* [PATCH v7 0/4] colo: Add support for continuous replication
@ 2019-10-25 17:04 Lukas Straub
0 siblings, 0 replies; 8+ messages in thread
From: Lukas Straub @ 2019-10-25 17:04 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, qemu-block, Wen Congyang, Jason Wang, Max Reitz,
Zhang Chen, Xie Changlong
Hello Everyone,
These Patches add support for continuous replication to colo. This means
that after the Primary fails and the Secondary did a failover, the Secondary
can then become Primary and resume replication to a new Secondary.
Regards,
Lukas Straub
v7:
- clarify meaning of ip's in documentation and note that active and hidden
images just need to be created once
- reverted removal of bdrv_is_root_node(top_bs) in replication and adjusted
the top-id= parameter in documentation acordingly
v6:
- documented the position= and insert= options
- renamed replication test
- clarified documentation by using different ip's for primary and secondary
- added Reviewed-by tags
v5:
- change syntax for the position= parameter
- fix spelling mistake
v4:
- fix checkpatch.pl warnings
v3:
- add test for replication changes
- check if the filter to be inserted before/behind belongs to the same interface
- fix the error message for the position= parameter
- rename term "after" -> "behind" and variable "insert_before" -> "insert_before_flag"
- document the quorum node on the secondary side
- simplify quorum parameters in documentation
- remove trailing spaces in documentation
- clarify the testing procedure in documentation
v2:
- fix email formating
- fix checkpatch.pl warnings
- fix patchew error
- clearer commit messages
Lukas Straub (4):
block/replication.c: Ignore requests after failover
tests/test-replication.c: Add test for for secondary node continuing
replication
net/filter.c: Add Options to insert filters anywhere in the filter
list
colo: Update Documentation for continuous replication
block/replication.c | 35 +++++-
docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++----------
docs/block-replication.txt | 28 +++--
include/net/filter.h | 2 +
net/filter.c | 92 ++++++++++++++-
qemu-options.hx | 31 ++++-
tests/test-replication.c | 52 +++++++++
7 files changed, 389 insertions(+), 75 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 0/4] colo: Add support for continuous replication
@ 2019-10-25 17:06 Lukas Straub
2019-11-13 16:35 ` Lukas Straub
0 siblings, 1 reply; 8+ messages in thread
From: Lukas Straub @ 2019-10-25 17:06 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, qemu-block, Wen Congyang, Jason Wang, Max Reitz,
Zhang Chen, Xie Changlong
Hello Everyone,
These Patches add support for continuous replication to colo. This means
that after the Primary fails and the Secondary did a failover, the Secondary
can then become Primary and resume replication to a new Secondary.
Regards,
Lukas Straub
v7:
- clarify meaning of ip's in documentation and note that active and hidden
images just need to be created once
- reverted removal of bdrv_is_root_node(top_bs) in replication and adjusted
the top-id= parameter in documentation acordingly
v6:
- documented the position= and insert= options
- renamed replication test
- clarified documentation by using different ip's for primary and secondary
- added Reviewed-by tags
v5:
- change syntax for the position= parameter
- fix spelling mistake
v4:
- fix checkpatch.pl warnings
v3:
- add test for replication changes
- check if the filter to be inserted before/behind belongs to the same interface
- fix the error message for the position= parameter
- rename term "after" -> "behind" and variable "insert_before" -> "insert_before_flag"
- document the quorum node on the secondary side
- simplify quorum parameters in documentation
- remove trailing spaces in documentation
- clarify the testing procedure in documentation
v2:
- fix email formating
- fix checkpatch.pl warnings
- fix patchew error
- clearer commit messages
Lukas Straub (4):
block/replication.c: Ignore requests after failover
tests/test-replication.c: Add test for for secondary node continuing
replication
net/filter.c: Add Options to insert filters anywhere in the filter
list
colo: Update Documentation for continuous replication
block/replication.c | 35 +++++-
docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++----------
docs/block-replication.txt | 28 +++--
include/net/filter.h | 2 +
net/filter.c | 92 ++++++++++++++-
qemu-options.hx | 31 ++++-
tests/test-replication.c | 52 +++++++++
7 files changed, 389 insertions(+), 75 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 0/4] colo: Add support for continuous replication
2019-10-25 17:06 Lukas Straub
@ 2019-11-13 16:35 ` Lukas Straub
2019-11-19 12:28 ` Zhang, Chen
0 siblings, 1 reply; 8+ messages in thread
From: Lukas Straub @ 2019-11-13 16:35 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, qemu-block, Wen Congyang, Jason Wang, Max Reitz,
Zhang Chen, Xie Changlong
On Fri, 25 Oct 2019 19:06:31 +0200
Lukas Straub <lukasstraub2@web.de> wrote:
> Hello Everyone,
> These Patches add support for continuous replication to colo. This means
> that after the Primary fails and the Secondary did a failover, the Secondary
> can then become Primary and resume replication to a new Secondary.
