
>> + }
>
> Do we really need this? Looks like netfilter_complete() has already
> checked this.
>
Yes, this is useless, i will remove it.
>> + QTAILQ_FOREACH(nf, &nc->filters, next) {
>> + if (func) {
>> + Error *local_err = NULL;
>> +
>> + func(nf, opaque, &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> + return;
>> + }
>> + }
>> + }
>> + }
>> +}
>
> Need a separate patch for this helper.
>
OK, i will split it in next version, thanks.
>> +
>> static void qemu_net_client_destructor(NetClientState *nc)
>> {
>> g_free(nc);
>
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-19 8:39 ` Hailiang Zhang
@ 2016-01-20 2:39 ` Jason Wang
2016-01-20 7:14 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Jason Wang @ 2016-01-20 2:39 UTC (permalink / raw)
To: Hailiang Zhang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 01/19/2016 04:39 PM, Hailiang Zhang wrote:
> Hi Jason,
>
> Thanks for your review.
>
> On 2016/1/19 11:19, Jason Wang wrote:
>>
>>
>> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>>> We add each netdev (except vhost-net) a default filter-buffer,
>>> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
>>> The name of default filter-buffer is 'nop'.
>>> For the default filter-buffer, it will not buffer any packets in
>>> default.
>>> So it has no side effect for the netdev.
>>>
>>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>>> Cc: Jason Wang <jasowang@redhat.com>
>>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>>
>> This patch did three things:
>>
>> 1) the ability to enable or disable a netfilter
>> 2) the ability to add a default filter
>> 3) default filter attaching for filter-buffer
>>
>> Better to split them into separate small patches.
>>
>> And several questions:
>>
>> For 1), I'm not sure this is real needed, we can in fact disable a
>> filter by removing it.
>
> If we do like this, do we also need to _enable_ the buffer filter by
> add it dynamically instead of attaching the default filter ?
> Just like what we do in V10 ?
> (In that series, you think have a default filter may be better.
> The main reason for that is to support
> hot-add nic. Since we didn't support hot-add nic during COLO,
> it will be OK to add default filter dynamically)
Aha, right. So rethinking of this, enabling/disabling a filter looks ok
to me.
>
>> For 2), Instead of a specific code just for filter buffer, I think we
>> need a generic method for an arbitrary filter to be used as default.
>
> Good idea.
>
>> And if we can achieve 2), 3) is not needed any more.
>>
>>> ---
>>> v12:
>>> - Skip vhost-net when add default filter
>>> - Don't go through filter layer if the filter is disabled.
>>> v11:
>>> - New patch
>>> ---
>>> include/net/filter.h | 10 +++++++
>>> net/filter-buffer.c | 82
>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> net/filter.c | 6 +++-
>>> net/net.c | 12 ++++++++
>>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/include/net/filter.h b/include/net/filter.h
>>> index 2deda36..40aa38c 100644
>>> --- a/include/net/filter.h
>>> +++ b/include/net/filter.h
>>> @@ -56,6 +56,8 @@ struct NetFilterState {
>>> NetClientState *netdev;
>>> NetFilterDirection direction;
>>> char info_str[256];
>>> + bool is_default;
>>> + bool enabled;
>>> QTAILQ_ENTRY(NetFilterState) next;
>>> };
>>>
>>> @@ -74,4 +76,12 @@ ssize_t
>>> qemu_netfilter_pass_to_next(NetClientState *sender,
>>> int iovcnt,
>>> void *opaque);
>>>
>>> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
>>> +{
>>> + return nf->enabled ? false : true;
>>> +}
>>> +
>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>> + NetFilterDirection direction,
>>> + Error **errp);
>>> #endif /* QEMU_NET_FILTER_H */
>>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>>> index 57be149..9cf3544 100644
>>> --- a/net/filter-buffer.c
>>> +++ b/net/filter-buffer.c
>>> @@ -14,6 +14,13 @@
>>> #include "qapi/qmp/qerror.h"
>>> #include "qapi-visit.h"
>>> #include "qom/object.h"
>>> +#include "net/net.h"
>>> +#include "qapi/qmp/qdict.h"
>>> +#include "qapi/qmp-output-visitor.h"
>>> +#include "qapi/qmp-input-visitor.h"
>>> +#include "monitor/monitor.h"
>>> +#include "qmp-commands.h"
>>> +#include "net/vhost_net.h"
>>>
>>> #define TYPE_FILTER_BUFFER "filter-buffer"
>>>
>>> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState
>>> *nf)
>>> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>>> {
>>> FilterBufferState *s = FILTER_BUFFER(nf);
>>> + char *path = object_get_canonical_path_component(OBJECT(nf));
>>>
>>> /*
>>> * We may want to accept zero interval when VM FT solutions
>>> like MC
>>> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState
>>> *nf, Error **errp)
>>> }
>>>
>>> s->incoming_queue =
>>> qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
>>> + nf->is_default = !strcmp(path, "nop");
>>> + /*
>>> + * For the default buffer filter, it will be disabled by default,
>>> + * So it will not buffer any packets.
>>> + */
>>> + if (nf->is_default) {
>>> + nf->enabled = false;
>>> + }
>>> if (s->interval) {
>>> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
>>> filter_buffer_release_timer, nf);
>>> @@ -163,6 +179,72 @@ out:
>>> error_propagate(errp, local_err);
>>> }
>>>
>>> +/*
>>> +* This will be used by COLO or MC FT, for which they will need
>>> +* to buffer the packets of VM's net devices, Here we add a default
>>> +* buffer filter for each netdev. The name of default buffer filter is
>>> +* 'nop'
>>> +*/
>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>> + NetFilterDirection direction,
>>> + Error **errp)
>>> +{
>>
>> Need a more generic way to add an arbitrary filter as default. E.g
>> during netdev init, query if there's a default and do the initialization
>> there.
>>
>
> We call it in net_client_init1(), i don't find a better place to call it,
> what's your suggestion ?
net_client_init1() is ok, just need a generic way. E.g a string which
stores the default filter and its parameters which could be queried by
default filter initialization function.
>
>>> + QmpOutputVisitor *qov;
>>> + QmpInputVisitor *qiv;
>>> + Visitor *ov, *iv;
>>> + QObject *obj = NULL;
>>> + QDict *qdict;
>>> + void *dummy = NULL;
>>> + const char *id = "nop";
>>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>>> + Error *err = NULL;
>>> +
>>> + /* FIXME: Not support multiple queues */
>>> + if (!nc || nc->queue_index > 1) {
>>> + g_free(queue);
>>> + return;
>>> + }
>>> + /* Not support vhost-net */
>>> + if (get_vhost_net(nc)) {
>>> + g_free(queue);
>>> + return;
>>> + }
>>> + qov = qmp_output_visitor_new();
>>> + ov = qmp_output_get_visitor(qov);
>>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>>> + if (err) {
>>> + goto out;
>>> + }
>>> + visit_type_str(ov, &nc->name, "netdev", &err);
>>> + if (err) {
>>> + goto out;
>>> + }
>>> + visit_type_str(ov, &queue, "queue", &err);
>>> + if (err) {
>>> + goto out;
>>> + }
>>> + visit_end_struct(ov, &err);
>>> + if (err) {
>>> + goto out;
>>> + }
>>> + obj = qmp_output_get_qobject(qov);
>>> + g_assert(obj != NULL);
>>> + qdict = qobject_to_qdict(obj);
>>> + qmp_output_visitor_cleanup(qov);
>>> +
>>> + qiv = qmp_input_visitor_new(obj);
>>> + iv = qmp_input_get_visitor(qiv);
>>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>>> + qmp_input_visitor_cleanup(qiv);
>>> + qobject_decref(obj);
>>> +out:
>>> + g_free(queue);
>>> + if (err) {
>>> + error_propagate(errp, err);
>>> + }
>>> +}
>>> +
>>> static void filter_buffer_init(Object *obj)
>>> {
>>> object_property_add(obj, "interval", "int",
>>> diff --git a/net/filter.c b/net/filter.c
>>> index 1365bad..0b1e408 100644
>>> --- a/net/filter.c
>>> +++ b/net/filter.c
>>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable
>>> *uc, Error **errp)
>>> }
>>>
>>> nf->netdev = ncs[0];
>>> -
>>> + nf->is_default = false;
>>> + nf->enabled = true;
>>
>> If we really need something like enabled, need more code for user to
>> control this bit.
>>
>
> OK, i will fix it.
Or if you want to minimize the change set. You can make something like
enabled locally to filter buffer, and let it to be used by colo only.
>
>>> if (nfc->setup) {
>>> nfc->setup(nf, &local_err);
>>> if (local_err) {
>>> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable
>>> *uc, Error **errp)
>>> g_free(info);
>>> }
>>> object_property_iter_free(iter);
>>> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
>>> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
>>> + g_free(info);
>>> }
>>>
>>> static void netfilter_finalize(Object *obj)
>>> diff --git a/net/net.c b/net/net.c
>>> index 87dd356..fd53cfc 100644
>>> --- a/net/net.c
>>> +++ b/net/net.c
>>> @@ -581,6 +581,10 @@ static ssize_t
>>> filter_receive_iov(NetClientState *nc,
>>> NetFilterState *nf = NULL;
>>>
>>> QTAILQ_FOREACH(nf, &nc->filters, next) {
>>> + /* Don't go through filter if it is off */
>>> + if (qemu_need_skip_netfilter(nf)) {
>>> + continue;
>>> + }
>>
>> Better move the above to qemu_netfilter_receive()
>>
>
> OK.
>
>>> ret = qemu_netfilter_receive(nf, direction, sender, flags,
>>> iov,
>>> iovcnt, sent_cb);
>>> if (ret) {
>>> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void
>>> *object, int is_netdev, Error **errp)
>>> }
>>> return -1;
>>> }
>>> +
>>> + if (is_netdev) {
>>> + const Netdev *netdev = object;
>>> +
>>> + netdev_add_default_filter_buffer(netdev->id,
>>> + NET_FILTER_DIRECTION_RX,
>>> + errp);
>>
>> Several issues here:
>>
>> - Generic code should know nothing about a specific kind of netfilter.
>> So the default filter should be pointed out by user instead of
>> hard-coding it like this.
>> - Need to deal with the netdev hot add. It should still has the default
>> filter.
>>
>
> OK, then, here just answer my above question, we still need to add the
> default filter,
> so we still need the ability to enable or disable a netfilter. :)
Right. So the issue is just to have a way to let an arbitrary filter to
be default :).
Thanks
>
> Thanks,
> Hailiang
>
>>> + }
>>> return 0;
>>> }
>>>
>>
>>
>> .
>>
>
>
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-20 2:39 ` Jason Wang
@ 2016-01-20 7:14 ` Hailiang Zhang
2016-01-20 9:15 ` Jason Wang
0 siblings, 1 reply; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-20 7:14 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 2016/1/20 10:39, Jason Wang wrote:
>
>
> On 01/19/2016 04:39 PM, Hailiang Zhang wrote:
>> Hi Jason,
>>
>> Thanks for your review.
>>
>> On 2016/1/19 11:19, Jason Wang wrote:
>>>
>>>
>>> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>>>> We add each netdev (except vhost-net) a default filter-buffer,
>>>> which will be used for COLO or Micro-checkpoint to buffer VM's packets.
>>>> The name of default filter-buffer is 'nop'.
>>>> For the default filter-buffer, it will not buffer any packets in
>>>> default.
>>>> So it has no side effect for the netdev.
