* [PULL 00/36] target-arm queue
@ 2020-09-14 14:06 Peter Maydell
2020-09-14 14:06 ` [PULL 01/36] hw/misc/a9scu: Do not allow invalid CPU count Peter Maydell
` (35 more replies)
0 siblings, 36 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Nuvoton new board models, and some more minor stuff. I also put
in the deprecation patches for unicore32 and lm32.
thanks
-- PMM
The following changes since commit a68694cd1f3e5448cca814ff39b871f9ebd71ed5:
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20200914' into staging (2020-09-14 12:18:58 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200914
for you to fetch changes up to dd44ae00fc5342ed99acb68ec3508f76a71d523a:
MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller (2020-09-14 14:27:08 +0100)
----------------------------------------------------------------
target-arm queue:
* hw/misc/a9scu: Do not allow invalid CPU count
* hw/misc/a9scu: Minor cleanups
* hw/timer/armv7m_systick: assert that board code set system_clock_scale
* decodetree: Improve identifier matching
* target/arm: Clean up neon fp insn size field decode
* target/arm: Remove KVM support for 32-bit Arm hosts
* hw/arm/mps2: New board models mps2-an386, mps2-an500
* Deprecate Unicore32 port
* Deprecate lm32 port
* target/arm: Count PMU events when MDCR.SPME is set
* hw/arm: versal-virt: Correct the tx/rx GEM clocks
* New Nuvoton iBMC board models npcm750-evb, quanta-gsj
* xlnx-zynqmp: implement ZynqMP CAN controllers
----------------------------------------------------------------
Aaron Lindsay (1):
target/arm: Count PMU events when MDCR.SPME is set
Edgar E. Iglesias (1):
hw/arm: versal-virt: Correct the tx/rx GEM clocks
Havard Skinnemoen (14):
hw/misc: Add NPCM7xx System Global Control Registers device model
hw/misc: Add NPCM7xx Clock Controller device model
hw/timer: Add NPCM7xx Timer device model
hw/arm: Add NPCM730 and NPCM750 SoC models
hw/arm: Add two NPCM7xx-based machines
roms: Add virtual Boot ROM for NPCM7xx SoCs
hw/arm: Load -bios image as a boot ROM for npcm7xx
hw/nvram: NPCM7xx OTP device model
hw/mem: Stubbed out NPCM7xx Memory Controller model
hw/ssi: NPCM7xx Flash Interface Unit device model
hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
docs/system: Add Nuvoton machine documentation
tests/acceptance: console boot tests for quanta-gsj
Peter Maydell (11):
hw/timer/armv7m_systick: assert that board code set system_clock_scale
target/arm: Convert Neon 3-same-fp size field to MO_* in decode
target/arm: Convert Neon VCVT fp size field to MO_* in decode
target/arm: Convert VCMLA, VCADD size field to MO_* in decode
target/arm: Remove KVM support for 32-bit Arm hosts
target/arm: Remove no-longer-reachable 32-bit KVM code
hw/arm/mps2: New board model mps2-an386
hw/arm/mps2: New board model mps2-an500
docs/system/arm/mps2.rst: Make board list consistent
Deprecate Unicore32 port
Deprecate lm32 port
Philippe Mathieu-Daudé (4):
hw/misc/a9scu: Do not allow invalid CPU count
hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields
hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields
hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)
Richard Henderson (1):
decodetree: Improve identifier matching
Vikram Garhwal (4):
hw/net/can: Introduce Xilinx ZynqMP CAN controller
xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers
tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller
MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller
docs/system/arm/mps2.rst | 20 +-
docs/system/arm/nuvoton.rst | 92 +++
docs/system/deprecated.rst | 32 +-
docs/system/target-arm.rst | 1 +
configure | 2 +-
default-configs/arm-softmmu.mak | 1 +
include/hw/arm/npcm7xx.h | 112 +++
include/hw/arm/xlnx-zynqmp.h | 8 +
include/hw/mem/npcm7xx_mc.h | 36 +
include/hw/misc/npcm7xx_clk.h | 48 ++
include/hw/misc/npcm7xx_gcr.h | 43 ++
include/hw/net/xlnx-zynqmp-can.h | 78 +++
include/hw/nvram/npcm7xx_otp.h | 79 +++
include/hw/ssi/npcm7xx_fiu.h | 73 ++
include/hw/timer/npcm7xx_timer.h | 78 +++
target/arm/kvm-consts.h | 7 -
target/arm/kvm_arm.h | 6 -
target/arm/neon-dp.decode | 18 +-
target/arm/neon-shared.decode | 18 +-
tests/decode/succ_ident1.decode | 7 +
hw/arm/mps2.c | 97 ++-
hw/arm/npcm7xx.c | 532 +++++++++++++++
hw/arm/npcm7xx_boards.c | 197 ++++++
hw/arm/xlnx-versal-virt.c | 2 +-
hw/arm/xlnx-zcu102.c | 20 +
hw/arm/xlnx-zynqmp.c | 34 +
hw/mem/npcm7xx_mc.c | 84 +++
hw/misc/a9scu.c | 59 +-
hw/misc/npcm7xx_clk.c | 266 ++++++++
hw/misc/npcm7xx_gcr.c | 269 ++++++++
hw/net/can/xlnx-zynqmp-can.c | 1165 ++++++++++++++++++++++++++++++++
hw/nvram/npcm7xx_otp.c | 440 ++++++++++++
hw/ssi/npcm7xx_fiu.c | 572 ++++++++++++++++
hw/timer/armv7m_systick.c | 8 +
hw/timer/npcm7xx_timer.c | 543 +++++++++++++++
target/arm/cpu.c | 101 ++-
target/arm/helper.c | 2 +-
target/arm/kvm.c | 7 -
target/arm/kvm32.c | 595 ----------------
tests/qtest/xlnx-can-test.c | 359 ++++++++++
.gitmodules | 3 +
MAINTAINERS | 18 +
hw/arm/Kconfig | 9 +
hw/arm/meson.build | 1 +
hw/mem/meson.build | 1 +
hw/misc/meson.build | 4 +
hw/misc/trace-events | 8 +
hw/net/can/meson.build | 1 +
hw/nvram/meson.build | 1 +
hw/ssi/meson.build | 1 +
hw/ssi/trace-events | 11 +
hw/timer/meson.build | 1 +
hw/timer/trace-events | 5 +
pc-bios/README | 6 +
pc-bios/meson.build | 1 +
pc-bios/npcm7xx_bootrom.bin | Bin 0 -> 768 bytes
roms/Makefile | 7 +
roms/vbootrom | 1 +
scripts/decodetree.py | 46 +-
target/arm/meson.build | 5 +-
target/arm/translate-neon.c.inc | 42 +-
tests/acceptance/boot_linux_console.py | 83 +++
tests/qtest/meson.build | 1 +
63 files changed, 5584 insertions(+), 783 deletions(-)
create mode 100644 docs/system/arm/nuvoton.rst
create mode 100644 include/hw/arm/npcm7xx.h
create mode 100644 include/hw/mem/npcm7xx_mc.h
create mode 100644 include/hw/misc/npcm7xx_clk.h
create mode 100644 include/hw/misc/npcm7xx_gcr.h
create mode 100644 include/hw/net/xlnx-zynqmp-can.h
create mode 100644 include/hw/nvram/npcm7xx_otp.h
create mode 100644 include/hw/ssi/npcm7xx_fiu.h
create mode 100644 include/hw/timer/npcm7xx_timer.h
create mode 100644 tests/decode/succ_ident1.decode
create mode 100644 hw/arm/npcm7xx.c
create mode 100644 hw/arm/npcm7xx_boards.c
create mode 100644 hw/mem/npcm7xx_mc.c
create mode 100644 hw/misc/npcm7xx_clk.c
create mode 100644 hw/misc/npcm7xx_gcr.c
create mode 100644 hw/net/can/xlnx-zynqmp-can.c
create mode 100644 hw/nvram/npcm7xx_otp.c
create mode 100644 hw/ssi/npcm7xx_fiu.c
create mode 100644 hw/timer/npcm7xx_timer.c
delete mode 100644 target/arm/kvm32.c
create mode 100644 tests/qtest/xlnx-can-test.c
create mode 100644 pc-bios/npcm7xx_bootrom.bin
create mode 160000 roms/vbootrom
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 01/36] hw/misc/a9scu: Do not allow invalid CPU count
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 02/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields Peter Maydell
` (34 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Per the datasheet (DDI0407 r2p0):
"The SCU connects one to four Cortex-A9 processors to
the memory system through the AXI interfaces."
Change the instance_init() handler to a device_realize()
one so we can verify the property is in range, and return
an error to the caller if not.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/a9scu.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/hw/misc/a9scu.c b/hw/misc/a9scu.c
index 324371a1c00..915f127761e 100644
--- a/hw/misc/a9scu.c
+++ b/hw/misc/a9scu.c
@@ -12,8 +12,11 @@
#include "hw/misc/a9scu.h"
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
+#include "qapi/error.h"
#include "qemu/module.h"
+#define A9_SCU_CPU_MAX 4
+
static uint64_t a9_scu_read(void *opaque, hwaddr offset,
unsigned size)
{
@@ -105,12 +108,17 @@ static void a9_scu_reset(DeviceState *dev)
s->control = 0;
}
-static void a9_scu_init(Object *obj)
+static void a9_scu_realize(DeviceState *dev, Error **errp)
{
- A9SCUState *s = A9_SCU(obj);
- SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+ A9SCUState *s = A9_SCU(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
- memory_region_init_io(&s->iomem, obj, &a9_scu_ops, s,
+ if (!s->num_cpu || s->num_cpu > A9_SCU_CPU_MAX) {
+ error_setg(errp, "Illegal CPU count: %u", s->num_cpu);
+ return;
+ }
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &a9_scu_ops, s,
"a9-scu", 0x100);
sysbus_init_mmio(sbd, &s->iomem);
}
@@ -138,13 +146,13 @@ static void a9_scu_class_init(ObjectClass *klass, void *data)
device_class_set_props(dc, a9_scu_properties);
dc->vmsd = &vmstate_a9_scu;
dc->reset = a9_scu_reset;
+ dc->realize = a9_scu_realize;
}
static const TypeInfo a9_scu_info = {
.name = TYPE_A9_SCU,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(A9SCUState),
- .instance_init = a9_scu_init,
.class_init = a9_scu_class_init,
};
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 02/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
2020-09-14 14:06 ` [PULL 01/36] hw/misc/a9scu: Do not allow invalid CPU count Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 03/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields Peter Maydell
` (33 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Per the datasheet (DDI0407 r2p0):
"All SCU registers are byte accessible" and are 32-bit aligned.
Set MemoryRegionOps::valid min/max fields and simplify the write()
handler.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/a9scu.c | 21 +++++----------------
1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/hw/misc/a9scu.c b/hw/misc/a9scu.c
index 915f127761e..3f3dcc414fe 100644
--- a/hw/misc/a9scu.c
+++ b/hw/misc/a9scu.c
@@ -52,23 +52,8 @@ static void a9_scu_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
A9SCUState *s = (A9SCUState *)opaque;
- uint32_t mask;
+ uint32_t mask = MAKE_64BIT_MASK(0, size * 8);
uint32_t shift;
- switch (size) {
- case 1:
- mask = 0xff;
- break;
- case 2:
- mask = 0xffff;
- break;
- case 4:
- mask = 0xffffffff;
- break;
- default:
- fprintf(stderr, "Invalid size %u in write to a9 scu register %x\n",
- size, (unsigned)offset);
- return;
- }
switch (offset) {
case 0x00: /* Control */
@@ -99,6 +84,10 @@ static void a9_scu_write(void *opaque, hwaddr offset,
static const MemoryRegionOps a9_scu_ops = {
.read = a9_scu_read,
.write = a9_scu_write,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
.endianness = DEVICE_NATIVE_ENDIAN,
};
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 03/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
2020-09-14 14:06 ` [PULL 01/36] hw/misc/a9scu: Do not allow invalid CPU count Peter Maydell
2020-09-14 14:06 ` [PULL 02/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 04/36] hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP) Peter Maydell
` (32 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
This model implementation is designed for 32-bit accesses.
We can simplify setting the MemoryRegionOps::impl min/max
fields to 32-bit (memory::access_with_adjusted_size() will
take care of the 8/16-bit accesses).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/a9scu.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/hw/misc/a9scu.c b/hw/misc/a9scu.c
index 3f3dcc414fe..47f948341f7 100644
--- a/hw/misc/a9scu.c
+++ b/hw/misc/a9scu.c
@@ -28,12 +28,6 @@ static uint64_t a9_scu_read(void *opaque, hwaddr offset,
return (((1 << s->num_cpu) - 1) << 4) | (s->num_cpu - 1);
case 0x08: /* CPU Power Status */
return s->status;
- case 0x09: /* CPU status. */
- return s->status >> 8;
- case 0x0a: /* CPU status. */
- return s->status >> 16;
- case 0x0b: /* CPU status. */
- return s->status >> 24;
case 0x0c: /* Invalidate All Registers In Secure State */
return 0;
case 0x40: /* Filtering Start Address Register */
@@ -52,8 +46,6 @@ static void a9_scu_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
A9SCUState *s = (A9SCUState *)opaque;
- uint32_t mask = MAKE_64BIT_MASK(0, size * 8);
- uint32_t shift;
switch (offset) {
case 0x00: /* Control */
@@ -62,9 +54,7 @@ static void a9_scu_write(void *opaque, hwaddr offset,
case 0x4: /* Configuration: RO */
break;
case 0x08: case 0x09: case 0x0A: case 0x0B: /* Power Control */
- shift = (offset - 0x8) * 8;
- s->status &= ~(mask << shift);
- s->status |= ((value & mask) << shift);
+ s->status = value;
break;
case 0x0c: /* Invalidate All Registers In Secure State */
/* no-op as we do not implement caches */
@@ -84,6 +74,10 @@ static void a9_scu_write(void *opaque, hwaddr offset,
static const MemoryRegionOps a9_scu_ops = {
.read = a9_scu_read,
.write = a9_scu_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
.valid = {
.min_access_size = 1,
.max_access_size = 4,
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 04/36] hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (2 preceding siblings ...)
2020-09-14 14:06 ` [PULL 03/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 05/36] hw/timer/armv7m_systick: assert that board code set system_clock_scale Peter Maydell
` (31 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Report unimplemented register accesses using qemu_log_mask(UNIMP).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200901144100.116742-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/misc/a9scu.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/hw/misc/a9scu.c b/hw/misc/a9scu.c
index 47f948341f7..a375ebc9878 100644
--- a/hw/misc/a9scu.c
+++ b/hw/misc/a9scu.c
@@ -13,6 +13,7 @@
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
+#include "qemu/log.h"
#include "qemu/module.h"
#define A9_SCU_CPU_MAX 4
@@ -38,6 +39,8 @@ static uint64_t a9_scu_read(void *opaque, hwaddr offset,
case 0x54: /* SCU Non-secure Access Control Register */
/* unimplemented, fall through */
default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx"\n",
+ __func__, offset);
return 0;
}
}
@@ -67,6 +70,9 @@ static void a9_scu_write(void *opaque, hwaddr offset,
case 0x54: /* SCU Non-secure Access Control Register */
/* unimplemented, fall through */
default:
+ qemu_log_mask(LOG_UNIMP, "%s: Unsupported offset 0x%"HWADDR_PRIx
+ " value 0x%"PRIx64"\n",
+ __func__, offset, value);
break;
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 05/36] hw/timer/armv7m_systick: assert that board code set system_clock_scale
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (3 preceding siblings ...)
2020-09-14 14:06 ` [PULL 04/36] hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP) Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 06/36] decodetree: Improve identifier matching Peter Maydell
` (30 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
It is the responsibility of board code for an armv7m system to set
system_clock_scale appropriately for the CPU speed of the core.
If it forgets to do this, then QEMU will hang if the guest tries
to use the systick timer in the "tick at the CPU clock frequency" mode.
We forgot that in a couple of our boards (see commits ce4f70e81ed23c93f,
e7e5a9595ab1136). Add an assertion in the systick reset method so
we don't let any new boards in with the same bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200825160847.18091-1-peter.maydell@linaro.org
---
hw/timer/armv7m_systick.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/hw/timer/armv7m_systick.c b/hw/timer/armv7m_systick.c
index 74c58bcf245..a8cec7eb56b 100644
--- a/hw/timer/armv7m_systick.c
+++ b/hw/timer/armv7m_systick.c
@@ -202,6 +202,14 @@ static void systick_reset(DeviceState *dev)
{
SysTickState *s = SYSTICK(dev);
+ /*
+ * Forgetting to set system_clock_scale is always a board code
+ * bug. We can't check this earlier because for some boards
+ * (like stellaris) it is not yet configured at the point where
+ * the systick device is realized.
+ */
+ assert(system_clock_scale != 0);
+
s->control = 0;
s->reload = 0;
s->tick = 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 06/36] decodetree: Improve identifier matching
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (4 preceding siblings ...)
2020-09-14 14:06 ` [PULL 05/36] hw/timer/armv7m_systick: assert that board code set system_clock_scale Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 07/36] target/arm: Convert Neon 3-same-fp size field to MO_* in decode Peter Maydell
` (29 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Richard Henderson <richard.henderson@linaro.org>
Only argument set members have to be C identifiers, everything
else gets prefixed during conversion to C. Some places just
checked the leading character, and some places matched a leading
character plus a C identifier.
Convert everything to match full identifiers, including the
[&%@&] prefix, and drop the full C identifier requirement.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903192334.1603773-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/decode/succ_ident1.decode | 7 +++++
scripts/decodetree.py | 46 +++++++++++++++++++++------------
2 files changed, 37 insertions(+), 16 deletions(-)
create mode 100644 tests/decode/succ_ident1.decode
diff --git a/tests/decode/succ_ident1.decode b/tests/decode/succ_ident1.decode
new file mode 100644
index 00000000000..f15cfbe1470
--- /dev/null
+++ b/tests/decode/succ_ident1.decode
@@ -0,0 +1,7 @@
+%1f 0:8
+%2f 8:8
+%3f 16:8
+
+&3arg a b c
+@3arg ........ ........ ........ ........ &3arg a=%1f b=%2f c=%3f
+3insn 00000000 ........ ........ ........ @3arg
diff --git a/scripts/decodetree.py b/scripts/decodetree.py
index 4cd1e109046..c02de9865b2 100644
--- a/scripts/decodetree.py
+++ b/scripts/decodetree.py
@@ -42,8 +42,14 @@ output_fd = None
insntype = 'uint32_t'
decode_function = 'decode'
-re_ident = '[a-zA-Z][a-zA-Z0-9_]*'
+# An identifier for C.
+re_C_ident = '[a-zA-Z][a-zA-Z0-9_]*'
+# Identifiers for Arguments, Fields, Formats and Patterns.
+re_arg_ident = '&[a-zA-Z0-9_]*'
+re_fld_ident = '%[a-zA-Z0-9_]*'
+re_fmt_ident = '@[a-zA-Z0-9_]*'
+re_pat_ident = '[a-zA-Z0-9_]*'
def error_with_file(file, lineno, *args):
"""Print an error message from file:line and args and exit."""
@@ -632,7 +638,6 @@ class ExcMultiPattern(MultiPattern):
def parse_field(lineno, name, toks):
"""Parse one instruction field from TOKS at LINENO"""
global fields
- global re_ident
global insnwidth
# A "simple" field will have only one entry;
@@ -641,7 +646,7 @@ def parse_field(lineno, name, toks):
width = 0
func = None
for t in toks:
- if re.fullmatch('!function=' + re_ident, t):
+ if re.match('^!function=', t):
if func:
error(lineno, 'duplicate function')
func = t.split('=')
@@ -695,7 +700,7 @@ def parse_field(lineno, name, toks):
def parse_arguments(lineno, name, toks):
"""Parse one argument set from TOKS at LINENO"""
global arguments
- global re_ident
+ global re_C_ident
global anyextern
flds = []
@@ -705,7 +710,7 @@ def parse_arguments(lineno, name, toks):
extern = True
anyextern = True
continue
- if not re.fullmatch(re_ident, t):
+ if not re.fullmatch(re_C_ident, t):
error(lineno, 'invalid argument set token "{0}"'.format(t))
if t in flds:
error(lineno, 'duplicate argument "{0}"'.format(t))
@@ -791,7 +796,10 @@ def parse_generic(lineno, parent_pat, name, toks):
global arguments
global formats
global allpatterns
- global re_ident
+ global re_arg_ident
+ global re_fld_ident
+ global re_fmt_ident
+ global re_C_ident
global insnwidth
global insnmask
global variablewidth
@@ -807,7 +815,7 @@ def parse_generic(lineno, parent_pat, name, toks):
fmt = None
for t in toks:
# '&Foo' gives a format an explcit argument set.
- if t[0] == '&':
+ if re.fullmatch(re_arg_ident, t):
tt = t[1:]
if arg:
error(lineno, 'multiple argument sets')
@@ -818,7 +826,7 @@ def parse_generic(lineno, parent_pat, name, toks):
continue
# '@Foo' gives a pattern an explicit format.
- if t[0] == '@':
+ if re.fullmatch(re_fmt_ident, t):
tt = t[1:]
if fmt:
error(lineno, 'multiple formats')
@@ -829,19 +837,19 @@ def parse_generic(lineno, parent_pat, name, toks):
continue
# '%Foo' imports a field.
- if t[0] == '%':
+ if re.fullmatch(re_fld_ident, t):
tt = t[1:]
flds = add_field_byname(lineno, flds, tt, tt)
continue
# 'Foo=%Bar' imports a field with a different name.
- if re.fullmatch(re_ident + '=%' + re_ident, t):
+ if re.fullmatch(re_C_ident + '=' + re_fld_ident, t):
(fname, iname) = t.split('=%')
flds = add_field_byname(lineno, flds, fname, iname)
continue
# 'Foo=number' sets an argument field to a constant value
- if re.fullmatch(re_ident + '=[+-]?[0-9]+', t):
+ if re.fullmatch(re_C_ident + '=[+-]?[0-9]+', t):
(fname, value) = t.split('=')
value = int(value)
flds = add_field(lineno, flds, fname, ConstField(value))
@@ -866,7 +874,7 @@ def parse_generic(lineno, parent_pat, name, toks):
fixedmask = (fixedmask << shift) | fms
undefmask = (undefmask << shift) | ubm
# Otherwise, fieldname:fieldwidth
- elif re.fullmatch(re_ident + ':s?[0-9]+', t):
+ elif re.fullmatch(re_C_ident + ':s?[0-9]+', t):
(fname, flen) = t.split(':')
sign = False
if flen[0] == 's':
@@ -971,6 +979,10 @@ def parse_generic(lineno, parent_pat, name, toks):
def parse_file(f, parent_pat):
"""Parse all of the patterns within a file"""
+ global re_arg_ident
+ global re_fld_ident
+ global re_fmt_ident
+ global re_pat_ident
# Read all of the lines of the file. Concatenate lines
# ending in backslash; discard empty lines and comments.
@@ -1063,14 +1075,16 @@ def parse_file(f, parent_pat):
continue
# Determine the type of object needing to be parsed.
- if name[0] == '%':
+ if re.fullmatch(re_fld_ident, name):
parse_field(start_lineno, name[1:], toks)
- elif name[0] == '&':
+ elif re.fullmatch(re_arg_ident, name):
parse_arguments(start_lineno, name[1:], toks)
- elif name[0] == '@':
+ elif re.fullmatch(re_fmt_ident, name):
parse_generic(start_lineno, None, name[1:], toks)
- else:
+ elif re.fullmatch(re_pat_ident, name):
parse_generic(start_lineno, parent_pat, name, toks)
+ else:
+ error(lineno, 'invalid token "{0}"'.format(name))
toks = []
if nesting != 0:
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 07/36] target/arm: Convert Neon 3-same-fp size field to MO_* in decode
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (5 preceding siblings ...)
2020-09-14 14:06 ` [PULL 06/36] decodetree: Improve identifier matching Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 08/36] target/arm: Convert Neon VCVT fp " Peter Maydell
` (28 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
In the Neon instructions, some instruction formats have a 2-bit size
field which corresponds exactly to QEMU's MO_8/16/32/64. However the
floating-point insns in the 3-same group have a 1-bit size field
which is "0 for 32-bit float and 1 for 16-bit float". Currently we
pass these values directly through to trans_ functions, which means
that when reading a particular trans_ function you need to know if
that insn uses a 2-bit size or a 1-bit size.
Move the handling of the 1-bit size to the decodetree file, so that
all these insns consistently pass a size to the trans_ function which
is an MO_8/16/32/64 value.
In this commit we switch over the insns using the 3same_fp and
3same_fp_q0 formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
---
target/arm/neon-dp.decode | 15 ++++++++++-----
target/arm/translate-neon.c.inc | 16 +++++++++++-----
2 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode
index 1e9e8592917..ea2f0dfcf16 100644
--- a/target/arm/neon-dp.decode
+++ b/target/arm/neon-dp.decode
@@ -45,11 +45,16 @@
@3same_q0 .... ... . . . size:2 .... .... .... . 0 . . .... \
&3same vm=%vm_dp vn=%vn_dp vd=%vd_dp q=0
-# For FP insns the high bit of 'size' is used as part of opcode decode
-@3same_fp .... ... . . . . size:1 .... .... .... . q:1 . . .... \
- &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp
-@3same_fp_q0 .... ... . . . . size:1 .... .... .... . 0 . . .... \
- &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp q=0
+# For FP insns the high bit of 'size' is used as part of opcode decode,
+# and the 'size' bit is 0 for 32-bit float and 1 for 16-bit float.
+# This converts this encoding to the same MO_8/16/32/64 values that the
+# integer neon insns use.
+%3same_fp_size 20:1 !function=neon_3same_fp_size
+
+@3same_fp .... ... . . . . . .... .... .... . q:1 . . .... \
+ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp size=%3same_fp_size
+@3same_fp_q0 .... ... . . . . . .... .... .... . 0 . . .... \
+ &3same vm=%vm_dp vn=%vn_dp vd=%vd_dp q=0 size=%3same_fp_size
VHADD_S_3s 1111 001 0 0 . .. .... .... 0000 . . . 0 .... @3same
VHADD_U_3s 1111 001 1 0 . .. .... .... 0000 . . . 0 .... @3same
diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc
index 2d4926316a4..255c1cf8a2a 100644
--- a/target/arm/translate-neon.c.inc
+++ b/target/arm/translate-neon.c.inc
@@ -49,6 +49,12 @@ static inline int rsub_8(DisasContext *s, int x)
return 8 - x;
}
+static inline int neon_3same_fp_size(DisasContext *s, int x)
+{
+ /* Convert 0==fp32, 1==fp16 into a MO_* value */
+ return MO_32 - x;
+}
+
/* Include the generated Neon decoder */
#include "decode-neon-dp.c.inc"
#include "decode-neon-ls.c.inc"
@@ -1049,7 +1055,7 @@ DO_3SAME_VQDMULH(VQRDMULH, qrdmulh)
WRAP_FP_GVEC(gen_##INSN##_fp16_3s, FPST_STD_F16, HFUNC) \
static bool trans_##INSN##_fp_3s(DisasContext *s, arg_3same *a) \
{ \
- if (a->size != 0) { \
+ if (a->size == MO_16) { \
if (!dc_isar_feature(aa32_fp16_arith, s)) { \
return false; \
} \
@@ -1088,7 +1094,7 @@ static bool trans_VMAXNM_fp_3s(DisasContext *s, arg_3same *a)
return false;
}
- if (a->size != 0) {
+ if (a->size == MO_16) {
if (!dc_isar_feature(aa32_fp16_arith, s)) {
return false;
}
@@ -1103,7 +1109,7 @@ static bool trans_VMINNM_fp_3s(DisasContext *s, arg_3same *a)
return false;
}
- if (a->size != 0) {
+ if (a->size == MO_16) {
if (!dc_isar_feature(aa32_fp16_arith, s)) {
return false;
}
@@ -1135,7 +1141,7 @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a,
assert(a->q == 0); /* enforced by decode patterns */
- fpstatus = fpstatus_ptr(a->size != 0 ? FPST_STD_F16 : FPST_STD);
+ fpstatus = fpstatus_ptr(a->size == MO_16 ? FPST_STD_F16 : FPST_STD);
tcg_gen_gvec_3_ptr(vfp_reg_offset(1, a->vd),
vfp_reg_offset(1, a->vn),
vfp_reg_offset(1, a->vm),
@@ -1152,7 +1158,7 @@ static bool do_3same_fp_pair(DisasContext *s, arg_3same *a,
#define DO_3S_FP_PAIR(INSN,FUNC) \
static bool trans_##INSN##_fp_3s(DisasContext *s, arg_3same *a) \
{ \
- if (a->size != 0) { \
+ if (a->size == MO_16) { \
if (!dc_isar_feature(aa32_fp16_arith, s)) { \
return false; \
} \
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 08/36] target/arm: Convert Neon VCVT fp size field to MO_* in decode
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (6 preceding siblings ...)
2020-09-14 14:06 ` [PULL 07/36] target/arm: Convert Neon 3-same-fp size field to MO_* in decode Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 09/36] target/arm: Convert VCMLA, VCADD " Peter Maydell
` (27 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats
to pass the size through to the trans function as a MO_* value
rather than the '0==f32, 1==f16' used in the fp 3-same encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
---
target/arm/neon-dp.decode | 3 +--
target/arm/translate-neon.c.inc | 4 ++--
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/target/arm/neon-dp.decode b/target/arm/neon-dp.decode
index ea2f0dfcf16..51aa0f08194 100644
--- a/target/arm/neon-dp.decode
+++ b/target/arm/neon-dp.decode
@@ -256,9 +256,8 @@ VMINNM_fp_3s 1111 001 1 0 . 1 . .... .... 1111 ... 1 .... @3same_fp
@2reg_shll_b .... ... . . . 001 shift:3 .... .... 0 . . . .... \
&2reg_shift vm=%vm_dp vd=%vd_dp size=0 q=0
-# We use size=0 for fp32 and size=1 for fp16 to match the 3-same encodings.
@2reg_vcvt .... ... . . . 1 ..... .... .... . q:1 . . .... \
- &2reg_shift vm=%vm_dp vd=%vd_dp size=0 shift=%neon_rshift_i5
+ &2reg_shift vm=%vm_dp vd=%vd_dp size=2 shift=%neon_rshift_i5
@2reg_vcvt_f16 .... ... . . . 11 .... .... .... . q:1 . . .... \
&2reg_shift vm=%vm_dp vd=%vd_dp size=1 shift=%neon_rshift_i4
diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc
index 255c1cf8a2a..213c1c2174a 100644
--- a/target/arm/translate-neon.c.inc
+++ b/target/arm/translate-neon.c.inc
@@ -1626,7 +1626,7 @@ static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a,
return false;
}
- if (a->size != 0) {
+ if (a->size == MO_16) {
if (!dc_isar_feature(aa32_fp16_arith, s)) {
return false;
}
@@ -1646,7 +1646,7 @@ static bool do_fp_2sh(DisasContext *s, arg_2reg_shift *a,
return true;
}
- fpst = fpstatus_ptr(a->size ? FPST_STD_F16 : FPST_STD);
+ fpst = fpstatus_ptr(a->size == MO_16 ? FPST_STD_F16 : FPST_STD);
tcg_gen_gvec_2_ptr(rd_ofs, rm_ofs, fpst, vec_size, vec_size, a->shift, fn);
tcg_temp_free_ptr(fpst);
return true;
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 09/36] target/arm: Convert VCMLA, VCADD size field to MO_* in decode
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (7 preceding siblings ...)
2020-09-14 14:06 ` [PULL 08/36] target/arm: Convert Neon VCVT fp " Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 10/36] target/arm: Remove KVM support for 32-bit Arm hosts Peter Maydell
` (26 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
The VCMLA and VCADD insns have a size field which is 0 for fp16
and 1 for fp32 (note that this is the reverse of the Neon 3-same
encoding!). Convert it to MO_* values in decode for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
---
target/arm/neon-shared.decode | 18 ++++++++++++------
target/arm/translate-neon.c.inc | 22 ++++++++++++----------
2 files changed, 24 insertions(+), 16 deletions(-)
diff --git a/target/arm/neon-shared.decode b/target/arm/neon-shared.decode
index f297ba8cdfc..a9d010880d4 100644
--- a/target/arm/neon-shared.decode
+++ b/target/arm/neon-shared.decode
@@ -34,11 +34,17 @@
%vd_dp 22:1 12:4
%vd_sp 12:4 22:1
-VCMLA 1111 110 rot:2 . 1 size:1 .... .... 1000 . q:1 . 0 .... \
- vm=%vm_dp vn=%vn_dp vd=%vd_dp
+# For VCMLA/VCADD insns, convert the single-bit size field
+# which is 0 for fp16 and 1 for fp32 into a MO_* constant.
+# (Note that this is the reverse of the sense of the 1-bit size
+# field in the 3same_fp Neon insns.)
+%vcadd_size 20:1 !function=plus1
-VCADD 1111 110 rot:1 1 . 0 size:1 .... .... 1000 . q:1 . 0 .... \
- vm=%vm_dp vn=%vn_dp vd=%vd_dp
+VCMLA 1111 110 rot:2 . 1 . .... .... 1000 . q:1 . 0 .... \
+ vm=%vm_dp vn=%vn_dp vd=%vd_dp size=%vcadd_size
+
+VCADD 1111 110 rot:1 1 . 0 . .... .... 1000 . q:1 . 0 .... \
+ vm=%vm_dp vn=%vn_dp vd=%vd_dp size=%vcadd_size
# VUDOT and VSDOT
VDOT 1111 110 00 . 10 .... .... 1101 . q:1 . u:1 .... \
@@ -51,9 +57,9 @@ VFML 1111 110 0 s:1 . 10 .... .... 1000 . 1 . 1 .... \
vm=%vm_dp vn=%vn_dp vd=%vd_dp q=1
VCMLA_scalar 1111 1110 0 . rot:2 .... .... 1000 . q:1 index:1 0 vm:4 \
- vn=%vn_dp vd=%vd_dp size=0
+ vn=%vn_dp vd=%vd_dp size=1
VCMLA_scalar 1111 1110 1 . rot:2 .... .... 1000 . q:1 . 0 .... \
- vm=%vm_dp vn=%vn_dp vd=%vd_dp size=1 index=0
+ vm=%vm_dp vn=%vn_dp vd=%vd_dp size=2 index=0
VDOT_scalar 1111 1110 0 . 10 .... .... 1101 . q:1 index:1 u:1 rm:4 \
vm=%vm_dp vn=%vn_dp vd=%vd_dp
diff --git a/target/arm/translate-neon.c.inc b/target/arm/translate-neon.c.inc
index 213c1c2174a..4d1a292981b 100644
--- a/target/arm/translate-neon.c.inc
+++ b/target/arm/translate-neon.c.inc
@@ -168,7 +168,7 @@ static bool trans_VCMLA(DisasContext *s, arg_VCMLA *a)
gen_helper_gvec_3_ptr *fn_gvec_ptr;
if (!dc_isar_feature(aa32_vcma, s)
- || (!a->size && !dc_isar_feature(aa32_fp16_arith, s))) {
+ || (a->size == MO_16 && !dc_isar_feature(aa32_fp16_arith, s))) {
return false;
}
@@ -187,8 +187,9 @@ static bool trans_VCMLA(DisasContext *s, arg_VCMLA *a)
}
opr_sz = (1 + a->q) * 8;
- fpst = fpstatus_ptr(a->size == 0 ? FPST_STD_F16 : FPST_STD);
- fn_gvec_ptr = a->size ? gen_helper_gvec_fcmlas : gen_helper_gvec_fcmlah;
+ fpst = fpstatus_ptr(a->size == MO_16 ? FPST_STD_F16 : FPST_STD);
+ fn_gvec_ptr = (a->size == MO_16) ?
+ gen_helper_gvec_fcmlah : gen_helper_gvec_fcmlas;
tcg_gen_gvec_3_ptr(vfp_reg_offset(1, a->vd),
vfp_reg_offset(1, a->vn),
vfp_reg_offset(1, a->vm),
@@ -205,7 +206,7 @@ static bool trans_VCADD(DisasContext *s, arg_VCADD *a)
gen_helper_gvec_3_ptr *fn_gvec_ptr;
if (!dc_isar_feature(aa32_vcma, s)
- || (!a->size && !dc_isar_feature(aa32_fp16_arith, s))) {
+ || (a->size == MO_16 && !dc_isar_feature(aa32_fp16_arith, s))) {
return false;
}
@@ -224,8 +225,9 @@ static bool trans_VCADD(DisasContext *s, arg_VCADD *a)
}
opr_sz = (1 + a->q) * 8;
- fpst = fpstatus_ptr(a->size == 0 ? FPST_STD_F16 : FPST_STD);
- fn_gvec_ptr = a->size ? gen_helper_gvec_fcadds : gen_helper_gvec_fcaddh;
+ fpst = fpstatus_ptr(a->size == MO_16 ? FPST_STD_F16 : FPST_STD);
+ fn_gvec_ptr = (a->size == MO_16) ?
+ gen_helper_gvec_fcaddh : gen_helper_gvec_fcadds;
tcg_gen_gvec_3_ptr(vfp_reg_offset(1, a->vd),
vfp_reg_offset(1, a->vn),
vfp_reg_offset(1, a->vm),
@@ -307,7 +309,7 @@ static bool trans_VCMLA_scalar(DisasContext *s, arg_VCMLA_scalar *a)
if (!dc_isar_feature(aa32_vcma, s)) {
return false;
}
- if (a->size == 0 && !dc_isar_feature(aa32_fp16_arith, s)) {
+ if (a->size == MO_16 && !dc_isar_feature(aa32_fp16_arith, s)) {
return false;
}
@@ -325,10 +327,10 @@ static bool trans_VCMLA_scalar(DisasContext *s, arg_VCMLA_scalar *a)
return true;
}
- fn_gvec_ptr = (a->size ? gen_helper_gvec_fcmlas_idx
- : gen_helper_gvec_fcmlah_idx);
+ fn_gvec_ptr = (a->size == MO_16) ?
+ gen_helper_gvec_fcmlah_idx : gen_helper_gvec_fcmlas_idx;
opr_sz = (1 + a->q) * 8;
- fpst = fpstatus_ptr(a->size == 0 ? FPST_STD_F16 : FPST_STD);
+ fpst = fpstatus_ptr(a->size == MO_16 ? FPST_STD_F16 : FPST_STD);
tcg_gen_gvec_3_ptr(vfp_reg_offset(1, a->vd),
vfp_reg_offset(1, a->vn),
vfp_reg_offset(1, a->vm),
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 10/36] target/arm: Remove KVM support for 32-bit Arm hosts
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (8 preceding siblings ...)
2020-09-14 14:06 ` [PULL 09/36] target/arm: Convert VCMLA, VCADD " Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 11/36] target/arm: Remove no-longer-reachable 32-bit KVM code Peter Maydell
` (25 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
We deprecated the support for KVM on 32-bit Arm hosts in time
for release 5.0, which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note: the Linux
kernel dropped support for 32-bit Arm KVM hosts in 5.7.
Running 32-bit guests on a 64-bit Arm host remains supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
---
docs/system/deprecated.rst | 16 +-
configure | 2 +-
target/arm/kvm32.c | 595 -------------------------------------
target/arm/meson.build | 5 +-
4 files changed, 10 insertions(+), 608 deletions(-)
delete mode 100644 target/arm/kvm32.c
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index a158e765c33..b633fb3ef05 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -329,14 +329,6 @@ The ``compat`` property used to set backwards compatibility modes for
the processor has been deprecated. The ``max-cpu-compat`` property of
the ``pseries`` machine type should be used instead.
-KVM guest support on 32-bit Arm hosts (since 5.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''
-
-The Linux kernel has dropped support for allowing 32-bit Arm systems
-to host KVM guests as of the 5.7 kernel. Accordingly, QEMU is deprecating
-its support for this configuration and will remove it in a future version.
-Running 32-bit guests on a 64-bit Arm host remains supported.
-
System emulator devices
-----------------------
@@ -543,6 +535,14 @@ should be used instead of the 1.09.1 version.
System emulator CPUS
--------------------
+KVM guest support on 32-bit Arm hosts (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The Linux kernel has dropped support for allowing 32-bit Arm systems
+to host KVM guests as of the 5.7 kernel. Accordingly, QEMU is deprecating
+its support for this configuration and will remove it in a future version.
+Running 32-bit guests on a 64-bit Arm host remains supported.
+
RISC-V ISA Specific CPUs (removed in 5.1)
'''''''''''''''''''''''''''''''''''''''''
diff --git a/configure b/configure
index 2b6a1196da5..ce27eafb0a9 100755
--- a/configure
+++ b/configure
@@ -234,7 +234,7 @@ supported_kvm_target() {
test "$kvm" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
case "${1%-softmmu}:$cpu" in
- arm:arm | aarch64:aarch64 | \
+ aarch64:aarch64 | \
i386:i386 | i386:x86_64 | i386:x32 | \
x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
mips:mips | mipsel:mips | mips64:mips | mips64el:mips | \
diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c
deleted file mode 100644
index 1f2b8f8b7a5..00000000000
--- a/target/arm/kvm32.c
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * ARM implementation of KVM hooks, 32 bit specific code.
