* [Bug 1881506] [NEW] TCG doesn't support a lot of features that should be supported
@ 2020-05-31 19:08 Ethin Probst
2021-05-06 17:21 ` [Bug 1881506] " Thomas Huth
2021-07-06 4:17 ` Launchpad Bug Tracker
0 siblings, 2 replies; 3+ messages in thread
From: Ethin Probst @ 2020-05-31 19:08 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
This is quite odd, and I'm not sure about how to get around it. I'm writing an OS in Rust and require APIC support. When I boot my kernel with qemu-system-x86_64, however, it dumps out a [lot] of warnings; it claims that TCG doesn't support FMA, X2APIC, AVX, F16C, AVX2, RDSEED, SHA-NI, FXSR-OPT, misalignsse, 3dnowprefetch, osvw, topoext, perfctr-core, clzero, xsaveerptr, ibpb, nrip-save, xsavec, and xsaves, but prints these warnings over 80 times before finally doing what I told it to do. Running QEMU 5.0.0 (unknown commit hash), as follows:
qemu-system-x86_64 -drive format=raw,file=target\x86_64-kernel-none\debug\bootimage-kernel.bin -serial stdio -no-reboot -hdb disk.img -s -m 4G -usb -rtc base=utc,clock=host -cpu EPYC-v3,+acpi,+apic,+rdrand,+rdseed,+sse,+sse2,+sse4.1,+sse4.2,+sse4a,+ssse3,+syscall,+x2apic -smp cpus=8 -soundhw all
I would run using HAXM, but my kernel requires RDRAND, and QEMU does not, to my knowledge, automatically support RDRAND (and I don't know how to enable it).
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1881506
Title:
TCG doesn't support a lot of features that should be supported
Status in QEMU:
New
Bug description:
This is quite odd, and I'm not sure about how to get around it. I'm writing an OS in Rust and require APIC support. When I boot my kernel with qemu-system-x86_64, however, it dumps out a [lot] of warnings; it claims that TCG doesn't support FMA, X2APIC, AVX, F16C, AVX2, RDSEED, SHA-NI, FXSR-OPT, misalignsse, 3dnowprefetch, osvw, topoext, perfctr-core, clzero, xsaveerptr, ibpb, nrip-save, xsavec, and xsaves, but prints these warnings over 80 times before finally doing what I told it to do. Running QEMU 5.0.0 (unknown commit hash), as follows:
qemu-system-x86_64 -drive format=raw,file=target\x86_64-kernel-none\debug\bootimage-kernel.bin -serial stdio -no-reboot -hdb disk.img -s -m 4G -usb -rtc base=utc,clock=host -cpu EPYC-v3,+acpi,+apic,+rdrand,+rdseed,+sse,+sse2,+sse4.1,+sse4.2,+sse4a,+ssse3,+syscall,+x2apic -smp cpus=8 -soundhw all
I would run using HAXM, but my kernel requires RDRAND, and QEMU does not, to my knowledge, automatically support RDRAND (and I don't know how to enable it).
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1881506/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bug 1881506] Re: TCG doesn't support a lot of features that should be supported
2020-05-31 19:08 [Bug 1881506] [NEW] TCG doesn't support a lot of features that should be supported Ethin Probst
@ 2021-05-06 17:21 ` Thomas Huth
2021-07-06 4:17 ` Launchpad Bug Tracker
1 sibling, 0 replies; 3+ messages in thread
From: Thomas Huth @ 2021-05-06 17:21 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently moving its bug tracking to another system.
For this we need to know which bugs are still valid and which could be
closed already. Thus we are setting older bugs to "Incomplete" now.
If the bug has already been fixed in the latest upstream version of QEMU,
then please close this ticket as "Fix released".