>>>>
>>>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>>>> Cc: Jason Wang <jasowang@redhat.com>
>>>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>>>
>>> This patch did three things:
>>>
>>> 1) the ability to enable or disable a netfilter
>>> 2) the ability to add a default filter
>>> 3) default filter attaching for filter-buffer
>>>
>>> Better to split them into separate small patches.
>>>
>>> And several questions:
>>>
>>> For 1), I'm not sure this is real needed, we can in fact disable a
>>> filter by removing it.
>>
>> If we do like this, do we also need to _enable_ the buffer filter by
>> add it dynamically instead of attaching the default filter ?
>> Just like what we do in V10 ?
>> (In that series, you think have a default filter may be better.
>> The main reason for that is to support
>> hot-add nic. Since we didn't support hot-add nic during COLO,
>> it will be OK to add default filter dynamically)
>
> Aha, right. So rethinking of this, enabling/disabling a filter looks ok
> to me.
>
>>
>>> For 2), Instead of a specific code just for filter buffer, I think we
>>> need a generic method for an arbitrary filter to be used as default.
>>
>> Good idea.
>>
>>> And if we can achieve 2), 3) is not needed any more.
>>>
>>>> ---
>>>> v12:
>>>> - Skip vhost-net when add default filter
>>>> - Don't go through filter layer if the filter is disabled.
>>>> v11:
>>>> - New patch
>>>> ---
>>>> include/net/filter.h | 10 +++++++
>>>> net/filter-buffer.c | 82
>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>> net/filter.c | 6 +++-
>>>> net/net.c | 12 ++++++++
>>>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/include/net/filter.h b/include/net/filter.h
>>>> index 2deda36..40aa38c 100644
>>>> --- a/include/net/filter.h
>>>> +++ b/include/net/filter.h
>>>> @@ -56,6 +56,8 @@ struct NetFilterState {
>>>> NetClientState *netdev;
>>>> NetFilterDirection direction;
>>>> char info_str[256];
>>>> + bool is_default;
>>>> + bool enabled;
>>>> QTAILQ_ENTRY(NetFilterState) next;
>>>> };
>>>>
>>>> @@ -74,4 +76,12 @@ ssize_t
>>>> qemu_netfilter_pass_to_next(NetClientState *sender,
>>>> int iovcnt,
>>>> void *opaque);
>>>>
>>>> +static inline bool qemu_need_skip_netfilter(NetFilterState *nf)
>>>> +{
>>>> + return nf->enabled ? false : true;
>>>> +}
>>>> +
>>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>>> + NetFilterDirection direction,
>>>> + Error **errp);
>>>> #endif /* QEMU_NET_FILTER_H */
>>>> diff --git a/net/filter-buffer.c b/net/filter-buffer.c
>>>> index 57be149..9cf3544 100644
>>>> --- a/net/filter-buffer.c
>>>> +++ b/net/filter-buffer.c
>>>> @@ -14,6 +14,13 @@
>>>> #include "qapi/qmp/qerror.h"
>>>> #include "qapi-visit.h"
>>>> #include "qom/object.h"
>>>> +#include "net/net.h"
>>>> +#include "qapi/qmp/qdict.h"
>>>> +#include "qapi/qmp-output-visitor.h"
>>>> +#include "qapi/qmp-input-visitor.h"
>>>> +#include "monitor/monitor.h"
>>>> +#include "qmp-commands.h"
>>>> +#include "net/vhost_net.h"
>>>>
>>>> #define TYPE_FILTER_BUFFER "filter-buffer"
>>>>
>>>> @@ -102,6 +109,7 @@ static void filter_buffer_cleanup(NetFilterState
>>>> *nf)
>>>> static void filter_buffer_setup(NetFilterState *nf, Error **errp)
>>>> {
>>>> FilterBufferState *s = FILTER_BUFFER(nf);
>>>> + char *path = object_get_canonical_path_component(OBJECT(nf));
>>>>
>>>> /*
>>>> * We may want to accept zero interval when VM FT solutions
>>>> like MC
>>>> @@ -114,6 +122,14 @@ static void filter_buffer_setup(NetFilterState
>>>> *nf, Error **errp)
>>>> }
>>>>
>>>> s->incoming_queue =
>>>> qemu_new_net_queue(qemu_netfilter_pass_to_next, nf);
>>>> + nf->is_default = !strcmp(path, "nop");
>>>> + /*
>>>> + * For the default buffer filter, it will be disabled by default,
>>>> + * So it will not buffer any packets.
>>>> + */
>>>> + if (nf->is_default) {
>>>> + nf->enabled = false;
>>>> + }
>>>> if (s->interval) {
>>>> timer_init_us(&s->release_timer, QEMU_CLOCK_VIRTUAL,
>>>> filter_buffer_release_timer, nf);
>>>> @@ -163,6 +179,72 @@ out:
>>>> error_propagate(errp, local_err);
>>>> }
>>>>
>>>> +/*
>>>> +* This will be used by COLO or MC FT, for which they will need
>>>> +* to buffer the packets of VM's net devices, Here we add a default
>>>> +* buffer filter for each netdev. The name of default buffer filter is
>>>> +* 'nop'
>>>> +*/
>>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>>> + NetFilterDirection direction,
>>>> + Error **errp)
>>>> +{
>>>
>>> Need a more generic way to add an arbitrary filter as default. E.g
>>> during netdev init, query if there's a default and do the initialization
>>> there.
>>>
>>
>> We call it in net_client_init1(), i don't find a better place to call it,
>> what's your suggestion ?
>
> net_client_init1() is ok, just need a generic way. E.g a string which
> stores the default filter and its parameters which could be queried by
> default filter initialization function.
>
Hmm, i'm still confused about how to realize this, do you mean change this helper
to a more generic function ? Just like :
void netdev_add_filter(const char *netdev_id,
const char *filter_type, char *id,
Error **errp)
Could you please give me more detail about how to realize it ? :)
>>
>>>> + QmpOutputVisitor *qov;
>>>> + QmpInputVisitor *qiv;
>>>> + Visitor *ov, *iv;
>>>> + QObject *obj = NULL;
>>>> + QDict *qdict;
>>>> + void *dummy = NULL;
>>>> + const char *id = "nop";
>>>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>>>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>>>> + Error *err = NULL;
>>>> +
>>>> + /* FIXME: Not support multiple queues */
>>>> + if (!nc || nc->queue_index > 1) {
>>>> + g_free(queue);
>>>> + return;
>>>> + }
>>>> + /* Not support vhost-net */
>>>> + if (get_vhost_net(nc)) {
>>>> + g_free(queue);
>>>> + return;
>>>> + }
>>>> + qov = qmp_output_visitor_new();
>>>> + ov = qmp_output_get_visitor(qov);
>>>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>>>> + if (err) {
>>>> + goto out;
>>>> + }
>>>> + visit_type_str(ov, &nc->name, "netdev", &err);
>>>> + if (err) {
>>>> + goto out;
>>>> + }
>>>> + visit_type_str(ov, &queue, "queue", &err);
>>>> + if (err) {
>>>> + goto out;
>>>> + }
>>>> + visit_end_struct(ov, &err);
>>>> + if (err) {
>>>> + goto out;
>>>> + }
>>>> + obj = qmp_output_get_qobject(qov);
>>>> + g_assert(obj != NULL);
>>>> + qdict = qobject_to_qdict(obj);
>>>> + qmp_output_visitor_cleanup(qov);
>>>> +
>>>> + qiv = qmp_input_visitor_new(obj);
>>>> + iv = qmp_input_get_visitor(qiv);
>>>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>>>> + qmp_input_visitor_cleanup(qiv);
>>>> + qobject_decref(obj);
>>>> +out:
>>>> + g_free(queue);
>>>> + if (err) {
>>>> + error_propagate(errp, err);
>>>> + }
>>>> +}
>>>> +
>>>> static void filter_buffer_init(Object *obj)
>>>> {
>>>> object_property_add(obj, "interval", "int",
>>>> diff --git a/net/filter.c b/net/filter.c
>>>> index 1365bad..0b1e408 100644
>>>> --- a/net/filter.c
>>>> +++ b/net/filter.c
>>>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable
>>>> *uc, Error **errp)
>>>> }
>>>>
>>>> nf->netdev = ncs[0];
>>>> -
>>>> + nf->is_default = false;
>>>> + nf->enabled = true;
>>>
>>> If we really need something like enabled, need more code for user to
>>> control this bit.
>>>
>>
>> OK, i will fix it.
>
> Or if you want to minimize the change set. You can make something like
> enabled locally to filter buffer, and let it to be used by colo only.
>
I have convert it to use object property to set/get the value, is that OK ?
Thanks,
Hailiang
>>
>>>> if (nfc->setup) {
>>>> nfc->setup(nf, &local_err);
>>>> if (local_err) {
>>>> @@ -190,6 +191,9 @@ static void netfilter_complete(UserCreatable
>>>> *uc, Error **errp)
>>>> g_free(info);
>>>> }
>>>> object_property_iter_free(iter);
>>>> + info = g_strdup_printf(",status=%s", nf->enabled ? "on" : "off");
>>>> + g_strlcat(nf->info_str, info, sizeof(nf->info_str));
>>>> + g_free(info);
>>>> }
>>>>
>>>> static void netfilter_finalize(Object *obj)
>>>> diff --git a/net/net.c b/net/net.c
>>>> index 87dd356..fd53cfc 100644
>>>> --- a/net/net.c
>>>> +++ b/net/net.c
>>>> @@ -581,6 +581,10 @@ static ssize_t
>>>> filter_receive_iov(NetClientState *nc,
>>>> NetFilterState *nf = NULL;
>>>>
>>>> QTAILQ_FOREACH(nf, &nc->filters, next) {
>>>> + /* Don't go through filter if it is off */
>>>> + if (qemu_need_skip_netfilter(nf)) {
>>>> + continue;
>>>> + }
>>>
>>> Better move the above to qemu_netfilter_receive()
>>>
>>
>> OK.
>>
>>>> ret = qemu_netfilter_receive(nf, direction, sender, flags,
>>>> iov,
>>>> iovcnt, sent_cb);
>>>> if (ret) {
>>>> @@ -1028,6 +1032,14 @@ static int net_client_init1(const void
>>>> *object, int is_netdev, Error **errp)
>>>> }
>>>> return -1;
>>>> }
>>>> +
>>>> + if (is_netdev) {
>>>> + const Netdev *netdev = object;
>>>> +
>>>> + netdev_add_default_filter_buffer(netdev->id,
>>>> + NET_FILTER_DIRECTION_RX,
>>>> + errp);
>>>
>>> Several issues here:
>>>
>>> - Generic code should know nothing about a specific kind of netfilter.
>>> So the default filter should be pointed out by user instead of
>>> hard-coding it like this.
>>> - Need to deal with the netdev hot add. It should still has the default
>>> filter.
>>>
>>
>> OK, then, here just answer my above question, we still need to add the
>> default filter,
>> so we still need the ability to enable or disable a netfilter. :)
>
> Right. So the issue is just to have a way to let an arbitrary filter to
> be default :).
>
> Thanks
>
>>
>> Thanks,
>> Hailiang
>>
>>>> + }
>>>> return 0;
>>>> }
>>>>
>>>
>>>
>>> .
