* [PULL 00/43] Block layer patches
@ 2020-06-17 14:48 Kevin Wolf
2020-06-17 14:48 ` [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer Kevin Wolf
` (44 more replies)
0 siblings, 45 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
The following changes since commit 5c24bce3056ff209a1ecc50ff4b7e65b85ad8e74:
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging (2020-06-16 14:57:15 +0100)
are available in the Git repository at:
git://repo.or.cz/qemu/kevin.git tags/for-upstream
for you to fetch changes up to 3419ec713f04c323b030e0763459435335b25476:
iotests: Add copyright line in qcow2.py (2020-06-17 16:21:21 +0200)
----------------------------------------------------------------
Block layer patches:
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
----------------------------------------------------------------
Eric Blake (3):
block: Refactor subdirectory recursion during make
qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size
iotests: Add copyright line in qcow2.py
Klaus Jensen (21):
hw/block/nvme: fix pci doorbell size calculation
hw/block/nvme: rename trace events to pci_nvme
hw/block/nvme: remove superfluous breaks
hw/block/nvme: move device parameters to separate struct
hw/block/nvme: use constants in identify
hw/block/nvme: refactor nvme_addr_read
hw/block/nvme: fix pin-based interrupt behavior
hw/block/nvme: add max_ioqpairs device parameter
hw/block/nvme: remove redundant cmbloc/cmbsz members
hw/block/nvme: factor out property/constraint checks
hw/block/nvme: factor out device state setup
hw/block/nvme: factor out block backend setup
hw/block/nvme: add namespace helpers
hw/block/nvme: factor out namespace setup
hw/block/nvme: factor out pci setup
hw/block/nvme: factor out cmb setup
hw/block/nvme: factor out pmr setup
hw/block/nvme: do cmb/pmr init as part of pci init
hw/block/nvme: factor out controller identify setup
hw/block/nvme: add msix_qsize parameter
hw/block/nvme: verify msix_init_exclusive_bar() return value
Max Reitz (5):
iotests.py: Add skip_for_formats() decorator
iotests/041: Skip test_small_target for qed
iotests/292: data_file is unsupported
iotests/229: data_file is unsupported
iotests/{190,291}: compat=0.10 is unsupported
Pavel Dovgaluk (1):
icount: make dma reads deterministic
Philippe Mathieu-Daudé (2):
hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer
hw/block/nvme: Verify msix_vector_use() returned value
Roman Bolshakov (1):
.gitignore: Ignore storage-daemon files
Roman Kagan (8):
virtio-blk: store opt_io_size with correct size
block: consolidate blocksize properties consistency checks
qdev-properties: blocksize: use same limits in code and description
qdev-properties: add size32 property type
qdev-properties: make blocksize accept size suffixes
block: make BlockConf size props 32bit and accept size suffixes
qdev-properties: add getter for size32 and blocksize
block: lift blocksize property limit to 2 MiB
Sergio Lopez (2):
virtio-blk: Refactor the code that processes queued requests
virtio-blk: On restart, process queued requests in the proper context
hw/block/nvme.h | 34 ++-
include/block/nvme.h | 8 +
include/hw/block/block.h | 14 +-
include/hw/ide/internal.h | 12 +-
include/hw/qdev-properties.h | 5 +-
include/hw/virtio/virtio-blk.h | 1 +
block/qcow2-bitmap.c | 9 +-
dma-helpers.c | 22 ++
hw/block/block.c | 40 ++-
hw/block/dataplane/virtio-blk.c | 8 +
hw/block/fdc.c | 5 +-
hw/block/nvme.c | 574 +++++++++++++++++++++----------------
hw/block/swim.c | 5 +-
hw/block/virtio-blk.c | 39 +--
hw/block/xen-block.c | 6 +-
hw/core/qdev-properties.c | 85 +++++-
hw/ide/ahci.c | 18 +-
hw/ide/core.c | 6 +-
hw/ide/macio.c | 6 +-
hw/ide/pci.c | 12 +-
hw/ide/qdev.c | 5 +-
hw/scsi/scsi-disk.c | 12 +-
hw/usb/dev-storage.c | 5 +-
tests/qemu-iotests/iotests.py | 16 ++
tests/qemu-iotests/qcow2.py | 2 +
tests/qemu-iotests/qcow2_format.py | 1 +
.gitignore | 17 +-
Makefile.objs | 2 +-
block/Makefile.objs | 1 +
hw/block/trace-events | 180 ++++++------
tests/qemu-iotests/041 | 2 +
tests/qemu-iotests/118 | 7 +-
tests/qemu-iotests/172.out | 532 +++++++++++++++++-----------------
tests/qemu-iotests/190 | 2 +
tests/qemu-iotests/229 | 3 +
tests/qemu-iotests/291 | 2 +
tests/qemu-iotests/292 | 5 +
37 files changed, 1005 insertions(+), 698 deletions(-)
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 02/43] icount: make dma reads deterministic Kevin Wolf
` (43 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Handlers don't need to modify the IDEDMA structure.
Make it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200512194917.15807-1-philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/ide/internal.h | 12 ++++++------
hw/ide/ahci.c | 18 +++++++++---------
hw/ide/core.c | 6 +++---
hw/ide/macio.c | 6 +++---
hw/ide/pci.c | 12 ++++++------
5 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/include/hw/ide/internal.h b/include/hw/ide/internal.h
index 55da35d768..1a7869e85d 100644
--- a/include/hw/ide/internal.h
+++ b/include/hw/ide/internal.h
@@ -322,12 +322,12 @@ typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
typedef void EndTransferFunc(IDEState *);
-typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockCompletionFunc *);
-typedef void DMAVoidFunc(IDEDMA *);
-typedef int DMAIntFunc(IDEDMA *, bool);
-typedef int32_t DMAInt32Func(IDEDMA *, int32_t len);
-typedef void DMAu32Func(IDEDMA *, uint32_t);
-typedef void DMAStopFunc(IDEDMA *, bool);
+typedef void DMAStartFunc(const IDEDMA *, IDEState *, BlockCompletionFunc *);
+typedef void DMAVoidFunc(const IDEDMA *);
+typedef int DMAIntFunc(const IDEDMA *, bool);
+typedef int32_t DMAInt32Func(const IDEDMA *, int32_t len);
+typedef void DMAu32Func(const IDEDMA *, uint32_t);
+typedef void DMAStopFunc(const IDEDMA *, bool);
struct unreported_events {
bool eject_request;
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index fc82cbd5f1..009120f88b 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -44,7 +44,7 @@ static int handle_cmd(AHCIState *s, int port, uint8_t slot);
static void ahci_reset_port(AHCIState *s, int port);
static bool ahci_write_fis_d2h(AHCIDevice *ad);
static void ahci_init_d2h(AHCIDevice *ad);
-static int ahci_dma_prepare_buf(IDEDMA *dma, int32_t limit);
+static int ahci_dma_prepare_buf(const IDEDMA *dma, int32_t limit);
static bool ahci_map_clb_address(AHCIDevice *ad);
static bool ahci_map_fis_address(AHCIDevice *ad);
static void ahci_unmap_clb_address(AHCIDevice *ad);
@@ -1338,7 +1338,7 @@ out:
}
/* Transfer PIO data between RAM and device */
-static void ahci_pio_transfer(IDEDMA *dma)
+static void ahci_pio_transfer(const IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
@@ -1397,7 +1397,7 @@ out:
}
}
-static void ahci_start_dma(IDEDMA *dma, IDEState *s,
+static void ahci_start_dma(const IDEDMA *dma, IDEState *s,
BlockCompletionFunc *dma_cb)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
@@ -1406,7 +1406,7 @@ static void ahci_start_dma(IDEDMA *dma, IDEState *s,
dma_cb(s, 0);
}
-static void ahci_restart_dma(IDEDMA *dma)
+static void ahci_restart_dma(const IDEDMA *dma)
{
/* Nothing to do, ahci_start_dma already resets s->io_buffer_offset. */
}
@@ -1415,7 +1415,7 @@ static void ahci_restart_dma(IDEDMA *dma)
* IDE/PIO restarts are handled by the core layer, but NCQ commands
* need an extra kick from the AHCI HBA.
*/
-static void ahci_restart(IDEDMA *dma)
+static void ahci_restart(const IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
int i;
@@ -1432,7 +1432,7 @@ static void ahci_restart(IDEDMA *dma)
* Called in DMA and PIO R/W chains to read the PRDT.
* Not shared with NCQ pathways.
*/
-static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int32_t limit)
+static int32_t ahci_dma_prepare_buf(const IDEDMA *dma, int32_t limit)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
@@ -1453,7 +1453,7 @@ static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int32_t limit)
* Called via dma_buf_commit, for both DMA and PIO paths.
* sglist destruction is handled within dma_buf_commit.
*/
-static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes)
+static void ahci_commit_buf(const IDEDMA *dma, uint32_t tx_bytes)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
@@ -1461,7 +1461,7 @@ static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes)
ad->cur_cmd->status = cpu_to_le32(tx_bytes);
}
-static int ahci_dma_rw_buf(IDEDMA *dma, bool is_write)
+static int ahci_dma_rw_buf(const IDEDMA *dma, bool is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
@@ -1486,7 +1486,7 @@ static int ahci_dma_rw_buf(IDEDMA *dma, bool is_write)
return 1;
}
-static void ahci_cmd_done(IDEDMA *dma)
+static void ahci_cmd_done(const IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 689bb36409..d997a78e47 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2570,16 +2570,16 @@ static void ide_init1(IDEBus *bus, int unit)
ide_sector_write_timer_cb, s);
}
-static int ide_nop_int(IDEDMA *dma, bool is_write)
+static int ide_nop_int(const IDEDMA *dma, bool is_write)
{
return 0;
}
-static void ide_nop(IDEDMA *dma)
+static void ide_nop(const IDEDMA *dma)
{
}
-static int32_t ide_nop_int32(IDEDMA *dma, int32_t l)
+static int32_t ide_nop_int32(const IDEDMA *dma, int32_t l)
{
return 0;
}
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 30af0e93e6..62a599a075 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -376,17 +376,17 @@ static void macio_ide_reset(DeviceState *dev)
ide_bus_reset(&d->bus);
}
-static int ide_nop_int(IDEDMA *dma, bool is_write)
+static int ide_nop_int(const IDEDMA *dma, bool is_write)
{
return 0;
}
-static int32_t ide_nop_int32(IDEDMA *dma, int32_t l)
+static int32_t ide_nop_int32(const IDEDMA *dma, int32_t l)
{
return 0;
}
-static void ide_dbdma_start(IDEDMA *dma, IDEState *s,
+static void ide_dbdma_start(const IDEDMA *dma, IDEState *s,
BlockCompletionFunc *cb)
{
MACIOIDEState *m = container_of(dma, MACIOIDEState, dma);
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 97347f07f1..5e85c4ad17 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -103,7 +103,7 @@ const MemoryRegionOps pci_ide_data_le_ops = {
.endianness = DEVICE_LITTLE_ENDIAN,
};
-static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
+static void bmdma_start_dma(const IDEDMA *dma, IDEState *s,
BlockCompletionFunc *dma_cb)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
@@ -126,7 +126,7 @@ static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
* IDEState.io_buffer_size will contain the number of bytes described
* by the PRDs, whether or not we added them to the sglist.
*/
-static int32_t bmdma_prepare_buf(IDEDMA *dma, int32_t limit)
+static int32_t bmdma_prepare_buf(const IDEDMA *dma, int32_t limit)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
IDEState *s = bmdma_active_if(bm);
@@ -181,7 +181,7 @@ static int32_t bmdma_prepare_buf(IDEDMA *dma, int32_t limit)
}
/* return 0 if buffer completed */
-static int bmdma_rw_buf(IDEDMA *dma, bool is_write)
+static int bmdma_rw_buf(const IDEDMA *dma, bool is_write)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
IDEState *s = bmdma_active_if(bm);
@@ -230,7 +230,7 @@ static int bmdma_rw_buf(IDEDMA *dma, bool is_write)
return 1;
}
-static void bmdma_set_inactive(IDEDMA *dma, bool more)
+static void bmdma_set_inactive(const IDEDMA *dma, bool more)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
@@ -242,7 +242,7 @@ static void bmdma_set_inactive(IDEDMA *dma, bool more)
}
}
-static void bmdma_restart_dma(IDEDMA *dma)
+static void bmdma_restart_dma(const IDEDMA *dma)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
@@ -257,7 +257,7 @@ static void bmdma_cancel(BMDMAState *bm)
}
}
-static void bmdma_reset(IDEDMA *dma)
+static void bmdma_reset(const IDEDMA *dma)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 02/43] icount: make dma reads deterministic
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
2020-06-17 14:48 ` [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 03/43] virtio-blk: Refactor the code that processes queued requests Kevin Wolf
` (42 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
Windows guest sometimes makes DMA requests with overlapping
target addresses. This leads to the following structure of iov for
the block driver:
addr size1
addr size2
addr size3
It means that three adjacent disk blocks should be read into the same
memory buffer. Windows does not expects anything from these bytes
(should it be data from the first block, or the last one, or some mix),
but uses them somehow. It leads to non-determinism of the guest execution,
because block driver does not preserve any order of reading.
This situation was discusses in the mailing list at least twice:
https://lists.gnu.org/archive/html/qemu-devel/2010-09/msg01996.html
https://lists.gnu.org/archive/html/qemu-devel/2020-02/msg05185.html
This patch makes such disk reads deterministic in icount mode.
It splits the whole request into several parts. Parts may overlap,
but SGs inside one part do not overlap.
Parts that are processed later overwrite the prior ones in case
of overlapping.
Examples for different SG part sequences:
1)
A1 1000
A2 1000
A1 1000
A3 1000
->
One request is split into two.
A1 1000
A2 1000
--
A1 1000
A3 1000
2)
A1 800
A2 1000
A1 1000
->
A1 800
A2 1000
--
A1 1000
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <159117972206.12193.12939621311413561779.stgit@pasha-ThinkPad-X280>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
dma-helpers.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/dma-helpers.c b/dma-helpers.c
index e8a26e81e1..2a77b5a9cb 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -13,6 +13,8 @@
#include "trace-root.h"
#include "qemu/thread.h"
#include "qemu/main-loop.h"
+#include "sysemu/cpus.h"
+#include "qemu/range.h"
/* #define DEBUG_IOMMU */
@@ -142,6 +144,26 @@ static void dma_blk_cb(void *opaque, int ret)
cur_addr = dbs->sg->sg[dbs->sg_cur_index].base + dbs->sg_cur_byte;
cur_len = dbs->sg->sg[dbs->sg_cur_index].len - dbs->sg_cur_byte;
mem = dma_memory_map(dbs->sg->as, cur_addr, &cur_len, dbs->dir);
+ /*
+ * Make reads deterministic in icount mode. Windows sometimes issues
+ * disk read requests with overlapping SGs. It leads
+ * to non-determinism, because resulting buffer contents may be mixed
+ * from several sectors. This code splits all SGs into several
+ * groups. SGs in every group do not overlap.
+ */
+ if (mem && use_icount && dbs->dir == DMA_DIRECTION_FROM_DEVICE) {
+ int i;
+ for (i = 0 ; i < dbs->iov.niov ; ++i) {
+ if (ranges_overlap((intptr_t)dbs->iov.iov[i].iov_base,
+ dbs->iov.iov[i].iov_len, (intptr_t)mem,
+ cur_len)) {
+ dma_memory_unmap(dbs->sg->as, mem, cur_len,
+ dbs->dir, cur_len);
+ mem = NULL;
+ break;
+ }
+ }
+ }
if (!mem)
break;
qemu_iovec_add(&dbs->iov, mem, cur_len);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 03/43] virtio-blk: Refactor the code that processes queued requests
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
2020-06-17 14:48 ` [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer Kevin Wolf
2020-06-17 14:48 ` [PULL 02/43] icount: make dma reads deterministic Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context Kevin Wolf
` (41 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Sergio Lopez <slp@redhat.com>
Move the code that processes queued requests from
virtio_blk_dma_restart_bh() to its own, non-static, function. This
will allow us to call it from the virtio_blk_data_plane_start() in a
future patch.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20200603093240.40489-2-slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/virtio/virtio-blk.h | 1 +
hw/block/virtio-blk.c | 16 +++++++++++-----
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index 1e62f869b2..f584ad9b86 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -86,5 +86,6 @@ typedef struct MultiReqBuffer {
} MultiReqBuffer;
bool virtio_blk_handle_vq(VirtIOBlock *s, VirtQueue *vq);
+void virtio_blk_process_queued_requests(VirtIOBlock *s);
#endif
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index f5f6fc925e..978574e4da 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -819,15 +819,11 @@ static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
virtio_blk_handle_output_do(s, vq);
}
-static void virtio_blk_dma_restart_bh(void *opaque)
+void virtio_blk_process_queued_requests(VirtIOBlock *s)
{
- VirtIOBlock *s = opaque;
VirtIOBlockReq *req = s->rq;
MultiReqBuffer mrb = {};
- qemu_bh_delete(s->bh);
- s->bh = NULL;
-
s->rq = NULL;
aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
@@ -855,6 +851,16 @@ static void virtio_blk_dma_restart_bh(void *opaque)
aio_context_release(blk_get_aio_context(s->conf.conf.blk));
}
+static void virtio_blk_dma_restart_bh(void *opaque)
+{
+ VirtIOBlock *s = opaque;
+
+ qemu_bh_delete(s->bh);
+ s->bh = NULL;
+
+ virtio_blk_process_queued_requests(s);
+}
+
static void virtio_blk_dma_restart_cb(void *opaque, int running,
RunState state)
{
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (2 preceding siblings ...)
2020-06-17 14:48 ` [PULL 03/43] virtio-blk: Refactor the code that processes queued requests Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 05/43] block: Refactor subdirectory recursion during make Kevin Wolf
` (40 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Sergio Lopez <slp@redhat.com>
On restart, we were scheduling a BH to process queued requests, which
would run before starting up the data plane, leading to those requests
being assigned and started on coroutines on the main context.
This could cause requests to be wrongly processed in parallel from
different threads (the main thread and the iothread managing the data
plane), potentially leading to multiple issues.
For example, stopping and resuming a VM multiple times while the guest
is generating I/O on a virtio_blk device can trigger a crash with a
stack tracing looking like this one:
<------>
Thread 2 (Thread 0x7ff736765700 (LWP 1062503)):
#0 0x00005567a13b99d6 in iov_memset
(iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803)
at util/iov.c:69
#1 0x00005567a13bab73 in qemu_iovec_memset
(qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530
#2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86
#3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217
#4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323
#5 0x00005567a12f43d9 in qemu_laio_process_completions_and_submit (s=0x7ff7182e8420)
at block/linux-aio.c:236
#6 0x00005567a12f44c2 in qemu_laio_poll_cb (opaque=0x7ff7182e8430) at block/linux-aio.c:267
#7 0x00005567a13aed83 in run_poll_handlers_once (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8)
at util/aio-posix.c:520
#8 0x00005567a13aee9f in run_poll_handlers (ctx=0x5567a2b58c70, max_ns=16000, timeout=0x7ff7367645f8)
at util/aio-posix.c:562
#9 0x00005567a13aefde in try_poll_mode (ctx=0x5567a2b58c70, timeout=0x7ff7367645f8)
at util/aio-posix.c:597
#10 0x00005567a13af115 in aio_poll (ctx=0x5567a2b58c70, blocking=true) at util/aio-posix.c:639
#11 0x00005567a109acca in iothread_run (opaque=0x5567a2b29760) at iothread.c:75
#12 0x00005567a13b2790 in qemu_thread_start (args=0x5567a2b694c0) at util/qemu-thread-posix.c:519
#13 0x00007ff73eedf2de in start_thread () at /lib64/libpthread.so.0
#14 0x00007ff73ec10e83 in clone () at /lib64/libc.so.6
Thread 1 (Thread 0x7ff743986f00 (LWP 1062500)):
#0 0x00005567a13b99d6 in iov_memset
(iov=0x6563617073206f4e, iov_cnt=1717922848, offset=516096, fillc=0, bytes=7018105756081554803)
at util/iov.c:69
#1 0x00005567a13bab73 in qemu_iovec_memset
(qiov=0x7ff73ec99748, offset=516096, fillc=0, bytes=7018105756081554803) at util/iov.c:530
#2 0x00005567a12f411c in qemu_laio_process_completion (laiocb=0x7ff6512ee6c0) at block/linux-aio.c:86
#3 0x00005567a12f42ff in qemu_laio_process_completions (s=0x7ff7182e8420) at block/linux-aio.c:217
#4 0x00005567a12f480d in ioq_submit (s=0x7ff7182e8420) at block/linux-aio.c:323
#5 0x00005567a12f4a2f in laio_do_submit (fd=19, laiocb=0x7ff5f4ff9ae0, offset=472363008, type=2)
at block/linux-aio.c:375
#6 0x00005567a12f4af2 in laio_co_submit
(bs=0x5567a2b8c460, s=0x7ff7182e8420, fd=19, offset=472363008, qiov=0x7ff5f4ff9ca0, type=2)
at block/linux-aio.c:394
#7 0x00005567a12f1803 in raw_co_prw
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, type=2)
at block/file-posix.c:1892
#8 0x00005567a12f1941 in raw_co_pwritev
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, flags=0)
at block/file-posix.c:1925
#9 0x00005567a12fe3e1 in bdrv_driver_pwritev
(bs=0x5567a2b8c460, offset=472363008, bytes=20480, qiov=0x7ff5f4ff9ca0, qiov_offset=0, flags=0)
at block/io.c:1183
#10 0x00005567a1300340 in bdrv_aligned_pwritev
(child=0x5567a2b5b070, req=0x7ff5f4ff9db0, offset=472363008, bytes=20480, align=512, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0) at block/io.c:1980
#11 0x00005567a1300b29 in bdrv_co_pwritev_part
(child=0x5567a2b5b070, offset=472363008, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, flags=0)
at block/io.c:2137
#12 0x00005567a12baba1 in qcow2_co_pwritev_task
(bs=0x5567a2b92740, file_cluster_offset=472317952, offset=487305216, bytes=20480, qiov=0x7ff72c0425b8, qiov_offset=0, l2meta=0x0) at block/qcow2.c:2444
#13 0x00005567a12bacdb in qcow2_co_pwritev_task_entry (task=0x5567a2b48540) at block/qcow2.c:2475
#14 0x00005567a13167d8 in aio_task_co (opaque=0x5567a2b48540) at block/aio_task.c:45
#15 0x00005567a13cf00c in coroutine_trampoline (i0=738245600, i1=32759) at util/coroutine-ucontext.c:115
#16 0x00007ff73eb622e0 in __start_context () at /lib64/libc.so.6
#17 0x00007ff6626f1350 in ()
#18 0x0000000000000000 in ()
<------>
This is also known to cause crashes with this message (assertion
failed):
aio_co_schedule: Co-routine was already scheduled in 'aio_co_schedule'
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1812765
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20200603093240.40489-3-slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/virtio/virtio-blk.h | 2 +-
hw/block/dataplane/virtio-blk.c | 8 ++++++++
hw/block/virtio-blk.c | 18 ++++++++++++------
3 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index f584ad9b86..b1334c3904 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -86,6 +86,6 @@ typedef struct MultiReqBuffer {
} MultiReqBuffer;
bool virtio_blk_handle_vq(VirtIOBlock *s, VirtQueue *vq);
-void virtio_blk_process_queued_requests(VirtIOBlock *s);
+void virtio_blk_process_queued_requests(VirtIOBlock *s, bool is_bh);
#endif
diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
index 1b52e8159c..37499c5564 100644
--- a/hw/block/dataplane/virtio-blk.c
+++ b/hw/block/dataplane/virtio-blk.c
@@ -220,6 +220,9 @@ int virtio_blk_data_plane_start(VirtIODevice *vdev)
goto fail_guest_notifiers;
}
+ /* Process queued requests before the ones in vring */
+ virtio_blk_process_queued_requests(vblk, false);
+
/* Kick right away to begin processing requests already in vring */
for (i = 0; i < nvqs; i++) {
VirtQueue *vq = virtio_get_queue(s->vdev, i);
@@ -239,6 +242,11 @@ int virtio_blk_data_plane_start(VirtIODevice *vdev)
return 0;
fail_guest_notifiers:
+ /*
+ * If we failed to set up the guest notifiers queued requests will be
+ * processed on the main context.