- *
- * Copyright Christoffer Dall 2009-2010
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/osdep.h"
-#include <sys/ioctl.h>
-
-#include <linux/kvm.h>
-
-#include "qemu-common.h"
-#include "cpu.h"
-#include "qemu/timer.h"
-#include "sysemu/runstate.h"
-#include "sysemu/kvm.h"
-#include "kvm_arm.h"
-#include "internals.h"
-#include "qemu/log.h"
-
-static int read_sys_reg32(int fd, uint32_t *pret, uint64_t id)
-{
- struct kvm_one_reg idreg = { .id = id, .addr = (uintptr_t)pret };
-
- assert((id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U32);
- return ioctl(fd, KVM_GET_ONE_REG, &idreg);
-}
-
-bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
-{
- /* Identify the feature bits corresponding to the host CPU, and
- * fill out the ARMHostCPUClass fields accordingly. To do this
- * we have to create a scratch VM, create a single CPU inside it,
- * and then query that CPU for the relevant ID registers.
- */
- int err = 0, fdarray[3];
- uint32_t midr, id_pfr0;
- uint64_t features = 0;
-
- /* Old kernels may not know about the PREFERRED_TARGET ioctl: however
- * we know these will only support creating one kind of guest CPU,
- * which is its preferred CPU type.
- */
- static const uint32_t cpus_to_try[] = {
- QEMU_KVM_ARM_TARGET_CORTEX_A15,
- QEMU_KVM_ARM_TARGET_NONE
- };
- /*
- * target = -1 informs kvm_arm_create_scratch_host_vcpu()
- * to use the preferred target
- */
- struct kvm_vcpu_init init = { .target = -1, };
-
- if (!kvm_arm_create_scratch_host_vcpu(cpus_to_try, fdarray, &init)) {
- return false;
- }
-
- ahcf->target = init.target;
-
- /* This is not strictly blessed by the device tree binding docs yet,
- * but in practice the kernel does not care about this string so
- * there is no point maintaining an KVM_ARM_TARGET_* -> string table.
- */
- ahcf->dtb_compatible = "arm,arm-v7";
-
- err |= read_sys_reg32(fdarray[2], &midr, ARM_CP15_REG32(0, 0, 0, 0));
- err |= read_sys_reg32(fdarray[2], &id_pfr0, ARM_CP15_REG32(0, 0, 1, 0));
-
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar0,
- ARM_CP15_REG32(0, 0, 2, 0));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar1,
- ARM_CP15_REG32(0, 0, 2, 1));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar2,
- ARM_CP15_REG32(0, 0, 2, 2));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar3,
- ARM_CP15_REG32(0, 0, 2, 3));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar4,
- ARM_CP15_REG32(0, 0, 2, 4));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_isar5,
- ARM_CP15_REG32(0, 0, 2, 5));
- if (read_sys_reg32(fdarray[2], &ahcf->isar.id_isar6,
- ARM_CP15_REG32(0, 0, 2, 7))) {
- /*
- * Older kernels don't support reading ID_ISAR6. This register was
- * only introduced in ARMv8, so we can assume that it is zero on a
- * CPU that a kernel this old is running on.
- */
- ahcf->isar.id_isar6 = 0;
- }
-
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0,
- ARM_CP15_REG32(0, 0, 1, 2));
-
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.mvfr0,
- KVM_REG_ARM | KVM_REG_SIZE_U32 |
- KVM_REG_ARM_VFP | KVM_REG_ARM_VFP_MVFR0);
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.mvfr1,
- KVM_REG_ARM | KVM_REG_SIZE_U32 |
- KVM_REG_ARM_VFP | KVM_REG_ARM_VFP_MVFR1);
- /*
- * FIXME: There is not yet a way to read MVFR2.
- * Fortunately there is not yet anything in there that affects migration.
- */
-
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0,
- ARM_CP15_REG32(0, 0, 1, 4));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr1,
- ARM_CP15_REG32(0, 0, 1, 5));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr2,
- ARM_CP15_REG32(0, 0, 1, 6));
- err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr3,
- ARM_CP15_REG32(0, 0, 1, 7));
- if (read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr4,
- ARM_CP15_REG32(0, 0, 2, 6))) {
- /*
- * Older kernels don't support reading ID_MMFR4 (a new in v8
- * register); assume it's zero.
- */
- ahcf->isar.id_mmfr4 = 0;
- }
-
- /*
- * There is no way to read DBGDIDR, because currently 32-bit KVM
- * doesn't implement debug at all. Leave it at zero.
- */
-
- kvm_arm_destroy_scratch_host_vcpu(fdarray);
-
- if (err < 0) {
- return false;
- }
-
- /* Now we've retrieved all the register information we can
- * set the feature bits based on the ID register fields.
- * We can assume any KVM supporting CPU is at least a v7
- * with VFPv3, virtualization extensions, and the generic
- * timers; this in turn implies most of the other feature
- * bits, but a few must be tested.
- */
- features |= 1ULL << ARM_FEATURE_V7VE;
- features |= 1ULL << ARM_FEATURE_GENERIC_TIMER;
-
- if (extract32(id_pfr0, 12, 4) == 1) {
- features |= 1ULL << ARM_FEATURE_THUMB2EE;
- }
- if (extract32(ahcf->isar.mvfr1, 12, 4) == 1) {
- features |= 1ULL << ARM_FEATURE_NEON;
- }
-
- ahcf->features = features;
-
- return true;
-}
-
-bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx)
-{
- /* Return true if the regidx is a register we should synchronize
- * via the cpreg_tuples array (ie is not a core reg we sync by
- * hand in kvm_arch_get/put_registers())
- */
- switch (regidx & KVM_REG_ARM_COPROC_MASK) {
- case KVM_REG_ARM_CORE:
- case KVM_REG_ARM_VFP:
- return false;
- default:
- return true;
- }
-}
-
-typedef struct CPRegStateLevel {
- uint64_t regidx;
- int level;
-} CPRegStateLevel;
-
-/* All coprocessor registers not listed in the following table are assumed to
- * be of the level KVM_PUT_RUNTIME_STATE. If a register should be written less
- * often, you must add it to this table with a state of either
- * KVM_PUT_RESET_STATE or KVM_PUT_FULL_STATE.
- */
-static const CPRegStateLevel non_runtime_cpregs[] = {
- { KVM_REG_ARM_TIMER_CNT, KVM_PUT_FULL_STATE },
-};
-
-int kvm_arm_cpreg_level(uint64_t regidx)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(non_runtime_cpregs); i++) {
- const CPRegStateLevel *l = &non_runtime_cpregs[i];
- if (l->regidx == regidx) {
- return l->level;
- }
- }
-
- return KVM_PUT_RUNTIME_STATE;
-}
-
-#define ARM_CPU_ID_MPIDR 0, 0, 0, 5
-
-int kvm_arch_init_vcpu(CPUState *cs)
-{
- int ret;
- uint64_t v;
- uint32_t mpidr;
- struct kvm_one_reg r;
- ARMCPU *cpu = ARM_CPU(cs);
-
- if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE) {
- fprintf(stderr, "KVM is not supported for this guest CPU type\n");
- return -EINVAL;
- }
-
- qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs);
-
- /* Determine init features for this CPU */
- memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features));
- if (cs->start_powered_off) {
- cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
- }
- if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
- cpu->psci_version = 2;
- cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_PSCI_0_2;
- }
-
- /* Do KVM_ARM_VCPU_INIT ioctl */
- ret = kvm_arm_vcpu_init(cs);
- if (ret) {
- return ret;
- }
-
- /* Query the kernel to make sure it supports 32 VFP
- * registers: QEMU's "cortex-a15" CPU is always a
- * VFP-D32 core. The simplest way to do this is just
- * to attempt to read register d31.
- */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP | 31;
- r.addr = (uintptr_t)(&v);
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret == -ENOENT) {
- return -EINVAL;
- }
-
- /*
- * When KVM is in use, PSCI is emulated in-kernel and not by qemu.
- * Currently KVM has its own idea about MPIDR assignment, so we
- * override our defaults with what we get from KVM.
- */
- ret = kvm_get_one_reg(cs, ARM_CP15_REG32(ARM_CPU_ID_MPIDR), &mpidr);
- if (ret) {
- return ret;
- }
- cpu->mp_affinity = mpidr & ARM32_AFFINITY_MASK;
-
- /* Check whether userspace can specify guest syndrome value */
- kvm_arm_init_serror_injection(cs);
-
- return kvm_arm_init_cpreg_list(cpu);
-}
-
-int kvm_arch_destroy_vcpu(CPUState *cs)
-{
- return 0;
-}
-
-typedef struct Reg {
- uint64_t id;
- int offset;
-} Reg;
-
-#define COREREG(KERNELNAME, QEMUFIELD) \
- { \
- KVM_REG_ARM | KVM_REG_SIZE_U32 | \
- KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(KERNELNAME), \
- offsetof(CPUARMState, QEMUFIELD) \
- }
-
-#define VFPSYSREG(R) \
- { \
- KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP | \
- KVM_REG_ARM_VFP_##R, \
- offsetof(CPUARMState, vfp.xregs[ARM_VFP_##R]) \
- }
-
-/* Like COREREG, but handle fields which are in a uint64_t in CPUARMState. */
-#define COREREG64(KERNELNAME, QEMUFIELD) \
- { \
- KVM_REG_ARM | KVM_REG_SIZE_U32 | \
- KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(KERNELNAME), \
- offsetoflow32(CPUARMState, QEMUFIELD) \
- }
-
-static const Reg regs[] = {
- /* R0_usr .. R14_usr */
- COREREG(usr_regs.uregs[0], regs[0]),
- COREREG(usr_regs.uregs[1], regs[1]),
- COREREG(usr_regs.uregs[2], regs[2]),
- COREREG(usr_regs.uregs[3], regs[3]),
- COREREG(usr_regs.uregs[4], regs[4]),
- COREREG(usr_regs.uregs[5], regs[5]),
- COREREG(usr_regs.uregs[6], regs[6]),
- COREREG(usr_regs.uregs[7], regs[7]),
- COREREG(usr_regs.uregs[8], usr_regs[0]),
- COREREG(usr_regs.uregs[9], usr_regs[1]),
- COREREG(usr_regs.uregs[10], usr_regs[2]),
- COREREG(usr_regs.uregs[11], usr_regs[3]),
- COREREG(usr_regs.uregs[12], usr_regs[4]),
- COREREG(usr_regs.uregs[13], banked_r13[BANK_USRSYS]),
- COREREG(usr_regs.uregs[14], banked_r14[BANK_USRSYS]),
- /* R13, R14, SPSR for SVC, ABT, UND, IRQ banks */
- COREREG(svc_regs[0], banked_r13[BANK_SVC]),
- COREREG(svc_regs[1], banked_r14[BANK_SVC]),
- COREREG64(svc_regs[2], banked_spsr[BANK_SVC]),
- COREREG(abt_regs[0], banked_r13[BANK_ABT]),
- COREREG(abt_regs[1], banked_r14[BANK_ABT]),
- COREREG64(abt_regs[2], banked_spsr[BANK_ABT]),
- COREREG(und_regs[0], banked_r13[BANK_UND]),
- COREREG(und_regs[1], banked_r14[BANK_UND]),
- COREREG64(und_regs[2], banked_spsr[BANK_UND]),
- COREREG(irq_regs[0], banked_r13[BANK_IRQ]),
- COREREG(irq_regs[1], banked_r14[BANK_IRQ]),
- COREREG64(irq_regs[2], banked_spsr[BANK_IRQ]),
- /* R8_fiq .. R14_fiq and SPSR_fiq */
- COREREG(fiq_regs[0], fiq_regs[0]),
- COREREG(fiq_regs[1], fiq_regs[1]),
- COREREG(fiq_regs[2], fiq_regs[2]),
- COREREG(fiq_regs[3], fiq_regs[3]),
- COREREG(fiq_regs[4], fiq_regs[4]),
- COREREG(fiq_regs[5], banked_r13[BANK_FIQ]),
- COREREG(fiq_regs[6], banked_r14[BANK_FIQ]),
- COREREG64(fiq_regs[7], banked_spsr[BANK_FIQ]),
- /* R15 */
- COREREG(usr_regs.uregs[15], regs[15]),
- /* VFP system registers */
- VFPSYSREG(FPSID),
- VFPSYSREG(MVFR1),
- VFPSYSREG(MVFR0),
- VFPSYSREG(FPEXC),
- VFPSYSREG(FPINST),
- VFPSYSREG(FPINST2),
-};
-
-int kvm_arch_put_registers(CPUState *cs, int level)
-{
- ARMCPU *cpu = ARM_CPU(cs);
- CPUARMState *env = &cpu->env;
- struct kvm_one_reg r;
- int mode, bn;
- int ret, i;
- uint32_t cpsr, fpscr;
-
- /* Make sure the banked regs are properly set */
- mode = env->uncached_cpsr & CPSR_M;
- bn = bank_number(mode);
- if (mode == ARM_CPU_MODE_FIQ) {
- memcpy(env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t));
- } else {
- memcpy(env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t));
- }
- env->banked_r13[bn] = env->regs[13];
- env->banked_spsr[bn] = env->spsr;
- env->banked_r14[r14_bank_number(mode)] = env->regs[14];
-
- /* Now we can safely copy stuff down to the kernel */
- for (i = 0; i < ARRAY_SIZE(regs); i++) {
- r.id = regs[i].id;
- r.addr = (uintptr_t)(env) + regs[i].offset;
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- }
-
- /* Special cases which aren't a single CPUARMState field */
- cpsr = cpsr_read(env);
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 |
- KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(usr_regs.ARM_cpsr);
- r.addr = (uintptr_t)(&cpsr);
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
-
- /* VFP registers */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
- for (i = 0; i < 32; i++) {
- r.addr = (uintptr_t)aa32_vfp_dreg(env, i);
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- r.id++;
- }
-
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP |
- KVM_REG_ARM_VFP_FPSCR;
- fpscr = vfp_get_fpscr(env);
- r.addr = (uintptr_t)&fpscr;
- ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
-
- write_cpustate_to_list(cpu, true);
-
- if (!write_list_to_kvmstate(cpu, level)) {
- return EINVAL;
- }
-
- /*
- * Setting VCPU events should be triggered after syncing the registers
- * to avoid overwriting potential changes made by KVM upon calling
- * KVM_SET_VCPU_EVENTS ioctl
- */
- ret = kvm_put_vcpu_events(cpu);
- if (ret) {
- return ret;
- }
-
- kvm_arm_sync_mpstate_to_kvm(cpu);
-
- return ret;
-}
-
-int kvm_arch_get_registers(CPUState *cs)
-{
- ARMCPU *cpu = ARM_CPU(cs);
- CPUARMState *env = &cpu->env;
- struct kvm_one_reg r;
- int mode, bn;
- int ret, i;
- uint32_t cpsr, fpscr;
-
- for (i = 0; i < ARRAY_SIZE(regs); i++) {
- r.id = regs[i].id;
- r.addr = (uintptr_t)(env) + regs[i].offset;
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- }
-
- /* Special cases which aren't a single CPUARMState field */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 |
- KVM_REG_ARM_CORE | KVM_REG_ARM_CORE_REG(usr_regs.ARM_cpsr);
- r.addr = (uintptr_t)(&cpsr);
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- cpsr_write(env, cpsr, 0xffffffff, CPSRWriteRaw);
-
- /* Make sure the current mode regs are properly set */
- mode = env->uncached_cpsr & CPSR_M;
- bn = bank_number(mode);
- if (mode == ARM_CPU_MODE_FIQ) {
- memcpy(env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t));
- } else {
- memcpy(env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t));
- }
- env->regs[13] = env->banked_r13[bn];
- env->spsr = env->banked_spsr[bn];
- env->regs[14] = env->banked_r14[r14_bank_number(mode)];
-
- /* VFP registers */
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U64 | KVM_REG_ARM_VFP;
- for (i = 0; i < 32; i++) {
- r.addr = (uintptr_t)aa32_vfp_dreg(env, i);
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- r.id++;
- }
-
- r.id = KVM_REG_ARM | KVM_REG_SIZE_U32 | KVM_REG_ARM_VFP |
- KVM_REG_ARM_VFP_FPSCR;
- r.addr = (uintptr_t)&fpscr;
- ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &r);
- if (ret) {
- return ret;
- }
- vfp_set_fpscr(env, fpscr);
-
- ret = kvm_get_vcpu_events(cpu);
- if (ret) {
- return ret;
- }
-
- if (!write_kvmstate_to_list(cpu)) {
- return EINVAL;
- }
- /* Note that it's OK to have registers which aren't in CPUState,
- * so we can ignore a failure return here.
- */
- write_list_to_cpustate(cpu);
-
- kvm_arm_sync_mpstate_to_qemu(cpu);
-
- return 0;
-}
-
-int kvm_arch_insert_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
-{
- qemu_log_mask(LOG_UNIMP, "%s: guest debug not yet implemented\n", __func__);
- return -EINVAL;
-}
-
-int kvm_arch_remove_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
-{
- qemu_log_mask(LOG_UNIMP, "%s: guest debug not yet implemented\n", __func__);
- return -EINVAL;
-}
-
-bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit)
-{
- qemu_log_mask(LOG_UNIMP, "%s: guest debug not yet implemented\n", __func__);
- return false;
-}
-
-int kvm_arch_insert_hw_breakpoint(target_ulong addr,
- target_ulong len, int type)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
- return -EINVAL;
-}
-
-int kvm_arch_remove_hw_breakpoint(target_ulong addr,
- target_ulong len, int type)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
- return -EINVAL;
-}
-
-void kvm_arch_remove_all_hw_breakpoints(void)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
-}
-
-void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
-}
-
-bool kvm_arm_hw_debug_active(CPUState *cs)
-{
- return false;
-}
-
-void kvm_arm_pmu_set_irq(CPUState *cs, int irq)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
-}
-
-void kvm_arm_pmu_init(CPUState *cs)
-{
- qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__);
-}
-
-#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0)
-#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2)
-/*
- *DFSR:
- * TTBCR.EAE == 0
- * FS[4] - DFSR[10]
- * FS[3:0] - DFSR[3:0]
- * TTBCR.EAE == 1
- * FS, bits [5:0]
- */
-#define DFSR_FSC(lpae, v) \
- ((lpae) ? ((v) & 0x3F) : (((v) >> 6) | ((v) & 0x1F)))
-
-#define DFSC_EXTABT(lpae) ((lpae) ? 0x10 : 0x08)
-
-bool kvm_arm_verify_ext_dabt_pending(CPUState *cs)
-{
- uint32_t dfsr_val;
-
- if (!kvm_get_one_reg(cs, ARM_REG_DFSR, &dfsr_val)) {
- ARMCPU *cpu = ARM_CPU(cs);
- CPUARMState *env = &cpu->env;
- uint32_t ttbcr;
- int lpae = 0;
-
- if (!kvm_get_one_reg(cs, ARM_REG_TTBCR, &ttbcr)) {
- lpae = arm_feature(env, ARM_FEATURE_LPAE) && (ttbcr & TTBCR_EAE);
- }
- /* The verification is based on FS filed of the DFSR reg only*/
- return (DFSR_FSC(lpae, dfsr_val) == DFSC_EXTABT(lpae));
- }
- return false;
-}
diff --git a/target/arm/meson.build b/target/arm/meson.build
index 89900907125..f5de2a77b89 100644
--- a/target/arm/meson.build
+++ b/target/arm/meson.build
@@ -34,10 +34,7 @@ arm_ss.add(zlib)
arm_ss.add(when: 'CONFIG_TCG', if_true: files('arm-semi.c'))
-kvm_ss = ss.source_set()
-kvm_ss.add(when: 'TARGET_AARCH64', if_true: files('kvm64.c'), if_false: files('kvm32.c'))
-arm_ss.add_all(when: 'CONFIG_KVM', if_true: kvm_ss)
-arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false: files('kvm-stub.c'))
+arm_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c', 'kvm64.c'), if_false: files('kvm-stub.c'))
arm_ss.add(when: 'TARGET_AARCH64', if_true: files(
'cpu64.c',
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 11/36] target/arm: Remove no-longer-reachable 32-bit KVM code
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (9 preceding siblings ...)
2020-09-14 14:06 ` [PULL 10/36] target/arm: Remove KVM support for 32-bit Arm hosts Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 12/36] hw/arm/mps2: New board model mps2-an386 Peter Maydell
` (24 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Now that 32-bit KVM host support is gone, KVM can never
be enabled unless CONFIG_AARCH64 is true, and some code
paths are no longer reachable and can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-3-peter.maydell@linaro.org
---
target/arm/kvm-consts.h | 7 ---
target/arm/kvm_arm.h | 6 ---
target/arm/cpu.c | 101 +++++++++++++++++++---------------------
target/arm/kvm.c | 7 ---
4 files changed, 47 insertions(+), 74 deletions(-)
diff --git a/target/arm/kvm-consts.h b/target/arm/kvm-consts.h
index aad28258a36..580f1c1fee0 100644
--- a/target/arm/kvm-consts.h
+++ b/target/arm/kvm-consts.h
@@ -136,16 +136,11 @@ MISMATCH_CHECK(QEMU_PSCI_RET_DISABLED, PSCI_RET_DISABLED);
*/
#define QEMU_KVM_ARM_TARGET_NONE UINT_MAX
-#ifdef TARGET_AARCH64
MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_AEM_V8, KVM_ARM_TARGET_AEM_V8);
MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_FOUNDATION_V8, KVM_ARM_TARGET_FOUNDATION_V8);
MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_CORTEX_A57, KVM_ARM_TARGET_CORTEX_A57);
MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_XGENE_POTENZA, KVM_ARM_TARGET_XGENE_POTENZA);
MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_CORTEX_A53, KVM_ARM_TARGET_CORTEX_A53);
-#else
-MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_CORTEX_A15, KVM_ARM_TARGET_CORTEX_A15);
-MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_CORTEX_A7, KVM_ARM_TARGET_CORTEX_A7);
-#endif
#define CP_REG_ARM64 0x6000000000000000ULL
#define CP_REG_ARM_COPROC_MASK 0x000000000FFF0000
@@ -165,7 +160,6 @@ MISMATCH_CHECK(QEMU_KVM_ARM_TARGET_CORTEX_A7, KVM_ARM_TARGET_CORTEX_A7);
/* No kernel define but it's useful to QEMU */
#define CP_REG_ARM64_SYSREG_CP (CP_REG_ARM64_SYSREG >> CP_REG_ARM_COPROC_SHIFT)
-#ifdef TARGET_AARCH64
MISMATCH_CHECK(CP_REG_ARM64, KVM_REG_ARM64);
MISMATCH_CHECK(CP_REG_ARM_COPROC_MASK, KVM_REG_ARM_COPROC_MASK);
MISMATCH_CHECK(CP_REG_ARM_COPROC_SHIFT, KVM_REG_ARM_COPROC_SHIFT);
@@ -180,7 +174,6 @@ MISMATCH_CHECK(CP_REG_ARM64_SYSREG_CRM_MASK, KVM_REG_ARM64_SYSREG_CRM_MASK);
MISMATCH_CHECK(CP_REG_ARM64_SYSREG_CRM_SHIFT, KVM_REG_ARM64_SYSREG_CRM_SHIFT);
MISMATCH_CHECK(CP_REG_ARM64_SYSREG_OP2_MASK, KVM_REG_ARM64_SYSREG_OP2_MASK);
MISMATCH_CHECK(CP_REG_ARM64_SYSREG_OP2_SHIFT, KVM_REG_ARM64_SYSREG_OP2_SHIFT);
-#endif
#undef MISMATCH_CHECK
diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h
index adb38514bf2..bc178eeb84c 100644
--- a/target/arm/kvm_arm.h
+++ b/target/arm/kvm_arm.h
@@ -406,13 +406,7 @@ static inline const char *gic_class_name(void)
static inline const char *gicv3_class_name(void)
{
if (kvm_irqchip_in_kernel()) {
-#ifdef TARGET_AARCH64
return "kvm-arm-gicv3";
-#else
- error_report("KVM GICv3 acceleration is not supported on this "
- "platform");
- exit(1);
-#endif
} else {
if (kvm_enabled()) {
error_report("Userspace GICv3 is not supported with KVM");
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 6b4e708c08f..7b5ea65fab9 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -2098,72 +2098,69 @@ static void cortex_a15_initfn(Object *obj)
}
#ifndef TARGET_AARCH64
-/* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
- * otherwise, a CPU with as many features enabled as our emulation supports.
+/*
+ * -cpu max: a CPU with as many features enabled as our emulation supports.
* The version of '-cpu max' for qemu-system-aarch64 is defined in cpu64.c;
- * this only needs to handle 32 bits.
+ * this only needs to handle 32 bits, and need not care about KVM.
*/
static void arm_max_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
- if (kvm_enabled()) {
- kvm_arm_set_cpu_features_from_host(cpu);
- } else {
- cortex_a15_initfn(obj);
+ cortex_a15_initfn(obj);
- /* old-style VFP short-vector support */
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
+ /* old-style VFP short-vector support */
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
#ifdef CONFIG_USER_ONLY
- /* We don't set these in system emulation mode for the moment,
- * since we don't correctly set (all of) the ID registers to
- * advertise them.
- */
- set_feature(&cpu->env, ARM_FEATURE_V8);
- {
- uint32_t t;
+ /*
+ * We don't set these in system emulation mode for the moment,
+ * since we don't correctly set (all of) the ID registers to
+ * advertise them.
+ */
+ set_feature(&cpu->env, ARM_FEATURE_V8);
+ {
+ uint32_t t;
- t = cpu->isar.id_isar5;
- t = FIELD_DP32(t, ID_ISAR5, AES, 2);
- t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
- t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
- t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
- t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
- t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
- cpu->isar.id_isar5 = t;
+ t = cpu->isar.id_isar5;
+ t = FIELD_DP32(t, ID_ISAR5, AES, 2);
+ t = FIELD_DP32(t, ID_ISAR5, SHA1, 1);
+ t = FIELD_DP32(t, ID_ISAR5, SHA2, 1);
+ t = FIELD_DP32(t, ID_ISAR5, CRC32, 1);
+ t = FIELD_DP32(t, ID_ISAR5, RDM, 1);
+ t = FIELD_DP32(t, ID_ISAR5, VCMA, 1);
+ cpu->isar.id_isar5 = t;
- t = cpu->isar.id_isar6;
- t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
- t = FIELD_DP32(t, ID_ISAR6, DP, 1);
- t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
- t = FIELD_DP32(t, ID_ISAR6, SB, 1);
- t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
- cpu->isar.id_isar6 = t;
+ t = cpu->isar.id_isar6;
+ t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1);
+ t = FIELD_DP32(t, ID_ISAR6, DP, 1);
+ t = FIELD_DP32(t, ID_ISAR6, FHM, 1);
+ t = FIELD_DP32(t, ID_ISAR6, SB, 1);
+ t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1);
+ cpu->isar.id_isar6 = t;
- t = cpu->isar.mvfr1;
- t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */
- t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */
- cpu->isar.mvfr1 = t;
+ t = cpu->isar.mvfr1;
+ t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */
+ t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */
+ cpu->isar.mvfr1 = t;
- t = cpu->isar.mvfr2;
- t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
- t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */
- cpu->isar.mvfr2 = t;
+ t = cpu->isar.mvfr2;
+ t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */
+ t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */
+ cpu->isar.mvfr2 = t;
- t = cpu->isar.id_mmfr3;
- t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
- cpu->isar.id_mmfr3 = t;
+ t = cpu->isar.id_mmfr3;
+ t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */
+ cpu->isar.id_mmfr3 = t;
- t = cpu->isar.id_mmfr4;
- t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
- t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
- t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
- t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
- cpu->isar.id_mmfr4 = t;
- }
-#endif
+ t = cpu->isar.id_mmfr4;
+ t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */
+ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */
+ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */
+ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */
+ cpu->isar.id_mmfr4 = t;
}
+#endif
}
#endif
@@ -2267,11 +2264,7 @@ static void arm_host_initfn(Object *obj)
static const TypeInfo host_arm_cpu_type_info = {
.name = TYPE_ARM_HOST_CPU,
-#ifdef TARGET_AARCH64
.parent = TYPE_AARCH64_CPU,
-#else
- .parent = TYPE_ARM_CPU,
-#endif
.instance_init = arm_host_initfn,
};
diff --git a/target/arm/kvm.c b/target/arm/kvm.c
index 8bb7318378b..2eae73315d6 100644
--- a/target/arm/kvm.c
+++ b/target/arm/kvm.c
@@ -918,22 +918,15 @@ int kvm_arch_process_async_events(CPUState *cs)
return 0;
}
-/* The #ifdef protections are until 32bit headers are imported and can
- * be removed once both 32 and 64 bit reach feature parity.
- */
void kvm_arch_update_guest_debug(CPUState *cs, struct kvm_guest_debug *dbg)
{
-#ifdef KVM_GUESTDBG_USE_SW_BP
if (kvm_sw_breakpoints_active(cs)) {
dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP;
}
-#endif
-#ifdef KVM_GUESTDBG_USE_HW
if (kvm_arm_hw_debug_active(cs)) {
dbg->control |= KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW;
kvm_arm_copy_hw_debug_data(&dbg->arch);
}
-#endif
}
void kvm_arch_init_irq_routing(KVMState *s)
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 12/36] hw/arm/mps2: New board model mps2-an386
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (10 preceding siblings ...)
2020-09-14 14:06 ` [PULL 11/36] target/arm: Remove no-longer-reachable 32-bit KVM code Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 13/36] hw/arm/mps2: New board model mps2-an500 Peter Maydell
` (23 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Implement a model of the MPS2 with the AN386 firmware. This is
essentially identical to the AN385 firmware, but it has a
Cortex-M4 rather than a Cortex-M3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
---
docs/system/arm/mps2.rst | 8 +++++---
hw/arm/mps2.c | 34 +++++++++++++++++++++++++++++-----
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
index 3a98cb59b0d..e680a4ceb71 100644
--- a/docs/system/arm/mps2.rst
+++ b/docs/system/arm/mps2.rst
@@ -1,5 +1,5 @@
-Arm MPS2 boards (``mps2-an385``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
-================================================================================
+Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
+================================================================================================
These board models all use Arm M-profile CPUs.
@@ -12,6 +12,8 @@ QEMU models the following FPGA images:
``mps2-an385``
Cortex-M3 as documented in ARM Application Note AN385
+``mps2-an386``
+ Cortex-M4 as documented in ARM Application Note AN386
``mps2-an511``
Cortex-M3 'DesignStart' as documented in AN511
``mps2-an505``
@@ -21,7 +23,7 @@ QEMU models the following FPGA images:
Differences between QEMU and real hardware:
-- AN385 remapping of low 16K of memory to either ZBT SSRAM1 or to
+- AN385/AN386 remapping of low 16K of memory to either ZBT SSRAM1 or to
block RAM is unimplemented (QEMU always maps this to ZBT SSRAM1, as
if zbt_boot_ctrl is always zero)
- QEMU provides a LAN9118 ethernet rather than LAN9220; the only guest
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index 4ee5c38459e..d3ec73fbe78 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -15,6 +15,7 @@
* as seen by the guest depend significantly on the FPGA image.
* We model the following FPGA images:
* "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385
+ * "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386
* "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511
*
* Links to the TRM for the board itself and to the various Application
@@ -48,6 +49,7 @@
typedef enum MPS2FPGAType {
FPGA_AN385,
+ FPGA_AN386,
FPGA_AN511,
} MPS2FPGAType;
@@ -82,6 +84,7 @@ typedef struct MPS2MachineState MPS2MachineState;
#define TYPE_MPS2_MACHINE "mps2"
#define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385")
+#define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386")
#define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511")
DECLARE_OBJ_CHECKERS(MPS2MachineState, MPS2MachineClass,
@@ -139,9 +142,9 @@ static void mps2_common_init(MachineState *machine)
* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
* call the 16MB our "system memory", as it's the largest lump.
*
- * Common to both boards:
- * 0x21000000..0x21ffffff : PSRAM (16MB)
- * AN385 only:
+ * AN385/AN386/AN511:
+ * 0x21000000 .. 0x21ffffff : PSRAM (16MB)
+ * AN385/AN386 only:
* 0x00000000 .. 0x003fffff : ZBT SSRAM1
* 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
* 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
@@ -156,7 +159,7 @@ static void mps2_common_init(MachineState *machine)
* 0x20000000 .. 0x2001ffff : SRAM
* 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
*
- * The AN385 has a feature where the lowest 16K can be mapped
+ * The AN385/AN386 has a feature where the lowest 16K can be mapped
* either to the bottom of the ZBT SSRAM1 or to the block RAM.
* This is of no use for QEMU so we don't implement it (as if
* zbt_boot_ctrl is always zero).
@@ -165,6 +168,7 @@ static void mps2_common_init(MachineState *machine)
switch (mmc->fpga_type) {
case FPGA_AN385:
+ case FPGA_AN386:
make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
@@ -192,6 +196,7 @@ static void mps2_common_init(MachineState *machine)
armv7m = DEVICE(&mms->armv7m);
switch (mmc->fpga_type) {
case FPGA_AN385:
+ case FPGA_AN386:
qdev_prop_set_uint32(armv7m, "num-irq", 32);
break;
case FPGA_AN511:
@@ -228,6 +233,7 @@ static void mps2_common_init(MachineState *machine)
switch (mmc->fpga_type) {
case FPGA_AN385:
+ case FPGA_AN386:
{
/* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
* Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
@@ -379,7 +385,7 @@ static void mps2_common_init(MachineState *machine)
*/
lan9118_init(&nd_table[0], 0x40200000,
qdev_get_gpio_in(armv7m,
- mmc->fpga_type == FPGA_AN385 ? 13 : 47));
+ mmc->fpga_type == FPGA_AN511 ? 47 : 13));
system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
@@ -408,6 +414,17 @@ static void mps2_an385_class_init(ObjectClass *oc, void *data)
mmc->scc_id = 0x41043850;
}
+static void mps2_an386_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
+
+ mc->desc = "ARM MPS2 with AN386 FPGA image for Cortex-M4";
+ mmc->fpga_type = FPGA_AN386;
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4");
+ mmc->scc_id = 0x41043860;
+}
+
static void mps2_an511_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -434,6 +451,12 @@ static const TypeInfo mps2_an385_info = {
.class_init = mps2_an385_class_init,
};
+static const TypeInfo mps2_an386_info = {
+ .name = TYPE_MPS2_AN386_MACHINE,
+ .parent = TYPE_MPS2_MACHINE,
+ .class_init = mps2_an386_class_init,
+};
+
static const TypeInfo mps2_an511_info = {
.name = TYPE_MPS2_AN511_MACHINE,
.parent = TYPE_MPS2_MACHINE,
@@ -444,6 +467,7 @@ static void mps2_machine_init(void)
{
type_register_static(&mps2_info);
type_register_static(&mps2_an385_info);
+ type_register_static(&mps2_an386_info);
type_register_static(&mps2_an511_info);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 13/36] hw/arm/mps2: New board model mps2-an500
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (11 preceding siblings ...)
2020-09-14 14:06 ` [PULL 12/36] hw/arm/mps2: New board model mps2-an386 Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 14/36] docs/system/arm/mps2.rst: Make board list consistent Peter Maydell
` (22 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Implement a model of the MPS2 with the AN500 firmware. This is
similar to the AN385, with the following differences:
* Cortex-M7 CPU
* PSRAM is at 0x6000_0000
* Ethernet is at 0xa000_0000
* No zbt_boot_ctrl remapping of the low 16K
(but QEMU doesn't implement this anyway)
* no "block RAM" at 0x01000000
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
---
docs/system/arm/mps2.rst | 6 ++--
hw/arm/mps2.c | 67 +++++++++++++++++++++++++++++++++-------
2 files changed, 60 insertions(+), 13 deletions(-)
diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
index e680a4ceb71..7f2e9c8d52e 100644
--- a/docs/system/arm/mps2.rst
+++ b/docs/system/arm/mps2.rst
@@ -1,5 +1,5 @@
-Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
-================================================================================================
+Arm MPS2 boards (``mps2-an385``, ``mps2-an386``, ``mps2-an500``, ``mps2-an505``, ``mps2-an511``, ``mps2-an521``)
+================================================================================================================
These board models all use Arm M-profile CPUs.
@@ -14,6 +14,8 @@ QEMU models the following FPGA images:
Cortex-M3 as documented in ARM Application Note AN385
``mps2-an386``
Cortex-M4 as documented in ARM Application Note AN386
+``mps2-an500``
+ Cortex-M7 as documented in ARM Application Note AN500
``mps2-an511``
Cortex-M3 'DesignStart' as documented in AN511
``mps2-an505``
diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c
index d3ec73fbe78..5d471608503 100644
--- a/hw/arm/mps2.c
+++ b/hw/arm/mps2.c
@@ -16,6 +16,7 @@
* We model the following FPGA images:
* "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385
* "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386
+ * "mps2-an500" -- Cortex-M7 as documented in ARM Application Note AN500
* "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511
*
* Links to the TRM for the board itself and to the various Application
@@ -50,6 +51,7 @@
typedef enum MPS2FPGAType {
FPGA_AN385,
FPGA_AN386,
+ FPGA_AN500,
FPGA_AN511,
} MPS2FPGAType;
@@ -57,6 +59,9 @@ struct MPS2MachineClass {
MachineClass parent;
MPS2FPGAType fpga_type;
uint32_t scc_id;
+ bool has_block_ram;
+ hwaddr ethernet_base;
+ hwaddr psram_base;
};
typedef struct MPS2MachineClass MPS2MachineClass;
@@ -85,6 +90,7 @@ typedef struct MPS2MachineState MPS2MachineState;
#define TYPE_MPS2_MACHINE "mps2"
#define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385")
#define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386")
+#define TYPE_MPS2_AN500_MACHINE MACHINE_TYPE_NAME("mps2-an500")
#define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511")
DECLARE_OBJ_CHECKERS(MPS2MachineState, MPS2MachineClass,
@@ -144,11 +150,12 @@ static void mps2_common_init(MachineState *machine)
*
* AN385/AN386/AN511:
* 0x21000000 .. 0x21ffffff : PSRAM (16MB)
- * AN385/AN386 only:
+ * AN385/AN386/AN500:
* 0x00000000 .. 0x003fffff : ZBT SSRAM1
* 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
* 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
* 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3
+ * AN385/AN386 only:
* 0x01000000 .. 0x01003fff : block RAM (16K)
* 0x01004000 .. 0x01007fff : mirror of above
* 0x01008000 .. 0x0100bfff : mirror of above
@@ -158,22 +165,17 @@ static void mps2_common_init(MachineState *machine)
* 0x00400000 .. 0x007fffff : ZBT SSRAM1
* 0x20000000 .. 0x2001ffff : SRAM
* 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
+ * AN500 only:
+ * 0x60000000 .. 0x60ffffff : PSRAM (16MB)
*
* The AN385/AN386 has a feature where the lowest 16K can be mapped
* either to the bottom of the ZBT SSRAM1 or to the block RAM.
* This is of no use for QEMU so we don't implement it (as if
* zbt_boot_ctrl is always zero).
*/
- memory_region_add_subregion(system_memory, 0x21000000, machine->ram);
+ memory_region_add_subregion(system_memory, mmc->psram_base, machine->ram);
- switch (mmc->fpga_type) {
- case FPGA_AN385:
- case FPGA_AN386:
- make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
- make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
- make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
- make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
- &mms->ssram23, 0x20400000);
+ if (mmc->has_block_ram) {
make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000);
make_ram_alias(&mms->blockram_m1, "mps.blockram_m1",
&mms->blockram, 0x01004000);
@@ -181,6 +183,17 @@ static void mps2_common_init(MachineState *machine)
&mms->blockram, 0x01008000);
make_ram_alias(&mms->blockram_m3, "mps.blockram_m3",
&mms->blockram, 0x0100c000);
+ }
+
+ switch (mmc->fpga_type) {
+ case FPGA_AN385:
+ case FPGA_AN386:
+ case FPGA_AN500:
+ make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
+ make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
+ make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
+ make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
+ &mms->ssram23, 0x20400000);
break;
case FPGA_AN511:
make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000);
@@ -197,6 +210,7 @@ static void mps2_common_init(MachineState *machine)
switch (mmc->fpga_type) {
case FPGA_AN385:
case FPGA_AN386:
+ case FPGA_AN500:
qdev_prop_set_uint32(armv7m, "num-irq", 32);
break;
case FPGA_AN511:
@@ -234,6 +248,7 @@ static void mps2_common_init(MachineState *machine)
switch (mmc->fpga_type) {
case FPGA_AN385:
case FPGA_AN386:
+ case FPGA_AN500:
{
/* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
* Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
@@ -383,7 +398,7 @@ static void mps2_common_init(MachineState *machine)
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
- lan9118_init(&nd_table[0], 0x40200000,
+ lan9118_init(&nd_table[0], mmc->ethernet_base,
qdev_get_gpio_in(armv7m,
mmc->fpga_type == FPGA_AN511 ? 47 : 13));
@@ -412,6 +427,9 @@ static void mps2_an385_class_init(ObjectClass *oc, void *data)
mmc->fpga_type = FPGA_AN385;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3");
mmc->scc_id = 0x41043850;
+ mmc->psram_base = 0x21000000;
+ mmc->ethernet_base = 0x40200000;
+ mmc->has_block_ram = true;
}
static void mps2_an386_class_init(ObjectClass *oc, void *data)
@@ -423,6 +441,23 @@ static void mps2_an386_class_init(ObjectClass *oc, void *data)
mmc->fpga_type = FPGA_AN386;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4");
mmc->scc_id = 0x41043860;
+ mmc->psram_base = 0x21000000;
+ mmc->ethernet_base = 0x40200000;
+ mmc->has_block_ram = true;
+}
+
+static void mps2_an500_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
+
+ mc->desc = "ARM MPS2 with AN500 FPGA image for Cortex-M7";
+ mmc->fpga_type = FPGA_AN500;
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m7");
+ mmc->scc_id = 0x41045000;
+ mmc->psram_base = 0x60000000;
+ mmc->ethernet_base = 0xa0000000;
+ mmc->has_block_ram = false;
}
static void mps2_an511_class_init(ObjectClass *oc, void *data)
@@ -434,6 +469,9 @@ static void mps2_an511_class_init(ObjectClass *oc, void *data)
mmc->fpga_type = FPGA_AN511;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3");
mmc->scc_id = 0x41045110;
+ mmc->psram_base = 0x21000000;
+ mmc->ethernet_base = 0x40200000;
+ mmc->has_block_ram = false;
}
static const TypeInfo mps2_info = {
@@ -457,6 +495,12 @@ static const TypeInfo mps2_an386_info = {
.class_init = mps2_an386_class_init,
};
+static const TypeInfo mps2_an500_info = {
+ .name = TYPE_MPS2_AN500_MACHINE,
+ .parent = TYPE_MPS2_MACHINE,
+ .class_init = mps2_an500_class_init,
+};
+
static const TypeInfo mps2_an511_info = {
.name = TYPE_MPS2_AN511_MACHINE,
.parent = TYPE_MPS2_MACHINE,
@@ -468,6 +512,7 @@ static void mps2_machine_init(void)
type_register_static(&mps2_info);
type_register_static(&mps2_an385_info);
type_register_static(&mps2_an386_info);
+ type_register_static(&mps2_an500_info);
type_register_static(&mps2_an511_info);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 14/36] docs/system/arm/mps2.rst: Make board list consistent
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (12 preceding siblings ...)