>>>
>>
>>
>>
>
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-20 7:14 ` Hailiang Zhang
@ 2016-01-20 9:15 ` Jason Wang
2016-01-20 9:27 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Jason Wang @ 2016-01-20 9:15 UTC (permalink / raw)
To: Hailiang Zhang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 01/20/2016 03:14 PM, Hailiang Zhang wrote:
> On 2016/1/20 10:39, Jason Wang wrote:
>>
>>
>> On 01/19/2016 04:39 PM, Hailiang Zhang wrote:
>>> Hi Jason,
>>>
>>> Thanks for your review.
>>>
>>> On 2016/1/19 11:19, Jason Wang wrote:
>>>>
>>>>
>>>> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>>>>> We add each netdev (except vhost-net) a default filter-buffer,
>>>>> which will be used for COLO or Micro-checkpoint to buffer VM's
>>>>> packets.
>>>>> The name of default filter-buffer is 'nop'.
>>>>> For the default filter-buffer, it will not buffer any packets in
>>>>> default.
>>>>> So it has no side effect for the netdev.
>>>>>
>>>>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>>>>> Cc: Jason Wang <jasowang@redhat.com>
>>>>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>>>>
>>>> This patch did three things:
>>>>
>>>> 1) the ability to enable or disable a netfilter
>>>> 2) the ability to add a default filter
>>>> 3) default filter attaching for filter-buffer
>>>>
>>>> Better to split them into separate small patches.
>>>>
>>>> And several questions:
>>>>
>>>> For 1), I'm not sure this is real needed, we can in fact disable a
>>>> filter by removing it.
>>>
>>> If we do like this, do we also need to _enable_ the buffer filter by
>>> add it dynamically instead of attaching the default filter ?
>>> Just like what we do in V10 ?
>>> (In that series, you think have a default filter may be better.
>>> The main reason for that is to support
>>> hot-add nic. Since we didn't support hot-add nic during COLO,
>>> it will be OK to add default filter dynamically)
>>
>> Aha, right. So rethinking of this, enabling/disabling a filter looks ok
>> to me.
>>
>>>
>>>> For 2), Instead of a specific code just for filter buffer, I think we
>>>> need a generic method for an arbitrary filter to be used as default.
>>>
>>> Good idea.
>>>
>>>> And if we can achieve 2), 3) is not needed any more.
>>>>
>>>>> ---
>>>>> v12:
>>>>> - Skip vhost-net when add default filter
>>>>> - Don't go through filter layer if the filter is disabled.
>>>>> v11:
>>>>> - New patch
>>>>> ---
>>>>> include/net/filter.h | 10 +++++++
>>>>> net/filter-buffer.c | 82
>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> net/filter.c | 6 +++-
>>>>> net/net.c | 12 ++++++++
>>>>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>>>>
[...]
>>>>> +/*
>>>>> +* This will be used by COLO or MC FT, for which they will need
>>>>> +* to buffer the packets of VM's net devices, Here we add a default
>>>>> +* buffer filter for each netdev. The name of default buffer
>>>>> filter is
>>>>> +* 'nop'
>>>>> +*/
>>>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>>>> + NetFilterDirection direction,
>>>>> + Error **errp)
>>>>> +{
>>>>
>>>> Need a more generic way to add an arbitrary filter as default. E.g
>>>> during netdev init, query if there's a default and do the
>>>> initialization
>>>> there.
>>>>
>>>
>>> We call it in net_client_init1(), i don't find a better place to
>>> call it,
>>> what's your suggestion ?
>>
>> net_client_init1() is ok, just need a generic way. E.g a string which
>> stores the default filter and its parameters which could be queried by
>> default filter initialization function.
>>
>
> Hmm, i'm still confused about how to realize this, do you mean change
> this helper
> to a more generic function ? Just like :
> void netdev_add_filter(const char *netdev_id,
> const char *filter_type, char *id,
> Error **errp)
>
> Could you please give me more detail about how to realize it ? :)
I mean you need to know the type of default filter before calling
netdev_add_filter(). May need a global pointer for this, and colo may
set this during initialization. And in the future, we may allow this to
be set from cli.
>
>>>
>>>>> + QmpOutputVisitor *qov;
>>>>> + QmpInputVisitor *qiv;
>>>>> + Visitor *ov, *iv;
>>>>> + QObject *obj = NULL;
>>>>> + QDict *qdict;
>>>>> + void *dummy = NULL;
>>>>> + const char *id = "nop";
>>>>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>>>>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>>>>> + Error *err = NULL;
>>>>> +
>>>>> + /* FIXME: Not support multiple queues */
>>>>> + if (!nc || nc->queue_index > 1) {
>>>>> + g_free(queue);
>>>>> + return;
>>>>> + }
>>>>> + /* Not support vhost-net */
>>>>> + if (get_vhost_net(nc)) {
>>>>> + g_free(queue);
>>>>> + return;
>>>>> + }
>>>>> + qov = qmp_output_visitor_new();
>>>>> + ov = qmp_output_get_visitor(qov);
>>>>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>>>>> + if (err) {
>>>>> + goto out;
>>>>> + }
>>>>> + visit_type_str(ov, &nc->name, "netdev", &err);
>>>>> + if (err) {
>>>>> + goto out;
>>>>> + }
>>>>> + visit_type_str(ov, &queue, "queue", &err);
>>>>> + if (err) {
>>>>> + goto out;
>>>>> + }
>>>>> + visit_end_struct(ov, &err);
>>>>> + if (err) {
>>>>> + goto out;
>>>>> + }
>>>>> + obj = qmp_output_get_qobject(qov);
>>>>> + g_assert(obj != NULL);
>>>>> + qdict = qobject_to_qdict(obj);
>>>>> + qmp_output_visitor_cleanup(qov);
>>>>> +
>>>>> + qiv = qmp_input_visitor_new(obj);
>>>>> + iv = qmp_input_get_visitor(qiv);
>>>>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>>>>> + qmp_input_visitor_cleanup(qiv);
>>>>> + qobject_decref(obj);
>>>>> +out:
>>>>> + g_free(queue);
>>>>> + if (err) {
>>>>> + error_propagate(errp, err);
>>>>> + }
>>>>> +}
>>>>> +
>>>>> static void filter_buffer_init(Object *obj)
>>>>> {
>>>>> object_property_add(obj, "interval", "int",
>>>>> diff --git a/net/filter.c b/net/filter.c
>>>>> index 1365bad..0b1e408 100644
>>>>> --- a/net/filter.c
>>>>> +++ b/net/filter.c
>>>>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable
>>>>> *uc, Error **errp)
>>>>> }
>>>>>
>>>>> nf->netdev = ncs[0];
>>>>> -
>>>>> + nf->is_default = false;
>>>>> + nf->enabled = true;
>>>>
>>>> If we really need something like enabled, need more code for user to
>>>> control this bit.
>>>>
>>>
>>> OK, i will fix it.
>>
>> Or if you want to minimize the change set. You can make something like
>> enabled locally to filter buffer, and let it to be used by colo only.
>>
>
> I have convert it to use object property to set/get the value, is that
> OK ?
>
> Thanks,
> Hailiang
It's ok.
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev
2016-01-20 9:15 ` Jason Wang
@ 2016-01-20 9:27 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-20 9:27 UTC (permalink / raw)
To: Jason Wang, qemu-devel
Cc: xiecl.fnst, zhangchen.fnst, lizhijian, quintela, yunhong.jiang,
eddie.dong, peter.huangpeng, dgilbert, arei.gonglei, stefanha,
amit.shah, hongyang.yang
On 2016/1/20 17:15, Jason Wang wrote:
>
>
> On 01/20/2016 03:14 PM, Hailiang Zhang wrote:
>> On 2016/1/20 10:39, Jason Wang wrote:
>>>
>>>
>>> On 01/19/2016 04:39 PM, Hailiang Zhang wrote:
>>>> Hi Jason,
>>>>
>>>> Thanks for your review.
>>>>
>>>> On 2016/1/19 11:19, Jason Wang wrote:
>>>>>
>>>>>
>>>>> On 12/29/2015 03:09 PM, zhanghailiang wrote:
>>>>>> We add each netdev (except vhost-net) a default filter-buffer,
>>>>>> which will be used for COLO or Micro-checkpoint to buffer VM's
>>>>>> packets.
>>>>>> The name of default filter-buffer is 'nop'.
>>>>>> For the default filter-buffer, it will not buffer any packets in
>>>>>> default.
>>>>>> So it has no side effect for the netdev.
>>>>>>
>>>>>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>>>>>> Cc: Jason Wang <jasowang@redhat.com>
>>>>>> Cc: Yang Hongyang <hongyang.yang@easystack.cn>
>>>>>
>>>>> This patch did three things:
>>>>>
>>>>> 1) the ability to enable or disable a netfilter
>>>>> 2) the ability to add a default filter
>>>>> 3) default filter attaching for filter-buffer
>>>>>
>>>>> Better to split them into separate small patches.
>>>>>
>>>>> And several questions:
>>>>>
>>>>> For 1), I'm not sure this is real needed, we can in fact disable a
>>>>> filter by removing it.
>>>>
>>>> If we do like this, do we also need to _enable_ the buffer filter by
>>>> add it dynamically instead of attaching the default filter ?
>>>> Just like what we do in V10 ?
>>>> (In that series, you think have a default filter may be better.
>>>> The main reason for that is to support
>>>> hot-add nic. Since we didn't support hot-add nic during COLO,
>>>> it will be OK to add default filter dynamically)
>>>
>>> Aha, right. So rethinking of this, enabling/disabling a filter looks ok
>>> to me.
>>>
>>>>
>>>>> For 2), Instead of a specific code just for filter buffer, I think we
>>>>> need a generic method for an arbitrary filter to be used as default.
>>>>
>>>> Good idea.
>>>>
>>>>> And if we can achieve 2), 3) is not needed any more.
>>>>>
>>>>>> ---
>>>>>> v12:
>>>>>> - Skip vhost-net when add default filter
>>>>>> - Don't go through filter layer if the filter is disabled.
>>>>>> v11:
>>>>>> - New patch
>>>>>> ---
>>>>>> include/net/filter.h | 10 +++++++
>>>>>> net/filter-buffer.c | 82
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>>> net/filter.c | 6 +++-
>>>>>> net/net.c | 12 ++++++++
>>>>>> 4 files changed, 109 insertions(+), 1 deletion(-)
>>>>>>
>
> [...]
>
>>>>>> +/*
>>>>>> +* This will be used by COLO or MC FT, for which they will need
>>>>>> +* to buffer the packets of VM's net devices, Here we add a default
>>>>>> +* buffer filter for each netdev. The name of default buffer
>>>>>> filter is
>>>>>> +* 'nop'
>>>>>> +*/
>>>>>> +void netdev_add_default_filter_buffer(const char *netdev_id,
>>>>>> + NetFilterDirection direction,
>>>>>> + Error **errp)
>>>>>> +{
>>>>>
>>>>> Need a more generic way to add an arbitrary filter as default. E.g
>>>>> during netdev init, query if there's a default and do the
>>>>> initialization
>>>>> there.
>>>>>
>>>>
>>>> We call it in net_client_init1(), i don't find a better place to
>>>> call it,
>>>> what's your suggestion ?
>>>
>>> net_client_init1() is ok, just need a generic way. E.g a string which
>>> stores the default filter and its parameters which could be queried by
>>> default filter initialization function.
