[Qemu-devel] [PATCH v7 00/15] Add support for io_uring

[Qemu-devel] [PATCH v7 00/15] Add support for io_uring

[Aarushi Mehta]

This patch series adds support for the newly developed io_uring Linux AIO
interface. Linux io_uring is faster than Linux's AIO asynchronous I/O code,
offers efficient buffered asynchronous I/O support, the ability to do I/O
without performing a system call via polled I/O, and other efficiency enhancements.

Testing it requires a host kernel (5.1+) and the liburing library.
Use the option -drive aio=io_uring to enable it.

Benchmarks for the system at https://github.com/rooshm/benchmarks
io_uring has similar performance as libaio but supports cache=writeback.
Further performance enhancement will be implemented

There is currently an -EIO output when guests are booted from io_uring on ext4,
the error is reported upstream.
https://lore.kernel.org/linux-block/20190723080701.GA3198@stefanha-x1.localdomain/

v7:
- completes io-tests options
- misc fixes

v6:
- add slow path for short-read
- hooks up fsync
- enables qemu-iotests with aio options
- adds bdrv_parse_aio

v5:
- Adds completion polling
- Extends qemu-io
- Adds qemu-iotest

v4:
- Add error handling
- Add trace events
- Remove aio submission based code

Aarushi Mehta (15):
  configure: permit use of io_uring
  qapi/block-core: add option for io_uring
  block/block: add BDRV flag for io_uring
  block/io_uring: implements interfaces for io_uring
  stubs: add stubs for io_uring interface
  util/async: add aio interfaces for io_uring
  blockdev: adds bdrv_parse_aio to use io_uring
  block/file-posix.c: extend to use io_uring
  block: add trace events for io_uring
  block/io_uring: adds userspace completion polling
  qemu-io: adds option to use aio engine
  qemu-img: adds option to use aio engine for benchmarking
  qemu-nbd: adds option for aio engines
  tests/qemu-iotests: enable testing with aio options
  tests/qemu-iotests: use AIOMODE with various tests

 MAINTAINERS                   |   8 +
 block.c                       |  22 ++
 block/Makefile.objs           |   3 +
 block/file-posix.c            |  99 ++++++--
 block/io_uring.c              | 439 ++++++++++++++++++++++++++++++++++
 block/trace-events            |  12 +
 blockdev.c                    |  12 +-
 configure                     |  27 +++
 include/block/aio.h           |  16 +-
 include/block/block.h         |   2 +
 include/block/raw-aio.h       |  12 +
 qapi/block-core.json          |   4 +-
 qemu-img.c                    |  10 +-
 qemu-img.texi                 |   5 +-
 qemu-io.c                     |  24 +-
 qemu-nbd.c                    |  12 +-
 qemu-nbd.texi                 |   4 +-
 stubs/Makefile.objs           |   1 +
 stubs/io_uring.c              |  32 +++
 tests/qemu-iotests/028        |   3 +-
 tests/qemu-iotests/058        |   2 +-
 tests/qemu-iotests/089        |   4 +-
 tests/qemu-iotests/091        |   7 +-
 tests/qemu-iotests/109        |   3 +-
 tests/qemu-iotests/147        |   5 +-
 tests/qemu-iotests/181        |  10 +-
 tests/qemu-iotests/183        |   7 +-
 tests/qemu-iotests/185        |  17 +-
 tests/qemu-iotests/200        |   3 +-
 tests/qemu-iotests/201        |  10 +-
 tests/qemu-iotests/check      |  15 +-
 tests/qemu-iotests/common.rc  |  14 ++
 tests/qemu-iotests/iotests.py |   9 +-
 util/async.c                  |  36 +++
 34 files changed, 812 insertions(+), 77 deletions(-)
 create mode 100644 block/io_uring.c
 create mode 100644 stubs/io_uring.c

-- 
2.21.0

[Qemu-devel] [PATCH v7 01/15] configure: permit use of io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 configure | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/configure b/configure
index 714e7fb6a1..493dbc2ec5 100755
--- a/configure
+++ b/configure
@@ -371,6 +371,7 @@ xen=""
 xen_ctrl_version=""
 xen_pci_passthrough=""
 linux_aio=""
+linux_io_uring=""
 cap_ng=""
 attr=""
 libattr=""
@@ -1272,6 +1273,10 @@ for opt do
   ;;
   --enable-linux-aio) linux_aio="yes"
   ;;
+  --disable-linux-io-uring) linux_io_uring="no"
+  ;;
+  --enable-linux-io-uring) linux_io_uring="yes"
+  ;;
   --disable-attr) attr="no"
   ;;
   --enable-attr) attr="yes"
@@ -1790,6 +1795,7 @@ disabled with --disable-FEATURE, default is enabled if available:
   vde             support for vde network
   netmap          support for netmap network
   linux-aio       Linux AIO support
+  linux-io-uring  Linux io_uring support
   cap-ng          libcap-ng support
   attr            attr and xattr support
   vhost-net       vhost-net kernel acceleration support
@@ -3975,6 +3981,21 @@ EOF
     linux_aio=no
   fi
 fi
+##########################################
+# linux-io-uring probe
+
+if test "$linux_io_uring" != "no" ; then
+  if $pkg_config liburing; then
+    linux_io_uring_cflags=$($pkg_config --cflags liburing)
+    linux_io_uring_libs=$($pkg_config --libs liburing)
+    linux_io_uring=yes
+  else
+    if test "$linux_io_uring" = "yes" ; then
+      feature_not_found "linux io_uring" "Install liburing devel"
+    fi
+    linux_io_uring=no
+  fi
+fi
 
 ##########################################
 # TPM emulation is only on POSIX
@@ -6398,6 +6419,7 @@ echo "PIE               $pie"
 echo "vde support       $vde"
 echo "netmap support    $netmap"
 echo "Linux AIO support $linux_aio"
+echo "Linux io_uring support $linux_io_uring"
 echo "ATTR/XATTR support $attr"
 echo "Install blobs     $blobs"
 echo "KVM support       $kvm"
@@ -6885,6 +6907,11 @@ fi
 if test "$linux_aio" = "yes" ; then
   echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
 fi
+if test "$linux_io_uring" = "yes" ; then
+  echo "CONFIG_LINUX_IO_URING=y" >> $config_host_mak
+  echo "LINUX_IO_URING_CFLAGS=$linux_io_uring_cflags" >> $config_host_mak
+  echo "LINUX_IO_URING_LIBS=$linux_io_uring_libs" >> $config_host_mak
+fi
 if test "$attr" = "yes" ; then
   echo "CONFIG_ATTR=y" >> $config_host_mak
 fi
-- 
2.21.0

[Qemu-devel] [PATCH v7 02/15] qapi/block-core: add option for io_uring

[Aarushi Mehta]

Only enumerates option for devices that support it. Since QAPI schema
supports io_uring, which is the actual name of the Linux API, it is
preferred over io-uring.

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 qapi/block-core.json | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/qapi/block-core.json b/qapi/block-core.json
index 0d43d4f37c..3dc93b483f 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2792,11 +2792,13 @@
 #
 # @threads:     Use qemu's thread pool
 # @native:      Use native AIO backend (only Linux and Windows)
+# @io_uring:    Use linux io_uring (since 4.2)
 #
 # Since: 2.9
 ##
 { 'enum': 'BlockdevAioOptions',
-  'data': [ 'threads', 'native' ] }
+  'data': [ 'threads', 'native',
+            { 'name': 'io_uring', 'if': 'defined(CONFIG_LINUX_IO_URING)' } ] }
 
 ##
 # @BlockdevCacheOptions:
-- 
2.21.0

[Qemu-devel] [PATCH v7 03/15] block/block: add BDRV flag for io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 include/block/block.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/block/block.h b/include/block/block.h
index 50a07c1c33..e29baa172c 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -121,6 +121,7 @@ typedef struct HDGeometry {
                                       ignoring the format layer */
 #define BDRV_O_NO_IO       0x10000 /* don't initialize for I/O */
 #define BDRV_O_AUTO_RDONLY 0x20000 /* degrade to read-only if opening read-write fails */
+#define BDRV_O_IO_URING    0x40000 /* use io_uring instead of the thread pool */
 
 #define BDRV_O_CACHE_MASK  (BDRV_O_NOCACHE | BDRV_O_NO_FLUSH)
 
-- 
2.21.0

[Qemu-devel] [PATCH v7 04/15] block/io_uring: implements interfaces for io_uring

[Aarushi Mehta]

Aborts when sqe fails to be set as sqes cannot be returned to the
ring. Adds slow path for short reads for older kernels

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS             |   7 +
 block/Makefile.objs     |   3 +
 block/io_uring.c        | 408 ++++++++++++++++++++++++++++++++++++++++
 include/block/aio.h     |  16 +-
 include/block/raw-aio.h |  12 ++
 5 files changed, 445 insertions(+), 1 deletion(-)
 create mode 100644 block/io_uring.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d6de200453..be688fcd5e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2530,6 +2530,13 @@ F: block/file-posix.c
 F: block/file-win32.c
 F: block/win32-aio.c
 