2020-09-14 14:06 ` [PULL 13/36] hw/arm/mps2: New board model mps2-an500 Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 15/36] Deprecate Unicore32 port Peter Maydell
` (21 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Make the list of MPS2 boards consistent in the phrasing of each
entry, use the correct casing of "Arm", and move the mps2-an511
entry so the list is in numeric order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-4-peter.maydell@linaro.org
---
docs/system/arm/mps2.rst | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/docs/system/arm/mps2.rst b/docs/system/arm/mps2.rst
index 7f2e9c8d52e..8c5b5f1fe07 100644
--- a/docs/system/arm/mps2.rst
+++ b/docs/system/arm/mps2.rst
@@ -11,17 +11,17 @@ as seen by the guest depend significantly on the FPGA image.
QEMU models the following FPGA images:
``mps2-an385``
- Cortex-M3 as documented in ARM Application Note AN385
+ Cortex-M3 as documented in Arm Application Note AN385
``mps2-an386``
- Cortex-M4 as documented in ARM Application Note AN386
+ Cortex-M4 as documented in Arm Application Note AN386
``mps2-an500``
- Cortex-M7 as documented in ARM Application Note AN500
-``mps2-an511``
- Cortex-M3 'DesignStart' as documented in AN511
+ Cortex-M7 as documented in Arm Application Note AN500
``mps2-an505``
- Cortex-M33 as documented in ARM Application Note AN505
+ Cortex-M33 as documented in Arm Application Note AN505
+``mps2-an511``
+ Cortex-M3 'DesignStart' as documented in Arm Application Note AN511
``mps2-an521``
- Dual Cortex-M33 as documented in Application Note AN521
+ Dual Cortex-M33 as documented in Arm Application Note AN521
Differences between QEMU and real hardware:
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 15/36] Deprecate Unicore32 port
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (13 preceding siblings ...)
2020-09-14 14:06 ` [PULL 14/36] docs/system/arm/mps2.rst: Make board list consistent Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 16/36] Deprecate lm32 port Peter Maydell
` (20 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Deprecate our Unicore32 target support:
* the Linux kernel dropped support for unicore32 in commit
05119217a9bd199c for its 5.9 release (with rationale in the
cover letter: https://lkml.org/lkml/2020/8/3/232 )
* there is apparently no upstream toolchain that can create unicore32
binaries
* the maintainer doesn't seem to have made any contributions to
QEMU since the port first landed in 2012
* nobody else seems to have made changes to the unicore code except
for generic cleanups either
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20200825172719.19422-1-peter.maydell@linaro.org
---
docs/system/deprecated.rst | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index b633fb3ef05..3f8a00e9095 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -408,6 +408,14 @@ The above, converted to the current supported format::
linux-user mode CPUs
--------------------
+``unicore32`` CPUs (since 5.2.0)
+''''''''''''''''''''''''''''''''
+
+The ``unicore32`` guest CPU support is deprecated and will be removed in
+a future version of QEMU. Support for this CPU was removed from the
+upstream Linux kernel, and there is no available upstream toolchain
+to build binaries for it.
+
``tilegx`` CPUs (since 5.1.0)
'''''''''''''''''''''''''''''
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 16/36] Deprecate lm32 port
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (14 preceding siblings ...)
2020-09-14 14:06 ` [PULL 15/36] Deprecate Unicore32 port Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 17/36] target/arm: Count PMU events when MDCR.SPME is set Peter Maydell
` (19 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
Deprecate our lm32 target support. Michael Walle (former lm32 maintainer)
suggested that we do this in 2019:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg605024.html
because the only public user of the architecture is the many-years-dead
milkymist project. (The Linux port to lm32 was never merged upstream.)
In commit 4b4d96c776f552e (March 2020) we marked it as 'orphan' in
the MAINTAINERS file, but didn't officially deprecate it. Mark it
deprecated now, with the intention of removing it from QEMU in
mid-2021 before the 6.1 release.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 20200827113259.25064-1-peter.maydell@linaro.org
---
docs/system/deprecated.rst | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst
index 3f8a00e9095..0cb8b014244 100644
--- a/docs/system/deprecated.rst
+++ b/docs/system/deprecated.rst
@@ -408,6 +408,14 @@ The above, converted to the current supported format::
linux-user mode CPUs
--------------------
+``lm32`` CPUs (since 5.2.0)
+'''''''''''''''''''''''''''
+
+The ``lm32`` guest CPU support is deprecated and will be removed in
+a future version of QEMU. The only public user of this architecture
+was the milkymist project, which has been dead for years; there was
+never an upstream Linux port.
+
``unicore32`` CPUs (since 5.2.0)
''''''''''''''''''''''''''''''''
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 17/36] target/arm: Count PMU events when MDCR.SPME is set
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (15 preceding siblings ...)
2020-09-14 14:06 ` [PULL 16/36] Deprecate lm32 port Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 18/36] hw/arm: versal-virt: Correct the tx/rx GEM clocks Peter Maydell
` (18 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Aaron Lindsay <aaron@os.amperecomputing.com>
This check was backwards when introduced in commit
033614c47de78409ad3fb39bb7bd1483b71c6789:
target/arm: Filter cycle counter based on PMCCFILTR_EL0
Cc: qemu-stable@nongnu.org
Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 44d666627a8..88bd9dd35da 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1452,7 +1452,7 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
}
} else {
prohibited = arm_feature(env, ARM_FEATURE_EL3) &&
- (env->cp15.mdcr_el3 & MDCR_SPME);
+ !(env->cp15.mdcr_el3 & MDCR_SPME);
}
if (prohibited && counter == 31) {
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 18/36] hw/arm: versal-virt: Correct the tx/rx GEM clocks
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (16 preceding siblings ...)
2020-09-14 14:06 ` [PULL 17/36] target/arm: Count PMU events when MDCR.SPME is set Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 19/36] hw/misc: Add NPCM7xx System Global Control Registers device model Peter Maydell
` (17 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Correct the GEMs tx/rx clocks to use the 125Mhz fixed-clock.
This matches the setup with the fixed-link 100Mbit PHY.
It also avoids the following warnings from the Linux kernel
driver:
eth0: unable to generate target frequency: 125000000 Hz
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200909174647.662864-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/xlnx-versal-virt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c
index 5a01e856fd9..1f9409eb32a 100644
--- a/hw/arm/xlnx-versal-virt.c
+++ b/hw/arm/xlnx-versal-virt.c
@@ -214,7 +214,7 @@ static void fdt_add_gem_nodes(VersalVirt *s)
s->phandle.ethernet_phy[i]);
qemu_fdt_setprop_cells(s->fdt, name, "clocks",
s->phandle.clk_25Mhz, s->phandle.clk_25Mhz,
- s->phandle.clk_25Mhz, s->phandle.clk_25Mhz);
+ s->phandle.clk_125Mhz, s->phandle.clk_125Mhz);
qemu_fdt_setprop(s->fdt, name, "clock-names",
clocknames, sizeof(clocknames));
qemu_fdt_setprop_cells(s->fdt, name, "interrupts",
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 19/36] hw/misc: Add NPCM7xx System Global Control Registers device model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (17 preceding siblings ...)
2020-09-14 14:06 ` [PULL 18/36] hw/arm: versal-virt: Correct the tx/rx GEM clocks Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 20/36] hw/misc: Add NPCM7xx Clock Controller " Peter Maydell
` (16 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
Implement a device model for the System Global Control Registers in the
NPCM730 and NPCM750 BMC SoCs.
This is primarily used to enable SMP boot (the boot ROM spins reading
the SCRPAD register) and DDR memory initialization; other registers are
best effort for now.
The reset values of the MDLR and PWRON registers are determined by the
SoC variant (730 vs 750) and board straps respectively.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/misc/npcm7xx_gcr.h | 43 ++++++
hw/misc/npcm7xx_gcr.c | 269 ++++++++++++++++++++++++++++++++++
MAINTAINERS | 8 +
hw/arm/Kconfig | 3 +
hw/misc/meson.build | 3 +
hw/misc/trace-events | 4 +
6 files changed, 330 insertions(+)
create mode 100644 include/hw/misc/npcm7xx_gcr.h
create mode 100644 hw/misc/npcm7xx_gcr.c
diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h
new file mode 100644
index 00000000000..13109d9d324
--- /dev/null
+++ b/include/hw/misc/npcm7xx_gcr.h
@@ -0,0 +1,43 @@
+/*
+ * Nuvoton NPCM7xx System Global Control Registers.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_GCR_H
+#define NPCM7XX_GCR_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+
+/*
+ * Number of registers in our device state structure. Don't change this without
+ * incrementing the version_id in the vmstate.
+ */
+#define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t))
+
+typedef struct NPCM7xxGCRState {
+ SysBusDevice parent;
+
+ MemoryRegion iomem;
+
+ uint32_t regs[NPCM7XX_GCR_NR_REGS];
+
+ uint32_t reset_pwron;
+ uint32_t reset_mdlr;
+ uint32_t reset_intcr3;
+} NPCM7xxGCRState;
+
+#define TYPE_NPCM7XX_GCR "npcm7xx-gcr"
+#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR)
+
+#endif /* NPCM7XX_GCR_H */
diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c
new file mode 100644
index 00000000000..745f6908097
--- /dev/null
+++ b/hw/misc/npcm7xx_gcr.c
@@ -0,0 +1,269 @@
+/*
+ * Nuvoton NPCM7xx System Global Control Registers.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/misc/npcm7xx_gcr.h"
+#include "hw/qdev-properties.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/cutils.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+
+#include "trace.h"
+
+#define NPCM7XX_GCR_MIN_DRAM_SIZE (128 * MiB)
+#define NPCM7XX_GCR_MAX_DRAM_SIZE (2 * GiB)
+
+enum NPCM7xxGCRRegisters {
+ NPCM7XX_GCR_PDID,
+ NPCM7XX_GCR_PWRON,
+ NPCM7XX_GCR_MFSEL1 = 0x0c / sizeof(uint32_t),
+ NPCM7XX_GCR_MFSEL2,
+ NPCM7XX_GCR_MISCPE,
+ NPCM7XX_GCR_SPSWC = 0x038 / sizeof(uint32_t),
+ NPCM7XX_GCR_INTCR,
+ NPCM7XX_GCR_INTSR,
+ NPCM7XX_GCR_HIFCR = 0x050 / sizeof(uint32_t),
+ NPCM7XX_GCR_INTCR2 = 0x060 / sizeof(uint32_t),
+ NPCM7XX_GCR_MFSEL3,
+ NPCM7XX_GCR_SRCNT,
+ NPCM7XX_GCR_RESSR,
+ NPCM7XX_GCR_RLOCKR1,
+ NPCM7XX_GCR_FLOCKR1,
+ NPCM7XX_GCR_DSCNT,
+ NPCM7XX_GCR_MDLR,
+ NPCM7XX_GCR_SCRPAD3,
+ NPCM7XX_GCR_SCRPAD2,
+ NPCM7XX_GCR_DAVCLVLR = 0x098 / sizeof(uint32_t),
+ NPCM7XX_GCR_INTCR3,
+ NPCM7XX_GCR_VSINTR = 0x0ac / sizeof(uint32_t),
+ NPCM7XX_GCR_MFSEL4,
+ NPCM7XX_GCR_CPBPNTR = 0x0c4 / sizeof(uint32_t),
+ NPCM7XX_GCR_CPCTL = 0x0d0 / sizeof(uint32_t),
+ NPCM7XX_GCR_CP2BST,
+ NPCM7XX_GCR_B2CPNT,
+ NPCM7XX_GCR_CPPCTL,
+ NPCM7XX_GCR_I2CSEGSEL,
+ NPCM7XX_GCR_I2CSEGCTL,
+ NPCM7XX_GCR_VSRCR,
+ NPCM7XX_GCR_MLOCKR,
+ NPCM7XX_GCR_SCRPAD = 0x013c / sizeof(uint32_t),
+ NPCM7XX_GCR_USB1PHYCTL,
+ NPCM7XX_GCR_USB2PHYCTL,
+ NPCM7XX_GCR_REGS_END,
+};
+
+static const uint32_t cold_reset_values[NPCM7XX_GCR_NR_REGS] = {
+ [NPCM7XX_GCR_PDID] = 0x04a92750, /* Poleg A1 */
+ [NPCM7XX_GCR_MISCPE] = 0x0000ffff,
+ [NPCM7XX_GCR_SPSWC] = 0x00000003,
+ [NPCM7XX_GCR_INTCR] = 0x0000035e,
+ [NPCM7XX_GCR_HIFCR] = 0x0000004e,
+ [NPCM7XX_GCR_INTCR2] = (1U << 19), /* DDR initialized */
+ [NPCM7XX_GCR_RESSR] = 0x80000000,
+ [NPCM7XX_GCR_DSCNT] = 0x000000c0,
+ [NPCM7XX_GCR_DAVCLVLR] = 0x5a00f3cf,
+ [NPCM7XX_GCR_SCRPAD] = 0x00000008,
+ [NPCM7XX_GCR_USB1PHYCTL] = 0x034730e4,
+ [NPCM7XX_GCR_USB2PHYCTL] = 0x034730e4,
+};
+
+static uint64_t npcm7xx_gcr_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxGCRState *s = opaque;
+
+ if (reg >= NPCM7XX_GCR_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: offset 0x%04" HWADDR_PRIx " out of range\n",
+ __func__, offset);
+ return 0;
+ }
+
+ trace_npcm7xx_gcr_read(offset, s->regs[reg]);
+
+ return s->regs[reg];
+}
+
+static void npcm7xx_gcr_write(void *opaque, hwaddr offset,
+ uint64_t v, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxGCRState *s = opaque;
+ uint32_t value = v;
+
+ trace_npcm7xx_gcr_write(offset, value);
+
+ if (reg >= NPCM7XX_GCR_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: offset 0x%04" HWADDR_PRIx " out of range\n",
+ __func__, offset);
+ return;
+ }
+
+ switch (reg) {
+ case NPCM7XX_GCR_PDID:
+ case NPCM7XX_GCR_PWRON:
+ case NPCM7XX_GCR_INTSR:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+ __func__, offset);
+ return;
+
+ case NPCM7XX_GCR_RESSR:
+ case NPCM7XX_GCR_CP2BST:
+ /* Write 1 to clear */
+ value = s->regs[reg] & ~value;
+ break;
+
+ case NPCM7XX_GCR_RLOCKR1:
+ case NPCM7XX_GCR_MDLR:
+ /* Write 1 to set */
+ value |= s->regs[reg];
+ break;
+ };
+
+ s->regs[reg] = value;
+}
+
+static const struct MemoryRegionOps npcm7xx_gcr_ops = {
+ .read = npcm7xx_gcr_read,
+ .write = npcm7xx_gcr_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxGCRState *s = NPCM7XX_GCR(obj);
+
+ QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values));
+
+ switch (type) {
+ case RESET_TYPE_COLD:
+ memcpy(s->regs, cold_reset_values, sizeof(s->regs));
+ s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron;
+ s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr;
+ s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3;
+ break;
+ }
+}
+
+static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp)
+{
+ ERRP_GUARD();
+ NPCM7xxGCRState *s = NPCM7XX_GCR(dev);
+ uint64_t dram_size;
+ Object *obj;
+
+ obj = object_property_get_link(OBJECT(dev), "dram-mr", errp);
+ if (!obj) {
+ error_prepend(errp, "%s: required dram-mr link not found: ", __func__);
+ return;
+ }
+ dram_size = memory_region_size(MEMORY_REGION(obj));
+ if (!is_power_of_2(dram_size) ||
+ dram_size < NPCM7XX_GCR_MIN_DRAM_SIZE ||
+ dram_size > NPCM7XX_GCR_MAX_DRAM_SIZE) {
+ g_autofree char *sz = size_to_str(dram_size);
+ g_autofree char *min_sz = size_to_str(NPCM7XX_GCR_MIN_DRAM_SIZE);
+ g_autofree char *max_sz = size_to_str(NPCM7XX_GCR_MAX_DRAM_SIZE);
+ error_setg(errp, "%s: unsupported DRAM size %s", __func__, sz);
+ error_append_hint(errp,
+ "DRAM size must be a power of two between %s and %s,"
+ " inclusive.\n", min_sz, max_sz);
+ return;
+ }
+
+ /* Power-on reset value */
+ s->reset_intcr3 = 0x00001002;
+
+ /*
+ * The GMMAP (Graphics Memory Map) field is used by u-boot to detect the
+ * DRAM size, and is normally initialized by the boot block as part of DRAM
+ * training. However, since we don't have a complete emulation of the
+ * memory controller and try to make it look like it has already been
+ * initialized, the boot block will skip this initialization, and we need
+ * to make sure this field is set correctly up front.
+ *
+ * WARNING: some versions of u-boot only looks at bits 8 and 9, so 2 GiB of
+ * DRAM will be interpreted as 128 MiB.
+ *
+ * https://github.com/Nuvoton-Israel/u-boot/blob/2aef993bd2aafeb5408dbaad0f3ce099ee40c4aa/board/nuvoton/poleg/poleg.c#L244
+ */
+ s->reset_intcr3 |= ctz64(dram_size / NPCM7XX_GCR_MIN_DRAM_SIZE) << 8;
+}
+
+static void npcm7xx_gcr_init(Object *obj)
+{
+ NPCM7xxGCRState *s = NPCM7XX_GCR(obj);
+
+ memory_region_init_io(&s->iomem, obj, &npcm7xx_gcr_ops, s,
+ TYPE_NPCM7XX_GCR, 4 * KiB);
+ sysbus_init_mmio(&s->parent, &s->iomem);
+}
+
+static const VMStateDescription vmstate_npcm7xx_gcr = {
+ .name = "npcm7xx-gcr",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, NPCM7xxGCRState, NPCM7XX_GCR_NR_REGS),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static Property npcm7xx_gcr_properties[] = {
+ DEFINE_PROP_UINT32("disabled-modules", NPCM7xxGCRState, reset_mdlr, 0),
+ DEFINE_PROP_UINT32("power-on-straps", NPCM7xxGCRState, reset_pwron, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_gcr_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ QEMU_BUILD_BUG_ON(NPCM7XX_GCR_REGS_END > NPCM7XX_GCR_NR_REGS);
+
+ dc->desc = "NPCM7xx System Global Control Registers";
+ dc->realize = npcm7xx_gcr_realize;
+ dc->vmsd = &vmstate_npcm7xx_gcr;
+ rc->phases.enter = npcm7xx_gcr_enter_reset;
+
+ device_class_set_props(dc, npcm7xx_gcr_properties);
+}
+
+static const TypeInfo npcm7xx_gcr_info = {
+ .name = TYPE_NPCM7XX_GCR,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxGCRState),
+ .instance_init = npcm7xx_gcr_init,
+ .class_init = npcm7xx_gcr_class_init,
+};
+
+static void npcm7xx_gcr_register_type(void)
+{
+ type_register_static(&npcm7xx_gcr_info);
+}
+type_init(npcm7xx_gcr_register_type);
diff --git a/MAINTAINERS b/MAINTAINERS
index d817ee6c6f8..c95a00c12dd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -750,6 +750,14 @@ S: Odd Fixes
F: hw/arm/musicpal.c
F: docs/system/arm/musicpal.rst
+Nuvoton NPCM7xx
+M: Havard Skinnemoen <hskinnemoen@google.com>
+M: Tyrone Ting <kfting@nuvoton.com>
+L: qemu-arm@nongnu.org
+S: Supported
+F: hw/*/npcm7xx*
+F: include/hw/*/npcm7xx*
+
nSeries
M: Andrzej Zaborowski <balrogg@gmail.com>
M: Peter Maydell <peter.maydell@linaro.org>
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index bc3a423940b..4aec9c63f87 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -355,6 +355,9 @@ config XLNX_VERSAL
select VIRTIO_MMIO
select UNIMP
+config NPCM7XX
+ bool
+
config FSL_IMX25
bool
select IMX
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index bd24132757a..e5cda41e1c5 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -56,6 +56,9 @@ softmmu_ss.add(when: 'CONFIG_IMX', if_true: files(
))
softmmu_ss.add(when: 'CONFIG_MILKYMIST', if_true: files('milkymist-hpdmc.c', 'milkymist-pfpu.c'))
softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
+ 'npcm7xx_gcr.c',
+))
softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
'omap_clk.c',
'omap_gpmc.c',
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 56a622d1e97..57b18cf63ef 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -110,6 +110,10 @@ mos6522_set_sr_int(void) "set sr_int"
mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
+# npcm7xx_gcr.c
+npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+
# stm32f4xx_syscfg.c
stm32f4xx_syscfg_set_irq(int gpio, int line, int level) "Interupt: GPIO: %d, Line: %d; Level: %d"
stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 20/36] hw/misc: Add NPCM7xx Clock Controller device model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (18 preceding siblings ...)
2020-09-14 14:06 ` [PULL 19/36] hw/misc: Add NPCM7xx System Global Control Registers device model Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 21/36] hw/timer: Add NPCM7xx Timer " Peter Maydell
` (15 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
Enough functionality to boot the Linux kernel has been implemented. This
includes:
- Correct power-on reset values so the various clock rates can be
accurately calculated.
- Clock enables stick around when written.
In addition, a best effort attempt to implement SECCNT and CNTR25M was
made even though I don't think the kernel needs them.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-3-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/misc/npcm7xx_clk.h | 48 ++++++
hw/misc/npcm7xx_clk.c | 266 ++++++++++++++++++++++++++++++++++
hw/misc/meson.build | 1 +
hw/misc/trace-events | 4 +
4 files changed, 319 insertions(+)
create mode 100644 include/hw/misc/npcm7xx_clk.h
create mode 100644 hw/misc/npcm7xx_clk.c
diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h
new file mode 100644
index 00000000000..cdcc9e85342
--- /dev/null
+++ b/include/hw/misc/npcm7xx_clk.h
@@ -0,0 +1,48 @@
+/*
+ * Nuvoton NPCM7xx Clock Control Registers.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_CLK_H
+#define NPCM7XX_CLK_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+
+/*
+ * The reference clock frequency for the timer modules, and the SECCNT and
+ * CNTR25M registers in this module, is always 25 MHz.
+ */
+#define NPCM7XX_TIMER_REF_HZ (25000000)
+
+/*
+ * Number of registers in our device state structure. Don't change this without
+ * incrementing the version_id in the vmstate.
+ */
+#define NPCM7XX_CLK_NR_REGS (0x70 / sizeof(uint32_t))
+
+typedef struct NPCM7xxCLKState {
+ SysBusDevice parent;
+
+ MemoryRegion iomem;
+
+ uint32_t regs[NPCM7XX_CLK_NR_REGS];
+
+ /* Time reference for SECCNT and CNTR25M, initialized by power on reset */
+ int64_t ref_ns;
+} NPCM7xxCLKState;
+
+#define TYPE_NPCM7XX_CLK "npcm7xx-clk"
+#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK)
+
+#endif /* NPCM7XX_CLK_H */
diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c
new file mode 100644
index 00000000000..21ab4200d1c
--- /dev/null
+++ b/hw/misc/npcm7xx_clk.c
@@ -0,0 +1,266 @@
+/*
+ * Nuvoton NPCM7xx Clock Control Registers.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/misc/npcm7xx_clk.h"
+#include "migration/vmstate.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+#define PLLCON_LOKI BIT(31)
+#define PLLCON_LOKS BIT(30)
+#define PLLCON_PWDEN BIT(12)
+
+enum NPCM7xxCLKRegisters {
+ NPCM7XX_CLK_CLKEN1,
+ NPCM7XX_CLK_CLKSEL,
+ NPCM7XX_CLK_CLKDIV1,
+ NPCM7XX_CLK_PLLCON0,
+ NPCM7XX_CLK_PLLCON1,
+ NPCM7XX_CLK_SWRSTR,
+ NPCM7XX_CLK_IPSRST1 = 0x20 / sizeof(uint32_t),
+ NPCM7XX_CLK_IPSRST2,
+ NPCM7XX_CLK_CLKEN2,
+ NPCM7XX_CLK_CLKDIV2,
+ NPCM7XX_CLK_CLKEN3,
+ NPCM7XX_CLK_IPSRST3,
+ NPCM7XX_CLK_WD0RCR,
+ NPCM7XX_CLK_WD1RCR,
+ NPCM7XX_CLK_WD2RCR,
+ NPCM7XX_CLK_SWRSTC1,
+ NPCM7XX_CLK_SWRSTC2,
+ NPCM7XX_CLK_SWRSTC3,
+ NPCM7XX_CLK_SWRSTC4,
+ NPCM7XX_CLK_PLLCON2,
+ NPCM7XX_CLK_CLKDIV3,
+ NPCM7XX_CLK_CORSTC,
+ NPCM7XX_CLK_PLLCONG,
+ NPCM7XX_CLK_AHBCKFI,
+ NPCM7XX_CLK_SECCNT,
+ NPCM7XX_CLK_CNTR25M,
+ NPCM7XX_CLK_REGS_END,
+};
+
+/*
+ * These reset values were taken from version 0.91 of the NPCM750R data sheet.
+ *
+ * All are loaded on power-up reset. CLKENx and SWRSTR should also be loaded on
+ * core domain reset, but this reset type is not yet supported by QEMU.
+ */
+static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = {
+ [NPCM7XX_CLK_CLKEN1] = 0xffffffff,
+ [NPCM7XX_CLK_CLKSEL] = 0x004aaaaa,
+ [NPCM7XX_CLK_CLKDIV1] = 0x5413f855,
+ [NPCM7XX_CLK_PLLCON0] = 0x00222101 | PLLCON_LOKI,
+ [NPCM7XX_CLK_PLLCON1] = 0x00202101 | PLLCON_LOKI,
+ [NPCM7XX_CLK_IPSRST1] = 0x00001000,
+ [NPCM7XX_CLK_IPSRST2] = 0x80000000,
+ [NPCM7XX_CLK_CLKEN2] = 0xffffffff,
+ [NPCM7XX_CLK_CLKDIV2] = 0xaa4f8f9f,
+ [NPCM7XX_CLK_CLKEN3] = 0xffffffff,
+ [NPCM7XX_CLK_IPSRST3] = 0x03000000,
+ [NPCM7XX_CLK_WD0RCR] = 0xffffffff,
+ [NPCM7XX_CLK_WD1RCR] = 0xffffffff,
+ [NPCM7XX_CLK_WD2RCR] = 0xffffffff,
+ [NPCM7XX_CLK_SWRSTC1] = 0x00000003,
+ [NPCM7XX_CLK_PLLCON2] = 0x00c02105 | PLLCON_LOKI,
+ [NPCM7XX_CLK_CORSTC] = 0x04000003,
+ [NPCM7XX_CLK_PLLCONG] = 0x01228606 | PLLCON_LOKI,
+ [NPCM7XX_CLK_AHBCKFI] = 0x000000c8,
+};
+
+static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxCLKState *s = opaque;
+ int64_t now_ns;
+ uint32_t value = 0;
+
+ if (reg >= NPCM7XX_CLK_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: offset 0x%04" HWADDR_PRIx " out of range\n",
+ __func__, offset);
+ return 0;
+ }
+
+ switch (reg) {
+ case NPCM7XX_CLK_SWRSTR:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: register @ 0x%04" HWADDR_PRIx " is write-only\n",
+ __func__, offset);
+ break;
+
+ case NPCM7XX_CLK_SECCNT:
+ now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ value = (now_ns - s->ref_ns) / NANOSECONDS_PER_SECOND;
+ break;
+
+ case NPCM7XX_CLK_CNTR25M:
+ now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ /*
+ * This register counts 25 MHz cycles, updating every 640 ns. It rolls
+ * over to zero every second.
+ *
+ * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000.
+ */
+ value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_TIMER_REF_HZ;
+ break;
+
+ default:
+ value = s->regs[reg];
+ break;
+ };
+
+ trace_npcm7xx_clk_read(offset, value);
+
+ return value;
+}
+
+static void npcm7xx_clk_write(void *opaque, hwaddr offset,
+ uint64_t v, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxCLKState *s = opaque;
+ uint32_t value = v;
+
+ trace_npcm7xx_clk_write(offset, value);
+
+ if (reg >= NPCM7XX_CLK_NR_REGS) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: offset 0x%04" HWADDR_PRIx " out of range\n",
+ __func__, offset);
+ return;
+ }
+
+ switch (reg) {
+ case NPCM7XX_CLK_SWRSTR:
+ qemu_log_mask(LOG_UNIMP, "%s: SW reset not implemented: 0x%02x\n",
+ __func__, value);
+ value = 0;
+ break;
+
+ case NPCM7XX_CLK_PLLCON0:
+ case NPCM7XX_CLK_PLLCON1:
+ case NPCM7XX_CLK_PLLCON2:
+ case NPCM7XX_CLK_PLLCONG:
+ if (value & PLLCON_PWDEN) {
+ /* Power down -- clear lock and indicate loss of lock */
+ value &= ~PLLCON_LOKI;
+ value |= PLLCON_LOKS;
+ } else {
+ /* Normal mode -- assume always locked */
+ value |= PLLCON_LOKI;
+ /* Keep LOKS unchanged unless cleared by writing 1 */
+ if (value & PLLCON_LOKS) {
+ value &= ~PLLCON_LOKS;
+ } else {
+ value |= (value & PLLCON_LOKS);
+ }
+ }
+ break;
+
+ case NPCM7XX_CLK_CNTR25M:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+ __func__, offset);
+ return;
+ }
+
+ s->regs[reg] = value;
+}
+
+static const struct MemoryRegionOps npcm7xx_clk_ops = {
+ .read = npcm7xx_clk_read,
+ .write = npcm7xx_clk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void npcm7xx_clk_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
+
+ QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values));
+
+ switch (type) {
+ case RESET_TYPE_COLD:
+ memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values));
+ s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ return;
+ }
+
+ /*
+ * A small number of registers need to be reset on a core domain reset,
+ * but no such reset type exists yet.
+ */
+ qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.",
+ __func__, type);
+}
+
+static void npcm7xx_clk_init(Object *obj)
+{
+ NPCM7xxCLKState *s = NPCM7XX_CLK(obj);
+
+ memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s,
+ TYPE_NPCM7XX_CLK, 4 * KiB);
+ sysbus_init_mmio(&s->parent, &s->iomem);
+}
+
+static const VMStateDescription vmstate_npcm7xx_clk = {
+ .name = "npcm7xx-clk",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS),
+ VMSTATE_INT64(ref_ns, NPCM7xxCLKState),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static void npcm7xx_clk_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM7XX_CLK_NR_REGS);
+
+ dc->desc = "NPCM7xx Clock Control Registers";
+ dc->vmsd = &vmstate_npcm7xx_clk;
+ rc->phases.enter = npcm7xx_clk_enter_reset;
+}
+
+static const TypeInfo npcm7xx_clk_info = {
+ .name = TYPE_NPCM7XX_CLK,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxCLKState),
+ .instance_init = npcm7xx_clk_init,
+ .class_init = npcm7xx_clk_class_init,
+};
+
+static void npcm7xx_clk_register_type(void)
+{
+ type_register_static(&npcm7xx_clk_info);
+}
+type_init(npcm7xx_clk_register_type);
diff --git a/hw/misc/meson.build b/hw/misc/meson.build
index e5cda41e1c5..793d45b1dc4 100644
--- a/hw/misc/meson.build
+++ b/hw/misc/meson.build
@@ -57,6 +57,7 @@ softmmu_ss.add(when: 'CONFIG_IMX', if_true: files(
softmmu_ss.add(when: 'CONFIG_MILKYMIST', if_true: files('milkymist-hpdmc.c', 'milkymist-pfpu.c'))
softmmu_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mst_fpga.c'))
softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files(
+ 'npcm7xx_clk.c',
'npcm7xx_gcr.c',
))
softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files(
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 57b18cf63ef..6054f9adf35 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -110,6 +110,10 @@ mos6522_set_sr_int(void) "set sr_int"
mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
+# npcm7xx_clk.c
+npcm7xx_clk_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_clk_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+
# npcm7xx_gcr.c
npcm7xx_gcr_read(uint64_t offset, uint32_t value) " offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
npcm7xx_gcr_write(uint64_t offset, uint32_t value) "offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 21/36] hw/timer: Add NPCM7xx Timer device model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (19 preceding siblings ...)
2020-09-14 14:06 ` [PULL 20/36] hw/misc: Add NPCM7xx Clock Controller " Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 22/36] hw/arm: Add NPCM730 and NPCM750 SoC models Peter Maydell
` (14 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
The NPCM730 and NPCM750 SoCs have three timer modules each holding five
timers and some shared registers (e.g. interrupt status).
Each timer runs at 25 MHz divided by a prescaler, and counts down from a
configurable initial value to zero. When zero is reached, the interrupt
flag for the timer is set, and the timer is disabled (one-shot mode) or
reloaded from its initial value (periodic mode).
This implementation is sufficient to boot a Linux kernel configured for
NPCM750. Note that the kernel does not seem to actually turn on the
interrupts.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-4-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/timer/npcm7xx_timer.h | 78 +++++
hw/timer/npcm7xx_timer.c | 543 +++++++++++++++++++++++++++++++
hw/timer/meson.build | 1 +
hw/timer/trace-events | 5 +
4 files changed, 627 insertions(+)
create mode 100644 include/hw/timer/npcm7xx_timer.h
create mode 100644 hw/timer/npcm7xx_timer.c
diff --git a/include/hw/timer/npcm7xx_timer.h b/include/hw/timer/npcm7xx_timer.h
new file mode 100644
index 00000000000..878a365a790
--- /dev/null
+++ b/include/hw/timer/npcm7xx_timer.h
@@ -0,0 +1,78 @@
+/*
+ * Nuvoton NPCM7xx Timer Controller
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_TIMER_H
+#define NPCM7XX_TIMER_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+
+/* Each Timer Module (TIM) instance holds five 25 MHz timers. */
+#define NPCM7XX_TIMERS_PER_CTRL (5)
+
+/*
+ * Number of registers in our device state structure. Don't change this without
+ * incrementing the version_id in the vmstate.
+ */
+#define NPCM7XX_TIMER_NR_REGS (0x54 / sizeof(uint32_t))
+
+typedef struct NPCM7xxTimerCtrlState NPCM7xxTimerCtrlState;
+
+/**
+ * struct NPCM7xxTimer - Individual timer state.
+ * @irq: GIC interrupt line to fire on expiration (if enabled).
+ * @qtimer: QEMU timer that notifies us on expiration.
+ * @expires_ns: Absolute virtual expiration time.
+ * @remaining_ns: Remaining time until expiration if timer is paused.
+ * @tcsr: The Timer Control and Status Register.
+ * @ticr: The Timer Initial Count Register.
+ */
+typedef struct NPCM7xxTimer {
+ NPCM7xxTimerCtrlState *ctrl;
+
+ qemu_irq irq;
+ QEMUTimer qtimer;
+ int64_t expires_ns;
+ int64_t remaining_ns;
+
+ uint32_t tcsr;
+ uint32_t ticr;
+} NPCM7xxTimer;
+
+/**
+ * struct NPCM7xxTimerCtrlState - Timer Module device state.
+ * @parent: System bus device.
+ * @iomem: Memory region through which registers are accessed.
+ * @tisr: The Timer Interrupt Status Register.
+ * @wtcr: The Watchdog Timer Control Register.
+ * @timer: The five individual timers managed by this module.
+ */
+struct NPCM7xxTimerCtrlState {
+ SysBusDevice parent;
+
+ MemoryRegion iomem;
+
+ uint32_t tisr;
+ uint32_t wtcr;
+
+ NPCM7xxTimer timer[NPCM7XX_TIMERS_PER_CTRL];
+};
+
+#define TYPE_NPCM7XX_TIMER "npcm7xx-timer"
+#define NPCM7XX_TIMER(obj) \
+ OBJECT_CHECK(NPCM7xxTimerCtrlState, (obj), TYPE_NPCM7XX_TIMER)
+
+#endif /* NPCM7XX_TIMER_H */
diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c
new file mode 100644
index 00000000000..5703e43d404
--- /dev/null
+++ b/hw/timer/npcm7xx_timer.c
@@ -0,0 +1,543 @@
+/*
+ * Nuvoton NPCM7xx Timer Controller
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/irq.h"
+#include "hw/misc/npcm7xx_clk.h"
+#include "hw/timer/npcm7xx_timer.h"
+#include "migration/vmstate.h"
+#include "qemu/bitops.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/timer.h"
+#include "qemu/units.h"
+#include "trace.h"
+
+/* 32-bit register indices. */
+enum NPCM7xxTimerRegisters {
+ NPCM7XX_TIMER_TCSR0,
+ NPCM7XX_TIMER_TCSR1,
+ NPCM7XX_TIMER_TICR0,
+ NPCM7XX_TIMER_TICR1,
+ NPCM7XX_TIMER_TDR0,
+ NPCM7XX_TIMER_TDR1,
+ NPCM7XX_TIMER_TISR,
+ NPCM7XX_TIMER_WTCR,
+ NPCM7XX_TIMER_TCSR2,
+ NPCM7XX_TIMER_TCSR3,
+ NPCM7XX_TIMER_TICR2,
+ NPCM7XX_TIMER_TICR3,
+ NPCM7XX_TIMER_TDR2,
+ NPCM7XX_TIMER_TDR3,
+ NPCM7XX_TIMER_TCSR4 = 0x0040 / sizeof(uint32_t),
+ NPCM7XX_TIMER_TICR4 = 0x0048 / sizeof(uint32_t),
+ NPCM7XX_TIMER_TDR4 = 0x0050 / sizeof(uint32_t),
+ NPCM7XX_TIMER_REGS_END,
+};
+
+/* Register field definitions. */
+#define NPCM7XX_TCSR_CEN BIT(30)
+#define NPCM7XX_TCSR_IE BIT(29)
+#define NPCM7XX_TCSR_PERIODIC BIT(27)
+#define NPCM7XX_TCSR_CRST BIT(26)
+#define NPCM7XX_TCSR_CACT BIT(25)
+#define NPCM7XX_TCSR_RSVD 0x01ffff00
+#define NPCM7XX_TCSR_PRESCALE_START 0
+#define NPCM7XX_TCSR_PRESCALE_LEN 8
+
+/*
+ * Returns the index of timer in the tc->timer array. This can be used to
+ * locate the registers that belong to this timer.
+ */
+static int npcm7xx_timer_index(NPCM7xxTimerCtrlState *tc, NPCM7xxTimer *timer)
+{
+ int index = timer - tc->timer;
+
+ g_assert(index >= 0 && index < NPCM7XX_TIMERS_PER_CTRL);
+
+ return index;
+}
+
+/* Return the value by which to divide the reference clock rate. */
+static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
+{
+ return extract32(tcsr, NPCM7XX_TCSR_PRESCALE_START,
+ NPCM7XX_TCSR_PRESCALE_LEN) + 1;
+}
+
+/* Convert a timer cycle count to a time interval in nanoseconds. */
+static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
+{
+ int64_t ns = count;
+
+ ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
+ ns *= npcm7xx_tcsr_prescaler(t->tcsr);
+
+ return ns;
+}
+
+/* Convert a time interval in nanoseconds to a timer cycle count. */
+static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
+{
+ int64_t count;
+
+ count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
+ count /= npcm7xx_tcsr_prescaler(t->tcsr);
+
+ return count;
+}
+
+/*
+ * Raise the interrupt line if there's a pending interrupt and interrupts are
+ * enabled for this timer. If not, lower it.
+ */
+static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t)
+{
+ NPCM7xxTimerCtrlState *tc = t->ctrl;
+ int index = npcm7xx_timer_index(tc, t);
+ bool pending = (t->tcsr & NPCM7XX_TCSR_IE) && (tc->tisr & BIT(index));
+
+ qemu_set_irq(t->irq, pending);
+ trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending);
+}
+
+/* Start or resume the timer. */
+static void npcm7xx_timer_start(NPCM7xxTimer *t)
+{
+ int64_t now;
+
+ now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ t->expires_ns = now + t->remaining_ns;
+ timer_mod(&t->qtimer, t->expires_ns);
+}
+
+/*
+ * Called when the counter reaches zero. Sets the interrupt flag, and either
+ * restarts or disables the timer.