>>>
>>
>> Hmm, i'm still confused about how to realize this, do you mean change
>> this helper
>> to a more generic function ? Just like :
>> void netdev_add_filter(const char *netdev_id,
>> const char *filter_type, char *id,
>> Error **errp)
>>
>> Could you please give me more detail about how to realize it ? :)
>
> I mean you need to know the type of default filter before calling
> netdev_add_filter(). May need a global pointer for this, and colo may
> set this during initialization. And in the future, we may allow this to
> be set from cli.
>
Got it, i will fix it, thanks!
>>
>>>>
>>>>>> + QmpOutputVisitor *qov;
>>>>>> + QmpInputVisitor *qiv;
>>>>>> + Visitor *ov, *iv;
>>>>>> + QObject *obj = NULL;
>>>>>> + QDict *qdict;
>>>>>> + void *dummy = NULL;
>>>>>> + const char *id = "nop";
>>>>>> + char *queue = g_strdup(NetFilterDirection_lookup[direction]);
>>>>>> + NetClientState *nc = qemu_find_netdev(netdev_id);
>>>>>> + Error *err = NULL;
>>>>>> +
>>>>>> + /* FIXME: Not support multiple queues */
>>>>>> + if (!nc || nc->queue_index > 1) {
>>>>>> + g_free(queue);
>>>>>> + return;
>>>>>> + }
>>>>>> + /* Not support vhost-net */
>>>>>> + if (get_vhost_net(nc)) {
>>>>>> + g_free(queue);
>>>>>> + return;
>>>>>> + }
>>>>>> + qov = qmp_output_visitor_new();
>>>>>> + ov = qmp_output_get_visitor(qov);
>>>>>> + visit_start_struct(ov, &dummy, NULL, NULL, 0, &err);
>>>>>> + if (err) {
>>>>>> + goto out;
>>>>>> + }
>>>>>> + visit_type_str(ov, &nc->name, "netdev", &err);
>>>>>> + if (err) {
>>>>>> + goto out;
>>>>>> + }
>>>>>> + visit_type_str(ov, &queue, "queue", &err);
>>>>>> + if (err) {
>>>>>> + goto out;
>>>>>> + }
>>>>>> + visit_end_struct(ov, &err);
>>>>>> + if (err) {
>>>>>> + goto out;
>>>>>> + }
>>>>>> + obj = qmp_output_get_qobject(qov);
>>>>>> + g_assert(obj != NULL);
>>>>>> + qdict = qobject_to_qdict(obj);
>>>>>> + qmp_output_visitor_cleanup(qov);
>>>>>> +
>>>>>> + qiv = qmp_input_visitor_new(obj);
>>>>>> + iv = qmp_input_get_visitor(qiv);
>>>>>> + object_add(TYPE_FILTER_BUFFER, id, qdict, iv, &err);
>>>>>> + qmp_input_visitor_cleanup(qiv);
>>>>>> + qobject_decref(obj);
>>>>>> +out:
>>>>>> + g_free(queue);
>>>>>> + if (err) {
>>>>>> + error_propagate(errp, err);
>>>>>> + }
>>>>>> +}
>>>>>> +
>>>>>> static void filter_buffer_init(Object *obj)
>>>>>> {
>>>>>> object_property_add(obj, "interval", "int",
>>>>>> diff --git a/net/filter.c b/net/filter.c
>>>>>> index 1365bad..0b1e408 100644
>>>>>> --- a/net/filter.c
>>>>>> +++ b/net/filter.c
>>>>>> @@ -163,7 +163,8 @@ static void netfilter_complete(UserCreatable
>>>>>> *uc, Error **errp)
>>>>>> }
>>>>>>
>>>>>> nf->netdev = ncs[0];
>>>>>> -
>>>>>> + nf->is_default = false;
>>>>>> + nf->enabled = true;
>>>>>
>>>>> If we really need something like enabled, need more code for user to
>>>>> control this bit.
>>>>>
>>>>
>>>> OK, i will fix it.
>>>
>>> Or if you want to minimize the change set. You can make something like
>>> enabled locally to filter buffer, and let it to be used by colo only.
>>>
>>
>> I have convert it to use object property to set/get the value, is that
>> OK ?
>>
>> Thanks,
>> Hailiang
>
> It's ok.
>
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state zhanghailiang
@ 2016-01-26 19:55 ` Dr. David Alan Gilbert
2016-01-27 9:54 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Dr. David Alan Gilbert @ 2016-01-26 19:55 UTC (permalink / raw)
To: zhanghailiang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha,
Paolo Bonzini, amit.shah, zhangchen.fnst, hongyang.yang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> If VM is in COLO FT state, we should do some extra work before normal shutdown
> process. SVM will ignore the shutdown command if this command is issued directly
> to it, PVM will send the shutdown command to SVM if it gets this command.
>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> ---
> v13:
> - Move COLO shutdown related codes to colo.c file (Dave's suggestion)
> diff --git a/migration/colo.c b/migration/colo.c
> index de01ade..2bea519 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -248,6 +248,7 @@ static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
> static int colo_do_checkpoint_transaction(MigrationState *s,
> QEMUSizedBuffer *buffer)
> {
> + int colo_shutdown;
> QEMUFile *trans = NULL;
> size_t size;
> Error *local_err = NULL;
> @@ -277,6 +278,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
> qemu_mutex_unlock_iothread();
> goto out;
> }
> + colo_shutdown = colo_shutdown_requested;
> vm_stop_force_state(RUN_STATE_COLO);
> qemu_mutex_unlock_iothread();
> trace_colo_vm_state_change("run", "stop");
> @@ -330,6 +332,18 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
> goto out;
> }
>
> + if (colo_shutdown) {
Why do you take a copy of colo_shutdown_requested rather than just use
it directly?
Dave
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
@ 2016-01-26 19:59 ` Dr. David Alan Gilbert
0 siblings, 0 replies; 63+ messages in thread
From: Dr. David Alan Gilbert @ 2016-01-26 19:59 UTC (permalink / raw)
To: zhanghailiang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> For COLO's checkpoint process, we will do savevm/loadvm repeatedly.
> So every time we call qemu_loadvm_section_start_full(), we will
> add all sections information into loadvm_handlers list for one time.
> There will be many instances in loadvm_handlers for one section,
> and this will lead to memory leak.
>
> We need to check if we have the section info in loadvm_handlers list
> before save it. For normal migration, it is harmless.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Dave
> ---
> v13:
> - New patch
> ---
> migration/savevm.c | 56 ++++++++++++++++++++++++++++++++++++++----------------
> 1 file changed, 40 insertions(+), 16 deletions(-)
>
> diff --git a/migration/savevm.c b/migration/savevm.c
> index dcfb473..7ceec2d 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1710,6 +1710,37 @@ void loadvm_free_handlers(MigrationIncomingState *mis)
> }
> }
>
> +static LoadStateEntry *loadvm_save_section_entry(MigrationIncomingState *mis,
> + SaveStateEntry *se,
> + uint32_t section_id,
> + uint32_t version_id)
> +{
> + LoadStateEntry *le;
> +
> + /* Add entry */
> + le = g_malloc0(sizeof(*le));
> +
> + le->se = se;
> + le->section_id = section_id;
> + le->version_id = version_id;
> + QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
> + return le;
> +}
> +
> +static LoadStateEntry *loadvm_find_section_entry(MigrationIncomingState *mis,
> + uint32_t section_id)
> +{
> + LoadStateEntry *le;
> +
> + QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
> + if (le->section_id == section_id) {
> + break;
> + }
> + }
> +
> + return le;
> +}
> +
> static int
> qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
> {
> @@ -1745,16 +1776,12 @@ qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
> version_id, idstr, se->version_id);
> return -EINVAL;
> }
> -
> - /* Add entry */
> - le = g_malloc0(sizeof(*le));
> -
> - le->se = se;
> - le->section_id = section_id;
> - le->version_id = version_id;
> - QLIST_INSERT_HEAD(&mis->loadvm_handlers, le, entry);
> -
> - ret = vmstate_load(f, le->se, le->version_id);
> + /* Check if we have saved this section info before, if not, save it */
> + le = loadvm_find_section_entry(mis, section_id);
> + if (!le) {
> + le = loadvm_save_section_entry(mis, se, section_id, version_id);
> + }
> + ret = vmstate_load(f, se, version_id);
> if (ret < 0) {
> error_report("error while loading state for instance 0x%x of"
> " device '%s'", instance_id, idstr);
> @@ -1777,12 +1804,9 @@ qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
> section_id = qemu_get_be32(f);
>
> trace_qemu_loadvm_state_section_partend(section_id);
> - QLIST_FOREACH(le, &mis->loadvm_handlers, entry) {
> - if (le->section_id == section_id) {
> - break;
> - }
> - }
> - if (le == NULL) {
> +
> + le = loadvm_find_section_entry(mis, section_id);
> + if (!le) {
> error_report("Unknown savevm section %d", section_id);
> return -EINVAL;
> }
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state
2016-01-26 19:55 ` Dr. David Alan Gilbert
@ 2016-01-27 9:54 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-27 9:54 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha,
Paolo Bonzini, amit.shah, zhangchen.fnst, hongyang.yang
On 2016/1/27 3:55, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> If VM is in COLO FT state, we should do some extra work before normal shutdown
>> process. SVM will ignore the shutdown command if this command is issued directly
>> to it, PVM will send the shutdown command to SVM if it gets this command.
>>
>> Cc: Paolo Bonzini <pbonzini@redhat.com>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> ---
>> v13:
>> - Move COLO shutdown related codes to colo.c file (Dave's suggestion)
>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index de01ade..2bea519 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -248,6 +248,7 @@ static uint64_t colo_get_cmd_value(QEMUFile *f, uint32_t expect_cmd,
>> static int colo_do_checkpoint_transaction(MigrationState *s,
>> QEMUSizedBuffer *buffer)
>> {
>> + int colo_shutdown;
>> QEMUFile *trans = NULL;
>> size_t size;
>> Error *local_err = NULL;
>> @@ -277,6 +278,7 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
>> qemu_mutex_unlock_iothread();
>> goto out;
>> }
>> + colo_shutdown = colo_shutdown_requested;
>> vm_stop_force_state(RUN_STATE_COLO);
>> qemu_mutex_unlock_iothread();
>> trace_colo_vm_state_change("run", "stop");
>> @@ -330,6 +332,18 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
>> goto out;
>> }
>>
>> + if (colo_shutdown) {
>
> Why do you take a copy of colo_shutdown_requested rather than just use
> it directly?
>
Hmm, it is unnecessary, i will fix it in next version, thanks.
> Dave
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state zhanghailiang
@ 2016-01-27 14:14 ` Dr. David Alan Gilbert
2016-01-30 10:23 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Dr. David Alan Gilbert @ 2016-01-27 14:14 UTC (permalink / raw)
To: zhanghailiang
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> We separate the process of saving/loading ram and device state when do checkpoint,
> we add new helpers for save/load ram/device. With this change, we can directly
> transfer ram from master to slave without using QEMUSizeBuffer as assistant,
> which also reduce the size of extra memory been used during checkpoint.
>
> Besides, we move the colo_flush_ram_cache to the proper position after the
> above change.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> ---
> v13:
> - Re-use some existed helper functions to realize saving/loading ram and device.
