* [PULL 2/4] tests: benchmark crypto with fixed data size, not time period
2019-10-28 15:49 [PULL 0/4] Crypto luks patches Daniel P. Berrangé
2019-10-28 15:49 ` [PULL 1/4] tests: allow filtering crypto cipher benchmark tests Daniel P. Berrangé
@ 2019-10-28 15:49 ` Daniel P. Berrangé
2019-10-28 15:49 ` [PULL 3/4] crypto: add support for gcrypt's native XTS impl Daniel P. Berrangé
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Daniel P. Berrangé @ 2019-10-28 15:49 UTC (permalink / raw)
To: qemu-devel
Cc: Philippe Mathieu-Daudé, Daniel P. Berrangé, Stefano Garzarella
Currently the crypto benchmarks are processing data in varying chunk
sizes, over a fixed time period. This turns out to be a terrible idea
because with small chunk sizes the overhead of checking the elapsed
time on each loop iteration masks the true performance.
Benchmarking over a fixed data size avoids the loop running any system
calls which can interfere with the performance measurements.
Before this change
Enc chunk 512 bytes 2283.47 MB/sec Dec chunk 512 bytes 2236.23 MB/sec OK
Enc chunk 4096 bytes 2744.97 MB/sec Dec chunk 4096 bytes 2614.71 MB/sec OK
Enc chunk 16384 bytes 2777.53 MB/sec Dec chunk 16384 bytes 2678.44 MB/sec OK
Enc chunk 65536 bytes 2809.34 MB/sec Dec chunk 65536 bytes 2699.47 MB/sec OK
After this change
Enc chunk 512 bytes 2058.22 MB/sec Dec chunk 512 bytes 2030.11 MB/sec OK
Enc chunk 4096 bytes 2699.27 MB/sec Dec chunk 4096 bytes 2573.78 MB/sec OK
Enc chunk 16384 bytes 2748.52 MB/sec Dec chunk 16384 bytes 2653.76 MB/sec OK
Enc chunk 65536 bytes 2814.08 MB/sec Dec chunk 65536 bytes 2712.74 MB/sec OK
The actual crypto performance hasn't changed, which shows how
significant the mis-measurement has been for small data sizes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
tests/benchmark-crypto-cipher.c | 26 ++++++++++++++------------
tests/benchmark-crypto-hash.c | 17 +++++++++--------
2 files changed, 23 insertions(+), 20 deletions(-)
diff --git a/tests/benchmark-crypto-cipher.c b/tests/benchmark-crypto-cipher.c
index 3ca31a2779..53032334ec 100644
--- a/tests/benchmark-crypto-cipher.c
+++ b/tests/benchmark-crypto-cipher.c
@@ -21,11 +21,12 @@ static void test_cipher_speed(size_t chunk_size,
{
QCryptoCipher *cipher;
Error *err = NULL;
- double total = 0.0;
uint8_t *key = NULL, *iv = NULL;
uint8_t *plaintext = NULL, *ciphertext = NULL;
size_t nkey;
size_t niv;
+ const size_t total = 2 * GiB;
+ size_t remain;
if (!qcrypto_cipher_supports(alg, mode)) {
return;
@@ -58,33 +59,34 @@ static void test_cipher_speed(size_t chunk_size,
&err) == 0);
g_test_timer_start();
- do {
+ remain = total;
+ while (remain) {
g_assert(qcrypto_cipher_encrypt(cipher,
plaintext,
ciphertext,
chunk_size,
&err) == 0);
- total += chunk_size;
- } while (g_test_timer_elapsed() < 1.0);
+ remain -= chunk_size;
+ }