>
> Regards,
> Lukas Straub
>
> v7:
> - clarify meaning of ip's in documentation and note that active and hidden
> images just need to be created once
> - reverted removal of bdrv_is_root_node(top_bs) in replication and adjusted
> the top-id= parameter in documentation acordingly
>
> v6:
> - documented the position= and insert= options
> - renamed replication test
> - clarified documentation by using different ip's for primary and secondary
> - added Reviewed-by tags
>
> v5:
> - change syntax for the position= parameter
> - fix spelling mistake
>
> v4:
> - fix checkpatch.pl warnings
>
> v3:
> - add test for replication changes
> - check if the filter to be inserted before/behind belongs to the same interface
> - fix the error message for the position= parameter
> - rename term "after" -> "behind" and variable "insert_before" -> "insert_before_flag"
> - document the quorum node on the secondary side
> - simplify quorum parameters in documentation
> - remove trailing spaces in documentation
> - clarify the testing procedure in documentation
>
> v2:
> - fix email formating
> - fix checkpatch.pl warnings
> - fix patchew error
> - clearer commit messages
>
>
> Lukas Straub (4):
> block/replication.c: Ignore requests after failover
> tests/test-replication.c: Add test for for secondary node continuing
> replication
> net/filter.c: Add Options to insert filters anywhere in the filter
> list
> colo: Update Documentation for continuous replication
>
> block/replication.c | 35 +++++-
> docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++----------
> docs/block-replication.txt | 28 +++--
> include/net/filter.h | 2 +
> net/filter.c | 92 ++++++++++++++-
> qemu-options.hx | 31 ++++-
> tests/test-replication.c | 52 +++++++++
> 7 files changed, 389 insertions(+), 75 deletions(-)
>
Hello Everyone,
So I guess this is ready for merging or will that have to wait until the 4.2 release is done?
Regards,
Lukas Straub
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v7 0/4] colo: Add support for continuous replication
2019-11-13 16:35 ` Lukas Straub
@ 2019-11-19 12:28 ` Zhang, Chen
2019-11-19 15:03 ` Jason Wang
0 siblings, 1 reply; 8+ messages in thread
From: Zhang, Chen @ 2019-11-19 12:28 UTC (permalink / raw)
To: Lukas Straub, qemu-devel
Cc: Kevin Wolf, qemu-block, Wen Congyang, Jason Wang, Max Reitz,
Xie Changlong
> -----Original Message-----
> From: Lukas Straub <lukasstraub2@web.de>
> Sent: Thursday, November 14, 2019 12:36 AM
> To: qemu-devel <qemu-devel@nongnu.org>
> Cc: Zhang, Chen <chen.zhang@intel.com>; Jason Wang
> <jasowang@redhat.com>; Wen Congyang <wencongyang2@huawei.com>;
> Xie Changlong <xiechanglong.d@gmail.com>; Kevin Wolf
> <kwolf@redhat.com>; Max Reitz <mreitz@redhat.com>; qemu-block
> <qemu-block@nongnu.org>
> Subject: Re: [PATCH v7 0/4] colo: Add support for continuous replication
>
> On Fri, 25 Oct 2019 19:06:31 +0200
> Lukas Straub <lukasstraub2@web.de> wrote:
>
> > Hello Everyone,
> > These Patches add support for continuous replication to colo. This
> > means that after the Primary fails and the Secondary did a failover,
> > the Secondary can then become Primary and resume replication to a new
> Secondary.