+ */
+static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t)
+{
+ NPCM7xxTimerCtrlState *tc = t->ctrl;
+ int index = npcm7xx_timer_index(tc, t);
+
+ tc->tisr |= BIT(index);
+
+ if (t->tcsr & NPCM7XX_TCSR_PERIODIC) {
+ t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ }
+ } else {
+ t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT);
+ }
+
+ npcm7xx_timer_check_interrupt(t);
+}
+
+/* Stop counting. Record the time remaining so we can continue later. */
+static void npcm7xx_timer_pause(NPCM7xxTimer *t)
+{
+ int64_t now;
+
+ timer_del(&t->qtimer);
+ now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ t->remaining_ns = t->expires_ns - now;
+ if (t->remaining_ns <= 0) {
+ npcm7xx_timer_reached_zero(t);
+ }
+}
+
+/*
+ * Restart the timer from its initial value. If the timer was enabled and stays
+ * enabled, adjust the QEMU timer according to the new count. If the timer is
+ * transitioning from disabled to enabled, the caller is expected to start the
+ * timer later.
+ */
+static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr)
+{
+ t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
+
+ if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ }
+}
+
+/* Register read and write handlers */
+
+static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t)
+{
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ return npcm7xx_timer_ns_to_count(t, t->expires_ns - now);
+ }
+
+ return npcm7xx_timer_ns_to_count(t, t->remaining_ns);
+}
+
+static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr)
+{
+ uint32_t old_tcsr = t->tcsr;
+ uint32_t tdr;
+
+ if (new_tcsr & NPCM7XX_TCSR_RSVD) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits in 0x%08x ignored\n",
+ __func__, new_tcsr);
+ new_tcsr &= ~NPCM7XX_TCSR_RSVD;
+ }
+ if (new_tcsr & NPCM7XX_TCSR_CACT) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only bits in 0x%08x ignored\n",
+ __func__, new_tcsr);
+ new_tcsr &= ~NPCM7XX_TCSR_CACT;
+ }
+ if ((new_tcsr & NPCM7XX_TCSR_CRST) && (new_tcsr & NPCM7XX_TCSR_CEN)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: both CRST and CEN set; ignoring CEN.\n",
+ __func__);
+ new_tcsr &= ~NPCM7XX_TCSR_CEN;
+ }
+
+ /* Calculate the value of TDR before potentially changing the prescaler. */
+ tdr = npcm7xx_timer_read_tdr(t);
+
+ t->tcsr = (t->tcsr & NPCM7XX_TCSR_CACT) | new_tcsr;
+
+ if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) {
+ /* Recalculate time remaining based on the current TDR value. */
+ t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr);
+ if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_start(t);
+ }
+ }
+
+ if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_IE) {
+ npcm7xx_timer_check_interrupt(t);
+ }
+ if (new_tcsr & NPCM7XX_TCSR_CRST) {
+ npcm7xx_timer_restart(t, old_tcsr);
+ t->tcsr &= ~NPCM7XX_TCSR_CRST;
+ }
+ if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) {
+ if (new_tcsr & NPCM7XX_TCSR_CEN) {
+ t->tcsr |= NPCM7XX_TCSR_CACT;
+ npcm7xx_timer_start(t);
+ } else {
+ t->tcsr &= ~NPCM7XX_TCSR_CACT;
+ npcm7xx_timer_pause(t);
+ }
+ }
+}
+
+static void npcm7xx_timer_write_ticr(NPCM7xxTimer *t, uint32_t new_ticr)
+{
+ t->ticr = new_ticr;
+
+ npcm7xx_timer_restart(t, t->tcsr);
+}
+
+static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value)
+{
+ int i;
+
+ s->tisr &= ~value;
+ for (i = 0; i < ARRAY_SIZE(s->timer); i++) {
+ if (value & (1U << i)) {
+ npcm7xx_timer_check_interrupt(&s->timer[i]);
+ }
+ }
+}
+
+static hwaddr npcm7xx_tcsr_index(hwaddr reg)
+{
+ switch (reg) {
+ case NPCM7XX_TIMER_TCSR0:
+ return 0;
+ case NPCM7XX_TIMER_TCSR1:
+ return 1;
+ case NPCM7XX_TIMER_TCSR2:
+ return 2;
+ case NPCM7XX_TIMER_TCSR3:
+ return 3;
+ case NPCM7XX_TIMER_TCSR4:
+ return 4;
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static hwaddr npcm7xx_ticr_index(hwaddr reg)
+{
+ switch (reg) {
+ case NPCM7XX_TIMER_TICR0:
+ return 0;
+ case NPCM7XX_TIMER_TICR1:
+ return 1;
+ case NPCM7XX_TIMER_TICR2:
+ return 2;
+ case NPCM7XX_TIMER_TICR3:
+ return 3;
+ case NPCM7XX_TIMER_TICR4:
+ return 4;
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static hwaddr npcm7xx_tdr_index(hwaddr reg)
+{
+ switch (reg) {
+ case NPCM7XX_TIMER_TDR0:
+ return 0;
+ case NPCM7XX_TIMER_TDR1:
+ return 1;
+ case NPCM7XX_TIMER_TDR2:
+ return 2;
+ case NPCM7XX_TIMER_TDR3:
+ return 3;
+ case NPCM7XX_TIMER_TDR4:
+ return 4;
+ default:
+ g_assert_not_reached();
+ }
+}
+
+static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+ NPCM7xxTimerCtrlState *s = opaque;
+ uint64_t value = 0;
+ hwaddr reg;
+
+ reg = offset / sizeof(uint32_t);
+ switch (reg) {
+ case NPCM7XX_TIMER_TCSR0:
+ case NPCM7XX_TIMER_TCSR1:
+ case NPCM7XX_TIMER_TCSR2:
+ case NPCM7XX_TIMER_TCSR3:
+ case NPCM7XX_TIMER_TCSR4:
+ value = s->timer[npcm7xx_tcsr_index(reg)].tcsr;
+ break;
+
+ case NPCM7XX_TIMER_TICR0:
+ case NPCM7XX_TIMER_TICR1:
+ case NPCM7XX_TIMER_TICR2:
+ case NPCM7XX_TIMER_TICR3:
+ case NPCM7XX_TIMER_TICR4:
+ value = s->timer[npcm7xx_ticr_index(reg)].ticr;
+ break;
+
+ case NPCM7XX_TIMER_TDR0:
+ case NPCM7XX_TIMER_TDR1:
+ case NPCM7XX_TIMER_TDR2:
+ case NPCM7XX_TIMER_TDR3:
+ case NPCM7XX_TIMER_TDR4:
+ value = npcm7xx_timer_read_tdr(&s->timer[npcm7xx_tdr_index(reg)]);
+ break;
+
+ case NPCM7XX_TIMER_TISR:
+ value = s->tisr;
+ break;
+
+ case NPCM7XX_TIMER_WTCR:
+ value = s->wtcr;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+ __func__, offset);
+ break;
+ }
+
+ trace_npcm7xx_timer_read(DEVICE(s)->canonical_path, offset, value);
+
+ return value;
+}
+
+static void npcm7xx_timer_write(void *opaque, hwaddr offset,
+ uint64_t v, unsigned size)
+{
+ uint32_t reg = offset / sizeof(uint32_t);
+ NPCM7xxTimerCtrlState *s = opaque;
+ uint32_t value = v;
+
+ trace_npcm7xx_timer_write(DEVICE(s)->canonical_path, offset, value);
+
+ switch (reg) {
+ case NPCM7XX_TIMER_TCSR0:
+ case NPCM7XX_TIMER_TCSR1:
+ case NPCM7XX_TIMER_TCSR2:
+ case NPCM7XX_TIMER_TCSR3:
+ case NPCM7XX_TIMER_TCSR4:
+ npcm7xx_timer_write_tcsr(&s->timer[npcm7xx_tcsr_index(reg)], value);
+ return;
+
+ case NPCM7XX_TIMER_TICR0:
+ case NPCM7XX_TIMER_TICR1:
+ case NPCM7XX_TIMER_TICR2:
+ case NPCM7XX_TIMER_TICR3:
+ case NPCM7XX_TIMER_TICR4:
+ npcm7xx_timer_write_ticr(&s->timer[npcm7xx_ticr_index(reg)], value);
+ return;
+
+ case NPCM7XX_TIMER_TDR0:
+ case NPCM7XX_TIMER_TDR1:
+ case NPCM7XX_TIMER_TDR2:
+ case NPCM7XX_TIMER_TDR3:
+ case NPCM7XX_TIMER_TDR4:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
+ __func__, offset);
+ return;
+
+ case NPCM7XX_TIMER_TISR:
+ npcm7xx_timer_write_tisr(s, value);
+ return;
+
+ case NPCM7XX_TIMER_WTCR:
+ qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n",
+ __func__, value);
+ return;
+ }
+
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
+ __func__, offset);
+}
+
+static const struct MemoryRegionOps npcm7xx_timer_ops = {
+ .read = npcm7xx_timer_read,
+ .write = npcm7xx_timer_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+/* Called when the QEMU timer expires. */
+static void npcm7xx_timer_expired(void *opaque)
+{
+ NPCM7xxTimer *t = opaque;
+
+ if (t->tcsr & NPCM7XX_TCSR_CEN) {
+ npcm7xx_timer_reached_zero(t);
+ }
+}
+
+static void npcm7xx_timer_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ NPCM7xxTimer *t = &s->timer[i];
+
+ timer_del(&t->qtimer);
+ t->expires_ns = 0;
+ t->remaining_ns = 0;
+ t->tcsr = 0x00000005;
+ t->ticr = 0x00000000;
+ }
+
+ s->tisr = 0x00000000;
+ s->wtcr = 0x00000400;
+}
+
+static void npcm7xx_timer_hold_reset(Object *obj)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ qemu_irq_lower(s->timer[i].irq);
+ }
+}
+
+static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
+ SysBusDevice *sbd = &s->parent;
+ int i;
+
+ for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
+ NPCM7xxTimer *t = &s->timer[i];
+ t->ctrl = s;
+ timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t);
+ sysbus_init_irq(sbd, &t->irq);
+ }
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
+ TYPE_NPCM7XX_TIMER, 4 * KiB);
+ sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static const VMStateDescription vmstate_npcm7xx_timer = {
+ .name = "npcm7xx-timer",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_TIMER(qtimer, NPCM7xxTimer),
+ VMSTATE_INT64(expires_ns, NPCM7xxTimer),
+ VMSTATE_INT64(remaining_ns, NPCM7xxTimer),
+ VMSTATE_UINT32(tcsr, NPCM7xxTimer),
+ VMSTATE_UINT32(ticr, NPCM7xxTimer),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
+ .name = "npcm7xx-timer-ctrl",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
+ VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState),
+ VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
+ NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
+ NPCM7xxTimer),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
+
+ dc->desc = "NPCM7xx Timer Controller";
+ dc->realize = npcm7xx_timer_realize;
+ dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
+ rc->phases.enter = npcm7xx_timer_enter_reset;
+ rc->phases.hold = npcm7xx_timer_hold_reset;
+}
+
+static const TypeInfo npcm7xx_timer_info = {
+ .name = TYPE_NPCM7XX_TIMER,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxTimerCtrlState),
+ .class_init = npcm7xx_timer_class_init,
+};
+
+static void npcm7xx_timer_register_type(void)
+{
+ type_register_static(&npcm7xx_timer_info);
+}
+type_init(npcm7xx_timer_register_type);
diff --git a/hw/timer/meson.build b/hw/timer/meson.build
index 9f0a267c835..be343f68fed 100644
--- a/hw/timer/meson.build
+++ b/hw/timer/meson.build
@@ -23,6 +23,7 @@ softmmu_ss.add(when: 'CONFIG_LM32', if_true: files('lm32_timer.c'))
softmmu_ss.add(when: 'CONFIG_MILKYMIST', if_true: files('milkymist-sysctl.c'))
softmmu_ss.add(when: 'CONFIG_MIPS_CPS', if_true: files('mips_gictimer.c'))
softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-timer.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_timer.c'))
softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_timer.c'))
softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gptimer.c'))
softmmu_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_synctimer.c'))
diff --git a/hw/timer/trace-events b/hw/timer/trace-events
index 1537c3e6ecb..b996d992000 100644
--- a/hw/timer/trace-events
+++ b/hw/timer/trace-events
@@ -66,6 +66,11 @@ cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK A
cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset"
+# npcm7xx_timer.c
+npcm7xx_timer_read(const char *id, uint64_t offset, uint64_t value) " %s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
+npcm7xx_timer_write(const char *id, uint64_t offset, uint64_t value) "%s offset: 0x%04" PRIx64 " value 0x%08" PRIx64
+npcm7xx_timer_irq(const char *id, int timer, int state) "%s timer %d state %d"
+
# nrf51_timer.c
nrf51_timer_read(uint8_t timer_id, uint64_t addr, uint32_t value, unsigned size) "timer %u read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
nrf51_timer_write(uint8_t timer_id, uint64_t addr, uint32_t value, unsigned size) "timer %u write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 22/36] hw/arm: Add NPCM730 and NPCM750 SoC models
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (20 preceding siblings ...)
2020-09-14 14:06 ` [PULL 21/36] hw/timer: Add NPCM7xx Timer " Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 23/36] hw/arm: Add two NPCM7xx-based machines Peter Maydell
` (13 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
The Nuvoton NPCM7xx SoC family are used to implement Baseboard
Management Controllers in servers. While the family includes four SoCs,
this patch implements limited support for two of them: NPCM730 (targeted
for Data Center applications) and NPCM750 (targeted for Enterprise
applications).
This patch includes little more than the bare minimum needed to boot a
Linux kernel built with NPCM7xx support in direct-kernel mode:
- Two Cortex-A9 CPU cores with built-in periperhals.
- Global Configuration Registers.
- Clock Management.
- 3 Timer Modules with 5 timers each.
- 4 serial ports.
The chips themselves have a lot more features, some of which will be
added to the model at a later stage.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-5-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/npcm7xx.h | 85 ++++++++
hw/arm/npcm7xx.c | 407 +++++++++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 5 +
hw/arm/meson.build | 1 +
4 files changed, 498 insertions(+)
create mode 100644 include/hw/arm/npcm7xx.h
create mode 100644 hw/arm/npcm7xx.c
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
new file mode 100644
index 00000000000..e68d9c79e65
--- /dev/null
+++ b/include/hw/arm/npcm7xx.h
@@ -0,0 +1,85 @@
+/*
+ * Nuvoton NPCM7xx SoC family.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_H
+#define NPCM7XX_H
+
+#include "hw/boards.h"
+#include "hw/cpu/a9mpcore.h"
+#include "hw/misc/npcm7xx_clk.h"
+#include "hw/misc/npcm7xx_gcr.h"
+#include "hw/timer/npcm7xx_timer.h"
+#include "target/arm/cpu.h"
+
+#define NPCM7XX_MAX_NUM_CPUS (2)
+
+/* The first half of the address space is reserved for DDR4 DRAM. */
+#define NPCM7XX_DRAM_BA (0x00000000)
+#define NPCM7XX_DRAM_SZ (2 * GiB)
+
+/* Magic addresses for setting up direct kernel booting and SMP boot stubs. */
+#define NPCM7XX_LOADER_START (0x00000000) /* Start of SDRAM */
+#define NPCM7XX_SMP_LOADER_START (0xffff0000) /* Boot ROM */
+#define NPCM7XX_SMP_BOOTREG_ADDR (0xf080013c) /* GCR.SCRPAD */
+#define NPCM7XX_GIC_CPU_IF_ADDR (0xf03fe100) /* GIC within A9 */
+
+typedef struct NPCM7xxState {
+ DeviceState parent;
+
+ ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS];
+ A9MPPrivState a9mpcore;
+
+ MemoryRegion sram;
+ MemoryRegion irom;
+ MemoryRegion ram3;
+ MemoryRegion *dram;
+
+ NPCM7xxGCRState gcr;
+ NPCM7xxCLKState clk;
+ NPCM7xxTimerCtrlState tim[3];
+} NPCM7xxState;
+
+#define TYPE_NPCM7XX "npcm7xx"
+#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX)
+
+#define TYPE_NPCM730 "npcm730"
+#define TYPE_NPCM750 "npcm750"
+
+typedef struct NPCM7xxClass {
+ DeviceClass parent;
+
+ /* Bitmask of modules that are permanently disabled on this chip. */
+ uint32_t disabled_modules;
+ /* Number of CPU cores enabled in this SoC class (may be 1 or 2). */
+ uint32_t num_cpus;
+} NPCM7xxClass;
+
+#define NPCM7XX_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX)
+#define NPCM7XX_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX)
+
+/**
+ * npcm7xx_load_kernel - Loads memory with everything needed to boot
+ * @machine - The machine containing the SoC to be booted.
+ * @soc - The SoC containing the CPU to be booted.
+ *
+ * This will set up the ARM boot info structure for the specific NPCM7xx
+ * derivative and call arm_load_kernel() to set up loading of the kernel, etc.
+ * into memory, if requested by the user.
+ */
+void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc);
+
+#endif /* NPCM7XX_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
new file mode 100644
index 00000000000..9669ac5fa03
--- /dev/null
+++ b/hw/arm/npcm7xx.c
@@ -0,0 +1,407 @@
+/*
+ * Nuvoton NPCM7xx SoC family.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "exec/address-spaces.h"
+#include "hw/arm/boot.h"
+#include "hw/arm/npcm7xx.h"
+#include "hw/char/serial.h"
+#include "hw/loader.h"
+#include "hw/misc/unimp.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/units.h"
+#include "sysemu/sysemu.h"
+
+/*
+ * This covers the whole MMIO space. We'll use this to catch any MMIO accesses
+ * that aren't handled by any device.
+ */
+#define NPCM7XX_MMIO_BA (0x80000000)
+#define NPCM7XX_MMIO_SZ (0x7ffd0000)
+
+/* Core system modules. */
+#define NPCM7XX_L2C_BA (0xf03fc000)
+#define NPCM7XX_CPUP_BA (0xf03fe000)
+#define NPCM7XX_GCR_BA (0xf0800000)
+#define NPCM7XX_CLK_BA (0xf0801000)
+
+/* Internal AHB SRAM */
+#define NPCM7XX_RAM3_BA (0xc0008000)
+#define NPCM7XX_RAM3_SZ (4 * KiB)
+
+/* Memory blocks at the end of the address space */
+#define NPCM7XX_RAM2_BA (0xfffd0000)
+#define NPCM7XX_RAM2_SZ (128 * KiB)
+#define NPCM7XX_ROM_BA (0xffff0000)
+#define NPCM7XX_ROM_SZ (64 * KiB)
+
+/*
+ * Interrupt lines going into the GIC. This does not include internal Cortex-A9
+ * interrupts.
+ */
+enum NPCM7xxInterrupt {
+ NPCM7XX_UART0_IRQ = 2,
+ NPCM7XX_UART1_IRQ,
+ NPCM7XX_UART2_IRQ,
+ NPCM7XX_UART3_IRQ,
+ NPCM7XX_TIMER0_IRQ = 32, /* Timer Module 0 */
+ NPCM7XX_TIMER1_IRQ,
+ NPCM7XX_TIMER2_IRQ,
+ NPCM7XX_TIMER3_IRQ,
+ NPCM7XX_TIMER4_IRQ,
+ NPCM7XX_TIMER5_IRQ, /* Timer Module 1 */
+ NPCM7XX_TIMER6_IRQ,
+ NPCM7XX_TIMER7_IRQ,
+ NPCM7XX_TIMER8_IRQ,
+ NPCM7XX_TIMER9_IRQ,
+ NPCM7XX_TIMER10_IRQ, /* Timer Module 2 */
+ NPCM7XX_TIMER11_IRQ,
+ NPCM7XX_TIMER12_IRQ,
+ NPCM7XX_TIMER13_IRQ,
+ NPCM7XX_TIMER14_IRQ,
+};
+
+/* Total number of GIC interrupts, including internal Cortex-A9 interrupts. */
+#define NPCM7XX_NUM_IRQ (160)
+
+/* Register base address for each Timer Module */
+static const hwaddr npcm7xx_tim_addr[] = {
+ 0xf0008000,
+ 0xf0009000,
+ 0xf000a000,
+};
+
+/* Register base address for each 16550 UART */
+static const hwaddr npcm7xx_uart_addr[] = {
+ 0xf0001000,
+ 0xf0002000,
+ 0xf0003000,
+ 0xf0004000,
+};
+
+static void npcm7xx_write_secondary_boot(ARMCPU *cpu,
+ const struct arm_boot_info *info)
+{
+ /*
+ * The default smpboot stub halts the secondary CPU with a 'wfi'
+ * instruction, but the arch/arm/mach-npcm/platsmp.c in the Linux kernel
+ * does not send an IPI to wake it up, so the second CPU fails to boot. So
+ * we need to provide our own smpboot stub that can not use 'wfi', it has
+ * to spin the secondary CPU until the first CPU writes to the SCRPAD reg.
+ */
+ uint32_t smpboot[] = {
+ 0xe59f2018, /* ldr r2, bootreg_addr */
+ 0xe3a00000, /* mov r0, #0 */
+ 0xe5820000, /* str r0, [r2] */
+ 0xe320f002, /* wfe */
+ 0xe5921000, /* ldr r1, [r2] */
+ 0xe1110001, /* tst r1, r1 */
+ 0x0afffffb, /* beq <wfe> */
+ 0xe12fff11, /* bx r1 */
+ NPCM7XX_SMP_BOOTREG_ADDR,
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(smpboot); i++) {
+ smpboot[i] = tswap32(smpboot[i]);
+ }
+
+ rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot),
+ NPCM7XX_SMP_LOADER_START);
+}
+
+static struct arm_boot_info npcm7xx_binfo = {
+ .loader_start = NPCM7XX_LOADER_START,
+ .smp_loader_start = NPCM7XX_SMP_LOADER_START,
+ .smp_bootreg_addr = NPCM7XX_SMP_BOOTREG_ADDR,
+ .gic_cpu_if_addr = NPCM7XX_GIC_CPU_IF_ADDR,
+ .write_secondary_boot = npcm7xx_write_secondary_boot,
+ .board_id = -1,
+};
+
+void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc)
+{
+ NPCM7xxClass *sc = NPCM7XX_GET_CLASS(soc);
+
+ npcm7xx_binfo.ram_size = machine->ram_size;
+ npcm7xx_binfo.nb_cpus = sc->num_cpus;
+
+ arm_load_kernel(&soc->cpu[0], machine, &npcm7xx_binfo);
+}
+
+static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
+{
+ return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
+}
+
+static void npcm7xx_init(Object *obj)
+{
+ NPCM7xxState *s = NPCM7XX(obj);
+ int i;
+
+ for (i = 0; i < NPCM7XX_MAX_NUM_CPUS; i++) {
+ object_initialize_child(obj, "cpu[*]", &s->cpu[i],
+ ARM_CPU_TYPE_NAME("cortex-a9"));
+ }
+
+ object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV);
+ object_initialize_child(obj, "gcr", &s->gcr, TYPE_NPCM7XX_GCR);
+ object_property_add_alias(obj, "power-on-straps", OBJECT(&s->gcr),
+ "power-on-straps");
+ object_initialize_child(obj, "clk", &s->clk, TYPE_NPCM7XX_CLK);
+
+ for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+ object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
+ }
+}
+
+static void npcm7xx_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxState *s = NPCM7XX(dev);
+ NPCM7xxClass *nc = NPCM7XX_GET_CLASS(s);
+ int i;
+
+ if (memory_region_size(s->dram) > NPCM7XX_DRAM_SZ) {
+ error_setg(errp, "%s: NPCM7xx cannot address more than %" PRIu64
+ " MiB of DRAM", __func__, NPCM7XX_DRAM_SZ / MiB);
+ return;
+ }
+
+ /* CPUs */
+ for (i = 0; i < nc->num_cpus; i++) {
+ object_property_set_int(OBJECT(&s->cpu[i]), "mp-affinity",
+ arm_cpu_mp_affinity(i, NPCM7XX_MAX_NUM_CPUS),
+ &error_abort);
+ object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
+ NPCM7XX_GIC_CPU_IF_ADDR, &error_abort);
+ object_property_set_bool(OBJECT(&s->cpu[i]), "reset-hivecs", true,
+ &error_abort);
+
+ /* Disable security extensions. */
+ object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", false,
+ &error_abort);
+
+ if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
+ return;
+ }
+ }
+
+ /* A9MPCORE peripherals. Can only fail if we pass bad parameters here. */
+ object_property_set_int(OBJECT(&s->a9mpcore), "num-cpu", nc->num_cpus,
+ &error_abort);
+ object_property_set_int(OBJECT(&s->a9mpcore), "num-irq", NPCM7XX_NUM_IRQ,
+ &error_abort);
+ sysbus_realize(SYS_BUS_DEVICE(&s->a9mpcore), &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, NPCM7XX_CPUP_BA);
+
+ for (i = 0; i < nc->num_cpus; i++) {
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i,
+ qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i + nc->num_cpus,
+ qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ));
+ }
+
+ /* L2 cache controller */
+ sysbus_create_simple("l2x0", NPCM7XX_L2C_BA, NULL);
+
+ /* System Global Control Registers (GCR). Can fail due to user input. */
+ object_property_set_int(OBJECT(&s->gcr), "disabled-modules",
+ nc->disabled_modules, &error_abort);
+ object_property_add_const_link(OBJECT(&s->gcr), "dram-mr", OBJECT(s->dram));
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->gcr), errp)) {
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gcr), 0, NPCM7XX_GCR_BA);
+
+ /* Clock Control Registers (CLK). Cannot fail. */
+ sysbus_realize(SYS_BUS_DEVICE(&s->clk), &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->clk), 0, NPCM7XX_CLK_BA);
+
+ /* Timer Modules (TIM). Cannot fail. */
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
+ for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
+ SysBusDevice *sbd = SYS_BUS_DEVICE(&s->tim[i]);
+ int first_irq;
+ int j;
+
+ sysbus_realize(sbd, &error_abort);
+ sysbus_mmio_map(sbd, 0, npcm7xx_tim_addr[i]);
+
+ first_irq = NPCM7XX_TIMER0_IRQ + i * NPCM7XX_TIMERS_PER_CTRL;
+ for (j = 0; j < NPCM7XX_TIMERS_PER_CTRL; j++) {
+ qemu_irq irq = npcm7xx_irq(s, first_irq + j);
+ sysbus_connect_irq(sbd, j, irq);
+ }
+ }
+
+ /* UART0..3 (16550 compatible) */
+ for (i = 0; i < ARRAY_SIZE(npcm7xx_uart_addr); i++) {
+ serial_mm_init(get_system_memory(), npcm7xx_uart_addr[i], 2,
+ npcm7xx_irq(s, NPCM7XX_UART0_IRQ + i), 115200,
+ serial_hd(i), DEVICE_LITTLE_ENDIAN);
+ }
+
+ /* RAM2 (SRAM) */
+ memory_region_init_ram(&s->sram, OBJECT(dev), "ram2",
+ NPCM7XX_RAM2_SZ, &error_abort);
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_RAM2_BA, &s->sram);
+
+ /* RAM3 (SRAM) */
+ memory_region_init_ram(&s->ram3, OBJECT(dev), "ram3",
+ NPCM7XX_RAM3_SZ, &error_abort);
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_RAM3_BA, &s->ram3);
+
+ /* Internal ROM */
+ memory_region_init_rom(&s->irom, OBJECT(dev), "irom", NPCM7XX_ROM_SZ,
+ &error_abort);
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_ROM_BA, &s->irom);
+
+ create_unimplemented_device("npcm7xx.shm", 0xc0001000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.vdmx", 0xe0800000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.pcierc", 0xe1000000, 64 * KiB);
+ create_unimplemented_device("npcm7xx.kcs", 0xf0007000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.rng", 0xf000b000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.adc", 0xf000c000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gfxi", 0xf000e000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[0]", 0xf0010000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[1]", 0xf0011000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[2]", 0xf0012000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[3]", 0xf0013000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[4]", 0xf0014000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[5]", 0xf0015000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[6]", 0xf0016000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.gpio[7]", 0xf0017000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[0]", 0xf0080000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[1]", 0xf0081000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[2]", 0xf0082000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[3]", 0xf0083000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[4]", 0xf0084000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[5]", 0xf0085000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[6]", 0xf0086000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[7]", 0xf0087000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[8]", 0xf0088000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[9]", 0xf0089000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[10]", 0xf008a000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[11]", 0xf008b000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[12]", 0xf008c000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[13]", 0xf008d000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[14]", 0xf008e000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.smbus[15]", 0xf008f000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.espi", 0xf009f000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.peci", 0xf0100000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.siox[1]", 0xf0101000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.siox[2]", 0xf0102000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.pwm[0]", 0xf0103000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.pwm[1]", 0xf0104000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[0]", 0xf0180000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[1]", 0xf0181000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[2]", 0xf0182000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[3]", 0xf0183000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[4]", 0xf0184000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[5]", 0xf0185000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[6]", 0xf0186000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.mft[7]", 0xf0187000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.pspi1", 0xf0200000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.pspi2", 0xf0201000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.ahbpci", 0xf0400000, 1 * MiB);
+ create_unimplemented_device("npcm7xx.mcphy", 0xf05f0000, 64 * KiB);
+ create_unimplemented_device("npcm7xx.gmac1", 0xf0802000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.gmac2", 0xf0804000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.ehci", 0xf0806000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.ohci", 0xf0807000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.vcd", 0xf0810000, 64 * KiB);
+ create_unimplemented_device("npcm7xx.ece", 0xf0820000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.vdma", 0xf0822000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.emc1", 0xf0825000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.emc2", 0xf0826000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[0]", 0xf0830000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[1]", 0xf0831000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[2]", 0xf0832000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[3]", 0xf0833000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[4]", 0xf0834000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[5]", 0xf0835000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[6]", 0xf0836000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[7]", 0xf0837000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[8]", 0xf0838000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.usbd[9]", 0xf0839000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.sd", 0xf0840000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.mmc", 0xf0842000, 8 * KiB);
+ create_unimplemented_device("npcm7xx.pcimbx", 0xf0848000, 512 * KiB);
+ create_unimplemented_device("npcm7xx.aes", 0xf0858000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.des", 0xf0859000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.sha", 0xf085a000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.secacc", 0xf085b000, 4 * KiB);
+ create_unimplemented_device("npcm7xx.spixcs0", 0xf8000000, 16 * MiB);
+ create_unimplemented_device("npcm7xx.spixcs1", 0xf9000000, 16 * MiB);
+ create_unimplemented_device("npcm7xx.spix", 0xfb001000, 4 * KiB);
+}
+
+static Property npcm7xx_properties[] = {
+ DEFINE_PROP_LINK("dram-mr", NPCM7xxState, dram, TYPE_MEMORY_REGION,
+ MemoryRegion *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+
+ dc->realize = npcm7xx_realize;
+ dc->user_creatable = false;
+ device_class_set_props(dc, npcm7xx_properties);
+}
+
+static void npcm730_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
+
+ /* NPCM730 is optimized for data center use, so no graphics, etc. */
+ nc->disabled_modules = 0x00300395;
+ nc->num_cpus = 2;
+}
+
+static void npcm750_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxClass *nc = NPCM7XX_CLASS(oc);
+
+ /* NPCM750 has 2 cores and a full set of peripherals */
+ nc->disabled_modules = 0x00000000;
+ nc->num_cpus = 2;
+}
+
+static const TypeInfo npcm7xx_soc_types[] = {
+ {
+ .name = TYPE_NPCM7XX,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(NPCM7xxState),
+ .instance_init = npcm7xx_init,
+ .class_size = sizeof(NPCM7xxClass),
+ .class_init = npcm7xx_class_init,
+ .abstract = true,
+ }, {
+ .name = TYPE_NPCM730,
+ .parent = TYPE_NPCM7XX,
+ .class_init = npcm730_class_init,
+ }, {
+ .name = TYPE_NPCM750,
+ .parent = TYPE_NPCM7XX,
+ .class_init = npcm750_class_init,
+ },
+};
+
+DEFINE_TYPES(npcm7xx_soc_types);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 4aec9c63f87..cd74642034b 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -357,6 +357,11 @@ config XLNX_VERSAL
config NPCM7XX
bool
+ select A9MPCORE
+ select ARM_GIC
+ select PL310 # cache controller
+ select SERIAL
+ select UNIMP
config FSL_IMX25
bool
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index 8480b7f37d0..b0967c44c95 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -13,6 +13,7 @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c'))
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
+arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c'))
arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c'))
arm_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 23/36] hw/arm: Add two NPCM7xx-based machines
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (21 preceding siblings ...)
2020-09-14 14:06 ` [PULL 22/36] hw/arm: Add NPCM730 and NPCM750 SoC models Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 24/36] roms: Add virtual Boot ROM for NPCM7xx SoCs Peter Maydell
` (12 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This adds two new machines, both supported by OpenBMC:
- npcm750-evb: Nuvoton NPCM750 Evaluation Board.
- quanta-gsj: A board with a NPCM730 chip.
They rely on the NPCM7xx SoC device to do the heavy lifting. They are
almost completely identical at the moment, apart from the SoC type,
which currently only changes the reset contents of one register
(GCR.MDLR), but they might grow apart a bit more as more functionality
is added.
Both machines can boot the Linux kernel into /bin/sh.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-6-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
default-configs/arm-softmmu.mak | 1 +
include/hw/arm/npcm7xx.h | 19 +++++
hw/arm/npcm7xx_boards.c | 145 ++++++++++++++++++++++++++++++++
hw/arm/meson.build | 2 +-
4 files changed, 166 insertions(+), 1 deletion(-)
create mode 100644 hw/arm/npcm7xx_boards.c
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 8fc09a4a510..9a94ebd0bef 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -27,6 +27,7 @@ CONFIG_GUMSTIX=y
CONFIG_SPITZ=y
CONFIG_TOSA=y
CONFIG_Z2=y
+CONFIG_NPCM7XX=y
CONFIG_COLLIE=y
CONFIG_ASPEED_SOC=y
CONFIG_NETDUINO2=y
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index e68d9c79e65..ba7495869d0 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -35,6 +35,25 @@
#define NPCM7XX_SMP_BOOTREG_ADDR (0xf080013c) /* GCR.SCRPAD */
#define NPCM7XX_GIC_CPU_IF_ADDR (0xf03fe100) /* GIC within A9 */
+typedef struct NPCM7xxMachine {
+ MachineState parent;
+} NPCM7xxMachine;
+
+#define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx")
+#define NPCM7XX_MACHINE(obj) \
+ OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE)
+
+typedef struct NPCM7xxMachineClass {
+ MachineClass parent;
+
+ const char *soc_type;
+} NPCM7xxMachineClass;
+
+#define NPCM7XX_MACHINE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NPCM7xxMachineClass, (klass), TYPE_NPCM7XX_MACHINE)
+#define NPCM7XX_MACHINE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE)
+
typedef struct NPCM7xxState {
DeviceState parent;
diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
new file mode 100644
index 00000000000..939391c3a3c
--- /dev/null
+++ b/hw/arm/npcm7xx_boards.c
@@ -0,0 +1,145 @@
+/*
+ * Machine definitions for boards featuring an NPCM7xx SoC.
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "exec/address-spaces.h"
+#include "hw/arm/npcm7xx.h"
+#include "hw/core/cpu.h"
+#include "qapi/error.h"
+#include "qemu/units.h"
+
+#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7
+#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff
+
+static void npcm7xx_connect_dram(NPCM7xxState *soc, MemoryRegion *dram)
+{
+ memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, dram);
+
+ object_property_set_link(OBJECT(soc), "dram-mr", OBJECT(dram),
+ &error_abort);
+}
+
+static NPCM7xxState *npcm7xx_create_soc(MachineState *machine,
+ uint32_t hw_straps)
+{
+ NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_GET_CLASS(machine);
+ MachineClass *mc = &nmc->parent;
+ Object *obj;
+
+ if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
+ error_report("This board can only be used with %s",
+ mc->default_cpu_type);
+ exit(1);
+ }
+
+ obj = object_new_with_props(nmc->soc_type, OBJECT(machine), "soc",
+ &error_abort, NULL);
+ object_property_set_uint(obj, "power-on-straps", hw_straps, &error_abort);
+
+ return NPCM7XX(obj);
+}
+
+static void npcm750_evb_init(MachineState *machine)
+{
+ NPCM7xxState *soc;
+
+ soc = npcm7xx_create_soc(machine, NPCM750_EVB_POWER_ON_STRAPS);
+ npcm7xx_connect_dram(soc, machine->ram);
+ qdev_realize(DEVICE(soc), NULL, &error_fatal);
+
+ npcm7xx_load_kernel(machine, soc);
+}
+
+static void quanta_gsj_init(MachineState *machine)
+{
+ NPCM7xxState *soc;
+
+ soc = npcm7xx_create_soc(machine, QUANTA_GSJ_POWER_ON_STRAPS);
+ npcm7xx_connect_dram(soc, machine->ram);
+ qdev_realize(DEVICE(soc), NULL, &error_fatal);
+
+ npcm7xx_load_kernel(machine, soc);
+}
+
+static void npcm7xx_set_soc_type(NPCM7xxMachineClass *nmc, const char *type)
+{
+ NPCM7xxClass *sc = NPCM7XX_CLASS(object_class_by_name(type));
+ MachineClass *mc = MACHINE_CLASS(nmc);
+
+ nmc->soc_type = type;
+ mc->default_cpus = mc->min_cpus = mc->max_cpus = sc->num_cpus;
+}
+
+static void npcm7xx_machine_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ mc->no_floppy = 1;
+ mc->no_cdrom = 1;
+ mc->no_parallel = 1;
+ mc->default_ram_id = "ram";
+ mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
+}
+
+/*
+ * Schematics:
+ * https://github.com/Nuvoton-Israel/nuvoton-info/blob/master/npcm7xx-poleg/evaluation-board/board_deliverables/NPCM750x_EB_ver.A1.1_COMPLETE.pdf
+ */
+static void npcm750_evb_machine_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_CLASS(oc);
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ npcm7xx_set_soc_type(nmc, TYPE_NPCM750);
+
+ mc->desc = "Nuvoton NPCM750 Evaluation Board (Cortex A9)";
+ mc->init = npcm750_evb_init;
+ mc->default_ram_size = 512 * MiB;
+};
+
+static void gsj_machine_class_init(ObjectClass *oc, void *data)
+{
+ NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_CLASS(oc);
+ MachineClass *mc = MACHINE_CLASS(oc);
+
+ npcm7xx_set_soc_type(nmc, TYPE_NPCM730);
+
+ mc->desc = "Quanta GSJ (Cortex A9)";
+ mc->init = quanta_gsj_init;
+ mc->default_ram_size = 512 * MiB;
+};
+
+static const TypeInfo npcm7xx_machine_types[] = {
+ {
+ .name = TYPE_NPCM7XX_MACHINE,
+ .parent = TYPE_MACHINE,
+ .instance_size = sizeof(NPCM7xxMachine),
+ .class_size = sizeof(NPCM7xxMachineClass),
+ .class_init = npcm7xx_machine_class_init,
+ .abstract = true,
+ }, {
+ .name = MACHINE_TYPE_NAME("npcm750-evb"),
+ .parent = TYPE_NPCM7XX_MACHINE,
+ .class_init = npcm750_evb_machine_class_init,
+ }, {
+ .name = MACHINE_TYPE_NAME("quanta-gsj"),
+ .parent = TYPE_NPCM7XX_MACHINE,
+ .class_init = gsj_machine_class_init,
+ },
+};
+
+DEFINE_TYPES(npcm7xx_machine_types)
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index b0967c44c95..be39117b9b6 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -13,7 +13,7 @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c'))
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
-arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c'))
+arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c'))
arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c'))
arm_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 24/36] roms: Add virtual Boot ROM for NPCM7xx SoCs
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (22 preceding siblings ...)
2020-09-14 14:06 ` [PULL 23/36] hw/arm: Add two NPCM7xx-based machines Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 25/36] hw/arm: Load -bios image as a boot ROM for npcm7xx Peter Maydell
` (11 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
.gitmodules | 3 +++
MAINTAINERS | 2 ++
pc-bios/README | 6 ++++++
pc-bios/meson.build | 1 +
pc-bios/npcm7xx_bootrom.bin | Bin 0 -> 768 bytes
roms/Makefile | 7 +++++++
roms/vbootrom | 1 +
7 files changed, 20 insertions(+)
create mode 100644 pc-bios/npcm7xx_bootrom.bin
create mode 160000 roms/vbootrom
diff --git a/.gitmodules b/.gitmodules
index ce979398a87..9ffb9f3f4f3 100644
--- a/.gitmodules
+++ b/.gitmodules
@@ -61,3 +61,6 @@
[submodule "meson"]
path = meson
url = https://github.com/mesonbuild/meson/
+[submodule "roms/vbootrom"]
+ path = roms/vbootrom
+ url = https://github.com/google/vbootrom.git
diff --git a/MAINTAINERS b/MAINTAINERS
index c95a00c12dd..3d17cad19aa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -757,6 +757,8 @@ L: qemu-arm@nongnu.org
S: Supported
F: hw/*/npcm7xx*
F: include/hw/*/npcm7xx*
+F: pc-bios/npcm7xx_bootrom.bin
+F: roms/vbootrom
nSeries
M: Andrzej Zaborowski <balrogg@gmail.com>
diff --git a/pc-bios/README b/pc-bios/README
index 2e49be607e0..33f9754ad30 100644
--- a/pc-bios/README
+++ b/pc-bios/README
@@ -71,3 +71,9 @@
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.
