* [Qemu-devel] [Bug 1471904] [NEW] qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
@ 2015-07-06 17:27 Uwe Lienig
2018-06-21 14:37 ` [Qemu-devel] [Bug 1471904] " Thomas Huth
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Uwe Lienig @ 2015-07-06 17:27 UTC (permalink / raw)
To: qemu-devel
Public bug reported:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter is
correctly detected. I don't know, if these adapter where equipped with
some special ROM. I thought of installing NeXTStep on a SCSI system due
to the IDE problems already known under #1276879. If necessary I would
use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
New
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
2015-07-06 17:27 [Qemu-devel] [Bug 1471904] [NEW] qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 Uwe Lienig
@ 2018-06-21 14:37 ` Thomas Huth
2018-06-26 16:23 ` Uwe Lienig
2018-06-26 16:43 ` Thomas Huth
2021-05-04 5:45 ` Thomas Huth
2 siblings, 1 reply; 6+ messages in thread
From: Thomas Huth @ 2018-06-21 14:37 UTC (permalink / raw)
To: qemu-devel
Looking through old bug tickets... can you still reproduce this issue
with the latest version of QEMU? Or could we close this ticket nowadays?
** Changed in: qemu
Status: New => Incomplete
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
Incomplete
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
2018-06-21 14:37 ` [Qemu-devel] [Bug 1471904] " Thomas Huth
@ 2018-06-26 16:23 ` Uwe Lienig
2018-06-26 17:28 ` BALATON Zoltan
0 siblings, 1 reply; 6+ messages in thread
From: Uwe Lienig @ 2018-06-26 16:23 UTC (permalink / raw)
To: qemu-devel
Am 21.06.2018 um 16:37 schrieb Thomas Huth:
Dear Thomas,
the issue is still reproducible. I'm still eager to run this old beast
because of an old database application that has not been converted to
our new platform. There is an old NeXTStep Black Hardware that is
running the sybase database. The frontend runs under NeXTStep intel.
Using qemu would allow to remove some old i486 NeXTStep systems.
The error looks like:
qemu-system-i386: Trying to execute code outside RAM or ROM at 0xc01754a8
This usually means one of the following happened:
(1) You told QEMU to execute a kernel for the wrong machine type, and it
crashed on startup (eg trying to run a raspberry pi kernel on a
versatilepb QEMU machine)
(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU
executed a ROM full of no-op instructions until it fell off the end
(3) Your guest kernel has a bug and crashed by jumping off into nowhere
This is almost always one of the first two, so check your command line
and that you are using the right type of kernel for this machine.
If you think option (3) is likely then you can try debugging your guest
with the -d debug options; in particular -d guest_errors will cause the
log to include a dump of the guest register state at this point.
Execution cannot continue; stopping here.
Best regards
Uwe
> Looking through old bug tickets... can you still reproduce this issue
> with the latest version of QEMU? Or could we close this ticket nowadays?
>
>
> ** Changed in: qemu
> Status: New => Incomplete
>
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
Incomplete
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
2015-07-06 17:27 [Qemu-devel] [Bug 1471904] [NEW] qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 Uwe Lienig
2018-06-21 14:37 ` [Qemu-devel] [Bug 1471904] " Thomas Huth
@ 2018-06-26 16:43 ` Thomas Huth
2021-05-04 5:45 ` Thomas Huth
2 siblings, 0 replies; 6+ messages in thread
From: Thomas Huth @ 2018-06-26 16:43 UTC (permalink / raw)
To: qemu-devel
** Changed in: qemu
Status: Incomplete => Triaged
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
Triaged
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
2018-06-26 16:23 ` Uwe Lienig
@ 2018-06-26 17:28 ` BALATON Zoltan
0 siblings, 0 replies; 6+ messages in thread
From: BALATON Zoltan @ 2018-06-26 17:28 UTC (permalink / raw)
To: Bug 1471904; +Cc: qemu-devel
On Tue, 26 Jun 2018, Uwe Lienig wrote:
> the issue is still reproducible. I'm still eager to run this old beast
> because of an old database application that has not been converted to
> our new platform. There is an old NeXTStep Black Hardware that is
> running the sybase database. The frontend runs under NeXTStep intel.
> Using qemu would allow to remove some old i486 NeXTStep systems.
This reminds me to this:
http://lists.nongnu.org/archive/html/qemu-devel/2012-09/msg00280.html
my reply to a patch submitted on list a few years ago that was needed to
fix OpenStep (which might be the same for NeXTStep too) but at the end
after several iterations it was not accepted due to fear that it may break
backwards migration which was deemed more important than supporting old
guests at the time. Maybe this could be reconsidered now if it fixes your
problem or at least you can have a local fix.
The actual patch needed is just this:
http://lists.nongnu.org/archive/html/qemu-devel/2012-12/msg02360.html
from this series:
http://lists.nongnu.org/archive/html/qemu-devel/2012-12/msg02356.html
which is the last version I've found. You can discover the whole story and
a lot of background info by searching the qemu-devel list archives for
"Microport UNIX". For KVM, I think another set of patches are needed (or
one of those patches) that are linked from one of those messages
somewhere but I don't remember that.
This may not fix your SCSI problems but could be relevant to the other IDE
bug mentioned in this bug but it was easier to reply to this email than
trying to log into launchpad. Sorry for the noise if this turns out not to
be relevant.
Regards,
BALATON Zoltan
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Bug 1471904] Re: qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974
2015-07-06 17:27 [Qemu-devel] [Bug 1471904] [NEW] qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 Uwe Lienig
2018-06-21 14:37 ` [Qemu-devel] [Bug 1471904] " Thomas Huth
2018-06-26 16:43 ` Thomas Huth
@ 2021-05-04 5:45 ` Thomas Huth
2 siblings, 0 replies; 6+ messages in thread
From: Thomas Huth @ 2021-05-04 5:45 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/116
** Changed in: qemu
Status: Triaged => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #116
https://gitlab.com/qemu-project/qemu/-/issues/116
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471904
Title:
qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter
am53c974
Status in QEMU:
Expired
Bug description:
I try to do a fresh install of NeXTStep 3.3 on qemu. After all install
floppies are successfully read in, the installation shall start, but
aborts right away. During installation process the SCSI host adapter
is correctly detected. I don't know, if these adapter where equipped
with some special ROM. I thought of installing NeXTStep on a SCSI
system due to the IDE problems already known under #1276879. If
necessary I would use gdb to track more into this.
System info:
Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux
NAME=openSUSE
VERSION="13.1 (Bottle)"
VERSION_ID="13.1"
PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)"
qemu commandline parameter:
/usr/bin/qemu-system-i386 \
-cpu pentium \
-monitor stdio \
-k de \
-vga cirrus \
-m 128 \
-localtime \
-drive \
file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \
-drive \
file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \
-drive \
file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \
-net \
none \
-device \
am53c974,id=AMD0 \
-device \
scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \
-device \
scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off
qemu error message:
qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8
EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1
ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c
EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-]
SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 001c9a58 000000ff
IDT= 001c9bac 000007ff
CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
CCS=00000001 CCD=0000000c CCO=INCL
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471904/+subscriptions
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-04 6:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-06 17:27 [Qemu-devel] [Bug 1471904] [NEW] qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 Uwe Lienig
2018-06-21 14:37 ` [Qemu-devel] [Bug 1471904] " Thomas Huth
2018-06-26 16:23 ` Uwe Lienig
2018-06-26 17:28 ` BALATON Zoltan
2018-06-26 16:43 ` Thomas Huth
2021-05-04 5:45 ` Thomas Huth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).