+Linux io_uring
+M: Aarushi Mehta <mehta.aaru20@gmail.com>
+R: Stefan Hajnoczi <stefan@redhat.com>
+L: qemu-block@nongnu.org
+S: Maintained
+F: block/io_uring.c
+
 qcow2
 M: Kevin Wolf <kwolf@redhat.com>
 M: Max Reitz <mreitz@redhat.com>
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 35f3bca4d9..6a548af8ed 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -18,6 +18,7 @@ block-obj-y += block-backend.o snapshot.o qapi.o
 block-obj-$(CONFIG_WIN32) += file-win32.o win32-aio.o
 block-obj-$(CONFIG_POSIX) += file-posix.o
 block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
+block-obj-$(CONFIG_LINUX_IO_URING) += io_uring.o
 block-obj-y += null.o mirror.o commit.o io.o create.o
 block-obj-y += throttle-groups.o
 block-obj-$(CONFIG_LINUX) += nvme.o
@@ -61,5 +62,7 @@ block-obj-$(if $(CONFIG_LZFSE),m,n) += dmg-lzfse.o
 dmg-lzfse.o-libs   := $(LZFSE_LIBS)
 qcow.o-libs        := -lz
 linux-aio.o-libs   := -laio
+io_uring.o-cflags  := $(LINUX_IO_URING_CFLAGS)
+io_uring.o-libs    := $(LINUX_IO_URING_LIBS)
 parallels.o-cflags := $(LIBXML2_CFLAGS)
 parallels.o-libs   := $(LIBXML2_LIBS)
diff --git a/block/io_uring.c b/block/io_uring.c
new file mode 100644
index 0000000000..d33e554862
--- /dev/null
+++ b/block/io_uring.c
@@ -0,0 +1,408 @@
+/*
+ * Linux io_uring support.
+ *
+ * Copyright (C) 2009 IBM, Corp.
+ * Copyright (C) 2009 Red Hat, Inc.
+ * Copyright (C) 2019 Aarushi Mehta
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#include "qemu/osdep.h"
+#include <liburing.h>
+#include "qemu-common.h"
+#include "block/aio.h"
+#include "qemu/queue.h"
+#include "block/block.h"
+#include "block/raw-aio.h"
+#include "qemu/coroutine.h"
+#include "qapi/error.h"
+
+#define MAX_EVENTS 128
+
+typedef struct LuringAIOCB {
+    Coroutine *co;
+    struct io_uring_sqe sqeq;
+    ssize_t ret;
+    QEMUIOVector *qiov;
+    bool is_read;
+    QSIMPLEQ_ENTRY(LuringAIOCB) next;
+
+    /*
+     * Buffered reads may require resubmission, see
+     * luring_resubmit_short_read().
+     */
+    int total_read;
+    QEMUIOVector resubmit_qiov;
+} LuringAIOCB;
+
+typedef struct LuringQueue {
+    int plugged;
+    unsigned int in_queue;
+    unsigned int in_flight;
+    bool blocked;
+    QSIMPLEQ_HEAD(, LuringAIOCB) submit_queue;
+} LuringQueue;
+
+typedef struct LuringState {
+    AioContext *aio_context;
+
+    struct io_uring ring;
+
+    /* io queue for submit at batch.  Protected by AioContext lock. */
+    LuringQueue io_q;
+
+    /* I/O completion processing.  Only runs in I/O thread.  */
+    QEMUBH *completion_bh;
+} LuringState;
+
+/**
+ * ioq_submit:
+ * @s: AIO state
+ *
+ * Queues pending sqes and submits them
+ *
+ */
+static int ioq_submit(LuringState *s);
+
+/**
+ * luring_resubmit:
+ *
+ * Resubmit a request by appending it to submit_queue.  The caller must ensure
+ * that ioq_submit() is called later so that submit_queue requests are started.
+ */
+static void luring_resubmit(LuringState *s, LuringAIOCB *luringcb)
+{
+    QSIMPLEQ_INSERT_TAIL(&s->io_q.submit_queue, luringcb, next);
+    s->io_q.in_queue++;
+}
+
+/**
+ * luring_resubmit_short_read:
+ *
+ * Before Linux commit 9d93a3f5a0c ("io_uring: punt short reads to async
+ * context") a buffered I/O request with the start of the file range in the
+ * page cache could result in a short read.  Applications need to resubmit the
+ * remaining read request.
+ *
+ * This is a slow path but recent kernels never take it.
+ */
+static void luring_resubmit_short_read(LuringState *s, LuringAIOCB *luringcb,
+                                       int nread)
+{
+    QEMUIOVector *resubmit_qiov;
+    size_t remaining;
+
+    /* Update read position */
+    luringcb->total_read = nread;
+    remaining = luringcb->qiov->size - luringcb->total_read;
+
+    /* Shorten qiov */
+    resubmit_qiov = &luringcb->resubmit_qiov;
+    if (resubmit_qiov->iov == NULL) {
+        qemu_iovec_init(resubmit_qiov, luringcb->qiov->niov);
+    } else {
+        qemu_iovec_reset(resubmit_qiov);
+    }
+    qemu_iovec_concat(resubmit_qiov, luringcb->qiov, luringcb->total_read,
+                      remaining);
+
+    /* Update sqe */
+    luringcb->sqeq.off = nread;
+    luringcb->sqeq.addr = (__u64)(uintptr_t)luringcb->resubmit_qiov.iov;
+    luringcb->sqeq.len = luringcb->resubmit_qiov.niov;
+
+    luring_resubmit(s, luringcb);
+}
+
+/**
+ * luring_process_completions:
+ * @s: AIO state
+ *
+ * Fetches completed I/O requests, consumes cqes and invokes their callbacks
+ * The function is somewhat tricky because it supports nested event loops, for
+ * example when a request callback invokes aio_poll().  In order to do this,
+ * indices are kept in LuringState.  Function schedules BH completion so it
+ * can be called again in a nested event loop.  When there are no events left
+ * to complete the BH is being canceled.
+ *
+ */
+static void luring_process_completions(LuringState *s)
+{
+    struct io_uring_cqe *cqes;
+    int total_bytes;
+    /*
+     * Request completion callbacks can run the nested event loop.
+     * Schedule ourselves so the nested event loop will "see" remaining
+     * completed requests and process them.  Without this, completion
+     * callbacks that wait for other requests using a nested event loop
+     * would hang forever.
+     *
+     * This workaround is needed because io_uring uses poll_wait, which
+     * is woken up when new events are added to the uring, thus polling on
+     * the same uring fd will block unless more events are received.
+     *
+     * Other leaf block drivers (drivers that access the data themselves)
+     * are networking based, so they poll sockets for data and run the
+     * correct coroutine.
+     */
+    qemu_bh_schedule(s->completion_bh);
+
+    while (io_uring_peek_cqe(&s->ring, &cqes) == 0) {
+        LuringAIOCB *luringcb;
+        int ret;
+
+        if (!cqes) {
+            break;
+        }
+
+        luringcb = io_uring_cqe_get_data(cqes);
+        ret = cqes->res;
+        io_uring_cqe_seen(&s->ring, cqes);
+        cqes = NULL;
+
+        /* Change counters one-by-one because we can be nested. */
+        s->io_q.in_flight--;
+
+        /* total_read is non-zero only for resubmitted read requests */
+        total_bytes = ret + luringcb->total_read;
+
+        if (ret < 0) {
+            if (ret == -EINTR) {
+                luring_resubmit(s, luringcb);
+                continue;
+            }
+        } else if (!luringcb->qiov) {
+            goto end;
+        } else if (total_bytes == luringcb->qiov->size) {
+            ret = 0;
+        /* Only read/write */
+        } else {
+            /* Short Read/Write */
+            if (luringcb->is_read) {
+                if (ret > 0) {
+                    luring_resubmit_short_read(s, luringcb, ret);
+                    continue;
+                } else {
+                    /* Pad with zeroes */
+                    qemu_iovec_memset(luringcb->qiov, total_bytes, 0,
+                                      luringcb->qiov->size - total_bytes);
+                    ret = 0;
+                }
+            } else {
+                ret = -ENOSPC;;
+            }
+        }
+end:
+        luringcb->ret = ret;
+        qemu_iovec_destroy(&luringcb->resubmit_qiov);
+
+        /*
+         * If the coroutine is already entered it must be in ioq_submit()
+         * and will notice luringcb->ret has been filled in when it
+         * eventually runs later. Coroutines cannot be entered recursively
+         * so avoid doing that!
+         */
+        if (!qemu_coroutine_entered(luringcb->co)) {
+            aio_co_wake(luringcb->co);
+        }
+    }
+    qemu_bh_cancel(s->completion_bh);
+}
+
+static void luring_process_completions_and_submit(LuringState *s)
+{
+    aio_context_acquire(s->aio_context);
+    luring_process_completions(s);
+
+    if (!s->io_q.plugged && s->io_q.in_queue > 0) {
+        ioq_submit(s);
+    }
+    aio_context_release(s->aio_context);
+}
+
+static void qemu_luring_completion_bh(void *opaque)
+{
+    LuringState *s = opaque;
+    luring_process_completions_and_submit(s);
+}
+
+static void qemu_luring_completion_cb(void *opaque)
+{
+    LuringState *s = opaque;
+    luring_process_completions_and_submit(s);
+}
+
+static void ioq_init(LuringQueue *io_q)
+{
+    QSIMPLEQ_INIT(&io_q->submit_queue);
+    io_q->plugged = 0;
+    io_q->in_queue = 0;
+    io_q->in_flight = 0;
+    io_q->blocked = false;
+}
+
+static int ioq_submit(LuringState *s)
+{
+    int ret = 0;
+    LuringAIOCB *luringcb, *luringcb_next;
+
+    while (s->io_q.in_queue > 0) {
+        /*
+         * Try to fetch sqes from the ring for requests waiting in
+         * the overflow queue
+         */
+        QSIMPLEQ_FOREACH_SAFE(luringcb, &s->io_q.submit_queue, next,
+                              luringcb_next) {
+            struct io_uring_sqe *sqes = io_uring_get_sqe(&s->ring);
+            if (!sqes) {
+                break;
+            }
+            /* Prep sqe for submission */
+            *sqes = luringcb->sqeq;
+            QSIMPLEQ_REMOVE_HEAD(&s->io_q.submit_queue, next);
+        }
+        ret = io_uring_submit(&s->ring);
+        /* Prevent infinite loop if submission is refused */
+        if (ret <= 0) {
+            if (ret == -EAGAIN) {
+                continue;
+            }
+            break;
+        }
+        s->io_q.in_flight += ret;
+        s->io_q.in_queue  -= ret;
+    }
+    s->io_q.blocked = (s->io_q.in_queue > 0);
+
+    if (s->io_q.in_flight) {
+        /*
+         * We can try to complete something just right away if there are
+         * still requests in-flight.
+         */
+        luring_process_completions(s);
+    }
+    return ret;
+}
+
+void luring_io_plug(BlockDriverState *bs, LuringState *s)
+{
+    s->io_q.plugged++;
+}
+
+void luring_io_unplug(BlockDriverState *bs, LuringState *s)
+{
+    assert(s->io_q.plugged);
+    if (--s->io_q.plugged == 0 &&
+        !s->io_q.blocked && s->io_q.in_queue > 0) {
+        ioq_submit(s);
+    }
+}
+
+/**
+ * luring_do_submit:
+ * @fd: file descriptor for I/O
+ * @luringcb: AIO control block
+ * @s: AIO state
+ * @offset: offset for request
+ * @type: type of request
+ *
+ * Fetches sqes from ring, adds to pending queue and preps them
+ *
+ */
+static int luring_do_submit(int fd, LuringAIOCB *luringcb, LuringState *s,
+                            uint64_t offset, int type)
+{
+    struct io_uring_sqe *sqes = &luringcb->sqeq;
+
+    switch (type) {
+    case QEMU_AIO_WRITE:
+        io_uring_prep_writev(sqes, fd, luringcb->qiov->iov,
+                             luringcb->qiov->niov, offset);
+        break;
+    case QEMU_AIO_READ:
+        io_uring_prep_readv(sqes, fd, luringcb->qiov->iov,
+                            luringcb->qiov->niov, offset);
+        break;
+    case QEMU_AIO_FLUSH:
+        io_uring_prep_fsync(sqes, fd, IORING_FSYNC_DATASYNC);
+        break;
+    default:
+        fprintf(stderr, "%s: invalid AIO request type, aborting 0x%x.\n",
+                        __func__, type);
+        abort();
+    }
+    io_uring_sqe_set_data(sqes, luringcb);
+
+    QSIMPLEQ_INSERT_TAIL(&s->io_q.submit_queue, luringcb, next);
+    s->io_q.in_queue++;
+
+    if (!s->io_q.blocked &&
+        (!s->io_q.plugged ||
+         s->io_q.in_flight + s->io_q.in_queue >= MAX_EVENTS)) {
+        return ioq_submit(s);
+    }
+    return 0;
+}
+
+int coroutine_fn luring_co_submit(BlockDriverState *bs, LuringState *s, int fd,
+                                uint64_t offset, QEMUIOVector *qiov, int type)
+{
+    int ret;
+    LuringAIOCB luringcb = {
+        .co         = qemu_coroutine_self(),
+        .ret        = -EINPROGRESS,
+        .qiov       = qiov,
+        .is_read    = (type == QEMU_AIO_READ),
+    };
+
+    ret = luring_do_submit(fd, &luringcb, s, offset, type);
+    if (ret < 0) {
+        return ret;
+    }
+
+    if (luringcb.ret == -EINPROGRESS) {
+        qemu_coroutine_yield();
+    }
+    return luringcb.ret;
+}
+
+void luring_detach_aio_context(LuringState *s, AioContext *old_context)
+{
+    aio_set_fd_handler(old_context, s->ring.ring_fd, false, NULL, NULL, NULL,
+                       s);
+    qemu_bh_delete(s->completion_bh);
+    s->aio_context = NULL;
+}
+
+void luring_attach_aio_context(LuringState *s, AioContext *new_context)
+{
+    s->aio_context = new_context;
+    s->completion_bh = aio_bh_new(new_context, qemu_luring_completion_bh, s);
+    aio_set_fd_handler(s->aio_context, s->ring.ring_fd, false,
+                       qemu_luring_completion_cb, NULL, NULL, s);
+}
+
+LuringState *luring_init(Error **errp)
+{
+    int rc;
+    LuringState *s;
+    s = g_new0(LuringState, 1);
+    struct io_uring *ring = &s->ring;
+    rc = io_uring_queue_init(MAX_EVENTS, ring, 0);
+    if (rc < 0) {
+        error_setg_errno(errp, errno, "failed to init linux io_uring ring");
+        g_free(s);
+        return NULL;
+    }
+
+    ioq_init(&s->io_q);
+    return s;
+
+}
+
+void luring_cleanup(LuringState *s)
+{
+    io_uring_queue_exit(&s->ring);
+    g_free(s);
+}
diff --git a/include/block/aio.h b/include/block/aio.h
index 6b0d52f732..7ba9bd7874 100644
--- a/include/block/aio.h
+++ b/include/block/aio.h
@@ -49,6 +49,7 @@ typedef void IOHandler(void *opaque);
 struct Coroutine;
 struct ThreadPool;
 struct LinuxAioState;
+struct LuringState;
 