+ */
+ virtio_blk_process_queued_requests(vblk, false);
vblk->dataplane_disabled = true;
s->starting = false;
vblk->dataplane_started = true;
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 978574e4da..8882a1d1d4 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -819,7 +819,7 @@ static void virtio_blk_handle_output(VirtIODevice *vdev, VirtQueue *vq)
virtio_blk_handle_output_do(s, vq);
}
-void virtio_blk_process_queued_requests(VirtIOBlock *s)
+void virtio_blk_process_queued_requests(VirtIOBlock *s, bool is_bh)
{
VirtIOBlockReq *req = s->rq;
MultiReqBuffer mrb = {};
@@ -847,7 +847,9 @@ void virtio_blk_process_queued_requests(VirtIOBlock *s)
if (mrb.num_reqs) {
virtio_blk_submit_multireq(s->blk, &mrb);
}
- blk_dec_in_flight(s->conf.conf.blk);
+ if (is_bh) {
+ blk_dec_in_flight(s->conf.conf.blk);
+ }
aio_context_release(blk_get_aio_context(s->conf.conf.blk));
}
@@ -858,21 +860,25 @@ static void virtio_blk_dma_restart_bh(void *opaque)
qemu_bh_delete(s->bh);
s->bh = NULL;
- virtio_blk_process_queued_requests(s);
+ virtio_blk_process_queued_requests(s, true);
}
static void virtio_blk_dma_restart_cb(void *opaque, int running,
RunState state)
{
VirtIOBlock *s = opaque;
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
+ VirtioBusState *bus = VIRTIO_BUS(qbus);
if (!running) {
return;
}
- if (!s->bh) {
- /* FIXME The data plane is not started yet, so these requests are
- * processed in the main thread. */
+ /*
+ * If ioeventfd is enabled, don't schedule the BH here as queued
+ * requests will be processed while starting the data plane.
+ */
+ if (!s->bh && !virtio_bus_ioeventfd_enabled(bus)) {
s->bh = aio_bh_new(blk_get_aio_context(s->conf.conf.blk),
virtio_blk_dma_restart_bh, s);
blk_inc_in_flight(s->conf.conf.blk);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 05/43] block: Refactor subdirectory recursion during make
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (3 preceding siblings ...)
2020-06-17 14:48 ` [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size Kevin Wolf
` (39 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Eric Blake <eblake@redhat.com>
Rather than listing block/monitor from the top-level Makefile.objs, we
should instead list monitor from block/Makefile.objs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Fixes: bb4e58c613
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608173339.3244211-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
Makefile.objs | 2 +-
block/Makefile.objs | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/Makefile.objs b/Makefile.objs
index c09d95dfe3..7ce2588b89 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -13,7 +13,7 @@ chardev-obj-y = chardev/
authz-obj-y = authz/
-block-obj-y = block/ block/monitor/ nbd/ scsi/
+block-obj-y = block/ nbd/ scsi/
block-obj-y += block.o blockjob.o job.o
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
diff --git a/block/Makefile.objs b/block/Makefile.objs
index 3635b6b4c1..96028eedce 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -46,6 +46,7 @@ block-obj-y += aio_task.o
block-obj-y += backup-top.o
block-obj-y += filter-compress.o
common-obj-y += monitor/
+block-obj-y += monitor/
block-obj-y += stream.o
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (4 preceding siblings ...)
2020-06-17 14:48 ` [PULL 05/43] block: Refactor subdirectory recursion during make Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation Kevin Wolf
` (38 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Eric Blake <eblake@redhat.com>
For now, we don't have persistent bitmaps in any other formats, but
that might not be true in the future. Make it obvious that our
incoming parameter is not necessarily a qcow2 image, and therefore is
limited to just the bdrv_dirty_bitmap_* API calls (rather than probing
into qcow2 internals).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608190821.3293867-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2-bitmap.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 7bf12502da..1f38806ca6 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1757,19 +1757,20 @@ bool qcow2_supports_persistent_dirty_bitmap(BlockDriverState *bs)
}
/*
- * Compute the space required for bitmaps in @bs.
+ * Compute the space required to copy bitmaps from @in_bs.
*
* The computation is based as if copying to a new image with the
- * given @cluster_size, which may differ from the cluster size in @bs.
+ * given @cluster_size, which may differ from the cluster size in
+ * @in_bs; in fact, @in_bs might be something other than qcow2.
*/
-uint64_t qcow2_get_persistent_dirty_bitmap_size(BlockDriverState *bs,
+uint64_t qcow2_get_persistent_dirty_bitmap_size(BlockDriverState *in_bs,
uint32_t cluster_size)
{
uint64_t bitmaps_size = 0;
BdrvDirtyBitmap *bm;
size_t bitmap_dir_size = 0;
- FOR_EACH_DIRTY_BITMAP(bs, bm) {
+ FOR_EACH_DIRTY_BITMAP(in_bs, bm) {
if (bdrv_dirty_bitmap_get_persistence(bm)) {
const char *name = bdrv_dirty_bitmap_name(bm);
uint32_t granularity = bdrv_dirty_bitmap_granularity(bm);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (5 preceding siblings ...)
2020-06-17 14:48 ` [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 08/43] hw/block/nvme: rename trace events to pci_nvme Kevin Wolf
` (37 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
The size of the BAR is 0x1000 (main registers) + 8 bytes for each
queue. Currently, the size of the BAR is calculated like so:
n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4);
Since the 'num_queues' parameter already accounts for the admin queue,
this should in any case not need to be incremented by one. Also, the
size should be initialized to (0x1000).
n->reg_size = pow2ceil(0x1000 + 2 * n->num_queues * 4);
This, with the default value of num_queues (64), we will set aside room
for 1 admin queue and 63 I/O queues (4 bytes per doorbell, 2 doorbells
per queue).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-2-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index a21eeca2fb..c1476e8b2a 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -53,6 +53,9 @@
#include "trace.h"
#include "nvme.h"
+#define NVME_REG_SIZE 0x1000
+#define NVME_DB_SIZE 4
+
#define NVME_GUEST_ERR(trace, fmt, ...) \
do { \
(trace_##trace)(__VA_ARGS__); \
@@ -1401,7 +1404,9 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
pcie_endpoint_cap_init(pci_dev, 0x80);
n->num_namespaces = 1;
- n->reg_size = pow2ceil(0x1004 + 2 * (n->num_queues + 1) * 4);
+
+ /* num_queues is really number of pairs, so each has two doorbells */
+ n->reg_size = pow2ceil(NVME_REG_SIZE + 2 * n->num_queues * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 08/43] hw/block/nvme: rename trace events to pci_nvme
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (6 preceding siblings ...)
2020-06-17 14:48 ` [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 09/43] hw/block/nvme: remove superfluous breaks Kevin Wolf
` (36 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Change the prefix of all nvme device related trace events to 'pci_nvme'
to not clash with trace events from the nvme block driver.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-3-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 198 +++++++++++++++++++++---------------------
hw/block/trace-events | 180 +++++++++++++++++++-------------------
2 files changed, 188 insertions(+), 190 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index c1476e8b2a..e8f5c5ab82 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -125,16 +125,16 @@ static void nvme_irq_assert(NvmeCtrl *n, NvmeCQueue *cq)
{
if (cq->irq_enabled) {
if (msix_enabled(&(n->parent_obj))) {
- trace_nvme_irq_msix(cq->vector);
+ trace_pci_nvme_irq_msix(cq->vector);
msix_notify(&(n->parent_obj), cq->vector);
} else {
- trace_nvme_irq_pin();
+ trace_pci_nvme_irq_pin();
assert(cq->cqid < 64);
n->irq_status |= 1 << cq->cqid;
nvme_irq_check(n);
}
} else {
- trace_nvme_irq_masked();
+ trace_pci_nvme_irq_masked();
}
}
@@ -159,7 +159,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
int num_prps = (len >> n->page_bits) + 1;
if (unlikely(!prp1)) {
- trace_nvme_err_invalid_prp();
+ trace_pci_nvme_err_invalid_prp();
return NVME_INVALID_FIELD | NVME_DNR;
} else if (n->cmbsz && prp1 >= n->ctrl_mem.addr &&
prp1 < n->ctrl_mem.addr + int128_get64(n->ctrl_mem.size)) {
@@ -173,7 +173,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
len -= trans_len;
if (len) {
if (unlikely(!prp2)) {
- trace_nvme_err_invalid_prp2_missing();
+ trace_pci_nvme_err_invalid_prp2_missing();
goto unmap;
}
if (len > n->page_size) {
@@ -189,7 +189,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
if (i == n->max_prp_ents - 1 && len > n->page_size) {
if (unlikely(!prp_ent || prp_ent & (n->page_size - 1))) {
- trace_nvme_err_invalid_prplist_ent(prp_ent);
+ trace_pci_nvme_err_invalid_prplist_ent(prp_ent);
goto unmap;
}
@@ -202,7 +202,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
}
if (unlikely(!prp_ent || prp_ent & (n->page_size - 1))) {
- trace_nvme_err_invalid_prplist_ent(prp_ent);
+ trace_pci_nvme_err_invalid_prplist_ent(prp_ent);
goto unmap;
}
@@ -217,7 +217,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
}
} else {
if (unlikely(prp2 & (n->page_size - 1))) {
- trace_nvme_err_invalid_prp2_align(prp2);
+ trace_pci_nvme_err_invalid_prp2_align(prp2);
goto unmap;
}
if (qsg->nsg) {
@@ -265,20 +265,20 @@ static uint16_t nvme_dma_read_prp(NvmeCtrl *n, uint8_t *ptr, uint32_t len,
QEMUIOVector iov;
uint16_t status = NVME_SUCCESS;
- trace_nvme_dma_read(prp1, prp2);
+ trace_pci_nvme_dma_read(prp1, prp2);
if (nvme_map_prp(&qsg, &iov, prp1, prp2, len, n)) {
return NVME_INVALID_FIELD | NVME_DNR;
}
if (qsg.nsg > 0) {
if (unlikely(dma_buf_read(ptr, len, &qsg))) {
- trace_nvme_err_invalid_dma();
+ trace_pci_nvme_err_invalid_dma();
status = NVME_INVALID_FIELD | NVME_DNR;
}
qemu_sglist_destroy(&qsg);
} else {
if (unlikely(qemu_iovec_from_buf(&iov, 0, ptr, len) != len)) {
- trace_nvme_err_invalid_dma();
+ trace_pci_nvme_err_invalid_dma();
status = NVME_INVALID_FIELD | NVME_DNR;
}
qemu_iovec_destroy(&iov);
@@ -367,7 +367,7 @@ static uint16_t nvme_write_zeros(NvmeCtrl *n, NvmeNamespace *ns, NvmeCmd *cmd,
uint32_t count = nlb << data_shift;
if (unlikely(slba + nlb > ns->id_ns.nsze)) {
- trace_nvme_err_invalid_lba_range(slba, nlb, ns->id_ns.nsze);
+ trace_pci_nvme_err_invalid_lba_range(slba, nlb, ns->id_ns.nsze);
return NVME_LBA_RANGE | NVME_DNR;
}
@@ -395,11 +395,11 @@ static uint16_t nvme_rw(NvmeCtrl *n, NvmeNamespace *ns, NvmeCmd *cmd,
int is_write = rw->opcode == NVME_CMD_WRITE ? 1 : 0;
enum BlockAcctType acct = is_write ? BLOCK_ACCT_WRITE : BLOCK_ACCT_READ;
- trace_nvme_rw(is_write ? "write" : "read", nlb, data_size, slba);
+ trace_pci_nvme_rw(is_write ? "write" : "read", nlb, data_size, slba);
if (unlikely((slba + nlb) > ns->id_ns.nsze)) {
block_acct_invalid(blk_get_stats(n->conf.blk), acct);
- trace_nvme_err_invalid_lba_range(slba, nlb, ns->id_ns.nsze);
+ trace_pci_nvme_err_invalid_lba_range(slba, nlb, ns->id_ns.nsze);
return NVME_LBA_RANGE | NVME_DNR;
}
@@ -434,7 +434,7 @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
uint32_t nsid = le32_to_cpu(cmd->nsid);
if (unlikely(nsid == 0 || nsid > n->num_namespaces)) {
- trace_nvme_err_invalid_ns(nsid, n->num_namespaces);
+ trace_pci_nvme_err_invalid_ns(nsid, n->num_namespaces);
return NVME_INVALID_NSID | NVME_DNR;
}
@@ -448,7 +448,7 @@ static uint16_t nvme_io_cmd(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
case NVME_CMD_READ:
return nvme_rw(n, ns, cmd, req);
default:
- trace_nvme_err_invalid_opc(cmd->opcode);
+ trace_pci_nvme_err_invalid_opc(cmd->opcode);
return NVME_INVALID_OPCODE | NVME_DNR;
}
}
@@ -473,11 +473,11 @@ static uint16_t nvme_del_sq(NvmeCtrl *n, NvmeCmd *cmd)
uint16_t qid = le16_to_cpu(c->qid);
if (unlikely(!qid || nvme_check_sqid(n, qid))) {
- trace_nvme_err_invalid_del_sq(qid);
+ trace_pci_nvme_err_invalid_del_sq(qid);
return NVME_INVALID_QID | NVME_DNR;
}
- trace_nvme_del_sq(qid);
+ trace_pci_nvme_del_sq(qid);
sq = n->sq[qid];
while (!QTAILQ_EMPTY(&sq->out_req_list)) {
@@ -541,26 +541,26 @@ static uint16_t nvme_create_sq(NvmeCtrl *n, NvmeCmd *cmd)
uint16_t qflags = le16_to_cpu(c->sq_flags);
uint64_t prp1 = le64_to_cpu(c->prp1);
- trace_nvme_create_sq(prp1, sqid, cqid, qsize, qflags);
+ trace_pci_nvme_create_sq(prp1, sqid, cqid, qsize, qflags);
if (unlikely(!cqid || nvme_check_cqid(n, cqid))) {
- trace_nvme_err_invalid_create_sq_cqid(cqid);
+ trace_pci_nvme_err_invalid_create_sq_cqid(cqid);
return NVME_INVALID_CQID | NVME_DNR;
}
if (unlikely(!sqid || !nvme_check_sqid(n, sqid))) {
- trace_nvme_err_invalid_create_sq_sqid(sqid);
+ trace_pci_nvme_err_invalid_create_sq_sqid(sqid);
return NVME_INVALID_QID | NVME_DNR;
}
if (unlikely(!qsize || qsize > NVME_CAP_MQES(n->bar.cap))) {
- trace_nvme_err_invalid_create_sq_size(qsize);
+ trace_pci_nvme_err_invalid_create_sq_size(qsize);
return NVME_MAX_QSIZE_EXCEEDED | NVME_DNR;
}
if (unlikely(!prp1 || prp1 & (n->page_size - 1))) {
- trace_nvme_err_invalid_create_sq_addr(prp1);
+ trace_pci_nvme_err_invalid_create_sq_addr(prp1);
return NVME_INVALID_FIELD | NVME_DNR;
}
if (unlikely(!(NVME_SQ_FLAGS_PC(qflags)))) {
- trace_nvme_err_invalid_create_sq_qflags(NVME_SQ_FLAGS_PC(qflags));
+ trace_pci_nvme_err_invalid_create_sq_qflags(NVME_SQ_FLAGS_PC(qflags));
return NVME_INVALID_FIELD | NVME_DNR;
}
sq = g_malloc0(sizeof(*sq));
@@ -586,17 +586,17 @@ static uint16_t nvme_del_cq(NvmeCtrl *n, NvmeCmd *cmd)
uint16_t qid = le16_to_cpu(c->qid);
if (unlikely(!qid || nvme_check_cqid(n, qid))) {
- trace_nvme_err_invalid_del_cq_cqid(qid);
+ trace_pci_nvme_err_invalid_del_cq_cqid(qid);
return NVME_INVALID_CQID | NVME_DNR;
}
cq = n->cq[qid];
if (unlikely(!QTAILQ_EMPTY(&cq->sq_list))) {
- trace_nvme_err_invalid_del_cq_notempty(qid);
+ trace_pci_nvme_err_invalid_del_cq_notempty(qid);
return NVME_INVALID_QUEUE_DEL;
}
nvme_irq_deassert(n, cq);
- trace_nvme_del_cq(qid);
+ trace_pci_nvme_del_cq(qid);
nvme_free_cq(cq, n);
return NVME_SUCCESS;
}
@@ -629,27 +629,27 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
uint16_t qflags = le16_to_cpu(c->cq_flags);
uint64_t prp1 = le64_to_cpu(c->prp1);
- trace_nvme_create_cq(prp1, cqid, vector, qsize, qflags,
- NVME_CQ_FLAGS_IEN(qflags) != 0);
+ trace_pci_nvme_create_cq(prp1, cqid, vector, qsize, qflags,
+ NVME_CQ_FLAGS_IEN(qflags) != 0);
if (unlikely(!cqid || !nvme_check_cqid(n, cqid))) {
- trace_nvme_err_invalid_create_cq_cqid(cqid);
+ trace_pci_nvme_err_invalid_create_cq_cqid(cqid);
return NVME_INVALID_CQID | NVME_DNR;
}
if (unlikely(!qsize || qsize > NVME_CAP_MQES(n->bar.cap))) {
- trace_nvme_err_invalid_create_cq_size(qsize);
+ trace_pci_nvme_err_invalid_create_cq_size(qsize);
return NVME_MAX_QSIZE_EXCEEDED | NVME_DNR;
}
if (unlikely(!prp1)) {
- trace_nvme_err_invalid_create_cq_addr(prp1);
+ trace_pci_nvme_err_invalid_create_cq_addr(prp1);
return NVME_INVALID_FIELD | NVME_DNR;
}
if (unlikely(vector > n->num_queues)) {
- trace_nvme_err_invalid_create_cq_vector(vector);
+ trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
if (unlikely(!(NVME_CQ_FLAGS_PC(qflags)))) {
- trace_nvme_err_invalid_create_cq_qflags(NVME_CQ_FLAGS_PC(qflags));
+ trace_pci_nvme_err_invalid_create_cq_qflags(NVME_CQ_FLAGS_PC(qflags));
return NVME_INVALID_FIELD | NVME_DNR;
}
@@ -664,7 +664,7 @@ static uint16_t nvme_identify_ctrl(NvmeCtrl *n, NvmeIdentify *c)
uint64_t prp1 = le64_to_cpu(c->prp1);
uint64_t prp2 = le64_to_cpu(c->prp2);
- trace_nvme_identify_ctrl();
+ trace_pci_nvme_identify_ctrl();
return nvme_dma_read_prp(n, (uint8_t *)&n->id_ctrl, sizeof(n->id_ctrl),
prp1, prp2);
@@ -677,10 +677,10 @@ static uint16_t nvme_identify_ns(NvmeCtrl *n, NvmeIdentify *c)
uint64_t prp1 = le64_to_cpu(c->prp1);
uint64_t prp2 = le64_to_cpu(c->prp2);
- trace_nvme_identify_ns(nsid);
+ trace_pci_nvme_identify_ns(nsid);
if (unlikely(nsid == 0 || nsid > n->num_namespaces)) {
- trace_nvme_err_invalid_ns(nsid, n->num_namespaces);
+ trace_pci_nvme_err_invalid_ns(nsid, n->num_namespaces);
return NVME_INVALID_NSID | NVME_DNR;
}
@@ -700,7 +700,7 @@ static uint16_t nvme_identify_nslist(NvmeCtrl *n, NvmeIdentify *c)
uint16_t ret;
int i, j = 0;
- trace_nvme_identify_nslist(min_nsid);
+ trace_pci_nvme_identify_nslist(min_nsid);
list = g_malloc0(data_len);
for (i = 0; i < n->num_namespaces; i++) {
@@ -729,14 +729,14 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd)
case 0x02:
return nvme_identify_nslist(n, c);
default:
- trace_nvme_err_invalid_identify_cns(le32_to_cpu(c->cns));
+ trace_pci_nvme_err_invalid_identify_cns(le32_to_cpu(c->cns));
return NVME_INVALID_FIELD | NVME_DNR;
}
}
static inline void nvme_set_timestamp(NvmeCtrl *n, uint64_t ts)
{
- trace_nvme_setfeat_timestamp(ts);
+ trace_pci_nvme_setfeat_timestamp(ts);
n->host_timestamp = le64_to_cpu(ts);
n->timestamp_set_qemu_clock_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
@@ -769,7 +769,7 @@ static inline uint64_t nvme_get_timestamp(const NvmeCtrl *n)
/* If the host timestamp is non-zero, set the timestamp origin */
ts.origin = n->host_timestamp ? 0x01 : 0x00;
- trace_nvme_getfeat_timestamp(ts.all);
+ trace_pci_nvme_getfeat_timestamp(ts.all);
return cpu_to_le64(ts.all);
}
@@ -793,17 +793,17 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
switch (dw10) {
case NVME_VOLATILE_WRITE_CACHE:
result = blk_enable_write_cache(n->conf.blk);
- trace_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
+ trace_pci_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
break;
case NVME_NUMBER_OF_QUEUES:
result = cpu_to_le32((n->num_queues - 2) | ((n->num_queues - 2) << 16));
- trace_nvme_getfeat_numq(result);
+ trace_pci_nvme_getfeat_numq(result);
break;
case NVME_TIMESTAMP:
return nvme_get_feature_timestamp(n, cmd);
break;
default:
- trace_nvme_err_invalid_getfeat(dw10);
+ trace_pci_nvme_err_invalid_getfeat(dw10);
return NVME_INVALID_FIELD | NVME_DNR;
}
@@ -839,9 +839,9 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
blk_set_enable_write_cache(n->conf.blk, dw11 & 1);
break;
case NVME_NUMBER_OF_QUEUES:
- trace_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
- ((dw11 >> 16) & 0xFFFF) + 1,
- n->num_queues - 1, n->num_queues - 1);
+ trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
+ ((dw11 >> 16) & 0xFFFF) + 1,
+ n->num_queues - 1, n->num_queues - 1);
req->cqe.result =
cpu_to_le32((n->num_queues - 2) | ((n->num_queues - 2) << 16));
break;
@@ -851,7 +851,7 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
break;
default:
- trace_nvme_err_invalid_setfeat(dw10);
+ trace_pci_nvme_err_invalid_setfeat(dw10);
return NVME_INVALID_FIELD | NVME_DNR;
}
return NVME_SUCCESS;
@@ -875,7 +875,7 @@ static uint16_t nvme_admin_cmd(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
case NVME_ADM_CMD_GET_FEATURES:
return nvme_get_feature(n, cmd, req);
default:
- trace_nvme_err_invalid_admin_opc(cmd->opcode);
+ trace_pci_nvme_err_invalid_admin_opc(cmd->opcode);
return NVME_INVALID_OPCODE | NVME_DNR;
}
}
@@ -938,77 +938,77 @@ static int nvme_start_ctrl(NvmeCtrl *n)
uint32_t page_size = 1 << page_bits;
if (unlikely(n->cq[0])) {
- trace_nvme_err_startfail_cq();
+ trace_pci_nvme_err_startfail_cq();
return -1;
}
if (unlikely(n->sq[0])) {
- trace_nvme_err_startfail_sq();
+ trace_pci_nvme_err_startfail_sq();
return -1;
}
if (unlikely(!n->bar.asq)) {
- trace_nvme_err_startfail_nbarasq();
+ trace_pci_nvme_err_startfail_nbarasq();
return -1;
}
if (unlikely(!n->bar.acq)) {
- trace_nvme_err_startfail_nbaracq();
+ trace_pci_nvme_err_startfail_nbaracq();
return -1;
}
if (unlikely(n->bar.asq & (page_size - 1))) {
- trace_nvme_err_startfail_asq_misaligned(n->bar.asq);
+ trace_pci_nvme_err_startfail_asq_misaligned(n->bar.asq);
return -1;
}
if (unlikely(n->bar.acq & (page_size - 1))) {
- trace_nvme_err_startfail_acq_misaligned(n->bar.acq);
+ trace_pci_nvme_err_startfail_acq_misaligned(n->bar.acq);
return -1;
}
if (unlikely(NVME_CC_MPS(n->bar.cc) <
NVME_CAP_MPSMIN(n->bar.cap))) {
- trace_nvme_err_startfail_page_too_small(
+ trace_pci_nvme_err_startfail_page_too_small(
NVME_CC_MPS(n->bar.cc),
NVME_CAP_MPSMIN(n->bar.cap));
return -1;
}
if (unlikely(NVME_CC_MPS(n->bar.cc) >
NVME_CAP_MPSMAX(n->bar.cap))) {