+ g_test_timer_elapsed();
- total /= MiB;
g_print("Enc chunk %zu bytes ", chunk_size);
- g_print("%.2f MB/sec ", total / g_test_timer_last());
+ g_print("%.2f MB/sec ", (double)total / MiB / g_test_timer_last());
- total = 0.0;
g_test_timer_start();
- do {
+ remain = total;
+ while (remain) {
g_assert(qcrypto_cipher_decrypt(cipher,
plaintext,
ciphertext,
chunk_size,
&err) == 0);
- total += chunk_size;
- } while (g_test_timer_elapsed() < 1.0);
+ remain -= chunk_size;
+ }
+ g_test_timer_elapsed();
- total /= MiB;
g_print("Dec chunk %zu bytes ", chunk_size);
- g_print("%.2f MB/sec ", total / g_test_timer_last());
+ g_print("%.2f MB/sec ", (double)total / MiB / g_test_timer_last());
qcrypto_cipher_free(cipher);
g_free(plaintext);
diff --git a/tests/benchmark-crypto-hash.c b/tests/benchmark-crypto-hash.c
index 9b6f7a9155..7f659f7323 100644
--- a/tests/benchmark-crypto-hash.c
+++ b/tests/benchmark-crypto-hash.c
@@ -20,7 +20,8 @@ static void test_hash_speed(const void *opaque)
size_t chunk_size = (size_t)opaque;
uint8_t *in = NULL, *out = NULL;
size_t out_len = 0;
- double total = 0.0;
+ const size_t total = 2 * GiB;
+ size_t remain;
struct iovec iov;
int ret;
@@ -31,20 +32,20 @@ static void test_hash_speed(const void *opaque)
iov.iov_len = chunk_size;
g_test_timer_start();
- do {
+ remain = total;
+ while (remain) {
ret = qcrypto_hash_bytesv(QCRYPTO_HASH_ALG_SHA256,
&iov, 1, &out, &out_len,
NULL);
g_assert(ret == 0);
- total += chunk_size;
- } while (g_test_timer_elapsed() < 5.0);
+ remain -= chunk_size;
+ }
+ g_test_timer_elapsed();
- total /= MiB;
g_print("sha256: ");
- g_print("Testing chunk_size %zu bytes ", chunk_size);
- g_print("done: %.2f MB in %.2f secs: ", total, g_test_timer_last());
- g_print("%.2f MB/sec\n", total / g_test_timer_last());
+ g_print("Hash %zu GB chunk size %zu bytes ", total / GiB, chunk_size);
+ g_print("%.2f MB/sec ", (double)total / MiB / g_test_timer_last());
g_free(out);
g_free(in);
--
2.23.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PULL 3/4] crypto: add support for gcrypt's native XTS impl
2019-10-28 15:49 [PULL 0/4] Crypto luks patches Daniel P. Berrangé
2019-10-28 15:49 ` [PULL 1/4] tests: allow filtering crypto cipher benchmark tests Daniel P. Berrangé
2019-10-28 15:49 ` [PULL 2/4] tests: benchmark crypto with fixed data size, not time period Daniel P. Berrangé
@ 2019-10-28 15:49 ` Daniel P. Berrangé
2019-10-28 15:49 ` [PULL 4/4] crypto: add support for nettle's " Daniel P. Berrangé
2019-10-29 16:26 ` [PULL 0/4] Crypto luks patches Peter Maydell
4 siblings, 0 replies; 7+ messages in thread
From: Daniel P. Berrangé @ 2019-10-28 15:49 UTC (permalink / raw)
To: qemu-devel
Cc: Philippe Mathieu-Daudé, Daniel P. Berrangé, Stefano Garzarella
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
configure | 22 ++++++++++
crypto/Makefile.objs | 2 +-