+
+- npcm7xx_bootrom.bin is a simplified, free (Apache 2.0) boot ROM for Nuvoton
+ NPCM7xx BMC devices. It currently implements the bare minimum to load, parse,
+ initialize and run boot images stored in SPI flash, but may grow more
+ features over time as needed. The source code is available at:
+ https://github.com/google/vbootrom
diff --git a/pc-bios/meson.build b/pc-bios/meson.build
index 8087e5c0a7a..182d5ebb35d 100644
--- a/pc-bios/meson.build
+++ b/pc-bios/meson.build
@@ -81,6 +81,7 @@ blobs = files(
'opensbi-riscv64-generic-fw_dynamic.bin',
'opensbi-riscv32-generic-fw_dynamic.elf',
'opensbi-riscv64-generic-fw_dynamic.elf',
+ 'npcm7xx_bootrom.bin',
)
if install_blobs
diff --git a/pc-bios/npcm7xx_bootrom.bin b/pc-bios/npcm7xx_bootrom.bin
new file mode 100644
index 0000000000000000000000000000000000000000..38f89d1b97b0c2e133af2a9fbed0521be132065b
GIT binary patch
literal 768
zcmd5)JxClu6n-<aczPbVhZYusb8wKx;7TklHfmuZdYT9pDRLwd1p_t-DFpWpyA+8(
zwKtZg3J4a0aCM3_X(ZL&4g;46VVk5e$K;z;L99|b@aE%v^S$rQ8)h(Vm@cB9IYc+2
z2SHd4^NwTIGE%w>9S05p1#kf90Sj5Z(jG8}+)IZIp~iXK=T&)dL`%d-q*8aR#mq{7
z9`=6;Dr(H0ACe72R5x?!)^86Qj-X%{+!K9iZNA@*wkBAV&iZ(l^I9?!Gz=S2I_*1d
zr+tTQDHjvyzKnw(hu00yX`u!Fv<!~XVcX?@kr#<B0(gGU?$W{gSsQa}CF^8Cfzp2X
z@P}yDV-bci(K9XL$FU!som2C`c)?Uc&294s^}Wzumap{hg1X^jN|V25M5tQZ=<9lN
z%(zKz#t-qCwHKb;HygOCpvCNL_4@1tXV1YGf^XUE_$zr{g8zWh-6gz-teI(eibtxo
z?0OZI4%rU0741PgUD`2xq@H|*4=+Rs?%N)Ox5G+q>C;DilBe_YlkeSUVHA-crNk+k
jtiF_MudA<CB(}8|fqYwCf3re&=&@_s761P#-ID$TwgmBa
literal 0
HcmV?d00001
diff --git a/roms/Makefile b/roms/Makefile
index d3a32283591..3726f06fe7e 100644
--- a/roms/Makefile
+++ b/roms/Makefile
@@ -34,6 +34,7 @@ find-cross-gcc = $(firstword $(wildcard $(patsubst %ld,%gcc,$(call find-cross-ld
# finally strip off path + toolname so we get the prefix
find-cross-prefix = $(subst gcc,,$(notdir $(call find-cross-gcc,$(1))))
+arm_cross_prefix := $(call find-cross-prefix,arm)
powerpc64_cross_prefix := $(call find-cross-prefix,powerpc64)
powerpc_cross_prefix := $(call find-cross-prefix,powerpc)
x86_64_cross_prefix := $(call find-cross-prefix,x86_64)
@@ -63,6 +64,7 @@ default help:
@echo " skiboot -- update skiboot.lid"
@echo " u-boot.e500 -- update u-boot.e500"
@echo " u-boot.sam460 -- update u-boot.sam460"
+ @echo " npcm7xx_bootrom -- update vbootrom for npcm7xx"
@echo " efi -- update UEFI (edk2) platform firmware"
@echo " opensbi32-generic -- update OpenSBI for 32-bit generic machine"
@echo " opensbi64-generic -- update OpenSBI for 64-bit generic machine"
@@ -185,6 +187,10 @@ bios-microvm:
$(MAKE) -C qboot
cp qboot/bios.bin ../pc-bios/bios-microvm.bin
+npcm7xx_bootrom:
+ $(MAKE) -C vbootrom CROSS_COMPILE=$(arm_cross_prefix)
+ cp vbootrom/npcm7xx_bootrom.bin ../pc-bios/npcm7xx_bootrom.bin
+
clean:
rm -rf seabios/.config seabios/out seabios/builds
$(MAKE) -C sgabios clean
@@ -198,3 +204,4 @@ clean:
$(MAKE) -f Makefile.edk2 clean
$(MAKE) -C opensbi clean
$(MAKE) -C qboot clean
+ $(MAKE) -C vbootrom clean
diff --git a/roms/vbootrom b/roms/vbootrom
new file mode 160000
index 00000000000..0c37a43527f
--- /dev/null
+++ b/roms/vbootrom
@@ -0,0 +1 @@
+Subproject commit 0c37a43527f0ee2b9584e7fb2fdc805e902635ac
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 25/36] hw/arm: Load -bios image as a boot ROM for npcm7xx
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (23 preceding siblings ...)
2020-09-14 14:06 ` [PULL 24/36] roms: Add virtual Boot ROM for NPCM7xx SoCs Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 26/36] hw/nvram: NPCM7xx OTP device model Peter Maydell
` (10 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
If a -bios option is specified on the command line, load the image into
the internal ROM memory region, which contains the first instructions
run by the CPU after reset.
If -bios is not specified, the vbootrom included with qemu is loaded by
default.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-8-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/npcm7xx_boards.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index 939391c3a3c..b4c772d6b52 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -19,12 +19,42 @@
#include "exec/address-spaces.h"
#include "hw/arm/npcm7xx.h"
#include "hw/core/cpu.h"
+#include "hw/loader.h"
#include "qapi/error.h"
+#include "qemu-common.h"
#include "qemu/units.h"
+#include "sysemu/sysemu.h"
#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7
#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff
+static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin";
+
+static void npcm7xx_load_bootrom(MachineState *machine, NPCM7xxState *soc)
+{
+ g_autofree char *filename = NULL;
+ int ret;
+
+ if (!bios_name) {
+ bios_name = npcm7xx_default_bootrom;
+ }
+
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (!filename) {
+ error_report("Could not find ROM image '%s'", bios_name);
+ if (!machine->kernel_filename) {
+ /* We can't boot without a bootrom or a kernel image. */
+ exit(1);
+ }
+ return;
+ }
+ ret = load_image_mr(filename, &soc->irom);
+ if (ret < 0) {
+ error_report("Failed to load ROM image '%s'", filename);
+ exit(1);
+ }
+}
+
static void npcm7xx_connect_dram(NPCM7xxState *soc, MemoryRegion *dram)
{
memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, dram);
@@ -61,6 +91,7 @@ static void npcm750_evb_init(MachineState *machine)
npcm7xx_connect_dram(soc, machine->ram);
qdev_realize(DEVICE(soc), NULL, &error_fatal);
+ npcm7xx_load_bootrom(machine, soc);
npcm7xx_load_kernel(machine, soc);
}
@@ -72,6 +103,7 @@ static void quanta_gsj_init(MachineState *machine)
npcm7xx_connect_dram(soc, machine->ram);
qdev_realize(DEVICE(soc), NULL, &error_fatal);
+ npcm7xx_load_bootrom(machine, soc);
npcm7xx_load_kernel(machine, soc);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 26/36] hw/nvram: NPCM7xx OTP device model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (24 preceding siblings ...)
2020-09-14 14:06 ` [PULL 25/36] hw/arm: Load -bios image as a boot ROM for npcm7xx Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 27/36] hw/mem: Stubbed out NPCM7xx Memory Controller model Peter Maydell
` (9 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This supports reading and writing OTP fuses and keys. Only fuse reading
has been tested. Protection is not implemented.
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-9-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/npcm7xx.h | 3 +
include/hw/nvram/npcm7xx_otp.h | 79 ++++++
hw/arm/npcm7xx.c | 29 +++
hw/nvram/npcm7xx_otp.c | 440 +++++++++++++++++++++++++++++++++
hw/nvram/meson.build | 1 +
5 files changed, 552 insertions(+)
create mode 100644 include/hw/nvram/npcm7xx_otp.h
create mode 100644 hw/nvram/npcm7xx_otp.c
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index ba7495869d0..5816a07a72e 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -20,6 +20,7 @@
#include "hw/cpu/a9mpcore.h"
#include "hw/misc/npcm7xx_clk.h"
#include "hw/misc/npcm7xx_gcr.h"
+#include "hw/nvram/npcm7xx_otp.h"
#include "hw/timer/npcm7xx_timer.h"
#include "target/arm/cpu.h"
@@ -68,6 +69,8 @@ typedef struct NPCM7xxState {
NPCM7xxGCRState gcr;
NPCM7xxCLKState clk;
NPCM7xxTimerCtrlState tim[3];
+ NPCM7xxOTPState key_storage;
+ NPCM7xxOTPState fuse_array;
} NPCM7xxState;
#define TYPE_NPCM7XX "npcm7xx"
diff --git a/include/hw/nvram/npcm7xx_otp.h b/include/hw/nvram/npcm7xx_otp.h
new file mode 100644
index 00000000000..156bbd151ab
--- /dev/null
+++ b/include/hw/nvram/npcm7xx_otp.h
@@ -0,0 +1,79 @@
+/*
+ * Nuvoton NPCM7xx OTP (Fuse Array) Interface
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_OTP_H
+#define NPCM7XX_OTP_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+
+/* Each OTP module holds 8192 bits of one-time programmable storage */
+#define NPCM7XX_OTP_ARRAY_BITS (8192)
+#define NPCM7XX_OTP_ARRAY_BYTES (NPCM7XX_OTP_ARRAY_BITS / BITS_PER_BYTE)
+
+/* Fuse array offsets */
+#define NPCM7XX_FUSE_FUSTRAP (0)
+#define NPCM7XX_FUSE_CP_FUSTRAP (12)
+#define NPCM7XX_FUSE_DAC_CALIB (16)
+#define NPCM7XX_FUSE_ADC_CALIB (24)
+#define NPCM7XX_FUSE_DERIVATIVE (64)
+#define NPCM7XX_FUSE_TEST_SIG (72)
+#define NPCM7XX_FUSE_DIE_LOCATION (74)
+#define NPCM7XX_FUSE_GP1 (80)
+#define NPCM7XX_FUSE_GP2 (128)
+
+/*
+ * Number of registers in our device state structure. Don't change this without
+ * incrementing the version_id in the vmstate.
+ */
+#define NPCM7XX_OTP_NR_REGS (0x18 / sizeof(uint32_t))
+
+/**
+ * struct NPCM7xxOTPState - Device state for one OTP module.
+ * @parent: System bus device.
+ * @mmio: Memory region through which registers are accessed.
+ * @regs: Register contents.
+ * @array: OTP storage array.
+ */
+typedef struct NPCM7xxOTPState {
+ SysBusDevice parent;
+
+ MemoryRegion mmio;
+ uint32_t regs[NPCM7XX_OTP_NR_REGS];
+ uint8_t array[NPCM7XX_OTP_ARRAY_BYTES];
+} NPCM7xxOTPState;
+
+#define TYPE_NPCM7XX_OTP "npcm7xx-otp"
+#define NPCM7XX_OTP(obj) OBJECT_CHECK(NPCM7xxOTPState, (obj), TYPE_NPCM7XX_OTP)
+
+#define TYPE_NPCM7XX_KEY_STORAGE "npcm7xx-key-storage"
+#define TYPE_NPCM7XX_FUSE_ARRAY "npcm7xx-fuse-array"
+
+typedef struct NPCM7xxOTPClass NPCM7xxOTPClass;
+
+/**
+ * npcm7xx_otp_array_write - ECC encode and write data to OTP array.
+ * @s: OTP module.
+ * @data: Data to be encoded and written.
+ * @offset: Offset of first byte to be written in the OTP array.
+ * @len: Number of bytes before ECC encoding.
+ *
+ * Each nibble of data is encoded into a byte, so the number of bytes written
+ * to the array will be @len * 2.
+ */
+extern void npcm7xx_otp_array_write(NPCM7xxOTPState *s, const void *data,
+ unsigned int offset, unsigned int len);
+
+#endif /* NPCM7XX_OTP_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 9669ac5fa03..91660025984 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -34,6 +34,10 @@
#define NPCM7XX_MMIO_BA (0x80000000)
#define NPCM7XX_MMIO_SZ (0x7ffd0000)
+/* OTP key storage and fuse strap array */
+#define NPCM7XX_OTP1_BA (0xf0189000)
+#define NPCM7XX_OTP2_BA (0xf018a000)
+
/* Core system modules. */
#define NPCM7XX_L2C_BA (0xf03fc000)
#define NPCM7XX_CPUP_BA (0xf03fe000)
@@ -144,6 +148,20 @@ void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc)
arm_load_kernel(&soc->cpu[0], machine, &npcm7xx_binfo);
}
+static void npcm7xx_init_fuses(NPCM7xxState *s)
+{
+ NPCM7xxClass *nc = NPCM7XX_GET_CLASS(s);
+ uint32_t value;
+
+ /*
+ * The initial mask of disabled modules indicates the chip derivative (e.g.
+ * NPCM750 or NPCM730).
+ */
+ value = tswap32(nc->disabled_modules);
+ npcm7xx_otp_array_write(&s->fuse_array, &value, NPCM7XX_FUSE_DERIVATIVE,
+ sizeof(value));
+}
+
static qemu_irq npcm7xx_irq(NPCM7xxState *s, int n)
{
return qdev_get_gpio_in(DEVICE(&s->a9mpcore), n);
@@ -164,6 +182,10 @@ static void npcm7xx_init(Object *obj)
object_property_add_alias(obj, "power-on-straps", OBJECT(&s->gcr),
"power-on-straps");
object_initialize_child(obj, "clk", &s->clk, TYPE_NPCM7XX_CLK);
+ object_initialize_child(obj, "otp1", &s->key_storage,
+ TYPE_NPCM7XX_KEY_STORAGE);
+ object_initialize_child(obj, "otp2", &s->fuse_array,
+ TYPE_NPCM7XX_FUSE_ARRAY);
for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
@@ -232,6 +254,13 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
sysbus_realize(SYS_BUS_DEVICE(&s->clk), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->clk), 0, NPCM7XX_CLK_BA);
+ /* OTP key storage and fuse strap array. Cannot fail. */
+ sysbus_realize(SYS_BUS_DEVICE(&s->key_storage), &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->key_storage), 0, NPCM7XX_OTP1_BA);
+ sysbus_realize(SYS_BUS_DEVICE(&s->fuse_array), &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->fuse_array), 0, NPCM7XX_OTP2_BA);
+ npcm7xx_init_fuses(s);
+
/* Timer Modules (TIM). Cannot fail. */
QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
diff --git a/hw/nvram/npcm7xx_otp.c b/hw/nvram/npcm7xx_otp.c
new file mode 100644
index 00000000000..b16ca530baa
--- /dev/null
+++ b/hw/nvram/npcm7xx_otp.c
@@ -0,0 +1,440 @@
+/*
+ * Nuvoton NPCM7xx OTP (Fuse Array) Interface
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/nvram/npcm7xx_otp.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+
+/* Each module has 4 KiB of register space. Only a fraction of it is used. */
+#define NPCM7XX_OTP_REGS_SIZE (4 * KiB)
+
+/* 32-bit register indices. */
+typedef enum NPCM7xxOTPRegister {
+ NPCM7XX_OTP_FST,
+ NPCM7XX_OTP_FADDR,
+ NPCM7XX_OTP_FDATA,
+ NPCM7XX_OTP_FCFG,
+ /* Offset 0x10 is FKEYIND in OTP1, FUSTRAP in OTP2 */
+ NPCM7XX_OTP_FKEYIND = 0x0010 / sizeof(uint32_t),
+ NPCM7XX_OTP_FUSTRAP = 0x0010 / sizeof(uint32_t),
+ NPCM7XX_OTP_FCTL,
+ NPCM7XX_OTP_REGS_END,
+} NPCM7xxOTPRegister;
+
+/* Register field definitions. */
+#define FST_RIEN BIT(2)
+#define FST_RDST BIT(1)
+#define FST_RDY BIT(0)
+#define FST_RO_MASK (FST_RDST | FST_RDY)
+
+#define FADDR_BYTEADDR(rv) extract32((rv), 0, 10)
+#define FADDR_BITPOS(rv) extract32((rv), 10, 3)
+
+#define FDATA_CLEAR 0x00000001
+
+#define FCFG_FDIS BIT(31)
+#define FCFG_FCFGLK_MASK 0x00ff0000
+
+#define FCTL_PROG_CMD1 0x00000001
+#define FCTL_PROG_CMD2 0xbf79e5d0
+#define FCTL_READ_CMD 0x00000002
+
+/**
+ * struct NPCM7xxOTPClass - OTP module class.
+ * @parent: System bus device class.
+ * @mmio_ops: MMIO register operations for this type of module.
+ *
+ * The two OTP modules (key-storage and fuse-array) have slightly different
+ * behavior, so we give them different MMIO register operations.
+ */
+struct NPCM7xxOTPClass {
+ SysBusDeviceClass parent;
+
+ const MemoryRegionOps *mmio_ops;
+};
+
+#define NPCM7XX_OTP_CLASS(klass) \
+ OBJECT_CLASS_CHECK(NPCM7xxOTPClass, (klass), TYPE_NPCM7XX_OTP)
+#define NPCM7XX_OTP_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(NPCM7xxOTPClass, (obj), TYPE_NPCM7XX_OTP)
+
+static uint8_t ecc_encode_nibble(uint8_t n)
+{
+ uint8_t result = n;
+
+ result |= (((n >> 0) & 1) ^ ((n >> 1) & 1)) << 4;
+ result |= (((n >> 2) & 1) ^ ((n >> 3) & 1)) << 5;
+ result |= (((n >> 0) & 1) ^ ((n >> 2) & 1)) << 6;
+ result |= (((n >> 1) & 1) ^ ((n >> 3) & 1)) << 7;
+
+ return result;
+}
+
+void npcm7xx_otp_array_write(NPCM7xxOTPState *s, const void *data,
+ unsigned int offset, unsigned int len)
+{
+ const uint8_t *src = data;
+ uint8_t *dst = &s->array[offset];
+
+ while (len-- > 0) {
+ uint8_t c = *src++;
+
+ *dst++ = ecc_encode_nibble(extract8(c, 0, 4));
+ *dst++ = ecc_encode_nibble(extract8(c, 4, 4));
+ }
+}
+
+/* Common register read handler for both OTP classes. */
+static uint64_t npcm7xx_otp_read(NPCM7xxOTPState *s, NPCM7xxOTPRegister reg)
+{
+ uint32_t value = 0;
+
+ switch (reg) {
+ case NPCM7XX_OTP_FST:
+ case NPCM7XX_OTP_FADDR:
+ case NPCM7XX_OTP_FDATA:
+ case NPCM7XX_OTP_FCFG:
+ value = s->regs[reg];
+ break;
+
+ case NPCM7XX_OTP_FCTL:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: read from write-only FCTL register\n",
+ DEVICE(s)->canonical_path);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: read from invalid offset 0x%zx\n",
+ DEVICE(s)->canonical_path, reg * sizeof(uint32_t));
+ break;
+ }
+
+ return value;
+}
+
+/* Read a byte from the OTP array into the data register. */
+static void npcm7xx_otp_read_array(NPCM7xxOTPState *s)
+{
+ uint32_t faddr = s->regs[NPCM7XX_OTP_FADDR];
+
+ s->regs[NPCM7XX_OTP_FDATA] = s->array[FADDR_BYTEADDR(faddr)];
+ s->regs[NPCM7XX_OTP_FST] |= FST_RDST | FST_RDY;
+}
+
+/* Program a byte from the data register into the OTP array. */
+static void npcm7xx_otp_program_array(NPCM7xxOTPState *s)
+{
+ uint32_t faddr = s->regs[NPCM7XX_OTP_FADDR];
+
+ /* Bits can only go 0->1, never 1->0. */
+ s->array[FADDR_BYTEADDR(faddr)] |= (1U << FADDR_BITPOS(faddr));
+ s->regs[NPCM7XX_OTP_FST] |= FST_RDST | FST_RDY;
+}
+
+/* Compute the next value of the FCFG register. */
+static uint32_t npcm7xx_otp_compute_fcfg(uint32_t cur_value, uint32_t new_value)
+{
+ uint32_t lock_mask;
+ uint32_t value;
+
+ /*
+ * FCFGLK holds sticky bits 16..23, indicating which bits in FPRGLK (8..15)
+ * and FRDLK (0..7) that are read-only.
+ */
+ lock_mask = (cur_value & FCFG_FCFGLK_MASK) >> 8;
+ lock_mask |= lock_mask >> 8;
+ /* FDIS and FCFGLK bits are sticky (write 1 to set; can't clear). */
+ value = cur_value & (FCFG_FDIS | FCFG_FCFGLK_MASK);
+ /* Preserve read-only bits in FPRGLK and FRDLK */
+ value |= cur_value & lock_mask;
+ /* Set all bits that aren't read-only. */
+ value |= new_value & ~lock_mask;
+
+ return value;
+}
+
+/* Common register write handler for both OTP classes. */
+static void npcm7xx_otp_write(NPCM7xxOTPState *s, NPCM7xxOTPRegister reg,
+ uint32_t value)
+{
+ switch (reg) {
+ case NPCM7XX_OTP_FST:
+ /* RDST is cleared by writing 1 to it. */
+ if (value & FST_RDST) {
+ s->regs[NPCM7XX_OTP_FST] &= ~FST_RDST;
+ }
+ /* Preserve read-only and write-one-to-clear bits */
+ value &= ~FST_RO_MASK;
+ value |= s->regs[NPCM7XX_OTP_FST] & FST_RO_MASK;
+ break;
+
+ case NPCM7XX_OTP_FADDR:
+ break;
+
+ case NPCM7XX_OTP_FDATA:
+ /*
+ * This register is cleared by writing a magic value to it; no other
+ * values can be written.
+ */
+ if (value == FDATA_CLEAR) {
+ value = 0;
+ } else {
+ value = s->regs[NPCM7XX_OTP_FDATA];
+ }
+ break;
+
+ case NPCM7XX_OTP_FCFG:
+ value = npcm7xx_otp_compute_fcfg(s->regs[NPCM7XX_OTP_FCFG], value);
+ break;
+
+ case NPCM7XX_OTP_FCTL:
+ switch (value) {
+ case FCTL_READ_CMD:
+ npcm7xx_otp_read_array(s);
+ break;
+
+ case FCTL_PROG_CMD1:
+ /*
+ * Programming requires writing two separate magic values to this
+ * register; this is the first one. Just store it so it can be
+ * verified later when the second magic value is received.
+ */
+ break;
+
+ case FCTL_PROG_CMD2:
+ /*
+ * Only initiate programming if we received the first half of the
+ * command immediately before this one.
+ */
+ if (s->regs[NPCM7XX_OTP_FCTL] == FCTL_PROG_CMD1) {
+ npcm7xx_otp_program_array(s);
+ }
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: unrecognized FCNTL value 0x%" PRIx32 "\n",
+ DEVICE(s)->canonical_path, value);
+ break;
+ }
+ if (value != FCTL_PROG_CMD1) {
+ value = 0;
+ }
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: write to invalid offset 0x%zx\n",
+ DEVICE(s)->canonical_path, reg * sizeof(uint32_t));
+ return;
+ }
+
+ s->regs[reg] = value;
+}
+
+/* Register read handler specific to the fuse array OTP module. */
+static uint64_t npcm7xx_fuse_array_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ NPCM7xxOTPRegister reg = addr / sizeof(uint32_t);
+ NPCM7xxOTPState *s = opaque;
+ uint32_t value;
+
+ /*
+ * Only the Fuse Strap register needs special handling; all other registers
+ * work the same way for both kinds of OTP modules.
+ */
+ if (reg != NPCM7XX_OTP_FUSTRAP) {
+ value = npcm7xx_otp_read(s, reg);
+ } else {
+ /* FUSTRAP is stored as three copies in the OTP array. */
+ uint32_t fustrap[3];
+
+ memcpy(fustrap, &s->array[0], sizeof(fustrap));
+
+ /* Determine value by a majority vote on each bit. */
+ value = (fustrap[0] & fustrap[1]) | (fustrap[0] & fustrap[2]) |
+ (fustrap[1] & fustrap[2]);
+ }
+
+ return value;
+}
+
+/* Register write handler specific to the fuse array OTP module. */
+static void npcm7xx_fuse_array_write(void *opaque, hwaddr addr, uint64_t v,
+ unsigned int size)
+{
+ NPCM7xxOTPRegister reg = addr / sizeof(uint32_t);
+ NPCM7xxOTPState *s = opaque;
+
+ /*
+ * The Fuse Strap register is read-only. Other registers are handled by
+ * common code.
+ */
+ if (reg != NPCM7XX_OTP_FUSTRAP) {
+ npcm7xx_otp_write(s, reg, v);
+ }
+}
+
+static const MemoryRegionOps npcm7xx_fuse_array_ops = {
+ .read = npcm7xx_fuse_array_read,
+ .write = npcm7xx_fuse_array_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+/* Register read handler specific to the key storage OTP module. */
+static uint64_t npcm7xx_key_storage_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ NPCM7xxOTPRegister reg = addr / sizeof(uint32_t);
+ NPCM7xxOTPState *s = opaque;
+
+ /*
+ * Only the Fuse Key Index register needs special handling; all other
+ * registers work the same way for both kinds of OTP modules.
+ */
+ if (reg != NPCM7XX_OTP_FKEYIND) {
+ return npcm7xx_otp_read(s, reg);
+ }
+
+ qemu_log_mask(LOG_UNIMP, "%s: FKEYIND is not implemented\n", __func__);
+
+ return s->regs[NPCM7XX_OTP_FKEYIND];
+}
+
+/* Register write handler specific to the key storage OTP module. */
+static void npcm7xx_key_storage_write(void *opaque, hwaddr addr, uint64_t v,
+ unsigned int size)
+{
+ NPCM7xxOTPRegister reg = addr / sizeof(uint32_t);
+ NPCM7xxOTPState *s = opaque;
+
+ /*
+ * Only the Fuse Key Index register needs special handling; all other
+ * registers work the same way for both kinds of OTP modules.
+ */
+ if (reg != NPCM7XX_OTP_FKEYIND) {
+ npcm7xx_otp_write(s, reg, v);
+ return;
+ }
+
+ qemu_log_mask(LOG_UNIMP, "%s: FKEYIND is not implemented\n", __func__);
+
+ s->regs[NPCM7XX_OTP_FKEYIND] = v;
+}
+
+static const MemoryRegionOps npcm7xx_key_storage_ops = {
+ .read = npcm7xx_key_storage_read,
+ .write = npcm7xx_key_storage_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void npcm7xx_otp_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxOTPState *s = NPCM7XX_OTP(obj);
+
+ memset(s->regs, 0, sizeof(s->regs));
+
+ s->regs[NPCM7XX_OTP_FST] = 0x00000001;
+ s->regs[NPCM7XX_OTP_FCFG] = 0x20000000;
+}
+
+static void npcm7xx_otp_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev);
+ NPCM7xxOTPState *s = NPCM7XX_OTP(dev);
+ SysBusDevice *sbd = &s->parent;
+
+ memset(s->array, 0, sizeof(s->array));
+
+ memory_region_init_io(&s->mmio, OBJECT(s), oc->mmio_ops, s, "regs",
+ NPCM7XX_OTP_REGS_SIZE);
+ sysbus_init_mmio(sbd, &s->mmio);
+}
+
+static const VMStateDescription vmstate_npcm7xx_otp = {
+ .name = "npcm7xx-otp",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(regs, NPCM7xxOTPState, NPCM7XX_OTP_NR_REGS),
+ VMSTATE_UINT8_ARRAY(array, NPCM7xxOTPState, NPCM7XX_OTP_ARRAY_BYTES),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static void npcm7xx_otp_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ QEMU_BUILD_BUG_ON(NPCM7XX_OTP_REGS_END > NPCM7XX_OTP_NR_REGS);
+
+ dc->realize = npcm7xx_otp_realize;
+ dc->vmsd = &vmstate_npcm7xx_otp;
+ rc->phases.enter = npcm7xx_otp_enter_reset;
+}
+
+static void npcm7xx_key_storage_class_init(ObjectClass *klass, void *data)
+{
+ NPCM7xxOTPClass *oc = NPCM7XX_OTP_CLASS(klass);
+
+ oc->mmio_ops = &npcm7xx_key_storage_ops;
+}
+
+static void npcm7xx_fuse_array_class_init(ObjectClass *klass, void *data)
+{
+ NPCM7xxOTPClass *oc = NPCM7XX_OTP_CLASS(klass);
+
+ oc->mmio_ops = &npcm7xx_fuse_array_ops;
+}
+
+static const TypeInfo npcm7xx_otp_types[] = {
+ {
+ .name = TYPE_NPCM7XX_OTP,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxOTPState),
+ .class_size = sizeof(NPCM7xxOTPClass),
+ .class_init = npcm7xx_otp_class_init,
+ .abstract = true,
+ },
+ {
+ .name = TYPE_NPCM7XX_KEY_STORAGE,
+ .parent = TYPE_NPCM7XX_OTP,
+ .class_init = npcm7xx_key_storage_class_init,
+ },
+ {
+ .name = TYPE_NPCM7XX_FUSE_ARRAY,
+ .parent = TYPE_NPCM7XX_OTP,
+ .class_init = npcm7xx_fuse_array_class_init,
+ },
+};
+DEFINE_TYPES(npcm7xx_otp_types);
diff --git a/hw/nvram/meson.build b/hw/nvram/meson.build
index ba214558ac6..1f2ed013b26 100644
--- a/hw/nvram/meson.build
+++ b/hw/nvram/meson.build
@@ -4,6 +4,7 @@ softmmu_ss.add(when: 'CONFIG_DS1225Y', if_true: files('ds1225y.c'))
softmmu_ss.add(when: 'CONFIG_NMC93XX_EEPROM', if_true: files('eeprom93xx.c'))
softmmu_ss.add(when: 'CONFIG_AT24C', if_true: files('eeprom_at24c.c'))
softmmu_ss.add(when: 'CONFIG_MAC_NVRAM', if_true: files('mac_nvram.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_otp.c'))
softmmu_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_nvm.c'))
specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_nvram.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 27/36] hw/mem: Stubbed out NPCM7xx Memory Controller model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (25 preceding siblings ...)
2020-09-14 14:06 ` [PULL 26/36] hw/nvram: NPCM7xx OTP device model Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 28/36] hw/ssi: NPCM7xx Flash Interface Unit device model Peter Maydell
` (8 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This just implements the bare minimum to cause the boot block to skip
memory initialization.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-10-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/npcm7xx.h | 2 +
include/hw/mem/npcm7xx_mc.h | 36 ++++++++++++++++
hw/arm/npcm7xx.c | 6 +++
hw/mem/npcm7xx_mc.c | 84 +++++++++++++++++++++++++++++++++++++
hw/mem/meson.build | 1 +
5 files changed, 129 insertions(+)
create mode 100644 include/hw/mem/npcm7xx_mc.h
create mode 100644 hw/mem/npcm7xx_mc.c
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index 5816a07a72e..9fa84a0702f 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -18,6 +18,7 @@
#include "hw/boards.h"
#include "hw/cpu/a9mpcore.h"
+#include "hw/mem/npcm7xx_mc.h"
#include "hw/misc/npcm7xx_clk.h"
#include "hw/misc/npcm7xx_gcr.h"
#include "hw/nvram/npcm7xx_otp.h"
@@ -71,6 +72,7 @@ typedef struct NPCM7xxState {
NPCM7xxTimerCtrlState tim[3];
NPCM7xxOTPState key_storage;
NPCM7xxOTPState fuse_array;
+ NPCM7xxMCState mc;
} NPCM7xxState;
#define TYPE_NPCM7XX "npcm7xx"
diff --git a/include/hw/mem/npcm7xx_mc.h b/include/hw/mem/npcm7xx_mc.h
new file mode 100644
index 00000000000..7ed38be2431
--- /dev/null
+++ b/include/hw/mem/npcm7xx_mc.h
@@ -0,0 +1,36 @@
+/*
+ * Nuvoton NPCM7xx Memory Controller stub
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_MC_H
+#define NPCM7XX_MC_H
+
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+
+/**
+ * struct NPCM7xxMCState - Device state for the memory controller.
+ * @parent: System bus device.
+ * @mmio: Memory region through which registers are accessed.
+ */
+typedef struct NPCM7xxMCState {
+ SysBusDevice parent;
+
+ MemoryRegion mmio;
+} NPCM7xxMCState;
+
+#define TYPE_NPCM7XX_MC "npcm7xx-mc"
+#define NPCM7XX_MC(obj) OBJECT_CHECK(NPCM7xxMCState, (obj), TYPE_NPCM7XX_MC)
+
+#endif /* NPCM7XX_MC_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 91660025984..6bb1693833e 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -43,6 +43,7 @@
#define NPCM7XX_CPUP_BA (0xf03fe000)
#define NPCM7XX_GCR_BA (0xf0800000)
#define NPCM7XX_CLK_BA (0xf0801000)
+#define NPCM7XX_MC_BA (0xf0824000)
/* Internal AHB SRAM */
#define NPCM7XX_RAM3_BA (0xc0008000)
@@ -186,6 +187,7 @@ static void npcm7xx_init(Object *obj)
TYPE_NPCM7XX_KEY_STORAGE);
object_initialize_child(obj, "otp2", &s->fuse_array,
TYPE_NPCM7XX_FUSE_ARRAY);
+ object_initialize_child(obj, "mc", &s->mc, TYPE_NPCM7XX_MC);
for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
@@ -261,6 +263,10 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
sysbus_mmio_map(SYS_BUS_DEVICE(&s->fuse_array), 0, NPCM7XX_OTP2_BA);
npcm7xx_init_fuses(s);
+ /* Fake Memory Controller (MC). Cannot fail. */
+ sysbus_realize(SYS_BUS_DEVICE(&s->mc), &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->mc), 0, NPCM7XX_MC_BA);
+
/* Timer Modules (TIM). Cannot fail. */
QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_tim_addr) != ARRAY_SIZE(s->tim));
for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
diff --git a/hw/mem/npcm7xx_mc.c b/hw/mem/npcm7xx_mc.c
new file mode 100644
index 00000000000..0435d06ab44
--- /dev/null
+++ b/hw/mem/npcm7xx_mc.c
@@ -0,0 +1,84 @@
+/*
+ * Nuvoton NPCM7xx Memory Controller stub
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/mem/npcm7xx_mc.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+
+#define NPCM7XX_MC_REGS_SIZE (4 * KiB)
+
+static uint64_t npcm7xx_mc_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ /*
+ * If bits 8..11 @ offset 0 are not zero, the boot block thinks the memory
+ * controller has already been initialized and will skip DDR training.
+ */
+ if (addr == 0) {
+ return 0x100;
+ }
+
+ qemu_log_mask(LOG_UNIMP, "%s: mostly unimplemented\n", __func__);
+
+ return 0;
+}
+
+static void npcm7xx_mc_write(void *opaque, hwaddr addr, uint64_t v,
+ unsigned int size)
+{
+ qemu_log_mask(LOG_UNIMP, "%s: mostly unimplemented\n", __func__);
+}
+
+static const MemoryRegionOps npcm7xx_mc_ops = {
+ .read = npcm7xx_mc_read,
+ .write = npcm7xx_mc_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void npcm7xx_mc_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxMCState *s = NPCM7XX_MC(dev);
+
+ memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_mc_ops, s, "regs",
+ NPCM7XX_MC_REGS_SIZE);
+ sysbus_init_mmio(&s->parent, &s->mmio);
+}
+
+static void npcm7xx_mc_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "NPCM7xx Memory Controller stub";
+ dc->realize = npcm7xx_mc_realize;
+}
+
+static const TypeInfo npcm7xx_mc_types[] = {
+ {
+ .name = TYPE_NPCM7XX_MC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxMCState),
+ .class_init = npcm7xx_mc_class_init,
+ },
+};
+DEFINE_TYPES(npcm7xx_mc_types);
diff --git a/hw/mem/meson.build b/hw/mem/meson.build
index ba424622bbb..0d22f2b5727 100644
--- a/hw/mem/meson.build
+++ b/hw/mem/meson.build
@@ -1,6 +1,7 @@
mem_ss = ss.source_set()
mem_ss.add(files('memory-device.c'))
mem_ss.add(when: 'CONFIG_DIMM', if_true: files('pc-dimm.c'))
+mem_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_mc.c'))
mem_ss.add(when: 'CONFIG_NVDIMM', if_true: files('nvdimm.c'))
softmmu_ss.add_all(when: 'CONFIG_MEM_DEVICE', if_true: mem_ss)
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 28/36] hw/ssi: NPCM7xx Flash Interface Unit device model
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (26 preceding siblings ...)
2020-09-14 14:06 ` [PULL 27/36] hw/mem: Stubbed out NPCM7xx Memory Controller model Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 29/36] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Peter Maydell
` (7 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This implements a device model for the NPCM7xx SPI flash controller.
Direct reads and writes, and user-mode transactions have been tested in
various modes. Protection features are not implemented yet.
All the FIU instances are available in the SoC's address space,
regardless of whether or not they're connected to actual flash chips.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-11-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/npcm7xx.h | 2 +
include/hw/ssi/npcm7xx_fiu.h | 73 +++++
hw/arm/npcm7xx.c | 58 ++++
hw/ssi/npcm7xx_fiu.c | 572 +++++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
hw/ssi/meson.build | 1 +
hw/ssi/trace-events | 11 +
7 files changed, 718 insertions(+)
create mode 100644 include/hw/ssi/npcm7xx_fiu.h
create mode 100644 hw/ssi/npcm7xx_fiu.c
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index 9fa84a0702f..78d0d78c522 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -23,6 +23,7 @@
#include "hw/misc/npcm7xx_gcr.h"
#include "hw/nvram/npcm7xx_otp.h"
#include "hw/timer/npcm7xx_timer.h"
+#include "hw/ssi/npcm7xx_fiu.h"
#include "target/arm/cpu.h"
#define NPCM7XX_MAX_NUM_CPUS (2)
@@ -73,6 +74,7 @@ typedef struct NPCM7xxState {
NPCM7xxOTPState key_storage;
NPCM7xxOTPState fuse_array;
NPCM7xxMCState mc;
+ NPCM7xxFIUState fiu[2];
} NPCM7xxState;
#define TYPE_NPCM7XX "npcm7xx"
diff --git a/include/hw/ssi/npcm7xx_fiu.h b/include/hw/ssi/npcm7xx_fiu.h
new file mode 100644
index 00000000000..a3a17042896
--- /dev/null
+++ b/include/hw/ssi/npcm7xx_fiu.h
@@ -0,0 +1,73 @@
+/*
+ * Nuvoton NPCM7xx Flash Interface Unit (FIU)
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef NPCM7XX_FIU_H
+#define NPCM7XX_FIU_H
+
+#include "hw/ssi/ssi.h"
+#include "hw/sysbus.h"
+
+/*
+ * Number of registers in our device state structure. Don't change this without
+ * incrementing the version_id in the vmstate.
+ */
+#define NPCM7XX_FIU_NR_REGS (0x7c / sizeof(uint32_t))
+
+typedef struct NPCM7xxFIUState NPCM7xxFIUState;
+
+/**
+ * struct NPCM7xxFIUFlash - Per-chipselect flash controller state.
+ * @direct_access: Memory region for direct flash access.
+ * @fiu: Pointer to flash controller shared state.
+ */
+typedef struct NPCM7xxFIUFlash {
+ MemoryRegion direct_access;
+ NPCM7xxFIUState *fiu;
+} NPCM7xxFIUFlash;
+
+/**
+ * NPCM7xxFIUState - Device state for one Flash Interface Unit.
+ * @parent: System bus device.
+ * @mmio: Memory region for register access.
+ * @cs_count: Number of flash chips that may be connected to this module.
+ * @active_cs: Currently active chip select, or -1 if no chip is selected.
+ * @cs_lines: GPIO lines that may be wired to flash chips.
+ * @flash: Array of @cs_count per-flash-chip state objects.
+ * @spi: The SPI bus mastered by this controller.
+ * @regs: Register contents.
+ *
+ * Each FIU has a shared bank of registers, and controls up to four chip
+ * selects. Each chip select has a dedicated memory region which may be used to
+ * read and write the flash connected to that chip select as if it were memory.