> v11:
> - Remove load configuration section in qemu_loadvm_state_begin()
> ---
> include/sysemu/sysemu.h | 6 +++++
> migration/colo.c | 47 ++++++++++++++++++++++++++---------
> migration/ram.c | 5 ----
> migration/savevm.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++---
> 4 files changed, 104 insertions(+), 20 deletions(-)
>
> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> index 91eeda3..f553f8a 100644
> --- a/include/sysemu/sysemu.h
> +++ b/include/sysemu/sysemu.h
> @@ -133,7 +133,13 @@ void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
> uint64_t *start_list,
> uint64_t *length_list);
>
> +void qemu_savevm_live_state(QEMUFile *f);
> +int qemu_save_device_state(QEMUFile *f);
> +
> int qemu_loadvm_state(QEMUFile *f);
> +int qemu_loadvm_state_begin(QEMUFile *f);
> +int qemu_load_ram_state(QEMUFile *f);
> +int qemu_load_device_state(QEMUFile *f);
>
> typedef enum DisplayType
> {
> diff --git a/migration/colo.c b/migration/colo.c
> index fd87f34..4a99819 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -290,21 +290,34 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
> goto out;
> }
>
> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> /* Disable block migration */
> s->params.blk = 0;
> s->params.shared = 0;
> - qemu_savevm_state_header(trans);
> - qemu_savevm_state_begin(trans, &s->params);
> - qemu_mutex_lock_iothread();
> - qemu_savevm_state_complete_precopy(trans, false);
> - qemu_mutex_unlock_iothread();
> -
> - qemu_fflush(trans);
> + qemu_savevm_state_begin(s->to_dst_file, &s->params);
> + ret = qemu_file_get_error(s->to_dst_file);
> + if (ret < 0) {
> + error_report("save vm state begin error");
> + goto out;
> + }
>
> - colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
> - if (local_err) {
> + qemu_mutex_lock_iothread();
> + /* Only save VM's live state, which not including device state */
> + qemu_savevm_live_state(s->to_dst_file);
I'm a little worried that this is done with the lock held;
if the destination hung during this point and there was
enough data to fill the network buffers, couldn't we hang
and then we wouldn't be able to issue the colo_lost_heartbeat
command?
> + /* Note: device state is saved into buffer */
> + ret = qemu_save_device_state(trans);
> + if (ret < 0) {
> + error_report("save device state error\n");
> + qemu_mutex_unlock_iothread();
> goto out;
> }
> + qemu_fflush(trans);
> + qemu_mutex_unlock_iothread();
You can save an unlock by doing:
ret = ...
qemu_mutex_unlock_iothread();
if (ret < 0) {
> /* we send the total size of the vmstate first */
> size = qsb_get_length(buffer);
> colo_put_cmd_value(s->to_dst_file, COLO_COMMAND_VMSTATE_SIZE,
> @@ -573,6 +586,16 @@ void *colo_process_incoming_thread(void *opaque)
> goto out;
> }
>
> + ret = qemu_loadvm_state_begin(mis->from_src_file);
> + if (ret < 0) {
> + error_report("load vm state begin error, ret=%d", ret);
> + goto out;
> + }
> + ret = qemu_load_ram_state(mis->from_src_file);
> + if (ret < 0) {
> + error_report("load ram state error");
> + goto out;
> + }
> /* read the VM state total size first */
> value = colo_get_cmd_value(mis->from_src_file,
> COLO_COMMAND_VMSTATE_SIZE, &local_err);
> @@ -605,8 +628,10 @@ void *colo_process_incoming_thread(void *opaque)
> qemu_mutex_lock_iothread();
> qemu_system_reset(VMRESET_SILENT);
> vmstate_loading = true;
> - if (qemu_loadvm_state(fb) < 0) {
> - error_report("COLO: loadvm failed");
> + colo_flush_ram_cache();
> + ret = qemu_load_device_state(fb);
> + if (ret < 0) {
> + error_report("COLO: load device state failed\n");
Unneeded \n
> vmstate_loading = false;
> qemu_mutex_unlock_iothread();
> goto out;
> diff --git a/migration/ram.c b/migration/ram.c
> index 8ff7f7c..45d9332 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -2458,7 +2458,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
> * be atomic
> */
> bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
> - bool need_flush = false;
>
> seq_iter++;
>
> @@ -2493,7 +2492,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
> /* After going into COLO, we should load the Page into colo_cache */
> if (ram_cache_enable) {
> host = colo_cache_from_block_offset(block, addr);
> - need_flush = true;
> } else {
> host = host_from_ram_block_offset(block, addr);
> }
> @@ -2588,9 +2586,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
>
> rcu_read_unlock();
>
> - if (!ret && ram_cache_enable && need_flush) {
> - colo_flush_ram_cache();
> - }
> DPRINTF("Completed load of VM with exit code %d seq iteration "
> "%" PRIu64 "\n", ret, seq_iter);
> return ret;
> diff --git a/migration/savevm.c b/migration/savevm.c
> index 7ceec2d..7892070 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -50,6 +50,7 @@
> #include "qemu/iov.h"
> #include "block/snapshot.h"
> #include "block/qapi.h"
> +#include "migration/colo.h"
>
>
> #ifndef ETH_P_RARP
> @@ -923,6 +924,10 @@ void qemu_savevm_state_begin(QEMUFile *f,
> break;
> }
> }
> + if (migration_in_colo_state()) {
> + qemu_put_byte(f, QEMU_VM_EOF);
> + qemu_fflush(f);
> + }
> }
>
> /*
> @@ -1192,13 +1197,20 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
> return ret;
> }
>
> -static int qemu_save_device_state(QEMUFile *f)
> +void qemu_savevm_live_state(QEMUFile *f)
> {
> - SaveStateEntry *se;
> + /* save QEMU_VM_SECTION_END section */
> + qemu_savevm_state_complete_precopy(f, true);
> + qemu_put_byte(f, QEMU_VM_EOF);
> +}
>
> - qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
> - qemu_put_be32(f, QEMU_VM_FILE_VERSION);
> +int qemu_save_device_state(QEMUFile *f)
> +{
> + SaveStateEntry *se;
>
> + if (!migration_in_colo_state()) {
> + qemu_savevm_state_header(f);
> + }
> cpu_synchronize_all_states();
>
> QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> @@ -1957,6 +1969,52 @@ int qemu_loadvm_state(QEMUFile *f)
> return ret;
> }
>
> +int qemu_loadvm_state_begin(QEMUFile *f)
> +{
> + MigrationIncomingState *mis = migration_incoming_get_current();
> + Error *local_err = NULL;
> + int ret;
> +
> + if (qemu_savevm_state_blocked(&local_err)) {
> + error_report_err(local_err);
> + return -EINVAL;
> + }
> + /* Load QEMU_VM_SECTION_START section */
> + ret = qemu_loadvm_state_main(f, mis);
> + if (ret < 0) {
> + error_report("Failed to loadvm begin work: %d", ret);
> + }
> + return ret;
> +}
> +
> +int qemu_load_ram_state(QEMUFile *f)
> +{
> + MigrationIncomingState *mis = migration_incoming_get_current();
> + int ret;
> +
> + ret = qemu_loadvm_state_main(f, mis);
> + if (ret < 0) {
> + error_report("Failed to load ram state: %d", ret);
> + }
> + return ret;
> +}
This function does very little; why not just make qemu_loadvm_state_main
non-static and call that directly?
Dave
> +int qemu_load_device_state(QEMUFile *f)
> +{
> + MigrationIncomingState *mis = migration_incoming_get_current();
> + int ret;
> +
> + /* Load QEMU_VM_SECTION_FULL section */
> + ret = qemu_loadvm_state_main(f, mis);
> + if (ret < 0) {
> + error_report("Failed to load device state: %d", ret);
> + return ret;
> + }
> +
> + cpu_synchronize_all_post_init();
> + return 0;
> +}
> +
> void hmp_savevm(Monitor *mon, const QDict *qdict)
> {
> BlockDriverState *bs, *bs1;
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol zhanghailiang
@ 2016-01-29 13:08 ` Dr. David Alan Gilbert
2016-01-30 8:51 ` Hailiang Zhang
0 siblings, 1 reply; 63+ messages in thread
From: Dr. David Alan Gilbert @ 2016-01-29 13:08 UTC (permalink / raw)
To: zhanghailiang
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, qemu-devel,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
* zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
> We need communications protocol of user-defined to control the checkpoint
> process.
>
> The new checkpoint request is started by Primary VM, and the interactive process
> like below:
> Checkpoint synchronizing points:
>
> Primary Secondary
> initial work
> 'checkpoint-ready' <-------------------- @
>
> 'checkpoint-request' @ -------------------->
> Suspend (Only in hybrid mode)
> 'checkpoint-reply' <-------------------- @
> Suspend&Save state
> 'vmstate-send' @ -------------------->
> Send state Receive state
> 'vmstate-received' <-------------------- @
> Release packets Load state
> 'vmstate-load' <-------------------- @
> Resume Resume (Only in hybrid mode)
>
> Start Comparing (Only in hybrid mode)
> NOTE:
> 1) '@' who sends the message
> 2) Every sync-point is synchronized by two sides with only
> one handshake(single direction) for low-latency.
> If more strict synchronization is required, a opposite direction
> sync-point should be added.
> 3) Since sync-points are single direction, the remote side may
> go forward a lot when this side just receives the sync-point.
> 4) For now, we only support 'periodic' checkpoint, for which
> the Secondary VM is not running, later we will support 'hybrid' mode.
>
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
> Cc: Eric Blake <eblake@redhat.com>
> Cc: Markus Armbruster <armbru@redhat.com>
> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> v13:
> - Refactor colo command related helper functions, use 'Error **errp' parameter
> instead of return value to indicate success or failure.
> - Fix some other comments from Markus.
>
> v12:
> - Rename colo_ctl_put() to colo_put_cmd()
> - Rename colo_ctl_get() to colo_get_check_cmd() and drop
> the third parameter
> - Rename colo_ctl_get_cmd() to colo_get_cmd()
> - Remove useless 'invalid' member for COLOcommand enum.
> v11:
> - Add missing 'checkpoint-ready' communication in comment.
> - Use parameter to return 'value' for colo_ctl_get() (Dave's suggestion)
> - Fix trace for colo_ctl_get() to trace command and value both
> v10:
> - Rename enum COLOCmd to COLOCommand (Eric's suggestion).
> - Remove unused 'ram-steal'
> ---
> migration/colo.c | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> qapi-schema.json | 25 +++++++
> trace-events | 2 +
> 3 files changed, 226 insertions(+), 2 deletions(-)
>
> diff --git a/migration/colo.c b/migration/colo.c
> index 65ac0c9..c76e1fa 100644
> --- a/migration/colo.c
> +++ b/migration/colo.c
> @@ -10,6 +10,7 @@
> * later. See the COPYING file in the top-level directory.
