[Qemu-devel] [Bug 1839807] [NEW] Snapshots freeze guest Sabrelite IMX.6 board

[Qemu-devel] [Bug 1839807] [NEW] Snapshots freeze guest Sabrelite IMX.6 board

[Al Sn]

Public bug reported:

Hello,

I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
It seems that I am able to take a snapshot but loading the snapshot fails.

For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
The problem occurs only with that one particular board.

My environment is:
Ubuntu 18.04
QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
The kernel and device tree used for the board was 5.1.14 version from kernel.org

The file system was build from imx_v6_v7_defconfig config in buildroot
as and sd card image.

Problem:

Loading snapshot stops the whole machine and it's impossible to resume
it.

Steps to reproduce problem:

1.      I converted the sdcard.img built from the buildroot to qcow2
using command qemu-img convert -f raw -O qcow2 sdcard.img sdcard.qcow2,
since the raw doesn't support snapshots.

2.      I start QEMU with a command
./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

3.      I run a simple program which print characters to the console in
the background and add some files in user directory, to differ from
original image.

4.      I switch to QEMU monitor, and type “savevm <name>”.
When I type “info snapshots”, the snapshot is listed.
So I assume it was saved correctly.

5.      Then I switch back to Linux console from monitor, remove the
added files and stop the background printing process.

6.      I switch back to monitor and I'm trying now to load the snapshot
by “loadvm <name>” command.

That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
Typing “cont” doesn’t help.
It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.


What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

It looks like loading the snapshots works for restoring disk space but
it fails for restoring the running processes.

Due to the answer on QEMU mailing list
(https://lists.nongnu.org/archive/html/qemu-
discuss/2019-08/msg00016.html) it is QEMUs bug.

** Affects: qemu
     Importance: Undecided
         Status: New


** Tags: snapshots

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  New

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Qemu-devel] [Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Peter Maydell]

The underlying cause of this is that we're not migrating the Secure
banked cp15 register contents. So boards which don't enable TrustZone or
where the guest runs in the NonSecure state (like the virt board, etc)
can save/restore fine, but since the imx6 happens to run the guest in
the Secure state it gets hit by the bug and its MMU setup etc is
completely broken on restore.

This is a bug I knew about (I mentioned it in LP:1739378 comment #5),
but I've forgotten the detail of why it happens and don't seem to have
written it down, so I'm going to have to think it through again...


** Changed in: qemu
       Status: New => Confirmed

** Tags added: arm

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Confirmed

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Qemu-devel] [Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Al Sn]

Hello again,

I have tried to disable TrustZone using argument mentioned in comment #5
by changing -M sabrelite to -M sabrelite,secure=off, but I get error
"qemu-system-arm: Property '.secure' not found". It works with virt
though. Is there any other way to disable it?

Thank you,
...

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Confirmed

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Qemu-devel] [Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Peter Maydell]

That property doesn't exist for the sabrelite board, it's only on some
of the others like vexpress or virt.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Confirmed

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Thomas Huth]

The QEMU project is currently moving its bug tracking to another system.
For this we need to know which bugs are still valid and which could be
closed already. Thus we are setting the bug state to "Incomplete" now.

If the bug has already been fixed in the latest upstream version of QEMU,
then please close this ticket as "Fix released".

If it is not fixed yet and you think that this bug report here is still
valid, then you have two options:

1) If you already have an account on gitlab.com, please open a new ticket
for this problem in our new tracker here:

    https://gitlab.com/qemu-project/qemu/-/issues

and then close this ticket here on Launchpad (or let it expire auto-
matically after 60 days). Please mention the URL of this bug ticket on
Launchpad in the new ticket on GitLab.

2) If you don't have an account on gitlab.com and don't intend to get
one, but still would like to keep this ticket opened, then please switch
the state back to "New" or "Confirmed" within the next 60 days (other-
wise it will get closed as "Expired"). We will then eventually migrate
the ticket automatically to the new system (but you won't be the reporter
of the bug in the new system and thus you won't get notified on changes
anymore).

Thank you and sorry for the inconvenience.


** Changed in: qemu
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Incomplete

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Launchpad Bug Tracker]

[Expired for QEMU because there has been no activity for 60 days.]

** Changed in: qemu
       Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Expired

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Peter Maydell]

Save/restore with TrustZone enabled is stil broken.


** Changed in: qemu
       Status: Expired => New

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  New

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions

[Bug 1839807] Re: Snapshots freeze guest Sabrelite IMX.6 board

[Thomas Huth]

This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:

 https://gitlab.com/qemu-project/qemu/-/issues/467


** Changed in: qemu
       Status: New => Expired

** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #467
   https://gitlab.com/qemu-project/qemu/-/issues/467

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1839807

Title:
  Snapshots freeze guest Sabrelite IMX.6 board

Status in QEMU:
  Expired

Bug description:
  Hello,

  I'm trying to take and restore  a snapshot with the whole system state of the Sabrelite IMX.6 board running on QEMU with commands savevm/loadvm.
  It seems that I am able to take a snapshot but loading the snapshot fails.

  For comparison I checked out snapshots on 32bit ARM Virt with Debian as well as on the Versatilepb board with a bare metal application and it works fine.
  The problem occurs only with that one particular board.

  My environment is:
  Ubuntu 18.04
  QEMU 3.0.1 (I see the same issue in QEMU 4.0.0 as well)
  The kernel and device tree used for the board was 5.1.14 version from kernel.org

  The file system was build from imx_v6_v7_defconfig config in buildroot
  as and sd card image.

  Problem:

  Loading snapshot stops the whole machine and it's impossible to resume
  it.

  Steps to reproduce problem:

  1.      I converted the sdcard.img built from the buildroot to qcow2
  using command qemu-img convert -f raw -O qcow2 sdcard.img
  sdcard.qcow2, since the raw doesn't support snapshots.

  2.      I start QEMU with a command
  ./arm-softmmu/qemu-system-arm -m 512 -M sabrelite -kernel zImage -append "rootfstype=ext4 root=/dev/mmcblk2p2 rw rootwait" -rtc base=localtime,clock=vm -dtb imx6dl-sabresd.dtb -drive file=sdcard.qcow2,index=2,format=qcow2,id=mycard -device sd-card,drive=mycard -nographic -net nic -net user

  3.      I run a simple program which print characters to the console
  in the background and add some files in user directory, to differ from
  original image.

  4.      I switch to QEMU monitor, and type “savevm <name>”.
  When I type “info snapshots”, the snapshot is listed.
  So I assume it was saved correctly.

  5.      Then I switch back to Linux console from monitor, remove the
  added files and stop the background printing process.

  6.      I switch back to monitor and I'm trying now to load the
  snapshot by “loadvm <name>” command.

  That’s where the problem occurs. QEMU stops and I can't switch back from monitor to Linux.
  Typing “cont” doesn’t help.
  It seems like the simulation has freezed. CPU usage on my Laptop machine equals 100% until I exit QEMU.

  
  What’s interesting when I exit the QEMU and then start it again the Linux boots and after it reaches the command prompt I can see the files which were removed after saving the snapshot.

  It looks like loading the snapshots works for restoring disk space but
  it fails for restoring the running processes.

  Due to the answer on QEMU mailing list
  (https://lists.nongnu.org/archive/html/qemu-
  discuss/2019-08/msg00016.html) it is QEMUs bug.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1839807/+subscriptions