 struct AioContext {
     GSource source;
@@ -117,11 +118,19 @@ struct AioContext {
     struct ThreadPool *thread_pool;
 
 #ifdef CONFIG_LINUX_AIO
-    /* State for native Linux AIO.  Uses aio_context_acquire/release for
+    /*
+     * State for native Linux AIO.  Uses aio_context_acquire/release for
      * locking.
      */
     struct LinuxAioState *linux_aio;
 #endif
+#ifdef CONFIG_LINUX_IO_URING
+    /*
+     * State for Linux io_uring.  Uses aio_context_acquire/release for
+     * locking.
+     */
+    struct LuringState *linux_io_uring;
+#endif
 
     /* TimerLists for calling timers - one per clock type.  Has its own
      * locking.
@@ -386,6 +395,11 @@ struct LinuxAioState *aio_setup_linux_aio(AioContext *ctx, Error **errp);
 /* Return the LinuxAioState bound to this AioContext */
 struct LinuxAioState *aio_get_linux_aio(AioContext *ctx);
 
+/* Setup the LuringState bound to this AioContext */
+struct LuringState *aio_setup_linux_io_uring(AioContext *ctx, Error **errp);
+
+/* Return the LuringState bound to this AioContext */
+struct LuringState *aio_get_linux_io_uring(AioContext *ctx);
 /**
  * aio_timer_new_with_attrs:
  * @ctx: the aio context
diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
index 0cb7cc74a2..71d7d1395f 100644
--- a/include/block/raw-aio.h
+++ b/include/block/raw-aio.h
@@ -55,6 +55,18 @@ void laio_attach_aio_context(LinuxAioState *s, AioContext *new_context);
 void laio_io_plug(BlockDriverState *bs, LinuxAioState *s);
 void laio_io_unplug(BlockDriverState *bs, LinuxAioState *s);
 #endif
+/* io_uring.c - Linux io_uring implementation */
+#ifdef CONFIG_LINUX_IO_URING
+typedef struct LuringState LuringState;
+LuringState *luring_init(Error **errp);
+void luring_cleanup(LuringState *s);
+int coroutine_fn luring_co_submit(BlockDriverState *bs, LuringState *s, int fd,
+                                uint64_t offset, QEMUIOVector *qiov, int type);
+void luring_detach_aio_context(LuringState *s, AioContext *old_context);
+void luring_attach_aio_context(LuringState *s, AioContext *new_context);
+void luring_io_plug(BlockDriverState *bs, LuringState *s);
+void luring_io_unplug(BlockDriverState *bs, LuringState *s);
+#endif
 
 #ifdef _WIN32
 typedef struct QEMUWin32AIOState QEMUWin32AIOState;
-- 
2.21.0

Re: [Qemu-devel] [PATCH v7 04/15] block/io_uring: implements interfaces for io_uring

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 575 bytes --]

On Mon, Jul 29, 2019 at 08:46:40PM +0530, Aarushi Mehta wrote:
> +/**
> + * luring_process_completions:
> + * @s: AIO state
> + *
> + * Fetches completed I/O requests, consumes cqes and invokes their callbacks
> + * The function is somewhat tricky because it supports nested event loops, for
> + * example when a request callback invokes aio_poll().  In order to do this,
> + * indices are kept in LuringState.  Function schedules BH completion so it

The sentence about indices is outdated and can be removed.

Otherwise:

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] [PATCH v7 05/15] stubs: add stubs for io_uring interface

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 MAINTAINERS         |  1 +
 stubs/Makefile.objs |  1 +
 stubs/io_uring.c    | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 34 insertions(+)
 create mode 100644 stubs/io_uring.c

diff --git a/MAINTAINERS b/MAINTAINERS
index be688fcd5e..bca5de7d6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2536,6 +2536,7 @@ R: Stefan Hajnoczi <stefan@redhat.com>
 L: qemu-block@nongnu.org
 S: Maintained
 F: block/io_uring.c
+F: stubs/io_uring.c
 
 qcow2
 M: Kevin Wolf <kwolf@redhat.com>
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index 9c7393b08c..5cf160a9c8 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -13,6 +13,7 @@ stub-obj-y += iothread.o
 stub-obj-y += iothread-lock.o
 stub-obj-y += is-daemonized.o
 stub-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
+stub-obj-$(CONFIG_LINUX_IO_URING) += io_uring.o
 stub-obj-y += machine-init-done.o
 stub-obj-y += migr-blocker.o
 stub-obj-y += change-state-handler.o
diff --git a/stubs/io_uring.c b/stubs/io_uring.c
new file mode 100644
index 0000000000..622d1e4648
--- /dev/null
+++ b/stubs/io_uring.c
@@ -0,0 +1,32 @@
+/*
+ * Linux io_uring support.
+ *
+ * Copyright (C) 2009 IBM, Corp.
+ * Copyright (C) 2009 Red Hat, Inc.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#include "qemu/osdep.h"
+#include "block/aio.h"
+#include "block/raw-aio.h"
+
+void luring_detach_aio_context(LuringState *s, AioContext *old_context)
+{
+    abort();
+}
+
+void luring_attach_aio_context(LuringState *s, AioContext *new_context)
+{
+    abort();
+}
+
+LuringState *luring_init(Error **errp)
+{
+    abort();
+}
+
+void luring_cleanup(LuringState *s)
+{
+    abort();
+}
-- 
2.21.0

[Qemu-devel] [PATCH v7 06/15] util/async: add aio interfaces for io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 util/async.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/util/async.c b/util/async.c
index 8d2105729c..2e0a5e20ac 100644
--- a/util/async.c
+++ b/util/async.c
@@ -276,6 +276,14 @@ aio_ctx_finalize(GSource     *source)
     }
 #endif
 
+#ifdef CONFIG_LINUX_IO_URING
+    if (ctx->linux_io_uring) {
+        luring_detach_aio_context(ctx->linux_io_uring, ctx);
+        luring_cleanup(ctx->linux_io_uring);
+        ctx->linux_io_uring = NULL;
+    }
+#endif
+
     assert(QSLIST_EMPTY(&ctx->scheduled_coroutines));
     qemu_bh_delete(ctx->co_schedule_bh);
 
@@ -340,6 +348,29 @@ LinuxAioState *aio_get_linux_aio(AioContext *ctx)
 }
 #endif
 
+#ifdef CONFIG_LINUX_IO_URING
+LuringState *aio_setup_linux_io_uring(AioContext *ctx, Error **errp)
+{
+    if (ctx->linux_io_uring) {
+        return ctx->linux_io_uring;
+    }
+
+    ctx->linux_io_uring = luring_init(errp);
+    if (!ctx->linux_io_uring) {
+        return NULL;
+    }
+
+    luring_attach_aio_context(ctx->linux_io_uring, ctx);
+    return ctx->linux_io_uring;
+}
+
+LuringState *aio_get_linux_io_uring(AioContext *ctx)
+{
+    assert(ctx->linux_io_uring);
+    return ctx->linux_io_uring;
+}
+#endif
+
 void aio_notify(AioContext *ctx)
 {
     /* Write e.g. bh->scheduled before reading ctx->notify_me.  Pairs
@@ -431,6 +462,11 @@ AioContext *aio_context_new(Error **errp)
 #ifdef CONFIG_LINUX_AIO
     ctx->linux_aio = NULL;
 #endif
+
+#ifdef CONFIG_LINUX_IO_URING
+    ctx->linux_io_uring = NULL;
+#endif
+
     ctx->thread_pool = NULL;
     qemu_rec_mutex_init(&ctx->lock);
     timerlistgroup_init(&ctx->tlg, aio_timerlist_notify, ctx);
-- 
2.21.0