> >
> > Regards,
> > Lukas Straub
> >
> > v7:
> > - clarify meaning of ip's in documentation and note that active and hidden
> > images just need to be created once
> > - reverted removal of bdrv_is_root_node(top_bs) in replication and
> adjusted
> > the top-id= parameter in documentation acordingly
> >
> > v6:
> > - documented the position= and insert= options
> > - renamed replication test
> > - clarified documentation by using different ip's for primary and
> > secondary
> > - added Reviewed-by tags
> >
> > v5:
> > - change syntax for the position= parameter
> > - fix spelling mistake
> >
> > v4:
> > - fix checkpatch.pl warnings
> >
> > v3:
> > - add test for replication changes
> > - check if the filter to be inserted before/behind belongs to the
> > same interface
> > - fix the error message for the position= parameter
> > - rename term "after" -> "behind" and variable "insert_before" ->
> "insert_before_flag"
> > - document the quorum node on the secondary side
> > - simplify quorum parameters in documentation
> > - remove trailing spaces in documentation
> > - clarify the testing procedure in documentation
> >
> > v2:
> > - fix email formating
> > - fix checkpatch.pl warnings
> > - fix patchew error
> > - clearer commit messages
> >
> >
> > Lukas Straub (4):
> > block/replication.c: Ignore requests after failover
> > tests/test-replication.c: Add test for for secondary node continuing
> > replication
> > net/filter.c: Add Options to insert filters anywhere in the filter
> > list
> > colo: Update Documentation for continuous replication
> >
> > block/replication.c | 35 +++++-
> > docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++----------
> > docs/block-replication.txt | 28 +++--
> > include/net/filter.h | 2 +
> > net/filter.c | 92 ++++++++++++++-
> > qemu-options.hx | 31 ++++-
> > tests/test-replication.c | 52 +++++++++
> > 7 files changed, 389 insertions(+), 75 deletions(-)
> >
>
> Hello Everyone,
> So I guess this is ready for merging or will that have to wait until the 4.2
> release is done?
Due to Qemu 4.2 release schedule, after soft feature freeze(Oct29) the master branch does not accept feature changes.
But I don't know if sub-maintainer(block or net) can queue this series first then merge it after 4.2 release?
Thanks
Zhang Chen
>
> Regards,
> Lukas Straub
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 0/4] colo: Add support for continuous replication
2019-11-19 12:28 ` Zhang, Chen
@ 2019-11-19 15:03 ` Jason Wang
2019-11-20 1:31 ` Zhang, Chen
0 siblings, 1 reply; 8+ messages in thread
From: Jason Wang @ 2019-11-19 15:03 UTC (permalink / raw)
To: Zhang, Chen, Lukas Straub, qemu-devel
Cc: Kevin Wolf, Wen Congyang, Xie Changlong, qemu-block, Max Reitz
On 2019/11/19 下午8:28, Zhang, Chen wrote:
>
>> -----Original Message-----
>> From: Lukas Straub <lukasstraub2@web.de>
>> Sent: Thursday, November 14, 2019 12:36 AM
>> To: qemu-devel <qemu-devel@nongnu.org>
>> Cc: Zhang, Chen <chen.zhang@intel.com>; Jason Wang
>> <jasowang@redhat.com>; Wen Congyang <wencongyang2@huawei.com>;
>> Xie Changlong <xiechanglong.d@gmail.com>; Kevin Wolf
>> <kwolf@redhat.com>; Max Reitz <mreitz@redhat.com>; qemu-block
>> <qemu-block@nongnu.org>
>> Subject: Re: [PATCH v7 0/4] colo: Add support for continuous replication
>>
>> On Fri, 25 Oct 2019 19:06:31 +0200
>> Lukas Straub <lukasstraub2@web.de> wrote:
>>
>>> Hello Everyone,
>>> These Patches add support for continuous replication to colo. This
>>> means that after the Primary fails and the Secondary did a failover,
>>> the Secondary can then become Primary and resume replication to a new
>> Secondary.
