From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Laurent Vivier" <lvivier@redhat.com>,
"Thomas Huth" <thuth@redhat.com>,
"Daniel P. Berrangé" <berrange@redhat.com>,
"Eduardo Habkost" <ehabkost@redhat.com>,
"Juan Quintela" <quintela@redhat.com>,
"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
"Markus Armbruster" <armbru@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>
Subject: [PATCH v5 7/8] multifd: Add multifd-zstd-level parameter
Date: Wed, 29 Jan 2020 12:56:54 +0100 [thread overview]
Message-ID: <20200129115655.10414-8-quintela@redhat.com> (raw)
In-Reply-To: <20200129115655.10414-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
migration/migration.c | 15 +++++++++++++++
monitor/hmp-cmds.c | 4 ++++
qapi/migration.json | 29 ++++++++++++++++++++++++++---
3 files changed, 45 insertions(+), 3 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 3b081e8147..b690500545 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -91,6 +91,8 @@
#define DEFAULT_MIGRATE_MULTIFD_METHOD MULTIFD_METHOD_NONE
/*0: means nocompress, 1: best speed, ... 9: best compress ratio */
#define DEFAULT_MIGRATE_MULTIFD_ZLIB_LEVEL 1
+/* 0: means nocompress, 1: best speed, ... 20: best compress ratio */
+#define DEFAULT_MIGRATE_MULTIFD_ZSTD_LEVEL 1
/* Background transfer rate for postcopy, 0 means unlimited, note
* that page requests can still exceed this limit.
@@ -805,6 +807,8 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
params->multifd_method = s->parameters.multifd_method;
params->has_multifd_zlib_level = true;
params->multifd_zlib_level = s->parameters.multifd_zlib_level;
+ params->has_multifd_zstd_level = true;
+ params->multifd_zstd_level = s->parameters.multifd_zstd_level;
params->has_xbzrle_cache_size = true;
params->xbzrle_cache_size = s->parameters.xbzrle_cache_size;
params->has_max_postcopy_bandwidth = true;
@@ -1219,6 +1223,13 @@ static bool migrate_params_check(MigrationParameters *params, Error **errp)
return false;
}
+ if (params->has_multifd_zstd_level &&
+ (params->multifd_zstd_level > 20)) {
+ error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "multifd_zstd_level",
+ "is invalid, it should be in the range of 0 to 20");
+ return false;
+ }
+
if (params->has_xbzrle_cache_size &&
(params->xbzrle_cache_size < qemu_target_page_size() ||
!is_power_of_2(params->xbzrle_cache_size))) {
@@ -3559,6 +3570,9 @@ static Property migration_properties[] = {
DEFINE_PROP_UINT8("multifd-zlib-level", MigrationState,
parameters.multifd_zlib_level,
DEFAULT_MIGRATE_MULTIFD_ZLIB_LEVEL),
+ DEFINE_PROP_UINT8("multifd-zstd-level", MigrationState,
+ parameters.multifd_zstd_level,
+ DEFAULT_MIGRATE_MULTIFD_ZSTD_LEVEL),
DEFINE_PROP_SIZE("xbzrle-cache-size", MigrationState,
parameters.xbzrle_cache_size,
DEFAULT_MIGRATE_XBZRLE_CACHE_SIZE),
@@ -3651,6 +3665,7 @@ static void migration_instance_init(Object *obj)
params->has_multifd_channels = true;
params->has_multifd_method = true;
params->has_multifd_zlib_level = true;
+ params->has_multifd_zstd_level = true;
params->has_xbzrle_cache_size = true;
params->has_max_postcopy_bandwidth = true;
params->has_max_cpu_throttle = true;
diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
index 7f11866446..87db07694b 100644
--- a/monitor/hmp-cmds.c
+++ b/monitor/hmp-cmds.c
@@ -1840,6 +1840,10 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
p->has_multifd_zlib_level = true;
visit_type_int(v, param, &p->multifd_zlib_level, &err);
break;
+ case MIGRATION_PARAMETER_MULTIFD_ZSTD_LEVEL:
+ p->has_multifd_zstd_level = true;
+ visit_type_int(v, param, &p->multifd_zstd_level, &err);
+ break;
case MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE:
p->has_xbzrle_cache_size = true;
visit_type_size(v, param, &cache_size, &err);
diff --git a/qapi/migration.json b/qapi/migration.json
index 032ee7d3e6..bb5cb6b4f4 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -610,6 +610,13 @@
# will consume more CPU.
# Defaults to 1. (Since 5.0)
#
+# @multifd-zstd-level: Set the compression level to be used in live
+# migration, the compression level is an integer between 0
+# and 20, where 0 means no compression, 1 means the best
+# compression speed, and 20 means best compression ratio which
+# will consume more CPU.