+ */
+struct NPCM7xxFIUState {
+ SysBusDevice parent;
+
+ MemoryRegion mmio;
+
+ int32_t cs_count;
+ int32_t active_cs;
+ qemu_irq *cs_lines;
+ NPCM7xxFIUFlash *flash;
+
+ SSIBus *spi;
+
+ uint32_t regs[NPCM7XX_FIU_NR_REGS];
+};
+
+#define TYPE_NPCM7XX_FIU "npcm7xx-fiu"
+#define NPCM7XX_FIU(obj) OBJECT_CHECK(NPCM7xxFIUState, (obj), TYPE_NPCM7XX_FIU)
+
+#endif /* NPCM7XX_FIU_H */
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 6bb1693833e..7884b2b03d5 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -99,6 +99,39 @@ static const hwaddr npcm7xx_uart_addr[] = {
0xf0004000,
};
+/* Direct memory-mapped access to SPI0 CS0-1. */
+static const hwaddr npcm7xx_fiu0_flash_addr[] = {
+ 0x80000000, /* CS0 */
+ 0x88000000, /* CS1 */
+};
+
+/* Direct memory-mapped access to SPI3 CS0-3. */
+static const hwaddr npcm7xx_fiu3_flash_addr[] = {
+ 0xa0000000, /* CS0 */
+ 0xa8000000, /* CS1 */
+ 0xb0000000, /* CS2 */
+ 0xb8000000, /* CS3 */
+};
+
+static const struct {
+ const char *name;
+ hwaddr regs_addr;
+ int cs_count;
+ const hwaddr *flash_addr;
+} npcm7xx_fiu[] = {
+ {
+ .name = "fiu0",
+ .regs_addr = 0xfb000000,
+ .cs_count = ARRAY_SIZE(npcm7xx_fiu0_flash_addr),
+ .flash_addr = npcm7xx_fiu0_flash_addr,
+ }, {
+ .name = "fiu3",
+ .regs_addr = 0xc0000000,
+ .cs_count = ARRAY_SIZE(npcm7xx_fiu3_flash_addr),
+ .flash_addr = npcm7xx_fiu3_flash_addr,
+ },
+};
+
static void npcm7xx_write_secondary_boot(ARMCPU *cpu,
const struct arm_boot_info *info)
{
@@ -192,6 +225,12 @@ static void npcm7xx_init(Object *obj)
for (i = 0; i < ARRAY_SIZE(s->tim); i++) {
object_initialize_child(obj, "tim[*]", &s->tim[i], TYPE_NPCM7XX_TIMER);
}
+
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_fiu) != ARRAY_SIZE(s->fiu));
+ for (i = 0; i < ARRAY_SIZE(s->fiu); i++) {
+ object_initialize_child(obj, npcm7xx_fiu[i].name, &s->fiu[i],
+ TYPE_NPCM7XX_FIU);
+ }
}
static void npcm7xx_realize(DeviceState *dev, Error **errp)
@@ -291,6 +330,25 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
serial_hd(i), DEVICE_LITTLE_ENDIAN);
}
+ /*
+ * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
+ * specified, but this is a programming error.
+ */
+ QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_fiu) != ARRAY_SIZE(s->fiu));
+ for (i = 0; i < ARRAY_SIZE(s->fiu); i++) {
+ SysBusDevice *sbd = SYS_BUS_DEVICE(&s->fiu[i]);
+ int j;
+
+ object_property_set_int(OBJECT(sbd), "cs-count",
+ npcm7xx_fiu[i].cs_count, &error_abort);
+ sysbus_realize(sbd, &error_abort);
+
+ sysbus_mmio_map(sbd, 0, npcm7xx_fiu[i].regs_addr);
+ for (j = 0; j < npcm7xx_fiu[i].cs_count; j++) {
+ sysbus_mmio_map(sbd, j + 1, npcm7xx_fiu[i].flash_addr[j]);
+ }
+ }
+
/* RAM2 (SRAM) */
memory_region_init_ram(&s->sram, OBJECT(dev), "ram2",
NPCM7XX_RAM2_SZ, &error_abort);
diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c
new file mode 100644
index 00000000000..104e8f2b963
--- /dev/null
+++ b/hw/ssi/npcm7xx_fiu.c
@@ -0,0 +1,572 @@
+/*
+ * Nuvoton NPCM7xx Flash Interface Unit (FIU)
+ *
+ * Copyright 2020 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "hw/ssi/npcm7xx_fiu.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qemu/units.h"
+
+#include "trace.h"
+
+/* Up to 128 MiB of flash may be accessed directly as memory. */
+#define NPCM7XX_FIU_FLASH_WINDOW_SIZE (128 * MiB)
+
+/* Each module has 4 KiB of register space. Only a fraction of it is used. */
+#define NPCM7XX_FIU_CTRL_REGS_SIZE (4 * KiB)
+
+/* 32-bit FIU register indices. */
+enum NPCM7xxFIURegister {
+ NPCM7XX_FIU_DRD_CFG,
+ NPCM7XX_FIU_DWR_CFG,
+ NPCM7XX_FIU_UMA_CFG,
+ NPCM7XX_FIU_UMA_CTS,
+ NPCM7XX_FIU_UMA_CMD,
+ NPCM7XX_FIU_UMA_ADDR,
+ NPCM7XX_FIU_PRT_CFG,
+ NPCM7XX_FIU_UMA_DW0 = 0x0020 / sizeof(uint32_t),
+ NPCM7XX_FIU_UMA_DW1,
+ NPCM7XX_FIU_UMA_DW2,
+ NPCM7XX_FIU_UMA_DW3,
+ NPCM7XX_FIU_UMA_DR0,
+ NPCM7XX_FIU_UMA_DR1,
+ NPCM7XX_FIU_UMA_DR2,
+ NPCM7XX_FIU_UMA_DR3,
+ NPCM7XX_FIU_PRT_CMD0,
+ NPCM7XX_FIU_PRT_CMD1,
+ NPCM7XX_FIU_PRT_CMD2,
+ NPCM7XX_FIU_PRT_CMD3,
+ NPCM7XX_FIU_PRT_CMD4,
+ NPCM7XX_FIU_PRT_CMD5,
+ NPCM7XX_FIU_PRT_CMD6,
+ NPCM7XX_FIU_PRT_CMD7,
+ NPCM7XX_FIU_PRT_CMD8,
+ NPCM7XX_FIU_PRT_CMD9,
+ NPCM7XX_FIU_CFG = 0x78 / sizeof(uint32_t),
+ NPCM7XX_FIU_REGS_END,
+};
+
+/* FIU_{DRD,DWR,UMA,PTR}_CFG cannot be written when this bit is set. */
+#define NPCM7XX_FIU_CFG_LCK BIT(31)
+
+/* Direct Read configuration register fields. */
+#define FIU_DRD_CFG_ADDSIZ(rv) extract32(rv, 16, 2)
+#define FIU_ADDSIZ_3BYTES 0
+#define FIU_ADDSIZ_4BYTES 1
+#define FIU_DRD_CFG_DBW(rv) extract32(rv, 12, 2)
+#define FIU_DRD_CFG_ACCTYPE(rv) extract32(rv, 8, 2)
+#define FIU_DRD_CFG_RDCMD(rv) extract32(rv, 0, 8)
+
+/* Direct Write configuration register fields. */
+#define FIU_DWR_CFG_ADDSIZ(rv) extract32(rv, 16, 2)
+#define FIU_DWR_CFG_WRCMD(rv) extract32(rv, 0, 8)
+
+/* User-Mode Access register fields. */
+
+/* Command Mode Lock and the bits protected by it. */
+#define FIU_UMA_CFG_CMMLCK BIT(30)
+#define FIU_UMA_CFG_CMMLCK_MASK 0x00000403
+
+#define FIU_UMA_CFG_RDATSIZ(rv) extract32(rv, 24, 5)
+#define FIU_UMA_CFG_DBSIZ(rv) extract32(rv, 21, 3)
+#define FIU_UMA_CFG_WDATSIZ(rv) extract32(rv, 16, 5)
+#define FIU_UMA_CFG_ADDSIZ(rv) extract32(rv, 11, 3)
+#define FIU_UMA_CFG_CMDSIZ(rv) extract32(rv, 10, 1)
+#define FIU_UMA_CFG_DBPCK(rv) extract32(rv, 6, 2)
+
+#define FIU_UMA_CTS_RDYIE BIT(25)
+#define FIU_UMA_CTS_RDYST BIT(24)
+#define FIU_UMA_CTS_SW_CS BIT(16)
+#define FIU_UMA_CTS_DEV_NUM(rv) extract32(rv, 8, 2)
+#define FIU_UMA_CTS_EXEC_DONE BIT(0)
+
+/*
+ * Returns the index of flash in the fiu->flash array. This corresponds to the
+ * chip select ID of the flash.
+ */
+static int npcm7xx_fiu_cs_index(NPCM7xxFIUState *fiu, NPCM7xxFIUFlash *flash)
+{
+ int index = flash - fiu->flash;
+
+ g_assert(index >= 0 && index < fiu->cs_count);
+
+ return index;
+}
+
+/* Assert the chip select specified in the UMA Control/Status Register. */
+static void npcm7xx_fiu_select(NPCM7xxFIUState *s, int cs_id)
+{
+ trace_npcm7xx_fiu_select(DEVICE(s)->canonical_path, cs_id);
+
+ if (cs_id < s->cs_count) {
+ qemu_irq_lower(s->cs_lines[cs_id]);
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: UMA to CS%d; this module has only %d chip selects",
+ DEVICE(s)->canonical_path, cs_id, s->cs_count);
+ cs_id = -1;
+ }
+
+ s->active_cs = cs_id;
+}
+
+/* Deassert the currently active chip select. */
+static void npcm7xx_fiu_deselect(NPCM7xxFIUState *s)
+{
+ if (s->active_cs < 0) {
+ return;
+ }
+
+ trace_npcm7xx_fiu_deselect(DEVICE(s)->canonical_path, s->active_cs);
+
+ qemu_irq_raise(s->cs_lines[s->active_cs]);
+ s->active_cs = -1;
+}
+
+/* Direct flash memory read handler. */
+static uint64_t npcm7xx_fiu_flash_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ NPCM7xxFIUFlash *f = opaque;
+ NPCM7xxFIUState *fiu = f->fiu;
+ uint64_t value = 0;
+ uint32_t drd_cfg;
+ int dummy_cycles;
+ int i;
+
+ if (fiu->active_cs != -1) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: direct flash read with CS%d already active",
+ DEVICE(fiu)->canonical_path, fiu->active_cs);
+ }
+
+ npcm7xx_fiu_select(fiu, npcm7xx_fiu_cs_index(fiu, f));
+
+ drd_cfg = fiu->regs[NPCM7XX_FIU_DRD_CFG];
+ ssi_transfer(fiu->spi, FIU_DRD_CFG_RDCMD(drd_cfg));
+
+ switch (FIU_DRD_CFG_ADDSIZ(drd_cfg)) {
+ case FIU_ADDSIZ_4BYTES:
+ ssi_transfer(fiu->spi, extract32(addr, 24, 8));
+ /* fall through */
+ case FIU_ADDSIZ_3BYTES:
+ ssi_transfer(fiu->spi, extract32(addr, 16, 8));
+ ssi_transfer(fiu->spi, extract32(addr, 8, 8));
+ ssi_transfer(fiu->spi, extract32(addr, 0, 8));
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: bad address size %d\n",
+ DEVICE(fiu)->canonical_path, FIU_DRD_CFG_ADDSIZ(drd_cfg));
+ break;
+ }
+
+ /* Flash chip model expects one transfer per dummy bit, not byte */
+ dummy_cycles =
+ (FIU_DRD_CFG_DBW(drd_cfg) * 8) >> FIU_DRD_CFG_ACCTYPE(drd_cfg);
+ for (i = 0; i < dummy_cycles; i++) {
+ ssi_transfer(fiu->spi, 0);
+ }
+
+ for (i = 0; i < size; i++) {
+ value = deposit64(value, 8 * i, 8, ssi_transfer(fiu->spi, 0));
+ }
+
+ trace_npcm7xx_fiu_flash_read(DEVICE(fiu)->canonical_path, fiu->active_cs,
+ addr, size, value);
+
+ npcm7xx_fiu_deselect(fiu);
+
+ return value;
+}
+
+/* Direct flash memory write handler. */
+static void npcm7xx_fiu_flash_write(void *opaque, hwaddr addr, uint64_t v,
+ unsigned int size)
+{
+ NPCM7xxFIUFlash *f = opaque;
+ NPCM7xxFIUState *fiu = f->fiu;
+ uint32_t dwr_cfg;
+ int cs_id;
+ int i;
+
+ if (fiu->active_cs != -1) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: direct flash write with CS%d already active",
+ DEVICE(fiu)->canonical_path, fiu->active_cs);
+ }
+
+ cs_id = npcm7xx_fiu_cs_index(fiu, f);
+ trace_npcm7xx_fiu_flash_write(DEVICE(fiu)->canonical_path, cs_id, addr,
+ size, v);
+ npcm7xx_fiu_select(fiu, cs_id);
+
+ dwr_cfg = fiu->regs[NPCM7XX_FIU_DWR_CFG];
+ ssi_transfer(fiu->spi, FIU_DWR_CFG_WRCMD(dwr_cfg));
+
+ switch (FIU_DWR_CFG_ADDSIZ(dwr_cfg)) {
+ case FIU_ADDSIZ_4BYTES:
+ ssi_transfer(fiu->spi, extract32(addr, 24, 8));
+ /* fall through */
+ case FIU_ADDSIZ_3BYTES:
+ ssi_transfer(fiu->spi, extract32(addr, 16, 8));
+ ssi_transfer(fiu->spi, extract32(addr, 8, 8));
+ ssi_transfer(fiu->spi, extract32(addr, 0, 8));
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: bad address size %d\n",
+ DEVICE(fiu)->canonical_path, FIU_DWR_CFG_ADDSIZ(dwr_cfg));
+ break;
+ }
+
+ for (i = 0; i < size; i++) {
+ ssi_transfer(fiu->spi, extract64(v, i * 8, 8));
+ }
+
+ npcm7xx_fiu_deselect(fiu);
+}
+
+static const MemoryRegionOps npcm7xx_fiu_flash_ops = {
+ .read = npcm7xx_fiu_flash_read,
+ .write = npcm7xx_fiu_flash_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ .unaligned = true,
+ },
+};
+
+/* Control register read handler. */
+static uint64_t npcm7xx_fiu_ctrl_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ hwaddr reg = addr / sizeof(uint32_t);
+ NPCM7xxFIUState *s = opaque;
+ uint32_t value;
+
+ if (reg < NPCM7XX_FIU_NR_REGS) {
+ value = s->regs[reg];
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: read from invalid offset 0x%" PRIx64 "\n",
+ DEVICE(s)->canonical_path, addr);
+ value = 0;
+ }
+
+ trace_npcm7xx_fiu_ctrl_read(DEVICE(s)->canonical_path, addr, value);
+
+ return value;
+}
+
+/* Send the specified number of address bytes from the UMA address register. */
+static void send_address(SSIBus *spi, unsigned int addsiz, uint32_t addr)
+{
+ switch (addsiz) {
+ case 4:
+ ssi_transfer(spi, extract32(addr, 24, 8));
+ /* fall through */
+ case 3:
+ ssi_transfer(spi, extract32(addr, 16, 8));
+ /* fall through */
+ case 2:
+ ssi_transfer(spi, extract32(addr, 8, 8));
+ /* fall through */
+ case 1:
+ ssi_transfer(spi, extract32(addr, 0, 8));
+ /* fall through */
+ case 0:
+ break;
+ }
+}
+
+/* Send the number of dummy bits specified in the UMA config register. */
+static void send_dummy_bits(SSIBus *spi, uint32_t uma_cfg, uint32_t uma_cmd)
+{
+ unsigned int bits_per_clock = 1U << FIU_UMA_CFG_DBPCK(uma_cfg);
+ unsigned int i;
+
+ for (i = 0; i < FIU_UMA_CFG_DBSIZ(uma_cfg); i++) {
+ /* Use bytes 0 and 1 first, then keep repeating byte 2 */
+ unsigned int field = (i < 2) ? ((i + 1) * 8) : 24;
+ unsigned int j;
+
+ for (j = 0; j < 8; j += bits_per_clock) {
+ ssi_transfer(spi, extract32(uma_cmd, field + j, bits_per_clock));
+ }
+ }
+}
+
+/* Perform a User-Mode Access transaction. */
+static void npcm7xx_fiu_uma_transaction(NPCM7xxFIUState *s)
+{
+ uint32_t uma_cts = s->regs[NPCM7XX_FIU_UMA_CTS];
+ uint32_t uma_cfg;
+ unsigned int i;
+
+ /* SW_CS means the CS is already forced low, so don't touch it. */
+ if (uma_cts & FIU_UMA_CTS_SW_CS) {
+ int cs_id = FIU_UMA_CTS_DEV_NUM(s->regs[NPCM7XX_FIU_UMA_CTS]);
+ npcm7xx_fiu_select(s, cs_id);
+ }
+
+ /* Send command, if present. */
+ uma_cfg = s->regs[NPCM7XX_FIU_UMA_CFG];
+ if (FIU_UMA_CFG_CMDSIZ(uma_cfg) > 0) {
+ ssi_transfer(s->spi, extract32(s->regs[NPCM7XX_FIU_UMA_CMD], 0, 8));
+ }
+
+ /* Send address, if present. */
+ send_address(s->spi, FIU_UMA_CFG_ADDSIZ(uma_cfg),
+ s->regs[NPCM7XX_FIU_UMA_ADDR]);
+
+ /* Write data, if present. */
+ for (i = 0; i < FIU_UMA_CFG_WDATSIZ(uma_cfg); i++) {
+ unsigned int reg =
+ (i < 16) ? (NPCM7XX_FIU_UMA_DW0 + i / 4) : NPCM7XX_FIU_UMA_DW3;
+ unsigned int field = (i % 4) * 8;
+
+ ssi_transfer(s->spi, extract32(s->regs[reg], field, 8));
+ }
+
+ /* Send dummy bits, if present. */
+ send_dummy_bits(s->spi, uma_cfg, s->regs[NPCM7XX_FIU_UMA_CMD]);
+
+ /* Read data, if present. */
+ for (i = 0; i < FIU_UMA_CFG_RDATSIZ(uma_cfg); i++) {
+ unsigned int reg = NPCM7XX_FIU_UMA_DR0 + i / 4;
+ unsigned int field = (i % 4) * 8;
+ uint8_t c;
+
+ c = ssi_transfer(s->spi, 0);
+ if (reg <= NPCM7XX_FIU_UMA_DR3) {
+ s->regs[reg] = deposit32(s->regs[reg], field, 8, c);
+ }
+ }
+
+ /* Again, don't touch CS if the user is forcing it low. */
+ if (uma_cts & FIU_UMA_CTS_SW_CS) {
+ npcm7xx_fiu_deselect(s);
+ }
+
+ /* RDYST means a command has completed since it was cleared. */
+ s->regs[NPCM7XX_FIU_UMA_CTS] |= FIU_UMA_CTS_RDYST;
+ /* EXEC_DONE means Execute Command / Not Done, so clear it here. */
+ s->regs[NPCM7XX_FIU_UMA_CTS] &= ~FIU_UMA_CTS_EXEC_DONE;
+}
+
+/* Control register write handler. */
+static void npcm7xx_fiu_ctrl_write(void *opaque, hwaddr addr, uint64_t v,
+ unsigned int size)
+{
+ hwaddr reg = addr / sizeof(uint32_t);
+ NPCM7xxFIUState *s = opaque;
+ uint32_t value = v;
+
+ trace_npcm7xx_fiu_ctrl_write(DEVICE(s)->canonical_path, addr, value);
+
+ switch (reg) {
+ case NPCM7XX_FIU_UMA_CFG:
+ if (s->regs[reg] & FIU_UMA_CFG_CMMLCK) {
+ value &= ~FIU_UMA_CFG_CMMLCK_MASK;
+ value |= (s->regs[reg] & FIU_UMA_CFG_CMMLCK_MASK);
+ }
+ /* fall through */
+ case NPCM7XX_FIU_DRD_CFG:
+ case NPCM7XX_FIU_DWR_CFG:
+ if (s->regs[reg] & NPCM7XX_FIU_CFG_LCK) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: write to locked register @ 0x%" PRIx64 "\n",
+ DEVICE(s)->canonical_path, addr);
+ return;
+ }
+ s->regs[reg] = value;
+ break;
+
+ case NPCM7XX_FIU_UMA_CTS:
+ if (value & FIU_UMA_CTS_RDYST) {
+ value &= ~FIU_UMA_CTS_RDYST;
+ } else {
+ value |= s->regs[reg] & FIU_UMA_CTS_RDYST;
+ }
+ if ((s->regs[reg] ^ value) & FIU_UMA_CTS_SW_CS) {
+ if (value & FIU_UMA_CTS_SW_CS) {
+ /*
+ * Don't drop CS if there's a transfer in progress, or we're
+ * about to start one.
+ */
+ if (!((value | s->regs[reg]) & FIU_UMA_CTS_EXEC_DONE)) {
+ npcm7xx_fiu_deselect(s);
+ }
+ } else {
+ int cs_id = FIU_UMA_CTS_DEV_NUM(s->regs[NPCM7XX_FIU_UMA_CTS]);
+ npcm7xx_fiu_select(s, cs_id);
+ }
+ }
+ s->regs[reg] = value | (s->regs[reg] & FIU_UMA_CTS_EXEC_DONE);
+ if (value & FIU_UMA_CTS_EXEC_DONE) {
+ npcm7xx_fiu_uma_transaction(s);
+ }
+ break;
+
+ case NPCM7XX_FIU_UMA_DR0 ... NPCM7XX_FIU_UMA_DR3:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: write to read-only register @ 0x%" PRIx64 "\n",
+ DEVICE(s)->canonical_path, addr);
+ return;
+
+ case NPCM7XX_FIU_PRT_CFG:
+ case NPCM7XX_FIU_PRT_CMD0 ... NPCM7XX_FIU_PRT_CMD9:
+ qemu_log_mask(LOG_UNIMP, "%s: PRT is not implemented\n", __func__);
+ break;
+
+ case NPCM7XX_FIU_UMA_CMD:
+ case NPCM7XX_FIU_UMA_ADDR:
+ case NPCM7XX_FIU_UMA_DW0 ... NPCM7XX_FIU_UMA_DW3:
+ case NPCM7XX_FIU_CFG:
+ s->regs[reg] = value;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: write to invalid offset 0x%" PRIx64 "\n",
+ DEVICE(s)->canonical_path, addr);
+ return;
+ }
+}
+
+static const MemoryRegionOps npcm7xx_fiu_ctrl_ops = {
+ .read = npcm7xx_fiu_ctrl_read,
+ .write = npcm7xx_fiu_ctrl_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ .unaligned = false,
+ },
+};
+
+static void npcm7xx_fiu_enter_reset(Object *obj, ResetType type)
+{
+ NPCM7xxFIUState *s = NPCM7XX_FIU(obj);
+
+ trace_npcm7xx_fiu_enter_reset(DEVICE(obj)->canonical_path, type);
+
+ memset(s->regs, 0, sizeof(s->regs));
+
+ s->regs[NPCM7XX_FIU_DRD_CFG] = 0x0300100b;
+ s->regs[NPCM7XX_FIU_DWR_CFG] = 0x03000002;
+ s->regs[NPCM7XX_FIU_UMA_CFG] = 0x00000400;
+ s->regs[NPCM7XX_FIU_UMA_CTS] = 0x00010000;
+ s->regs[NPCM7XX_FIU_UMA_CMD] = 0x0000000b;
+ s->regs[NPCM7XX_FIU_PRT_CFG] = 0x00000400;
+ s->regs[NPCM7XX_FIU_CFG] = 0x0000000b;
+}
+
+static void npcm7xx_fiu_hold_reset(Object *obj)
+{
+ NPCM7xxFIUState *s = NPCM7XX_FIU(obj);
+ int i;
+
+ trace_npcm7xx_fiu_hold_reset(DEVICE(obj)->canonical_path);
+
+ for (i = 0; i < s->cs_count; i++) {
+ qemu_irq_raise(s->cs_lines[i]);
+ }
+}
+
+static void npcm7xx_fiu_realize(DeviceState *dev, Error **errp)
+{
+ NPCM7xxFIUState *s = NPCM7XX_FIU(dev);
+ SysBusDevice *sbd = &s->parent;
+ int i;
+
+ if (s->cs_count <= 0) {
+ error_setg(errp, "%s: %d chip selects specified, need at least one",
+ dev->canonical_path, s->cs_count);
+ return;
+ }
+
+ s->spi = ssi_create_bus(dev, "spi");
+ s->cs_lines = g_new0(qemu_irq, s->cs_count);
+ qdev_init_gpio_out_named(DEVICE(s), s->cs_lines, "cs", s->cs_count);
+ s->flash = g_new0(NPCM7xxFIUFlash, s->cs_count);
+
+ /*
+ * Register the control registers region first. It may be followed by one
+ * or more direct flash access regions.
+ */
+ memory_region_init_io(&s->mmio, OBJECT(s), &npcm7xx_fiu_ctrl_ops, s, "ctrl",
+ NPCM7XX_FIU_CTRL_REGS_SIZE);
+ sysbus_init_mmio(sbd, &s->mmio);
+
+ for (i = 0; i < s->cs_count; i++) {
+ NPCM7xxFIUFlash *flash = &s->flash[i];
+ flash->fiu = s;
+ memory_region_init_io(&flash->direct_access, OBJECT(s),
+ &npcm7xx_fiu_flash_ops, &s->flash[i], "flash",
+ NPCM7XX_FIU_FLASH_WINDOW_SIZE);
+ sysbus_init_mmio(sbd, &flash->direct_access);
+ }
+}
+
+static const VMStateDescription vmstate_npcm7xx_fiu = {
+ .name = "npcm7xx-fiu",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT32(active_cs, NPCM7xxFIUState),
+ VMSTATE_UINT32_ARRAY(regs, NPCM7xxFIUState, NPCM7XX_FIU_NR_REGS),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static Property npcm7xx_fiu_properties[] = {
+ DEFINE_PROP_INT32("cs-count", NPCM7xxFIUState, cs_count, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void npcm7xx_fiu_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ QEMU_BUILD_BUG_ON(NPCM7XX_FIU_REGS_END > NPCM7XX_FIU_NR_REGS);
+
+ dc->desc = "NPCM7xx Flash Interface Unit";
+ dc->realize = npcm7xx_fiu_realize;
+ dc->vmsd = &vmstate_npcm7xx_fiu;
+ rc->phases.enter = npcm7xx_fiu_enter_reset;
+ rc->phases.hold = npcm7xx_fiu_hold_reset;
+ device_class_set_props(dc, npcm7xx_fiu_properties);
+}
+
+static const TypeInfo npcm7xx_fiu_types[] = {
+ {
+ .name = TYPE_NPCM7XX_FIU,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(NPCM7xxFIUState),
+ .class_init = npcm7xx_fiu_class_init,
+ },
+};
+DEFINE_TYPES(npcm7xx_fiu_types);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index cd74642034b..f303c6bead2 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -361,6 +361,7 @@ config NPCM7XX
select ARM_GIC
select PL310 # cache controller
select SERIAL
+ select SSI
select UNIMP
config FSL_IMX25
diff --git a/hw/ssi/meson.build b/hw/ssi/meson.build
index f1f5c287d00..dee00c0da63 100644
--- a/hw/ssi/meson.build
+++ b/hw/ssi/meson.build
@@ -1,5 +1,6 @@
softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_smc.c'))
softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('mss-spi.c'))
+softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_fiu.c'))
softmmu_ss.add(when: 'CONFIG_PL022', if_true: files('pl022.c'))
softmmu_ss.add(when: 'CONFIG_SSI', if_true: files('ssi.c'))
softmmu_ss.add(when: 'CONFIG_STM32F2XX_SPI', if_true: files('stm32f2xx_spi.c'))
diff --git a/hw/ssi/trace-events b/hw/ssi/trace-events
index 0ea498de910..2f83ef833fb 100644
--- a/hw/ssi/trace-events
+++ b/hw/ssi/trace-events
@@ -9,3 +9,14 @@ aspeed_smc_dma_checksum(uint32_t addr, uint32_t data) "0x%08x: 0x%08x"
aspeed_smc_dma_rw(const char *dir, uint32_t flash_addr, uint32_t dram_addr, uint32_t size) "%s flash:@0x%08x dram:@0x%08x size:0x%08x"
aspeed_smc_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64 " size %u: 0x%" PRIx64
aspeed_smc_flash_select(int cs, const char *prefix) "CS%d %sselect"
+
+# npcm7xx_fiu.c
+
+npcm7xx_fiu_enter_reset(const char *id, int reset_type) "%s reset type: %d"
+npcm7xx_fiu_hold_reset(const char *id) "%s"
+npcm7xx_fiu_select(const char *id, int cs) "%s select CS%d"
+npcm7xx_fiu_deselect(const char *id, int cs) "%s deselect CS%d"
+npcm7xx_fiu_ctrl_read(const char *id, uint64_t addr, uint32_t data) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_fiu_ctrl_write(const char *id, uint64_t addr, uint32_t data) "%s offset: 0x%04" PRIx64 " value: 0x%08" PRIx32
+npcm7xx_fiu_flash_read(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64
+npcm7xx_fiu_flash_write(const char *id, int cs, uint64_t addr, unsigned int size, uint64_t value) "%s[%d] offset: 0x%08" PRIx64 " size: %u value: 0x%" PRIx64
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 29/36] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (27 preceding siblings ...)
2020-09-14 14:06 ` [PULL 28/36] hw/ssi: NPCM7xx Flash Interface Unit device model Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 30/36] hw/arm/npcm7xx: add board setup stub for CPU and UART clocks Peter Maydell
` (6 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This allows these NPCM7xx-based boards to boot from a flash image, e.g.
one built with OpenBMC. For example like this:
IMAGE=${OPENBMC}/build/tmp/deploy/images/gsj/image-bmc
qemu-system-arm -machine quanta-gsj -nographic \
-drive file=${IMAGE},if=mtd,bus=0,unit=0,format=raw,snapshot=on
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200911052101.2602693-12-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/arm/npcm7xx_boards.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index b4c772d6b52..79e2e2744ca 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -20,6 +20,7 @@
#include "hw/arm/npcm7xx.h"
#include "hw/core/cpu.h"
#include "hw/loader.h"
+#include "hw/qdev-properties.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "qemu/units.h"
@@ -55,6 +56,22 @@ static void npcm7xx_load_bootrom(MachineState *machine, NPCM7xxState *soc)
}
}
+static void npcm7xx_connect_flash(NPCM7xxFIUState *fiu, int cs_no,
+ const char *flash_type, DriveInfo *dinfo)
+{
+ DeviceState *flash;
+ qemu_irq flash_cs;
+
+ flash = qdev_new(flash_type);
+ if (dinfo) {
+ qdev_prop_set_drive(flash, "drive", blk_by_legacy_dinfo(dinfo));
+ }
+ qdev_realize_and_unref(flash, BUS(fiu->spi), &error_fatal);
+
+ flash_cs = qdev_get_gpio_in_named(flash, SSI_GPIO_CS, 0);
+ qdev_connect_gpio_out_named(DEVICE(fiu), "cs", cs_no, flash_cs);
+}
+
static void npcm7xx_connect_dram(NPCM7xxState *soc, MemoryRegion *dram)
{
memory_region_add_subregion(get_system_memory(), NPCM7XX_DRAM_BA, dram);
@@ -92,6 +109,7 @@ static void npcm750_evb_init(MachineState *machine)
qdev_realize(DEVICE(soc), NULL, &error_fatal);
npcm7xx_load_bootrom(machine, soc);
+ npcm7xx_connect_flash(&soc->fiu[0], 0, "w25q256", drive_get(IF_MTD, 0, 0));
npcm7xx_load_kernel(machine, soc);
}
@@ -104,6 +122,8 @@ static void quanta_gsj_init(MachineState *machine)
qdev_realize(DEVICE(soc), NULL, &error_fatal);
npcm7xx_load_bootrom(machine, soc);
+ npcm7xx_connect_flash(&soc->fiu[0], 0, "mx25l25635e",
+ drive_get(IF_MTD, 0, 0));
npcm7xx_load_kernel(machine, soc);
}
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 30/36] hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (28 preceding siblings ...)
2020-09-14 14:06 ` [PULL 29/36] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 31/36] docs/system: Add Nuvoton machine documentation Peter Maydell
` (5 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
When booting directly into a kernel, bypassing the boot loader, the CPU and
UART clocks are not set up correctly. This makes the system appear very
slow, and causes the initrd boot test to fail when optimization is off.
The UART clock must run at 24 MHz. The default 25 MHz reference clock
cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works
perfectly with the default /20 divider.
The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs
at 800 MHz by default, so we need to double the feedback divider as well
to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz).
We don't bother checking for PLL lock because we know our emulated PLLs
lock instantly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-13-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/npcm7xx.h | 1 +
hw/arm/npcm7xx.c | 32 ++++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index 78d0d78c522..13106af2151 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -37,6 +37,7 @@
#define NPCM7XX_SMP_LOADER_START (0xffff0000) /* Boot ROM */
#define NPCM7XX_SMP_BOOTREG_ADDR (0xf080013c) /* GCR.SCRPAD */
#define NPCM7XX_GIC_CPU_IF_ADDR (0xf03fe100) /* GIC within A9 */
+#define NPCM7XX_BOARD_SETUP_ADDR (0xffff1000) /* Boot ROM */
typedef struct NPCM7xxMachine {
MachineState parent;
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 7884b2b03d5..037f3a26f2e 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -55,6 +55,13 @@
#define NPCM7XX_ROM_BA (0xffff0000)
#define NPCM7XX_ROM_SZ (64 * KiB)
+/* Clock configuration values to be fixed up when bypassing bootloader */
+
+/* Run PLL1 at 1600 MHz */
+#define NPCM7XX_PLLCON1_FIXUP_VAL (0x00402101)
+/* Run the CPU from PLL1 and UART from PLL2 */
+#define NPCM7XX_CLKSEL_FIXUP_VAL (0x004aaba9)
+
/*
* Interrupt lines going into the GIC. This does not include internal Cortex-A9
* interrupts.
@@ -132,6 +139,29 @@ static const struct {
},
};
+static void npcm7xx_write_board_setup(ARMCPU *cpu,
+ const struct arm_boot_info *info)
+{
+ uint32_t board_setup[] = {
+ 0xe59f0010, /* ldr r0, clk_base_addr */
+ 0xe59f1010, /* ldr r1, pllcon1_value */
+ 0xe5801010, /* str r1, [r0, #16] */
+ 0xe59f100c, /* ldr r1, clksel_value */
+ 0xe5801004, /* str r1, [r0, #4] */
+ 0xe12fff1e, /* bx lr */
+ NPCM7XX_CLK_BA,
+ NPCM7XX_PLLCON1_FIXUP_VAL,
+ NPCM7XX_CLKSEL_FIXUP_VAL,
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(board_setup); i++) {
+ board_setup[i] = tswap32(board_setup[i]);
+ }
+ rom_add_blob_fixed("board-setup", board_setup, sizeof(board_setup),
+ info->board_setup_addr);
+}
+
static void npcm7xx_write_secondary_boot(ARMCPU *cpu,
const struct arm_boot_info *info)
{
@@ -170,6 +200,8 @@ static struct arm_boot_info npcm7xx_binfo = {
.gic_cpu_if_addr = NPCM7XX_GIC_CPU_IF_ADDR,
.write_secondary_boot = npcm7xx_write_secondary_boot,
.board_id = -1,
+ .board_setup_addr = NPCM7XX_BOARD_SETUP_ADDR,
+ .write_board_setup = npcm7xx_write_board_setup,
};
void npcm7xx_load_kernel(MachineState *machine, NPCM7xxState *soc)
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 31/36] docs/system: Add Nuvoton machine documentation
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (29 preceding siblings ...)
2020-09-14 14:06 ` [PULL 30/36] hw/arm/npcm7xx: add board setup stub for CPU and UART clocks Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj Peter Maydell
` (4 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-14-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
docs/system/arm/nuvoton.rst | 92 +++++++++++++++++++++++++++++++++++++
docs/system/target-arm.rst | 1 +
2 files changed, 93 insertions(+)
create mode 100644 docs/system/arm/nuvoton.rst
diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
new file mode 100644
index 00000000000..e3e1a3a3a73
--- /dev/null
+++ b/docs/system/arm/nuvoton.rst
@@ -0,0 +1,92 @@
+Nuvoton iBMC boards (``npcm750-evb``, ``quanta-gsj``)
+=====================================================
+
+The `Nuvoton iBMC`_ chips (NPCM7xx) are a family of ARM-based SoCs that are
+designed to be used as Baseboard Management Controllers (BMCs) in various
+servers. They all feature one or two ARM Cortex A9 CPU cores, as well as an
+assortment of peripherals targeted for either Enterprise or Data Center /
+Hyperscale applications. The former is a superset of the latter, so NPCM750 has
+all the peripherals of NPCM730 and more.
+
+.. _Nuvoton iBMC: https://www.nuvoton.com/products/cloud-computing/ibmc/
+
+The NPCM750 SoC has two Cortex A9 cores and is targeted for the Enterprise
+segment. The following machines are based on this chip :
+
+- ``npcm750-evb`` Nuvoton NPCM750 Evaluation board
+
+The NPCM730 SoC has two Cortex A9 cores and is targeted for Data Center and
+Hyperscale applications. The following machines are based on this chip :
+
+- ``quanta-gsj`` Quanta GSJ server BMC
+
+There are also two more SoCs, NPCM710 and NPCM705, which are single-core
+variants of NPCM750 and NPCM730, respectively. These are currently not
+supported by QEMU.
+
+Supported devices
+-----------------
+
+ * SMP (Dual Core Cortex-A9)
+ * Cortex-A9MPCore built-in peripherals: SCU, GIC, Global Timer, Private Timer
+ and Watchdog.
+ * SRAM, ROM and DRAM mappings
+ * System Global Control Registers (GCR)
+ * Clock and reset controller (CLK)
+ * Timer controller (TIM)
+ * Serial ports (16550-based)
+ * DDR4 memory controller (dummy interface indicating memory training is done)
+ * OTP controllers (no protection features)
+ * Flash Interface Unit (FIU; no protection features)
+
+Missing devices
+---------------
+
+ * GPIO controller
+ * LPC/eSPI host-to-BMC interface, including
+
+ * Keyboard and mouse controller interface (KBCI)
+ * Keyboard Controller Style (KCS) channels
+ * BIOS POST code FIFO
+ * System Wake-up Control (SWC)
+ * Shared memory (SHM)
+ * eSPI slave interface
+
+ * Ethernet controllers (GMAC and EMC)
+ * USB host (USBH)
+ * USB device (USBD)
+ * SMBus controller (SMBF)
+ * Peripheral SPI controller (PSPI)
+ * Analog to Digital Converter (ADC)
+ * SD/MMC host
+ * Random Number Generator (RNG)
+ * PECI interface
+ * Pulse Width Modulation (PWM)
+ * Tachometer
+ * PCI and PCIe root complex and bridges
+ * VDM and MCTP support
+ * Serial I/O expansion
+ * LPC/eSPI host
+ * Coprocessor
+ * Graphics
+ * Video capture
+ * Encoding compression engine
+ * Security features
+
+Boot options
+------------
+
+The Nuvoton machines can boot from an OpenBMC firmware image, or directly into
+a kernel using the ``-kernel`` option. OpenBMC images for `quanta-gsj` and
+possibly others can be downloaded from the OpenPOWER jenkins :
+
+ https://openpower.xyz/
+
+The firmware image should be attached as an MTD drive. Example :
+
+.. code-block:: bash
+
+ $ qemu-system-arm -machine quanta-gsj -nographic \
+ -drive file=image-bmc,if=mtd,bus=0,unit=0,format=raw
+
+The default root password for test images is usually ``0penBmc``.
diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
index afdb37e7384..fdcf25c2375 100644
--- a/docs/system/target-arm.rst
+++ b/docs/system/target-arm.rst
@@ -86,6 +86,7 @@ undocumented; you can get a complete list by running
arm/musicpal
arm/gumstix
arm/nseries
+ arm/nuvoton
arm/orangepi
arm/palm
arm/xscale
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (30 preceding siblings ...)
2020-09-14 14:06 ` [PULL 31/36] docs/system: Add Nuvoton machine documentation Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-18 13:52 ` Philippe Mathieu-Daudé
2020-09-14 14:06 ` [PULL 33/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller Peter Maydell
` (3 subsequent siblings)
35 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Havard Skinnemoen <hskinnemoen@google.com>
This adds two acceptance tests for the quanta-gsj machine.
One test downloads a lightly patched openbmc flash image from github and
verifies that it boots all the way to the login prompt.
The other test downloads a kernel, initrd and dtb built from the same
openbmc source and verifies that the kernel detects all CPUs and boots
to the point where it can't find the root filesystem (because we have no
flash image in this case).
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-15-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/acceptance/boot_linux_console.py | 83 ++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/tests/acceptance/boot_linux_console.py b/tests/acceptance/boot_linux_console.py
index aaa781a5813..4a366ce93e4 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -568,6 +568,89 @@ class BootLinuxConsole(LinuxKernelTest):
'sda')
# cubieboard's reboot is not functioning; omit reboot test.
+ def test_arm_quanta_gsj(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=machine:quanta-gsj
+ """
+ # 25 MiB compressed, 32 MiB uncompressed.
+ image_url = (
+ 'https://github.com/hskinnemoen/openbmc/releases/download/'
+ '20200711-gsj-qemu-0/obmc-phosphor-image-gsj.static.mtd.gz')
+ image_hash = '14895e634923345cb5c8776037ff7876df96f6b1'
+ image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash)
+ image_name = 'obmc.mtd'
+ image_path = os.path.join(self.workdir, image_name)
+ archive.gzip_uncompress(image_path_gz, image_path)
+
+ self.vm.set_console()
+ drive_args = 'file=' + image_path + ',if=mtd,bus=0,unit=0'
+ self.vm.add_args('-drive', drive_args)
+ self.vm.launch()
+
+ # Disable drivers and services that stall for a long time during boot,
+ # to avoid running past the 90-second timeout. These may be removed
+ # as the corresponding device support is added.
+ kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + (
+ 'console=${console} '
+ 'mem=${mem} '
+ 'initcall_blacklist=npcm_i2c_bus_driver_init '
+ 'systemd.mask=systemd-random-seed.service '
+ 'systemd.mask=dropbearkey.service '
+ )
+
+ self.wait_for_console_pattern('> BootBlock by Nuvoton')
+ self.wait_for_console_pattern('>Device: Poleg BMC NPCM730')
+ self.wait_for_console_pattern('>Skip DDR init.')
+ self.wait_for_console_pattern('U-Boot ')
+ interrupt_interactive_console_until_pattern(
+ self, 'Hit any key to stop autoboot:', 'U-Boot>')
+ exec_command_and_wait_for_pattern(
+ self, "setenv bootargs ${bootargs} " + kernel_command_line,
+ 'U-Boot>')
+ exec_command_and_wait_for_pattern(
+ self, 'run romboot', 'Booting Kernel from flash')
+ self.wait_for_console_pattern('Booting Linux on physical CPU 0x0')
+ self.wait_for_console_pattern('CPU1: thread -1, cpu 1, socket 0')
+ self.wait_for_console_pattern('OpenBMC Project Reference Distro')
+ self.wait_for_console_pattern('gsj login:')
+
+ def test_arm_quanta_gsj_initrd(self):
+ """
+ :avocado: tags=arch:arm
+ :avocado: tags=machine:quanta-gsj
+ """
+ initrd_url = (
+ 'https://github.com/hskinnemoen/openbmc/releases/download/'
+ '20200711-gsj-qemu-0/obmc-phosphor-initramfs-gsj.cpio.xz')
+ initrd_hash = '98fefe5d7e56727b1eb17d5c00311b1b5c945300'
+ initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
+ kernel_url = (
+ 'https://github.com/hskinnemoen/openbmc/releases/download/'
+ '20200711-gsj-qemu-0/uImage-gsj.bin')
+ kernel_hash = 'fa67b2f141d56d39b3c54305c0e8a899c99eb2c7'
+ kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
+ dtb_url = (
+ 'https://github.com/hskinnemoen/openbmc/releases/download/'
+ '20200711-gsj-qemu-0/nuvoton-npcm730-gsj.dtb')
+ dtb_hash = '18315f7006d7b688d8312d5c727eecd819aa36a4'
+ dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
+
+ self.vm.set_console()
+ kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+ 'console=ttyS0,115200n8 '
+ 'earlycon=uart8250,mmio32,0xf0001000')
+ self.vm.add_args('-kernel', kernel_path,
+ '-initrd', initrd_path,
+ '-dtb', dtb_path,
+ '-append', kernel_command_line)
+ self.vm.launch()
+
+ self.wait_for_console_pattern('Booting Linux on physical CPU 0x0')
+ self.wait_for_console_pattern('CPU1: thread -1, cpu 1, socket 0')
+ self.wait_for_console_pattern(
+ 'Give root password for system maintenance')
+
def test_arm_orangepi(self):
"""
:avocado: tags=arch:arm
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 33/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (31 preceding siblings ...)
2020-09-14 14:06 ` [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 34/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers Peter Maydell
` (2 subsequent siblings)
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.
Example for using single CAN:
-object can-bus,id=canbus0 \
-machine xlnx-zcu102.canbus0=canbus0 \
-object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0
Example for connecting both CAN to same virtual CAN on host machine:
-object can-bus,id=canbus0 -object can-bus,id=canbus1 \
-machine xlnx-zcu102.canbus0=canbus0 \
-machine xlnx-zcu102.canbus1=canbus1 \
-object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
-object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1
To create virtual CAN on the host machine, please check the QEMU CAN docs:
https://github.com/qemu/qemu/blob/master/docs/can.txt
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1597278668-339715-2-git-send-email-fnu.vikram@xilinx.com
[PMM: updated to meson build system]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/net/xlnx-zynqmp-can.h | 78 ++
hw/net/can/xlnx-zynqmp-can.c | 1165 ++++++++++++++++++++++++++++++
hw/net/can/meson.build | 1 +
3 files changed, 1244 insertions(+)
create mode 100644 include/hw/net/xlnx-zynqmp-can.h
create mode 100644 hw/net/can/xlnx-zynqmp-can.c
diff --git a/include/hw/net/xlnx-zynqmp-can.h b/include/hw/net/xlnx-zynqmp-can.h
new file mode 100644
index 00000000000..eb1558708bb
--- /dev/null
+++ b/include/hw/net/xlnx-zynqmp-can.h
@@ -0,0 +1,78 @@
+/*
+ * QEMU model of the Xilinx ZynqMP CAN controller.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and
+ * Pavel Pisa.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef XLNX_ZYNQMP_CAN_H
+#define XLNX_ZYNQMP_CAN_H
+
+#include "hw/register.h"
+#include "net/can_emu.h"
+#include "net/can_host.h"
+#include "qemu/fifo32.h"
+#include "hw/ptimer.h"
+#include "hw/qdev-clock.h"
+
+#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can"
+
+#define XLNX_ZYNQMP_CAN(obj) \
+ OBJECT_CHECK(XlnxZynqMPCANState, (obj), TYPE_XLNX_ZYNQMP_CAN)
+
+#define MAX_CAN_CTRLS 2
+#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4)
+#define MAILBOX_CAPACITY 64
+#define CAN_TIMER_MAX 0XFFFFUL
+#define CAN_DEFAULT_CLOCK (24 * 1000 * 1000)
+
+/* Each CAN_FRAME will have 4 * 32bit size. */
+#define CAN_FRAME_SIZE 4
+#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE)
+
+typedef struct XlnxZynqMPCANState {
+ SysBusDevice parent_obj;
+ MemoryRegion iomem;
+
+ qemu_irq irq;
+
+ CanBusClientState bus_client;
+ CanBusState *canbus;
+
+ struct {
+ uint32_t ext_clk_freq;
+ } cfg;
+
+ RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX];
+ uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX];
+
+ Fifo32 rx_fifo;
+ Fifo32 tx_fifo;
+ Fifo32 txhpb_fifo;
+
+ ptimer_state *can_timer;
+} XlnxZynqMPCANState;
+
+#endif
diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c
new file mode 100644
index 00000000000..367230c88ba
--- /dev/null
+++ b/hw/net/can/xlnx-zynqmp-can.c
@@ -0,0 +1,1165 @@
+/*
+ * QEMU model of the Xilinx ZynqMP CAN controller.
+ * This implementation is based on the following datasheet:
+ * https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Based on QEMU CAN Device emulation implemented by Jin Yang, Deniz Eren and
+ * Pavel Pisa
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/sysbus.h"
+#include "hw/register.h"
+#include "hw/irq.h"
+#include "qapi/error.h"
+#include "qemu/bitops.h"
+#include "qemu/log.h"
+#include "qemu/cutils.h"
+#include "sysemu/sysemu.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
+#include "net/can_emu.h"
+#include "net/can_host.h"
+#include "qemu/event_notifier.h"
+#include "qom/object_interfaces.h"
+#include "hw/net/xlnx-zynqmp-can.h"
+
+#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG
+#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0
+#endif
+
+#define DB_PRINT(dev, ...) do { \
+ if (XLNX_ZYNQMP_CAN_ERR_DEBUG) { \
+ g_autofree char *path = object_get_canonical_path(OBJECT(dev)); \
+ qemu_log("%s: %s", path, ## __VA_ARGS__); \
+ } \
+} while (0)
+
+#define MAX_DLC 8
+#undef ERROR
+
+REG32(SOFTWARE_RESET_REGISTER, 0x0)
+ FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1)
+ FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1)
+REG32(MODE_SELECT_REGISTER, 0x4)
+ FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1)
+ FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1)
+ FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1)
+REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8)
+ FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP, 0, 8)
+REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3)
+ FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4)
+REG32(ERROR_COUNTER_REGISTER, 0x10)
+ FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8)
+ FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8)
+REG32(ERROR_STATUS_REGISTER, 0x14)
+ FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1)
+ FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1)
+ FIELD(ERROR_STATUS_REGISTER, STER, 2, 1)
+ FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1)
+ FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1)
+REG32(STATUS_REGISTER, 0x18)
+ FIELD(STATUS_REGISTER, SNOOP, 12, 1)
+ FIELD(STATUS_REGISTER, ACFBSY, 11, 1)
+ FIELD(STATUS_REGISTER, TXFLL, 10, 1)
+ FIELD(STATUS_REGISTER, TXBFLL, 9, 1)
+ FIELD(STATUS_REGISTER, ESTAT, 7, 2)
+ FIELD(STATUS_REGISTER, ERRWRN, 6, 1)
+ FIELD(STATUS_REGISTER, BBSY, 5, 1)
+ FIELD(STATUS_REGISTER, BIDLE, 4, 1)
+ FIELD(STATUS_REGISTER, NORMAL, 3, 1)
+ FIELD(STATUS_REGISTER, SLEEP, 2, 1)
+ FIELD(STATUS_REGISTER, LBACK, 1, 1)
+ FIELD(STATUS_REGISTER, CONFIG, 0, 1)
+REG32(INTERRUPT_STATUS_REGISTER, 0x1c)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1)
+ FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1)
+REG32(INTERRUPT_ENABLE_REGISTER, 0x20)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1)
+ FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1)
+REG32(INTERRUPT_CLEAR_REGISTER, 0x24)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1)
+ FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1)
+REG32(TIMESTAMP_REGISTER, 0x28)
+ FIELD(TIMESTAMP_REGISTER, CTS, 0, 1)
+REG32(WIR, 0x2c)
+ FIELD(WIR, EW, 8, 8)
+ FIELD(WIR, FW, 0, 8)
+REG32(TXFIFO_ID, 0x30)
+ FIELD(TXFIFO_ID, IDH, 21, 11)
+ FIELD(TXFIFO_ID, SRRRTR, 20, 1)
+ FIELD(TXFIFO_ID, IDE, 19, 1)
+ FIELD(TXFIFO_ID, IDL, 1, 18)
+ FIELD(TXFIFO_ID, RTR, 0, 1)
+REG32(TXFIFO_DLC, 0x34)
+ FIELD(TXFIFO_DLC, DLC, 28, 4)
+REG32(TXFIFO_DATA1, 0x38)
+ FIELD(TXFIFO_DATA1, DB0, 24, 8)
+ FIELD(TXFIFO_DATA1, DB1, 16, 8)
+ FIELD(TXFIFO_DATA1, DB2, 8, 8)
+ FIELD(TXFIFO_DATA1, DB3, 0, 8)
+REG32(TXFIFO_DATA2, 0x3c)
+ FIELD(TXFIFO_DATA2, DB4, 24, 8)
+ FIELD(TXFIFO_DATA2, DB5, 16, 8)
+ FIELD(TXFIFO_DATA2, DB6, 8, 8)
+ FIELD(TXFIFO_DATA2, DB7, 0, 8)
+REG32(TXHPB_ID, 0x40)
+ FIELD(TXHPB_ID, IDH, 21, 11)
+ FIELD(TXHPB_ID, SRRRTR, 20, 1)
+ FIELD(TXHPB_ID, IDE, 19, 1)
+ FIELD(TXHPB_ID, IDL, 1, 18)
+ FIELD(TXHPB_ID, RTR, 0, 1)
+REG32(TXHPB_DLC, 0x44)
+ FIELD(TXHPB_DLC, DLC, 28, 4)
+REG32(TXHPB_DATA1, 0x48)
+ FIELD(TXHPB_DATA1, DB0, 24, 8)
+ FIELD(TXHPB_DATA1, DB1, 16, 8)
+ FIELD(TXHPB_DATA1, DB2, 8, 8)
+ FIELD(TXHPB_DATA1, DB3, 0, 8)
+REG32(TXHPB_DATA2, 0x4c)
+ FIELD(TXHPB_DATA2, DB4, 24, 8)
+ FIELD(TXHPB_DATA2, DB5, 16, 8)
+ FIELD(TXHPB_DATA2, DB6, 8, 8)
+ FIELD(TXHPB_DATA2, DB7, 0, 8)
+REG32(RXFIFO_ID, 0x50)
+ FIELD(RXFIFO_ID, IDH, 21, 11)
+ FIELD(RXFIFO_ID, SRRRTR, 20, 1)
+ FIELD(RXFIFO_ID, IDE, 19, 1)
+ FIELD(RXFIFO_ID, IDL, 1, 18)
+ FIELD(RXFIFO_ID, RTR, 0, 1)
+REG32(RXFIFO_DLC, 0x54)
+ FIELD(RXFIFO_DLC, DLC, 28, 4)
+ FIELD(RXFIFO_DLC, RXT, 0, 16)
+REG32(RXFIFO_DATA1, 0x58)
+ FIELD(RXFIFO_DATA1, DB0, 24, 8)
+ FIELD(RXFIFO_DATA1, DB1, 16, 8)
+ FIELD(RXFIFO_DATA1, DB2, 8, 8)
+ FIELD(RXFIFO_DATA1, DB3, 0, 8)
+REG32(RXFIFO_DATA2, 0x5c)
+ FIELD(RXFIFO_DATA2, DB4, 24, 8)
+ FIELD(RXFIFO_DATA2, DB5, 16, 8)
+ FIELD(RXFIFO_DATA2, DB6, 8, 8)
+ FIELD(RXFIFO_DATA2, DB7, 0, 8)
+REG32(AFR, 0x60)
+ FIELD(AFR, UAF4, 3, 1)
+ FIELD(AFR, UAF3, 2, 1)
+ FIELD(AFR, UAF2, 1, 1)
+ FIELD(AFR, UAF1, 0, 1)
+REG32(AFMR1, 0x64)
+ FIELD(AFMR1, AMIDH, 21, 11)
+ FIELD(AFMR1, AMSRR, 20, 1)
+ FIELD(AFMR1, AMIDE, 19, 1)
+ FIELD(AFMR1, AMIDL, 1, 18)
+ FIELD(AFMR1, AMRTR, 0, 1)
+REG32(AFIR1, 0x68)
+ FIELD(AFIR1, AIIDH, 21, 11)
+ FIELD(AFIR1, AISRR, 20, 1)
+ FIELD(AFIR1, AIIDE, 19, 1)
+ FIELD(AFIR1, AIIDL, 1, 18)
+ FIELD(AFIR1, AIRTR, 0, 1)
+REG32(AFMR2, 0x6c)
+ FIELD(AFMR2, AMIDH, 21, 11)
+ FIELD(AFMR2, AMSRR, 20, 1)
+ FIELD(AFMR2, AMIDE, 19, 1)
+ FIELD(AFMR2, AMIDL, 1, 18)
+ FIELD(AFMR2, AMRTR, 0, 1)
+REG32(AFIR2, 0x70)
+ FIELD(AFIR2, AIIDH, 21, 11)
+ FIELD(AFIR2, AISRR, 20, 1)
+ FIELD(AFIR2, AIIDE, 19, 1)
+ FIELD(AFIR2, AIIDL, 1, 18)
+ FIELD(AFIR2, AIRTR, 0, 1)
+REG32(AFMR3, 0x74)
+ FIELD(AFMR3, AMIDH, 21, 11)
+ FIELD(AFMR3, AMSRR, 20, 1)
+ FIELD(AFMR3, AMIDE, 19, 1)
+ FIELD(AFMR3, AMIDL, 1, 18)
+ FIELD(AFMR3, AMRTR, 0, 1)
+REG32(AFIR3, 0x78)
+ FIELD(AFIR3, AIIDH, 21, 11)
+ FIELD(AFIR3, AISRR, 20, 1)
+ FIELD(AFIR3, AIIDE, 19, 1)
+ FIELD(AFIR3, AIIDL, 1, 18)
+ FIELD(AFIR3, AIRTR, 0, 1)
+REG32(AFMR4, 0x7c)
+ FIELD(AFMR4, AMIDH, 21, 11)
+ FIELD(AFMR4, AMSRR, 20, 1)
+ FIELD(AFMR4, AMIDE, 19, 1)
+ FIELD(AFMR4, AMIDL, 1, 18)
+ FIELD(AFMR4, AMRTR, 0, 1)
+REG32(AFIR4, 0x80)
+ FIELD(AFIR4, AIIDH, 21, 11)
+ FIELD(AFIR4, AISRR, 20, 1)
+ FIELD(AFIR4, AIIDE, 19, 1)
+ FIELD(AFIR4, AIIDL, 1, 18)
+ FIELD(AFIR4, AIRTR, 0, 1)
+
+static void can_update_irq(XlnxZynqMPCANState *s)
+{
+ uint32_t irq;
+
+ /* Watermark register interrupts. */
+ if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) >
+ ARRAY_FIELD_EX32(s->regs, WIR, EW)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFWMEMP, 1);
+ }
+
+ if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) >
+ ARRAY_FIELD_EX32(s->regs, WIR, FW)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXFWMFLL, 1);
+ }
+
+ /* RX Interrupts. */
+ if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXNEMP, 1);
+ }
+
+ /* TX interrupts. */
+ if (fifo32_is_empty(&s->tx_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFEMP, 1);
+ }
+
+ if (fifo32_is_full(&s->tx_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL, 1);
+ }
+
+ if (fifo32_is_full(&s->txhpb_fifo)) {
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL, 1);
+ }
+
+ irq = s->regs[R_INTERRUPT_STATUS_REGISTER];
+ irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER];
+
+ qemu_set_irq(s->irq, irq);
+}
+
+static void can_ier_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+
+ can_update_irq(s);
+}
+
+static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val;
+ can_update_irq(s);
+
+ return 0;
+}
+
+static void can_config_reset(XlnxZynqMPCANState *s)
+{
+ /* Reset all the configuration registers. */
+ register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]);
+ register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]);
+ register_reset(
+ &s->reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]);
+ register_reset(&s->reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]);
+ register_reset(&s->reg_info[R_STATUS_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]);
+ register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]);
+ register_reset(&s->reg_info[R_WIR]);
+}
+
+static void can_config_mode(XlnxZynqMPCANState *s)
+{
+ register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]);
+ register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]);
+
+ /* Put XlnxZynqMPCAN in configuration mode. */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST, 0);
+
+ can_update_irq(s);
+}
+
+static void update_status_register_mode_bits(XlnxZynqMPCANState *s)
+{
+ bool sleep_status = ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP);
+ bool sleep_mode = ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP);
+ /* Wake up interrupt bit. */
+ bool wakeup_irq_val = sleep_status && (sleep_mode == 0);
+ /* Sleep interrupt bit. */
+ bool sleep_irq_val = sleep_mode && (sleep_status == 0);
+
+ /* Clear previous core mode status bits. */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0);
+
+ /* set current mode bit and generate irqs accordingly. */
+ if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1);
+ } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1);
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP,
+ sleep_irq_val);
+ } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SNOOP)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1);
+ } else {
+ /*
+ * If all bits are zero then XlnxZynqMPCAN is set in normal mode.
+ */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1);
+ /* Set wakeup interrupt bit. */
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP,
+ wakeup_irq_val);
+ }
+
+ can_update_irq(s);
+}
+
+static void can_exit_sleep_mode(XlnxZynqMPCANState *s)
+{
+ ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0);
+ update_status_register_mode_bits(s);
+}
+
+static void generate_frame(qemu_can_frame *frame, uint32_t *data)
+{
+ frame->can_id = data[0];
+ frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC);
+
+ frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3);
+ frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2);
+ frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1);
+ frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0);
+
+ frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7);
+ frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6);
+ frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5);
+ frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4);
+}
+
+static bool tx_ready_check(XlnxZynqMPCANState *s)
+{
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer data while"
+ " data while controller is in reset mode.\n",
+ path);
+ return false;
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer"
+ " data while controller is in configuration mode. Reset"
+ " the core so operations can start fresh.\n",
+ path);
+ return false;
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to transfer"
+ " data while controller is in SNOOP MODE.\n",
+ path);
+ return false;
+ }
+
+ return true;
+}
+
+static void transfer_fifo(XlnxZynqMPCANState *s, Fifo32 *fifo)
+{
+ qemu_can_frame frame;
+ uint32_t data[CAN_FRAME_SIZE];
+ int i;
+ bool can_tx = tx_ready_check(s);
+
+ if (can_tx) {
+ while (!fifo32_is_empty(fifo)) {
+ for (i = 0; i < CAN_FRAME_SIZE; i++) {
+ data[i] = fifo32_pop(fifo);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
+ /*
+ * Controller is in loopback. In Loopback mode, the CAN core
+ * transmits a recessive bitstream on to the XlnxZynqMPCAN Bus.
+ * Any message transmitted is looped back to the RX line and
+ * acknowledged. The XlnxZynqMPCAN core receives any message
+ * that it transmits.
+ */
+ if (fifo32_is_full(&s->rx_fifo)) {
+ DB_PRINT(s, "Loopback: RX FIFO is full."
+ " TX FIFO will be flushed.\n");
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
+ RXOFLW, 1);
+ } else {
+ for (i = 0; i < CAN_FRAME_SIZE; i++) {
+ fifo32_push(&s->rx_fifo, data[i]);
+ }
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
+ RXOK, 1);
+ }
+ } else {
+ /* Normal mode Tx. */
+ generate_frame(&frame, data);
+
+ can_bus_client_send(&s->bus_client, &frame, 1);
+ }
+ }
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 1);
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0);
+
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) {
+ can_exit_sleep_mode(s);
+ }
+ } else {
+ DB_PRINT(s, "Not enabled for data transfer.\n");
+ }
+
+ can_update_irq(s);
+}
+
+static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN,
+ FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN));
+
+ if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) {
+ DB_PRINT(s, "Resetting controller.\n");
+
+ /* First, core will do software reset then will enter in config mode. */
+ can_config_reset(s);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ can_config_mode(s);
+ } else {
+ /*
+ * Leave config mode. Now XlnxZynqMPCAN core will enter normal,
+ * sleep, snoop or loopback mode depending upon LBACK, SLEEP, SNOOP
+ * register states.
+ */
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0);
+
+ ptimer_transaction_begin(s->can_timer);
+ ptimer_set_count(s->can_timer, 0);
+ ptimer_transaction_commit(s->can_timer);
+
+ /* XlnxZynqMPCAN is out of config mode. It will send pending data. */
+ transfer_fifo(s, &s->txhpb_fifo);
+ transfer_fifo(s, &s->tx_fifo);
+ }
+
+ update_status_register_mode_bits(s);
+
+ return s->regs[R_SOFTWARE_RESET_REGISTER];
+}
+
+static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+ uint8_t multi_mode;
+
+ /*
+ * Multiple mode set check. This is done to make sure user doesn't set
+ * multiple modes.
+ */
+ multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) +
+ FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) +
+ FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP);
+
+ if (multi_mode > 1) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to config"
+ " several modes simultaneously. One mode will be selected"
+ " according to their priority: LBACK > SLEEP > SNOOP.\n",
+ path);
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) == 0) {
+ /* We are in configuration mode, any mode can be selected. */
+ s->regs[R_MODE_SELECT_REGISTER] = val;
+ } else {
+ bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP);
+
+ ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, sleep_mode_bit);
+
+ if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set"
+ " LBACK mode without setting CEN bit as 0.\n",
+ path);
+ } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Attempting to set"
+ " SNOOP mode without setting CEN bit as 0.\n",
+ path);
+ }
+
+ update_status_register_mode_bits(s);
+ }
+
+ return s->regs[R_MODE_SELECT_REGISTER];
+}
+
+static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ /* Only allow writes when in config mode. */
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ val = s->regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER];
+ }
+
+ return val;
+}
+
+static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ /* Only allow writes when in config mode. */
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ val = s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER];
+ }
+
+ return val;
+}
+
+static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) {
+ ptimer_transaction_begin(s->can_timer);
+ ptimer_set_count(s->can_timer, 0);
+ ptimer_transaction_commit(s->can_timer);
+ }
+
+ return 0;
+}
+
+static void update_rx_fifo(XlnxZynqMPCANState *s, const qemu_can_frame *frame)
+{
+ bool filter_pass = false;
+ uint16_t timestamp = 0;
+
+ /* If no filter is enabled. Message will be stored in FIFO. */
+ if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) |
+ (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) {
+ filter_pass = true;
+ }
+
+ /*
+ * Messages that pass any of the acceptance filters will be stored in
+ * the RX FIFO.
+ */
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) {
+ uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) {
+ uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) {
+ uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
+ uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id;
+ uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4];
+
+ if (filter_id_masked == id_masked) {
+ filter_pass = true;
+ }
+ }
+
+ /* Store the message in fifo if it passed through any of the filters. */
+ if (filter_pass && frame->can_dlc <= MAX_DLC) {
+
+ if (fifo32_is_full(&s->rx_fifo)) {
+ DB_PRINT(s, "RX FIFO is full.\n");
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW, 1);
+ } else {
+ timestamp = CAN_TIMER_MAX - ptimer_get_count(s->can_timer);
+
+ fifo32_push(&s->rx_fifo, frame->can_id);
+
+ fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DLC_DLC_SHIFT,
+ R_RXFIFO_DLC_DLC_LENGTH,
+ frame->can_dlc) |
+ deposit32(0, R_RXFIFO_DLC_RXT_SHIFT,
+ R_RXFIFO_DLC_RXT_LENGTH,
+ timestamp));
+
+ /* First 32 bit of the data. */
+ fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA1_DB3_SHIFT,
+ R_TXFIFO_DATA1_DB3_LENGTH,
+ frame->data[0]) |
+ deposit32(0, R_TXFIFO_DATA1_DB2_SHIFT,
+ R_TXFIFO_DATA1_DB2_LENGTH,
+ frame->data[1]) |
+ deposit32(0, R_TXFIFO_DATA1_DB1_SHIFT,
+ R_TXFIFO_DATA1_DB1_LENGTH,
+ frame->data[2]) |
+ deposit32(0, R_TXFIFO_DATA1_DB0_SHIFT,
+ R_TXFIFO_DATA1_DB0_LENGTH,
+ frame->data[3]));
+ /* Last 32 bit of the data. */
+ fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA2_DB7_SHIFT,
+ R_TXFIFO_DATA2_DB7_LENGTH,
+ frame->data[4]) |
+ deposit32(0, R_TXFIFO_DATA2_DB6_SHIFT,
+ R_TXFIFO_DATA2_DB6_LENGTH,
+ frame->data[5]) |
+ deposit32(0, R_TXFIFO_DATA2_DB5_SHIFT,
+ R_TXFIFO_DATA2_DB5_LENGTH,
+ frame->data[6]) |
+ deposit32(0, R_TXFIFO_DATA2_DB4_SHIFT,
+ R_TXFIFO_DATA2_DB4_LENGTH,
+ frame->data[7]));
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1);
+ }
+
+ can_update_irq(s);
+ } else {
+ DB_PRINT(s, "Message didn't pass through any filter or dlc"
+ " is not in range.\n");
+ }
+}
+
+static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t r = 0;
+
+ if (!fifo32_is_empty(&s->rx_fifo)) {
+ r = fifo32_pop(&s->rx_fifo);
+ } else {
+ DB_PRINT(s, "No message in RXFIFO.\n");
+
+ ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXUFLW, 1);
+ }
+
+ can_update_irq(s);
+ return r;
+}
+
+static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+
+ if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF2) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF3) &&
+ ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1);
+ } else {
+ ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0);
+ }
+}
+
+static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t reg_idx = (reg->access->addr) / 4;
+ uint32_t val = val64;
+ uint32_t filter_number = (reg_idx - R_AFMR1) / 2;
+
+ /* modify an acceptance filter, the corresponding UAF bit should be '0.' */
+ if (!(s->regs[R_AFR] & (1 << filter_number))) {
+ s->regs[reg_idx] = val;
+ } else {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d"
+ " mask is not set as corresponding UAF bit is not 0.\n",
+ path, filter_number + 1);
+ }
+
+ return s->regs[reg_idx];
+}
+
+static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t reg_idx = (reg->access->addr) / 4;
+ uint32_t val = val64;
+ uint32_t filter_number = (reg_idx - R_AFIR1) / 2;
+
+ if (!(s->regs[R_AFR] & (1 << filter_number))) {
+ s->regs[reg_idx] = val;
+ } else {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Acceptance filter %d"
+ " id is not set as corresponding UAF bit is not 0.\n",
+ path, filter_number + 1);
+ }
+
+ return s->regs[reg_idx];
+}
+
+static void can_tx_post_write(RegisterInfo *reg, uint64_t val64)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
+ uint32_t val = val64;
+
+ bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2;
+
+ bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) ||
+ (reg->access->addr == A_TXHPB_DATA2);
+
+ Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo;
+
+ DB_PRINT(s, "TX FIFO write.\n");
+
+ if (!fifo32_is_full(f)) {
+ fifo32_push(f, val);
+ } else {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: TX FIFO is full.\n", path);
+ }
+
+ /* Initiate the message send if TX register is written. */
+ if (initiate_transfer &&
+ ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
+ transfer_fifo(s, f);
+ }
+
+ can_update_irq(s);
+}
+
+static const RegisterAccessInfo can_regs_info[] = {
+ { .name = "SOFTWARE_RESET_REGISTER",
+ .addr = A_SOFTWARE_RESET_REGISTER,
+ .rsvd = 0xfffffffc,
+ .pre_write = can_srr_pre_write,
+ },{ .name = "MODE_SELECT_REGISTER",
+ .addr = A_MODE_SELECT_REGISTER,
+ .rsvd = 0xfffffff8,
+ .pre_write = can_msr_pre_write,
+ },{ .name = "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER",
+ .addr = A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER,
+ .rsvd = 0xffffff00,
+ .pre_write = can_brpr_pre_write,
+ },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER",
+ .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER,
+ .rsvd = 0xfffffe00,
+ .pre_write = can_btr_pre_write,
+ },{ .name = "ERROR_COUNTER_REGISTER",
+ .addr = A_ERROR_COUNTER_REGISTER,
+ .rsvd = 0xffff0000,
+ .ro = 0xffffffff,
+ },{ .name = "ERROR_STATUS_REGISTER",
+ .addr = A_ERROR_STATUS_REGISTER,
+ .rsvd = 0xffffffe0,
+ .w1c = 0x1f,
+ },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER,
+ .reset = 0x1,
+ .rsvd = 0xffffe000,
+ .ro = 0x1fff,
+ },{ .name = "INTERRUPT_STATUS_REGISTER",
+ .addr = A_INTERRUPT_STATUS_REGISTER,
+ .reset = 0x6000,
+ .rsvd = 0xffff8000,
+ .ro = 0x7fff,
+ },{ .name = "INTERRUPT_ENABLE_REGISTER",
+ .addr = A_INTERRUPT_ENABLE_REGISTER,
+ .rsvd = 0xffff8000,
+ .post_write = can_ier_post_write,
+ },{ .name = "INTERRUPT_CLEAR_REGISTER",
+ .addr = A_INTERRUPT_CLEAR_REGISTER,
+ .rsvd = 0xffff8000,
+ .pre_write = can_icr_pre_write,
+ },{ .name = "TIMESTAMP_REGISTER",
+ .addr = A_TIMESTAMP_REGISTER,
+ .rsvd = 0xfffffffe,
+ .pre_write = can_tcr_pre_write,
+ },{ .name = "WIR", .addr = A_WIR,
+ .reset = 0x3f3f,
+ .rsvd = 0xffff0000,
+ },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC,
+ .rsvd = 0xfffffff,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC,
+ .rsvd = 0xfffffff,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1,
+ .post_write = can_tx_post_write,
+ },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2,
+ .post_write = can_tx_post_write,
+ },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID,
+ .ro = 0xffffffff,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC,
+ .rsvd = 0xfff0000,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2,
+ .post_read = can_rxfifo_pre_read,
+ },{ .name = "AFR", .addr = A_AFR,
+ .rsvd = 0xfffffff0,
+ .post_write = can_filter_enable_post_write,
+ },{ .name = "AFMR1", .addr = A_AFMR1,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR1", .addr = A_AFIR1,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR2", .addr = A_AFMR2,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR2", .addr = A_AFIR2,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR3", .addr = A_AFMR3,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR3", .addr = A_AFIR3,
+ .pre_write = can_filter_id_pre_write,
+ },{ .name = "AFMR4", .addr = A_AFMR4,
+ .pre_write = can_filter_mask_pre_write,
+ },{ .name = "AFIR4", .addr = A_AFIR4,
+ .pre_write = can_filter_id_pre_write,
+ }
+};
+
+static void xlnx_zynqmp_can_ptimer_cb(void *opaque)
+{
+ /* No action required on the timer rollover. */
+}
+
+static const MemoryRegionOps can_ops = {
+ .read = register_read_memory,
+ .write = register_write_memory,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+};
+
+static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
+ unsigned int i;
+
+ for (i = R_RXFIFO_ID; i < ARRAY_SIZE(s->reg_info); ++i) {
+ register_reset(&s->reg_info[i]);
+ }
+
+ ptimer_transaction_begin(s->can_timer);
+ ptimer_set_count(s->can_timer, 0);
+ ptimer_transaction_commit(s->can_timer);
+}
+
+static void xlnx_zynqmp_can_reset_hold(Object *obj)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
+ unsigned int i;
+
+ for (i = 0; i < R_RXFIFO_ID; ++i) {
+ register_reset(&s->reg_info[i]);
+ }
+
+ /*
+ * Reset FIFOs when CAN model is reset. This will clear the fifo writes
+ * done by post_write which gets called from register_reset function,
+ * post_write handle will not be able to trigger tx because CAN will be
+ * disabled when software_reset_register is cleared first.
+ */
+ fifo32_reset(&s->rx_fifo);
+ fifo32_reset(&s->tx_fifo);
+ fifo32_reset(&s->txhpb_fifo);
+}
+
+static bool xlnx_zynqmp_can_can_receive(CanBusClientState *client)
+{
+ XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
+ bus_client);
+
+ if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
+ DB_PRINT(s, "Controller is in reset.\n");
+ return false;
+ } else if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) == 0) {
+ DB_PRINT(s, "Controller is disabled. Incoming messages"
+ " will be discarded.\n");
+ return false;
+ } else {
+ return true;
+ }
+}
+
+static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client,
+ const qemu_can_frame *buf, size_t buf_size) {
+ XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
+ bus_client);
+ const qemu_can_frame *frame = buf;
+
+ DB_PRINT(s, "Incoming data.\n");
+
+ if (buf_size <= 0) {
+ DB_PRINT(s, "Junk data received.\n");
+ return 0;
+ }
+ if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
+ /*
+ * XlnxZynqMPCAN will not participate in normal bus communication
+ * and will not receive any messages transmitted by other CAN nodes.
+ */
+ DB_PRINT(s, "Controller is in loopback mode. It will not"
+ " receive data.\n");
+
+ } else if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
+ /* Snoop Mode: Just keep the data. no response back. */
+ update_rx_fifo(s, frame);
+ } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) {
+ /*
+ * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it to wake
+ * up state.
+ */
+ can_exit_sleep_mode(s);
+ update_rx_fifo(s, frame);
+ } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0) {
+ update_rx_fifo(s, frame);
+ } else {
+ DB_PRINT(s, "Cannot receive data as controller is not configured"
+ " correctly.\n");
+ }
+
+ return 1;
+}
+
+static CanBusClientInfo can_xilinx_bus_client_info = {
+ .can_receive = xlnx_zynqmp_can_can_receive,
+ .receive = xlnx_zynqmp_can_receive,
+};
+
+static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCANState *s,
+ CanBusState *bus)
+{
+ s->bus_client.info = &can_xilinx_bus_client_info;
+
+ if (can_bus_insert_client(bus, &s->bus_client) < 0) {
+ return -1;
+ }
+ return 0;
+}
+
+static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev);
+
+ if (s->canbus) {
+ if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus) < 0) {
+ g_autofree char *path = object_get_canonical_path(OBJECT(s));
+
+ error_setg(errp, "%s: xlnx_zynqmp_can_connect_to_bus"
+ " failed.", path);
+ return;
+ }
+
+ } else {
+ /* If no bus is set. */
+ DB_PRINT(s, "Canbus property is not set.\n");
+ }
+
+ /* Create RX FIFO, TXFIFO, TXHPB storage. */
+ fifo32_create(&s->rx_fifo, RXFIFO_SIZE);
+ fifo32_create(&s->tx_fifo, RXFIFO_SIZE);
+ fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE);
+
+ /* Allocate a new timer. */
+ s->can_timer = ptimer_init(xlnx_zynqmp_can_ptimer_cb, s,
+ PTIMER_POLICY_DEFAULT);
+
+ ptimer_transaction_begin(s->can_timer);
+
+ ptimer_set_freq(s->can_timer, s->cfg.ext_clk_freq);
+ ptimer_set_limit(s->can_timer, CAN_TIMER_MAX, 1);
+ ptimer_run(s->can_timer, 0);
+ ptimer_transaction_commit(s->can_timer);
+}
+
+static void xlnx_zynqmp_can_init(Object *obj)
+{
+ XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+
+ RegisterInfoArray *reg_array;
+
+ memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN,
+ XLNX_ZYNQMP_CAN_R_MAX * 4);
+ reg_array = register_init_block32(DEVICE(obj), can_regs_info,
+ ARRAY_SIZE(can_regs_info),
+ s->reg_info, s->regs,
+ &can_ops,
+ XLNX_ZYNQMP_CAN_ERR_DEBUG,
+ XLNX_ZYNQMP_CAN_R_MAX * 4);
+
+ memory_region_add_subregion(&s->iomem, 0x00, ®_array->mem);
+ sysbus_init_mmio(sbd, &s->iomem);
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+}
+
+static const VMStateDescription vmstate_can = {
+ .name = TYPE_XLNX_ZYNQMP_CAN,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCANState),
+ VMSTATE_FIFO32(tx_fifo, XlnxZynqMPCANState),
+ VMSTATE_FIFO32(txhpb_fifo, XlnxZynqMPCANState),
+ VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCANState, XLNX_ZYNQMP_CAN_R_MAX),
+ VMSTATE_PTIMER(can_timer, XlnxZynqMPCANState),
+ VMSTATE_END_OF_LIST(),
+ }
+};
+
+static Property xlnx_zynqmp_can_properties[] = {
+ DEFINE_PROP_UINT32("ext_clk_freq", XlnxZynqMPCANState, cfg.ext_clk_freq,
+ CAN_DEFAULT_CLOCK),
+ DEFINE_PROP_LINK("canbus", XlnxZynqMPCANState, canbus, TYPE_CAN_BUS,
+ CanBusState *),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ rc->phases.enter = xlnx_zynqmp_can_reset_init;
+ rc->phases.hold = xlnx_zynqmp_can_reset_hold;
+ dc->realize = xlnx_zynqmp_can_realize;
+ device_class_set_props(dc, xlnx_zynqmp_can_properties);
+ dc->vmsd = &vmstate_can;
+}
+
+static const TypeInfo can_info = {
+ .name = TYPE_XLNX_ZYNQMP_CAN,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(XlnxZynqMPCANState),
+ .class_init = xlnx_zynqmp_can_class_init,
+ .instance_init = xlnx_zynqmp_can_init,
+};
+
+static void can_register_types(void)
+{
+ type_register_static(&can_info);
+}
+
+type_init(can_register_types)
diff --git a/hw/net/can/meson.build b/hw/net/can/meson.build
index c9cfeb7954f..efb07cbad1b 100644
--- a/hw/net/can/meson.build
+++ b/hw/net/can/meson.build
@@ -2,3 +2,4 @@ softmmu_ss.add(when: 'CONFIG_CAN_SJA1000', if_true: files('can_sja1000.c'))
softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_kvaser_pci.c'))
softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_pcm3680_pci.c'))
softmmu_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_mioe3680_pci.c'))
+softmmu_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-can.c'))
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 34/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (32 preceding siblings ...)
2020-09-14 14:06 ` [PULL 33/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 35/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller Peter Maydell
2020-09-14 14:06 ` [PULL 36/36] MAINTAINERS: Add maintainer entry " Peter Maydell
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
Connect CAN0 and CAN1 on the ZynqMP.