> */
>
> +#include <unistd.h>
> #include "sysemu/sysemu.h"
> #include "migration/colo.h"
> #include "trace.h"
> @@ -34,22 +35,147 @@ bool migration_incoming_in_colo_state(void)
> return mis && (mis->state == MIGRATION_STATUS_COLO);
> }
>
> +static void colo_put_cmd(QEMUFile *f, COLOCommand cmd,
> + Error **errp)
> +{
> + int ret;
> +
> + if (cmd >= COLO_COMMAND__MAX) {
> + error_setg(errp, "%s: Invalid cmd", __func__);
> + return;
> + }
> + qemu_put_be32(f, cmd);
> + qemu_fflush(f);
> +
> + ret = qemu_file_get_error(f);
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Can't put COLO command");
> + }
> + trace_colo_put_cmd(COLOCommand_lookup[cmd]);
> +}
> +
> +static COLOCommand colo_get_cmd(QEMUFile *f, Error **errp)
> +{
> + COLOCommand cmd;
> + int ret;
> +
> + cmd = qemu_get_be32(f);
> + ret = qemu_file_get_error(f);
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Can't get COLO command");
> + return cmd;
> + }
> + if (cmd >= COLO_COMMAND__MAX) {
I'm not sure this is guaranteed to do the right thing if the value
read was negative and converted to the enum; it seems to depend
a bit on the compiler as to whether an enum is signed or not;
but it seems the normal behaviour is for the enum to be unsigned
as long as there are no negative values when it's declared; so it looks
safe in practice.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> + error_setg(errp, "%s: Invalid cmd", __func__);
> + return cmd;
> + }
> + trace_colo_get_cmd(COLOCommand_lookup[cmd]);
> + return cmd;
> +}
> +
> +static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
> + Error **errp)
> +{
> + COLOCommand cmd;
> + Error *local_err = NULL;
> +
> + cmd = colo_get_cmd(f, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + return;
> + }
> + if (cmd != expect_cmd) {
> + error_setg(errp, "Unexpected COLO command %d, expected %d",
> + expect_cmd, cmd);
> + }
> +}
> +
> +static int colo_do_checkpoint_transaction(MigrationState *s)
> +{
> + Error *local_err = NULL;
> +
> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_CHECKPOINT_REQUEST,
> + &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + colo_get_check_cmd(s->rp_state.from_dst_file,
> + COLO_COMMAND_CHECKPOINT_REPLY, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* TODO: suspend and save vm state to colo buffer */
> +
> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* TODO: send vmstate to Secondary */
> +
> + colo_get_check_cmd(s->rp_state.from_dst_file,
> + COLO_COMMAND_VMSTATE_RECEIVED, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + colo_get_check_cmd(s->rp_state.from_dst_file,
> + COLO_COMMAND_VMSTATE_LOADED, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* TODO: resume Primary */
> +
> + return 0;
> +out:
> + if (local_err) {
> + error_report_err(local_err);
> + }
> + return -EINVAL;
> +}
> +
> static void colo_process_checkpoint(MigrationState *s)
> {
> + Error *local_err = NULL;
> + int ret;
> +
> s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
> if (!s->rp_state.from_dst_file) {
> error_report("Open QEMUFile from_dst_file failed");
> goto out;
> }
>
> + /*
> + * Wait for Secondary finish loading vm states and enter COLO
> + * restore.
> + */
> + colo_get_check_cmd(s->rp_state.from_dst_file,
> + COLO_COMMAND_CHECKPOINT_READY, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> qemu_mutex_lock_iothread();
> vm_start();
> qemu_mutex_unlock_iothread();
> trace_colo_vm_state_change("stop", "run");
>
> - /*TODO: COLO checkpoint savevm loop*/
> + while (s->state == MIGRATION_STATUS_COLO) {
> + /* start a colo checkpoint */
> + ret = colo_do_checkpoint_transaction(s);
> + if (ret < 0) {
> + goto out;
> + }
> + }
>
> out:
> + /* Throw the unreported error message after exited from loop */
> + if (local_err) {
> + error_report_err(local_err);
> + }
> migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
> MIGRATION_STATUS_COMPLETED);
>
> @@ -67,9 +193,33 @@ void migrate_start_colo_process(MigrationState *s)
> qemu_mutex_lock_iothread();
> }
>
> +static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
> + Error **errp)
> +{
> + COLOCommand cmd;
> + Error *local_err = NULL;
> +
> + cmd = colo_get_cmd(f, &local_err);
> + if (local_err) {
> + error_propagate(errp, local_err);
> + return;
> + }
> +
> + switch (cmd) {
> + case COLO_COMMAND_CHECKPOINT_REQUEST:
> + *checkpoint_request = 1;
> + break;
> + default:
> + *checkpoint_request = 0;
> + error_setg(errp, "Got unknown COLO command: %d", cmd);
> + break;
> + }
> +}
> +
> void *colo_process_incoming_thread(void *opaque)
> {
> MigrationIncomingState *mis = opaque;
> + Error *local_err = NULL;
>
> migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
> MIGRATION_STATUS_COLO);
> @@ -85,9 +235,56 @@ void *colo_process_incoming_thread(void *opaque)
> */
> qemu_file_set_blocking(mis->from_src_file, true);
>
> - /* TODO: COLO checkpoint restore loop */
> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
> + &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + while (mis->state == MIGRATION_STATUS_COLO) {
> + int request;
> +
> + colo_wait_handle_cmd(mis->from_src_file, &request, &local_err);
> + if (local_err) {
> + goto out;
> + }
> + assert(request);
> + /* FIXME: This is unnecessary for periodic checkpoint mode */
> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_REPLY,
> + &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + colo_get_check_cmd(mis->from_src_file,
> + COLO_COMMAND_VMSTATE_SEND, &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* TODO: read migration data into colo buffer */
> +
> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
> + &local_err);
> + if (local_err) {
> + goto out;
> + }
> +
> + /* TODO: load vm state */
> +
> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
> + &local_err);
> + if (local_err) {
> + goto out;
> + }
> + }
>
> out:
> + /* Throw the unreported error message after exited from loop */
> + if (local_err) {
> + error_report_err(local_err);
> + }
> +
> if (mis->to_src_file) {
> qemu_fclose(mis->to_src_file);
> }
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 6eefad2..4ea4108 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -718,6 +718,31 @@
> { 'command': 'migrate-start-postcopy' }
>
> ##
> +# @COLOCommand
> +#
> +# The commands for COLO fault tolerance
> +#
> +# @checkpoint-ready: SVM is ready for checkpointing
> +#
> +# @checkpoint-request: PVM tells SVM to prepare for new checkpointing
> +#
> +# @checkpoint-reply: SVM gets PVM's checkpoint request
> +#
> +# @vmstate-send: VM's state will be sent by PVM.
> +#
> +# @vmstate-size: The total size of VMstate.
> +#
> +# @vmstate-received: VM's state has been received by SVM.
> +#
> +# @vmstate-loaded: VM's state has been loaded by SVM.
> +#
> +# Since: 2.6
> +##
> +{ 'enum': 'COLOCommand',
> + 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
> + 'vmstate-send', 'vmstate-size', 'vmstate-received',
> + 'vmstate-loaded' ] }
> +
> # @MouseInfo:
> #
> # Information about a mouse device.
> diff --git a/trace-events b/trace-events
> index 57ddc8f..51b2305 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -1581,6 +1581,8 @@ postcopy_ram_incoming_cleanup_join(void) ""
>
> # migration/colo.c
> colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
> +colo_put_cmd(const char *msg) "Send '%s' cmd"
> +colo_get_cmd(const char *msg) "Receive '%s' cmd"
>
> # kvm-all.c
> kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
> --
> 1.8.3.1
>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol
2016-01-29 13:08 ` Dr. David Alan Gilbert
@ 2016-01-30 8:51 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-30 8:51 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: xiecl.fnst, lizhijian, quintela, Markus Armbruster,
yunhong.jiang, eddie.dong, peter.huangpeng, qemu-devel,
arei.gonglei, stefanha, amit.shah, zhangchen.fnst, hongyang.yang
On 2016/1/29 21:08, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> We need communications protocol of user-defined to control the checkpoint
>> process.
>>
>> The new checkpoint request is started by Primary VM, and the interactive process
>> like below:
>> Checkpoint synchronizing points:
>>
>> Primary Secondary
>> initial work
>> 'checkpoint-ready' <-------------------- @
>>
>> 'checkpoint-request' @ -------------------->
>> Suspend (Only in hybrid mode)
>> 'checkpoint-reply' <-------------------- @
>> Suspend&Save state
>> 'vmstate-send' @ -------------------->
>> Send state Receive state
>> 'vmstate-received' <-------------------- @
>> Release packets Load state
>> 'vmstate-load' <-------------------- @
>> Resume Resume (Only in hybrid mode)
>>
>> Start Comparing (Only in hybrid mode)
>> NOTE:
>> 1) '@' who sends the message
>> 2) Every sync-point is synchronized by two sides with only
>> one handshake(single direction) for low-latency.
>> If more strict synchronization is required, a opposite direction
>> sync-point should be added.
>> 3) Since sync-points are single direction, the remote side may
>> go forward a lot when this side just receives the sync-point.
>> 4) For now, we only support 'periodic' checkpoint, for which
>> the Secondary VM is not running, later we will support 'hybrid' mode.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Signed-off-by: Gonglei <arei.gonglei@huawei.com>
>> Cc: Eric Blake <eblake@redhat.com>
>> Cc: Markus Armbruster <armbru@redhat.com>
>> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
>> ---
>> v13:
>> - Refactor colo command related helper functions, use 'Error **errp' parameter
>> instead of return value to indicate success or failure.
>> - Fix some other comments from Markus.
>>
>> v12:
>> - Rename colo_ctl_put() to colo_put_cmd()
>> - Rename colo_ctl_get() to colo_get_check_cmd() and drop
>> the third parameter
>> - Rename colo_ctl_get_cmd() to colo_get_cmd()
>> - Remove useless 'invalid' member for COLOcommand enum.
>> v11:
>> - Add missing 'checkpoint-ready' communication in comment.
>> - Use parameter to return 'value' for colo_ctl_get() (Dave's suggestion)
>> - Fix trace for colo_ctl_get() to trace command and value both
>> v10:
>> - Rename enum COLOCmd to COLOCommand (Eric's suggestion).
>> - Remove unused 'ram-steal'
>> ---
>> migration/colo.c | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
>> qapi-schema.json | 25 +++++++
>> trace-events | 2 +
>> 3 files changed, 226 insertions(+), 2 deletions(-)
>>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index 65ac0c9..c76e1fa 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -10,6 +10,7 @@
>> * later. See the COPYING file in the top-level directory.
>> */
>>
>> +#include <unistd.h>
>> #include "sysemu/sysemu.h"
>> #include "migration/colo.h"
>> #include "trace.h"
>> @@ -34,22 +35,147 @@ bool migration_incoming_in_colo_state(void)
>> return mis && (mis->state == MIGRATION_STATUS_COLO);
>> }
>>
>> +static void colo_put_cmd(QEMUFile *f, COLOCommand cmd,
>> + Error **errp)
>> +{
>> + int ret;
>> +
>> + if (cmd >= COLO_COMMAND__MAX) {
>> + error_setg(errp, "%s: Invalid cmd", __func__);
>> + return;
>> + }
>> + qemu_put_be32(f, cmd);
>> + qemu_fflush(f);
>> +
>> + ret = qemu_file_get_error(f);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Can't put COLO command");
>> + }
>> + trace_colo_put_cmd(COLOCommand_lookup[cmd]);
>> +}
>> +
>> +static COLOCommand colo_get_cmd(QEMUFile *f, Error **errp)
>> +{
>> + COLOCommand cmd;
>> + int ret;
>> +
>> + cmd = qemu_get_be32(f);
>> + ret = qemu_file_get_error(f);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Can't get COLO command");
>> + return cmd;
>> + }
>> + if (cmd >= COLO_COMMAND__MAX) {
>
> I'm not sure this is guaranteed to do the right thing if the value
> read was negative and converted to the enum; it seems to depend
> a bit on the compiler as to whether an enum is signed or not;
> but it seems the normal behaviour is for the enum to be unsigned
Interesting question, we can define a negative enumeration-constant,
enum test {
TEST_A = -2,
TEST_B = 0,
} value;
So i suppose an enum is signed, and ISO C standard (c99 6.4.4.3) states that
the enumeration constants are of type int.