[Qemu-devel] [PATCH v7 07/15] blockdev: adds bdrv_parse_aio to use io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block.c               | 22 ++++++++++++++++++++++
 blockdev.c            | 12 ++++--------
 include/block/block.h |  1 +
 3 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/block.c b/block.c
index cbd8da5f3b..401831e28d 100644
--- a/block.c
+++ b/block.c
@@ -844,6 +844,28 @@ static BlockdevDetectZeroesOptions bdrv_parse_detect_zeroes(QemuOpts *opts,
     return detect_zeroes;
 }
 
+/**
+ * Set open flags for aio engine
+ *
+ * Return 0 on success, -1 if the engine specified is invalid
+ */
+int bdrv_parse_aio(const char *mode, int *flags)
+{
+    if (!strcmp(mode, "threads")) {
+        /* do nothing, default */
+    } else if (!strcmp(mode, "native")) {
+        *flags |= BDRV_O_NATIVE_AIO;
+#ifdef CONFIG_LINUX_IO_URING
+    } else if (!strcmp(mode, "io_uring")) {
+        *flags |= BDRV_O_IO_URING;
+#endif
+    } else {
+        return -1;
+    }
+
+    return 0;
+}
+
 /**
  * Set open flags for a given discard mode
  *
diff --git a/blockdev.c b/blockdev.c
index 4d141e9a1f..a41623ae9a 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -383,13 +383,9 @@ static void extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
         }
 
         if ((aio = qemu_opt_get(opts, "aio")) != NULL) {
-            if (!strcmp(aio, "native")) {
-                *bdrv_flags |= BDRV_O_NATIVE_AIO;
-            } else if (!strcmp(aio, "threads")) {
-                /* this is the default */
-            } else {
-               error_setg(errp, "invalid aio option");
-               return;
+            if (bdrv_parse_aio(aio, bdrv_flags) < 0) {
+                error_setg(errp, "invalid aio option");
+                return;
             }
         }
     }
@@ -4574,7 +4570,7 @@ QemuOptsList qemu_common_drive_opts = {
         },{
             .name = "aio",
             .type = QEMU_OPT_STRING,
-            .help = "host AIO implementation (threads, native)",
+            .help = "host AIO implementation (threads, native, io_uring)",
         },{
             .name = BDRV_OPT_CACHE_WB,
             .type = QEMU_OPT_BOOL,
diff --git a/include/block/block.h b/include/block/block.h
index e29baa172c..ec6b9ea4c8 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -297,6 +297,7 @@ void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top,
 void bdrv_replace_node(BlockDriverState *from, BlockDriverState *to,
                        Error **errp);
 
+int bdrv_parse_aio(const char *mode, int *flags);
 int bdrv_parse_cache_mode(const char *mode, int *flags, bool *writethrough);
 int bdrv_parse_discard_flags(const char *mode, int *flags);
 BdrvChild *bdrv_open_child(const char *filename,
-- 
2.21.0

[Qemu-devel] [PATCH v7 08/15] block/file-posix.c: extend to use io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Maxim Levitsky <maximlevitsky@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/file-posix.c | 99 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 79 insertions(+), 20 deletions(-)

diff --git a/block/file-posix.c b/block/file-posix.c
index 4479cc7ab4..4aa42f826f 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -156,6 +156,7 @@ typedef struct BDRVRawState {
     bool has_write_zeroes:1;
     bool discard_zeroes:1;
     bool use_linux_aio:1;
+    bool use_linux_io_uring:1;
     bool page_cache_inconsistent:1;
     bool has_fallocate;
     bool needs_alignment;
@@ -425,7 +426,7 @@ static QemuOptsList raw_runtime_opts = {
         {
             .name = "aio",
             .type = QEMU_OPT_STRING,
-            .help = "host AIO implementation (threads, native)",
+            .help = "host AIO implementation (threads, native, io_uring)",
         },
         {
             .name = "locking",
@@ -484,9 +485,15 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
         goto fail;
     }
 
-    aio_default = (bdrv_flags & BDRV_O_NATIVE_AIO)
-                  ? BLOCKDEV_AIO_OPTIONS_NATIVE
-                  : BLOCKDEV_AIO_OPTIONS_THREADS;
+    if (bdrv_flags & BDRV_O_NATIVE_AIO) {
+        aio_default = BLOCKDEV_AIO_OPTIONS_NATIVE;
+#ifdef CONFIG_LINUX_IO_URING
+    } else if (bdrv_flags & BDRV_O_IO_URING) {
+        aio_default = BLOCKDEV_AIO_OPTIONS_IO_URING;
+#endif
+    } else {
+        aio_default = BLOCKDEV_AIO_OPTIONS_THREADS;
+    }
     aio = qapi_enum_parse(&BlockdevAioOptions_lookup,
                           qemu_opt_get(opts, "aio"),
                           aio_default, &local_err);
@@ -495,7 +502,11 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
         ret = -EINVAL;
         goto fail;
     }
+
     s->use_linux_aio = (aio == BLOCKDEV_AIO_OPTIONS_NATIVE);
+#ifdef CONFIG_LINUX_IO_URING
+    s->use_linux_io_uring = (aio == BLOCKDEV_AIO_OPTIONS_IO_URING);
+#endif
 
     locking = qapi_enum_parse(&OnOffAuto_lookup,
                               qemu_opt_get(opts, "locking"),
@@ -559,7 +570,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
     s->shared_perm = BLK_PERM_ALL;
 
 #ifdef CONFIG_LINUX_AIO
-     /* Currently Linux does AIO only for files opened with O_DIRECT */
+    /* Currently Linux does AIO only for files opened with O_DIRECT */
     if (s->use_linux_aio) {
         if (!(s->open_flags & O_DIRECT)) {
             error_setg(errp, "aio=native was specified, but it requires "
@@ -581,6 +592,22 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
     }
 #endif /* !defined(CONFIG_LINUX_AIO) */
 
+#ifdef CONFIG_LINUX_IO_URING
+    if (s->use_linux_io_uring) {
+        if (!aio_setup_linux_io_uring(bdrv_get_aio_context(bs), errp)) {
+            error_prepend(errp, "Unable to use io_uring: ");
+            goto fail;
+        }
+    }
+#else
+    if (s->use_linux_io_uring) {
+        error_setg(errp, "aio=io_uring was specified, but is not supported "
+                         "in this build.");
+        ret = -EINVAL;
+        goto fail;
+    }
+#endif /* !defined(CONFIG_LINUX_IO_URING) */
+
     s->has_discard = true;
     s->has_write_zeroes = true;
     if ((bs->open_flags & BDRV_O_NOCACHE) != 0) {
@@ -1874,21 +1901,25 @@ static int coroutine_fn raw_co_prw(BlockDriverState *bs, uint64_t offset,
         return -EIO;
 
     /*
-     * Check if the underlying device requires requests to be aligned,
-     * and if the request we are trying to submit is aligned or not.
-     * If this is the case tell the low-level driver that it needs
-     * to copy the buffer.
+     * When using O_DIRECT, the request must be aligned to be able to use
+     * either libaio or io_uring interface. If not fail back to regular thread
+     * pool read/write code which emulates this for us if we
+     * set QEMU_AIO_MISALIGNED.
      */
-    if (s->needs_alignment) {
-        if (!bdrv_qiov_is_aligned(bs, qiov)) {
-            type |= QEMU_AIO_MISALIGNED;
+    if (s->needs_alignment && !bdrv_qiov_is_aligned(bs, qiov)) {
+        type |= QEMU_AIO_MISALIGNED;
+#ifdef CONFIG_LINUX_IO_URING
+    } else if (s->use_linux_io_uring) {
+        LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs));
+        assert(qiov->size == bytes);
+        return luring_co_submit(bs, aio, s->fd, offset, qiov, type);
+#endif
 #ifdef CONFIG_LINUX_AIO
-        } else if (s->use_linux_aio) {
-            LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs));
-            assert(qiov->size == bytes);
-            return laio_co_submit(bs, aio, s->fd, offset, qiov, type);
+    } else if (s->use_linux_aio) {
+        LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs));
+        assert(qiov->size == bytes);
+        return laio_co_submit(bs, aio, s->fd, offset, qiov, type);
 #endif
-        }
     }
 
     acb = (RawPosixAIOData) {
@@ -1924,24 +1955,36 @@ static int coroutine_fn raw_co_pwritev(BlockDriverState *bs, uint64_t offset,
 
 static void raw_aio_plug(BlockDriverState *bs)
 {
+    BDRVRawState __attribute__((unused)) *s = bs->opaque;
 #ifdef CONFIG_LINUX_AIO
-    BDRVRawState *s = bs->opaque;
     if (s->use_linux_aio) {
         LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs));
         laio_io_plug(bs, aio);
     }
 #endif
+#ifdef CONFIG_LINUX_IO_URING
+    if (s->use_linux_io_uring) {
+        LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs));
+        luring_io_plug(bs, aio);
+    }
+#endif
 }
 
 static void raw_aio_unplug(BlockDriverState *bs)
 {
+    BDRVRawState __attribute__((unused)) *s = bs->opaque;
 #ifdef CONFIG_LINUX_AIO
-    BDRVRawState *s = bs->opaque;
     if (s->use_linux_aio) {
         LinuxAioState *aio = aio_get_linux_aio(bdrv_get_aio_context(bs));
         laio_io_unplug(bs, aio);
     }
 #endif
+#ifdef CONFIG_LINUX_IO_URING
+    if (s->use_linux_io_uring) {
+        LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs));
+        luring_io_unplug(bs, aio);
+    }
+#endif
 }
 
 static int raw_co_flush_to_disk(BlockDriverState *bs)
@@ -1961,14 +2004,20 @@ static int raw_co_flush_to_disk(BlockDriverState *bs)
         .aio_type       = QEMU_AIO_FLUSH,
     };
 
+#ifdef CONFIG_LINUX_IO_URING
+    if (s->use_linux_io_uring) {
+        LuringState *aio = aio_get_linux_io_uring(bdrv_get_aio_context(bs));
+        return luring_co_submit(bs, aio, s->fd, 0, NULL, QEMU_AIO_FLUSH);
+    }
+#endif
     return raw_thread_pool_submit(bs, handle_aiocb_flush, &acb);
 }
 
 static void raw_aio_attach_aio_context(BlockDriverState *bs,
                                        AioContext *new_context)
 {
+    BDRVRawState __attribute__((unused)) *s = bs->opaque;
 #ifdef CONFIG_LINUX_AIO
-    BDRVRawState *s = bs->opaque;
     if (s->use_linux_aio) {
         Error *local_err;
         if (!aio_setup_linux_aio(new_context, &local_err)) {
@@ -1978,6 +2027,16 @@ static void raw_aio_attach_aio_context(BlockDriverState *bs,
         }
     }
 #endif
+#ifdef CONFIG_LINUX_IO_URING
+    if (s->use_linux_io_uring) {
+        Error *local_err;
+        if (!aio_setup_linux_io_uring(new_context, &local_err)) {
+            error_reportf_err(local_err, "Unable to use linux io_uring, "
+                                         "falling back to thread pool: ");
+            s->use_linux_io_uring = false;
+        }
+    }
+#endif
 }
 
 static void raw_close(BlockDriverState *bs)
-- 
2.21.0

[Qemu-devel] [PATCH v7 09/15] block: add trace events for io_uring

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/io_uring.c   | 22 +++++++++++++++++++---
 block/trace-events | 12 ++++++++++++
 2 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/block/io_uring.c b/block/io_uring.c
index d33e554862..c7b2b0a9e2 100644
--- a/block/io_uring.c
+++ b/block/io_uring.c
@@ -17,6 +17,7 @@
 #include "block/raw-aio.h"
 #include "qemu/coroutine.h"
 #include "qapi/error.h"
+#include "trace.h"
 
