[RFC PATCH v4 0/5] util/vfio-helpers: Add support for multiple IRQs

[RFC PATCH v4 0/5] util/vfio-helpers: Add support for multiple IRQs

[Philippe Mathieu-Daudé]

This series intends to setup the VFIO helper to allow
binding notifiers on different IRQs.

For the NVMe use case, we only care about MSIX interrupts.
To not disrupt other users, introduce the qemu_vfio_pci_init_msix_irqs
function to initialize multiple MSIX IRQs and attach eventfd to
them.

Since RFC v3:
- addressed Alex and Stefan review comments

Since RFC v2:
- new patch to report vfio-helpers is not supported on AA64/POWER

(NVMe block driver series will follow).

Based-on: <20200812185014.18267-1-philmd@redhat.com>
"block/nvme: Various cleanups required to use multiple queues"
https://www.mail-archive.com/qemu-devel@nongnu.org/msg729395.html

Philippe Mathieu-Daudé (5):
  block/nvme: Use an array of EventNotifier
  util/vfio-helpers: Improve reporting unsupported IOMMU type
  util/vfio-helpers: Report error when IOMMU page size is not supported
  util/vfio-helpers: Introduce qemu_vfio_pci_init_msix_irqs()
  block/nvme: Use qemu_vfio_pci_init_msix_irqs() to initialize our IRQ

 include/qemu/vfio-helpers.h |  2 +
 block/nvme.c                | 38 ++++++++++++------
 util/vfio-helpers.c         | 79 ++++++++++++++++++++++++++++++++++++-
 3 files changed, 107 insertions(+), 12 deletions(-)

-- 
2.26.2

[RFC PATCH v4 1/5] block/nvme: Use an array of EventNotifier

[Philippe Mathieu-Daudé]

In preparation of using multiple IRQ (thus multiple eventfds)
make BDRVNVMeState::irq_notifier an array (for now of a single
element, the admin queue notifier).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 block/nvme.c | 31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/block/nvme.c b/block/nvme.c
index a61e86a83eb..fe8a40b7ede 100644
--- a/block/nvme.c
+++ b/block/nvme.c
@@ -106,6 +106,12 @@ QEMU_BUILD_BUG_ON(offsetof(NVMeRegs, doorbells) != 0x1000);
 #define INDEX_ADMIN     0
 #define INDEX_IO(n)     (1 + n)
 
+/* This driver shares a single MSIX IRQ for the admin and I/O queues */
+enum {
+    MSIX_SHARED_IRQ_IDX = 0,
+    MSIX_IRQ_COUNT = 1
+};
+
 struct BDRVNVMeState {
     AioContext *aio_context;
     QEMUVFIOState *vfio;
@@ -120,7 +126,7 @@ struct BDRVNVMeState {
     /* How many uint32_t elements does each doorbell entry take. */
     size_t doorbell_scale;
     bool write_cache_supported;
-    EventNotifier irq_notifier;
+    EventNotifier irq_notifier[MSIX_IRQ_COUNT];
 
     uint64_t nsze; /* Namespace size reported by identify command */
     int nsid;      /* The namespace id to read/write data. */
@@ -631,7 +637,8 @@ static bool nvme_poll_queues(BDRVNVMeState *s)
 
 static void nvme_handle_event(EventNotifier *n)
 {
-    BDRVNVMeState *s = container_of(n, BDRVNVMeState, irq_notifier);
+    BDRVNVMeState *s = container_of(n, BDRVNVMeState,
+                                    irq_notifier[MSIX_SHARED_IRQ_IDX]);
 
     trace_nvme_handle_event(s);
     event_notifier_test_and_clear(n);
@@ -683,7 +690,8 @@ out_error:
 static bool nvme_poll_cb(void *opaque)
 {
     EventNotifier *e = opaque;
-    BDRVNVMeState *s = container_of(e, BDRVNVMeState, irq_notifier);
+    BDRVNVMeState *s = container_of(e, BDRVNVMeState,
+                                    irq_notifier[MSIX_SHARED_IRQ_IDX]);
 
