qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>,
	mikhail.sennikovskii@cloud.ionos.com, dgilbert@redhat.com,
	stefanha@redhat.com
Subject: [RFC 2/2] virtio-net: use post load hook
Date: Thu, 10 Oct 2019 14:04:37 -0400	[thread overview]
Message-ID: <20191010180412.26236-2-mst@redhat.com> (raw)
In-Reply-To: <20191010180412.26236-1-mst@redhat.com>

Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET
command are not preserved on VM migration.
Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES)
get enabled.
What happens is: first the VirtIONet::curr_guest_offloads gets restored
and offloads are getting set correctly:

 #0  qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474
 #1  virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
 #2  virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334
 #3  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11)
     at migration/vmstate.c:168
 #4  virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197
 #5  virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
 #6  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
 #7  vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
 #8  qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
 #9  qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449

However later on the features are getting restored, and offloads get reset to
everything supported by features:

 #0  qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474
 #1  virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
 #2  virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773
 #3  virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052
 #4  virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220
 #5  virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
 #6  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
 #7  vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
 #8  qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
 #9  qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449

Fix this by pushing out offload initialization to the new post load hook.

Reported-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/net/virtio-net.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 9f11422337..62fb858e2d 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -2333,10 +2333,6 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
         n->curr_guest_offloads = virtio_net_supported_guest_offloads(n);
     }
 
-    if (peer_has_vnet_hdr(n)) {
-        virtio_net_apply_guest_offloads(n);
-    }
-
     virtio_net_set_queues(n);
 
     /* Find the first multicast entry in the saved MAC filter */
@@ -2370,6 +2366,15 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
     return 0;
 }
 
+static int virtio_net_post_load_virtio(VirtIODevice *vdev)
+{
+    if (peer_has_vnet_hdr(n)) {
+        virtio_net_apply_guest_offloads(n);
+    }
+
+    return 0;
+}
+
 /* tx_waiting field of a VirtIONetQueue */
 static const VMStateDescription vmstate_virtio_net_queue_tx_waiting = {
     .name = "virtio-net-queue-tx_waiting",
@@ -2912,6 +2917,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data)
     vdc->guest_notifier_mask = virtio_net_guest_notifier_mask;
     vdc->guest_notifier_pending = virtio_net_guest_notifier_pending;
     vdc->legacy_features |= (0x1 << VIRTIO_NET_F_GSO);
+    vdc->post_load = virtio_net_post_load_virtio;
     vdc->vmsd = &vmstate_virtio_net_device;
 }
 
-- 
MST



  reply	other threads:[~2019-10-10 18:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 18:04 [RFC 1/2] virtio: new post_load hook Michael S. Tsirkin
2019-10-10 18:04 ` Michael S. Tsirkin [this message]
2019-10-11  2:51   ` [RFC 2/2] virtio-net: use post load hook Jason Wang
2019-10-11  9:46   ` Mikhail Sennikovsky
2019-10-11  9:51     ` Michael S. Tsirkin
2019-10-11  9:58       ` Mikhail Sennikovsky
2019-10-11 10:08         ` Michael S. Tsirkin
2019-10-11 10:30           ` Mikhail Sennikovsky
2019-10-11 10:34             ` Mikhail Sennikovsky
2019-10-11 12:51               ` Michael S. Tsirkin
2019-10-11 12:34             ` Michael S. Tsirkin
2019-10-11 13:15 ` [RFC 1/2] virtio: new post_load hook Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010180412.26236-2-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=mikhail.sennikovskii@cloud.ionos.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).