 #define MAX_EVENTS 128
 
@@ -93,6 +94,8 @@ static void luring_resubmit_short_read(LuringState *s, LuringAIOCB *luringcb,
     QEMUIOVector *resubmit_qiov;
     size_t remaining;
 
+    trace_luring_resubmit_short_read(s, luringcb, nread);
+
     /* Update read position */
     luringcb->total_read = nread;
     remaining = luringcb->qiov->size - luringcb->total_read;
@@ -163,6 +166,7 @@ static void luring_process_completions(LuringState *s)
 
         /* Change counters one-by-one because we can be nested. */
         s->io_q.in_flight--;
+        trace_luring_process_completion(s, luringcb, ret);
 
         /* total_read is non-zero only for resubmitted read requests */
         total_bytes = ret + luringcb->total_read;
@@ -263,6 +267,7 @@ static int ioq_submit(LuringState *s)
             QSIMPLEQ_REMOVE_HEAD(&s->io_q.submit_queue, next);
         }
         ret = io_uring_submit(&s->ring);
+        trace_luring_io_uring_submit(s, ret);
         /* Prevent infinite loop if submission is refused */
         if (ret <= 0) {
             if (ret == -EAGAIN) {
@@ -287,12 +292,15 @@ static int ioq_submit(LuringState *s)
 
 void luring_io_plug(BlockDriverState *bs, LuringState *s)
 {
+    trace_luring_io_plug(s);
     s->io_q.plugged++;
 }
 
 void luring_io_unplug(BlockDriverState *bs, LuringState *s)
 {
     assert(s->io_q.plugged);
+    trace_luring_io_unplug(s, s->io_q.blocked, s->io_q.plugged,
+                           s->io_q.in_queue, s->io_q.in_flight);
     if (--s->io_q.plugged == 0 &&
         !s->io_q.blocked && s->io_q.in_queue > 0) {
         ioq_submit(s);
@@ -313,6 +321,7 @@ void luring_io_unplug(BlockDriverState *bs, LuringState *s)
 static int luring_do_submit(int fd, LuringAIOCB *luringcb, LuringState *s,
                             uint64_t offset, int type)
 {
+    int ret;
     struct io_uring_sqe *sqes = &luringcb->sqeq;
 
     switch (type) {
@@ -336,11 +345,14 @@ static int luring_do_submit(int fd, LuringAIOCB *luringcb, LuringState *s,
 
     QSIMPLEQ_INSERT_TAIL(&s->io_q.submit_queue, luringcb, next);
     s->io_q.in_queue++;
-
+    trace_luring_do_submit(s, s->io_q.blocked, s->io_q.plugged,
+                           s->io_q.in_queue, s->io_q.in_flight);
     if (!s->io_q.blocked &&
         (!s->io_q.plugged ||
          s->io_q.in_flight + s->io_q.in_queue >= MAX_EVENTS)) {
-        return ioq_submit(s);
+        ret = ioq_submit(s);
+        trace_luring_do_submit_done(s, ret);
+        return ret;
     }
     return 0;
 }
@@ -355,8 +367,10 @@ int coroutine_fn luring_co_submit(BlockDriverState *bs, LuringState *s, int fd,
         .qiov       = qiov,
         .is_read    = (type == QEMU_AIO_READ),
     };
-
+    trace_luring_co_submit(bs, s, &luringcb, fd, offset, qiov ? qiov->size : 0,
+                           type);
     ret = luring_do_submit(fd, &luringcb, s, offset, type);
+
     if (ret < 0) {
         return ret;
     }
@@ -388,6 +402,7 @@ LuringState *luring_init(Error **errp)
     int rc;
     LuringState *s;
     s = g_new0(LuringState, 1);
+    trace_luring_init_state(s, sizeof(*s));
     struct io_uring *ring = &s->ring;
     rc = io_uring_queue_init(MAX_EVENTS, ring, 0);
     if (rc < 0) {
@@ -405,4 +420,5 @@ void luring_cleanup(LuringState *s)
 {
     io_uring_queue_exit(&s->ring);
     g_free(s);
+    trace_luring_cleanup_state(s);
 }
diff --git a/block/trace-events b/block/trace-events
index d724df0117..66aaf8352b 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -60,6 +60,18 @@ qmp_block_stream(void *bs) "bs %p"
 file_paio_submit(void *acb, void *opaque, int64_t offset, int count, int type) "acb %p opaque %p offset %"PRId64" count %d type %d"
 file_copy_file_range(void *bs, int src, int64_t src_off, int dst, int64_t dst_off, int64_t bytes, int flags, int64_t ret) "bs %p src_fd %d offset %"PRIu64" dst_fd %d offset %"PRIu64" bytes %"PRIu64" flags %d ret %"PRId64
 
+#io_uring.c
+luring_init_state(void *s, size_t size) "s %p size %zu"
+luring_cleanup_state(void *s) "%p freed"
+luring_io_plug(void *s) "LuringState %p plug"
+luring_io_unplug(void *s, int blocked, int plugged, int queued, int inflight) "LuringState %p blocked %d plugged %d queued %d inflight %d"
+luring_do_submit(void *s, int blocked, int plugged, int queued, int inflight) "LuringState %p blocked %d plugged %d queued %d inflight %d"
+luring_do_submit_done(void *s, int ret) "LuringState %p submitted to kernel %d"
+luring_co_submit(void *bs, void *s, void *luringcb, int fd, uint64_t offset, size_t nbytes, int type) "bs %p s %p luringcb %p fd %d offset %" PRId64 " nbytes %zd type %d"
+luring_process_completion(void *s, void *aiocb, int ret) "LuringState %p luringcb %p ret %d"
+luring_io_uring_submit(void *s, int ret) "LuringState %p ret %d"
+luring_resubmit_short_read(void *s, void *luringcb, int nread) "LuringState %p luringcb %p nread %d"
+
 # qcow2.c
 qcow2_writev_start_req(void *co, int64_t offset, int bytes) "co %p offset 0x%" PRIx64 " bytes %d"
 qcow2_writev_done_req(void *co, int ret) "co %p ret %d"
-- 
2.21.0

[Qemu-devel] [PATCH v7 10/15] block/io_uring: adds userspace completion polling

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/io_uring.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/block/io_uring.c b/block/io_uring.c
index c7b2b0a9e2..691130b948 100644
--- a/block/io_uring.c
+++ b/block/io_uring.c
@@ -237,6 +237,21 @@ static void qemu_luring_completion_cb(void *opaque)
     luring_process_completions_and_submit(s);
 }
 
+static bool qemu_luring_poll_cb(void *opaque)
+{
+    LuringState *s = opaque;
+    struct io_uring_cqe *cqes;
+
+    if (io_uring_peek_cqe(&s->ring, &cqes) == 0) {
+        if (cqes) {
+            luring_process_completions_and_submit(s);
+            return true;
+        }
+    }
+
+    return false;
+}
+
 static void ioq_init(LuringQueue *io_q)
 {
     QSIMPLEQ_INIT(&io_q->submit_queue);
@@ -394,7 +409,7 @@ void luring_attach_aio_context(LuringState *s, AioContext *new_context)
     s->aio_context = new_context;
     s->completion_bh = aio_bh_new(new_context, qemu_luring_completion_bh, s);
     aio_set_fd_handler(s->aio_context, s->ring.ring_fd, false,
-                       qemu_luring_completion_cb, NULL, NULL, s);
+                       qemu_luring_completion_cb, NULL, qemu_luring_poll_cb, s);
 }
 
 LuringState *luring_init(Error **errp)
-- 
2.21.0

[Qemu-devel] [PATCH v7 11/15] qemu-io: adds option to use aio engine

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
---
 qemu-io.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/qemu-io.c b/qemu-io.c
index f64eca6940..6568f0c369 100644
--- a/qemu-io.c
+++ b/qemu-io.c
@@ -130,7 +130,8 @@ static void open_help(void)
 " -C, -- use copy-on-read\n"
 " -n, -- disable host cache, short for -t none\n"
 " -U, -- force shared permissions\n"
-" -k, -- use kernel AIO implementation (on Linux only)\n"
+" -k, -- use kernel AIO implementation (Linux only, prefer use of -i)\n"
+" -i, -- use AIO mode (threads, native or io_uring)"
 " -t, -- use the given cache mode for the image\n"
 " -d, -- use the given discard mode for the image\n"
 " -o, -- options to be given to the block driver"
@@ -172,7 +173,7 @@ static int open_f(BlockBackend *blk, int argc, char **argv)
     QDict *opts;
     bool force_share = false;
 