But it seems that gcc does not follow this standard strictly,
i got the exact answer from its specification:
https://gcc.gnu.org/onlinedocs/gcc/Structures-unions-enumerations-and-bit-fields-implementation.html#Structures-unions-enumerations-and-bit-fields-implementation
"Normally, the type is unsigned int if there are no negative values in the enumeration, otherwise int."
> as long as there are no negative values when it's declared; so it looks
> safe in practice.
>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
>
Thanks,
Hailiang
>> + error_setg(errp, "%s: Invalid cmd", __func__);
>> + return cmd;
>> + }
>> + trace_colo_get_cmd(COLOCommand_lookup[cmd]);
>> + return cmd;
>> +}
>> +
>> +static void colo_get_check_cmd(QEMUFile *f, COLOCommand expect_cmd,
>> + Error **errp)
>> +{
>> + COLOCommand cmd;
>> + Error *local_err = NULL;
>> +
>> + cmd = colo_get_cmd(f, &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> + return;
>> + }
>> + if (cmd != expect_cmd) {
>> + error_setg(errp, "Unexpected COLO command %d, expected %d",
>> + expect_cmd, cmd);
>> + }
>> +}
>> +
>> +static int colo_do_checkpoint_transaction(MigrationState *s)
>> +{
>> + Error *local_err = NULL;
>> +
>> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_CHECKPOINT_REQUEST,
>> + &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + colo_get_check_cmd(s->rp_state.from_dst_file,
>> + COLO_COMMAND_CHECKPOINT_REPLY, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* TODO: suspend and save vm state to colo buffer */
>> +
>> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* TODO: send vmstate to Secondary */
>> +
>> + colo_get_check_cmd(s->rp_state.from_dst_file,
>> + COLO_COMMAND_VMSTATE_RECEIVED, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + colo_get_check_cmd(s->rp_state.from_dst_file,
>> + COLO_COMMAND_VMSTATE_LOADED, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* TODO: resume Primary */
>> +
>> + return 0;
>> +out:
>> + if (local_err) {
>> + error_report_err(local_err);
>> + }
>> + return -EINVAL;
>> +}
>> +
>> static void colo_process_checkpoint(MigrationState *s)
>> {
>> + Error *local_err = NULL;
>> + int ret;
>> +
>> s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
>> if (!s->rp_state.from_dst_file) {
>> error_report("Open QEMUFile from_dst_file failed");
>> goto out;
>> }
>>
>> + /*
>> + * Wait for Secondary finish loading vm states and enter COLO
>> + * restore.
>> + */
>> + colo_get_check_cmd(s->rp_state.from_dst_file,
>> + COLO_COMMAND_CHECKPOINT_READY, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> qemu_mutex_lock_iothread();
>> vm_start();
>> qemu_mutex_unlock_iothread();
>> trace_colo_vm_state_change("stop", "run");
>>
>> - /*TODO: COLO checkpoint savevm loop*/
>> + while (s->state == MIGRATION_STATUS_COLO) {
>> + /* start a colo checkpoint */
>> + ret = colo_do_checkpoint_transaction(s);
>> + if (ret < 0) {
>> + goto out;
>> + }
>> + }
>>
>> out:
>> + /* Throw the unreported error message after exited from loop */
>> + if (local_err) {
>> + error_report_err(local_err);
>> + }
>> migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
>> MIGRATION_STATUS_COMPLETED);
>>
>> @@ -67,9 +193,33 @@ void migrate_start_colo_process(MigrationState *s)
>> qemu_mutex_lock_iothread();
>> }
>>
>> +static void colo_wait_handle_cmd(QEMUFile *f, int *checkpoint_request,
>> + Error **errp)
>> +{
>> + COLOCommand cmd;
>> + Error *local_err = NULL;
>> +
>> + cmd = colo_get_cmd(f, &local_err);
>> + if (local_err) {
>> + error_propagate(errp, local_err);
>> + return;
>> + }
>> +
>> + switch (cmd) {
>> + case COLO_COMMAND_CHECKPOINT_REQUEST:
>> + *checkpoint_request = 1;
>> + break;
>> + default:
>> + *checkpoint_request = 0;
>> + error_setg(errp, "Got unknown COLO command: %d", cmd);
>> + break;
>> + }
>> +}
>> +
>> void *colo_process_incoming_thread(void *opaque)
>> {
>> MigrationIncomingState *mis = opaque;
>> + Error *local_err = NULL;
>>
>> migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
>> MIGRATION_STATUS_COLO);
>> @@ -85,9 +235,56 @@ void *colo_process_incoming_thread(void *opaque)
>> */
>> qemu_file_set_blocking(mis->from_src_file, true);
>>
>> - /* TODO: COLO checkpoint restore loop */
>> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_READY,
>> + &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + while (mis->state == MIGRATION_STATUS_COLO) {
>> + int request;
>> +
>> + colo_wait_handle_cmd(mis->from_src_file, &request, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> + assert(request);
>> + /* FIXME: This is unnecessary for periodic checkpoint mode */
>> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_CHECKPOINT_REPLY,
>> + &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + colo_get_check_cmd(mis->from_src_file,
>> + COLO_COMMAND_VMSTATE_SEND, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* TODO: read migration data into colo buffer */
>> +
>> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_RECEIVED,
>> + &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> + /* TODO: load vm state */
>> +
>> + colo_put_cmd(mis->to_src_file, COLO_COMMAND_VMSTATE_LOADED,
>> + &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> + }
>>
>> out:
>> + /* Throw the unreported error message after exited from loop */
>> + if (local_err) {
>> + error_report_err(local_err);
>> + }
>> +
>> if (mis->to_src_file) {
>> qemu_fclose(mis->to_src_file);
>> }
>> diff --git a/qapi-schema.json b/qapi-schema.json
>> index 6eefad2..4ea4108 100644
>> --- a/qapi-schema.json
>> +++ b/qapi-schema.json
>> @@ -718,6 +718,31 @@
>> { 'command': 'migrate-start-postcopy' }
>>
>> ##
>> +# @COLOCommand
>> +#
>> +# The commands for COLO fault tolerance
>> +#
>> +# @checkpoint-ready: SVM is ready for checkpointing
>> +#
>> +# @checkpoint-request: PVM tells SVM to prepare for new checkpointing
>> +#
>> +# @checkpoint-reply: SVM gets PVM's checkpoint request
>> +#
>> +# @vmstate-send: VM's state will be sent by PVM.
>> +#
>> +# @vmstate-size: The total size of VMstate.
>> +#
>> +# @vmstate-received: VM's state has been received by SVM.
>> +#
>> +# @vmstate-loaded: VM's state has been loaded by SVM.
>> +#
>> +# Since: 2.6
>> +##
>> +{ 'enum': 'COLOCommand',
>> + 'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
>> + 'vmstate-send', 'vmstate-size', 'vmstate-received',
>> + 'vmstate-loaded' ] }
>> +
>> # @MouseInfo:
>> #
>> # Information about a mouse device.
>> diff --git a/trace-events b/trace-events
>> index 57ddc8f..51b2305 100644
>> --- a/trace-events
>> +++ b/trace-events
>> @@ -1581,6 +1581,8 @@ postcopy_ram_incoming_cleanup_join(void) ""
>>
>> # migration/colo.c
>> colo_vm_state_change(const char *old, const char *new) "Change '%s' => '%s'"
>> +colo_put_cmd(const char *msg) "Send '%s' cmd"
>> +colo_get_cmd(const char *msg) "Receive '%s' cmd"
>>
>> # kvm-all.c
>> kvm_ioctl(int type, void *arg) "type 0x%x, arg %p"
>> --
>> 1.8.3.1
>>
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
* Re: [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state
2016-01-27 14:14 ` Dr. David Alan Gilbert
@ 2016-01-30 10:23 ` Hailiang Zhang
0 siblings, 0 replies; 63+ messages in thread
From: Hailiang Zhang @ 2016-01-30 10:23 UTC (permalink / raw)
To: Dr. David Alan Gilbert
Cc: xiecl.fnst, lizhijian, quintela, yunhong.jiang, eddie.dong,
peter.huangpeng, qemu-devel, arei.gonglei, stefanha, amit.shah,
zhangchen.fnst, hongyang.yang
On 2016/1/27 22:14, Dr. David Alan Gilbert wrote:
> * zhanghailiang (zhang.zhanghailiang@huawei.com) wrote:
>> We separate the process of saving/loading ram and device state when do checkpoint,
>> we add new helpers for save/load ram/device. With this change, we can directly
>> transfer ram from master to slave without using QEMUSizeBuffer as assistant,
>> which also reduce the size of extra memory been used during checkpoint.
>>
>> Besides, we move the colo_flush_ram_cache to the proper position after the
>> above change.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> ---
>> v13:
>> - Re-use some existed helper functions to realize saving/loading ram and device.
>> v11:
>> - Remove load configuration section in qemu_loadvm_state_begin()
>> ---
>> include/sysemu/sysemu.h | 6 +++++
>> migration/colo.c | 47 ++++++++++++++++++++++++++---------
>> migration/ram.c | 5 ----
>> migration/savevm.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++---
>> 4 files changed, 104 insertions(+), 20 deletions(-)
>>
>> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
>> index 91eeda3..f553f8a 100644
>> --- a/include/sysemu/sysemu.h
>> +++ b/include/sysemu/sysemu.h
>> @@ -133,7 +133,13 @@ void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
>> uint64_t *start_list,
>> uint64_t *length_list);
>>
>> +void qemu_savevm_live_state(QEMUFile *f);
>> +int qemu_save_device_state(QEMUFile *f);
>> +
>> int qemu_loadvm_state(QEMUFile *f);
>> +int qemu_loadvm_state_begin(QEMUFile *f);
>> +int qemu_load_ram_state(QEMUFile *f);
>> +int qemu_load_device_state(QEMUFile *f);
>>
>> typedef enum DisplayType
>> {
>> diff --git a/migration/colo.c b/migration/colo.c
>> index fd87f34..4a99819 100644
>> --- a/migration/colo.c
>> +++ b/migration/colo.c
>> @@ -290,21 +290,34 @@ static int colo_do_checkpoint_transaction(MigrationState *s,
>> goto out;
>> }
>>
>> + colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
>> + if (local_err) {
>> + goto out;
>> + }
>> +
>> /* Disable block migration */
>> s->params.blk = 0;
>> s->params.shared = 0;
>> - qemu_savevm_state_header(trans);
>> - qemu_savevm_state_begin(trans, &s->params);
>> - qemu_mutex_lock_iothread();
>> - qemu_savevm_state_complete_precopy(trans, false);
>> - qemu_mutex_unlock_iothread();
>> -
>> - qemu_fflush(trans);
>> + qemu_savevm_state_begin(s->to_dst_file, &s->params);
>> + ret = qemu_file_get_error(s->to_dst_file);
>> + if (ret < 0) {
>> + error_report("save vm state begin error");
>> + goto out;
>> + }
>>
>> - colo_put_cmd(s->to_dst_file, COLO_COMMAND_VMSTATE_SEND, &local_err);
>> - if (local_err) {
>
>
>> + qemu_mutex_lock_iothread();
>> + /* Only save VM's live state, which not including device state */
>> + qemu_savevm_live_state(s->to_dst_file);
>
> I'm a little worried that this is done with the lock held;
> if the destination hung during this point and there was
> enough data to fill the network buffers, couldn't we hang
> and then we wouldn't be able to issue the colo_lost_heartbeat
> command?