- trace_nvme_err_startfail_page_too_large(
+ trace_pci_nvme_err_startfail_page_too_large(
NVME_CC_MPS(n->bar.cc),
NVME_CAP_MPSMAX(n->bar.cap));
return -1;
}
if (unlikely(NVME_CC_IOCQES(n->bar.cc) <
NVME_CTRL_CQES_MIN(n->id_ctrl.cqes))) {
- trace_nvme_err_startfail_cqent_too_small(
+ trace_pci_nvme_err_startfail_cqent_too_small(
NVME_CC_IOCQES(n->bar.cc),
NVME_CTRL_CQES_MIN(n->bar.cap));
return -1;
}
if (unlikely(NVME_CC_IOCQES(n->bar.cc) >
NVME_CTRL_CQES_MAX(n->id_ctrl.cqes))) {
- trace_nvme_err_startfail_cqent_too_large(
+ trace_pci_nvme_err_startfail_cqent_too_large(
NVME_CC_IOCQES(n->bar.cc),
NVME_CTRL_CQES_MAX(n->bar.cap));
return -1;
}
if (unlikely(NVME_CC_IOSQES(n->bar.cc) <
NVME_CTRL_SQES_MIN(n->id_ctrl.sqes))) {
- trace_nvme_err_startfail_sqent_too_small(
+ trace_pci_nvme_err_startfail_sqent_too_small(
NVME_CC_IOSQES(n->bar.cc),
NVME_CTRL_SQES_MIN(n->bar.cap));
return -1;
}
if (unlikely(NVME_CC_IOSQES(n->bar.cc) >
NVME_CTRL_SQES_MAX(n->id_ctrl.sqes))) {
- trace_nvme_err_startfail_sqent_too_large(
+ trace_pci_nvme_err_startfail_sqent_too_large(
NVME_CC_IOSQES(n->bar.cc),
NVME_CTRL_SQES_MAX(n->bar.cap));
return -1;
}
if (unlikely(!NVME_AQA_ASQS(n->bar.aqa))) {
- trace_nvme_err_startfail_asqent_sz_zero();
+ trace_pci_nvme_err_startfail_asqent_sz_zero();
return -1;
}
if (unlikely(!NVME_AQA_ACQS(n->bar.aqa))) {
- trace_nvme_err_startfail_acqent_sz_zero();
+ trace_pci_nvme_err_startfail_acqent_sz_zero();
return -1;
}
@@ -1031,14 +1031,14 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
unsigned size)
{
if (unlikely(offset & (sizeof(uint32_t) - 1))) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_misaligned32,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_misaligned32,
"MMIO write not 32-bit aligned,"
" offset=0x%"PRIx64"", offset);
/* should be ignored, fall through for now */
}
if (unlikely(size < sizeof(uint32_t))) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_toosmall,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_toosmall,
"MMIO write smaller than 32-bits,"
" offset=0x%"PRIx64", size=%u",
offset, size);
@@ -1048,32 +1048,30 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
switch (offset) {
case 0xc: /* INTMS */
if (unlikely(msix_enabled(&(n->parent_obj)))) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_intmask_with_msix,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_intmask_with_msix,
"undefined access to interrupt mask set"
" when MSI-X is enabled");
/* should be ignored, fall through for now */
}
n->bar.intms |= data & 0xffffffff;
n->bar.intmc = n->bar.intms;
- trace_nvme_mmio_intm_set(data & 0xffffffff,
- n->bar.intmc);
+ trace_pci_nvme_mmio_intm_set(data & 0xffffffff, n->bar.intmc);
nvme_irq_check(n);
break;
case 0x10: /* INTMC */
if (unlikely(msix_enabled(&(n->parent_obj)))) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_intmask_with_msix,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_intmask_with_msix,
"undefined access to interrupt mask clr"
" when MSI-X is enabled");
/* should be ignored, fall through for now */
}
n->bar.intms &= ~(data & 0xffffffff);
n->bar.intmc = n->bar.intms;
- trace_nvme_mmio_intm_clr(data & 0xffffffff,
- n->bar.intmc);
+ trace_pci_nvme_mmio_intm_clr(data & 0xffffffff, n->bar.intmc);
nvme_irq_check(n);
break;
case 0x14: /* CC */
- trace_nvme_mmio_cfg(data & 0xffffffff);
+ trace_pci_nvme_mmio_cfg(data & 0xffffffff);
/* Windows first sends data, then sends enable bit */
if (!NVME_CC_EN(data) && !NVME_CC_EN(n->bar.cc) &&
!NVME_CC_SHN(data) && !NVME_CC_SHN(n->bar.cc))
@@ -1084,42 +1082,42 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
if (NVME_CC_EN(data) && !NVME_CC_EN(n->bar.cc)) {
n->bar.cc = data;
if (unlikely(nvme_start_ctrl(n))) {
- trace_nvme_err_startfail();
+ trace_pci_nvme_err_startfail();
n->bar.csts = NVME_CSTS_FAILED;
} else {
- trace_nvme_mmio_start_success();
+ trace_pci_nvme_mmio_start_success();
n->bar.csts = NVME_CSTS_READY;
}
} else if (!NVME_CC_EN(data) && NVME_CC_EN(n->bar.cc)) {
- trace_nvme_mmio_stopped();
+ trace_pci_nvme_mmio_stopped();
nvme_clear_ctrl(n);
n->bar.csts &= ~NVME_CSTS_READY;
}
if (NVME_CC_SHN(data) && !(NVME_CC_SHN(n->bar.cc))) {
- trace_nvme_mmio_shutdown_set();
+ trace_pci_nvme_mmio_shutdown_set();
nvme_clear_ctrl(n);
n->bar.cc = data;
n->bar.csts |= NVME_CSTS_SHST_COMPLETE;
} else if (!NVME_CC_SHN(data) && NVME_CC_SHN(n->bar.cc)) {
- trace_nvme_mmio_shutdown_cleared();
+ trace_pci_nvme_mmio_shutdown_cleared();
n->bar.csts &= ~NVME_CSTS_SHST_COMPLETE;
n->bar.cc = data;
}
break;
case 0x1C: /* CSTS */
if (data & (1 << 4)) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_ssreset_w1c_unsupported,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_ssreset_w1c_unsupported,
"attempted to W1C CSTS.NSSRO"
" but CAP.NSSRS is zero (not supported)");
} else if (data != 0) {
- NVME_GUEST_ERR(nvme_ub_mmiowr_ro_csts,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_ro_csts,
"attempted to set a read only bit"
" of controller status");
}
break;
case 0x20: /* NSSR */
if (data == 0x4E564D65) {
- trace_nvme_ub_mmiowr_ssreset_unsupported();
+ trace_pci_nvme_ub_mmiowr_ssreset_unsupported();
} else {
/* The spec says that writes of other values have no effect */
return;
@@ -1127,55 +1125,55 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
break;
case 0x24: /* AQA */
n->bar.aqa = data & 0xffffffff;
- trace_nvme_mmio_aqattr(data & 0xffffffff);
+ trace_pci_nvme_mmio_aqattr(data & 0xffffffff);
break;
case 0x28: /* ASQ */
n->bar.asq = data;
- trace_nvme_mmio_asqaddr(data);
+ trace_pci_nvme_mmio_asqaddr(data);
break;
case 0x2c: /* ASQ hi */
n->bar.asq |= data << 32;
- trace_nvme_mmio_asqaddr_hi(data, n->bar.asq);
+ trace_pci_nvme_mmio_asqaddr_hi(data, n->bar.asq);
break;
case 0x30: /* ACQ */
- trace_nvme_mmio_acqaddr(data);
+ trace_pci_nvme_mmio_acqaddr(data);
n->bar.acq = data;
break;
case 0x34: /* ACQ hi */
n->bar.acq |= data << 32;
- trace_nvme_mmio_acqaddr_hi(data, n->bar.acq);
+ trace_pci_nvme_mmio_acqaddr_hi(data, n->bar.acq);
break;
case 0x38: /* CMBLOC */
- NVME_GUEST_ERR(nvme_ub_mmiowr_cmbloc_reserved,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_cmbloc_reserved,
"invalid write to reserved CMBLOC"
" when CMBSZ is zero, ignored");
return;
case 0x3C: /* CMBSZ */
- NVME_GUEST_ERR(nvme_ub_mmiowr_cmbsz_readonly,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_cmbsz_readonly,
"invalid write to read only CMBSZ, ignored");
return;
case 0xE00: /* PMRCAP */
- NVME_GUEST_ERR(nvme_ub_mmiowr_pmrcap_readonly,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_pmrcap_readonly,
"invalid write to PMRCAP register, ignored");
return;
case 0xE04: /* TODO PMRCTL */
break;
case 0xE08: /* PMRSTS */
- NVME_GUEST_ERR(nvme_ub_mmiowr_pmrsts_readonly,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_pmrsts_readonly,
"invalid write to PMRSTS register, ignored");
return;
case 0xE0C: /* PMREBS */
- NVME_GUEST_ERR(nvme_ub_mmiowr_pmrebs_readonly,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_pmrebs_readonly,
"invalid write to PMREBS register, ignored");
return;
case 0xE10: /* PMRSWTP */
- NVME_GUEST_ERR(nvme_ub_mmiowr_pmrswtp_readonly,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_pmrswtp_readonly,
"invalid write to PMRSWTP register, ignored");
return;
case 0xE14: /* TODO PMRMSC */
break;
default:
- NVME_GUEST_ERR(nvme_ub_mmiowr_invalid,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiowr_invalid,
"invalid MMIO write,"
" offset=0x%"PRIx64", data=%"PRIx64"",
offset, data);
@@ -1190,12 +1188,12 @@ static uint64_t nvme_mmio_read(void *opaque, hwaddr addr, unsigned size)
uint64_t val = 0;
if (unlikely(addr & (sizeof(uint32_t) - 1))) {
- NVME_GUEST_ERR(nvme_ub_mmiord_misaligned32,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiord_misaligned32,
"MMIO read not 32-bit aligned,"
" offset=0x%"PRIx64"", addr);
/* should RAZ, fall through for now */
} else if (unlikely(size < sizeof(uint32_t))) {
- NVME_GUEST_ERR(nvme_ub_mmiord_toosmall,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiord_toosmall,
"MMIO read smaller than 32-bits,"
" offset=0x%"PRIx64"", addr);
/* should RAZ, fall through for now */
@@ -1213,7 +1211,7 @@ static uint64_t nvme_mmio_read(void *opaque, hwaddr addr, unsigned size)
}
memcpy(&val, ptr + addr, size);
} else {
- NVME_GUEST_ERR(nvme_ub_mmiord_invalid_ofs,
+ NVME_GUEST_ERR(pci_nvme_ub_mmiord_invalid_ofs,
"MMIO read beyond last register,"
" offset=0x%"PRIx64", returning 0", addr);
}
@@ -1226,7 +1224,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
uint32_t qid;
if (unlikely(addr & ((1 << 2) - 1))) {
- NVME_GUEST_ERR(nvme_ub_db_wr_misaligned,
+ NVME_GUEST_ERR(pci_nvme_ub_db_wr_misaligned,
"doorbell write not 32-bit aligned,"
" offset=0x%"PRIx64", ignoring", addr);
return;
@@ -1241,7 +1239,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
qid = (addr - (0x1000 + (1 << 2))) >> 3;
if (unlikely(nvme_check_cqid(n, qid))) {
- NVME_GUEST_ERR(nvme_ub_db_wr_invalid_cq,
+ NVME_GUEST_ERR(pci_nvme_ub_db_wr_invalid_cq,
"completion queue doorbell write"
" for nonexistent queue,"
" sqid=%"PRIu32", ignoring", qid);
@@ -1250,7 +1248,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
cq = n->cq[qid];
if (unlikely(new_head >= cq->size)) {
- NVME_GUEST_ERR(nvme_ub_db_wr_invalid_cqhead,
+ NVME_GUEST_ERR(pci_nvme_ub_db_wr_invalid_cqhead,
"completion queue doorbell write value"
" beyond queue size, sqid=%"PRIu32","
" new_head=%"PRIu16", ignoring",
@@ -1279,7 +1277,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
qid = (addr - 0x1000) >> 3;
if (unlikely(nvme_check_sqid(n, qid))) {
- NVME_GUEST_ERR(nvme_ub_db_wr_invalid_sq,
+ NVME_GUEST_ERR(pci_nvme_ub_db_wr_invalid_sq,
"submission queue doorbell write"
" for nonexistent queue,"
" sqid=%"PRIu32", ignoring", qid);
@@ -1288,7 +1286,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val)
sq = n->sq[qid];
if (unlikely(new_tail >= sq->size)) {
- NVME_GUEST_ERR(nvme_ub_db_wr_invalid_sqtail,
+ NVME_GUEST_ERR(pci_nvme_ub_db_wr_invalid_sqtail,
"submission queue doorbell write value"
" beyond queue size, sqid=%"PRIu32","
" new_tail=%"PRIu16", ignoring",
diff --git a/hw/block/trace-events b/hw/block/trace-events
index aca54bda14..958fcc5508 100644
--- a/hw/block/trace-events
+++ b/hw/block/trace-events
@@ -29,100 +29,100 @@ hd_geometry_guess(void *blk, uint32_t cyls, uint32_t heads, uint32_t secs, int t
# nvme.c
# nvme traces for successful events
-nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u"
-nvme_irq_pin(void) "pulsing IRQ pin"
-nvme_irq_masked(void) "IRQ is masked"
-nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64""
-nvme_rw(const char *verb, uint32_t blk_count, uint64_t byte_count, uint64_t lba) "%s %"PRIu32" blocks (%"PRIu64" bytes) from LBA %"PRIu64""
-nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
-nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
-nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
-nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16""
-nvme_identify_ctrl(void) "identify controller"
-nvme_identify_ns(uint16_t ns) "identify namespace, nsid=%"PRIu16""
-nvme_identify_nslist(uint16_t ns) "identify namespace list, nsid=%"PRIu16""
-nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s"
-nvme_getfeat_numq(int result) "get feature number of queues, result=%d"
-nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d"
-nvme_setfeat_timestamp(uint64_t ts) "set feature timestamp = 0x%"PRIx64""
-nvme_getfeat_timestamp(uint64_t ts) "get feature timestamp = 0x%"PRIx64""
-nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64""
-nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64""
-nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64""
-nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64""
-nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64""
-nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64""
-nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
-nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
-nvme_mmio_start_success(void) "setting controller enable bit succeeded"
-nvme_mmio_stopped(void) "cleared controller enable bit"
-nvme_mmio_shutdown_set(void) "shutdown bit set"
-nvme_mmio_shutdown_cleared(void) "shutdown bit cleared"
+pci_nvme_irq_msix(uint32_t vector) "raising MSI-X IRQ vector %u"
+pci_nvme_irq_pin(void) "pulsing IRQ pin"
+pci_nvme_irq_masked(void) "IRQ is masked"
+pci_nvme_dma_read(uint64_t prp1, uint64_t prp2) "DMA read, prp1=0x%"PRIx64" prp2=0x%"PRIx64""
+pci_nvme_rw(const char *verb, uint32_t blk_count, uint64_t byte_count, uint64_t lba) "%s %"PRIu32" blocks (%"PRIu64" bytes) from LBA %"PRIu64""
+pci_nvme_create_sq(uint64_t addr, uint16_t sqid, uint16_t cqid, uint16_t qsize, uint16_t qflags) "create submission queue, addr=0x%"PRIx64", sqid=%"PRIu16", cqid=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16""
+pci_nvme_create_cq(uint64_t addr, uint16_t cqid, uint16_t vector, uint16_t size, uint16_t qflags, int ien) "create completion queue, addr=0x%"PRIx64", cqid=%"PRIu16", vector=%"PRIu16", qsize=%"PRIu16", qflags=%"PRIu16", ien=%d"
+pci_nvme_del_sq(uint16_t qid) "deleting submission queue sqid=%"PRIu16""
+pci_nvme_del_cq(uint16_t cqid) "deleted completion queue, cqid=%"PRIu16""
+pci_nvme_identify_ctrl(void) "identify controller"
+pci_nvme_identify_ns(uint16_t ns) "identify namespace, nsid=%"PRIu16""
+pci_nvme_identify_nslist(uint16_t ns) "identify namespace list, nsid=%"PRIu16""
+pci_nvme_getfeat_vwcache(const char* result) "get feature volatile write cache, result=%s"
+pci_nvme_getfeat_numq(int result) "get feature number of queues, result=%d"
+pci_nvme_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq) "requested cq_count=%d sq_count=%d, responding with cq_count=%d sq_count=%d"
+pci_nvme_setfeat_timestamp(uint64_t ts) "set feature timestamp = 0x%"PRIx64""
+pci_nvme_getfeat_timestamp(uint64_t ts) "get feature timestamp = 0x%"PRIx64""
+pci_nvme_mmio_intm_set(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask set, data=0x%"PRIx64", new_mask=0x%"PRIx64""
+pci_nvme_mmio_intm_clr(uint64_t data, uint64_t new_mask) "wrote MMIO, interrupt mask clr, data=0x%"PRIx64", new_mask=0x%"PRIx64""
+pci_nvme_mmio_cfg(uint64_t data) "wrote MMIO, config controller config=0x%"PRIx64""
+pci_nvme_mmio_aqattr(uint64_t data) "wrote MMIO, admin queue attributes=0x%"PRIx64""
+pci_nvme_mmio_asqaddr(uint64_t data) "wrote MMIO, admin submission queue address=0x%"PRIx64""
+pci_nvme_mmio_acqaddr(uint64_t data) "wrote MMIO, admin completion queue address=0x%"PRIx64""
+pci_nvme_mmio_asqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin submission queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
+pci_nvme_mmio_acqaddr_hi(uint64_t data, uint64_t new_addr) "wrote MMIO, admin completion queue high half=0x%"PRIx64", new_address=0x%"PRIx64""
+pci_nvme_mmio_start_success(void) "setting controller enable bit succeeded"
+pci_nvme_mmio_stopped(void) "cleared controller enable bit"
+pci_nvme_mmio_shutdown_set(void) "shutdown bit set"
+pci_nvme_mmio_shutdown_cleared(void) "shutdown bit cleared"
# nvme traces for error conditions
-nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size"
-nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is null or not page aligned: 0x%"PRIx64""
-nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64""
-nvme_err_invalid_prp2_missing(void) "PRP2 is null and more data to be transferred"
-nvme_err_invalid_prp(void) "invalid PRP"
-nvme_err_invalid_ns(uint32_t ns, uint32_t limit) "invalid namespace %u not within 1-%u"
-nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8""
-nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8""
-nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64""
-nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16""
-nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16""
-nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16""
-nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16""
-nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64""
-nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16""
-nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16""
-nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16""
-nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16""
-nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16""
-nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64""
-nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16""
-nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16""
-nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16""
-nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32""
-nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32""
-nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues"
-nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues"
-nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
-nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null"
-nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64""
-nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64""
-nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u"
-nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u"
-nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u"
-nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u"
-nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u"
-nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u"
-nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero"
-nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
-nvme_err_startfail(void) "setting controller enable bit failed"
+pci_nvme_err_invalid_dma(void) "PRP/SGL is too small for transfer size"
+pci_nvme_err_invalid_prplist_ent(uint64_t prplist) "PRP list entry is null or not page aligned: 0x%"PRIx64""
+pci_nvme_err_invalid_prp2_align(uint64_t prp2) "PRP2 is not page aligned: 0x%"PRIx64""
+pci_nvme_err_invalid_prp2_missing(void) "PRP2 is null and more data to be transferred"
+pci_nvme_err_invalid_prp(void) "invalid PRP"
+pci_nvme_err_invalid_ns(uint32_t ns, uint32_t limit) "invalid namespace %u not within 1-%u"
+pci_nvme_err_invalid_opc(uint8_t opc) "invalid opcode 0x%"PRIx8""
+pci_nvme_err_invalid_admin_opc(uint8_t opc) "invalid admin opcode 0x%"PRIx8""
+pci_nvme_err_invalid_lba_range(uint64_t start, uint64_t len, uint64_t limit) "Invalid LBA start=%"PRIu64" len=%"PRIu64" limit=%"PRIu64""
+pci_nvme_err_invalid_del_sq(uint16_t qid) "invalid submission queue deletion, sid=%"PRIu16""
+pci_nvme_err_invalid_create_sq_cqid(uint16_t cqid) "failed creating submission queue, invalid cqid=%"PRIu16""
+pci_nvme_err_invalid_create_sq_sqid(uint16_t sqid) "failed creating submission queue, invalid sqid=%"PRIu16""
+pci_nvme_err_invalid_create_sq_size(uint16_t qsize) "failed creating submission queue, invalid qsize=%"PRIu16""
+pci_nvme_err_invalid_create_sq_addr(uint64_t addr) "failed creating submission queue, addr=0x%"PRIx64""
+pci_nvme_err_invalid_create_sq_qflags(uint16_t qflags) "failed creating submission queue, qflags=%"PRIu16""
+pci_nvme_err_invalid_del_cq_cqid(uint16_t cqid) "failed deleting completion queue, cqid=%"PRIu16""
+pci_nvme_err_invalid_del_cq_notempty(uint16_t cqid) "failed deleting completion queue, it is not empty, cqid=%"PRIu16""
+pci_nvme_err_invalid_create_cq_cqid(uint16_t cqid) "failed creating completion queue, cqid=%"PRIu16""
+pci_nvme_err_invalid_create_cq_size(uint16_t size) "failed creating completion queue, size=%"PRIu16""
+pci_nvme_err_invalid_create_cq_addr(uint64_t addr) "failed creating completion queue, addr=0x%"PRIx64""
+pci_nvme_err_invalid_create_cq_vector(uint16_t vector) "failed creating completion queue, vector=%"PRIu16""
+pci_nvme_err_invalid_create_cq_qflags(uint16_t qflags) "failed creating completion queue, qflags=%"PRIu16""
+pci_nvme_err_invalid_identify_cns(uint16_t cns) "identify, invalid cns=0x%"PRIx16""
+pci_nvme_err_invalid_getfeat(int dw10) "invalid get features, dw10=0x%"PRIx32""
+pci_nvme_err_invalid_setfeat(uint32_t dw10) "invalid set features, dw10=0x%"PRIx32""
+pci_nvme_err_startfail_cq(void) "nvme_start_ctrl failed because there are non-admin completion queues"
+pci_nvme_err_startfail_sq(void) "nvme_start_ctrl failed because there are non-admin submission queues"
