* [Qemu-devel] [Bug 1842925] [NEW] no batmap on convertion from qcow2 to vhd
@ 2019-09-05 13:25 Marat Salakhutdinov
2019-09-05 14:41 ` [Qemu-devel] [Bug 1842925] " Marat Salakhutdinov
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Marat Salakhutdinov @ 2019-09-05 13:25 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
we run following version of qemu-img:
$ qemu-img --version
qemu-img version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.41), Copyright (c) 2004-2008 Fabrice Bellard
$
Here is os version:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04.6 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.6 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
$
When we use qemu-img for conversion of qcow2 to vhd newly created file
doesnt show batmap summary when we run:
# vhd-util read -p -n centos76.vhd
VHD Footer Summary:
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Mon Mar 4 13:21:27 2019
Creator Application : 'qemu'
Creator version : Major: 5, Minor: 3
Creator OS : Windows
Original disk size : 8192 MB (8590417920 Bytes)
Current disk size : 8192 MB (8590417920 Bytes)
Geometry : Cyl: 16645, Hds: 16, Sctrs: 63
: = 8192 MB (8590417920 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff119|0xfffff119 (Good!)
UUID : 23772822-a66c-45a2-be37-8474604147c7
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Fri Dec 31 19:00:00 1999
Checksum : 0xfffff466|0xfffff466 (Good!)
#
I am not so strong in VHD format details and not exactly sure how batmap
is needed, but when I do conversion of qcow2 image by using vhd-util at
the end I get file with proper batmap summary.
In our environment we use CloudStack and Citrix and we use those
converted from qcow2 to vhd images as templates. In general there is no
problems, but whenever we create snapshot out of VM created from such
template vhd-util read command starts giving us error like below:
#
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Thu Aug 29 16:04:30 2019
Creator Application : 'tap'
Creator version : Major: 1, Minor: 3
Creator OS : Unknown!
Original disk size : 8194 MB (8592031744 Bytes)
Current disk size : 8194 MB (8592031744 Bytes)
Geometry : Cyl: 16648, Hds: 16, Sctrs: 63
: = 8193 MB (8591966208 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff074|0xfffff074 (Good!)
UUID : 2b3cac7d-16e1-4771-b8cd-bb8c7876c761
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Sat Jan 1 00:00:00 2000
Checksum : 0xfffff466|0xfffff466 (Good!)
failed to get batmap header
#
With the templates that show correct batmap summary that are created by
conversion of qcow2 image by vhd-util convert we don't have such
problems.
So I wanted to check with community if not existence of the batmap can
cause (be the reason of) this behaviour later on snapshot creation
stage? Should we always have batmap summary on output of vhd-util read
command?
** Affects: qemu
Importance: Undecided
Status: New
** Tags: qemu-img
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1842925
Title:
no batmap on convertion from qcow2 to vhd
Status in QEMU:
New
Bug description:
we run following version of qemu-img:
$ qemu-img --version
qemu-img version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.41), Copyright (c) 2004-2008 Fabrice Bellard
$
Here is os version:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04.6 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.6 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
$
When we use qemu-img for conversion of qcow2 to vhd newly created file
doesnt show batmap summary when we run:
# vhd-util read -p -n centos76.vhd
VHD Footer Summary:
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Mon Mar 4 13:21:27 2019
Creator Application : 'qemu'
Creator version : Major: 5, Minor: 3
Creator OS : Windows
Original disk size : 8192 MB (8590417920 Bytes)
Current disk size : 8192 MB (8590417920 Bytes)
Geometry : Cyl: 16645, Hds: 16, Sctrs: 63
: = 8192 MB (8590417920 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff119|0xfffff119 (Good!)
UUID : 23772822-a66c-45a2-be37-8474604147c7
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Fri Dec 31 19:00:00 1999
Checksum : 0xfffff466|0xfffff466 (Good!)
#
I am not so strong in VHD format details and not exactly sure how
batmap is needed, but when I do conversion of qcow2 image by using
vhd-util at the end I get file with proper batmap summary.
In our environment we use CloudStack and Citrix and we use those
converted from qcow2 to vhd images as templates. In general there is
no problems, but whenever we create snapshot out of VM created from
such template vhd-util read command starts giving us error like below:
#
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Thu Aug 29 16:04:30 2019
Creator Application : 'tap'
Creator version : Major: 1, Minor: 3
Creator OS : Unknown!
Original disk size : 8194 MB (8592031744 Bytes)
Current disk size : 8194 MB (8592031744 Bytes)
Geometry : Cyl: 16648, Hds: 16, Sctrs: 63
: = 8193 MB (8591966208 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff074|0xfffff074 (Good!)
UUID : 2b3cac7d-16e1-4771-b8cd-bb8c7876c761
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Sat Jan 1 00:00:00 2000
Checksum : 0xfffff466|0xfffff466 (Good!)
failed to get batmap header
#
With the templates that show correct batmap summary that are created
by conversion of qcow2 image by vhd-util convert we don't have such
problems.
So I wanted to check with community if not existence of the batmap can
cause (be the reason of) this behaviour later on snapshot creation
stage? Should we always have batmap summary on output of vhd-util read
command?
