* [Bug 1863200] [NEW] Reconnect failed with loopback virtio1.1 server mode test
@ 2020-02-14 3:46 xuan
2021-05-05 15:15 ` [Bug 1863200] " Thomas Huth
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: xuan @ 2020-02-14 3:46 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
Issue discription:
Packed ring server mode is a new feature to enable the virtio-user or virtio-pmd(in VM) as the server, vhost as the client, then when the vhost-user is killed then re-launched, the vhost-user can connect back to virtio-user/virtio-pmd again. Test with dpdk 20.02 ,virtio-pmd loopback reconnect from vhost-user failed.
Test Environment:
DPDK version: DPDK v20.02
Other software versions: virtio1.1
Qemu versions:4.2.0
OS: Linux 4.15.0-20-generic
Compiler: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Hardware platform: R2208WFTZSR.
The reproduce step is :
Test Case: vhost-user/virtio-pmd loopback reconnect from vhost-user
===============================================================
Flow: Vhost-user --> Virtio --> Vhost-user
1. Launch vhost-user with client mode by below commands::
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
2. Start VM with 1 virtio device, and set the qemu as server mode::
./qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 100 -m 8G \
-object memory-backend-file,id=mem,size=8192M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/xuan/dpdk_project/shell/u18.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=/tmp/vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-vnc :10
3. On VM, bind virtio net to igb_uio and run testpmd::
./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. Send packets by vhost-user, check if packets can be RX/TX with
virtio-pmd::
testpmd>start tx_first 32
testpmd>show port stats all
5. On host, quit vhost-user, then re-launch the vhost-user with below
command::
testpmd>quit
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start tx_first 32
6. Check if the reconnection can work, still send packets by vhost-user,
check if packets can be RX/TX with virtio-pmd::
testpmd>show port stats all
Expected result::
After the vhost-user is killed then re-launched, the VM can connect back
to vhost-user again with throughput.
Real result::
After the vhost-user is killed then re-launched, no throughput with PVP.
Analysis::
QEMU has its own way to handle reconnect function for virtio server
mode. However, for packed ring, when reconnecting to virtio, vhost
cannot get the status of descriptors via the descriptor ring. This bug
is caused since the reconnection for packed ring need additional reset
operation.
** Affects: qemu
Importance: Undecided
Status: New
** Tags: mode packed ring server
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1863200
Title:
Reconnect failed with loopback virtio1.1 server mode test
Status in QEMU:
New
Bug description:
Issue discription:
Packed ring server mode is a new feature to enable the virtio-user or virtio-pmd(in VM) as the server, vhost as the client, then when the vhost-user is killed then re-launched, the vhost-user can connect back to virtio-user/virtio-pmd again. Test with dpdk 20.02 ,virtio-pmd loopback reconnect from vhost-user failed.
Test Environment:
DPDK version: DPDK v20.02
Other software versions: virtio1.1
Qemu versions:4.2.0
OS: Linux 4.15.0-20-generic
Compiler: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Hardware platform: R2208WFTZSR.
The reproduce step is :
Test Case: vhost-user/virtio-pmd loopback reconnect from vhost-user
===============================================================
Flow: Vhost-user --> Virtio --> Vhost-user
1. Launch vhost-user with client mode by below commands::
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
2. Start VM with 1 virtio device, and set the qemu as server mode::
./qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 100 -m 8G \
-object memory-backend-file,id=mem,size=8192M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/xuan/dpdk_project/shell/u18.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=/tmp/vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-vnc :10
3. On VM, bind virtio net to igb_uio and run testpmd::
./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. Send packets by vhost-user, check if packets can be RX/TX with
virtio-pmd::
testpmd>start tx_first 32
testpmd>show port stats all
5. On host, quit vhost-user, then re-launch the vhost-user with below
command::
testpmd>quit
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start tx_first 32
6. Check if the reconnection can work, still send packets by vhost-
user, check if packets can be RX/TX with virtio-pmd::
testpmd>show port stats all
Expected result::
After the vhost-user is killed then re-launched, the VM can connect
back to vhost-user again with throughput.
Real result::
After the vhost-user is killed then re-launched, no throughput with
PVP.