+pci_nvme_err_startfail_nbarasq(void) "nvme_start_ctrl failed because the admin submission queue address is null"
+pci_nvme_err_startfail_nbaracq(void) "nvme_start_ctrl failed because the admin completion queue address is null"
+pci_nvme_err_startfail_asq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin submission queue address is misaligned: 0x%"PRIx64""
+pci_nvme_err_startfail_acq_misaligned(uint64_t addr) "nvme_start_ctrl failed because the admin completion queue address is misaligned: 0x%"PRIx64""
+pci_nvme_err_startfail_page_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too small: log2size=%u, min=%u"
+pci_nvme_err_startfail_page_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the page size is too large: log2size=%u, max=%u"
+pci_nvme_err_startfail_cqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too small: log2size=%u, min=%u"
+pci_nvme_err_startfail_cqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the completion queue entry size is too large: log2size=%u, max=%u"
+pci_nvme_err_startfail_sqent_too_small(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too small: log2size=%u, min=%u"
+pci_nvme_err_startfail_sqent_too_large(uint8_t log2ps, uint8_t maxlog2ps) "nvme_start_ctrl failed because the submission queue entry size is too large: log2size=%u, max=%u"
+pci_nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the admin submission queue size is zero"
+pci_nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
+pci_nvme_err_startfail(void) "setting controller enable bit failed"
# Traces for undefined behavior
-nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
-nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u"
-nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled"
-nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status"
-nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)"
-nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)"
-nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored"
-nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored"
-nvme_ub_mmiowr_pmrcap_readonly(void) "invalid write to read only PMRCAP, ignored"
-nvme_ub_mmiowr_pmrsts_readonly(void) "invalid write to read only PMRSTS, ignored"
-nvme_ub_mmiowr_pmrebs_readonly(void) "invalid write to read only PMREBS, ignored"
-nvme_ub_mmiowr_pmrswtp_readonly(void) "invalid write to read only PMRSWTP, ignored"
-nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64""
-nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64""
-nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64""
-nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0"
-nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring"
-nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring"
-nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring"
-nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring"
-nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring"
+pci_nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
+pci_nvme_ub_mmiowr_toosmall(uint64_t offset, unsigned size) "MMIO write smaller than 32 bits, offset=0x%"PRIx64", size=%u"
+pci_nvme_ub_mmiowr_intmask_with_msix(void) "undefined access to interrupt mask set when MSI-X is enabled"
+pci_nvme_ub_mmiowr_ro_csts(void) "attempted to set a read only bit of controller status"
+pci_nvme_ub_mmiowr_ssreset_w1c_unsupported(void) "attempted to W1C CSTS.NSSRO but CAP.NSSRS is zero (not supported)"
+pci_nvme_ub_mmiowr_ssreset_unsupported(void) "attempted NVM subsystem reset but CAP.NSSRS is zero (not supported)"
+pci_nvme_ub_mmiowr_cmbloc_reserved(void) "invalid write to reserved CMBLOC when CMBSZ is zero, ignored"
+pci_nvme_ub_mmiowr_cmbsz_readonly(void) "invalid write to read only CMBSZ, ignored"
+pci_nvme_ub_mmiowr_pmrcap_readonly(void) "invalid write to read only PMRCAP, ignored"
+pci_nvme_ub_mmiowr_pmrsts_readonly(void) "invalid write to read only PMRSTS, ignored"
+pci_nvme_ub_mmiowr_pmrebs_readonly(void) "invalid write to read only PMREBS, ignored"
+pci_nvme_ub_mmiowr_pmrswtp_readonly(void) "invalid write to read only PMRSWTP, ignored"
+pci_nvme_ub_mmiowr_invalid(uint64_t offset, uint64_t data) "invalid MMIO write, offset=0x%"PRIx64", data=0x%"PRIx64""
+pci_nvme_ub_mmiord_misaligned32(uint64_t offset) "MMIO read not 32-bit aligned, offset=0x%"PRIx64""
+pci_nvme_ub_mmiord_toosmall(uint64_t offset) "MMIO read smaller than 32-bits, offset=0x%"PRIx64""
+pci_nvme_ub_mmiord_invalid_ofs(uint64_t offset) "MMIO read beyond last register, offset=0x%"PRIx64", returning 0"
+pci_nvme_ub_db_wr_misaligned(uint64_t offset) "doorbell write not 32-bit aligned, offset=0x%"PRIx64", ignoring"
+pci_nvme_ub_db_wr_invalid_cq(uint32_t qid) "completion queue doorbell write for nonexistent queue, cqid=%"PRIu32", ignoring"
+pci_nvme_ub_db_wr_invalid_cqhead(uint32_t qid, uint16_t new_head) "completion queue doorbell write value beyond queue size, cqid=%"PRIu32", new_head=%"PRIu16", ignoring"
+pci_nvme_ub_db_wr_invalid_sq(uint32_t qid) "submission queue doorbell write for nonexistent queue, sqid=%"PRIu32", ignoring"
+pci_nvme_ub_db_wr_invalid_sqtail(uint32_t qid, uint16_t new_tail) "submission queue doorbell write value beyond queue size, sqid=%"PRIu32", new_head=%"PRIu16", ignoring"
# xen-block.c
xen_block_realize(const char *type, uint32_t disk, uint32_t partition) "%s d%up%u"
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 09/43] hw/block/nvme: remove superfluous breaks
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (7 preceding siblings ...)
2020-06-17 14:48 ` [PULL 08/43] hw/block/nvme: rename trace events to pci_nvme Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 10/43] hw/block/nvme: move device parameters to separate struct Kevin Wolf
` (35 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
These break statements was left over when commit 3036a626e9ef ("nvme:
add Get/Set Feature Timestamp support") was merged.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-4-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index e8f5c5ab82..0d3f8f345f 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -801,7 +801,6 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
break;
case NVME_TIMESTAMP:
return nvme_get_feature_timestamp(n, cmd);
- break;
default:
trace_pci_nvme_err_invalid_getfeat(dw10);
return NVME_INVALID_FIELD | NVME_DNR;
@@ -845,11 +844,8 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
req->cqe.result =
cpu_to_le32((n->num_queues - 2) | ((n->num_queues - 2) << 16));
break;
-
case NVME_TIMESTAMP:
return nvme_set_feature_timestamp(n, cmd);
- break;
-
default:
trace_pci_nvme_err_invalid_setfeat(dw10);
return NVME_INVALID_FIELD | NVME_DNR;
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 10/43] hw/block/nvme: move device parameters to separate struct
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (8 preceding siblings ...)
2020-06-17 14:48 ` [PULL 09/43] hw/block/nvme: remove superfluous breaks Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 11/43] hw/block/nvme: use constants in identify Kevin Wolf
` (34 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Move device configuration parameters to separate struct to make it
explicit what is configurable and what is set internally.
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200609190333.59390-5-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 11 ++++++++---
hw/block/nvme.c | 49 ++++++++++++++++++++++++++-----------------------
2 files changed, 34 insertions(+), 26 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 6520a9f0be..9df244c93c 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -1,7 +1,14 @@
#ifndef HW_NVME_H
#define HW_NVME_H
+
#include "block/nvme.h"
+typedef struct NvmeParams {
+ char *serial;
+ uint32_t num_queues;
+ uint32_t cmb_size_mb;
+} NvmeParams;
+
typedef struct NvmeAsyncEvent {
QSIMPLEQ_ENTRY(NvmeAsyncEvent) entry;
NvmeAerResult result;
@@ -63,6 +70,7 @@ typedef struct NvmeCtrl {
MemoryRegion ctrl_mem;
NvmeBar bar;
BlockConf conf;
+ NvmeParams params;
uint32_t page_size;
uint16_t page_bits;
@@ -71,10 +79,8 @@ typedef struct NvmeCtrl {
uint16_t sqe_size;
uint32_t reg_size;
uint32_t num_namespaces;
- uint32_t num_queues;
uint32_t max_q_ents;
uint64_t ns_size;
- uint32_t cmb_size_mb;
uint32_t cmbsz;
uint32_t cmbloc;
uint8_t *cmbuf;
@@ -82,7 +88,6 @@ typedef struct NvmeCtrl {
uint64_t host_timestamp; /* Timestamp sent by the host */
uint64_t timestamp_set_qemu_clock_ms; /* QEMU clock time */
- char *serial;
HostMemoryBackend *pmrdev;
NvmeNamespace *namespaces;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 0d3f8f345f..bc2d9d2091 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -77,12 +77,12 @@ static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void *buf, int size)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->num_queues && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->params.num_queues && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->num_queues && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->params.num_queues && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -644,7 +644,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_addr(prp1);
return NVME_INVALID_FIELD | NVME_DNR;
}
- if (unlikely(vector > n->num_queues)) {
+ if (unlikely(vector > n->params.num_queues)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -796,7 +796,8 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
trace_pci_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
break;
case NVME_NUMBER_OF_QUEUES:
- result = cpu_to_le32((n->num_queues - 2) | ((n->num_queues - 2) << 16));
+ result = cpu_to_le32((n->params.num_queues - 2) |
+ ((n->params.num_queues - 2) << 16));
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_TIMESTAMP:
@@ -840,9 +841,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
case NVME_NUMBER_OF_QUEUES:
trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
((dw11 >> 16) & 0xFFFF) + 1,
- n->num_queues - 1, n->num_queues - 1);
- req->cqe.result =
- cpu_to_le32((n->num_queues - 2) | ((n->num_queues - 2) << 16));
+ n->params.num_queues - 1,
+ n->params.num_queues - 1);
+ req->cqe.result = cpu_to_le32((n->params.num_queues - 2) |
+ ((n->params.num_queues - 2) << 16));
break;
case NVME_TIMESTAMP:
return nvme_set_feature_timestamp(n, cmd);
@@ -913,12 +915,12 @@ static void nvme_clear_ctrl(NvmeCtrl *n)
blk_drain(n->conf.blk);
- for (i = 0; i < n->num_queues; i++) {
+ for (i = 0; i < n->params.num_queues; i++) {
if (n->sq[i] != NULL) {
nvme_free_sq(n->sq[i], n);
}
}
- for (i = 0; i < n->num_queues; i++) {
+ for (i = 0; i < n->params.num_queues; i++) {
if (n->cq[i] != NULL) {
nvme_free_cq(n->cq[i], n);
}
@@ -1348,7 +1350,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
int64_t bs_size;
uint8_t *pci_conf;
- if (!n->num_queues) {
+ if (!n->params.num_queues) {
error_setg(errp, "num_queues can't be zero");
return;
}
@@ -1364,12 +1366,12 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
- if (!n->serial) {
+ if (!n->params.serial) {
error_setg(errp, "serial property not set");
return;
}
- if (!n->cmb_size_mb && n->pmrdev) {
+ if (!n->params.cmb_size_mb && n->pmrdev) {
if (host_memory_backend_is_mapped(n->pmrdev)) {
char *path = object_get_canonical_path_component(OBJECT(n->pmrdev));
error_setg(errp, "can't use already busy memdev: %s", path);
@@ -1400,25 +1402,26 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->num_namespaces = 1;
/* num_queues is really number of pairs, so each has two doorbells */
- n->reg_size = pow2ceil(NVME_REG_SIZE + 2 * n->num_queues * NVME_DB_SIZE);
+ n->reg_size = pow2ceil(NVME_REG_SIZE +
+ 2 * n->params.num_queues * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
- n->sq = g_new0(NvmeSQueue *, n->num_queues);
- n->cq = g_new0(NvmeCQueue *, n->num_queues);
+ n->sq = g_new0(NvmeSQueue *, n->params.num_queues);
+ n->cq = g_new0(NvmeCQueue *, n->params.num_queues);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
&n->iomem);
- msix_init_exclusive_bar(pci_dev, n->num_queues, 4, NULL);
+ msix_init_exclusive_bar(pci_dev, n->params.num_queues, 4, NULL);
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
strpadcpy((char *)id->mn, sizeof(id->mn), "QEMU NVMe Ctrl", ' ');
strpadcpy((char *)id->fr, sizeof(id->fr), "1.0", ' ');
- strpadcpy((char *)id->sn, sizeof(id->sn), n->serial, ' ');
+ strpadcpy((char *)id->sn, sizeof(id->sn), n->params.serial, ' ');
id->rab = 6;
id->ieee[0] = 0x00;
id->ieee[1] = 0x02;
@@ -1447,7 +1450,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->bar.vs = 0x00010200;
n->bar.intmc = n->bar.intms = 0;
- if (n->cmb_size_mb) {
+ if (n->params.cmb_size_mb) {
NVME_CMBLOC_SET_BIR(n->bar.cmbloc, 2);
NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
@@ -1458,7 +1461,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
- NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->cmb_size_mb);
+ NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
n->cmbloc = n->bar.cmbloc;
n->cmbsz = n->bar.cmbsz;
@@ -1542,7 +1545,7 @@ static void nvme_exit(PCIDevice *pci_dev)
g_free(n->cq);
g_free(n->sq);
- if (n->cmb_size_mb) {
+ if (n->params.cmb_size_mb) {
g_free(n->cmbuf);
}
@@ -1556,9 +1559,9 @@ static Property nvme_props[] = {
DEFINE_BLOCK_PROPERTIES(NvmeCtrl, conf),
DEFINE_PROP_LINK("pmrdev", NvmeCtrl, pmrdev, TYPE_MEMORY_BACKEND,
HostMemoryBackend *),
- DEFINE_PROP_STRING("serial", NvmeCtrl, serial),
- DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, cmb_size_mb, 0),
- DEFINE_PROP_UINT32("num_queues", NvmeCtrl, num_queues, 64),
+ DEFINE_PROP_STRING("serial", NvmeCtrl, params.serial),
+ DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, params.cmb_size_mb, 0),
+ DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 64),
DEFINE_PROP_END_OF_LIST(),
};
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 11/43] hw/block/nvme: use constants in identify
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (9 preceding siblings ...)
2020-06-17 14:48 ` [PULL 10/43] hw/block/nvme: move device parameters to separate struct Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 12/43] hw/block/nvme: refactor nvme_addr_read Kevin Wolf
` (33 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-6-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/nvme.h | 8 ++++++++
hw/block/nvme.c | 8 ++++----
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/include/block/nvme.h b/include/block/nvme.h
index 5525c8e343..1720ee1d51 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -705,6 +705,14 @@ typedef struct NvmePSD {
uint8_t resv[16];
} NvmePSD;
+#define NVME_IDENTIFY_DATA_SIZE 4096
+
+enum {
+ NVME_ID_CNS_NS = 0x0,
+ NVME_ID_CNS_CTRL = 0x1,
+ NVME_ID_CNS_NS_ACTIVE_LIST = 0x2,
+};
+
typedef struct NvmeIdCtrl {
uint16_t vid;
uint16_t ssvid;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index bc2d9d2091..2a26b8859a 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -692,7 +692,7 @@ static uint16_t nvme_identify_ns(NvmeCtrl *n, NvmeIdentify *c)
static uint16_t nvme_identify_nslist(NvmeCtrl *n, NvmeIdentify *c)
{
- static const int data_len = 4 * KiB;
+ static const int data_len = NVME_IDENTIFY_DATA_SIZE;
uint32_t min_nsid = le32_to_cpu(c->nsid);
uint64_t prp1 = le64_to_cpu(c->prp1);
uint64_t prp2 = le64_to_cpu(c->prp2);
@@ -722,11 +722,11 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeCmd *cmd)
NvmeIdentify *c = (NvmeIdentify *)cmd;
switch (le32_to_cpu(c->cns)) {
- case 0x00:
+ case NVME_ID_CNS_NS:
return nvme_identify_ns(n, c);
- case 0x01:
+ case NVME_ID_CNS_CTRL:
return nvme_identify_ctrl(n, c);
- case 0x02:
+ case NVME_ID_CNS_NS_ACTIVE_LIST:
return nvme_identify_nslist(n, c);
default:
trace_pci_nvme_err_invalid_identify_cns(le32_to_cpu(c->cns));
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 12/43] hw/block/nvme: refactor nvme_addr_read
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (10 preceding siblings ...)
2020-06-17 14:48 ` [PULL 11/43] hw/block/nvme: use constants in identify Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior Kevin Wolf
` (32 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Pull the controller memory buffer check to its own function. The check
will be used on its own in later patches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-7-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 2a26b8859a..d6fcf078a4 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -65,14 +65,22 @@
static void nvme_process_sq(void *opaque);
+static bool nvme_addr_is_cmb(NvmeCtrl *n, hwaddr addr)
+{
+ hwaddr low = n->ctrl_mem.addr;
+ hwaddr hi = n->ctrl_mem.addr + int128_get64(n->ctrl_mem.size);
+
+ return addr >= low && addr < hi;
+}
+
static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void *buf, int size)
{
- if (n->cmbsz && addr >= n->ctrl_mem.addr &&
- addr < (n->ctrl_mem.addr + int128_get64(n->ctrl_mem.size))) {
+ if (n->cmbsz && nvme_addr_is_cmb(n, addr)) {
memcpy(buf, (void *)&n->cmbuf[addr - n->ctrl_mem.addr], size);
- } else {
- pci_dma_read(&n->parent_obj, addr, buf, size);
+ return;
}
+
+ pci_dma_read(&n->parent_obj, addr, buf, size);
}
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (11 preceding siblings ...)
2020-06-17 14:48 ` [PULL 12/43] hw/block/nvme: refactor nvme_addr_read Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter Kevin Wolf
` (31 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
First, since the device only supports MSI-X or pin-based interrupt, if
MSI-X is not enabled, it should not accept interrupt vectors different
from 0 when creating completion queues.
Secondly, the irq_status NvmeCtrl member is meant to be compared to the
INTMS register, so it should only be 32 bits wide. And it is really only
useful when used with multi-message MSI.
Third, since we do not force a 1-to-1 correspondence between cqid and
interrupt vector, the irq_status register should not have bits set
according to cqid, but according to the associated interrupt vector.
Fix these issues, but keep irq_status available so we can easily support
multi-message MSI down the line.
Fixes: 5e9aa92eb1a5 ("hw/block: Fix pin-based interrupt behaviour of NVMe")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-8-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 2 +-
hw/block/nvme.c | 12 ++++++++----
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 9df244c93c..91f16c8125 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -84,7 +84,7 @@ typedef struct NvmeCtrl {
uint32_t cmbsz;
uint32_t cmbloc;
uint8_t *cmbuf;
- uint64_t irq_status;
+ uint32_t irq_status;
uint64_t host_timestamp; /* Timestamp sent by the host */
uint64_t timestamp_set_qemu_clock_ms; /* QEMU clock time */
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index d6fcf078a4..ee514625ee 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -137,8 +137,8 @@ static void nvme_irq_assert(NvmeCtrl *n, NvmeCQueue *cq)
msix_notify(&(n->parent_obj), cq->vector);
} else {
trace_pci_nvme_irq_pin();
- assert(cq->cqid < 64);
- n->irq_status |= 1 << cq->cqid;
+ assert(cq->vector < 32);
+ n->irq_status |= 1 << cq->vector;
nvme_irq_check(n);
}
} else {
@@ -152,8 +152,8 @@ static void nvme_irq_deassert(NvmeCtrl *n, NvmeCQueue *cq)
if (msix_enabled(&(n->parent_obj))) {
return;
} else {
- assert(cq->cqid < 64);
- n->irq_status &= ~(1 << cq->cqid);
+ assert(cq->vector < 32);
+ n->irq_status &= ~(1 << cq->vector);
nvme_irq_check(n);
}
}
@@ -652,6 +652,10 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_addr(prp1);
return NVME_INVALID_FIELD | NVME_DNR;
}
+ if (unlikely(!msix_enabled(&n->parent_obj) && vector)) {
+ trace_pci_nvme_err_invalid_create_cq_vector(vector);
+ return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
+ }
if (unlikely(vector > n->params.num_queues)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (12 preceding siblings ...)
2020-06-17 14:48 ` [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members Kevin Wolf
` (30 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
The num_queues device paramater has a slightly confusing meaning because
it accounts for the admin queue pair which is not really optional.
Secondly, it is really a maximum value of queues allowed.