>
Yes, here we may encounter this problem, i'm wondering if it is
safe to save the remaining pages without holding this lock,
do you know why we must hold this lock while in the completion stage
of migration while VM is stopped?
>> + /* Note: device state is saved into buffer */
>> + ret = qemu_save_device_state(trans);
>> + if (ret < 0) {
>> + error_report("save device state error\n");
>> + qemu_mutex_unlock_iothread();
>> goto out;
>> }
>> + qemu_fflush(trans);
>> + qemu_mutex_unlock_iothread();
>
> You can save an unlock by doing:
> ret = ...
> qemu_mutex_unlock_iothread();
> if (ret < 0) {
>
I will fix it in next version.
>
>> /* we send the total size of the vmstate first */
>> size = qsb_get_length(buffer);
>> colo_put_cmd_value(s->to_dst_file, COLO_COMMAND_VMSTATE_SIZE,
>> @@ -573,6 +586,16 @@ void *colo_process_incoming_thread(void *opaque)
>> goto out;
>> }
>>
>> + ret = qemu_loadvm_state_begin(mis->from_src_file);
>> + if (ret < 0) {
>> + error_report("load vm state begin error, ret=%d", ret);
>> + goto out;
>> + }
>> + ret = qemu_load_ram_state(mis->from_src_file);
>> + if (ret < 0) {
>> + error_report("load ram state error");
>> + goto out;
>> + }
>> /* read the VM state total size first */
>> value = colo_get_cmd_value(mis->from_src_file,
>> COLO_COMMAND_VMSTATE_SIZE, &local_err);
>> @@ -605,8 +628,10 @@ void *colo_process_incoming_thread(void *opaque)
>> qemu_mutex_lock_iothread();
>> qemu_system_reset(VMRESET_SILENT);
>> vmstate_loading = true;
>> - if (qemu_loadvm_state(fb) < 0) {
>> - error_report("COLO: loadvm failed");
>> + colo_flush_ram_cache();
>> + ret = qemu_load_device_state(fb);
>> + if (ret < 0) {
>> + error_report("COLO: load device state failed\n");
>
> Unneeded \n
>
[...]
>> vmstate_loading = false;
>> qemu_mutex_unlock_iothread();
>> goto out;
>> diff --git a/migration/ram.c b/migration/ram.c
>> index 8ff7f7c..45d9332 100644
>> --- a/migration/ram.c
>> +++ b/migration/ram.c
>> @@ -2458,7 +2458,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
>> * be atomic
>> */
>> bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
>> - bool need_flush = false;
>>
>> seq_iter++;
>>
>> @@ -2493,7 +2492,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
>> /* After going into COLO, we should load the Page into colo_cache */
>> if (ram_cache_enable) {
>> host = colo_cache_from_block_offset(block, addr);
>> - need_flush = true;
>> } else {
>> host = host_from_ram_block_offset(block, addr);
>> }
>> @@ -2588,9 +2586,6 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
>>
>> rcu_read_unlock();
>>
>> - if (!ret && ram_cache_enable && need_flush) {
>> - colo_flush_ram_cache();
>> - }
>> DPRINTF("Completed load of VM with exit code %d seq iteration "
>> "%" PRIu64 "\n", ret, seq_iter);
>> return ret;
>> diff --git a/migration/savevm.c b/migration/savevm.c
>> index 7ceec2d..7892070 100644
>> --- a/migration/savevm.c
>> +++ b/migration/savevm.c
>> @@ -50,6 +50,7 @@
>> #include "qemu/iov.h"
>> #include "block/snapshot.h"
>> #include "block/qapi.h"
>> +#include "migration/colo.h"
>>
>>
>> #ifndef ETH_P_RARP
>> @@ -923,6 +924,10 @@ void qemu_savevm_state_begin(QEMUFile *f,
>> break;
>> }
>> }
>> + if (migration_in_colo_state()) {
>> + qemu_put_byte(f, QEMU_VM_EOF);
>> + qemu_fflush(f);
>> + }
>> }
>>
>> /*
>> @@ -1192,13 +1197,20 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
>> return ret;
>> }
>>
>> -static int qemu_save_device_state(QEMUFile *f)
>> +void qemu_savevm_live_state(QEMUFile *f)
>> {
>> - SaveStateEntry *se;
>> + /* save QEMU_VM_SECTION_END section */
>> + qemu_savevm_state_complete_precopy(f, true);
>> + qemu_put_byte(f, QEMU_VM_EOF);
>> +}
>>
>> - qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
>> - qemu_put_be32(f, QEMU_VM_FILE_VERSION);
>> +int qemu_save_device_state(QEMUFile *f)
>> +{
>> + SaveStateEntry *se;
>>
>> + if (!migration_in_colo_state()) {
>> + qemu_savevm_state_header(f);
>> + }
>> cpu_synchronize_all_states();
>>
>> QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
>> @@ -1957,6 +1969,52 @@ int qemu_loadvm_state(QEMUFile *f)
>> return ret;
>> }
>>
>> +int qemu_loadvm_state_begin(QEMUFile *f)
>> +{
>> + MigrationIncomingState *mis = migration_incoming_get_current();
>> + Error *local_err = NULL;
>> + int ret;
>> +
>> + if (qemu_savevm_state_blocked(&local_err)) {
>> + error_report_err(local_err);
>> + return -EINVAL;
>> + }
>> + /* Load QEMU_VM_SECTION_START section */
>> + ret = qemu_loadvm_state_main(f, mis);
>> + if (ret < 0) {
>> + error_report("Failed to loadvm begin work: %d", ret);
>> + }
>> + return ret;
>> +}
>> +
>> +int qemu_load_ram_state(QEMUFile *f)
>> +{
>> + MigrationIncomingState *mis = migration_incoming_get_current();
>> + int ret;
>> +
>> + ret = qemu_loadvm_state_main(f, mis);
>> + if (ret < 0) {
>> + error_report("Failed to load ram state: %d", ret);
>> + }
>> + return ret;
>> +}
>
> This function does very little; why not just make qemu_loadvm_state_main
> non-static and call that directly?
>
Hmm, no special, i will fix it in next version.
Thanks,
Hailiang
>
>> +int qemu_load_device_state(QEMUFile *f)
>> +{
>> + MigrationIncomingState *mis = migration_incoming_get_current();
>> + int ret;
>> +
>> + /* Load QEMU_VM_SECTION_FULL section */
>> + ret = qemu_loadvm_state_main(f, mis);
>> + if (ret < 0) {
>> + error_report("Failed to load device state: %d", ret);
>> + return ret;
>> + }
>> +
>> + cpu_synchronize_all_post_init();
>> + return 0;
>> +}
>> +
>> void hmp_savevm(Monitor *mon, const QDict *qdict)
>> {
>> BlockDriverState *bs, *bs1;
>> --
>> 1.8.3.1
>>
>>
> --
> Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
>
> .
>
^ permalink raw reply [flat|nested] 63+ messages in thread
end of thread, other threads:[~2016-01-30 10:24 UTC | newest]
Thread overview: 63+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-29 7:08 [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 01/39] configure: Add parameter for configure to enable/disable COLO support zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 02/39] migration: Introduce capability 'x-colo' to migration zhanghailiang
2015-12-29 7:08 ` [Qemu-devel] [PATCH COLO-Frame v13 03/39] COLO: migrate colo related info to secondary node zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 04/39] migration: Export migrate_set_state() zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 05/39] migration: Add state records for migration incoming zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 06/39] migration: Integrate COLO checkpoint process into migration zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 07/39] migration: Integrate COLO checkpoint process into loadvm zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 08/39] migration: Rename the'file' member of MigrationState zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 09/39] COLO/migration: Create a new communication path from destination to source zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 10/39] COLO: Implement colo checkpoint protocol zhanghailiang
2016-01-29 13:08 ` Dr. David Alan Gilbert
2016-01-30 8:51 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 11/39] COLO: Add a new RunState RUN_STATE_COLO zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 12/39] QEMUSizedBuffer: Introduce two help functions for qsb zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 13/39] COLO: Save PVM state to secondary side when do checkpoint zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 14/39] ram: Split host_from_stream_offset() into two helper functions zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 15/39] COLO: Load PVM's dirty pages into SVM's RAM cache temporarily zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 16/39] ram/COLO: Record the dirty pages that SVM received zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 17/39] COLO: Load VMState into qsb before restore it zhanghailiang
2016-01-04 19:00 ` Dr. David Alan Gilbert
2016-01-11 1:16 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 18/39] COLO: Flush PVM's cached RAM into SVM's memory zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 19/39] COLO: Add checkpoint-delay parameter for migrate-set-parameters zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 20/39] COLO: synchronize PVM's state to SVM periodically zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 21/39] COLO failover: Introduce a new command to trigger a failover zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 22/39] COLO failover: Introduce state to record failover process zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 23/39] COLO: Implement failover work for Primary VM zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 24/39] COLO: Implement failover work for Secondary VM zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 25/39] qmp event: Add COLO_EXIT event to notify users while exited from COLO zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 26/39] COLO failover: Shutdown related socket fd when do failover zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 27/39] COLO failover: Don't do failover during loading VM's state zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 28/39] COLO: Process shutdown command for VM in COLO state zhanghailiang
2016-01-26 19:55 ` Dr. David Alan Gilbert
2016-01-27 9:54 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 29/39] COLO: Update the global runstate after going into colo state zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 30/39] savevm: Split load vm state function qemu_loadvm_state zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 31/39] savevm: Introduce two helper functions for save/find loadvm_handlers entry zhanghailiang
2016-01-26 19:59 ` Dr. David Alan Gilbert
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 32/39] COLO: Separate the process of saving/loading ram and device state zhanghailiang
2016-01-27 14:14 ` Dr. David Alan Gilbert
2016-01-30 10:23 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 33/39] COLO: Split qemu_savevm_state_begin out of checkpoint process zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 34/39] net/filter-buffer: Add default filter-buffer for each netdev zhanghailiang
2016-01-11 1:26 ` Hailiang Zhang
2016-01-19 1:46 ` Hailiang Zhang
2016-01-19 3:19 ` Jason Wang
2016-01-19 8:39 ` Hailiang Zhang
2016-01-20 2:39 ` Jason Wang
2016-01-20 7:14 ` Hailiang Zhang
2016-01-20 9:15 ` Jason Wang
2016-01-20 9:27 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 35/39] filter-buffer: Accept zero interval zhanghailiang
2016-01-19 3:21 ` Jason Wang
2016-01-19 8:40 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 36/39] filter-buffer: Introduce a helper function to enable/disable default filter zhanghailiang
2016-01-19 3:35 ` Jason Wang
2016-01-19 8:44 ` Hailiang Zhang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 37/39] filter-buffer: Introduce a helper function to release packets zhanghailiang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 38/39] colo: Use default buffer-filter to buffer and " zhanghailiang
2016-01-19 3:59 ` Jason Wang
2015-12-29 7:09 ` [Qemu-devel] [PATCH COLO-Frame v13 39/39] COLO: Add block replication into colo process zhanghailiang
2015-12-29 7:14 ` [Qemu-devel] [PATCH COLO-Frame v13 00/39] COarse-grain LOck-stepping(COLO) Virtual Machines for Non-stop Service (FT) Hailiang Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).