-    while ((c = getopt(argc, argv, "snCro:kt:d:U")) != -1) {
+    while ((c = getopt(argc, argv, "snCro:kit:d:U")) != -1) {
         switch (c) {
         case 's':
             flags |= BDRV_O_SNAPSHOT;
@@ -204,6 +205,13 @@ static int open_f(BlockBackend *blk, int argc, char **argv)
                 return -EINVAL;
             }
             break;
+        case 'i':
+            if (bdrv_parse_aio(optarg, &flags) < 0) {
+                error_report("Invalid aio option: %s", optarg);
+                qemu_opts_reset(&empty_opts);
+                return -EINVAL;
+            }
+            break;
         case 'o':
             if (imageOpts) {
                 printf("--image-opts and 'open -o' are mutually exclusive\n");
@@ -291,7 +299,9 @@ static void usage(const char *name)
 "  -n, --nocache        disable host cache, short for -t none\n"
 "  -C, --copy-on-read   enable copy-on-read\n"
 "  -m, --misalign       misalign allocations for O_DIRECT\n"
-"  -k, --native-aio     use kernel AIO implementation (on Linux only)\n"
+"  -k, --native-aio     use kernel AIO implementation\n"
+"                       (Linux only, prefer use of -i)\n"
+"  -i, --aio=MODE       use AIO mode (threads, native or io_uring)\n"
 "  -t, --cache=MODE     use the given cache mode for the image\n"
 "  -d, --discard=MODE   use the given discard mode for the image\n"
 "  -T, --trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
@@ -489,7 +499,7 @@ static QemuOptsList file_opts = {
 int main(int argc, char **argv)
 {
     int readonly = 0;
-    const char *sopt = "hVc:d:f:rsnCmkt:T:U";
+    const char *sopt = "hVc:d:f:rsnCmki:t:T:U";
     const struct option lopt[] = {
         { "help", no_argument, NULL, 'h' },
         { "version", no_argument, NULL, 'V' },
@@ -501,6 +511,7 @@ int main(int argc, char **argv)
         { "copy-on-read", no_argument, NULL, 'C' },
         { "misalign", no_argument, NULL, 'm' },
         { "native-aio", no_argument, NULL, 'k' },
+        { "aio", required_argument, NULL, 'i' },
         { "discard", required_argument, NULL, 'd' },
         { "cache", required_argument, NULL, 't' },
         { "trace", required_argument, NULL, 'T' },
@@ -567,6 +578,11 @@ int main(int argc, char **argv)
             break;
         case 'k':
             flags |= BDRV_O_NATIVE_AIO;
+        case 'i':
+            if (bdrv_parse_aio(optarg, &flags) < 0) {
+                error_report("Invalid aio option: %s", optarg);
+                exit(1);
+            }
             break;
         case 't':
             if (bdrv_parse_cache_mode(optarg, &flags, &writethrough) < 0) {
-- 
2.21.0

Re: [Qemu-devel] [Qemu-block] [PATCH v7 11/15] qemu-io: adds option to use aio engine

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 3943 bytes --]

On Mon, Jul 29, 2019 at 08:46:47PM +0530, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  qemu-io.c | 24 ++++++++++++++++++++----
>  1 file changed, 20 insertions(+), 4 deletions(-)
> 
> diff --git a/qemu-io.c b/qemu-io.c
> index f64eca6940..6568f0c369 100644
> --- a/qemu-io.c
> +++ b/qemu-io.c
> @@ -130,7 +130,8 @@ static void open_help(void)
>  " -C, -- use copy-on-read\n"
>  " -n, -- disable host cache, short for -t none\n"
>  " -U, -- force shared permissions\n"
> -" -k, -- use kernel AIO implementation (on Linux only)\n"
> +" -k, -- use kernel AIO implementation (Linux only, prefer use of -i)\n"
> +" -i, -- use AIO mode (threads, native or io_uring)"

Missing \n

>  " -t, -- use the given cache mode for the image\n"
>  " -d, -- use the given discard mode for the image\n"
>  " -o, -- options to be given to the block driver"
> @@ -172,7 +173,7 @@ static int open_f(BlockBackend *blk, int argc, char **argv)
>      QDict *opts;
>      bool force_share = false;
>  
> -    while ((c = getopt(argc, argv, "snCro:kt:d:U")) != -1) {
> +    while ((c = getopt(argc, argv, "snCro:kit:d:U")) != -1) {

'i' requires an argument so it must be "i:".

>          switch (c) {
>          case 's':
>              flags |= BDRV_O_SNAPSHOT;
> @@ -204,6 +205,13 @@ static int open_f(BlockBackend *blk, int argc, char **argv)
>                  return -EINVAL;
>              }
>              break;
> +        case 'i':
> +            if (bdrv_parse_aio(optarg, &flags) < 0) {
> +                error_report("Invalid aio option: %s", optarg);
> +                qemu_opts_reset(&empty_opts);
> +                return -EINVAL;
> +            }
> +            break;
>          case 'o':
>              if (imageOpts) {
>                  printf("--image-opts and 'open -o' are mutually exclusive\n");
> @@ -291,7 +299,9 @@ static void usage(const char *name)
>  "  -n, --nocache        disable host cache, short for -t none\n"
>  "  -C, --copy-on-read   enable copy-on-read\n"
>  "  -m, --misalign       misalign allocations for O_DIRECT\n"
> -"  -k, --native-aio     use kernel AIO implementation (on Linux only)\n"
> +"  -k, --native-aio     use kernel AIO implementation\n"
> +"                       (Linux only, prefer use of -i)\n"
> +"  -i, --aio=MODE       use AIO mode (threads, native or io_uring)\n"
>  "  -t, --cache=MODE     use the given cache mode for the image\n"
>  "  -d, --discard=MODE   use the given discard mode for the image\n"
>  "  -T, --trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n"
> @@ -489,7 +499,7 @@ static QemuOptsList file_opts = {
>  int main(int argc, char **argv)
>  {
>      int readonly = 0;
> -    const char *sopt = "hVc:d:f:rsnCmkt:T:U";
> +    const char *sopt = "hVc:d:f:rsnCmki:t:T:U";
>      const struct option lopt[] = {
>          { "help", no_argument, NULL, 'h' },
>          { "version", no_argument, NULL, 'V' },
> @@ -501,6 +511,7 @@ int main(int argc, char **argv)
>          { "copy-on-read", no_argument, NULL, 'C' },
>          { "misalign", no_argument, NULL, 'm' },
>          { "native-aio", no_argument, NULL, 'k' },
> +        { "aio", required_argument, NULL, 'i' },
>          { "discard", required_argument, NULL, 'd' },
>          { "cache", required_argument, NULL, 't' },
>          { "trace", required_argument, NULL, 'T' },
> @@ -567,6 +578,11 @@ int main(int argc, char **argv)
>              break;
>          case 'k':
>              flags |= BDRV_O_NATIVE_AIO;

Missing break statement.

> +        case 'i':
> +            if (bdrv_parse_aio(optarg, &flags) < 0) {
> +                error_report("Invalid aio option: %s", optarg);
> +                exit(1);
> +            }
>              break;
>          case 't':
>              if (bdrv_parse_cache_mode(optarg, &flags, &writethrough) < 0) {
> -- 
> 2.21.0
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] [PATCH v7 12/15] qemu-img: adds option to use aio engine for benchmarking

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
---
 qemu-img.c    | 10 +++++++++-
 qemu-img.texi |  5 ++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/qemu-img.c b/qemu-img.c
index 79983772de..3fc8dac0b1 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -4192,7 +4192,8 @@ static int img_bench(int argc, char **argv)
             {"force-share", no_argument, 0, 'U'},
             {0, 0, 0, 0}
         };
-        c = getopt_long(argc, argv, ":hc:d:f:no:qs:S:t:wU", long_options, NULL);
+        c = getopt_long(argc, argv, ":hc:d:f:ni:o:qs:S:t:wU", long_options,
+                        NULL);
         if (c == -1) {
             break;
         }
@@ -4234,6 +4235,13 @@ static int img_bench(int argc, char **argv)
             break;
         case 'n':
             flags |= BDRV_O_NATIVE_AIO;
+        case 'i':
+            ret = bdrv_parse_aio(optarg, &flags);
+            if (ret < 0) {
+                error_report("Invalid aio option: %s", optarg);
+                ret = -1;
+                goto out;
+            }
             break;
         case 'o':
         {
diff --git a/qemu-img.texi b/qemu-img.texi
index c8e9bba515..0a2eccea85 100644
--- a/qemu-img.texi
+++ b/qemu-img.texi
@@ -206,7 +206,7 @@ Command description:
 Amends the image format specific @var{options} for the image file
 @var{filename}. Not all file formats support this operation.
 
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] [-U] @var{filename}
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [-i @var{aio}][--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] [-U] @var{filename}
 
 Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
 specified, a write test is performed, otherwise a read test is performed.
@@ -227,6 +227,9 @@ If @code{-n} is specified, the native AIO backend is used if possible. On
 Linux, this option only works if @code{-t none} or @code{-t directsync} is
 specified as well.
 
+If @code{-i} is specified, aio option can be used to specify different AIO
+backends: @var{threads}, @var{native} or @var{io_uring}.
+
 For write tests, by default a buffer filled with zeros is written. This can be
 overridden with a pattern byte specified by @var{pattern}.
 
-- 
2.21.0

Re: [Qemu-devel] [Qemu-block] [PATCH v7 12/15] qemu-img: adds option to use aio engine for benchmarking

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 1039 bytes --]

On Mon, Jul 29, 2019 at 08:46:48PM +0530, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  qemu-img.c    | 10 +++++++++-
>  qemu-img.texi |  5 ++++-
>  2 files changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/qemu-img.c b/qemu-img.c
> index 79983772de..3fc8dac0b1 100644
> --- a/qemu-img.c
> +++ b/qemu-img.c
> @@ -4192,7 +4192,8 @@ static int img_bench(int argc, char **argv)
>              {"force-share", no_argument, 0, 'U'},
>              {0, 0, 0, 0}
>          };
> -        c = getopt_long(argc, argv, ":hc:d:f:no:qs:S:t:wU", long_options, NULL);
> +        c = getopt_long(argc, argv, ":hc:d:f:ni:o:qs:S:t:wU", long_options,
> +                        NULL);

Please update help() with documentation for -i.

>          if (c == -1) {
>              break;
>          }
> @@ -4234,6 +4235,13 @@ static int img_bench(int argc, char **argv)
>              break;
>          case 'n':
>              flags |= BDRV_O_NATIVE_AIO;

Missing break statement.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] [PATCH v7 13/15] qemu-nbd: adds option for aio engines

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
---
 qemu-nbd.c    | 12 ++++--------
 qemu-nbd.texi |  4 ++--
 2 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/qemu-nbd.c b/qemu-nbd.c
index a8cb39e510..7bb479f3c0 100644
--- a/qemu-nbd.c
+++ b/qemu-nbd.c
@@ -135,7 +135,7 @@ static void usage(const char *name)
 "                            '[ID_OR_NAME]'\n"
 "  -n, --nocache             disable host cache\n"
 "      --cache=MODE          set cache mode (none, writeback, ...)\n"
-"      --aio=MODE            set AIO mode (native or threads)\n"
+"      --aio=MODE            set AIO mode (native, io_uring or threads)\n"
 "      --discard=MODE        set discard mode (ignore, unmap)\n"
 "      --detect-zeroes=MODE  set detect-zeroes mode (off, on, unmap)\n"
 "      --image-opts          treat FILE as a full set of image options\n"
@@ -718,13 +718,9 @@ int main(int argc, char **argv)
                 exit(EXIT_FAILURE);
             }
             seen_aio = true;
-            if (!strcmp(optarg, "native")) {
-                flags |= BDRV_O_NATIVE_AIO;
-            } else if (!strcmp(optarg, "threads")) {
-                /* this is the default */
-            } else {
-               error_report("invalid aio mode `%s'", optarg);
-               exit(EXIT_FAILURE);
+            if (bdrv_parse_aio(optarg, &flags) < 0) {
+                error_report("Invalid aio mode '%s'", optarg);
+                exit(EXIT_FAILURE);
             }
             break;
         case QEMU_NBD_OPT_DISCARD:
diff --git a/qemu-nbd.texi b/qemu-nbd.texi
index 7f55657722..3ee3e4bdee 100644
--- a/qemu-nbd.texi
+++ b/qemu-nbd.texi
@@ -77,8 +77,8 @@ as an read-only device, @var{snapshot_param} format is
 The cache mode to be used with the file.  See the documentation of
 the emulator's @code{-drive cache=...} option for allowed values.
 @item --aio=@var{aio}
-Set the asynchronous I/O mode between @samp{threads} (the default)
-and @samp{native} (Linux only).
+Set the asynchronous I/O mode between @samp{threads} (the default),
+@samp{native} (Linux only) and @samp{io_uring} (Linux 5.1+).
 @item --discard=@var{discard}
 Control whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
 requests are ignored or passed to the filesystem.  @var{discard} is one of
-- 
2.21.0