     trace_nvme_poll_cb(s);
     return nvme_poll_queues(s);
@@ -705,7 +713,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
     s->device = g_strdup(device);
     s->nsid = namespace;
     s->aio_context = bdrv_get_aio_context(bs);
-    ret = event_notifier_init(&s->irq_notifier, 0);
+    ret = event_notifier_init(&s->irq_notifier[MSIX_SHARED_IRQ_IDX], 0);
     if (ret) {
         error_setg(errp, "Failed to init event notifier");
         return ret;
@@ -784,12 +792,13 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
         }
     }
 
-    ret = qemu_vfio_pci_init_irq(s->vfio, &s->irq_notifier,
+    ret = qemu_vfio_pci_init_irq(s->vfio, s->irq_notifier,
                                  VFIO_PCI_MSIX_IRQ_INDEX, errp);
     if (ret) {
         goto out;
     }
-    aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
+    aio_set_event_notifier(bdrv_get_aio_context(bs),
+                           &s->irq_notifier[MSIX_SHARED_IRQ_IDX],
                            false, nvme_handle_event, nvme_poll_cb);
 
     nvme_identify(bs, namespace, &local_err);
@@ -872,9 +881,10 @@ static void nvme_close(BlockDriverState *bs)
         nvme_free_queue_pair(s->queues[i]);
     }
     g_free(s->queues);
-    aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
+    aio_set_event_notifier(bdrv_get_aio_context(bs),
+                           &s->irq_notifier[MSIX_SHARED_IRQ_IDX],
                            false, NULL, NULL);
-    event_notifier_cleanup(&s->irq_notifier);
+    event_notifier_cleanup(&s->irq_notifier[MSIX_SHARED_IRQ_IDX]);
     qemu_vfio_pci_unmap_bar(s->vfio, 0, (void *)s->regs, 0, NVME_BAR_SIZE);
     qemu_vfio_close(s->vfio);
 
@@ -1381,7 +1391,8 @@ static void nvme_detach_aio_context(BlockDriverState *bs)
         q->completion_bh = NULL;
     }
 
-    aio_set_event_notifier(bdrv_get_aio_context(bs), &s->irq_notifier,
+    aio_set_event_notifier(bdrv_get_aio_context(bs),
+                           &s->irq_notifier[MSIX_SHARED_IRQ_IDX],
                            false, NULL, NULL);
 }
 
@@ -1391,7 +1402,7 @@ static void nvme_attach_aio_context(BlockDriverState *bs,
     BDRVNVMeState *s = bs->opaque;
 
     s->aio_context = new_context;
-    aio_set_event_notifier(new_context, &s->irq_notifier,
+    aio_set_event_notifier(new_context, &s->irq_notifier[MSIX_SHARED_IRQ_IDX],
                            false, nvme_handle_event, nvme_poll_cb);
 
     for (int i = 0; i < s->nr_queues; i++) {
-- 
2.26.2

[RFC PATCH v4 2/5] util/vfio-helpers: Improve reporting unsupported IOMMU type

[Philippe Mathieu-Daudé]

Change the confuse "VFIO IOMMU check failed" error message by
the explicit "VFIO IOMMU Type1 is not supported" once.

Example on POWER:

 $ qemu-system-ppc64 -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw
 qemu-system-ppc64: -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw: VFIO IOMMU Type1 is not supported

Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 util/vfio-helpers.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
index e399e330e26..9a83e6084e5 100644
--- a/util/vfio-helpers.c
+++ b/util/vfio-helpers.c
@@ -261,7 +261,7 @@ static int qemu_vfio_init_pci(QEMUVFIOState *s, const char *device,
     }
 
     if (!ioctl(s->container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) {
-        error_setg_errno(errp, errno, "VFIO IOMMU check failed");
+        error_setg_errno(errp, errno, "VFIO IOMMU Type1 is not supported");
         ret = -EINVAL;
         goto fail_container;
     }
-- 
2.26.2

[RFC PATCH v4 3/5] util/vfio-helpers: Report error when IOMMU page size is not supported

[Philippe Mathieu-Daudé]

This driver uses the host page size to align its memory regions,
but this size is not always compatible with the IOMMU. Add a
check if the size matches, and bails out with listing the sizes
the IOMMU supports.

