qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: alex.bennee@linaro.org
Subject: [PATCH v3 15/25] Rearrange reginfo and memblock buffers
Date: Thu, 21 May 2020 19:34:30 -0700	[thread overview]
Message-ID: <20200522023440.26261-16-richard.henderson@linaro.org> (raw)
In-Reply-To: <20200522023440.26261-1-richard.henderson@linaro.org>

For send_register_info from master_sigill, do not keep a
reginfo buffer on the stack.  At the moment, this struct
is quite large for aarch64.

Put the two reginfo buffers into an array, for the benefit
of future dumping.  For recv_and_compare_register_info,
index this array with constants, so it's a simple rename.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 risu.c | 58 ++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 32 insertions(+), 26 deletions(-)

diff --git a/risu.c b/risu.c
index a0e20d5..b91ad38 100644
--- a/risu.c
+++ b/risu.c
@@ -28,10 +28,16 @@
 #include "config.h"
 #include "risu.h"
 
-static void *memblock;
-static struct reginfo master_ri, apprentice_ri;
-static uint8_t master_memblock[MEMBLOCKLEN];
+enum {
+    MASTER = 0, APPRENTICE = 1
+};
 
+static struct reginfo ri[2];
+static uint8_t other_memblock[MEMBLOCKLEN];
+static trace_header_t header;
+
+/* Memblock pointer into the execution image. */
+static void *memblock;
 
 static int comm_fd;
 static bool trace;
@@ -102,16 +108,15 @@ static void respond(RisuResult r)
 
 static RisuResult send_register_info(void *uc)
 {
-    struct reginfo ri;
-    trace_header_t header;
+    uint64_t paramreg;
     RisuResult res;
     RisuOp op;
 
-    reginfo_init(&ri, uc);
-    op = get_risuop(&ri);
+    reginfo_init(&ri[MASTER], uc);
+    op = get_risuop(&ri[MASTER]);
 
     /* Write a header with PC/op to keep in sync */
-    header.pc = get_pc(&ri);
+    header.pc = get_pc(&ri[MASTER]);
     header.risu_op = op;
     res = write_buffer(&header, sizeof(header));
     if (res != RES_OK) {
@@ -126,18 +131,19 @@ static RisuResult send_register_info(void *uc)
          * Do a simple register compare on (a) explicit request
          * (b) end of test (c) a non-risuop UNDEF
          */
-        res = write_buffer(&ri, reginfo_size());
+        res = write_buffer(&ri[MASTER], reginfo_size());
         /* For OP_TEST_END, force exit. */
         if (res == RES_OK && op == OP_TESTEND) {
             res = RES_END;
         }
         break;
     case OP_SETMEMBLOCK:
-        memblock = (void *)(uintptr_t)get_reginfo_paramreg(&ri);
+        paramreg = get_reginfo_paramreg(&ri[MASTER]);
+        memblock = (void *)(uintptr_t)paramreg;
         break;
     case OP_GETMEMBLOCK:
-        set_ucontext_paramreg(uc,
-                              get_reginfo_paramreg(&ri) + (uintptr_t)memblock);
+        paramreg = get_reginfo_paramreg(&ri[MASTER]);
+        set_ucontext_paramreg(uc, paramreg + (uintptr_t)memblock);
         break;
     case OP_COMPAREMEM:
         return write_buffer(memblock, MEMBLOCKLEN);
@@ -162,12 +168,12 @@ static void master_sigill(int sig, siginfo_t *si, void *uc)
 
 static RisuResult recv_and_compare_register_info(void *uc)
 {
+    uint64_t paramreg;
     RisuResult res;
-    trace_header_t header;
     RisuOp op;
 
-    reginfo_init(&apprentice_ri, uc);
-    op = get_risuop(&apprentice_ri);
+    reginfo_init(&ri[APPRENTICE], uc);
+    op = get_risuop(&ri[APPRENTICE]);
 
     res = read_buffer(&header, sizeof(header));
     if (res != RES_OK) {
@@ -190,10 +196,10 @@ static RisuResult recv_and_compare_register_info(void *uc)
         /* Do a simple register compare on (a) explicit request
          * (b) end of test (c) a non-risuop UNDEF
          */
-        res = read_buffer(&master_ri, reginfo_size());
+        res = read_buffer(&ri[MASTER], reginfo_size());
         if (res != RES_OK) {
             /* fail */
-        } else if (!reginfo_is_eq(&master_ri, &apprentice_ri)) {
+        } else if (!reginfo_is_eq(&ri[MASTER], &ri[APPRENTICE])) {
             /* register mismatch */
             res = RES_MISMATCH_REG;
         } else if (op == OP_TESTEND) {
@@ -202,17 +208,18 @@ static RisuResult recv_and_compare_register_info(void *uc)
         respond(res == RES_OK ? RES_OK : RES_END);
         break;
     case OP_SETMEMBLOCK:
-        memblock = (void *)(uintptr_t)get_reginfo_paramreg(&apprentice_ri);
+        paramreg = get_reginfo_paramreg(&ri[APPRENTICE]);
+        memblock = (void *)(uintptr_t)paramreg;
         break;
     case OP_GETMEMBLOCK:
-        set_ucontext_paramreg(uc, get_reginfo_paramreg(&apprentice_ri) +
-                              (uintptr_t)memblock);
+        paramreg = get_reginfo_paramreg(&ri[APPRENTICE]);
+        set_ucontext_paramreg(uc, paramreg + (uintptr_t)memblock);
         break;
     case OP_COMPAREMEM:
-        res = read_buffer(master_memblock, MEMBLOCKLEN);
+        res = read_buffer(other_memblock, MEMBLOCKLEN);
         if (res != RES_OK) {
             /* fail */
-        } else if (memcmp(memblock, master_memblock, MEMBLOCKLEN) != 0) {
+        } else if (memcmp(memblock, other_memblock, MEMBLOCKLEN) != 0) {
             /* memory mismatch */
             res = RES_MISMATCH_MEM;
         }
@@ -221,7 +228,6 @@ static RisuResult recv_and_compare_register_info(void *uc)
     default:
         abort();
     }
-
     return res;
 }
 