Re: [Qemu-devel] [PATCH v7 13/15] qemu-nbd: adds option for aio engines

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 292 bytes --]

On Mon, Jul 29, 2019 at 08:46:49PM +0530, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  qemu-nbd.c    | 12 ++++--------
>  qemu-nbd.texi |  4 ++--
>  2 files changed, 6 insertions(+), 10 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [Qemu-devel] [PATCH v7 13/15] qemu-nbd: adds option for aio engines

[Eric Blake]

[-- Attachment #1.1: Type: text/plain, Size: 401 bytes --]

On 7/29/19 10:16 AM, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  qemu-nbd.c    | 12 ++++--------
>  qemu-nbd.texi |  4 ++--
>  2 files changed, 6 insertions(+), 10 deletions(-)

Acked-by: Eric Blake <eblake@redhat.com>

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3226
Virtualization:  qemu.org | libvirt.org


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] [PATCH v7 14/15] tests/qemu-iotests: enable testing with aio options

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
---
 tests/qemu-iotests/check      | 15 ++++++++++++++-
 tests/qemu-iotests/common.rc  | 14 ++++++++++++++
 tests/qemu-iotests/iotests.py |  9 ++++++++-
 3 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/tests/qemu-iotests/check b/tests/qemu-iotests/check
index c24874ff4a..1e398923fd 100755
--- a/tests/qemu-iotests/check
+++ b/tests/qemu-iotests/check
@@ -132,6 +132,7 @@ sortme=false
 expunge=true
 have_test_arg=false
 cachemode=false
+aiomode=false
 
 tmp="${TEST_DIR}"/$$
 rm -f $tmp.list $tmp.tmp $tmp.sed
@@ -141,6 +142,7 @@ export IMGFMT_GENERIC=true
 export IMGPROTO=file
 export IMGOPTS=""
 export CACHEMODE="writeback"
+export AIOMODE="threads"
 export QEMU_IO_OPTIONS=""
 export QEMU_IO_OPTIONS_NO_FMT=""
 export CACHEMODE_IS_DEFAULT=true
@@ -225,6 +227,11 @@ s/ .*//p
         CACHEMODE_IS_DEFAULT=false
         cachemode=false
         continue
+    elif $aiomode
+    then
+        AIOMODE="$r"
+        aiomode=false
+        continue
     fi
 
     xpand=true
@@ -269,6 +276,7 @@ other options
     -n                  show me, do not run tests
     -o options          -o options to pass to qemu-img create/convert
     -c mode             cache mode
+    -i mode             AIO mode
     -makecheck          pretty print output for make check
 
 testlist options
@@ -433,10 +441,13 @@ testlist options
             cachemode=true
             xpand=false
             ;;
+        -i)
+            aiomode=true
+            xpand=false
+            ;;
         -T)        # deprecated timestamp option
             xpand=false
             ;;
-
         -v)
             verbose=true
             xpand=false
@@ -515,6 +526,8 @@ done
 
 # Set qemu-io cache mode with $CACHEMODE we have
 QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --cache $CACHEMODE"
+# Set qemu-io aio mode with $AIOMODE we have
+QEMU_IO_OPTIONS="$QEMU_IO_OPTIONS --aio $AIOMODE"
 
 QEMU_IO_OPTIONS_NO_FMT="$QEMU_IO_OPTIONS"
 if [ "$IMGOPTSSYNTAX" != "true" ]; then
diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc
index 5502c3da2f..03f4a1cd7f 100644
--- a/tests/qemu-iotests/common.rc
+++ b/tests/qemu-iotests/common.rc
@@ -490,6 +490,20 @@ _default_cache_mode()
         return
     fi
 }
+_supported_aio_modes()
+{
+    for mode; do
+        if [ "$mode" = "$AIOMODE" ]; then
+            return
+        fi
+    done
+    _notrun "not suitable for aio mode: $AIOMODE"
+}
+_default_aio_mode()
+{
+    AIOMODE="$1"
+    QEMU_IO="$QEMU_IO --aio $1"
+}
 
 _unsupported_imgopts()
 {
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index ce74177ab1..76f1ab0945 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -58,6 +58,7 @@ imgproto = os.environ.get('IMGPROTO', 'file')
 test_dir = os.environ.get('TEST_DIR')
 output_dir = os.environ.get('OUTPUT_DIR', '.')
 cachemode = os.environ.get('CACHEMODE')
+aiomode = os.environ.get('AIOMODE')
 qemu_default_machine = os.environ.get('QEMU_DEFAULT_MACHINE')
 
 socket_scm_helper = os.environ.get('SOCKET_SCM_HELPER', 'socket_scm_helper')
@@ -457,6 +458,7 @@ class VM(qtest.QEMUQtestMachine):
             options.append('file=%s' % path)
             options.append('format=%s' % format)
             options.append('cache=%s' % cachemode)
+            options.append('aio=%s' % aiomode)
 
         if opts:
             options.append(opts)
@@ -799,6 +801,10 @@ def verify_cache_mode(supported_cache_modes=[]):
     if supported_cache_modes and (cachemode not in supported_cache_modes):
         notrun('not suitable for this cache mode: %s' % cachemode)
 
+def verify_aio_mode(supported_aio_modes=[]):
+    if supported_aio_modes and (aiomode not in supported_aio_modes):
+        notrun('not suitable for this aio mode: %s' % aiomode)
+
 def supports_quorum():
     return 'quorum' in qemu_img_pipe('--help')
 
@@ -843,7 +849,7 @@ def skip_if_unsupported(required_formats=[], read_only=False):
     return skip_test_decorator
 
 def main(supported_fmts=[], supported_oses=['linux'], supported_cache_modes=[],
-         unsupported_fmts=[]):
+        supported_aio_modes=[], unsupported_fmts=[]):
     '''Run tests'''
 
     global debug
@@ -861,6 +867,7 @@ def main(supported_fmts=[], supported_oses=['linux'], supported_cache_modes=[],
     verify_image_format(supported_fmts, unsupported_fmts)
     verify_platform(supported_oses)
     verify_cache_mode(supported_cache_modes)
+    verify_aio_mode(supported_aio_modes)
 
     if debug:
         output = sys.stdout
-- 
2.21.0

Re: [Qemu-devel] [Qemu-block] [PATCH v7 14/15] tests/qemu-iotests: enable testing with aio options

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 385 bytes --]

On Mon, Jul 29, 2019 at 08:46:50PM +0530, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  tests/qemu-iotests/check      | 15 ++++++++++++++-
>  tests/qemu-iotests/common.rc  | 14 ++++++++++++++
>  tests/qemu-iotests/iotests.py |  9 ++++++++-
>  3 files changed, 36 insertions(+), 2 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[Qemu-devel] [PATCH v7 15/15] tests/qemu-iotests: use AIOMODE with various tests

[Aarushi Mehta]

Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
---
 tests/qemu-iotests/028 |  3 ++-
 tests/qemu-iotests/058 |  2 +-
 tests/qemu-iotests/089 |  4 ++--
 tests/qemu-iotests/091 |  7 ++++---
 tests/qemu-iotests/109 |  3 ++-
 tests/qemu-iotests/147 |  5 +++--
 tests/qemu-iotests/181 | 10 +++++-----
 tests/qemu-iotests/183 |  7 ++++---
 tests/qemu-iotests/185 | 17 ++++++++++++-----
 tests/qemu-iotests/200 |  3 ++-
 tests/qemu-iotests/201 | 10 +++++-----
 11 files changed, 42 insertions(+), 29 deletions(-)

diff --git a/tests/qemu-iotests/028 b/tests/qemu-iotests/028
index 01f495912f..59e7b670ed 100755
--- a/tests/qemu-iotests/028
+++ b/tests/qemu-iotests/028
@@ -108,7 +108,8 @@ echo block-backup
 echo
 
 qemu_comm_method="monitor"
-_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},id=disk
+_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=${AIOMODE},\
+id=disk
 h=$QEMU_HANDLE
 QEMU_COMM_TIMEOUT=1
 
diff --git a/tests/qemu-iotests/058 b/tests/qemu-iotests/058
index 8c3212a72f..38d1ed90c0 100755
--- a/tests/qemu-iotests/058
+++ b/tests/qemu-iotests/058
@@ -64,7 +64,7 @@ nbd_snapshot_img="nbd:unix:$nbd_unix_socket"
 converted_image=$TEST_IMG.converted
 
 # Use -f raw instead of -f $IMGFMT for the NBD connection
-QEMU_IO_NBD="$QEMU_IO -f raw --cache=$CACHEMODE"
+QEMU_IO_NBD="$QEMU_IO -f raw --cache=$CACHEMODE --aio=$AIOMODE"
 
 echo
 echo "== preparing image =="
diff --git a/tests/qemu-iotests/089 b/tests/qemu-iotests/089
index ad029f1f09..059ad75e28 100755
--- a/tests/qemu-iotests/089
+++ b/tests/qemu-iotests/089
@@ -64,7 +64,7 @@ $QEMU_IO -c 'write -P 42 0 512' -c 'write -P 23 512 512' \
 
 $QEMU_IMG convert -f raw -O $IMGFMT "$TEST_IMG.base" "$TEST_IMG"
 
-$QEMU_IO_PROG --cache $CACHEMODE \
+$QEMU_IO_PROG --cache $CACHEMODE --aio $AIOMODE \
          -c 'read -P 42 0 512' -c 'read -P 23 512 512' \
          -c 'read -P 66 1024 512' "json:{
     \"driver\": \"$IMGFMT\",
@@ -111,7 +111,7 @@ $QEMU_IO -c 'write -P 42 0x38000 512' "$TEST_IMG" | _filter_qemu_io
 