Add a new max_ioqpairs parameter that only accounts for I/O queue pairs,
but keep num_queues for compatibility.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-9-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 3 ++-
hw/block/nvme.c | 51 ++++++++++++++++++++++++++++++-------------------
2 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 91f16c8125..26c38bd913 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -5,7 +5,8 @@
typedef struct NvmeParams {
char *serial;
- uint32_t num_queues;
+ uint32_t num_queues; /* deprecated since 5.1 */
+ uint32_t max_ioqpairs;
uint32_t cmb_size_mb;
} NvmeParams;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index ee514625ee..1c1d2f8b77 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -20,7 +20,7 @@
* -device nvme,drive=<drive_id>,serial=<serial>,id=<id[optional]>, \
* cmb_size_mb=<cmb_size_mb[optional]>, \
* [pmrdev=<mem_backend_file_id>,] \
- * num_queues=<N[optional]>
+ * max_ioqpairs=<N[optional]>
*
* Note cmb_size_mb denotes size of CMB in MB. CMB is assumed to be at
* offset 0 in BAR2 and supports only WDS, RDS and SQS for now.
@@ -36,6 +36,7 @@
#include "qemu/osdep.h"
#include "qemu/units.h"
+#include "qemu/error-report.h"
#include "hw/block/block.h"
#include "hw/pci/msix.h"
#include "hw/pci/pci.h"
@@ -85,12 +86,12 @@ static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void *buf, int size)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->params.num_queues && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->params.num_queues && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -656,7 +657,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector > n->params.num_queues)) {
+ if (unlikely(vector > n->params.max_ioqpairs)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -808,8 +809,8 @@ static uint16_t nvme_get_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
trace_pci_nvme_getfeat_vwcache(result ? "enabled" : "disabled");
break;
case NVME_NUMBER_OF_QUEUES:
- result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_TIMESTAMP:
@@ -853,10 +854,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
case NVME_NUMBER_OF_QUEUES:
trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
((dw11 >> 16) & 0xFFFF) + 1,
- n->params.num_queues - 1,
- n->params.num_queues - 1);
- req->cqe.result = cpu_to_le32((n->params.num_queues - 2) |
- ((n->params.num_queues - 2) << 16));
+ n->params.max_ioqpairs,
+ n->params.max_ioqpairs);
+ req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
+ ((n->params.max_ioqpairs - 1) << 16));
break;
case NVME_TIMESTAMP:
return nvme_set_feature_timestamp(n, cmd);
@@ -927,12 +928,12 @@ static void nvme_clear_ctrl(NvmeCtrl *n)
blk_drain(n->conf.blk);
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->sq[i] != NULL) {
nvme_free_sq(n->sq[i], n);
}
}
- for (i = 0; i < n->params.num_queues; i++) {
+ for (i = 0; i < n->params.max_ioqpairs + 1; i++) {
if (n->cq[i] != NULL) {
nvme_free_cq(n->cq[i], n);
}
@@ -1362,8 +1363,17 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
int64_t bs_size;
uint8_t *pci_conf;
- if (!n->params.num_queues) {
- error_setg(errp, "num_queues can't be zero");
+ if (n->params.num_queues) {
+ warn_report("num_queues is deprecated; please use max_ioqpairs "
+ "instead");
+
+ n->params.max_ioqpairs = n->params.num_queues - 1;
+ }
+
+ if (n->params.max_ioqpairs < 1 ||
+ n->params.max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
+ error_setg(errp, "max_ioqpairs must be between 1 and %d",
+ PCI_MSIX_FLAGS_QSIZE);
return;
}
@@ -1413,21 +1423,21 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->num_namespaces = 1;
- /* num_queues is really number of pairs, so each has two doorbells */
+ /* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(NVME_REG_SIZE +
- 2 * n->params.num_queues * NVME_DB_SIZE);
+ 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
- n->sq = g_new0(NvmeSQueue *, n->params.num_queues);
- n->cq = g_new0(NvmeCQueue *, n->params.num_queues);
+ n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
+ n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
&n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.num_queues, 4, NULL);
+ msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -1573,7 +1583,8 @@ static Property nvme_props[] = {
HostMemoryBackend *),
DEFINE_PROP_STRING("serial", NvmeCtrl, params.serial),
DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, params.cmb_size_mb, 0),
- DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 64),
+ DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 0),
+ DEFINE_PROP_UINT32("max_ioqpairs", NvmeCtrl, params.max_ioqpairs, 64),
DEFINE_PROP_END_OF_LIST(),
};
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (13 preceding siblings ...)
2020-06-17 14:48 ` [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 16/43] hw/block/nvme: factor out property/constraint checks Kevin Wolf
` (29 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-10-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 2 --
hw/block/nvme.c | 7 ++-----
2 files changed, 2 insertions(+), 7 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 26c38bd913..cedc8022db 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -82,8 +82,6 @@ typedef struct NvmeCtrl {
uint32_t num_namespaces;
uint32_t max_q_ents;
uint64_t ns_size;
- uint32_t cmbsz;
- uint32_t cmbloc;
uint8_t *cmbuf;
uint32_t irq_status;
uint64_t host_timestamp; /* Timestamp sent by the host */
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 1c1d2f8b77..61447220a8 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -76,7 +76,7 @@ static bool nvme_addr_is_cmb(NvmeCtrl *n, hwaddr addr)
static void nvme_addr_read(NvmeCtrl *n, hwaddr addr, void *buf, int size)
{
- if (n->cmbsz && nvme_addr_is_cmb(n, addr)) {
+ if (n->bar.cmbsz && nvme_addr_is_cmb(n, addr)) {
memcpy(buf, (void *)&n->cmbuf[addr - n->ctrl_mem.addr], size);
return;
}
@@ -170,7 +170,7 @@ static uint16_t nvme_map_prp(QEMUSGList *qsg, QEMUIOVector *iov, uint64_t prp1,
if (unlikely(!prp1)) {
trace_pci_nvme_err_invalid_prp();
return NVME_INVALID_FIELD | NVME_DNR;
- } else if (n->cmbsz && prp1 >= n->ctrl_mem.addr &&
+ } else if (n->bar.cmbsz && prp1 >= n->ctrl_mem.addr &&
prp1 < n->ctrl_mem.addr + int128_get64(n->ctrl_mem.size)) {
qsg->nsg = 0;
qemu_iovec_init(iov, num_prps);
@@ -1485,9 +1485,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
- n->cmbloc = n->bar.cmbloc;
- n->cmbsz = n->bar.cmbsz;
-
n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
"nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 16/43] hw/block/nvme: factor out property/constraint checks
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (14 preceding siblings ...)
2020-06-17 14:48 ` [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 17/43] hw/block/nvme: factor out device state setup Kevin Wolf
` (28 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-11-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 48 ++++++++++++++++++++++++++++++------------------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 61447220a8..ee669ee8dc 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1354,24 +1354,19 @@ static const MemoryRegionOps nvme_cmb_ops = {
},
};
-static void nvme_realize(PCIDevice *pci_dev, Error **errp)
+static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
{
- NvmeCtrl *n = NVME(pci_dev);
- NvmeIdCtrl *id = &n->id_ctrl;
-
- int i;
- int64_t bs_size;
- uint8_t *pci_conf;
+ NvmeParams *params = &n->params;
- if (n->params.num_queues) {
+ if (params->num_queues) {
warn_report("num_queues is deprecated; please use max_ioqpairs "
"instead");
- n->params.max_ioqpairs = n->params.num_queues - 1;
+ params->max_ioqpairs = params->num_queues - 1;
}
- if (n->params.max_ioqpairs < 1 ||
- n->params.max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
+ if (params->max_ioqpairs < 1 ||
+ params->max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
error_setg(errp, "max_ioqpairs must be between 1 and %d",
PCI_MSIX_FLAGS_QSIZE);
return;
@@ -1382,13 +1377,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
- bs_size = blk_getlength(n->conf.blk);
- if (bs_size < 0) {
- error_setg(errp, "could not get backing file size");
- return;
- }
-
- if (!n->params.serial) {
+ if (!params->serial) {
error_setg(errp, "serial property not set");
return;
}
@@ -1408,6 +1397,29 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
host_memory_backend_set_mapped(n->pmrdev, true);
}
+}
+
+static void nvme_realize(PCIDevice *pci_dev, Error **errp)
+{
+ NvmeCtrl *n = NVME(pci_dev);
+ NvmeIdCtrl *id = &n->id_ctrl;
+ Error *local_err = NULL;
+
+ int i;
+ int64_t bs_size;
+ uint8_t *pci_conf;
+
+ nvme_check_constraints(n, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ bs_size = blk_getlength(n->conf.blk);
+ if (bs_size < 0) {
+ error_setg(errp, "could not get backing file size");
+ return;
+ }
blkconf_blocksizes(&n->conf);
if (!blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 17/43] hw/block/nvme: factor out device state setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (15 preceding siblings ...)
2020-06-17 14:48 ` [PULL 16/43] hw/block/nvme: factor out property/constraint checks Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 18/43] hw/block/nvme: factor out block backend setup Kevin Wolf
` (27 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-12-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index ee669ee8dc..b721cab9b0 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1399,6 +1399,17 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
}
}
+static void nvme_init_state(NvmeCtrl *n)
+{
+ n->num_namespaces = 1;
+ /* add one to max_ioqpairs to account for the admin queue pair */
+ n->reg_size = pow2ceil(NVME_REG_SIZE +
+ 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
+ n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
+ n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
+ n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
+}
+
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
{
NvmeCtrl *n = NVME(pci_dev);
@@ -1415,6 +1426,8 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
+ nvme_init_state(n);
+
bs_size = blk_getlength(n->conf.blk);
if (bs_size < 0) {
error_setg(errp, "could not get backing file size");
@@ -1433,17 +1446,8 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
pcie_endpoint_cap_init(pci_dev, 0x80);
- n->num_namespaces = 1;
-
- /* add one to max_ioqpairs to account for the admin queue pair */
- n->reg_size = pow2ceil(NVME_REG_SIZE +
- 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
n->ns_size = bs_size / (uint64_t)n->num_namespaces;
- n->namespaces = g_new0(NvmeNamespace, n->num_namespaces);
- n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
- n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
-
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 18/43] hw/block/nvme: factor out block backend setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (16 preceding siblings ...)
2020-06-17 14:48 ` [PULL 17/43] hw/block/nvme: factor out device state setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 19/43] hw/block/nvme: add namespace helpers Kevin Wolf
` (26 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-13-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index b721cab9b0..87f1f0d0d1 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1410,6 +1410,13 @@ static void nvme_init_state(NvmeCtrl *n)
n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
}
+static void nvme_init_blk(NvmeCtrl *n, Error **errp)
+{
+ blkconf_blocksizes(&n->conf);
+ blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
+ false, errp);
+}
+
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
{
NvmeCtrl *n = NVME(pci_dev);
@@ -1434,9 +1441,9 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
- blkconf_blocksizes(&n->conf);
- if (!blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
- false, errp)) {
+ nvme_init_blk(n, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
return;
}
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 19/43] hw/block/nvme: add namespace helpers
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (17 preceding siblings ...)
2020-06-17 14:48 ` [PULL 18/43] hw/block/nvme: factor out block backend setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 20/43] hw/block/nvme: factor out namespace setup Kevin Wolf
` (25 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Introduce some small helpers to make the next patches easier on the eye.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-14-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 17 +++++++++++++++++
hw/block/nvme.c | 3 +--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index cedc8022db..61dd9b23b8 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -61,6 +61,17 @@ typedef struct NvmeNamespace {
NvmeIdNs id_ns;
} NvmeNamespace;
+static inline NvmeLBAF *nvme_ns_lbaf(NvmeNamespace *ns)
+{
+ NvmeIdNs *id_ns = &ns->id_ns;
+ return &id_ns->lbaf[NVME_ID_NS_FLBAS_INDEX(id_ns->flbas)];
+}
+
+static inline uint8_t nvme_ns_lbads(NvmeNamespace *ns)
+{
+ return nvme_ns_lbaf(ns)->ds;
+}
+
#define TYPE_NVME "nvme"
#define NVME(obj) \
OBJECT_CHECK(NvmeCtrl, (obj), TYPE_NVME)
@@ -97,4 +108,10 @@ typedef struct NvmeCtrl {
NvmeIdCtrl id_ctrl;
} NvmeCtrl;
+/* calculate the number of LBAs that the namespace can accomodate */
+static inline uint64_t nvme_ns_nlbas(NvmeCtrl *n, NvmeNamespace *ns)
+{
+ return n->ns_size >> nvme_ns_lbads(ns);
+}
+
#endif /* HW_NVME_H */
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 87f1f0d0d1..3f3db17231 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1573,8 +1573,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
id_ns->dps = 0;
id_ns->lbaf[0].ds = BDRV_SECTOR_BITS;
id_ns->ncap = id_ns->nuse = id_ns->nsze =
- cpu_to_le64(n->ns_size >>
- id_ns->lbaf[NVME_ID_NS_FLBAS_INDEX(ns->id_ns.flbas)].ds);
+ cpu_to_le64(nvme_ns_nlbas(n, ns));
}
}
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 20/43] hw/block/nvme: factor out namespace setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (18 preceding siblings ...)
2020-06-17 14:48 ` [PULL 19/43] hw/block/nvme: add namespace helpers Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 21/43] hw/block/nvme: factor out pci setup Kevin Wolf
` (24 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-15-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 46 ++++++++++++++++++++++++++--------------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 3f3db17231..c98af03f44 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1417,6 +1417,27 @@ static void nvme_init_blk(NvmeCtrl *n, Error **errp)
false, errp);
}
+static void nvme_init_namespace(NvmeCtrl *n, NvmeNamespace *ns, Error **errp)
+{
+ int64_t bs_size;
+ NvmeIdNs *id_ns = &ns->id_ns;
+
+ bs_size = blk_getlength(n->conf.blk);
+ if (bs_size < 0) {
+ error_setg_errno(errp, -bs_size, "could not get backing file size");
+ return;
+ }
+
+ n->ns_size = bs_size;
+
+ id_ns->lbaf[0].ds = BDRV_SECTOR_BITS;
+ id_ns->nsze = cpu_to_le64(nvme_ns_nlbas(n, ns));
+
+ /* no thin provisioning */
+ id_ns->ncap = id_ns->nsze;
+ id_ns->nuse = id_ns->ncap;
+}
+
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
{
NvmeCtrl *n = NVME(pci_dev);
@@ -1424,7 +1445,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
Error *local_err = NULL;
int i;
- int64_t bs_size;
uint8_t *pci_conf;
nvme_check_constraints(n, &local_err);
@@ -1435,12 +1455,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
nvme_init_state(n);
- bs_size = blk_getlength(n->conf.blk);
- if (bs_size < 0) {
- error_setg(errp, "could not get backing file size");
- return;
- }
-
nvme_init_blk(n, &local_err);
if (local_err) {
error_propagate(errp, local_err);
@@ -1453,8 +1467,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
pcie_endpoint_cap_init(pci_dev, 0x80);
- n->ns_size = bs_size / (uint64_t)n->num_namespaces;
-
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
"nvme", n->reg_size);
pci_register_bar(pci_dev, 0,
@@ -1563,17 +1575,11 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
}
for (i = 0; i < n->num_namespaces; i++) {
- NvmeNamespace *ns = &n->namespaces[i];
- NvmeIdNs *id_ns = &ns->id_ns;
- id_ns->nsfeat = 0;
- id_ns->nlbaf = 0;
- id_ns->flbas = 0;
- id_ns->mc = 0;
- id_ns->dpc = 0;
- id_ns->dps = 0;
- id_ns->lbaf[0].ds = BDRV_SECTOR_BITS;
- id_ns->ncap = id_ns->nuse = id_ns->nsze =
- cpu_to_le64(nvme_ns_nlbas(n, ns));
+ nvme_init_namespace(n, &n->namespaces[i], &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
}
}
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 21/43] hw/block/nvme: factor out pci setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (19 preceding siblings ...)
2020-06-17 14:48 ` [PULL 20/43] hw/block/nvme: factor out namespace setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 22/43] hw/block/nvme: factor out cmb setup Kevin Wolf
` (23 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-16-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index c98af03f44..a4022b0291 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1438,6 +1438,22 @@ static void nvme_init_namespace(NvmeCtrl *n, NvmeNamespace *ns, Error **errp)
id_ns->nuse = id_ns->ncap;
}
+static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
+{
+ uint8_t *pci_conf = pci_dev->config;
+
+ pci_conf[PCI_INTERRUPT_PIN] = 1;
+ pci_config_set_prog_interface(pci_conf, 0x2);
+ pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
+ pcie_endpoint_cap_init(pci_dev, 0x80);
+
+ memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n, "nvme",
+ n->reg_size);
+ pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, &n->iomem);
+ msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
+}
+
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
{
NvmeCtrl *n = NVME(pci_dev);
@@ -1461,19 +1477,9 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
- pci_conf = pci_dev->config;
- pci_conf[PCI_INTERRUPT_PIN] = 1;
- pci_config_set_prog_interface(pci_dev->config, 0x2);
- pci_config_set_class(pci_dev->config, PCI_CLASS_STORAGE_EXPRESS);
- pcie_endpoint_cap_init(pci_dev, 0x80);
-
- memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n,
- "nvme", n->reg_size);
- pci_register_bar(pci_dev, 0,
- PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64,
- &n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
+ nvme_init_pci(n, pci_dev);
+ pci_conf = pci_dev->config;
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
strpadcpy((char *)id->mn, sizeof(id->mn), "QEMU NVMe Ctrl", ' ');
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 22/43] hw/block/nvme: factor out cmb setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (20 preceding siblings ...)
2020-06-17 14:48 ` [PULL 21/43] hw/block/nvme: factor out pci setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 23/43] hw/block/nvme: factor out pmr setup Kevin Wolf
` (22 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-17-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 43 ++++++++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 19 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index a4022b0291..8aabb4c3c3 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -56,6 +56,7 @@
#define NVME_REG_SIZE 0x1000
#define NVME_DB_SIZE 4
+#define NVME_CMB_BIR 2
#define NVME_GUEST_ERR(trace, fmt, ...) \
do { \
@@ -1438,6 +1439,28 @@ static void nvme_init_namespace(NvmeCtrl *n, NvmeNamespace *ns, Error **errp)
id_ns->nuse = id_ns->ncap;
}
+static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
+{
+ NVME_CMBLOC_SET_BIR(n->bar.cmbloc, NVME_CMB_BIR);
+ NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
+
+ NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
+ NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
+ NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
+ NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
+ NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
+ NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
+ NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
+
+ n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
+ memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
+ "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
+ pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64 |
+ PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
+}
+
static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
{
uint8_t *pci_conf = pci_dev->config;
@@ -1514,25 +1537,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->bar.intmc = n->bar.intms = 0;
if (n->params.cmb_size_mb) {
-
- NVME_CMBLOC_SET_BIR(n->bar.cmbloc, 2);
- NVME_CMBLOC_SET_OFST(n->bar.cmbloc, 0);
-
- NVME_CMBSZ_SET_SQS(n->bar.cmbsz, 1);
- NVME_CMBSZ_SET_CQS(n->bar.cmbsz, 0);
- NVME_CMBSZ_SET_LISTS(n->bar.cmbsz, 0);
- NVME_CMBSZ_SET_RDS(n->bar.cmbsz, 1);
- NVME_CMBSZ_SET_WDS(n->bar.cmbsz, 1);
- NVME_CMBSZ_SET_SZU(n->bar.cmbsz, 2); /* MBs */
- NVME_CMBSZ_SET_SZ(n->bar.cmbsz, n->params.cmb_size_mb);
-
- n->cmbuf = g_malloc0(NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
- memory_region_init_io(&n->ctrl_mem, OBJECT(n), &nvme_cmb_ops, n,
- "nvme-cmb", NVME_CMBSZ_GETSIZE(n->bar.cmbsz));
- pci_register_bar(pci_dev, NVME_CMBLOC_BIR(n->bar.cmbloc),
- PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
-
+ nvme_init_cmb(n, pci_dev);
} else if (n->pmrdev) {
/* Controller Capabilities register */
NVME_CAP_SET_PMRS(n->bar.cap, 1);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 23/43] hw/block/nvme: factor out pmr setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (21 preceding siblings ...)