Analysis::
QEMU has its own way to handle reconnect function for virtio server
mode. However, for packed ring, when reconnecting to virtio, vhost
cannot get the status of descriptors via the descriptor ring. This bug
is caused since the reconnection for packed ring need additional reset
operation.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1863200/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bug 1863200] Re: Reconnect failed with loopback virtio1.1 server mode test
2020-02-14 3:46 [Bug 1863200] [NEW] Reconnect failed with loopback virtio1.1 server mode test xuan
@ 2021-05-05 15:15 ` Thomas Huth
2021-05-07 1:59 ` xuan
2021-05-10 7:43 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-05 15:15 UTC (permalink / raw)
To: qemu-devel
The QEMU project is currently considering to move its bug tracking to
another system. For this we need to know which bugs are still valid
and which could be closed already. Thus we are setting older bugs to
"Incomplete" now.
If you still think this bug report here is valid, then please switch
the state back to "New" within the next 60 days, otherwise this report
will be marked as "Expired". Or please mark it as "Fix Released" if
the problem has been solved with a newer version of QEMU already.
Thank you and sorry for the inconvenience.
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1863200
Title:
Reconnect failed with loopback virtio1.1 server mode test
Status in QEMU:
Incomplete
Bug description:
Issue discription:
Packed ring server mode is a new feature to enable the virtio-user or virtio-pmd(in VM) as the server, vhost as the client, then when the vhost-user is killed then re-launched, the vhost-user can connect back to virtio-user/virtio-pmd again. Test with dpdk 20.02 ,virtio-pmd loopback reconnect from vhost-user failed.
Test Environment:
DPDK version: DPDK v20.02
Other software versions: virtio1.1
Qemu versions:4.2.0
OS: Linux 4.15.0-20-generic
Compiler: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Hardware platform: R2208WFTZSR.
The reproduce step is :
Test Case: vhost-user/virtio-pmd loopback reconnect from vhost-user
===============================================================
Flow: Vhost-user --> Virtio --> Vhost-user
1. Launch vhost-user with client mode by below commands::
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
2. Start VM with 1 virtio device, and set the qemu as server mode::
./qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 100 -m 8G \
-object memory-backend-file,id=mem,size=8192M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/xuan/dpdk_project/shell/u18.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=/tmp/vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-vnc :10
3. On VM, bind virtio net to igb_uio and run testpmd::
./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. Send packets by vhost-user, check if packets can be RX/TX with
virtio-pmd::
testpmd>start tx_first 32
testpmd>show port stats all
5. On host, quit vhost-user, then re-launch the vhost-user with below
command::
testpmd>quit
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start tx_first 32
6. Check if the reconnection can work, still send packets by vhost-
user, check if packets can be RX/TX with virtio-pmd::
testpmd>show port stats all
Expected result::
After the vhost-user is killed then re-launched, the VM can connect
back to vhost-user again with throughput.
Real result::
After the vhost-user is killed then re-launched, no throughput with
PVP.
Analysis::
QEMU has its own way to handle reconnect function for virtio server
mode. However, for packed ring, when reconnecting to virtio, vhost
cannot get the status of descriptors via the descriptor ring. This bug
is caused since the reconnection for packed ring need additional reset
operation.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1863200/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bug 1863200] Re: Reconnect failed with loopback virtio1.1 server mode test
2020-02-14 3:46 [Bug 1863200] [NEW] Reconnect failed with loopback virtio1.1 server mode test xuan
2021-05-05 15:15 ` [Bug 1863200] " Thomas Huth
@ 2021-05-07 1:59 ` xuan
2021-05-10 7:43 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: xuan @ 2021-05-07 1:59 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: Incomplete => New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1863200
Title:
Reconnect failed with loopback virtio1.1 server mode test
Status in QEMU:
New
Bug description:
Issue discription:
Packed ring server mode is a new feature to enable the virtio-user or virtio-pmd(in VM) as the server, vhost as the client, then when the vhost-user is killed then re-launched, the vhost-user can connect back to virtio-user/virtio-pmd again. Test with dpdk 20.02 ,virtio-pmd loopback reconnect from vhost-user failed.
Test Environment:
DPDK version: DPDK v20.02
Other software versions: virtio1.1
Qemu versions:4.2.0
OS: Linux 4.15.0-20-generic
Compiler: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Hardware platform: R2208WFTZSR.