crypto/cipher-gcrypt.c | 97 ++++++++++++++++++++++++++++--------------
tests/Makefile.include | 2 +-
4 files changed, 88 insertions(+), 35 deletions(-)
diff --git a/configure b/configure
index 145fcabbb3..d1e9e457ce 100755
--- a/configure
+++ b/configure
@@ -474,6 +474,8 @@ gnutls=""
nettle=""
gcrypt=""
gcrypt_hmac="no"
+gcrypt_xts="no"
+qemu_private_xts="yes"
auth_pam=""
vte=""
virglrenderer=""
@@ -2911,6 +2913,18 @@ EOF
if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
gcrypt_hmac=yes
fi
+ cat > $TMPC << EOF
+#include <gcrypt.h>
+int main(void) {
+ gcry_cipher_hd_t handle;
+ gcry_cipher_open(&handle, GCRY_CIPHER_AES, GCRY_CIPHER_MODE_XTS, 0);
+ return 0;
+}
+EOF
+ if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
+ gcrypt_xts=yes
+ qemu_private_xts=no
+ fi
elif test "$gcrypt" = "yes"; then
feature_not_found "gcrypt" "Install gcrypt devel >= 1.5.0"
else
@@ -6326,6 +6340,11 @@ echo "VTE support $vte $(echo_version $vte $vteversion)"
echo "TLS priority $tls_priority"
echo "GNUTLS support $gnutls"
echo "libgcrypt $gcrypt"
+if test "$gcrypt" = "yes"
+then
+ echo " hmac $gcrypt_hmac"
+ echo " XTS $gcrypt_xts"
+fi
echo "nettle $nettle $(echo_version $nettle $nettle_version)"
echo "libtasn1 $tasn1"
echo "PAM $auth_pam"
@@ -6804,6 +6823,9 @@ if test "$nettle" = "yes" ; then
echo "CONFIG_NETTLE=y" >> $config_host_mak
echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
fi
+if test "$qemu_private_xts" = "yes" ; then
+ echo "CONFIG_QEMU_PRIVATE_XTS=y" >> $config_host_mak
+fi
if test "$tasn1" = "yes" ; then
echo "CONFIG_TASN1=y" >> $config_host_mak
fi
diff --git a/crypto/Makefile.objs b/crypto/Makefile.objs
index 7fe2fa9da2..cdb01f9de9 100644
--- a/crypto/Makefile.objs
+++ b/crypto/Makefile.objs
@@ -31,7 +31,7 @@ crypto-obj-y += ivgen-essiv.o
crypto-obj-y += ivgen-plain.o
crypto-obj-y += ivgen-plain64.o
crypto-obj-y += afsplit.o
-crypto-obj-y += xts.o
+crypto-obj-$(CONFIG_QEMU_PRIVATE_XTS) += xts.o
crypto-obj-y += block.o
crypto-obj-y += block-qcow.o
crypto-obj-y += block-luks.o
diff --git a/crypto/cipher-gcrypt.c b/crypto/cipher-gcrypt.c
index 5cece9b244..2864099527 100644
--- a/crypto/cipher-gcrypt.c
+++ b/crypto/cipher-gcrypt.c
@@ -19,7 +19,9 @@
*/
#include "qemu/osdep.h"
+#ifdef CONFIG_QEMU_PRIVATE_XTS
#include "crypto/xts.h"
+#endif
#include "cipherpriv.h"
#include <gcrypt.h>
@@ -59,10 +61,12 @@ bool qcrypto_cipher_supports(QCryptoCipherAlgorithm alg,
typedef struct QCryptoCipherGcrypt QCryptoCipherGcrypt;
struct QCryptoCipherGcrypt {
gcry_cipher_hd_t handle;
- gcry_cipher_hd_t tweakhandle;
size_t blocksize;
+#ifdef CONFIG_QEMU_PRIVATE_XTS
+ gcry_cipher_hd_t tweakhandle;
/* Initialization vector or Counter */
uint8_t *iv;
+#endif
};
static void
@@ -74,10 +78,12 @@ qcrypto_gcrypt_cipher_free_ctx(QCryptoCipherGcrypt *ctx,
}
gcry_cipher_close(ctx->handle);