2020-06-17 14:48 ` [PULL 22/43] hw/block/nvme: factor out cmb setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init Kevin Wolf
` (21 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-18-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 95 ++++++++++++++++++++++++++-----------------------
1 file changed, 51 insertions(+), 44 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 8aabb4c3c3..b954e7b7b2 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -57,6 +57,7 @@
#define NVME_REG_SIZE 0x1000
#define NVME_DB_SIZE 4
#define NVME_CMB_BIR 2
+#define NVME_PMR_BIR 2
#define NVME_GUEST_ERR(trace, fmt, ...) \
do { \
@@ -1461,6 +1462,55 @@ static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
PCI_BASE_ADDRESS_MEM_PREFETCH, &n->ctrl_mem);
}
+static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
+{
+ /* Controller Capabilities register */
+ NVME_CAP_SET_PMRS(n->bar.cap, 1);
+
+ /* PMR Capabities register */
+ n->bar.pmrcap = 0;
+ NVME_PMRCAP_SET_RDS(n->bar.pmrcap, 0);
+ NVME_PMRCAP_SET_WDS(n->bar.pmrcap, 0);
+ NVME_PMRCAP_SET_BIR(n->bar.pmrcap, NVME_PMR_BIR);
+ NVME_PMRCAP_SET_PMRTU(n->bar.pmrcap, 0);
+ /* Turn on bit 1 support */
+ NVME_PMRCAP_SET_PMRWBM(n->bar.pmrcap, 0x02);
+ NVME_PMRCAP_SET_PMRTO(n->bar.pmrcap, 0);
+ NVME_PMRCAP_SET_CMSS(n->bar.pmrcap, 0);
+
+ /* PMR Control register */
+ n->bar.pmrctl = 0;
+ NVME_PMRCTL_SET_EN(n->bar.pmrctl, 0);
+
+ /* PMR Status register */
+ n->bar.pmrsts = 0;
+ NVME_PMRSTS_SET_ERR(n->bar.pmrsts, 0);
+ NVME_PMRSTS_SET_NRDY(n->bar.pmrsts, 0);
+ NVME_PMRSTS_SET_HSTS(n->bar.pmrsts, 0);
+ NVME_PMRSTS_SET_CBAI(n->bar.pmrsts, 0);
+
+ /* PMR Elasticity Buffer Size register */
+ n->bar.pmrebs = 0;
+ NVME_PMREBS_SET_PMRSZU(n->bar.pmrebs, 0);
+ NVME_PMREBS_SET_RBB(n->bar.pmrebs, 0);
+ NVME_PMREBS_SET_PMRWBZ(n->bar.pmrebs, 0);
+
+ /* PMR Sustained Write Throughput register */
+ n->bar.pmrswtp = 0;
+ NVME_PMRSWTP_SET_PMRSWTU(n->bar.pmrswtp, 0);
+ NVME_PMRSWTP_SET_PMRSWTV(n->bar.pmrswtp, 0);
+
+ /* PMR Memory Space Control register */
+ n->bar.pmrmsc = 0;
+ NVME_PMRMSC_SET_CMSE(n->bar.pmrmsc, 0);
+ NVME_PMRMSC_SET_CBA(n->bar.pmrmsc, 0);
+
+ pci_register_bar(pci_dev, NVME_PMRCAP_BIR(n->bar.pmrcap),
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64 |
+ PCI_BASE_ADDRESS_MEM_PREFETCH, &n->pmrdev->mr);
+}
+
static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
{
uint8_t *pci_conf = pci_dev->config;
@@ -1539,50 +1589,7 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
} else if (n->pmrdev) {
- /* Controller Capabilities register */
- NVME_CAP_SET_PMRS(n->bar.cap, 1);
-
- /* PMR Capabities register */
- n->bar.pmrcap = 0;
- NVME_PMRCAP_SET_RDS(n->bar.pmrcap, 0);
- NVME_PMRCAP_SET_WDS(n->bar.pmrcap, 0);
- NVME_PMRCAP_SET_BIR(n->bar.pmrcap, 2);
- NVME_PMRCAP_SET_PMRTU(n->bar.pmrcap, 0);
- /* Turn on bit 1 support */
- NVME_PMRCAP_SET_PMRWBM(n->bar.pmrcap, 0x02);
- NVME_PMRCAP_SET_PMRTO(n->bar.pmrcap, 0);
- NVME_PMRCAP_SET_CMSS(n->bar.pmrcap, 0);
-
- /* PMR Control register */
- n->bar.pmrctl = 0;
- NVME_PMRCTL_SET_EN(n->bar.pmrctl, 0);
-
- /* PMR Status register */
- n->bar.pmrsts = 0;
- NVME_PMRSTS_SET_ERR(n->bar.pmrsts, 0);
- NVME_PMRSTS_SET_NRDY(n->bar.pmrsts, 0);
- NVME_PMRSTS_SET_HSTS(n->bar.pmrsts, 0);
- NVME_PMRSTS_SET_CBAI(n->bar.pmrsts, 0);
-
- /* PMR Elasticity Buffer Size register */
- n->bar.pmrebs = 0;
- NVME_PMREBS_SET_PMRSZU(n->bar.pmrebs, 0);
- NVME_PMREBS_SET_RBB(n->bar.pmrebs, 0);
- NVME_PMREBS_SET_PMRWBZ(n->bar.pmrebs, 0);
-
- /* PMR Sustained Write Throughput register */
- n->bar.pmrswtp = 0;
- NVME_PMRSWTP_SET_PMRSWTU(n->bar.pmrswtp, 0);
- NVME_PMRSWTP_SET_PMRSWTV(n->bar.pmrswtp, 0);
-
- /* PMR Memory Space Control register */
- n->bar.pmrmsc = 0;
- NVME_PMRMSC_SET_CMSE(n->bar.pmrmsc, 0);
- NVME_PMRMSC_SET_CBA(n->bar.pmrmsc, 0);
-
- pci_register_bar(pci_dev, NVME_PMRCAP_BIR(n->bar.pmrcap),
- PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH, &n->pmrdev->mr);
+ nvme_init_pmr(n, pci_dev);
}
for (i = 0; i < n->num_namespaces; i++) {
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (22 preceding siblings ...)
2020-06-17 14:48 ` [PULL 23/43] hw/block/nvme: factor out pmr setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 25/43] hw/block/nvme: factor out controller identify setup Kevin Wolf
` (20 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-19-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index b954e7b7b2..02a6a97df9 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1525,6 +1525,12 @@ static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
PCI_BASE_ADDRESS_MEM_TYPE_64, &n->iomem);
msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
+
+ if (n->params.cmb_size_mb) {
+ nvme_init_cmb(n, pci_dev);
+ } else if (n->pmrdev) {
+ nvme_init_pmr(n, pci_dev);
+ }
}
static void nvme_realize(PCIDevice *pci_dev, Error **errp)
@@ -1586,12 +1592,6 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->bar.vs = 0x00010200;
n->bar.intmc = n->bar.intms = 0;
- if (n->params.cmb_size_mb) {
- nvme_init_cmb(n, pci_dev);
- } else if (n->pmrdev) {
- nvme_init_pmr(n, pci_dev);
- }
-
for (i = 0; i < n->num_namespaces; i++) {
nvme_init_namespace(n, &n->namespaces[i], &local_err);
if (local_err) {
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 25/43] hw/block/nvme: factor out controller identify setup
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (23 preceding siblings ...)
2020-06-17 14:48 ` [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value Kevin Wolf
` (19 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20200609190333.59390-20-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 49 ++++++++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 23 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 02a6a97df9..e10fc774fc 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1533,32 +1533,11 @@ static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
}
}
-static void nvme_realize(PCIDevice *pci_dev, Error **errp)
+static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
{
- NvmeCtrl *n = NVME(pci_dev);
NvmeIdCtrl *id = &n->id_ctrl;
- Error *local_err = NULL;
-
- int i;
- uint8_t *pci_conf;
-
- nvme_check_constraints(n, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
-
- nvme_init_state(n);
-
- nvme_init_blk(n, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
-
- nvme_init_pci(n, pci_dev);
+ uint8_t *pci_conf = pci_dev->config;
- pci_conf = pci_dev->config;
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
strpadcpy((char *)id->mn, sizeof(id->mn), "QEMU NVMe Ctrl", ' ');
@@ -1591,6 +1570,30 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
n->bar.vs = 0x00010200;
n->bar.intmc = n->bar.intms = 0;
+}
+
+static void nvme_realize(PCIDevice *pci_dev, Error **errp)
+{
+ NvmeCtrl *n = NVME(pci_dev);
+ Error *local_err = NULL;
+
+ int i;
+
+ nvme_check_constraints(n, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ nvme_init_state(n);
+ nvme_init_blk(n, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ nvme_init_pci(n, pci_dev);
+ nvme_init_ctrl(n, pci_dev);
for (i = 0; i < n->num_namespaces; i++) {
nvme_init_namespace(n, &n->namespaces[i], &local_err);
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (24 preceding siblings ...)
2020-06-17 14:48 ` [PULL 25/43] hw/block/nvme: factor out controller identify setup Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 27/43] hw/block/nvme: add msix_qsize parameter Kevin Wolf
` (18 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Philippe Mathieu-Daudé <philmd@redhat.com>
msix_vector_use() returns -EINVAL on error. Assert it won't.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609190333.59390-21-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index e10fc774fc..fe17aa5d70 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -615,6 +615,10 @@ static uint16_t nvme_del_cq(NvmeCtrl *n, NvmeCmd *cmd)
static void nvme_init_cq(NvmeCQueue *cq, NvmeCtrl *n, uint64_t dma_addr,
uint16_t cqid, uint16_t vector, uint16_t size, uint16_t irq_enabled)
{
+ int ret;
+
+ ret = msix_vector_use(&n->parent_obj, vector);
+ assert(ret == 0);
cq->ctrl = n;
cq->cqid = cqid;
cq->size = size;
@@ -625,7 +629,6 @@ static void nvme_init_cq(NvmeCQueue *cq, NvmeCtrl *n, uint64_t dma_addr,
cq->head = cq->tail = 0;
QTAILQ_INIT(&cq->req_list);
QTAILQ_INIT(&cq->sq_list);
- msix_vector_use(&n->parent_obj, cq->vector);
n->cq[cqid] = cq;
cq->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, nvme_post_cqes, cq);
}
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 27/43] hw/block/nvme: add msix_qsize parameter
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (25 preceding siblings ...)
2020-06-17 14:48 ` [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 28/43] hw/block/nvme: verify msix_init_exclusive_bar() return value Kevin Wolf
` (17 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Decouple the requested maximum number of ioqpairs (param max_ioqpairs)
from the number of MSI-X interrupt vectors by introducing a new
msix_qsize parameter and initialize MSI-X with that. This allows
emulating a device that has fewer vectors than I/O queue pairs and also
allows more than 2048 queue pairs. To keep the device behaving as
previously, use a msix_qsize default of 65 (default max_ioqpairs + 1).
This decoupling was actually suggested by Maxim some time ago in a
slightly different context, so adding a Suggested-by.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20200609190333.59390-22-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.h | 1 +
hw/block/nvme.c | 17 +++++++++++++----
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/hw/block/nvme.h b/hw/block/nvme.h
index 61dd9b23b8..1d30c0bca2 100644
--- a/hw/block/nvme.h
+++ b/hw/block/nvme.h
@@ -7,6 +7,7 @@ typedef struct NvmeParams {
char *serial;
uint32_t num_queues; /* deprecated since 5.1 */
uint32_t max_ioqpairs;
+ uint16_t msix_qsize;
uint32_t cmb_size_mb;
} NvmeParams;
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index fe17aa5d70..acc6dbc900 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -54,6 +54,7 @@
#include "trace.h"
#include "nvme.h"
+#define NVME_MAX_IOQPAIRS 0xffff
#define NVME_REG_SIZE 0x1000
#define NVME_DB_SIZE 4
#define NVME_CMB_BIR 2
@@ -662,7 +663,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeCmd *cmd)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector > n->params.max_ioqpairs)) {
+ if (unlikely(vector >= n->params.msix_qsize)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -1371,9 +1372,16 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
}
if (params->max_ioqpairs < 1 ||
- params->max_ioqpairs > PCI_MSIX_FLAGS_QSIZE) {
+ params->max_ioqpairs > NVME_MAX_IOQPAIRS) {
error_setg(errp, "max_ioqpairs must be between 1 and %d",
- PCI_MSIX_FLAGS_QSIZE);
+ NVME_MAX_IOQPAIRS);
+ return;
+ }
+
+ if (params->msix_qsize < 1 ||
+ params->msix_qsize > PCI_MSIX_FLAGS_QSIZE + 1) {
+ error_setg(errp, "msix_qsize must be between 1 and %d",
+ PCI_MSIX_FLAGS_QSIZE + 1);
return;
}
@@ -1527,7 +1535,7 @@ static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
n->reg_size);
pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
PCI_BASE_ADDRESS_MEM_TYPE_64, &n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.max_ioqpairs + 1, 4, NULL);
+ msix_init_exclusive_bar(pci_dev, n->params.msix_qsize, 4, NULL);
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
@@ -1634,6 +1642,7 @@ static Property nvme_props[] = {
DEFINE_PROP_UINT32("cmb_size_mb", NvmeCtrl, params.cmb_size_mb, 0),
DEFINE_PROP_UINT32("num_queues", NvmeCtrl, params.num_queues, 0),
DEFINE_PROP_UINT32("max_ioqpairs", NvmeCtrl, params.max_ioqpairs, 64),
+ DEFINE_PROP_UINT16("msix_qsize", NvmeCtrl, params.msix_qsize, 65),
DEFINE_PROP_END_OF_LIST(),
};
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 28/43] hw/block/nvme: verify msix_init_exclusive_bar() return value
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (26 preceding siblings ...)
2020-06-17 14:48 ` [PULL 27/43] hw/block/nvme: add msix_qsize parameter Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 29/43] .gitignore: Ignore storage-daemon files Kevin Wolf
` (16 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Klaus Jensen <k.jensen@samsung.com>
Pass an Error to msix_init_exclusive_bar() and check it.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20200609190333.59390-23-its@irrelevant.dk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/nvme.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index acc6dbc900..2a2e43f681 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1522,7 +1522,7 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
PCI_BASE_ADDRESS_MEM_PREFETCH, &n->pmrdev->mr);
}
-static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
+static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
@@ -1535,7 +1535,9 @@ static void nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev)
n->reg_size);
pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
PCI_BASE_ADDRESS_MEM_TYPE_64, &n->iomem);
- msix_init_exclusive_bar(pci_dev, n->params.msix_qsize, 4, NULL);
+ if (msix_init_exclusive_bar(pci_dev, n->params.msix_qsize, 4, errp)) {
+ return;
+ }
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
@@ -1603,7 +1605,12 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
return;
}
- nvme_init_pci(n, pci_dev);
+ nvme_init_pci(n, pci_dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
nvme_init_ctrl(n, pci_dev);
for (i = 0; i < n->num_namespaces; i++) {
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 29/43] .gitignore: Ignore storage-daemon files
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (27 preceding siblings ...)
2020-06-17 14:48 ` [PULL 28/43] hw/block/nvme: verify msix_init_exclusive_bar() return value Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 30/43] virtio-blk: store opt_io_size with correct size Kevin Wolf
` (15 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Bolshakov <r.bolshakov@yadro.com>
The files are generated.
Fixes: 2af282ec51a ("qemu-storage-daemon: Add --monitor option")
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200612105830.17082-1-r.bolshakov@yadro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
.gitignore | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/.gitignore b/.gitignore
index 0c5af83aa7..90acb4347d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -34,18 +34,18 @@
/qapi/qapi-builtin-types.[ch]
/qapi/qapi-builtin-visit.[ch]
/qapi/qapi-commands-*.[ch]
-/qapi/qapi-commands.[ch]
-/qapi/qapi-emit-events.[ch]
+**/qapi/qapi-commands.[ch]
+**/qapi/qapi-emit-events.[ch]
/qapi/qapi-events-*.[ch]
-/qapi/qapi-events.[ch]
-/qapi/qapi-init-commands.[ch]
-/qapi/qapi-introspect.[ch]
+**/qapi/qapi-events.[ch]
+**/qapi/qapi-init-commands.[ch]
+**/qapi/qapi-introspect.[ch]
/qapi/qapi-types-*.[ch]
-/qapi/qapi-types.[ch]
+**/qapi/qapi-types.[ch]
/qapi/qapi-visit-*.[ch]
!/qapi/qapi-visit-core.c
-/qapi/qapi-visit.[ch]
-/qapi/qapi-doc.texi
+**/qapi/qapi-visit.[ch]
+**/qapi/qapi-doc.texi
/qemu-edid
/qemu-img
/qemu-nbd
@@ -59,6 +59,7 @@
/qemu-keymap
/qemu-monitor.texi
/qemu-monitor-info.texi
+/qemu-storage-daemon
/qemu-version.h
/qemu-version.h.tmp
/module_block.h
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 30/43] virtio-blk: store opt_io_size with correct size
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (28 preceding siblings ...)
2020-06-17 14:48 ` [PULL 29/43] .gitignore: Ignore storage-daemon files Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 31/43] block: consolidate blocksize properties consistency checks Kevin Wolf
` (14 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
The width of opt_io_size in virtio_blk_config is 32bit. However, it's
written with virtio_stw_p; this may result in value truncation, and on
big-endian systems with legacy virtio in completely bogus readings in
the guest.
Use the appropriate accessor to store it.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200528225516.1676602-2-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/virtio-blk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 8882a1d1d4..6938a75aa5 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -930,7 +930,7 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
virtio_stw_p(vdev, &blkcfg.geometry.cylinders, conf->cyls);
virtio_stl_p(vdev, &blkcfg.blk_size, blk_size);
virtio_stw_p(vdev, &blkcfg.min_io_size, conf->min_io_size / blk_size);
- virtio_stw_p(vdev, &blkcfg.opt_io_size, conf->opt_io_size / blk_size);
+ virtio_stl_p(vdev, &blkcfg.opt_io_size, conf->opt_io_size / blk_size);
blkcfg.geometry.heads = conf->heads;
/*
* We must ensure that the block device capacity is a multiple of
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 31/43] block: consolidate blocksize properties consistency checks
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (29 preceding siblings ...)
2020-06-17 14:48 ` [PULL 30/43] virtio-blk: store opt_io_size with correct size Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 32/43] qdev-properties: blocksize: use same limits in code and description Kevin Wolf
` (13 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Several block device properties related to blocksize configuration must
be in certain relationship WRT each other: physical block must be no
smaller than logical block; min_io_size, opt_io_size, and
discard_granularity must be a multiple of a logical block.
To ensure these requirements are met, add corresponding consistency
checks to blkconf_blocksizes, adjusting its signature to communicate
possible error to the caller. Also remove the now redundant consistency
checks from the specific devices.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20200528225516.1676602-3-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/block/block.h | 2 +-
hw/block/block.c | 30 +++++++++++++++++++++++++++++-
hw/block/fdc.c | 5 ++++-
hw/block/nvme.c | 4 +++-
hw/block/swim.c | 5 ++++-
hw/block/virtio-blk.c | 7 +------
hw/block/xen-block.c | 6 +-----
hw/ide/qdev.c | 5 ++++-
hw/scsi/scsi-disk.c | 12 +++++-------
hw/usb/dev-storage.c | 5 ++++-
tests/qemu-iotests/172.out | 2 +-
11 files changed, 57 insertions(+), 26 deletions(-)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h
index d7246f3862..784953a237 100644
--- a/include/hw/block/block.h
+++ b/include/hw/block/block.h
@@ -87,7 +87,7 @@ bool blk_check_size_and_read_all(BlockBackend *blk, void *buf, hwaddr size,
bool blkconf_geometry(BlockConf *conf, int *trans,
unsigned cyls_max, unsigned heads_max, unsigned secs_max,
Error **errp);
-void blkconf_blocksizes(BlockConf *conf);
+bool blkconf_blocksizes(BlockConf *conf, Error **errp);
bool blkconf_apply_backend_options(BlockConf *conf, bool readonly,
bool resizable, Error **errp);
diff --git a/hw/block/block.c b/hw/block/block.c
index bf56c7612b..b22207c921 100644
--- a/hw/block/block.c
+++ b/hw/block/block.c
@@ -61,7 +61,7 @@ bool blk_check_size_and_read_all(BlockBackend *blk, void *buf, hwaddr size,
return true;
}
-void blkconf_blocksizes(BlockConf *conf)
+bool blkconf_blocksizes(BlockConf *conf, Error **errp)
{
BlockBackend *blk = conf->blk;
BlockSizes blocksizes;
@@ -83,6 +83,34 @@ void blkconf_blocksizes(BlockConf *conf)
conf->logical_block_size = BDRV_SECTOR_SIZE;
}
}
+
+ if (conf->logical_block_size > conf->physical_block_size) {
+ error_setg(errp,
+ "logical_block_size > physical_block_size not supported");
+ return false;
+ }
+
+ if (!QEMU_IS_ALIGNED(conf->min_io_size, conf->logical_block_size)) {
+ error_setg(errp,
+ "min_io_size must be a multiple of logical_block_size");
+ return false;
+ }
+
+ if (!QEMU_IS_ALIGNED(conf->opt_io_size, conf->logical_block_size)) {
+ error_setg(errp,
+ "opt_io_size must be a multiple of logical_block_size");
+ return false;
+ }
+
+ if (conf->discard_granularity != -1 &&
+ !QEMU_IS_ALIGNED(conf->discard_granularity,
+ conf->logical_block_size)) {
+ error_setg(errp, "discard_granularity must be "
+ "a multiple of logical_block_size");
+ return false;
+ }
+
+ return true;
}
bool blkconf_apply_backend_options(BlockConf *conf, bool readonly,
diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index 8528b9a3c7..be0674e4aa 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -554,7 +554,10 @@ static void floppy_drive_realize(DeviceState *qdev, Error **errp)
read_only = !blk_bs(dev->conf.blk) || blk_is_read_only(dev->conf.blk);
}
- blkconf_blocksizes(&dev->conf);
+ if (!blkconf_blocksizes(&dev->conf, errp)) {
+ return;
+ }
+
if (dev->conf.logical_block_size != 512 ||
dev->conf.physical_block_size != 512)
{
diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 2a2e43f681..1aee042d4c 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1425,7 +1425,9 @@ static void nvme_init_state(NvmeCtrl *n)
static void nvme_init_blk(NvmeCtrl *n, Error **errp)
{
- blkconf_blocksizes(&n->conf);
+ if (!blkconf_blocksizes(&n->conf, errp)) {
+ return;
+ }
blkconf_apply_backend_options(&n->conf, blk_is_read_only(n->conf.blk),
false, errp);
}
diff --git a/hw/block/swim.c b/hw/block/swim.c
index 8f124782f4..74f56e8f46 100644
--- a/hw/block/swim.c
+++ b/hw/block/swim.c
@@ -189,7 +189,10 @@ static void swim_drive_realize(DeviceState *qdev, Error **errp)
assert(ret == 0);
}
- blkconf_blocksizes(&dev->conf);
+ if (!blkconf_blocksizes(&dev->conf, errp)) {
+ return;
+ }
+
if (dev->conf.logical_block_size != 512 ||
dev->conf.physical_block_size != 512)
{
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 6938a75aa5..413783693c 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -1174,12 +1174,7 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
return;
}
- blkconf_blocksizes(&conf->conf);
-
- if (conf->conf.logical_block_size >
- conf->conf.physical_block_size) {
- error_setg(errp,
- "logical_block_size > physical_block_size not supported");
+ if (!blkconf_blocksizes(&conf->conf, errp)) {
return;
}
diff --git a/hw/block/xen-block.c b/hw/block/xen-block.c
index 2827c90ac7..1b7bc5de08 100644
--- a/hw/block/xen-block.c
+++ b/hw/block/xen-block.c
@@ -239,11 +239,7 @@ static void xen_block_realize(XenDevice *xendev, Error **errp)
return;
}
- blkconf_blocksizes(conf);
-
- if (conf->logical_block_size > conf->physical_block_size) {
- error_setg(
- errp, "logical_block_size > physical_block_size not supported");
+ if (!blkconf_blocksizes(conf, errp)) {
return;
}
diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index caa88526f5..3ccb5e2529 100644
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -187,7 +187,10 @@ static void ide_dev_initfn(IDEDevice *dev, IDEDriveKind kind, Error **errp)
return;
}
- blkconf_blocksizes(&dev->conf);
+ if (!blkconf_blocksizes(&dev->conf, errp)) {
+ return;
+ }
+
if (dev->conf.logical_block_size != 512) {
error_setg(errp, "logical_block_size must be 512 for IDE");
return;
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 387503e11b..8ce68a9dd6 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -2346,12 +2346,7 @@ static void scsi_realize(SCSIDevice *dev, Error **errp)
return;
}
- blkconf_blocksizes(&s->qdev.conf);
-
- if (s->qdev.conf.logical_block_size >
- s->qdev.conf.physical_block_size) {
- error_setg(errp,
- "logical_block_size > physical_block_size not supported");
+ if (!blkconf_blocksizes(&s->qdev.conf, errp)) {
return;
}
@@ -2436,7 +2431,9 @@ static void scsi_hd_realize(SCSIDevice *dev, Error **errp)
if (s->qdev.conf.blk) {
ctx = blk_get_aio_context(s->qdev.conf.blk);
aio_context_acquire(ctx);
- blkconf_blocksizes(&s->qdev.conf);
+ if (!blkconf_blocksizes(&s->qdev.conf, errp)) {
+ goto out;
+ }
}
s->qdev.blocksize = s->qdev.conf.logical_block_size;
s->qdev.type = TYPE_DISK;
@@ -2444,6 +2441,7 @@ static void scsi_hd_realize(SCSIDevice *dev, Error **errp)
s->product = g_strdup("QEMU HARDDISK");
}
scsi_realize(&s->qdev, errp);
+out:
if (ctx) {
aio_context_release(ctx);
}
diff --git a/hw/usb/dev-storage.c b/hw/usb/dev-storage.c
index a5204b6f2a..f5977eb72e 100644
--- a/hw/usb/dev-storage.c
+++ b/hw/usb/dev-storage.c
@@ -612,7 +612,10 @@ static void usb_msd_storage_realize(USBDevice *dev, Error **errp)
return;
}
- blkconf_blocksizes(&s->conf);
+ if (!blkconf_blocksizes(&s->conf, errp)) {
+ return;
+ }
+
if (!blkconf_apply_backend_options(&s->conf, blk_is_read_only(blk), true,
errp)) {
return;
diff --git a/tests/qemu-iotests/172.out b/tests/qemu-iotests/172.out
index 7abbe82427..59cc70aebb 100644
--- a/tests/qemu-iotests/172.out
+++ b/tests/qemu-iotests/172.out
@@ -1204,7 +1204,7 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physica
drive-type = "144"
Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,logical_block_size=4096
-QEMU_PROG: -device floppy,drive=none0,logical_block_size=4096: Physical and logical block size must be 512 for floppy
+QEMU_PROG: -device floppy,drive=none0,logical_block_size=4096: logical_block_size > physical_block_size not supported
Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physical_block_size=1024
QEMU_PROG: -device floppy,drive=none0,physical_block_size=1024: Physical and logical block size must be 512 for floppy
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 32/43] qdev-properties: blocksize: use same limits in code and description
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (30 preceding siblings ...)