>>> Regards,
>>> Lukas Straub
>>>
>>> v7:
>>> - clarify meaning of ip's in documentation and note that active and hidden
>>> images just need to be created once
>>> - reverted removal of bdrv_is_root_node(top_bs) in replication and
>> adjusted
>>> the top-id= parameter in documentation acordingly
>>>
>>> v6:
>>> - documented the position= and insert= options
>>> - renamed replication test
>>> - clarified documentation by using different ip's for primary and
>>> secondary
>>> - added Reviewed-by tags
>>>
>>> v5:
>>> - change syntax for the position= parameter
>>> - fix spelling mistake
>>>
>>> v4:
>>> - fix checkpatch.pl warnings
>>>
>>> v3:
>>> - add test for replication changes
>>> - check if the filter to be inserted before/behind belongs to the
>>> same interface
>>> - fix the error message for the position= parameter
>>> - rename term "after" -> "behind" and variable "insert_before" ->
>> "insert_before_flag"
>>> - document the quorum node on the secondary side
>>> - simplify quorum parameters in documentation
>>> - remove trailing spaces in documentation
>>> - clarify the testing procedure in documentation
>>>
>>> v2:
>>> - fix email formating
>>> - fix checkpatch.pl warnings
>>> - fix patchew error
>>> - clearer commit messages
>>>
>>>
>>> Lukas Straub (4):
>>> block/replication.c: Ignore requests after failover
>>> tests/test-replication.c: Add test for for secondary node continuing
>>> replication
>>> net/filter.c: Add Options to insert filters anywhere in the filter
>>> list
>>> colo: Update Documentation for continuous replication
>>>
>>> block/replication.c | 35 +++++-
>>> docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++----------
>>> docs/block-replication.txt | 28 +++--
>>> include/net/filter.h | 2 +
>>> net/filter.c | 92 ++++++++++++++-
>>> qemu-options.hx | 31 ++++-
>>> tests/test-replication.c | 52 +++++++++
>>> 7 files changed, 389 insertions(+), 75 deletions(-)
>>>
>> Hello Everyone,
>> So I guess this is ready for merging or will that have to wait until the 4.2
>> release is done?
> Due to Qemu 4.2 release schedule, after soft feature freeze(Oct29) the master branch does not accept feature changes.
> But I don't know if sub-maintainer(block or net) can queue this series first then merge it after 4.2 release?
>
> Thanks
> Zhang Chen
Will try to queue this series.
Thanks
>
>> Regards,
>> Lukas Straub
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v7 0/4] colo: Add support for continuous replication
2019-11-19 15:03 ` Jason Wang
@ 2019-11-20 1:31 ` Zhang, Chen
2020-02-20 1:38 ` Zhang, Chen
0 siblings, 1 reply; 8+ messages in thread
From: Zhang, Chen @ 2019-11-20 1:31 UTC (permalink / raw)
To: Jason Wang, Lukas Straub, qemu-devel
Cc: Kevin Wolf, Wen Congyang, Xie Changlong, qemu-block, Max Reitz
> -----Original Message-----
> From: Jason Wang <jasowang@redhat.com>
> Sent: Tuesday, November 19, 2019 11:03 PM
> To: Zhang, Chen <chen.zhang@intel.com>; Lukas Straub
> <lukasstraub2@web.de>; qemu-devel <qemu-devel@nongnu.org>
> Cc: Kevin Wolf <kwolf@redhat.com>; qemu-block <qemu-
> block@nongnu.org>; Wen Congyang <wencongyang2@huawei.com>; Max
> Reitz <mreitz@redhat.com>; Xie Changlong <xiechanglong.d@gmail.com>
> Subject: Re: [PATCH v7 0/4] colo: Add support for continuous replication
>
>
> On 2019/11/19 下午8:28, Zhang, Chen wrote:
> >
> >> -----Original Message-----
> >> From: Lukas Straub <lukasstraub2@web.de>
> >> Sent: Thursday, November 14, 2019 12:36 AM
> >> To: qemu-devel <qemu-devel@nongnu.org>
> >> Cc: Zhang, Chen <chen.zhang@intel.com>; Jason Wang
> >> <jasowang@redhat.com>; Wen Congyang
> <wencongyang2@huawei.com>; Xie
> >> Changlong <xiechanglong.d@gmail.com>; Kevin Wolf
> <kwolf@redhat.com>;
> >> Max Reitz <mreitz@redhat.com>; qemu-block <qemu-block@nongnu.org>
> >> Subject: Re: [PATCH v7 0/4] colo: Add support for continuous
> >> replication
> >>
> >> On Fri, 25 Oct 2019 19:06:31 +0200
> >> Lukas Straub <lukasstraub2@web.de> wrote:
> >>
> >>> Hello Everyone,
> >>> These Patches add support for continuous replication to colo. This
> >>> means that after the Primary fails and the Secondary did a failover,
> >>> the Secondary can then become Primary and resume replication to a
> >>> new
> >> Secondary.