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
gcry_cipher_close(ctx->tweakhandle);
}
g_free(ctx->iv);
+#endif
g_free(ctx);
}
@@ -94,8 +100,14 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
switch (mode) {
case QCRYPTO_CIPHER_MODE_ECB:
+ gcrymode = GCRY_CIPHER_MODE_ECB;
+ break;
case QCRYPTO_CIPHER_MODE_XTS:
+#ifdef CONFIG_QEMU_PRIVATE_XTS
gcrymode = GCRY_CIPHER_MODE_ECB;
+#else
+ gcrymode = GCRY_CIPHER_MODE_XTS;
+#endif
break;
case QCRYPTO_CIPHER_MODE_CBC:
gcrymode = GCRY_CIPHER_MODE_CBC;
@@ -172,6 +184,7 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
gcry_strerror(err));
goto error;
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
err = gcry_cipher_open(&ctx->tweakhandle, gcryalg, gcrymode, 0);
if (err != 0) {
@@ -180,6 +193,7 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
goto error;
}
}
+#endif
if (alg == QCRYPTO_CIPHER_ALG_DES_RFB) {
/* We're using standard DES cipher from gcrypt, so we need
@@ -191,6 +205,7 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
g_free(rfbkey);
ctx->blocksize = 8;
} else {
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
nkey /= 2;
err = gcry_cipher_setkey(ctx->handle, key, nkey);
@@ -201,8 +216,11 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
}
err = gcry_cipher_setkey(ctx->tweakhandle, key + nkey, nkey);
} else {
+#endif
err = gcry_cipher_setkey(ctx->handle, key, nkey);
+#ifdef CONFIG_QEMU_PRIVATE_XTS
}
+#endif
if (err != 0) {
error_setg(errp, "Cannot set key: %s",
gcry_strerror(err));
@@ -228,6 +246,7 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
}
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (mode == QCRYPTO_CIPHER_MODE_XTS) {
if (ctx->blocksize != XTS_BLOCK_SIZE) {
error_setg(errp,
@@ -237,6 +256,7 @@ static QCryptoCipherGcrypt *qcrypto_cipher_ctx_new(QCryptoCipherAlgorithm alg,
}
ctx->iv = g_new0(uint8_t, ctx->blocksize);
}
+#endif
return ctx;
@@ -253,6 +273,7 @@ qcrypto_gcrypt_cipher_ctx_free(QCryptoCipher *cipher)
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
static void qcrypto_gcrypt_xts_encrypt(const void *ctx,
size_t length,
uint8_t *dst,
@@ -272,6 +293,7 @@ static void qcrypto_gcrypt_xts_decrypt(const void *ctx,
err = gcry_cipher_decrypt((gcry_cipher_hd_t)ctx, dst, length, src, length);
g_assert(err == 0);
}
+#endif
static int
qcrypto_gcrypt_cipher_encrypt(QCryptoCipher *cipher,
@@ -289,20 +311,23 @@ qcrypto_gcrypt_cipher_encrypt(QCryptoCipher *cipher,
return -1;
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (cipher->mode == QCRYPTO_CIPHER_MODE_XTS) {
xts_encrypt(ctx->handle, ctx->tweakhandle,
qcrypto_gcrypt_xts_encrypt,
qcrypto_gcrypt_xts_decrypt,
ctx->iv, len, out, in);
- } else {
- err = gcry_cipher_encrypt(ctx->handle,
- out, len,
- in, len);
- if (err != 0) {
- error_setg(errp, "Cannot encrypt data: %s",
- gcry_strerror(err));
- return -1;
- }
+ return 0;