Example on Aarch64:

 $ qemu-system-aarch64 -M virt -drive if=none,id=nvme0,file=nvme://0006:90:00.0/1,format=raw
 qemu-system-aarch64: -drive if=none,id=nvme0,file=nvme://0006:90:00.0/1,format=raw: Unsupported IOMMU page size: 4 KiB
 Available page size:
  64 KiB
  512 MiB

Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 util/vfio-helpers.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
index 9a83e6084e5..8f4a3d452ed 100644
--- a/util/vfio-helpers.c
+++ b/util/vfio-helpers.c
@@ -11,6 +11,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/cutils.h"
 #include <sys/ioctl.h>
 #include <linux/vfio.h>
 #include "qapi/error.h"
@@ -316,6 +317,25 @@ static int qemu_vfio_init_pci(QEMUVFIOState *s, const char *device,
         ret = -errno;
         goto fail;
     }
+    if (!(iommu_info.flags & VFIO_IOMMU_INFO_PGSIZES)) {
+        error_setg(errp, "Failed to get IOMMU page size info");
+        ret = -errno;
+        goto fail;
+    }
+    if (!extract64(iommu_info.iova_pgsizes,
+                   ctz64(qemu_real_host_page_size), 1)) {
+        g_autofree char *host_page_size = size_to_str(qemu_real_host_page_size);
+        error_setg(errp, "Unsupported IOMMU page size: %s", host_page_size);
+        error_append_hint(errp, "Available page size:\n");
+        for (int i = 0; i < 64; i++) {
+            if (extract64(iommu_info.iova_pgsizes, i, 1)) {
+                g_autofree char *iova_pgsizes = size_to_str(1UL << i);
+                error_append_hint(errp, " %s\n", iova_pgsizes);
+            }
+        }
+        ret = -EINVAL;
+        goto fail;
+    }
 
     s->device = ioctl(s->group, VFIO_GROUP_GET_DEVICE_FD, device);
 
-- 
2.26.2

[RFC PATCH v4 4/5] util/vfio-helpers: Introduce qemu_vfio_pci_init_msix_irqs()

[Philippe Mathieu-Daudé]

qemu_vfio_pci_init_irq() allows us to initialize any type of IRQ,
but only one. Introduce qemu_vfio_pci_init_msix_irqs() which is
specific to MSIX IRQ type, and allow us to use multiple IRQs
(thus passing multiple eventfd notifiers).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/qemu/vfio-helpers.h |  2 ++
 util/vfio-helpers.c         | 57 +++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
index 1f057c2b9e4..8e6bd83ea41 100644
--- a/include/qemu/vfio-helpers.h
+++ b/include/qemu/vfio-helpers.h
@@ -28,5 +28,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar,
                              uint64_t offset, uint64_t size);
 int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
                            int irq_type, Error **errp);
+int qemu_vfio_pci_init_msix_irqs(QEMUVFIOState *s, EventNotifier *e,
+                                 unsigned *irq_count, Error **errp);
 
 #endif
diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
index 8f4a3d452ed..6f833972587 100644
--- a/util/vfio-helpers.c
+++ b/util/vfio-helpers.c
@@ -216,6 +216,63 @@ int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
     return 0;
 }
 