@@ -342,10 +348,10 @@ static int apprentice(void)
     case RES_MISMATCH_REG:
         fprintf(stderr, "mismatch reg after %zd checkpoints\n", signal_count);
         fprintf(stderr, "master reginfo:\n");
-        reginfo_dump(&master_ri, stderr);
+        reginfo_dump(&ri[MASTER], stderr);
         fprintf(stderr, "apprentice reginfo:\n");
-        reginfo_dump(&apprentice_ri, stderr);
-        reginfo_dump_mismatch(&master_ri, &apprentice_ri, stderr);
+        reginfo_dump(&ri[APPRENTICE], stderr);
+        reginfo_dump_mismatch(&ri[MASTER], &ri[APPRENTICE], stderr);
         return EXIT_FAILURE;
 
     case RES_MISMATCH_MEM:
-- 
2.20.1



  parent reply	other threads:[~2020-05-22  2:44 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22  2:34 [PATCH v3 00/25] risu cleanups and improvements Richard Henderson
2020-05-22  2:34 ` [PATCH v3 01/25] Use bool for tracing variables Richard Henderson
2020-05-22  2:34 ` [PATCH v3 02/25] Unify master_fd and apprentice_fd to comm_fd Richard Henderson
2020-05-22  2:34 ` [PATCH v3 03/25] Hoist trace file and socket opening Richard Henderson
2020-05-22  2:34 ` [PATCH v3 04/25] Adjust tracefile open for write Richard Henderson
2020-05-22  2:34 ` [PATCH v3 05/25] Use EXIT_FAILURE, EXIT_SUCCESS Richard Henderson
2020-05-22  2:34 ` [PATCH v3 06/25] Make some risu.c symbols static Richard Henderson
2020-05-22  2:34 ` [PATCH v3 07/25] Add enum RisuOp Richard Henderson
2020-05-22  2:34 ` [PATCH v3 08/25] Add enum RisuResult Richard Henderson
2020-05-22  2:34 ` [PATCH v3 09/25] Unify i/o functions and use RisuResult Richard Henderson
2020-05-22  2:34 ` [PATCH v3 10/25] Pass non-OK result back through siglongjmp Richard Henderson
2020-05-22  2:34 ` [PATCH v3 11/25] Always write for --master Richard Henderson
2020-05-22  2:34 ` [PATCH v3 12/25] Simplify syncing with master Richard Henderson
2020-05-22  2:34 ` [PATCH v3 13/25] Split RES_MISMATCH for registers and memory Richard Henderson
2020-05-22  2:34 ` [PATCH v3 14/25] Merge reginfo.c into risu.c Richard Henderson
2020-06-23  8:33   ` Alex Bennée
2020-05-22  2:34 ` Richard Henderson [this message]
2020-06-23  8:47   ` [PATCH v3 15/25] Rearrange reginfo and memblock buffers Alex Bennée
2020-05-22  2:34 ` [PATCH v3 16/25] Split out recv_register_info Richard Henderson
2020-06-23 10:38   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 17/25] Add magic and size to the trace header Richard Henderson
2020-06-23 14:52   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 18/25] Compute reginfo_size based on the reginfo Richard Henderson
2020-06-23 14:54   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 19/25] aarch64: Reorg sve reginfo to save space Richard Henderson
2020-06-23 16:32   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 20/25] aarch64: Use arch_init to configure sve Richard Henderson
2020-06-23 16:54   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 21/25] ppc64: Use uint64_t to represent double Richard Henderson
2020-06-23 16:58   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 22/25] Standardize reginfo_dump_mismatch printing Richard Henderson
2020-06-23 17:03   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 23/25] Add --fulldump and --diffdup options Richard Henderson
2020-05-22  2:34 ` [PATCH v3 24/25] Remove return value from reginfo_dump Richard Henderson
2020-06-23 17:38   ` Alex Bennée
2020-05-22  2:34 ` [PATCH v3 25/25] ppc64: Clean up reginfo handling Richard Henderson
2020-05-22  4:10   ` Richard Henderson
2020-06-23 17:45   ` Alex Bennée
2020-06-23 18:06     ` Richard Henderson
2020-06-22 19:17 ` [PATCH v3 00/25] risu cleanups and improvements Peter Maydell
2020-06-23  8:23   ` Alex Bennée
2020-06-23  9:00 ` Alex Bennée
2020-06-23 13:30   ` Alex Bennée
2020-06-23 20:26   ` Richard Henderson
2020-06-23 14:44 ` [PATCH] risu: don't do a full register compare for OP_SIGILL Alex Bennée
2020-06-23 15:23   ` Richard Henderson
2020-06-23 15:54   ` Peter Maydell
2020-06-23 16:17     ` Alex Bennée
2020-06-23 19:55       ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522023440.26261-16-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).