+ }
+#endif
+
+ err = gcry_cipher_encrypt(ctx->handle,
+ out, len,
+ in, len);
+ if (err != 0) {
+ error_setg(errp, "Cannot encrypt data: %s",
+ gcry_strerror(err));
+ return -1;
}
return 0;
@@ -325,20 +350,23 @@ qcrypto_gcrypt_cipher_decrypt(QCryptoCipher *cipher,
return -1;
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (cipher->mode == QCRYPTO_CIPHER_MODE_XTS) {
xts_decrypt(ctx->handle, ctx->tweakhandle,
qcrypto_gcrypt_xts_encrypt,
qcrypto_gcrypt_xts_decrypt,
ctx->iv, len, out, in);
- } else {
- err = gcry_cipher_decrypt(ctx->handle,
- out, len,
- in, len);
- if (err != 0) {
- error_setg(errp, "Cannot decrypt data: %s",
- gcry_strerror(err));
- return -1;
- }
+ return 0;
+ }
+#endif
+
+ err = gcry_cipher_decrypt(ctx->handle,
+ out, len,
+ in, len);
+ if (err != 0) {
+ error_setg(errp, "Cannot decrypt data: %s",
+ gcry_strerror(err));
+ return -1;
}
return 0;
@@ -358,24 +386,27 @@ qcrypto_gcrypt_cipher_setiv(QCryptoCipher *cipher,
return -1;
}
+#ifdef CONFIG_QEMU_PRIVATE_XTS
if (ctx->iv) {
memcpy(ctx->iv, iv, niv);
- } else {
- if (cipher->mode == QCRYPTO_CIPHER_MODE_CTR) {
- err = gcry_cipher_setctr(ctx->handle, iv, niv);
- if (err != 0) {
- error_setg(errp, "Cannot set Counter: %s",
+ return 0;
+ }
+#endif
+
+ if (cipher->mode == QCRYPTO_CIPHER_MODE_CTR) {
+ err = gcry_cipher_setctr(ctx->handle, iv, niv);
+ if (err != 0) {
+ error_setg(errp, "Cannot set Counter: %s",
gcry_strerror(err));
- return -1;
- }
- } else {
- gcry_cipher_reset(ctx->handle);
- err = gcry_cipher_setiv(ctx->handle, iv, niv);
- if (err != 0) {
- error_setg(errp, "Cannot set IV: %s",
+ return -1;
+ }
+ } else {
+ gcry_cipher_reset(ctx->handle);
+ err = gcry_cipher_setiv(ctx->handle, iv, niv);
+ if (err != 0) {
+ error_setg(errp, "Cannot set IV: %s",
gcry_strerror(err));
- return -1;
- }
+ return -1;
}
}
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 09e5b410dc..4efdd0cd6e 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -140,7 +140,7 @@ check-unit-y += tests/test-base64$(EXESUF)
check-unit-$(call land,$(CONFIG_BLOCK),$(if $(CONFIG_NETTLE),y,$(CONFIG_GCRYPT))) += tests/test-crypto-pbkdf$(EXESUF)
check-unit-$(CONFIG_BLOCK) += tests/test-crypto-ivgen$(EXESUF)
check-unit-$(CONFIG_BLOCK) += tests/test-crypto-afsplit$(EXESUF)
-check-unit-$(CONFIG_BLOCK) += tests/test-crypto-xts$(EXESUF)
+check-unit-$(if $(CONFIG_BLOCK),$(CONFIG_QEMU_PRIVATE_XTS)) += tests/test-crypto-xts$(EXESUF)
check-unit-$(CONFIG_BLOCK) += tests/test-crypto-block$(EXESUF)
check-unit-y += tests/test-logging$(EXESUF)
check-unit-$(call land,$(CONFIG_BLOCK),$(CONFIG_REPLICATION)) += tests/test-replication$(EXESUF)
--
2.23.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PULL 4/4] crypto: add support for nettle's native XTS impl
2019-10-28 15:49 [PULL 0/4] Crypto luks patches Daniel P. Berrangé
` (2 preceding siblings ...)