If it is not fixed yet and you think that this bug report here is still
valid, then you have two options:
1) If you already have an account on gitlab.com, please open a new ticket
for this problem in our new tracker here:
https://gitlab.com/qemu-project/qemu/-/issues
and then close this ticket here on Launchpad (or let it expire auto-
matically after 60 days). Please mention the URL of this bug ticket on
Launchpad in the new ticket on GitLab.
2) If you don't have an account on gitlab.com and don't intend to get
one, but still would like to keep this ticket opened, then please switch
the state back to "New" within the next 60 days (otherwise it will get
closed as "Expired"). We will then eventually migrate the ticket auto-
matically to the new system.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1881506
Title:
TCG doesn't support a lot of features that should be supported
Status in QEMU:
Incomplete
Bug description:
This is quite odd, and I'm not sure about how to get around it. I'm writing an OS in Rust and require APIC support. When I boot my kernel with qemu-system-x86_64, however, it dumps out a [lot] of warnings; it claims that TCG doesn't support FMA, X2APIC, AVX, F16C, AVX2, RDSEED, SHA-NI, FXSR-OPT, misalignsse, 3dnowprefetch, osvw, topoext, perfctr-core, clzero, xsaveerptr, ibpb, nrip-save, xsavec, and xsaves, but prints these warnings over 80 times before finally doing what I told it to do. Running QEMU 5.0.0 (unknown commit hash), as follows:
qemu-system-x86_64 -drive format=raw,file=target\x86_64-kernel-none\debug\bootimage-kernel.bin -serial stdio -no-reboot -hdb disk.img -s -m 4G -usb -rtc base=utc,clock=host -cpu EPYC-v3,+acpi,+apic,+rdrand,+rdseed,+sse,+sse2,+sse4.1,+sse4.2,+sse4a,+ssse3,+syscall,+x2apic -smp cpus=8 -soundhw all
I would run using HAXM, but my kernel requires RDRAND, and QEMU does not, to my knowledge, automatically support RDRAND (and I don't know how to enable it).
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1881506/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bug 1881506] Re: TCG doesn't support a lot of features that should be supported
2020-05-31 19:08 [Bug 1881506] [NEW] TCG doesn't support a lot of features that should be supported Ethin Probst
2021-05-06 17:21 ` [Bug 1881506] " Thomas Huth
@ 2021-07-06 4:17 ` Launchpad Bug Tracker
1 sibling, 0 replies; 3+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-06 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1881506
Title:
TCG doesn't support a lot of features that should be supported
Status in QEMU:
Expired
Bug description:
This is quite odd, and I'm not sure about how to get around it. I'm writing an OS in Rust and require APIC support. When I boot my kernel with qemu-system-x86_64, however, it dumps out a [lot] of warnings; it claims that TCG doesn't support FMA, X2APIC, AVX, F16C, AVX2, RDSEED, SHA-NI, FXSR-OPT, misalignsse, 3dnowprefetch, osvw, topoext, perfctr-core, clzero, xsaveerptr, ibpb, nrip-save, xsavec, and xsaves, but prints these warnings over 80 times before finally doing what I told it to do. Running QEMU 5.0.0 (unknown commit hash), as follows:
qemu-system-x86_64 -drive format=raw,file=target\x86_64-kernel-none\debug\bootimage-kernel.bin -serial stdio -no-reboot -hdb disk.img -s -m 4G -usb -rtc base=utc,clock=host -cpu EPYC-v3,+acpi,+apic,+rdrand,+rdseed,+sse,+sse2,+sse4.1,+sse4.2,+sse4a,+ssse3,+syscall,+x2apic -smp cpus=8 -soundhw all
I would run using HAXM, but my kernel requires RDRAND, and QEMU does not, to my knowledge, automatically support RDRAND (and I don't know how to enable it).
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1881506/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-07-06 4:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-31 19:08 [Bug 1881506] [NEW] TCG doesn't support a lot of features that should be supported Ethin Probst
2021-05-06 17:21 ` [Bug 1881506] " Thomas Huth
2021-07-06 4:17 ` Launchpad Bug Tracker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).