> >>> Regards,
> >>> Lukas Straub
> >>>
> >>> v7:
> >>> - clarify meaning of ip's in documentation and note that active and
> hidden
> >>> images just need to be created once
> >>> - reverted removal of bdrv_is_root_node(top_bs) in replication and
> >> adjusted
> >>> the top-id= parameter in documentation acordingly
> >>>
> >>> v6:
> >>> - documented the position= and insert= options
> >>> - renamed replication test
> >>> - clarified documentation by using different ip's for primary and
> >>> secondary
> >>> - added Reviewed-by tags
> >>>
> >>> v5:
> >>> - change syntax for the position= parameter
> >>> - fix spelling mistake
> >>>
> >>> v4:
> >>> - fix checkpatch.pl warnings
> >>>
> >>> v3:
> >>> - add test for replication changes
> >>> - check if the filter to be inserted before/behind belongs to the
> >>> same interface
> >>> - fix the error message for the position= parameter
> >>> - rename term "after" -> "behind" and variable "insert_before" ->
> >> "insert_before_flag"
> >>> - document the quorum node on the secondary side
> >>> - simplify quorum parameters in documentation
> >>> - remove trailing spaces in documentation
> >>> - clarify the testing procedure in documentation
> >>>
> >>> v2:
> >>> - fix email formating
> >>> - fix checkpatch.pl warnings
> >>> - fix patchew error
> >>> - clearer commit messages
> >>>
> >>>
> >>> Lukas Straub (4):
> >>> block/replication.c: Ignore requests after failover
> >>> tests/test-replication.c: Add test for for secondary node continuing
> >>> replication
> >>> net/filter.c: Add Options to insert filters anywhere in the filter
> >>> list
> >>> colo: Update Documentation for continuous replication
> >>>
> >>> block/replication.c | 35 +++++-
> >>> docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++---------
> -
> >>> docs/block-replication.txt | 28 +++--
> >>> include/net/filter.h | 2 +
> >>> net/filter.c | 92 ++++++++++++++-
> >>> qemu-options.hx | 31 ++++-
> >>> tests/test-replication.c | 52 +++++++++
> >>> 7 files changed, 389 insertions(+), 75 deletions(-)
> >>>
> >> Hello Everyone,
> >> So I guess this is ready for merging or will that have to wait until
> >> the 4.2 release is done?
> > Due to Qemu 4.2 release schedule, after soft feature freeze(Oct29) the
> master branch does not accept feature changes.
> > But I don't know if sub-maintainer(block or net) can queue this series first
> then merge it after 4.2 release?
> >
> > Thanks
> > Zhang Chen
>
>
> Will try to queue this series.
Thank you Jason~
Thanks
Zhang Chen
>
> Thanks
>
>
> >
> >> Regards,
> >> Lukas Straub
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 0/4] colo: Add support for continuous replication
2019-11-20 1:31 ` Zhang, Chen
@ 2020-02-20 1:38 ` Zhang, Chen
2020-02-20 6:52 ` Jason Wang
0 siblings, 1 reply; 8+ messages in thread
From: Zhang, Chen @ 2020-02-20 1:38 UTC (permalink / raw)
To: Jason Wang, Lukas Straub, qemu-devel
Cc: Kevin Wolf, Wen Congyang, Xie Changlong, qemu-block, Max Reitz
Hi Jason,
I noticed this series can't be merged or queued, do you met some problem
about it?
Thanks
Zhang Chen
>>>> Max Reitz <mreitz@redhat.com>; qemu-block <qemu-block@nongnu.org>
>>>> Subject: Re: [PATCH v7 0/4] colo: Add support for continuous
>>>> replication
>>>>
>>>> On Fri, 25 Oct 2019 19:06:31 +0200
>>>> Lukas Straub <lukasstraub2@web.de> wrote:
>>>>
>>>>> Hello Everyone,
>>>>> These Patches add support for continuous replication to colo. This
>>>>> means that after the Primary fails and the Secondary did a failover,
>>>>> the Secondary can then become Primary and resume replication to a
>>>>> new
>>>> Secondary.
