Re: [RFC 2/2] virtio-net: use post load hook

[Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>]

Note that the virtio_net_set_features gets also called from the
virtio_pci_common_write when guest does virtio device configuration.
In that case the curr_guest_offloads are still expected to be reset.

Mikhail

Am Fr., 11. Okt. 2019 um 11:51 Uhr schrieb Michael S. Tsirkin <mst@redhat.com>:
>
> On Fri, Oct 11, 2019 at 11:46:22AM +0200, Mikhail Sennikovsky wrote:
> > Hi Michael,
> >
> > Unfortunately your approach will not work, because the
> > VirtIONet::curr_guest_offloads would still be reset in
> > virtio_net_set_features:
> > --
> > if (n->has_vnet_hdr) {
> >     n->curr_guest_offloads =
> >         virtio_net_guest_offloads_by_features(features);
>
> So let's move that part to the new hook too.
>
> > --
> > ( https://github.com/qemu/qemu/blob/master/hw/net/virtio-net.c#L774 )
> >
> > I.e. although virtio_net_apply_guest_offloads would now be called
> > after the virtio_net_set_features, by the time it is called the
> > VirtIONet::curr_guest_offloads would be reset to a full list of
> > features.
> >
> > Regards,
> > Mikhail
> >
> > Am Do., 10. Okt. 2019 um 20:04 Uhr schrieb Michael S. Tsirkin <mst@redhat.com>:
> > >
> > > Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET
> > > command are not preserved on VM migration.
> > > Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES)
> > > get enabled.
> > > What happens is: first the VirtIONet::curr_guest_offloads gets restored
> > > and offloads are getting set correctly:
> > >
> > >  #0  qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474
> > >  #1  virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
> > >  #2  virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334
> > >  #3  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11)
> > >      at migration/vmstate.c:168
> > >  #4  virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197
> > >  #5  virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
> > >  #6  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
> > >  #7  vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
> > >  #8  qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
> > >  #9  qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
> > >  #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
> > >  #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449
> > >
> > > However later on the features are getting restored, and offloads get reset to
> > > everything supported by features:
> > >
> > >  #0  qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474
> > >  #1  virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720
> > >  #2  virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773
> > >  #3  virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052
> > >  #4  virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220
> > >  #5  virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036
> > >  #6  vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143
> > >  #7  vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829
> > >  #8  qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211
> > >  #9  qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395
> > >  #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467
> > >  #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449
> > >
> > > Fix this by pushing out offload initialization to the new post load hook.
> > >
> > > Reported-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com>
> > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> > > ---
> > >  hw/net/virtio-net.c | 14 ++++++++++----
> > >  1 file changed, 10 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> > > index 9f11422337..62fb858e2d 100644
> > > --- a/hw/net/virtio-net.c
> > > +++ b/hw/net/virtio-net.c
> > > @@ -2333,10 +2333,6 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
> > >          n->curr_guest_offloads = virtio_net_supported_guest_offloads(n);
> > >      }
> > >
> > > -    if (peer_has_vnet_hdr(n)) {
> > > -        virtio_net_apply_guest_offloads(n);
> > > -    }
> > > -
> > >      virtio_net_set_queues(n);
> > >
> > >      /* Find the first multicast entry in the saved MAC filter */
> > > @@ -2370,6 +2366,15 @@ static int virtio_net_post_load_device(void *opaque, int version_id)
> > >      return 0;
> > >  }
> > >
> > > +static int virtio_net_post_load_virtio(VirtIODevice *vdev)
> > > +{
> > > +    if (peer_has_vnet_hdr(n)) {
> > > +        virtio_net_apply_guest_offloads(n);
> > > +    }
> > > +
> > > +    return 0;
> > > +}
> > > +
> > >  /* tx_waiting field of a VirtIONetQueue */
> > >  static const VMStateDescription vmstate_virtio_net_queue_tx_waiting = {
> > >      .name = "virtio-net-queue-tx_waiting",
> > > @@ -2912,6 +2917,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data)
> > >      vdc->guest_notifier_mask = virtio_net_guest_notifier_mask;
> > >      vdc->guest_notifier_pending = virtio_net_guest_notifier_pending;
> > >      vdc->legacy_features |= (0x1 << VIRTIO_NET_F_GSO);
> > > +    vdc->post_load = virtio_net_post_load_virtio;
> > >      vdc->vmsd = &vmstate_virtio_net_device;
> > >  }
> > >
> > > --
> > > MST
> > >