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1842925/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Qemu-devel] [Bug 1842925] Re: no batmap on convertion from qcow2 to vhd
2019-09-05 13:25 [Qemu-devel] [Bug 1842925] [NEW] no batmap on convertion from qcow2 to vhd Marat Salakhutdinov
@ 2019-09-05 14:41 ` Marat Salakhutdinov
2021-05-02 18:10 ` Thomas Huth
2021-07-02 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Marat Salakhutdinov @ 2019-09-05 14:41 UTC (permalink / raw)
To: qemu-devel
we use vhd-util from link
http://download.cloud.com.s3.amazonaws.com/tools/vhd-util
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1842925
Title:
no batmap on convertion from qcow2 to vhd
Status in QEMU:
New
Bug description:
we run following version of qemu-img:
$ qemu-img --version
qemu-img version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.41), Copyright (c) 2004-2008 Fabrice Bellard
$
Here is os version:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04.6 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.6 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
$
When we use qemu-img for conversion of qcow2 to vhd newly created file
doesnt show batmap summary when we run:
# vhd-util read -p -n centos76.vhd
VHD Footer Summary:
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Mon Mar 4 13:21:27 2019
Creator Application : 'qemu'
Creator version : Major: 5, Minor: 3
Creator OS : Windows
Original disk size : 8192 MB (8590417920 Bytes)
Current disk size : 8192 MB (8590417920 Bytes)
Geometry : Cyl: 16645, Hds: 16, Sctrs: 63
: = 8192 MB (8590417920 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff119|0xfffff119 (Good!)
UUID : 23772822-a66c-45a2-be37-8474604147c7
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Fri Dec 31 19:00:00 1999
Checksum : 0xfffff466|0xfffff466 (Good!)
#
I am not so strong in VHD format details and not exactly sure how
batmap is needed, but when I do conversion of qcow2 image by using
vhd-util at the end I get file with proper batmap summary.
In our environment we use CloudStack and Citrix and we use those
converted from qcow2 to vhd images as templates. In general there is
no problems, but whenever we create snapshot out of VM created from
such template vhd-util read command starts giving us error like below:
#
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Thu Aug 29 16:04:30 2019
Creator Application : 'tap'
Creator version : Major: 1, Minor: 3
Creator OS : Unknown!
Original disk size : 8194 MB (8592031744 Bytes)
Current disk size : 8194 MB (8592031744 Bytes)
Geometry : Cyl: 16648, Hds: 16, Sctrs: 63
: = 8193 MB (8591966208 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff074|0xfffff074 (Good!)
UUID : 2b3cac7d-16e1-4771-b8cd-bb8c7876c761
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Sat Jan 1 00:00:00 2000
Checksum : 0xfffff466|0xfffff466 (Good!)
failed to get batmap header
#
With the templates that show correct batmap summary that are created
by conversion of qcow2 image by vhd-util convert we don't have such
problems.
So I wanted to check with community if not existence of the batmap can
cause (be the reason of) this behaviour later on snapshot creation
stage? Should we always have batmap summary on output of vhd-util read
command?
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1842925/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bug 1842925] Re: no batmap on convertion from qcow2 to vhd
2019-09-05 13:25 [Qemu-devel] [Bug 1842925] [NEW] no batmap on convertion from qcow2 to vhd Marat Salakhutdinov
2019-09-05 14:41 ` [Qemu-devel] [Bug 1842925] " Marat Salakhutdinov
@ 2021-05-02 18:10 ` Thomas Huth
2021-07-02 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-02 18:10 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to
another system. For this we need to know which bugs are still valid
and which could be closed already. Thus we are setting older bugs to
"Incomplete" now.
If you still think this bug report here is valid, then please switch
the state back to "New" within the next 60 days, otherwise this report
will be marked as "Expired". Or please mark it as "Fix Released" if
the problem has been solved with a newer version of QEMU already.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1842925
Title:
no batmap on convertion from qcow2 to vhd
Status in QEMU:
Incomplete
Bug description:
we run following version of qemu-img:
$ qemu-img --version
qemu-img version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.41), Copyright (c) 2004-2008 Fabrice Bellard
$
Here is os version:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04.6 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.6 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
$
When we use qemu-img for conversion of qcow2 to vhd newly created file
doesnt show batmap summary when we run:
# vhd-util read -p -n centos76.vhd
VHD Footer Summary:
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Mon Mar 4 13:21:27 2019
Creator Application : 'qemu'
Creator version : Major: 5, Minor: 3
Creator OS : Windows
Original disk size : 8192 MB (8590417920 Bytes)
Current disk size : 8192 MB (8590417920 Bytes)
Geometry : Cyl: 16645, Hds: 16, Sctrs: 63
: = 8192 MB (8590417920 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff119|0xfffff119 (Good!)
UUID : 23772822-a66c-45a2-be37-8474604147c7
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Fri Dec 31 19:00:00 1999
Checksum : 0xfffff466|0xfffff466 (Good!)
#
I am not so strong in VHD format details and not exactly sure how
batmap is needed, but when I do conversion of qcow2 image by using
vhd-util at the end I get file with proper batmap summary.