The reproduce step is :
Test Case: vhost-user/virtio-pmd loopback reconnect from vhost-user
===============================================================
Flow: Vhost-user --> Virtio --> Vhost-user
1. Launch vhost-user with client mode by below commands::
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
2. Start VM with 1 virtio device, and set the qemu as server mode::
./qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 100 -m 8G \
-object memory-backend-file,id=mem,size=8192M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/xuan/dpdk_project/shell/u18.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=/tmp/vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-vnc :10
3. On VM, bind virtio net to igb_uio and run testpmd::
./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. Send packets by vhost-user, check if packets can be RX/TX with
virtio-pmd::
testpmd>start tx_first 32
testpmd>show port stats all
5. On host, quit vhost-user, then re-launch the vhost-user with below
command::
testpmd>quit
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start tx_first 32
6. Check if the reconnection can work, still send packets by vhost-
user, check if packets can be RX/TX with virtio-pmd::
testpmd>show port stats all
Expected result::
After the vhost-user is killed then re-launched, the VM can connect
back to vhost-user again with throughput.
Real result::
After the vhost-user is killed then re-launched, no throughput with
PVP.
Analysis::
QEMU has its own way to handle reconnect function for virtio server
mode. However, for packed ring, when reconnecting to virtio, vhost
cannot get the status of descriptors via the descriptor ring. This bug
is caused since the reconnection for packed ring need additional reset
operation.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1863200/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Bug 1863200] Re: Reconnect failed with loopback virtio1.1 server mode test
2020-02-14 3:46 [Bug 1863200] [NEW] Reconnect failed with loopback virtio1.1 server mode test xuan
2021-05-05 15:15 ` [Bug 1863200] " Thomas Huth
2021-05-07 1:59 ` xuan
@ 2021-05-10 7:43 ` Thomas Huth
2 siblings, 0 replies; 4+ messages in thread
From: Thomas Huth @ 2021-05-10 7:43 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/248
** Changed in: qemu
Status: New => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #248
https://gitlab.com/qemu-project/qemu/-/issues/248
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1863200
Title:
Reconnect failed with loopback virtio1.1 server mode test
Status in QEMU:
Expired
Bug description:
Issue discription:
Packed ring server mode is a new feature to enable the virtio-user or virtio-pmd(in VM) as the server, vhost as the client, then when the vhost-user is killed then re-launched, the vhost-user can connect back to virtio-user/virtio-pmd again. Test with dpdk 20.02 ,virtio-pmd loopback reconnect from vhost-user failed.
Test Environment:
DPDK version: DPDK v20.02
Other software versions: virtio1.1
Qemu versions:4.2.0
OS: Linux 4.15.0-20-generic
Compiler: gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
Hardware platform: R2208WFTZSR.
The reproduce step is :
Test Case: vhost-user/virtio-pmd loopback reconnect from vhost-user
===============================================================
Flow: Vhost-user --> Virtio --> Vhost-user
1. Launch vhost-user with client mode by below commands::
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
2. Start VM with 1 virtio device, and set the qemu as server mode::
./qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 100 -m 8G \
-object memory-backend-file,id=mem,size=8192M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/xuan/dpdk_project/shell/u18.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=/tmp/vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-vnc :10
3. On VM, bind virtio net to igb_uio and run testpmd::
./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. Send packets by vhost-user, check if packets can be RX/TX with
virtio-pmd::
testpmd>start tx_first 32
testpmd>show port stats all
5. On host, quit vhost-user, then re-launch the vhost-user with below
command::
testpmd>quit
./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=/tmp/vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start tx_first 32
6. Check if the reconnection can work, still send packets by vhost-
user, check if packets can be RX/TX with virtio-pmd::
testpmd>show port stats all
Expected result::
After the vhost-user is killed then re-launched, the VM can connect
back to vhost-user again with throughput.
Real result::
After the vhost-user is killed then re-launched, no throughput with
PVP.
Analysis::
QEMU has its own way to handle reconnect function for virtio server
mode. However, for packed ring, when reconnecting to virtio, vhost
cannot get the status of descriptors via the descriptor ring. This bug
is caused since the reconnection for packed ring need additional reset
operation.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1863200/+subscriptions
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-10 7:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14 3:46 [Bug 1863200] [NEW] Reconnect failed with loopback virtio1.1 server mode test xuan
2021-05-05 15:15 ` [Bug 1863200] " Thomas Huth
2021-05-07 1:59 ` xuan
2021-05-10 7:43 ` Thomas Huth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).