>>>>> Regards,
>>>>> Lukas Straub
>>>>>
>>>>> v7:
>>>>> - clarify meaning of ip's in documentation and note that active and
>> hidden
>>>>> images just need to be created once
>>>>> - reverted removal of bdrv_is_root_node(top_bs) in replication and
>>>> adjusted
>>>>> the top-id= parameter in documentation acordingly
>>>>>
>>>>> v6:
>>>>> - documented the position= and insert= options
>>>>> - renamed replication test
>>>>> - clarified documentation by using different ip's for primary and
>>>>> secondary
>>>>> - added Reviewed-by tags
>>>>>
>>>>> v5:
>>>>> - change syntax for the position= parameter
>>>>> - fix spelling mistake
>>>>>
>>>>> v4:
>>>>> - fix checkpatch.pl warnings
>>>>>
>>>>> v3:
>>>>> - add test for replication changes
>>>>> - check if the filter to be inserted before/behind belongs to the
>>>>> same interface
>>>>> - fix the error message for the position= parameter
>>>>> - rename term "after" -> "behind" and variable "insert_before" ->
>>>> "insert_before_flag"
>>>>> - document the quorum node on the secondary side
>>>>> - simplify quorum parameters in documentation
>>>>> - remove trailing spaces in documentation
>>>>> - clarify the testing procedure in documentation
>>>>>
>>>>> v2:
>>>>> - fix email formating
>>>>> - fix checkpatch.pl warnings
>>>>> - fix patchew error
>>>>> - clearer commit messages
>>>>>
>>>>>
>>>>> Lukas Straub (4):
>>>>> block/replication.c: Ignore requests after failover
>>>>> tests/test-replication.c: Add test for for secondary node continuing
>>>>> replication
>>>>> net/filter.c: Add Options to insert filters anywhere in the filter
>>>>> list
>>>>> colo: Update Documentation for continuous replication
>>>>>
>>>>> block/replication.c | 35 +++++-
>>>>> docs/COLO-FT.txt | 224 +++++++++++++++++++++++++++---------
>> -
>>>>> docs/block-replication.txt | 28 +++--
>>>>> include/net/filter.h | 2 +
>>>>> net/filter.c | 92 ++++++++++++++-
>>>>> qemu-options.hx | 31 ++++-
>>>>> tests/test-replication.c | 52 +++++++++
>>>>> 7 files changed, 389 insertions(+), 75 deletions(-)
>>>>>
>>>> Hello Everyone,
>>>> So I guess this is ready for merging or will that have to wait until
>>>> the 4.2 release is done?
>>> Due to Qemu 4.2 release schedule, after soft feature freeze(Oct29) the
>> master branch does not accept feature changes.
>>> But I don't know if sub-maintainer(block or net) can queue this series first
>> then merge it after 4.2 release?
>>> Thanks
>>> Zhang Chen
>>
>> Will try to queue this series.
> Thank you Jason~
>
> Thanks
> Zhang Chen
>
>> Thanks
>>
>>
>>>> Regards,
>>>> Lukas Straub
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 0/4] colo: Add support for continuous replication
2020-02-20 1:38 ` Zhang, Chen
@ 2020-02-20 6:52 ` Jason Wang
0 siblings, 0 replies; 8+ messages in thread
From: Jason Wang @ 2020-02-20 6:52 UTC (permalink / raw)
To: Zhang, Chen, Lukas Straub, qemu-devel
Cc: Kevin Wolf, Wen Congyang, Xie Changlong, qemu-block, Max Reitz
On 2020/2/20 上午9:38, Zhang, Chen wrote:
> Hi Jason,
>
> I noticed this series can't be merged or queued, do you met some
> problem about it?
>
>
> Thanks
>
> Zhang Chen
Not, I've queued this.
Thanks
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-02-20 6:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-25 17:04 [PATCH v7 0/4] colo: Add support for continuous replication Lukas Straub
2019-10-25 17:06 Lukas Straub
2019-11-13 16:35 ` Lukas Straub
2019-11-19 12:28 ` Zhang, Chen
2019-11-19 15:03 ` Jason Wang
2019-11-20 1:31 ` Zhang, Chen
2020-02-20 1:38 ` Zhang, Chen
2020-02-20 6:52 ` Jason Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).