In our environment we use CloudStack and Citrix and we use those
converted from qcow2 to vhd images as templates. In general there is
no problems, but whenever we create snapshot out of VM created from
such template vhd-util read command starts giving us error like below:
#
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Thu Aug 29 16:04:30 2019
Creator Application : 'tap'
Creator version : Major: 1, Minor: 3
Creator OS : Unknown!
Original disk size : 8194 MB (8592031744 Bytes)
Current disk size : 8194 MB (8592031744 Bytes)
Geometry : Cyl: 16648, Hds: 16, Sctrs: 63
: = 8193 MB (8591966208 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff074|0xfffff074 (Good!)
UUID : 2b3cac7d-16e1-4771-b8cd-bb8c7876c761
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Sat Jan 1 00:00:00 2000
Checksum : 0xfffff466|0xfffff466 (Good!)
failed to get batmap header
#
With the templates that show correct batmap summary that are created
by conversion of qcow2 image by vhd-util convert we don't have such
problems.
So I wanted to check with community if not existence of the batmap can
cause (be the reason of) this behaviour later on snapshot creation
stage? Should we always have batmap summary on output of vhd-util read
command?
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1842925/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bug 1842925] Re: no batmap on convertion from qcow2 to vhd
2019-09-05 13:25 [Qemu-devel] [Bug 1842925] [NEW] no batmap on convertion from qcow2 to vhd Marat Salakhutdinov
2019-09-05 14:41 ` [Qemu-devel] [Bug 1842925] " Marat Salakhutdinov
2021-05-02 18:10 ` Thomas Huth
@ 2021-07-02 4:17 ` Launchpad Bug Tracker
2 siblings, 0 replies; 4+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-02 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1842925
Title:
no batmap on convertion from qcow2 to vhd
Status in QEMU:
Expired
Bug description:
we run following version of qemu-img:
$ qemu-img --version
qemu-img version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.41), Copyright (c) 2004-2008 Fabrice Bellard
$
Here is os version:
$ cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04.6 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.6 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial
$
When we use qemu-img for conversion of qcow2 to vhd newly created file
doesnt show batmap summary when we run:
# vhd-util read -p -n centos76.vhd
VHD Footer Summary:
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Mon Mar 4 13:21:27 2019
Creator Application : 'qemu'
Creator version : Major: 5, Minor: 3
Creator OS : Windows
Original disk size : 8192 MB (8590417920 Bytes)
Current disk size : 8192 MB (8590417920 Bytes)
Geometry : Cyl: 16645, Hds: 16, Sctrs: 63
: = 8192 MB (8590417920 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff119|0xfffff119 (Good!)
UUID : 23772822-a66c-45a2-be37-8474604147c7
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Fri Dec 31 19:00:00 1999
Checksum : 0xfffff466|0xfffff466 (Good!)
#
I am not so strong in VHD format details and not exactly sure how
batmap is needed, but when I do conversion of qcow2 image by using
vhd-util at the end I get file with proper batmap summary.
In our environment we use CloudStack and Citrix and we use those
converted from qcow2 to vhd images as templates. In general there is
no problems, but whenever we create snapshot out of VM created from
such template vhd-util read command starts giving us error like below:
#
-------------------
Cookie : conectix
Features : (0x00000002) <RESV>
File format version : Major: 1, Minor: 0
Data offset : 512
Timestamp : Thu Aug 29 16:04:30 2019
Creator Application : 'tap'
Creator version : Major: 1, Minor: 3
Creator OS : Unknown!
Original disk size : 8194 MB (8592031744 Bytes)
Current disk size : 8194 MB (8592031744 Bytes)
Geometry : Cyl: 16648, Hds: 16, Sctrs: 63
: = 8193 MB (8591966208 Bytes)
Disk type : Dynamic hard disk
Checksum : 0xfffff074|0xfffff074 (Good!)
UUID : 2b3cac7d-16e1-4771-b8cd-bb8c7876c761
Saved state : No
Hidden : 0
VHD Header Summary:
-------------------
Cookie : cxsparse
Data offset (unusd) : 18446744073709
Table offset : 1536
Header version : 0x00010000
Max BAT size : 4097
Block size : 2097152 (2 MB)
Parent name :
Parent UUID : 00000000-0000-0000-0000-000000000000
Parent timestamp : Sat Jan 1 00:00:00 2000
Checksum : 0xfffff466|0xfffff466 (Good!)
failed to get batmap header
#
With the templates that show correct batmap summary that are created
by conversion of qcow2 image by vhd-util convert we don't have such
problems.
So I wanted to check with community if not existence of the batmap can
cause (be the reason of) this behaviour later on snapshot creation
stage? Should we always have batmap summary on output of vhd-util read
command?
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1842925/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-07-02 4:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-05 13:25 [Qemu-devel] [Bug 1842925] [NEW] no batmap on convertion from qcow2 to vhd Marat Salakhutdinov
2019-09-05 14:41 ` [Qemu-devel] [Bug 1842925] " Marat Salakhutdinov
2021-05-02 18:10 ` Thomas Huth
2021-07-02 4:17 ` Launchpad Bug Tracker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).