2019-10-28 15:49 ` [PULL 3/4] crypto: add support for gcrypt's native XTS impl Daniel P. Berrangé
@ 2019-10-28 15:49 ` Daniel P. Berrangé
2019-10-30 14:21 ` Alex Bennée
2019-10-29 16:26 ` [PULL 0/4] Crypto luks patches Peter Maydell
4 siblings, 1 reply; 7+ messages in thread
From: Daniel P. Berrangé @ 2019-10-28 15:49 UTC (permalink / raw)
To: qemu-devel
Cc: Philippe Mathieu-Daudé, Daniel P. Berrangé, Stefano Garzarella
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
configure | 18 ++++++++++++++++++
crypto/cipher-nettle.c | 18 ++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/configure b/configure
index d1e9e457ce..452c2dfe4e 100755
--- a/configure
+++ b/configure
@@ -472,6 +472,7 @@ gtk_gl="no"
tls_priority="NORMAL"
gnutls=""
nettle=""
+nettle_xts="no"
gcrypt=""
gcrypt_hmac="no"
gcrypt_xts="no"
@@ -2871,6 +2872,19 @@ if test "$nettle" != "no"; then
pass="yes"
fi
fi
+ if test "$pass" = "yes"
+ then
+ cat > $TMPC << EOF
+#include <nettle/xts.h>
+int main(void) {
+ return 0;
+}
+EOF
+ if compile_prog "$nettle_cflags" "$nettle_libs" ; then
+ nettle_xts=yes
+ qemu_private_xts=no
+ fi
+ fi
if test "$pass" = "no" && test "$nettle" = "yes"; then
feature_not_found "nettle" "Install nettle devel >= 2.7.1"
else
@@ -6346,6 +6360,10 @@ then
echo " XTS $gcrypt_xts"
fi
echo "nettle $nettle $(echo_version $nettle $nettle_version)"
+if test "$nettle" = "yes"
+then
+ echo " XTS $nettle_xts"
+fi
echo "libtasn1 $tasn1"
echo "PAM $auth_pam"
echo "iconv support $iconv"
diff --git a/crypto/cipher-nettle.c b/crypto/cipher-nettle.c
index d7411bb8ff..7e9a4cc199 100644
--- a/crypto/cipher-nettle.c
+++ b/crypto/cipher-nettle.c
@@ -19,7 +19,9 @@
*/
#include "qemu/osdep.h"
+#ifdef CONFIG_QEMU_PRIVATE_XTS
#include "crypto/xts.h"
+#endif
#include "cipherpriv.h"
#include <nettle/nettle-types.h>
@@ -30,6 +32,9 @@
#include <nettle/serpent.h>
#include <nettle/twofish.h>
#include <nettle/ctr.h>
+#ifndef CONFIG_QEMU_PRIVATE_XTS
+#include <nettle/xts.h>
+#endif
typedef void (*QCryptoCipherNettleFuncWrapper)(const void *ctx,
size_t length,
@@ -626,9 +631,15 @@ qcrypto_nettle_cipher_encrypt(QCryptoCipher *cipher,
break;
case QCRYPTO_CIPHER_MODE_XTS:
+#ifdef CONFIG_QEMU_PRIVATE_XTS
xts_encrypt(ctx->ctx, ctx->ctx_tweak,
ctx->alg_encrypt_wrapper, ctx->alg_encrypt_wrapper,
ctx->iv, len, out, in);
+#else
+ xts_encrypt_message(ctx->ctx, ctx->ctx_tweak,
+ ctx->alg_encrypt_native,
+ ctx->iv, len, out, in);
+#endif
break;
case QCRYPTO_CIPHER_MODE_CTR:
@@ -673,9 +684,16 @@ qcrypto_nettle_cipher_decrypt(QCryptoCipher *cipher,
break;
case QCRYPTO_CIPHER_MODE_XTS:
+#ifdef CONFIG_QEMU_PRIVATE_XTS
xts_decrypt(ctx->ctx, ctx->ctx_tweak,
ctx->alg_encrypt_wrapper, ctx->alg_decrypt_wrapper,
ctx->iv, len, out, in);
+#else
+ xts_decrypt_message(ctx->ctx, ctx->ctx_tweak,
+ ctx->alg_decrypt_native,
+ ctx->alg_encrypt_native,
+ ctx->iv, len, out, in);
+#endif
break;
case QCRYPTO_CIPHER_MODE_CTR:
ctr_crypt(ctx->ctx, ctx->alg_encrypt_native,
--
2.23.0
^ permalink raw reply related [flat|nested] 7+ messages in thread