2020-06-17 14:48 ` [PULL 31/43] block: consolidate blocksize properties consistency checks Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:48 ` [PULL 33/43] qdev-properties: add size32 property type Kevin Wolf
` (12 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Make it easier (more visible) to maintain the limits on the blocksize
properties in sync with the respective description, by using macros both
in the code and in the description.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-4-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/core/qdev-properties.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index cc924815da..249dc69bd8 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -729,6 +729,13 @@ const PropertyInfo qdev_prop_pci_devfn = {
/* --- blocksize --- */
+/* lower limit is sector size */
+#define MIN_BLOCK_SIZE 512
+#define MIN_BLOCK_SIZE_STR stringify(MIN_BLOCK_SIZE)
+/* upper limit is the max power of 2 that fits in uint16_t */
+#define MAX_BLOCK_SIZE 32768
+#define MAX_BLOCK_SIZE_STR stringify(MAX_BLOCK_SIZE)
+
static void set_blocksize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
@@ -736,8 +743,6 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
Property *prop = opaque;
uint16_t value, *ptr = qdev_get_prop_ptr(dev, prop);
Error *local_err = NULL;
- const int64_t min = 512;
- const int64_t max = 32768;
if (dev->realized) {
qdev_prop_set_after_realize(dev, name, errp);
@@ -750,9 +755,12 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
return;
}
/* value of 0 means "unset" */
- if (value && (value < min || value > max)) {
- error_setg(errp, QERR_PROPERTY_VALUE_OUT_OF_RANGE,
- dev->id ? : "", name, (int64_t)value, min, max);
+ if (value && (value < MIN_BLOCK_SIZE || value > MAX_BLOCK_SIZE)) {
+ error_setg(errp,
+ "Property %s.%s doesn't take value %" PRIu16
+ " (minimum: " MIN_BLOCK_SIZE_STR
+ ", maximum: " MAX_BLOCK_SIZE_STR ")",
+ dev->id ? : "", name, value);
return;
}
@@ -769,7 +777,8 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
const PropertyInfo qdev_prop_blocksize = {
.name = "uint16",
- .description = "A power of two between 512 and 32768",
+ .description = "A power of two between " MIN_BLOCK_SIZE_STR
+ " and " MAX_BLOCK_SIZE_STR,
.get = get_uint16,
.set = set_blocksize,
.set_default_value = set_default_value_uint,
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 33/43] qdev-properties: add size32 property type
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (31 preceding siblings ...)
2020-06-17 14:48 ` [PULL 32/43] qdev-properties: blocksize: use same limits in code and description Kevin Wolf
@ 2020-06-17 14:48 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 34/43] qdev-properties: make blocksize accept size suffixes Kevin Wolf
` (11 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:48 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t. It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).
The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/qdev-properties.h | 3 +++
hw/core/qdev-properties.c | 40 ++++++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index f161604fb6..c03eadfad6 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -29,6 +29,7 @@ extern const PropertyInfo qdev_prop_drive;
extern const PropertyInfo qdev_prop_drive_iothread;
extern const PropertyInfo qdev_prop_netdev;
extern const PropertyInfo qdev_prop_pci_devfn;
+extern const PropertyInfo qdev_prop_size32;
extern const PropertyInfo qdev_prop_blocksize;
extern const PropertyInfo qdev_prop_pci_host_devaddr;
extern const PropertyInfo qdev_prop_uuid;
@@ -196,6 +197,8 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
BlockdevOnError)
#define DEFINE_PROP_BIOS_CHS_TRANS(_n, _s, _f, _d) \
DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_bios_chs_trans, int)
+#define DEFINE_PROP_SIZE32(_n, _s, _f, _d) \
+ DEFINE_PROP_UNSIGNED(_n, _s, _f, _d, qdev_prop_size32, uint32_t)
#define DEFINE_PROP_BLOCKSIZE(_n, _s, _f) \
DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint16_t)
#define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 249dc69bd8..40c13f6ebe 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -727,6 +727,46 @@ const PropertyInfo qdev_prop_pci_devfn = {
.set_default_value = set_default_value_int,
};
+/* --- 32bit unsigned int 'size' type --- */
+
+static void set_size32(Object *obj, Visitor *v, const char *name, void *opaque,
+ Error **errp)
+{
+ DeviceState *dev = DEVICE(obj);
+ Property *prop = opaque;
+ uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
+ uint64_t value;
+ Error *local_err = NULL;
+
+ if (dev->realized) {
+ qdev_prop_set_after_realize(dev, name, errp);
+ return;
+ }
+
+ visit_type_size(v, name, &value, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ if (value > UINT32_MAX) {
+ error_setg(errp,
+ "Property %s.%s doesn't take value %" PRIu64
+ " (maximum: %u)",
+ dev->id ? : "", name, value, UINT32_MAX);
+ return;
+ }
+
+ *ptr = value;
+}
+
+const PropertyInfo qdev_prop_size32 = {
+ .name = "size",
+ .get = get_uint32,
+ .set = set_size32,
+ .set_default_value = set_default_value_uint,
+};
+
/* --- blocksize --- */
/* lower limit is sector size */
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 34/43] qdev-properties: make blocksize accept size suffixes
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (32 preceding siblings ...)
2020-06-17 14:48 ` [PULL 33/43] qdev-properties: add size32 property type Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 35/43] block: make BlockConf size props 32bit and " Kevin Wolf
` (10 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
It appears convenient to be able to specify physical_block_size and
logical_block_size using common size suffixes.
Teach the blocksize property setter to interpret them. Also express the
upper and lower limits in the respective units.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-6-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/core/qdev-properties.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 40c13f6ebe..c9af6a1341 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -14,6 +14,7 @@
#include "qapi/visitor.h"
#include "chardev/char.h"
#include "qemu/uuid.h"
+#include "qemu/units.h"
void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
Error **errp)
@@ -771,17 +772,18 @@ const PropertyInfo qdev_prop_size32 = {
/* lower limit is sector size */
#define MIN_BLOCK_SIZE 512
-#define MIN_BLOCK_SIZE_STR stringify(MIN_BLOCK_SIZE)
+#define MIN_BLOCK_SIZE_STR "512 B"
/* upper limit is the max power of 2 that fits in uint16_t */
-#define MAX_BLOCK_SIZE 32768
-#define MAX_BLOCK_SIZE_STR stringify(MAX_BLOCK_SIZE)
+#define MAX_BLOCK_SIZE (32 * KiB)
+#define MAX_BLOCK_SIZE_STR "32 KiB"
static void set_blocksize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
- uint16_t value, *ptr = qdev_get_prop_ptr(dev, prop);
+ uint16_t *ptr = qdev_get_prop_ptr(dev, prop);
+ uint64_t value;
Error *local_err = NULL;
if (dev->realized) {
@@ -789,7 +791,7 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
return;
}
- visit_type_uint16(v, name, &value, &local_err);
+ visit_type_size(v, name, &value, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
@@ -797,7 +799,7 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
/* value of 0 means "unset" */
if (value && (value < MIN_BLOCK_SIZE || value > MAX_BLOCK_SIZE)) {
error_setg(errp,
- "Property %s.%s doesn't take value %" PRIu16
+ "Property %s.%s doesn't take value %" PRIu64
" (minimum: " MIN_BLOCK_SIZE_STR
", maximum: " MAX_BLOCK_SIZE_STR ")",
dev->id ? : "", name, value);
@@ -816,7 +818,7 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
}
const PropertyInfo qdev_prop_blocksize = {
- .name = "uint16",
+ .name = "size",
.description = "A power of two between " MIN_BLOCK_SIZE_STR
" and " MAX_BLOCK_SIZE_STR,
.get = get_uint16,
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 35/43] block: make BlockConf size props 32bit and accept size suffixes
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (33 preceding siblings ...)
2020-06-17 14:49 ` [PULL 34/43] qdev-properties: make blocksize accept size suffixes Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 36/43] qdev-properties: add getter for size32 and blocksize Kevin Wolf
` (9 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Convert all size-related properties in BlockConf to 32bit. This will
accommodate bigger block sizes (in a followup patch). This also allows
to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE
or via DEFINE_PROP_SIZE32.
Also, since min_io_size is exposed to the guest by scsi and virtio-blk
devices as an uint16_t in units of logical blocks, introduce an
additional check in blkconf_blocksizes to prevent its silent truncation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/hw/block/block.h | 12 ++++++------
include/hw/qdev-properties.h | 2 +-
hw/block/block.c | 10 ++++++++++
hw/core/qdev-properties.c | 4 ++--
4 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/include/hw/block/block.h b/include/hw/block/block.h
index 784953a237..1e8b6253dd 100644
--- a/include/hw/block/block.h
+++ b/include/hw/block/block.h
@@ -18,9 +18,9 @@
typedef struct BlockConf {
BlockBackend *blk;
- uint16_t physical_block_size;
- uint16_t logical_block_size;
- uint16_t min_io_size;
+ uint32_t physical_block_size;
+ uint32_t logical_block_size;
+ uint32_t min_io_size;
uint32_t opt_io_size;
int32_t bootindex;
uint32_t discard_granularity;
@@ -51,9 +51,9 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf)
_conf.logical_block_size), \
DEFINE_PROP_BLOCKSIZE("physical_block_size", _state, \
_conf.physical_block_size), \
- DEFINE_PROP_UINT16("min_io_size", _state, _conf.min_io_size, 0), \
- DEFINE_PROP_UINT32("opt_io_size", _state, _conf.opt_io_size, 0), \
- DEFINE_PROP_UINT32("discard_granularity", _state, \
+ DEFINE_PROP_SIZE32("min_io_size", _state, _conf.min_io_size, 0), \
+ DEFINE_PROP_SIZE32("opt_io_size", _state, _conf.opt_io_size, 0), \
+ DEFINE_PROP_SIZE32("discard_granularity", _state, \
_conf.discard_granularity, -1), \
DEFINE_PROP_ON_OFF_AUTO("write-cache", _state, _conf.wce, \
ON_OFF_AUTO_AUTO), \
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index c03eadfad6..5252bb6b1a 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -200,7 +200,7 @@ extern const PropertyInfo qdev_prop_pcie_link_width;
#define DEFINE_PROP_SIZE32(_n, _s, _f, _d) \
DEFINE_PROP_UNSIGNED(_n, _s, _f, _d, qdev_prop_size32, uint32_t)
#define DEFINE_PROP_BLOCKSIZE(_n, _s, _f) \
- DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint16_t)
+ DEFINE_PROP_UNSIGNED(_n, _s, _f, 0, qdev_prop_blocksize, uint32_t)
#define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
DEFINE_PROP(_n, _s, _f, qdev_prop_pci_host_devaddr, PCIHostDeviceAddress)
#define DEFINE_PROP_OFF_AUTO_PCIBAR(_n, _s, _f, _d) \
diff --git a/hw/block/block.c b/hw/block/block.c
index b22207c921..1e34573da7 100644
--- a/hw/block/block.c
+++ b/hw/block/block.c
@@ -96,6 +96,16 @@ bool blkconf_blocksizes(BlockConf *conf, Error **errp)
return false;
}
+ /*
+ * all devices which support min_io_size (scsi and virtio-blk) expose it to
+ * the guest as a uint16_t in units of logical blocks
+ */
+ if (conf->min_io_size / conf->logical_block_size > UINT16_MAX) {
+ error_setg(errp, "min_io_size must not exceed %u logical blocks",
+ UINT16_MAX);
+ return false;
+ }
+
if (!QEMU_IS_ALIGNED(conf->opt_io_size, conf->logical_block_size)) {
error_setg(errp,
"opt_io_size must be a multiple of logical_block_size");
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index c9af6a1341..bd4abdc1d1 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -782,7 +782,7 @@ static void set_blocksize(Object *obj, Visitor *v, const char *name,
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
- uint16_t *ptr = qdev_get_prop_ptr(dev, prop);
+ uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
uint64_t value;
Error *local_err = NULL;
@@ -821,7 +821,7 @@ const PropertyInfo qdev_prop_blocksize = {
.name = "size",
.description = "A power of two between " MIN_BLOCK_SIZE_STR
" and " MAX_BLOCK_SIZE_STR,
- .get = get_uint16,
+ .get = get_uint32,
.set = set_blocksize,
.set_default_value = set_default_value_uint,
};
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 36/43] qdev-properties: add getter for size32 and blocksize
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (34 preceding siblings ...)
2020-06-17 14:49 ` [PULL 35/43] block: make BlockConf size props 32bit and " Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 37/43] block: lift blocksize property limit to 2 MiB Kevin Wolf
` (8 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Add getter for size32, and use it for blocksize, too.
In its human-readable branch, it reports approximate size in
human-readable units next to the exact byte value, like the getter for
64bit size does.
Adjust the expected test output accordingly.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-8-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/core/qdev-properties.c | 15 +-
tests/qemu-iotests/172.out | 530 ++++++++++++++++++-------------------
2 files changed, 278 insertions(+), 267 deletions(-)
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index bd4abdc1d1..63d48db70c 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -730,6 +730,17 @@ const PropertyInfo qdev_prop_pci_devfn = {
/* --- 32bit unsigned int 'size' type --- */
+static void get_size32(Object *obj, Visitor *v, const char *name, void *opaque,
+ Error **errp)
+{
+ DeviceState *dev = DEVICE(obj);
+ Property *prop = opaque;
+ uint32_t *ptr = qdev_get_prop_ptr(dev, prop);
+ uint64_t value = *ptr;
+
+ visit_type_size(v, name, &value, errp);
+}
+
static void set_size32(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
@@ -763,7 +774,7 @@ static void set_size32(Object *obj, Visitor *v, const char *name, void *opaque,
const PropertyInfo qdev_prop_size32 = {
.name = "size",
- .get = get_uint32,
+ .get = get_size32,
.set = set_size32,
.set_default_value = set_default_value_uint,
};
@@ -821,7 +832,7 @@ const PropertyInfo qdev_prop_blocksize = {
.name = "size",
.description = "A power of two between " MIN_BLOCK_SIZE_STR
" and " MAX_BLOCK_SIZE_STR,
- .get = get_uint32,
+ .get = get_size32,
.set = set_blocksize,
.set_default_value = set_default_value_uint,
};
diff --git a/tests/qemu-iotests/172.out b/tests/qemu-iotests/172.out
index 59cc70aebb..e782c5957e 100644
--- a/tests/qemu-iotests/172.out
+++ b/tests/qemu-iotests/172.out
@@ -24,11 +24,11 @@ Testing:
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -54,11 +54,11 @@ Testing: -fda TEST_DIR/t.qcow2
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -81,22 +81,22 @@ Testing: -fdb TEST_DIR/t.qcow2
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -119,22 +119,22 @@ Testing: -fda TEST_DIR/t.qcow2 -fdb TEST_DIR/t.qcow2.2
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -160,11 +160,11 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -187,22 +187,22 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2,index=1
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -225,22 +225,22 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=floppy,file=TEST_DIR/t
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -266,11 +266,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveA=none0
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -293,11 +293,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -global isa-fdc.driveB=none0
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -320,22 +320,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 1 (0x1)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -361,11 +361,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -388,11 +388,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,unit=1
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -415,22 +415,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 1 (0x1)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -456,22 +456,22 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -global is
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -494,22 +494,22 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -global is
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -532,11 +532,11 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -global is
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -559,11 +559,11 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -global is
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -589,22 +589,22 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -627,22 +627,22 @@ Testing: -fda TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -665,22 +665,22 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -703,22 +703,22 @@ Testing: -fdb TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qcow2.2 -device fl
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 1 (0x1)
drive = "floppy1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -750,22 +750,22 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.q
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -788,22 +788,22 @@ Testing: -drive if=floppy,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.q
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "floppy0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -832,22 +832,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 1 (0x1)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -870,22 +870,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 1 (0x1)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -908,22 +908,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 0 (0x0)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -946,22 +946,22 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -drive if=none,file=TEST_DIR/t.qco
dev: floppy, id ""
unit = 0 (0x0)
drive = "none1"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
dev: floppy, id ""
unit = 1 (0x1)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -999,11 +999,11 @@ Testing: -device floppy
dev: floppy, id ""
unit = 0 (0x0)
drive = ""
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -1026,11 +1026,11 @@ Testing: -device floppy,drive-type=120
dev: floppy, id ""
unit = 0 (0x0)
drive = ""
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "120"
@@ -1053,11 +1053,11 @@ Testing: -device floppy,drive-type=144
dev: floppy, id ""
unit = 0 (0x0)
drive = ""
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -1080,11 +1080,11 @@ Testing: -device floppy,drive-type=288
dev: floppy, id ""
unit = 0 (0x0)
drive = ""
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -1110,11 +1110,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-t
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "120"
@@ -1137,11 +1137,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,drive-t
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "288"
@@ -1167,11 +1167,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,logical
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
@@ -1194,11 +1194,11 @@ Testing: -drive if=none,file=TEST_DIR/t.qcow2 -device floppy,drive=none0,physica
dev: floppy, id ""
unit = 0 (0x0)
drive = "none0"
- logical_block_size = 512 (0x200)
- physical_block_size = 512 (0x200)
- min_io_size = 0 (0x0)
- opt_io_size = 0 (0x0)
- discard_granularity = 4294967295 (0xffffffff)
+ logical_block_size = 512 (512 B)
+ physical_block_size = 512 (512 B)
+ min_io_size = 0 (0 B)
+ opt_io_size = 0 (0 B)
+ discard_granularity = 4294967295 (4 GiB)
write-cache = "auto"
share-rw = false
drive-type = "144"
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 37/43] block: lift blocksize property limit to 2 MiB
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (35 preceding siblings ...)
2020-06-17 14:49 ` [PULL 36/43] qdev-properties: add getter for size32 and blocksize Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 38/43] iotests.py: Add skip_for_formats() decorator Kevin Wolf
` (7 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Roman Kagan <rvkagan@yandex-team.ru>
Logical and physical block sizes in QEMU are limited to 32 KiB.
This appears unnecessarily tight, and we've seen bigger block sizes
handy at times.
Lift the limitation up to 2 MiB which appears to be good enough for
everybody, and matches the qcow2 cluster size limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-9-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/core/qdev-properties.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 63d48db70c..ead35d7ffd 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -784,9 +784,12 @@ const PropertyInfo qdev_prop_size32 = {
/* lower limit is sector size */
#define MIN_BLOCK_SIZE 512
#define MIN_BLOCK_SIZE_STR "512 B"
-/* upper limit is the max power of 2 that fits in uint16_t */
-#define MAX_BLOCK_SIZE (32 * KiB)
-#define MAX_BLOCK_SIZE_STR "32 KiB"
+/*
+ * upper limit is arbitrary, 2 MiB looks sufficient for all sensible uses, and
+ * matches qcow2 cluster size limit
+ */
+#define MAX_BLOCK_SIZE (2 * MiB)
+#define MAX_BLOCK_SIZE_STR "2 MiB"
static void set_blocksize(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 38/43] iotests.py: Add skip_for_formats() decorator
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (36 preceding siblings ...)
2020-06-17 14:49 ` [PULL 37/43] block: lift blocksize property limit to 2 MiB Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 39/43] iotests/041: Skip test_small_target for qed Kevin Wolf
` (6 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Sometimes, we want to skip some test methods for certain formats. This
decorator allows that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200617104822.27525-2-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/iotests.py | 16 ++++++++++++++++
tests/qemu-iotests/118 | 7 +++----
2 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
index f20d90f969..5ea4c4df8b 100644
--- a/tests/qemu-iotests/iotests.py
+++ b/tests/qemu-iotests/iotests.py
@@ -1103,6 +1103,22 @@ def skip_if_unsupported(required_formats=(), read_only=False):
return func_wrapper
return skip_test_decorator
+def skip_for_formats(formats: Sequence[str] = ()) \
+ -> Callable[[Callable[[QMPTestCase, List[Any], Dict[str, Any]], None]],
+ Callable[[QMPTestCase, List[Any], Dict[str, Any]], None]]:
+ '''Skip Test Decorator
+ Skips the test for the given formats'''
+ def skip_test_decorator(func):
+ def func_wrapper(test_case: QMPTestCase, *args: List[Any],
+ **kwargs: Dict[str, Any]) -> None:
+ if imgfmt in formats:
+ msg = f'{test_case}: Skipped for format {imgfmt}'
+ test_case.case_skip(msg)
+ else:
+ func(test_case, *args, **kwargs)
+ return func_wrapper
+ return skip_test_decorator
+
def skip_if_user_is_root(func):
'''Skip Test Decorator
Runs the test only without root permissions'''
diff --git a/tests/qemu-iotests/118 b/tests/qemu-iotests/118
index adc8a848b5..2350929fd8 100755
--- a/tests/qemu-iotests/118
+++ b/tests/qemu-iotests/118
@@ -683,11 +683,10 @@ class TestBlockJobsAfterCycle(ChangeBaseClass):
except OSError:
pass
+ # We need backing file support
+ @iotests.skip_for_formats(('vpc', 'parallels', 'qcow', 'vdi', 'vmdk', 'raw',
+ 'vhdx'))
def test_snapshot_and_commit(self):
- # We need backing file support
- if iotests.imgfmt != 'qcow2' and iotests.imgfmt != 'qed':
- return
-
result = self.vm.qmp('blockdev-snapshot-sync', device='drive0',
snapshot_file=new_img,
format=iotests.imgfmt)
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 39/43] iotests/041: Skip test_small_target for qed
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (37 preceding siblings ...)