+# Defaults to 1. (Since 5.0)
+#
# Since: 2.4
##
{ 'enum': 'MigrationParameter',
@@ -623,7 +630,7 @@
'multifd-channels',
'xbzrle-cache-size', 'max-postcopy-bandwidth',
'max-cpu-throttle', 'multifd-method',
- 'multifd-zlib-level' ] }
+ 'multifd-zlib-level' ,'multifd-zstd-level' ] }
##
# @MigrateSetParameters:
@@ -723,6 +730,13 @@
# will consume more CPU.
# Defaults to 1. (Since 5.0)
#
+# @multifd-zstd-level: Set the compression level to be used in live
+# migration, the compression level is an integer between 0
+# and 20, where 0 means no compression, 1 means the best
+# compression speed, and 20 means best compression ratio which
+# will consume more CPU.
+# Defaults to 1. (Since 5.0)
+#
# Since: 2.4
##
# TODO either fuse back into MigrationParameters, or make
@@ -750,7 +764,8 @@
'*max-postcopy-bandwidth': 'size',
'*max-cpu-throttle': 'int',
'*multifd-method': 'MultiFDMethod',
- '*multifd-zlib-level': 'int' } }
+ '*multifd-zlib-level': 'int',
+ '*multifd-zstd-level': 'int' } }
##
# @migrate-set-parameters:
@@ -870,6 +885,13 @@
# will consume more CPU.
# Defaults to 1. (Since 5.0)
#
+# @multifd-zstd-level: Set the compression level to be used in live
+# migration, the compression level is an integer between 0
+# and 20, where 0 means no compression, 1 means the best
+# compression speed, and 20 means best compression ratio which
+# will consume more CPU.
+# Defaults to 1. (Since 5.0)
+#
# Since: 2.4
##
{ 'struct': 'MigrationParameters',
@@ -895,7 +917,8 @@
'*max-postcopy-bandwidth': 'size',
'*max-cpu-throttle': 'uint8',
'*multifd-method': 'MultiFDMethod',
- '*multifd-zlib-level': 'uint8' } }
+ '*multifd-zlib-level': 'uint8',
+ '*multifd-zstd-level': 'uint8' } }
##
# @query-migrate-parameters:
--
2.24.1
next prev parent reply other threads:[~2020-01-29 12:00 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 11:56 [PATCH v5 0/8] Multifd Migration Compression Juan Quintela
2020-01-29 11:56 ` [PATCH v5 1/8] multifd: Add multifd-method parameter Juan Quintela
2020-01-30 7:54 ` Markus Armbruster
2020-01-30 9:11 ` Juan Quintela
2020-01-30 12:17 ` Markus Armbruster
2020-02-11 18:50 ` Daniel P. Berrangé
2020-02-13 19:29 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 2/8] migration: Add support for modules Juan Quintela
2020-02-11 10:54 ` Dr. David Alan Gilbert
2020-02-13 19:38 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 3/8] multifd: Make no compression operations into its own structure Juan Quintela
2020-02-07 18:45 ` Dr. David Alan Gilbert
2020-02-11 11:23 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 4/8] multifd: Add multifd-zlib-level parameter Juan Quintela
2020-01-30 8:03 ` Markus Armbruster
2020-01-30 8:56 ` Juan Quintela
2020-02-11 18:57 ` Daniel P. Berrangé
2020-02-13 13:27 ` Markus Armbruster
2020-02-13 16:33 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 5/8] multifd: Add zlib compression multifd support Juan Quintela
2020-01-30 8:04 ` Markus Armbruster
2020-02-11 18:43 ` Dr. David Alan Gilbert
2020-02-13 20:24 ` Juan Quintela
2020-01-29 11:56 ` [PATCH v5 6/8] configure: Enable test and libs for zstd Juan Quintela
2020-02-11 20:11 ` Daniel P. Berrangé
2020-02-13 21:08 ` Juan Quintela
2020-02-14 10:26 ` Daniel P. Berrangé
2020-01-29 11:56 ` Juan Quintela [this message]
2020-01-30 8:08 ` [PATCH v5 7/8] multifd: Add multifd-zstd-level parameter Markus Armbruster
2020-02-11 18:47 ` Dr. David Alan Gilbert
2020-02-13 14:04 ` Markus Armbruster
2020-02-13 14:28 ` Dr. David Alan Gilbert
2020-02-13 15:33 ` Juan Quintela
2020-02-14 8:49 ` Markus Armbruster
2020-02-14 18:50 ` Dr. David Alan Gilbert
2020-01-29 11:56 ` [PATCH v5 8/8] multifd: Add zstd compression multifd support Juan Quintela
2020-01-30 8:08 ` Markus Armbruster
2020-02-11 20:01 ` Dr. David Alan Gilbert
2020-02-13 20:39 ` Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200129115655.10414-8-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=armbru@redhat.com \
--cc=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=ehabkost@redhat.com \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).