* [Bug 1898954] [NEW] x86 f1 opcode hangs qemu
@ 2020-10-08 0:21 pat leese
2021-05-09 14:28 ` [Bug 1898954] " Thomas Huth
2021-07-09 4:17 ` Launchpad Bug Tracker
0 siblings, 2 replies; 3+ messages in thread
From: pat leese @ 2020-10-08 0:21 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
I have qemu installed and running in linux and windows
in linux i execute the following simple code in real mode of cpu in my vm
90 nop
90 nop
90 nop
f1 ;this should conjure up my interrupt handler from ivt int 1
--------- end of code ----
it works properly in vbox,qemu linux,and even in my boot loder
on a real platform
it doeas not work fine in windows 10 (32 bit efi) based qemu
---
all of the below was retyped there may be typo
so onwards to the flawed software
********** for qemu-system-x86_64.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
********** for qemu-system-i386.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
***********************************************
my startup code is
"d:\programs\qemu\qemu-system-x86_64.exe" -m 16M -boot a -fda "d:\floppy.img" -cpu Nehalem -machine pc
---
also same flaw if i change above section to
"d:\programs\qemu\qemu-system-i386.exe"
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1898954
Title:
x86 f1 opcode hangs qemu
Status in QEMU:
New
Bug description:
I have qemu installed and running in linux and windows
in linux i execute the following simple code in real mode of cpu in my vm
90 nop
90 nop
90 nop
f1 ;this should conjure up my interrupt handler from ivt int 1
--------- end of code ----
it works properly in vbox,qemu linux,and even in my boot loder
on a real platform
it doeas not work fine in windows 10 (32 bit efi) based qemu
---
all of the below was retyped there may be typo
so onwards to the flawed software
********** for qemu-system-x86_64.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
********** for qemu-system-i386.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
***********************************************
my startup code is
"d:\programs\qemu\qemu-system-x86_64.exe" -m 16M -boot a -fda "d:\floppy.img" -cpu Nehalem -machine pc
---
also same flaw if i change above section to
"d:\programs\qemu\qemu-system-i386.exe"
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1898954/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread* [Bug 1898954] Re: x86 f1 opcode hangs qemu
2020-10-08 0:21 [Bug 1898954] [NEW] x86 f1 opcode hangs qemu pat leese
@ 2021-05-09 14:28 ` Thomas Huth
2021-07-09 4:17 ` Launchpad Bug Tracker
1 sibling, 0 replies; 3+ messages in thread
From: Thomas Huth @ 2021-05-09 14:28 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently moving its bug tracking to another system.
For this we need to know which bugs are still valid and which could be
closed already. Thus we are setting the bug state to "Incomplete" now.
If the bug has already been fixed in the latest upstream version of QEMU,
then please close this ticket as "Fix released".
If it is not fixed yet and you think that this bug report here is still
valid, then you have two options:
1) If you already have an account on gitlab.com, please open a new ticket
for this problem in our new tracker here:
https://gitlab.com/qemu-project/qemu/-/issues
and then close this ticket here on Launchpad (or let it expire auto-
matically after 60 days). Please mention the URL of this bug ticket on
Launchpad in the new ticket on GitLab.
2) If you don't have an account on gitlab.com and don't intend to get
one, but still would like to keep this ticket opened, then please switch
the state back to "New" or "Confirmed" within the next 60 days (other-
wise it will get closed as "Expired"). We will then eventually migrate
the ticket automatically to the new system (but you won't be the reporter
of the bug in the new system and thus you won't get notified on changes
anymore).
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1898954
Title:
x86 f1 opcode hangs qemu
Status in QEMU:
Incomplete
Bug description:
I have qemu installed and running in linux and windows
in linux i execute the following simple code in real mode of cpu in my vm
90 nop
90 nop
90 nop
f1 ;this should conjure up my interrupt handler from ivt int 1
--------- end of code ----
it works properly in vbox,qemu linux,and even in my boot loder
on a real platform
it doeas not work fine in windows 10 (32 bit efi) based qemu
---
all of the below was retyped there may be typo
so onwards to the flawed software
********** for qemu-system-x86_64.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
********** for qemu-system-i386.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
***********************************************
my startup code is
"d:\programs\qemu\qemu-system-x86_64.exe" -m 16M -boot a -fda "d:\floppy.img" -cpu Nehalem -machine pc
---
also same flaw if i change above section to
"d:\programs\qemu\qemu-system-i386.exe"
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1898954/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread* [Bug 1898954] Re: x86 f1 opcode hangs qemu
2020-10-08 0:21 [Bug 1898954] [NEW] x86 f1 opcode hangs qemu pat leese
2021-05-09 14:28 ` [Bug 1898954] " Thomas Huth
@ 2021-07-09 4:17 ` Launchpad Bug Tracker
1 sibling, 0 replies; 3+ messages in thread
From: Launchpad Bug Tracker @ 2021-07-09 4:17 UTC (permalink / raw)
To: qemu-devel
[Expired for QEMU because there has been no activity for 60 days.]
** Changed in: qemu
Status: Incomplete => Expired
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1898954
Title:
x86 f1 opcode hangs qemu
Status in QEMU:
Expired
Bug description:
I have qemu installed and running in linux and windows
in linux i execute the following simple code in real mode of cpu in my vm
90 nop
90 nop
90 nop
f1 ;this should conjure up my interrupt handler from ivt int 1
--------- end of code ----
it works properly in vbox,qemu linux,and even in my boot loder
on a real platform
it doeas not work fine in windows 10 (32 bit efi) based qemu
---
all of the below was retyped there may be typo
so onwards to the flawed software
********** for qemu-system-x86_64.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
********** for qemu-system-i386.exe **********
info version
4.2.0v4.2.0.11797-g2890edc853-dirty
***********************************************
my startup code is
"d:\programs\qemu\qemu-system-x86_64.exe" -m 16M -boot a -fda "d:\floppy.img" -cpu Nehalem -machine pc
---
also same flaw if i change above section to
"d:\programs\qemu\qemu-system-i386.exe"
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1898954/+subscriptions
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-07-09 4:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-08 0:21 [Bug 1898954] [NEW] x86 f1 opcode hangs qemu pat leese
2021-05-09 14:28 ` [Bug 1898954] " Thomas Huth
2021-07-09 4:17 ` Launchpad Bug Tracker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).