 # The "image.filename" part tests whether "a": { "b": "c" } and "a.b": "c" do
 # the same (which they should).
-$QEMU_IO_PROG --cache $CACHEMODE \
+$QEMU_IO_PROG --cache $CACHEMODE --aio $AIOMODE  \
      -c 'read -P 42 0x38000 512' "json:{
     \"driver\": \"$IMGFMT\",
     \"file\": {
diff --git a/tests/qemu-iotests/091 b/tests/qemu-iotests/091
index d62ef18a02..78741d3fe7 100755
--- a/tests/qemu-iotests/091
+++ b/tests/qemu-iotests/091
@@ -60,14 +60,15 @@ echo === Starting QEMU VM1 ===
 echo
 
 qemu_comm_method="monitor"
-_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},id=disk
+_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=${AIOMODE},\
+             id=disk
 h1=$QEMU_HANDLE
 
 echo
 echo === Starting QEMU VM2 ===
 echo
-_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},id=disk \
-             -incoming "exec: cat '${MIG_FIFO}'"
+_launch_qemu -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=${AIOMODE},\
+             id=disk -incoming "exec: cat '${MIG_FIFO}'"
 h2=$QEMU_HANDLE
 
 echo
diff --git a/tests/qemu-iotests/109 b/tests/qemu-iotests/109
index 9897ceb6cd..451709689a 100755
--- a/tests/qemu-iotests/109
+++ b/tests/qemu-iotests/109
@@ -52,7 +52,8 @@ run_qemu()
     local qmp_format="$3"
     local qmp_event="$4"
 
-    _launch_qemu -drive file="${source_img}",format=raw,cache=${CACHEMODE},id=src
+    _launch_qemu -drive file="${source_img}",format=raw,cache=${CACHEMODE},\
+                 aio=${AIOMODE},id=src
     _send_qemu_cmd $QEMU_HANDLE "{ 'execute': 'qmp_capabilities' }" "return"
 
     _send_qemu_cmd $QEMU_HANDLE \
diff --git a/tests/qemu-iotests/147 b/tests/qemu-iotests/147
index 2d84fddb01..632973b23c 100755
--- a/tests/qemu-iotests/147
+++ b/tests/qemu-iotests/147
@@ -24,7 +24,7 @@ import socket
 import stat
 import time
 import iotests
-from iotests import cachemode, imgfmt, qemu_img, qemu_nbd, qemu_nbd_early_pipe
+from iotests import cachemode, aiomode, imgfmt, qemu_img, qemu_nbd, qemu_nbd_early_pipe
 
 NBD_PORT_START      = 32768
 NBD_PORT_END        = NBD_PORT_START + 1024
@@ -134,7 +134,8 @@ class BuiltinNBD(NBDBlockdevAddBase):
         self.server.add_drive_raw('if=none,id=nbd-export,' +
                                   'file=%s,' % test_img +
                                   'format=%s,' % imgfmt +
-                                  'cache=%s' % cachemode)
+                                  'cache=%s' % cachemode +
+                                  'aio=%s' % aiomode)
         self.server.launch()
 
     def tearDown(self):
diff --git a/tests/qemu-iotests/181 b/tests/qemu-iotests/181
index e317e63422..547c1b47b0 100755
--- a/tests/qemu-iotests/181
+++ b/tests/qemu-iotests/181
@@ -58,21 +58,21 @@ qemu_comm_method="monitor"
 
 if [ "$IMGOPTSSYNTAX" = "true" ]; then
     _launch_qemu \
-        -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk
+        -drive "${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,id=disk
 else
     _launch_qemu \
-        -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk
+        -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,driver=$IMGFMT,id=disk
 fi
 src=$QEMU_HANDLE
 
 if [ "$IMGOPTSSYNTAX" = "true" ]; then
     _launch_qemu \
-        -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk \
+        -drive "${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,id=disk \
         -incoming "unix:${MIG_SOCKET}"
 else
     _launch_qemu \
-        -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk \
-        -incoming "unix:${MIG_SOCKET}"
+        -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,driver=$IMGFMT,\
+        id=disk -incoming "unix:${MIG_SOCKET}"
 fi
 dest=$QEMU_HANDLE
 
diff --git a/tests/qemu-iotests/183 b/tests/qemu-iotests/183
index fbe5a99beb..b16db9466d 100755
--- a/tests/qemu-iotests/183
+++ b/tests/qemu-iotests/183
@@ -56,13 +56,14 @@ echo
 qemu_comm_method="qmp"
 
 _launch_qemu \
-    -drive file="${TEST_IMG}",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    -drive file="${TEST_IMG}",cache=$CACHEMODE,aio=$AIOMODE,\
+    driver=$IMGFMT,id=disk
 src=$QEMU_HANDLE
 _send_qemu_cmd $src "{ 'execute': 'qmp_capabilities' }" 'return'
 
 _launch_qemu \
-    -drive file="${TEST_IMG}.dest",cache=$CACHEMODE,driver=$IMGFMT,id=disk \
-    -incoming "unix:${MIG_SOCKET}"
+    -drive file="${TEST_IMG}.dest",cache=$CACHEMODE,aio=$AIOMODE,\
+    driver=$IMGFMT,id=disk -incoming "unix:${MIG_SOCKET}"
 dest=$QEMU_HANDLE
 _send_qemu_cmd $dest "{ 'execute': 'qmp_capabilities' }" 'return'
 
diff --git a/tests/qemu-iotests/185 b/tests/qemu-iotests/185
index 454ff600cc..1c74a0ef5a 100755
--- a/tests/qemu-iotests/185
+++ b/tests/qemu-iotests/185
@@ -54,7 +54,8 @@ echo
 qemu_comm_method="qmp"
 
 _launch_qemu \
-    -drive file="${TEST_IMG}.base",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    -drive file="${TEST_IMG}.base",cache=$CACHEMODE,aio=$AIOMODE,\
+    driver=$IMGFMT,id=disk
 h=$QEMU_HANDLE
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" 'return'
 
@@ -125,7 +126,8 @@ echo === Start active commit job and exit qemu ===
 echo
 
 _launch_qemu \
-    -drive file="${TEST_IMG}",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    -drive file="${TEST_IMG}",cache=$CACHEMODE,aio=$AIOMODE,driver=$IMGFMT,\
+    id=disk
 h=$QEMU_HANDLE
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" 'return'
 
@@ -147,7 +149,8 @@ echo === Start mirror job and exit qemu ===
 echo
 
 _launch_qemu \
-    -drive file="${TEST_IMG}",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    -drive file="${TEST_IMG}",cache=$CACHEMODE,aio=$AIOMODE,driver=$IMGFMT,\
+    id=disk
 h=$QEMU_HANDLE
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" 'return'
 
@@ -172,7 +175,9 @@ echo === Start backup job and exit qemu ===
 echo
 
 _launch_qemu \
-    -drive file="${TEST_IMG}",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    _launch_qemu \
+    -drive file="${TEST_IMG}",cache=$CACHEMODE,aio=$AIOMODE,driver=$IMGFMT,\
+    id=disk
 h=$QEMU_HANDLE
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" 'return'
 
@@ -196,7 +201,9 @@ echo === Start streaming job and exit qemu ===
 echo
 
 _launch_qemu \
-    -drive file="${TEST_IMG}",cache=$CACHEMODE,driver=$IMGFMT,id=disk
+    _launch_qemu \
+    -drive file="${TEST_IMG}",cache=$CACHEMODE,aio=$AIOMODE,driver=$IMGFMT,\
+    id=disk
 h=$QEMU_HANDLE
 _send_qemu_cmd $h "{ 'execute': 'qmp_capabilities' }" 'return'
 
diff --git a/tests/qemu-iotests/200 b/tests/qemu-iotests/200
index 72d431f251..b554dd947b 100755
--- a/tests/qemu-iotests/200
+++ b/tests/qemu-iotests/200
@@ -66,7 +66,8 @@ echo === Starting QEMU VM ===
 echo
 qemu_comm_method="qmp"
 _launch_qemu -object iothread,id=iothread0 $virtio_scsi \
-             -drive file="${TEST_IMG}",media=disk,if=none,cache=$CACHEMODE,id=drive_sysdisk,format=$IMGFMT \
+             -drive file="${TEST_IMG}",media=disk,if=none,cache=$CACHEMODE,\
+             aio=$AIOMODE,id=drive_sysdisk,format=$IMGFMT \
              -device scsi-hd,drive=drive_sysdisk,bus=scsi0.0,id=sysdisk,bootindex=0
 h1=$QEMU_HANDLE
 
diff --git a/tests/qemu-iotests/201 b/tests/qemu-iotests/201
index 7abf740fe4..48837c4f30 100755
--- a/tests/qemu-iotests/201
+++ b/tests/qemu-iotests/201
@@ -58,21 +58,21 @@ qemu_comm_method="monitor"
 
 if [ "$IMGOPTSSYNTAX" = "true" ]; then
     _launch_qemu \
-        -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk
+        -drive "${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,id=disk
 else
     _launch_qemu \
-        -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk
+        -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,driver=$IMGFMT,id=disk
 fi
 src=$QEMU_HANDLE
 
 if [ "$IMGOPTSSYNTAX" = "true" ]; then
     _launch_qemu \
-        -drive "${TEST_IMG}",cache=${CACHEMODE},id=disk \
+        -drive "${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,id=disk \
         -incoming "unix:${MIG_SOCKET}"
 else
     _launch_qemu \
-        -drive file="${TEST_IMG}",cache=${CACHEMODE},driver=$IMGFMT,id=disk \
-        -incoming "unix:${MIG_SOCKET}"
+        -drive file="${TEST_IMG}",cache=${CACHEMODE},aio=$AIOMODE,driver=$IMGFMT,\
+        id=disk -incoming "unix:${MIG_SOCKET}"
 fi
 dest=$QEMU_HANDLE
 
-- 
2.21.0

Re: [Qemu-devel] [Qemu-block] [PATCH v7 15/15] tests/qemu-iotests: use AIOMODE with various tests

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 655 bytes --]

On Mon, Jul 29, 2019 at 08:46:51PM +0530, Aarushi Mehta wrote:
> Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com>
> ---
>  tests/qemu-iotests/028 |  3 ++-
>  tests/qemu-iotests/058 |  2 +-
>  tests/qemu-iotests/089 |  4 ++--
>  tests/qemu-iotests/091 |  7 ++++---
>  tests/qemu-iotests/109 |  3 ++-
>  tests/qemu-iotests/147 |  5 +++--
>  tests/qemu-iotests/181 | 10 +++++-----
>  tests/qemu-iotests/183 |  7 ++++---
>  tests/qemu-iotests/185 | 17 ++++++++++++-----
>  tests/qemu-iotests/200 |  3 ++-
>  tests/qemu-iotests/201 | 10 +++++-----
>  11 files changed, 42 insertions(+), 29 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]