2020-06-17 14:49 ` [PULL 38/43] iotests.py: Add skip_for_formats() decorator Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 40/43] iotests/292: data_file is unsupported Kevin Wolf
` (5 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
qed does not support shrinking images, so the test_small_target method
should be skipped to keep 041 passing.
Fixes: 16cea4ee1c8e5a69a058e76f426b2e17974d8d7d
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200617104822.27525-3-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/041 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tests/qemu-iotests/041 b/tests/qemu-iotests/041
index 601c756117..b843f88a66 100755
--- a/tests/qemu-iotests/041
+++ b/tests/qemu-iotests/041
@@ -277,6 +277,8 @@ class TestSingleBlockdev(TestSingleDrive):
result = self.vm.run_job('job0')
self.assertEqual(result, 'Source and target image have different sizes')
+ # qed does not support shrinking
+ @iotests.skip_for_formats(('qed'))
def test_small_target(self):
self.do_test_target_size(self.image_len // 2)
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 40/43] iotests/292: data_file is unsupported
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (38 preceding siblings ...)
2020-06-17 14:49 ` [PULL 39/43] iotests/041: Skip test_small_target for qed Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 41/43] iotests/229: " Kevin Wolf
` (4 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Fixes: e4d7019e1a81c61de6a925c3ac5bb6e62ea21b29
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200617104822.27525-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/292 | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tests/qemu-iotests/292 b/tests/qemu-iotests/292
index a2de27cca4..83ab19231d 100755
--- a/tests/qemu-iotests/292
+++ b/tests/qemu-iotests/292
@@ -40,6 +40,11 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# We need qemu-img map to show the file where the data is allocated,
+# but with an external data file, it will show that instead of the
+# file we want to check. So just skip this test for external data
+# files.
+_unsupported_imgopts data_file
echo '### Create the backing image'
BACKING_IMG="$TEST_IMG.base"
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 41/43] iotests/229: data_file is unsupported
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (39 preceding siblings ...)
2020-06-17 14:49 ` [PULL 40/43] iotests/292: data_file is unsupported Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 42/43] iotests/{190,291}: compat=0.10 " Kevin Wolf
` (3 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Fixes: d89ac3cf305b28c024a76805a84d75c0ee1e786f
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200617104822.27525-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/229 | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tests/qemu-iotests/229 b/tests/qemu-iotests/229
index 99acb55ebb..89a5359f32 100755
--- a/tests/qemu-iotests/229
+++ b/tests/qemu-iotests/229
@@ -46,6 +46,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2 qed
_supported_proto file
_supported_os Linux
+# blkdebug can only inject errors on bs->file, so external data files
+# do not work with this test
+_unsupported_imgopts data_file
DEST_IMG="$TEST_DIR/d.$IMGFMT"
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 42/43] iotests/{190,291}: compat=0.10 is unsupported
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (40 preceding siblings ...)
2020-06-17 14:49 ` [PULL 41/43] iotests/229: " Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 14:49 ` [PULL 43/43] iotests: Add copyright line in qcow2.py Kevin Wolf
` (2 subsequent siblings)
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Max Reitz <mreitz@redhat.com>
Fixes: 5d72c68b49769c927e90b78af6d90f6a384b26ac
Fixes: cf2d1203dcfc2bf964453d83a2302231ce77f2dc
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200617104822.27525-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/190 | 2 ++
tests/qemu-iotests/291 | 2 ++
2 files changed, 4 insertions(+)
diff --git a/tests/qemu-iotests/190 b/tests/qemu-iotests/190
index fe630918e9..c22d8d64f9 100755
--- a/tests/qemu-iotests/190
+++ b/tests/qemu-iotests/190
@@ -41,6 +41,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
# See 178 for more extensive tests across more formats
_supported_fmt qcow2
_supported_proto file
+# compat=0.10 does not support bitmaps
+_unsupported_imgopts 'compat=0.10'
echo "== Huge file without bitmaps =="
echo
diff --git a/tests/qemu-iotests/291 b/tests/qemu-iotests/291
index 404f8521f7..28e4fb9b4d 100755
--- a/tests/qemu-iotests/291
+++ b/tests/qemu-iotests/291
@@ -39,6 +39,8 @@ _supported_fmt qcow2
_supported_proto file
_supported_os Linux
_require_command QEMU_NBD
+# compat=0.10 does not support bitmaps
+_unsupported_imgopts 'compat=0.10'
echo
echo "=== Initial image setup ==="
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 43/43] iotests: Add copyright line in qcow2.py
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (41 preceding siblings ...)
2020-06-17 14:49 ` [PULL 42/43] iotests/{190,291}: compat=0.10 " Kevin Wolf
@ 2020-06-17 14:49 ` Kevin Wolf
2020-06-17 15:48 ` [PULL 00/43] Block layer patches no-reply
2020-06-18 14:30 ` Peter Maydell
44 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-17 14:49 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, peter.maydell, qemu-devel
From: Eric Blake <eblake@redhat.com>
The file qcow2.py was originally contributed in 2012 by Kevin Wolf,
but was not given traditional boilerplate headers at the time. The
missing license was just rectified (commit 16306a7b39) using the
project-default GPLv2+, but as Vladimir is not at Red Hat, he did not
add a Copyright line. All earlier contributions have come from CC'd
authors, where all but Stefan used a Red Hat address at the time of
the contribution, and that copyright carries over to the split to
qcow2_format.py (d5262c7124).
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Philippe Mathieu-Daudé <philmd@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200609205944.3549240-1-eblake@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/qcow2.py | 2 ++
tests/qemu-iotests/qcow2_format.py | 1 +
2 files changed, 3 insertions(+)
diff --git a/tests/qemu-iotests/qcow2.py b/tests/qemu-iotests/qcow2.py
index 8c187e9a72..0910e6ac07 100755
--- a/tests/qemu-iotests/qcow2.py
+++ b/tests/qemu-iotests/qcow2.py
@@ -2,6 +2,8 @@
#
# Manipulations with qcow2 image
#
+# Copyright (C) 2012 Red Hat, Inc.
+#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
diff --git a/tests/qemu-iotests/qcow2_format.py b/tests/qemu-iotests/qcow2_format.py
index 0f65fd161d..cc432e7ae0 100644
--- a/tests/qemu-iotests/qcow2_format.py
+++ b/tests/qemu-iotests/qcow2_format.py
@@ -1,6 +1,7 @@
# Library for manipulations with qcow2 image
#
# Copyright (c) 2020 Virtuozzo International GmbH.
+# Copyright (C) 2012 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
--
2.25.4
^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: [PULL 00/43] Block layer patches
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (42 preceding siblings ...)
2020-06-17 14:49 ` [PULL 43/43] iotests: Add copyright line in qcow2.py Kevin Wolf
@ 2020-06-17 15:48 ` no-reply
2020-06-18 14:30 ` Peter Maydell
44 siblings, 0 replies; 48+ messages in thread
From: no-reply @ 2020-06-17 15:48 UTC (permalink / raw)
To: kwolf; +Cc: kwolf, peter.maydell, qemu-devel, qemu-block
Patchew URL: https://patchew.org/QEMU/20200617144909.192176-1-kwolf@redhat.com/
Hi,
This series failed the asan build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1
=== TEST SCRIPT END ===
LINK tests/qemu-iotests/socket_scm_helper
GEN docs/interop/qemu-qmp-ref.html
GEN docs/interop/qemu-qmp-ref.txt
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
GEN docs/interop/qemu-qmp-ref.7
CC qga/commands.o
CC qga/guest-agent-command-state.o
---
CC qemu-img.o
AS pc-bios/optionrom/pvh.o
CC pc-bios/optionrom/pvh_main.o
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
BUILD pc-bios/optionrom/multiboot.img
BUILD pc-bios/optionrom/linuxboot.img
BUILD pc-bios/optionrom/kvmvapic.img
---
BUILD pc-bios/optionrom/pvh.raw
SIGN pc-bios/optionrom/pvh.bin
LINK fsdev/virtfs-proxy-helper
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK scsi/qemu-pr-helper
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
AR libvhost-user.a
LINK qemu-bridge-helper
GEN docs/interop/qemu-ga-ref.txt
GEN docs/interop/qemu-ga-ref.7
GEN docs/interop/qemu-ga-ref.html
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK qemu-ga
LINK qemu-keymap
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK ivshmem-client
LINK ivshmem-server
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK qemu-nbd
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK qemu-storage-daemon
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK qemu-img
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
LINK virtiofsd
LINK vhost-user-input
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
/usr/bin/ld: /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors_vfork.S.o): warning: common of `__interception::real_vfork' overridden by definition from /usr/lib64/clang/10.0.0/lib/linux/libclang_rt.asan-x86_64.a(asan_interceptors.cpp.o)
GEN x86_64-softmmu/config-devices.h
GEN x86_64-softmmu/hmp-commands.h
GEN x86_64-softmmu/hmp-commands-info.h
---
CC x86_64-softmmu/hw/display/virtio-gpu-3d.o
CC x86_64-softmmu/hw/display/vhost-user-gpu.o
CC x86_64-softmmu/hw/display/virtio-gpu-pci.o
/tmp/qemu-test/src/fpu/softfloat.c:3365:13: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:3423:18: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
absZ0 &= ~ ( ( (uint64_t) ( absZ1<<1 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:3483:18: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
absZ0 &= ~(((uint64_t)(absZ1<<1) == 0) & roundNearestEven);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:3606:13: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:3760:13: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:3987:21: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:4003:22: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
zSig0 &= ~ ( ( (uint64_t) ( zSig1<<1 ) == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
/tmp/qemu-test/src/fpu/softfloat.c:4273:18: error: bitwise negation of a boolean expression; did you mean logical negation? [-Werror,-Wbool-operation]
zSig1 &= ~ ( ( zSig2 + zSig2 == 0 ) & roundNearestEven );
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!
8 errors generated.
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: fpu/softfloat.o] Error 1
make[1]: *** Waiting for unfinished jobs....
/tmp/qemu-test/src/migration/ram.c:919:45: error: implicit conversion from 'unsigned long' to 'double' changes value from 18446744073709551615 to 18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
xbzrle_counters.encoding_rate = UINT64_MAX;
~ ^~~~~~~~~~
/usr/include/stdint.h:130:23: note: expanded from macro 'UINT64_MAX'
---
18446744073709551615UL
^~~~~~~~~~~~~~~~~~~~~~
1 error generated.
make[1]: *** [/tmp/qemu-test/src/rules.mak:69: migration/ram.o] Error 1
make: *** [Makefile:527: x86_64-softmmu/all] Error 2
Traceback (most recent call last):
File "./tests/docker/docker.py", line 669, in <module>
sys.exit(main())
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=ecde33fcb447459dba264151196412fa', '-u', '1003', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=x86_64-softmmu', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew2/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-3f4xzswk/src/docker-src.2020-06-17-11.44.22.15375:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-debug']' returned non-zero exit status 2.
filter=--filter=label=com.qemu.instance.uuid=ecde33fcb447459dba264151196412fa
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-3f4xzswk/src'
make: *** [docker-run-test-debug@fedora] Error 2
real 4m16.507s
user 0m7.992s
The full log is available at
http://patchew.org/logs/20200617144909.192176-1-kwolf@redhat.com/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/43] Block layer patches
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
` (43 preceding siblings ...)
2020-06-17 15:48 ` [PULL 00/43] Block layer patches no-reply
@ 2020-06-18 14:30 ` Peter Maydell
2020-06-25 8:39 ` Klaus Jensen
44 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2020-06-18 14:30 UTC (permalink / raw)
To: Kevin Wolf; +Cc: QEMU Developers, Qemu-block
On Wed, 17 Jun 2020 at 15:49, Kevin Wolf <kwolf@redhat.com> wrote:
>
> The following changes since commit 5c24bce3056ff209a1ecc50ff4b7e65b85ad8e74:
>
> Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging (2020-06-16 14:57:15 +0100)
>
> are available in the Git repository at:
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to 3419ec713f04c323b030e0763459435335b25476:
>
> iotests: Add copyright line in qcow2.py (2020-06-17 16:21:21 +0200)
>
> ----------------------------------------------------------------
> Block layer patches:
>
> - enhance handling of size-related BlockConf properties
> - nvme: small fixes, refactoring and cleanups
> - virtio-blk: On restart, process queued requests in the proper context
> - icount: make dma reads deterministic
> - iotests: Some fixes for rarely run cases
> - .gitignore: Ignore storage-daemon files
> - Minor code cleanups
>
> ----------------------------------------------------------------
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/43] Block layer patches
2020-06-18 14:30 ` Peter Maydell
@ 2020-06-25 8:39 ` Klaus Jensen
2020-06-25 10:39 ` Kevin Wolf
0 siblings, 1 reply; 48+ messages in thread
From: Klaus Jensen @ 2020-06-25 8:39 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Peter Maydell, QEMU Developers, Qemu-block
On Jun 18 15:30, Peter Maydell wrote:
> On Wed, 17 Jun 2020 at 15:49, Kevin Wolf <kwolf@redhat.com> wrote:
> >
> > The following changes since commit 5c24bce3056ff209a1ecc50ff4b7e65b85ad8e74:
> >
> > Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging (2020-06-16 14:57:15 +0100)
> >
> > are available in the Git repository at:
> >
> > git://repo.or.cz/qemu/kevin.git tags/for-upstream
> >
> > for you to fetch changes up to 3419ec713f04c323b030e0763459435335b25476:
> >
> > iotests: Add copyright line in qcow2.py (2020-06-17 16:21:21 +0200)
> >
> > ----------------------------------------------------------------
> > Block layer patches:
> >
> > - enhance handling of size-related BlockConf properties
> > - nvme: small fixes, refactoring and cleanups
> > - virtio-blk: On restart, process queued requests in the proper context
> > - icount: make dma reads deterministic
> > - iotests: Some fixes for rarely run cases
> > - .gitignore: Ignore storage-daemon files
> > - Minor code cleanups
> >
> > ----------------------------------------------------------------
>
>
> Applied, thanks.
>
> Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
> for any user-visible changes.
>
Kevin, can you add soemthing like the following to the changelog under
"Block devices"?
Emulated NVMe device (hw/block/nvme):
* Add the max_ioqpairs device parameter. The parameter specifies the
maximum number of supported I/O queue pairs and should be used
instead of the num_queues parameter. num_queues is not formally
deprecated, but the device will issue a warning if used. If neither
num_queues or max_ioqpairs are specified, device behavior is
unchanged from the previous default.
* Add the msix_qsize parameter. The parameter specifies the maximum
number of msix interrupt vectors supported by the device. If not
specified, device behavior is unchanged from the previous default.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/43] Block layer patches
2020-06-25 8:39 ` Klaus Jensen
@ 2020-06-25 10:39 ` Kevin Wolf
0 siblings, 0 replies; 48+ messages in thread
From: Kevin Wolf @ 2020-06-25 10:39 UTC (permalink / raw)
To: Klaus Jensen; +Cc: Peter Maydell, QEMU Developers, Qemu-block
Am 25.06.2020 um 10:39 hat Klaus Jensen geschrieben:
> On Jun 18 15:30, Peter Maydell wrote:
> > On Wed, 17 Jun 2020 at 15:49, Kevin Wolf <kwolf@redhat.com> wrote:
> > >
> > > The following changes since commit 5c24bce3056ff209a1ecc50ff4b7e65b85ad8e74:
> > >
> > > Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugin-160620-2' into staging (2020-06-16 14:57:15 +0100)
> > >
> > > are available in the Git repository at:
> > >
> > > git://repo.or.cz/qemu/kevin.git tags/for-upstream
> > >
> > > for you to fetch changes up to 3419ec713f04c323b030e0763459435335b25476:
> > >
> > > iotests: Add copyright line in qcow2.py (2020-06-17 16:21:21 +0200)
> > >
> > > ----------------------------------------------------------------
> > > Block layer patches:
> > >
> > > - enhance handling of size-related BlockConf properties
> > > - nvme: small fixes, refactoring and cleanups
> > > - virtio-blk: On restart, process queued requests in the proper context
> > > - icount: make dma reads deterministic
> > > - iotests: Some fixes for rarely run cases
> > > - .gitignore: Ignore storage-daemon files
> > > - Minor code cleanups
> > >
> > > ----------------------------------------------------------------
> >
> >
> > Applied, thanks.
> >
> > Please update the changelog at https://wiki.qemu.org/ChangeLog/5.1
> > for any user-visible changes.
> >
>
> Kevin, can you add soemthing like the following to the changelog under
> "Block devices"?
>
> Emulated NVMe device (hw/block/nvme):
>
> * Add the max_ioqpairs device parameter. The parameter specifies the
> maximum number of supported I/O queue pairs and should be used
> instead of the num_queues parameter. num_queues is not formally
> deprecated, but the device will issue a warning if used. If neither
> num_queues or max_ioqpairs are specified, device behavior is
> unchanged from the previous default.
>
> * Add the msix_qsize parameter. The parameter specifies the maximum
> number of msix interrupt vectors supported by the device. If not
> specified, device behavior is unchanged from the previous default.
Sure, I've added this.
If you want to have a wiki account so that you can edit the page
yourself in the future, let me (or anyone else with a wiki account) know
your preferred user name and we can create an account for you. Access is
not supposed to be a privileged thing, we just require manual
registration through an existing account to avoid spam.
Kevin
^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2020-06-25 10:40 UTC | newest]
Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-17 14:48 [PULL 00/43] Block layer patches Kevin Wolf
2020-06-17 14:48 ` [PULL 01/43] hw/ide: Make IDEDMAOps handlers take a const IDEDMA pointer Kevin Wolf
2020-06-17 14:48 ` [PULL 02/43] icount: make dma reads deterministic Kevin Wolf
2020-06-17 14:48 ` [PULL 03/43] virtio-blk: Refactor the code that processes queued requests Kevin Wolf
2020-06-17 14:48 ` [PULL 04/43] virtio-blk: On restart, process queued requests in the proper context Kevin Wolf
2020-06-17 14:48 ` [PULL 05/43] block: Refactor subdirectory recursion during make Kevin Wolf
2020-06-17 14:48 ` [PULL 06/43] qcow2: Tweak comments on qcow2_get_persistent_dirty_bitmap_size Kevin Wolf
2020-06-17 14:48 ` [PULL 07/43] hw/block/nvme: fix pci doorbell size calculation Kevin Wolf
2020-06-17 14:48 ` [PULL 08/43] hw/block/nvme: rename trace events to pci_nvme Kevin Wolf
2020-06-17 14:48 ` [PULL 09/43] hw/block/nvme: remove superfluous breaks Kevin Wolf
2020-06-17 14:48 ` [PULL 10/43] hw/block/nvme: move device parameters to separate struct Kevin Wolf
2020-06-17 14:48 ` [PULL 11/43] hw/block/nvme: use constants in identify Kevin Wolf
2020-06-17 14:48 ` [PULL 12/43] hw/block/nvme: refactor nvme_addr_read Kevin Wolf
2020-06-17 14:48 ` [PULL 13/43] hw/block/nvme: fix pin-based interrupt behavior Kevin Wolf
2020-06-17 14:48 ` [PULL 14/43] hw/block/nvme: add max_ioqpairs device parameter Kevin Wolf
2020-06-17 14:48 ` [PULL 15/43] hw/block/nvme: remove redundant cmbloc/cmbsz members Kevin Wolf
2020-06-17 14:48 ` [PULL 16/43] hw/block/nvme: factor out property/constraint checks Kevin Wolf
2020-06-17 14:48 ` [PULL 17/43] hw/block/nvme: factor out device state setup Kevin Wolf
2020-06-17 14:48 ` [PULL 18/43] hw/block/nvme: factor out block backend setup Kevin Wolf
2020-06-17 14:48 ` [PULL 19/43] hw/block/nvme: add namespace helpers Kevin Wolf
2020-06-17 14:48 ` [PULL 20/43] hw/block/nvme: factor out namespace setup Kevin Wolf
2020-06-17 14:48 ` [PULL 21/43] hw/block/nvme: factor out pci setup Kevin Wolf
2020-06-17 14:48 ` [PULL 22/43] hw/block/nvme: factor out cmb setup Kevin Wolf
2020-06-17 14:48 ` [PULL 23/43] hw/block/nvme: factor out pmr setup Kevin Wolf
2020-06-17 14:48 ` [PULL 24/43] hw/block/nvme: do cmb/pmr init as part of pci init Kevin Wolf
2020-06-17 14:48 ` [PULL 25/43] hw/block/nvme: factor out controller identify setup Kevin Wolf
2020-06-17 14:48 ` [PULL 26/43] hw/block/nvme: Verify msix_vector_use() returned value Kevin Wolf
2020-06-17 14:48 ` [PULL 27/43] hw/block/nvme: add msix_qsize parameter Kevin Wolf
2020-06-17 14:48 ` [PULL 28/43] hw/block/nvme: verify msix_init_exclusive_bar() return value Kevin Wolf
2020-06-17 14:48 ` [PULL 29/43] .gitignore: Ignore storage-daemon files Kevin Wolf
2020-06-17 14:48 ` [PULL 30/43] virtio-blk: store opt_io_size with correct size Kevin Wolf
2020-06-17 14:48 ` [PULL 31/43] block: consolidate blocksize properties consistency checks Kevin Wolf
2020-06-17 14:48 ` [PULL 32/43] qdev-properties: blocksize: use same limits in code and description Kevin Wolf
2020-06-17 14:48 ` [PULL 33/43] qdev-properties: add size32 property type Kevin Wolf
2020-06-17 14:49 ` [PULL 34/43] qdev-properties: make blocksize accept size suffixes Kevin Wolf
2020-06-17 14:49 ` [PULL 35/43] block: make BlockConf size props 32bit and " Kevin Wolf
2020-06-17 14:49 ` [PULL 36/43] qdev-properties: add getter for size32 and blocksize Kevin Wolf
2020-06-17 14:49 ` [PULL 37/43] block: lift blocksize property limit to 2 MiB Kevin Wolf
2020-06-17 14:49 ` [PULL 38/43] iotests.py: Add skip_for_formats() decorator Kevin Wolf
2020-06-17 14:49 ` [PULL 39/43] iotests/041: Skip test_small_target for qed Kevin Wolf
2020-06-17 14:49 ` [PULL 40/43] iotests/292: data_file is unsupported Kevin Wolf
2020-06-17 14:49 ` [PULL 41/43] iotests/229: " Kevin Wolf
2020-06-17 14:49 ` [PULL 42/43] iotests/{190,291}: compat=0.10 " Kevin Wolf
2020-06-17 14:49 ` [PULL 43/43] iotests: Add copyright line in qcow2.py Kevin Wolf
2020-06-17 15:48 ` [PULL 00/43] Block layer patches no-reply
2020-06-18 14:30 ` Peter Maydell
2020-06-25 8:39 ` Klaus Jensen
2020-06-25 10:39 ` Kevin Wolf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).