+/**
+ * Initialize device MSIX IRQs and register event notifiers.
+ * @irq_count: pointer to number of MSIX IRQs to initialize
+ * @notifier: Array of @irq_count notifiers (each corresponding to a MSIX IRQ)
+
+ * If the number of IRQs requested exceeds the available on the device,
+ * store the number of available IRQs in @irq_count and return -EOVERFLOW.
+ */
+int qemu_vfio_pci_init_msix_irqs(QEMUVFIOState *s, EventNotifier *notifier,
+                                 unsigned *irq_count, Error **errp)
+{
+    int r;
+    size_t irq_set_size;
+    struct vfio_irq_set *irq_set;
+    struct vfio_irq_info irq_info = {
+        .argsz = sizeof(irq_info),
+        .index = VFIO_PCI_MSIX_IRQ_INDEX
+    };
+
+    if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) {
+        error_setg_errno(errp, errno, "Failed to get device interrupt info");
+        return -errno;
+    }
+    if (irq_info.count < *irq_count) {
+        error_setg(errp, "Not enough device interrupts available");
+        *irq_count = irq_info.count;
+        return -EOVERFLOW;
+    }
+    if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
+        error_setg(errp, "Device interrupt doesn't support eventfd");
+        return -EINVAL;
+    }
+
+    irq_set_size = sizeof(*irq_set) + *irq_count * sizeof(int32_t);
+    irq_set = g_malloc0(irq_set_size);
+
+    /* Get to a known IRQ state */
+    *irq_set = (struct vfio_irq_set) {
+        .argsz = irq_set_size,
+        .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER,
+        .index = irq_info.index,
+        .start = 0,
+        .count = *irq_count,
+    };
+
+    for (unsigned i = 0; i < *irq_count; i++) {
+        ((int32_t *)&irq_set->data)[i] = event_notifier_get_fd(&notifier[i]);
+    }
+    r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set);
+    g_free(irq_set);
+    if (r) {
+        error_setg_errno(errp, errno, "Failed to setup device interrupts");
+        return -errno;
+    }
+    return 0;
+}
+
 static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf,
                                      int size, int ofs)
 {
-- 
2.26.2

[RFC PATCH v4 5/5] block/nvme: Use qemu_vfio_pci_init_msix_irqs() to initialize our IRQ

[Philippe Mathieu-Daudé]

Instead of initializing one MSIX IRQ with the generic
qemu_vfio_pci_init_irq() function, use the MSIX specific one which
ill allow us to use multiple IRQs. For now we provide an array of
a single IRQ.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 block/nvme.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/block/nvme.c b/block/nvme.c
index fe8a40b7ede..cafa2cb3f95 100644
--- a/block/nvme.c
+++ b/block/nvme.c
@@ -707,6 +707,7 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
     uint64_t timeout_ms;
     uint64_t deadline, now;
     Error *local_err = NULL;
+    unsigned irq_count = MSIX_IRQ_COUNT;
 
     qemu_co_mutex_init(&s->dma_map_lock);
     qemu_co_queue_init(&s->dma_flush_queue);
@@ -792,9 +793,13 @@ static int nvme_init(BlockDriverState *bs, const char *device, int namespace,
         }
     }
 
-    ret = qemu_vfio_pci_init_irq(s->vfio, s->irq_notifier,
-                                 VFIO_PCI_MSIX_IRQ_INDEX, errp);
+    ret = qemu_vfio_pci_init_msix_irqs(s->vfio, s->irq_notifier,
+                                       &irq_count, errp);
     if (ret) {
+        if (ret == -EOVERFLOW) {
+            error_append_hint(errp, "%u IRQs requested but only %u available\n",
+                              MSIX_IRQ_COUNT, irq_count);
+        }
         goto out;
     }
     aio_set_event_notifier(bdrv_get_aio_context(bs),
-- 
2.26.2

Re: [RFC PATCH v4 4/5] util/vfio-helpers: Introduce qemu_vfio_pci_init_msix_irqs()

[Alex Williamson]

On Wed, 19 Aug 2020 18:03:17 +0200
Philippe Mathieu-Daudé <philmd@redhat.com> wrote:

> qemu_vfio_pci_init_irq() allows us to initialize any type of IRQ,
> but only one. Introduce qemu_vfio_pci_init_msix_irqs() which is
> specific to MSIX IRQ type, and allow us to use multiple IRQs
> (thus passing multiple eventfd notifiers).
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  include/qemu/vfio-helpers.h |  2 ++
>  util/vfio-helpers.c         | 57 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 59 insertions(+)
> 
> diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
> index 1f057c2b9e4..8e6bd83ea41 100644
> --- a/include/qemu/vfio-helpers.h
> +++ b/include/qemu/vfio-helpers.h
> @@ -28,5 +28,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar,
>                               uint64_t offset, uint64_t size);
>  int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
>                             int irq_type, Error **errp);
> +int qemu_vfio_pci_init_msix_irqs(QEMUVFIOState *s, EventNotifier *e,
> +                                 unsigned *irq_count, Error **errp);
>  
>  #endif
> diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
> index 8f4a3d452ed..6f833972587 100644
> --- a/util/vfio-helpers.c
> +++ b/util/vfio-helpers.c
> @@ -216,6 +216,63 @@ int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
>      return 0;
>  }
>  
> +/**
> + * Initialize device MSIX IRQs and register event notifiers.
> + * @irq_count: pointer to number of MSIX IRQs to initialize
> + * @notifier: Array of @irq_count notifiers (each corresponding to a MSIX IRQ)
> +
> + * If the number of IRQs requested exceeds the available on the device,
> + * store the number of available IRQs in @irq_count and return -EOVERFLOW.
> + */
> +int qemu_vfio_pci_init_msix_irqs(QEMUVFIOState *s, EventNotifier *notifier,
> +                                 unsigned *irq_count, Error **errp)
> +{
> +    int r;
> +    size_t irq_set_size;
> +    struct vfio_irq_set *irq_set;
> +    struct vfio_irq_info irq_info = {
> +        .argsz = sizeof(irq_info),
> +        .index = VFIO_PCI_MSIX_IRQ_INDEX
> +    };
> +
> +    if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) {
> +        error_setg_errno(errp, errno, "Failed to get device interrupt info");
> +        return -errno;
> +    }
> +    if (irq_info.count < *irq_count) {
> +        error_setg(errp, "Not enough device interrupts available");
> +        *irq_count = irq_info.count;
> +        return -EOVERFLOW;
> +    }
> +    if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
> +        error_setg(errp, "Device interrupt doesn't support eventfd");
> +        return -EINVAL;
> +    }
> +
> +    irq_set_size = sizeof(*irq_set) + *irq_count * sizeof(int32_t);
> +    irq_set = g_malloc0(irq_set_size);
> +
> +    /* Get to a known IRQ state */
> +    *irq_set = (struct vfio_irq_set) {
> +        .argsz = irq_set_size,
> +        .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER,
> +        .index = irq_info.index,
> +        .start = 0,
> +        .count = *irq_count,
> +    };
> +
> +    for (unsigned i = 0; i < *irq_count; i++) {
> +        ((int32_t *)&irq_set->data)[i] = event_notifier_get_fd(&notifier[i]);
> +    }
> +    r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set);
> +    g_free(irq_set);
> +    if (r) {
> +        error_setg_errno(errp, errno, "Failed to setup device interrupts");
> +        return -errno;

FWIW, the former irq_info.count check returns what the device is
capable of, the platform might only have limited vector space
available, therefore this ioctl can also return a value indicating the
number of vectors \actually\ available.  So if r > 0 you could return
it in *irq_count (which also makes me wonder if errno would be set in
that case).  Thanks,

Alex

> +    }
> +    return 0;
> +}
> +
>  static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf,
>                                       int size, int ofs)
>  {

Re: [RFC PATCH v4 1/5] block/nvme: Use an array of EventNotifier

[Stefan Hajnoczi]

[-- Attachment #1: Type: text/plain, Size: 477 bytes --]

On Wed, Aug 19, 2020 at 06:03:14PM +0200, Philippe Mathieu-Daudé wrote:
> In preparation of using multiple IRQ (thus multiple eventfds)
> make BDRVNVMeState::irq_notifier an array (for now of a single
> element, the admin queue notifier).
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
>  block/nvme.c | 31 +++++++++++++++++++++----------
>  1 file changed, 21 insertions(+), 10 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]