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1597278668-339715-3-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/arm/xlnx-zynqmp.h | 8 ++++++++
hw/arm/xlnx-zcu102.c | 20 ++++++++++++++++++++
hw/arm/xlnx-zynqmp.c | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 62 insertions(+)
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 4cc97b46109..ae914807be5 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -22,6 +22,7 @@
#include "hw/intc/arm_gic.h"
#include "hw/net/cadence_gem.h"
#include "hw/char/cadence_uart.h"
+#include "hw/net/xlnx-zynqmp-can.h"
#include "hw/ide/ahci.h"
#include "hw/sd/sdhci.h"
#include "hw/ssi/xilinx_spips.h"
@@ -33,6 +34,7 @@
#include "hw/cpu/cluster.h"
#include "target/arm/cpu.h"
#include "qom/object.h"
+#include "net/can_emu.h"
#define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
typedef struct XlnxZynqMPState XlnxZynqMPState;
@@ -43,6 +45,8 @@ DECLARE_INSTANCE_CHECKER(XlnxZynqMPState, XLNX_ZYNQMP,
#define XLNX_ZYNQMP_NUM_RPU_CPUS 2
#define XLNX_ZYNQMP_NUM_GEMS 4
#define XLNX_ZYNQMP_NUM_UARTS 2
+#define XLNX_ZYNQMP_NUM_CAN 2
+#define XLNX_ZYNQMP_CAN_REF_CLK (24 * 1000 * 1000)
#define XLNX_ZYNQMP_NUM_SDHCI 2
#define XLNX_ZYNQMP_NUM_SPIS 2
#define XLNX_ZYNQMP_NUM_GDMA_CH 8
@@ -94,6 +98,7 @@ struct XlnxZynqMPState {
CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
+ XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
SysbusAHCIState sata;
SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI];
XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS];
@@ -114,6 +119,9 @@ struct XlnxZynqMPState {
bool virt;
/* Has the RPU subsystem? */
bool has_rpu;
+
+ /* CAN bus. */
+ CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN];
};
#endif
diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c
index 19d5a4d4e0e..cb0fba7975f 100644
--- a/hw/arm/xlnx-zcu102.c
+++ b/hw/arm/xlnx-zcu102.c
@@ -25,6 +25,7 @@
#include "sysemu/qtest.h"
#include "sysemu/device_tree.h"
#include "qom/object.h"
+#include "net/can_emu.h"
struct XlnxZCU102 {
MachineState parent_obj;
@@ -34,6 +35,8 @@ struct XlnxZCU102 {
bool secure;
bool virt;
+ CanBusState *canbus[XLNX_ZYNQMP_NUM_CAN];
+
struct arm_boot_info binfo;
};
typedef struct XlnxZCU102 XlnxZCU102;
@@ -127,6 +130,14 @@ static void xlnx_zcu102_init(MachineState *machine)
object_property_set_bool(OBJECT(&s->soc), "virtualization", s->virt,
&error_fatal);
+ for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) {
+ gchar *bus_name = g_strdup_printf("canbus%d", i);
+
+ object_property_set_link(OBJECT(&s->soc), bus_name,
+ OBJECT(s->canbus[i]), &error_fatal);
+ g_free(bus_name);
+ }
+
qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
/* Create and plug in the SD cards */
@@ -222,6 +233,15 @@ static void xlnx_zcu102_machine_instance_init(Object *obj)
"Set on/off to enable/disable emulating a "
"guest CPU which implements the ARM "
"Virtualization Extensions");
+ object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS,
+ (Object **)&s->canbus[0],
+ object_property_allow_set_link,
+ 0);
+
+ object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS,
+ (Object **)&s->canbus[1],
+ object_property_allow_set_link,
+ 0);
}
static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data)
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 7885bb17745..881847255b4 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -81,6 +81,14 @@ static const int uart_intr[XLNX_ZYNQMP_NUM_UARTS] = {
21, 22,
};
+static const uint64_t can_addr[XLNX_ZYNQMP_NUM_CAN] = {
+ 0xFF060000, 0xFF070000,
+};
+
+static const int can_intr[XLNX_ZYNQMP_NUM_CAN] = {
+ 23, 24,
+};
+
static const uint64_t sdhci_addr[XLNX_ZYNQMP_NUM_SDHCI] = {
0xFF160000, 0xFF170000,
};
@@ -243,6 +251,11 @@ static void xlnx_zynqmp_init(Object *obj)
TYPE_CADENCE_UART);
}
+ for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) {
+ object_initialize_child(obj, "can[*]", &s->can[i],
+ TYPE_XLNX_ZYNQMP_CAN);
+ }
+
object_initialize_child(obj, "sata", &s->sata, TYPE_SYSBUS_AHCI);
for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) {
@@ -482,6 +495,23 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
gic_spi[uart_intr[i]]);
}
+ for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) {
+ object_property_set_int(OBJECT(&s->can[i]), "ext_clk_freq",
+ XLNX_ZYNQMP_CAN_REF_CLK, &error_abort);
+
+ object_property_set_link(OBJECT(&s->can[i]), "canbus",
+ OBJECT(s->canbus[i]), &error_fatal);
+
+ sysbus_realize(SYS_BUS_DEVICE(&s->can[i]), &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->can[i]), 0, can_addr[i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->can[i]), 0,
+ gic_spi[can_intr[i]]);
+ }
+
object_property_set_int(OBJECT(&s->sata), "num-ports", SATA_NUM_PORTS,
&error_abort);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sata), errp)) {
@@ -619,6 +649,10 @@ static Property xlnx_zynqmp_props[] = {
DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false),
DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION,
MemoryRegion *),
+ DEFINE_PROP_LINK("canbus0", XlnxZynqMPState, canbus[0], TYPE_CAN_BUS,
+ CanBusState *),
+ DEFINE_PROP_LINK("canbus1", XlnxZynqMPState, canbus[1], TYPE_CAN_BUS,
+ CanBusState *),
DEFINE_PROP_END_OF_LIST()
};
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 35/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (33 preceding siblings ...)
2020-09-14 14:06 ` [PULL 34/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
2020-09-14 14:06 ` [PULL 36/36] MAINTAINERS: Add maintainer entry " Peter Maydell
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
The QTests perform five tests on the Xilinx ZynqMP CAN controller:
Tests the CAN controller in loopback, sleep and snoop mode.
Tests filtering of incoming CAN messages.
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1597278668-339715-4-git-send-email-fnu.vikram@xilinx.com
[PMM: updated to meson build system]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/qtest/xlnx-can-test.c | 359 ++++++++++++++++++++++++++++++++++++
tests/qtest/meson.build | 1 +
2 files changed, 360 insertions(+)
create mode 100644 tests/qtest/xlnx-can-test.c
diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c
new file mode 100644
index 00000000000..d04189fa839
--- /dev/null
+++ b/tests/qtest/xlnx-can-test.c
@@ -0,0 +1,359 @@
+/*
+ * QTests for the Xilinx ZynqMP CAN controller.
+ *
+ * Copyright (c) 2020 Xilinx Inc.
+ *
+ * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "libqos/libqtest.h"
+
+/* Base address. */
+#define CAN0_BASE_ADDR 0xFF060000
+#define CAN1_BASE_ADDR 0xFF070000
+
+/* Register addresses. */
+#define R_SRR_OFFSET 0x00
+#define R_MSR_OFFSET 0x04
+#define R_SR_OFFSET 0x18
+#define R_ISR_OFFSET 0x1C
+#define R_ICR_OFFSET 0x24
+#define R_TXID_OFFSET 0x30
+#define R_TXDLC_OFFSET 0x34
+#define R_TXDATA1_OFFSET 0x38
+#define R_TXDATA2_OFFSET 0x3C
+#define R_RXID_OFFSET 0x50
+#define R_RXDLC_OFFSET 0x54
+#define R_RXDATA1_OFFSET 0x58
+#define R_RXDATA2_OFFSET 0x5C
+#define R_AFR 0x60
+#define R_AFMR1 0x64
+#define R_AFIR1 0x68
+#define R_AFMR2 0x6C
+#define R_AFIR2 0x70
+#define R_AFMR3 0x74
+#define R_AFIR3 0x78
+#define R_AFMR4 0x7C
+#define R_AFIR4 0x80
+
+/* CAN modes. */
+#define CONFIG_MODE 0x00
+#define NORMAL_MODE 0x00
+#define LOOPBACK_MODE 0x02
+#define SNOOP_MODE 0x04
+#define SLEEP_MODE 0x01
+#define ENABLE_CAN (1 << 1)
+#define STATUS_NORMAL_MODE (1 << 3)
+#define STATUS_LOOPBACK_MODE (1 << 1)
+#define STATUS_SNOOP_MODE (1 << 12)
+#define STATUS_SLEEP_MODE (1 << 2)
+#define ISR_TXOK (1 << 1)
+#define ISR_RXOK (1 << 4)
+
+static void match_rx_tx_data(uint32_t *buf_tx, uint32_t *buf_rx,
+ uint8_t can_timestamp)
+{
+ uint16_t size = 0;
+ uint8_t len = 4;
+
+ while (size < len) {
+ if (R_RXID_OFFSET + 4 * size == R_RXDLC_OFFSET) {
+ g_assert_cmpint(buf_rx[size], ==, buf_tx[size] + can_timestamp);
+ } else {
+ g_assert_cmpint(buf_rx[size], ==, buf_tx[size]);
+ }
+
+ size++;
+ }
+}
+
+static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx)
+{
+ uint32_t int_status;
+
+ /* Read the interrupt on CAN rx. */
+ int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK;
+
+ g_assert_cmpint(int_status, ==, ISR_RXOK);
+
+ /* Read the RX register data for CAN. */
+ buf_rx[0] = qtest_readl(qts, can_base_addr + R_RXID_OFFSET);
+ buf_rx[1] = qtest_readl(qts, can_base_addr + R_RXDLC_OFFSET);
+ buf_rx[2] = qtest_readl(qts, can_base_addr + R_RXDATA1_OFFSET);
+ buf_rx[3] = qtest_readl(qts, can_base_addr + R_RXDATA2_OFFSET);
+
+ /* Clear the RX interrupt. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK);
+}
+
+static void send_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_tx)
+{
+ uint32_t int_status;
+
+ /* Write the TX register data for CAN. */
+ qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]);
+ qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]);
+ qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]);
+ qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]);
+
+ /* Read the interrupt on CAN for tx. */
+ int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK;
+
+ g_assert_cmpint(int_status, ==, ISR_TXOK);
+
+ /* Clear the interrupt for tx. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK);
+}
+
+/*
+ * This test will be transferring data from CAN0 and CAN1 through canbus. CAN0
+ * initiate the data transfer to can-bus, CAN1 receives the data. Test compares
+ * the data sent from CAN0 with received on CAN1.
+ */
+static void test_can_bus(void)
+{
+ uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 and CAN1. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 and CAN1 are in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/*
+ * This test is performing loopback mode on CAN0 and CAN1. Data sent from TX of
+ * each CAN0 and CAN1 are compared with RX register data for respective CAN.
+ */
+static void test_can_loopback(void)
+{
+ uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 in loopback mode. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ /* Check here if CAN0 is set in loopback mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+
+ g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, 0);
+
+ /* Configure the CAN1 in loopback mode. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ /* Check here if CAN1 is set in loopback mode. */
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+
+ g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, 0);
+
+ qtest_quit(qts);
+}
+
+/*
+ * Enable filters for CAN1. This will filter incoming messages with ID. In this
+ * test message will pass through filter 2.
+ */
+static void test_can_filter(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0 and CAN1. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 and CAN1 are in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ /* Set filter for CAN1 for incoming messages. */
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0x0);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR1, 0xF7);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR1, 0x121F);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR2, 0x5431);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR2, 0x14);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR3, 0x1234);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR3, 0x5431);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR4, 0xFFF);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR4, 0x1234);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0xF);
+
+ send_data(qts, CAN0_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN1_BASE_ADDR, buf_rx);
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/* Testing sleep mode on CAN0 while CAN1 is in normal mode. */
+static void test_can_sleepmode(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 is in SLEEP mode and CAN1 in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_SLEEP_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+
+ /*
+ * Once CAN1 sends data on can-bus. CAN0 should exit sleep mode.
+ * Check the CAN0 status now. It should exit the sleep mode and receive the
+ * incoming data.
+ */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+/* Testing Snoop mode on CAN0 while CAN1 is in normal mode. */
+static void test_can_snoopmode(void)
+{
+ uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
+ uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
+ uint32_t status = 0;
+ uint8_t can_timestamp = 1;
+
+ QTestState *qts = qtest_init("-machine xlnx-zcu102"
+ " -object can-bus,id=canbus0"
+ " -machine xlnx-zcu102.canbus0=canbus0"
+ " -machine xlnx-zcu102.canbus1=canbus0"
+ );
+
+ /* Configure the CAN0. */
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE);
+ qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+
+ qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
+ qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
+
+ /* Check here if CAN0 is in SNOOP mode and CAN1 in normal mode. */
+ status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_SNOOP_MODE);
+
+ status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
+ g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
+
+ send_data(qts, CAN1_BASE_ADDR, buf_tx);
+
+ read_data(qts, CAN0_BASE_ADDR, buf_rx);
+
+ match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
+
+ qtest_quit(qts);
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_func("/net/can/can_bus", test_can_bus);
+ qtest_add_func("/net/can/can_loopback", test_can_loopback);
+ qtest_add_func("/net/can/can_filter", test_can_filter);
+ qtest_add_func("/net/can/can_test_snoopmode", test_can_snoopmode);
+ qtest_add_func("/net/can/can_test_sleepmode", test_can_sleepmode);
+
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index 874b5be62be..945f86c7d59 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -148,6 +148,7 @@ qtests_aarch64 = \
(config_all_devices.has_key('CONFIG_TPM_TIS_SYSBUS') ? ['tpm-tis-device-swtpm-test'] : []) + \
['numa-test',
'boot-serial-test',
+ 'xlnx-can-test',
'migration-test']
qtests_s390x = \
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [PULL 36/36] MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
` (34 preceding siblings ...)
2020-09-14 14:06 ` [PULL 35/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller Peter Maydell
@ 2020-09-14 14:06 ` Peter Maydell
35 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-09-14 14:06 UTC (permalink / raw)
To: qemu-devel
From: Vikram Garhwal <fnu.vikram@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1597278668-339715-5-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d17cad19aa..3ed61d9354d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1557,6 +1557,14 @@ F: hw/net/opencores_eth.c
Devices
-------
+Xilinx CAN
+M: Vikram Garhwal <fnu.vikram@xilinx.com>
+M: Francisco Iglesias <francisco.iglesias@xilinx.com>
+S: Maintained
+F: hw/net/can/xlnx-*
+F: include/hw/net/xlnx-*
+F: tests/qtest/xlnx-can-test*
+
EDU
M: Jiri Slaby <jslaby@suse.cz>
S: Maintained
--
2.20.1
^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj
2020-09-14 14:06 ` [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj Peter Maydell
@ 2020-09-18 13:52 ` Philippe Mathieu-Daudé
2020-09-18 13:56 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 48+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-09-18 13:52 UTC (permalink / raw)
To: Havard Skinnemoen, Cleber Rosa Junior; +Cc: Peter Maydell, QEMU Developers
Hi Havard,
On Mon, Sep 14, 2020 at 5:47 PM Peter Maydell <peter.maydell@linaro.org> wrote:
>
> From: Havard Skinnemoen <hskinnemoen@google.com>
>
> This adds two acceptance tests for the quanta-gsj machine.
>
> One test downloads a lightly patched openbmc flash image from github and
> verifies that it boots all the way to the login prompt.
>
> The other test downloads a kernel, initrd and dtb built from the same
> openbmc source and verifies that the kernel detects all CPUs and boots
> to the point where it can't find the root filesystem (because we have no
> flash image in this case).
>
> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> Message-id: 20200911052101.2602693-15-hskinnemoen@google.com
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
[...]
> + def test_arm_quanta_gsj_initrd(self):
> + """
> + :avocado: tags=arch:arm
> + :avocado: tags=machine:quanta-gsj
> + """
> + initrd_url = (
> + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> + '20200711-gsj-qemu-0/obmc-phosphor-initramfs-gsj.cpio.xz')
> + initrd_hash = '98fefe5d7e56727b1eb17d5c00311b1b5c945300'
> + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
> + kernel_url = (
> + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> + '20200711-gsj-qemu-0/uImage-gsj.bin')
> + kernel_hash = 'fa67b2f141d56d39b3c54305c0e8a899c99eb2c7'
> + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> + dtb_url = (
> + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> + '20200711-gsj-qemu-0/nuvoton-npcm730-gsj.dtb')
> + dtb_hash = '18315f7006d7b688d8312d5c727eecd819aa36a4'
> + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> +
> + self.vm.set_console()
> + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
> + 'console=ttyS0,115200n8 '
> + 'earlycon=uart8250,mmio32,0xf0001000')
> + self.vm.add_args('-kernel', kernel_path,
> + '-initrd', initrd_path,
> + '-dtb', dtb_path,
> + '-append', kernel_command_line)
> + self.vm.launch()
> +
> + self.wait_for_console_pattern('Booting Linux on physical CPU 0x0')
> + self.wait_for_console_pattern('CPU1: thread -1, cpu 1, socket 0')
> + self.wait_for_console_pattern(
> + 'Give root password for system maintenance')
This test is failing (timeout) on our CI:
https://gitlab.com/philmd/qemu/-/jobs/745483978#L857
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj
2020-09-18 13:52 ` Philippe Mathieu-Daudé
@ 2020-09-18 13:56 ` Philippe Mathieu-Daudé
2020-09-18 16:24 ` Havard Skinnemoen
0 siblings, 1 reply; 48+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-09-18 13:56 UTC (permalink / raw)
To: Havard Skinnemoen, Cleber Rosa Junior; +Cc: Peter Maydell, QEMU Developers
On Fri, Sep 18, 2020 at 3:52 PM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> Hi Havard,
>
> On Mon, Sep 14, 2020 at 5:47 PM Peter Maydell <peter.maydell@linaro.org> wrote:
> >
> > From: Havard Skinnemoen <hskinnemoen@google.com>
> >
> > This adds two acceptance tests for the quanta-gsj machine.
> >
> > One test downloads a lightly patched openbmc flash image from github and
> > verifies that it boots all the way to the login prompt.
> >
> > The other test downloads a kernel, initrd and dtb built from the same
> > openbmc source and verifies that the kernel detects all CPUs and boots
> > to the point where it can't find the root filesystem (because we have no
> > flash image in this case).
> >
> > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> > Message-id: 20200911052101.2602693-15-hskinnemoen@google.com
> > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> > ---
> [...]
> > + def test_arm_quanta_gsj_initrd(self):
> > + """
> > + :avocado: tags=arch:arm
> > + :avocado: tags=machine:quanta-gsj
> > + """
> > + initrd_url = (
> > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > + '20200711-gsj-qemu-0/obmc-phosphor-initramfs-gsj.cpio.xz')
> > + initrd_hash = '98fefe5d7e56727b1eb17d5c00311b1b5c945300'
> > + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
> > + kernel_url = (
> > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > + '20200711-gsj-qemu-0/uImage-gsj.bin')
> > + kernel_hash = 'fa67b2f141d56d39b3c54305c0e8a899c99eb2c7'
> > + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> > + dtb_url = (
> > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > + '20200711-gsj-qemu-0/nuvoton-npcm730-gsj.dtb')
> > + dtb_hash = '18315f7006d7b688d8312d5c727eecd819aa36a4'
> > + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> > +
> > + self.vm.set_console()
> > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
> > + 'console=ttyS0,115200n8 '
> > + 'earlycon=uart8250,mmio32,0xf0001000')
> > + self.vm.add_args('-kernel', kernel_path,
> > + '-initrd', initrd_path,
> > + '-dtb', dtb_path,
> > + '-append', kernel_command_line)
> > + self.vm.launch()
> > +
> > + self.wait_for_console_pattern('Booting Linux on physical CPU 0x0')
> > + self.wait_for_console_pattern('CPU1: thread -1, cpu 1, socket 0')
> > + self.wait_for_console_pattern(
> > + 'Give root password for system maintenance')
>
> This test is failing (timeout) on our CI:
Oops I meant to keep the other one: test_arm_quanta_gsj
(not test_arm_quanta_gsj_initrd).
> https://gitlab.com/philmd/qemu/-/jobs/745483978#L857
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj
2020-09-18 13:56 ` Philippe Mathieu-Daudé
@ 2020-09-18 16:24 ` Havard Skinnemoen
0 siblings, 0 replies; 48+ messages in thread
From: Havard Skinnemoen @ 2020-09-18 16:24 UTC (permalink / raw)
To: Philippe Mathieu-Daudé
Cc: Cleber Rosa Junior, QEMU Developers, Peter Maydell
On Fri, Sep 18, 2020 at 6:57 AM Philippe Mathieu-Daudé
<philmd@redhat.com> wrote:
>
> On Fri, Sep 18, 2020 at 3:52 PM Philippe Mathieu-Daudé
> <philmd@redhat.com> wrote:
> >
> > Hi Havard,
> >
> > On Mon, Sep 14, 2020 at 5:47 PM Peter Maydell <peter.maydell@linaro.org> wrote:
> > >
> > > From: Havard Skinnemoen <hskinnemoen@google.com>
> > >
> > > This adds two acceptance tests for the quanta-gsj machine.
> > >
> > > One test downloads a lightly patched openbmc flash image from github and
> > > verifies that it boots all the way to the login prompt.
> > >
> > > The other test downloads a kernel, initrd and dtb built from the same
> > > openbmc source and verifies that the kernel detects all CPUs and boots
> > > to the point where it can't find the root filesystem (because we have no
> > > flash image in this case).
> > >
> > > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > > Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
> > > Message-id: 20200911052101.2602693-15-hskinnemoen@google.com
> > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> > > ---
> > [...]
> > > + def test_arm_quanta_gsj_initrd(self):
> > > + """
> > > + :avocado: tags=arch:arm
> > > + :avocado: tags=machine:quanta-gsj
> > > + """
> > > + initrd_url = (
> > > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > > + '20200711-gsj-qemu-0/obmc-phosphor-initramfs-gsj.cpio.xz')
> > > + initrd_hash = '98fefe5d7e56727b1eb17d5c00311b1b5c945300'
> > > + initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
> > > + kernel_url = (
> > > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > > + '20200711-gsj-qemu-0/uImage-gsj.bin')
> > > + kernel_hash = 'fa67b2f141d56d39b3c54305c0e8a899c99eb2c7'
> > > + kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> > > + dtb_url = (
> > > + 'https://github.com/hskinnemoen/openbmc/releases/download/'
> > > + '20200711-gsj-qemu-0/nuvoton-npcm730-gsj.dtb')
> > > + dtb_hash = '18315f7006d7b688d8312d5c727eecd819aa36a4'
> > > + dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> > > +
> > > + self.vm.set_console()
> > > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
> > > + 'console=ttyS0,115200n8 '
> > > + 'earlycon=uart8250,mmio32,0xf0001000')
> > > + self.vm.add_args('-kernel', kernel_path,
> > > + '-initrd', initrd_path,
> > > + '-dtb', dtb_path,
> > > + '-append', kernel_command_line)
> > > + self.vm.launch()
> > > +
> > > + self.wait_for_console_pattern('Booting Linux on physical CPU 0x0')
> > > + self.wait_for_console_pattern('CPU1: thread -1, cpu 1, socket 0')
> > > + self.wait_for_console_pattern(
> > > + 'Give root password for system maintenance')
> >
> > This test is failing (timeout) on our CI:
>
> Oops I meant to keep the other one: test_arm_quanta_gsj
> (not test_arm_quanta_gsj_initrd).
>
> > https://gitlab.com/philmd/qemu/-/jobs/745483978#L857
Sorry about that. It only takes 60-ish seconds on my (admittedly beefy) machine.
Havard
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/36] target-arm queue
2024-02-02 15:36 [PULL 00/36] target-arm queue Peter Maydell
@ 2024-02-03 13:27 ` Peter Maydell
0 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2024-02-03 13:27 UTC (permalink / raw)
To: qemu-devel
On Fri, 2 Feb 2024 at 15:36, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit c3709fde5955d13f6d4f86ab46ef3cc2288ca65e:
>
> Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging (2024-02-01 14:42:11 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240202
>
> for you to fetch changes up to f09c2b7ba9908714a3e2f1decd989462536cf731:
>
> hw/arm: Connect SPI Controller to BCM2835 (2024-02-02 13:51:59 +0000)
>
> ----------------------------------------------------------------
> target/arm: fix exception syndrome for AArch32 bkpt insn
> pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset
> system/vl.c: Fix handling of '-serial none -serial something'
> target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set
> tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array
> target/arm: Reinstate "vfp" property on AArch32 CPUs
> doc/sphinx/hxtool.py: add optional label argument to SRST directive
> hw/arm: Check for CPU types in machine_run_board_init() for various boards
> pci-host: designware: Limit value range of iATU viewport register
> hw/arm: Convert some DPRINTF macros to trace events and guest errors
> hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices
> hw/arm: Implement BCM2835 SPI Controller
>
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/9.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 00/36] target-arm queue
@ 2024-02-02 15:36 Peter Maydell
2024-02-03 13:27 ` Peter Maydell
0 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2024-02-02 15:36 UTC (permalink / raw)
To: qemu-devel
The following changes since commit c3709fde5955d13f6d4f86ab46ef3cc2288ca65e:
Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging (2024-02-01 14:42:11 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240202
for you to fetch changes up to f09c2b7ba9908714a3e2f1decd989462536cf731:
hw/arm: Connect SPI Controller to BCM2835 (2024-02-02 13:51:59 +0000)
----------------------------------------------------------------
target/arm: fix exception syndrome for AArch32 bkpt insn
pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset
system/vl.c: Fix handling of '-serial none -serial something'
target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set
tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array
target/arm: Reinstate "vfp" property on AArch32 CPUs
doc/sphinx/hxtool.py: add optional label argument to SRST directive
hw/arm: Check for CPU types in machine_run_board_init() for various boards
pci-host: designware: Limit value range of iATU viewport register
hw/arm: Convert some DPRINTF macros to trace events and guest errors
hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices
hw/arm: Implement BCM2835 SPI Controller
----------------------------------------------------------------
David Woodhouse (1):
doc/sphinx/hxtool.py: add optional label argument to SRST directive
Guenter Roeck (1):
pci-host: designware: Limit value range of iATU viewport register
Hao Wu (2):
hw/net: Add NPCMXXX GMAC device
hw/arm: Add GMAC devices to NPCM7XX SoC
Jan Klötzke (1):
target/arm: fix exception syndrome for AArch32 bkpt insn
Manos Pitsidianakis (6):
hw/arm/strongarm.c: convert DPRINTF to trace events and guest errors
hw/arm/z2: convert DPRINTF to trace events and guest errors
hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reports
hw/xen/xen-mapcache.c: convert DPRINTF to tracepoints
hw/xen/xen-hvm-common.c: convert DPRINTF to tracepoints
hw/xen: convert stderr prints to error/warn reports
Nabih Estefan Diaz (4):
tests/qtest: Creating qtest for GMAC Module
hw/net: GMAC Rx Implementation
hw/net: GMAC Tx Implementation
tests/qtest: Adding PCS Module test to GMAC Qtest
Peter Maydell (10):
pci: Switch bus reset to 3-phase-reset
vmbus: Switch bus reset to 3-phase-reset
adb: Switch bus reset to 3-phase-reset
hw/s390x/css-bridge: switch virtual-css bus to 3-phase-reset
hw/core: Remove transitional infrastructure from BusClass
system/vl.c: Fix handling of '-serial none -serial something'
qemu-options.hx: Improve -serial option documentation
target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set
tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array
target/arm: Reinstate "vfp" property on AArch32 CPUs
Philippe Mathieu-Daudé (9):
hw/arm/exynos: Add missing QOM parent for CPU cores
hw/arm/exynos: Check for CPU types in machine_run_board_init()
hw/arm/highbank: Add missing QOM parent for CPU cores
hw/arm/highbank: Check for CPU types in machine_run_board_init()
hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[]
hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[]
hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[]
hw/arm/vexpress: Check for CPU types in machine_run_board_init()
hw/arm/zynq: Check for CPU types in machine_run_board_init()
Rayhan Faizel (2):
hw/ssi: Implement BCM2835 SPI Controller
hw/arm: Connect SPI Controller to BCM2835
docs/devel/docs.rst | 12 +-
docs/sphinx/hxtool.py | 16 +
docs/system/arm/raspi.rst | 2 +-
docs/system/i386/xen.rst | 3 +-
include/hw/arm/bcm2835_peripherals.h | 3 +-
include/hw/arm/msf2-soc.h | 3 -
include/hw/arm/npcm7xx.h | 2 +
include/hw/net/npcm_gmac.h | 343 +++++++++++++
include/hw/qdev-core.h | 2 -
include/hw/ssi/bcm2835_spi.h | 81 +++
target/arm/syndrome.h | 8 +
hw/arm/bcm2835_peripherals.c | 17 +-
hw/arm/exynos4210.c | 1 +
hw/arm/exynos4_boards.c | 8 +
hw/arm/highbank.c | 11 +
hw/arm/msf2-soc.c | 3 +-
hw/arm/msf2-som.c | 4 -
hw/arm/musca.c | 1 -
hw/arm/npcm7xx.c | 37 +-
hw/arm/npcm7xx_boards.c | 1 -
hw/arm/strongarm.c | 82 +--
hw/arm/vexpress.c | 12 +-
hw/arm/xen_arm.c | 23 +-
hw/arm/xilinx_zynq.c | 6 +-
hw/arm/z2.c | 27 +-
hw/core/bus.c | 67 ---
hw/hyperv/vmbus.c | 7 +-
hw/input/adb.c | 7 +-
hw/net/npcm_gmac.c | 942 +++++++++++++++++++++++++++++++++++
hw/pci-host/designware.c | 2 +
hw/pci/pci.c | 10 +-
hw/s390x/css-bridge.c | 5 +-
hw/ssi/bcm2835_spi.c | 288 +++++++++++
hw/xen/xen-hvm-common.c | 47 +-
hw/xen/xen-mapcache.c | 59 +--
system/vl.c | 22 +-
target/arm/cpu.c | 4 +
target/arm/helper.c | 19 +
tests/qtest/npcm_gmac-test.c | 344 +++++++++++++
tests/qtest/xlnx-versal-trng-test.c | 19 +-
tests/tcg/aarch64/sysregs.c | 2 +-
hw/arm/Kconfig | 1 +
hw/arm/trace-events | 15 +
hw/net/meson.build | 2 +-
hw/net/trace-events | 19 +
hw/ssi/Kconfig | 4 +
hw/ssi/meson.build | 1 +
hw/xen/trace-events | 21 +-
qemu-options.hx | 16 +-
tests/qtest/meson.build | 1 +
50 files changed, 2388 insertions(+), 244 deletions(-)
create mode 100644 include/hw/net/npcm_gmac.h
create mode 100644 include/hw/ssi/bcm2835_spi.h
create mode 100644 hw/net/npcm_gmac.c
create mode 100644 hw/ssi/bcm2835_spi.c
create mode 100644 tests/qtest/npcm_gmac-test.c
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/36] target-arm queue
2024-01-26 14:33 Peter Maydell
@ 2024-01-27 13:00 ` Peter Maydell
0 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2024-01-27 13:00 UTC (permalink / raw)
To: qemu-devel
On Fri, 26 Jan 2024 at 14:33, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> The following changes since commit 5bab95dc74d43bbb28c6a96d24c810a664432057:
>
> Merge tag 'pull-request-2024-01-24' of https://gitlab.com/thuth/qemu into staging (2024-01-25 12:33:42 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240126
>
> for you to fetch changes up to 5e6be95ed1578c7cfac2082b39384d99fd912508:
>
> hw/arm: add PCIe to Freescale i.MX6 (2024-01-26 12:23:04 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Fix VNCR fault detection logic
> * Fix A64 scalar SQSHRN and SQRSHRN
> * Fix incorrect aa64_tidcp1 feature check
> * hw/arm/virt.c: Remove newline from error_report() string
> * hw/arm/musicpal: Convert to qemu_add_kbd_event_handler()
> * hw/arm/allwinner-a10: Unconditionally map the USB Host controllers
> * hw/arm/nseries: Unconditionally map the TUSB6010 USB Host controller
> * hw/arm: Add EHCI/OHCI controllers to Allwinner R40 and Bananapi board
> * hw/arm: Add AHCI/SATA controller to Allwinner R40 and Bananapi board
> * hw/arm: Add watchdog timer to Allwinner H40 and Bananapi board
> * arm: various include header cleanups
> * cleanups to allow some files to be built only once
> * fsl-imx6ul: Add various missing unimplemented devices
> * docs/system/arm/virt.rst: Add note on CPU features off by default
> * hw/char/imx_serial: Implement receive FIFO and ageing timer
> * target/xtensa: fix OOB TLB entry access
> * bswap.h: Fix const_le64() macro
> * hw/arm: add PCIe to Freescale i.MX6
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/9.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 00/36] target-arm queue
@ 2024-01-26 14:33 Peter Maydell
2024-01-27 13:00 ` Peter Maydell
0 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2024-01-26 14:33 UTC (permalink / raw)
To: qemu-devel
The following changes since commit 5bab95dc74d43bbb28c6a96d24c810a664432057:
Merge tag 'pull-request-2024-01-24' of https://gitlab.com/thuth/qemu into staging (2024-01-25 12:33:42 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240126
for you to fetch changes up to 5e6be95ed1578c7cfac2082b39384d99fd912508:
hw/arm: add PCIe to Freescale i.MX6 (2024-01-26 12:23:04 +0000)
----------------------------------------------------------------
target-arm queue:
* Fix VNCR fault detection logic
* Fix A64 scalar SQSHRN and SQRSHRN
* Fix incorrect aa64_tidcp1 feature check
* hw/arm/virt.c: Remove newline from error_report() string
* hw/arm/musicpal: Convert to qemu_add_kbd_event_handler()
* hw/arm/allwinner-a10: Unconditionally map the USB Host controllers
* hw/arm/nseries: Unconditionally map the TUSB6010 USB Host controller
* hw/arm: Add EHCI/OHCI controllers to Allwinner R40 and Bananapi board
* hw/arm: Add AHCI/SATA controller to Allwinner R40 and Bananapi board
* hw/arm: Add watchdog timer to Allwinner H40 and Bananapi board
* arm: various include header cleanups
* cleanups to allow some files to be built only once
* fsl-imx6ul: Add various missing unimplemented devices
* docs/system/arm/virt.rst: Add note on CPU features off by default
* hw/char/imx_serial: Implement receive FIFO and ageing timer
* target/xtensa: fix OOB TLB entry access
* bswap.h: Fix const_le64() macro
* hw/arm: add PCIe to Freescale i.MX6
----------------------------------------------------------------
Guenter Roeck (4):
hw/arm: Add EHCI/OHCI controllers to Allwinner R40 and Bananapi board
hw/arm: Add AHCI/SATA controller to Allwinner R40 and Bananapi board
hw/arm: Add watchdog timer to Allwinner H40 and Bananapi board
fsl-imx6ul: Add various missing unimplemented devices
Gustavo Romero (1):
docs/system/arm/virt.rst: Add note on CPU features off by default
Max Filippov (1):
target/xtensa: fix OOB TLB entry access
Nikita Ostrenkov (1):
hw/arm: add PCIe to Freescale i.MX6
Peter Maydell (6):
target/arm: Fix VNCR fault detection logic
hw/arm/virt.c: Remove newline from error_report() string
hw/arm/musicpal: Convert to qemu_add_kbd_event_handler()
target/arm: Fix A64 scalar SQSHRN and SQRSHRN
bswap.h: Fix const_le64() macro
target/arm: Fix incorrect aa64_tidcp1 feature check
Philippe Mathieu-Daudé (20):
hw/arm/allwinner-a10: Unconditionally map the USB Host controllers
hw/arm/nseries: Unconditionally map the TUSB6010 USB Host controller
hw/arm/exynos4210: Include missing 'exec/tswap.h' header
hw/arm/xilinx_zynq: Include missing 'exec/tswap.h' header
hw/arm/smmuv3: Include missing 'hw/registerfields.h' header
hw/arm/xlnx-versal: Include missing 'cpu.h' header
target/arm/cpu-features: Include missing 'hw/registerfields.h' header
target/arm/cpregs: Include missing 'hw/registerfields.h' header
target/arm/cpregs: Include missing 'kvm-consts.h' header
target/arm: Expose arm_cpu_mp_affinity() in 'multiprocessing.h' header
target/arm: Declare ARM_CPU_TYPE_NAME/SUFFIX in 'cpu-qom.h'
hw/cpu/a9mpcore: Build it only once
hw/misc/xlnx-versal-crl: Include generic 'cpu-qom.h' instead of 'cpu.h'
hw/misc/xlnx-versal-crl: Build it only once
target/arm: Expose M-profile register bank index definitions
hw/arm/armv7m: Make 'hw/intc/armv7m_nvic.h' a target agnostic header
target/arm: Move ARM_CPU_IRQ/FIQ definitions to 'cpu-qom.h' header
target/arm: Move e2h_access() helper around
target/arm: Move GTimer definitions to new 'gtimer.h' header
hw/arm: Build various units only once
Rayhan Faizel (1):
hw/char/imx_serial: Implement receive FIFO and ageing timer
Richard Henderson (2):
target/arm: Rename arm_cpu_mp_affinity
target/arm: Create arm_cpu_mp_affinity
docs/system/arm/bananapi_m2u.rst | 5 +-
docs/system/arm/virt.rst | 13 ++++
hw/arm/smmuv3-internal.h | 1 +
include/hw/arm/allwinner-r40.h | 15 +++++
include/hw/arm/fsl-imx6.h | 44 +++++++------
include/hw/arm/fsl-imx6ul.h | 2 +
include/hw/arm/xlnx-versal.h | 1 +
include/hw/char/imx_serial.h | 20 +++++-
include/hw/intc/armv7m_nvic.h | 2 +-
include/hw/misc/xlnx-versal-crl.h | 2 +-
include/qemu/bswap.h | 16 ++---
target/arm/cpregs.h | 3 +
target/arm/cpu-features.h | 4 +-
target/arm/cpu-qom.h | 24 +++++++
target/arm/cpu.h | 34 +---------
target/arm/gtimer.h | 21 ++++++
target/arm/multiprocessing.h | 16 +++++
hw/arm/allwinner-a10.c | 50 ++++++--------
hw/arm/allwinner-h3.c | 2 +
hw/arm/allwinner-r40.c | 69 +++++++++++++++++++-
hw/arm/armv7m.c | 2 +
hw/arm/aspeed_ast2400.c | 1 +
hw/arm/aspeed_ast2600.c | 1 +
hw/arm/bcm2836.c | 2 +
hw/arm/collie.c | 1 -
hw/arm/exynos4210.c | 2 +
hw/arm/fsl-imx25.c | 1 +
hw/arm/fsl-imx31.c | 1 +
hw/arm/fsl-imx6.c | 26 ++++++++
hw/arm/fsl-imx6ul.c | 31 +++++++++
hw/arm/fsl-imx7.c | 1 +
hw/arm/gumstix.c | 1 -
hw/arm/highbank.c | 1 +
hw/arm/integratorcp.c | 2 +-
hw/arm/mainstone.c | 1 -
hw/arm/musicpal.c | 133 ++++++++++++++++++--------------------
hw/arm/npcm7xx.c | 3 +-
hw/arm/nseries.c | 4 +-
hw/arm/omap1.c | 1 +
hw/arm/omap2.c | 2 +-
hw/arm/omap_sx1.c | 1 -
hw/arm/palm.c | 1 -
hw/arm/realview.c | 1 +
hw/arm/sbsa-ref.c | 4 +-
hw/arm/spitz.c | 1 -
hw/arm/strongarm.c | 2 +-
hw/arm/versatilepb.c | 2 +-
hw/arm/vexpress.c | 2 +-
hw/arm/virt-acpi-build.c | 4 +-
hw/arm/virt.c | 15 +++--
hw/arm/xilinx_zynq.c | 3 +-
hw/arm/xlnx-versal-virt.c | 5 +-
hw/arm/xlnx-versal.c | 2 +
hw/arm/xlnx-zynqmp.c | 2 +
hw/arm/z2.c | 1 -
hw/char/imx_serial.c | 102 +++++++++++++++++++++++++----
hw/cpu/a15mpcore.c | 1 +
hw/cpu/a9mpcore.c | 2 +-
hw/misc/xlnx-versal-crl.c | 5 +-
target/arm/arm-powerctl.c | 3 +-
target/arm/cpu.c | 13 +++-
target/arm/helper.c | 30 +++++----
target/arm/hvf/hvf.c | 6 +-
target/arm/kvm.c | 1 +
target/arm/machine.c | 1 +
target/arm/tcg/psci.c | 3 +-
target/arm/tcg/tlb_helper.c | 2 +-
target/arm/tcg/translate-a64.c | 2 +-
target/xtensa/mmu_helper.c | 47 ++++++++++----
hw/arm/Kconfig | 6 ++
hw/arm/meson.build | 23 +++----
hw/cpu/meson.build | 2 +-
hw/misc/meson.build | 2 +-
73 files changed, 597 insertions(+), 261 deletions(-)
create mode 100644 target/arm/gtimer.h
create mode 100644 target/arm/multiprocessing.h
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/36] target-arm queue
2020-12-10 11:47 Peter Maydell
@ 2020-12-10 12:51 ` Peter Maydell
0 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-12-10 12:51 UTC (permalink / raw)
To: QEMU Developers
On Thu, 10 Dec 2020 at 11:47, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> First pullreq for 6.0: mostly my v8.1M work, plus some other
> bits and pieces. (I still have a lot of stuff in my to-review
> folder, which I may or may not get to before the Christmas break...)
>
> thanks
> -- PMM
>
> The following changes since commit 5e7b204dbfae9a562fc73684986f936b97f63877:
>
> Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-12-09 20:08:54 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201210
>
> for you to fetch changes up to 71f916be1c7e9ede0e37d9cabc781b5a9e8638ff:
>
> hw/arm/armv7m: Correct typo in QOM object name (2020-12-10 11:44:56 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * hw/arm/smmuv3: Fix up L1STD_SPAN decoding
> * xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
> * sbsa-ref: allow to use Cortex-A53/57/72 cpus
> * Various minor code cleanups
> * hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
> * Implement more pieces of ARMv8.1M support
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 00/36] target-arm queue
@ 2020-12-10 11:47 Peter Maydell
2020-12-10 12:51 ` Peter Maydell
0 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2020-12-10 11:47 UTC (permalink / raw)
To: qemu-devel
First pullreq for 6.0: mostly my v8.1M work, plus some other
bits and pieces. (I still have a lot of stuff in my to-review
folder, which I may or may not get to before the Christmas break...)
thanks
-- PMM
The following changes since commit 5e7b204dbfae9a562fc73684986f936b97f63877:
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2020-12-09 20:08:54 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201210
for you to fetch changes up to 71f916be1c7e9ede0e37d9cabc781b5a9e8638ff:
hw/arm/armv7m: Correct typo in QOM object name (2020-12-10 11:44:56 +0000)
----------------------------------------------------------------
target-arm queue:
* hw/arm/smmuv3: Fix up L1STD_SPAN decoding
* xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
* sbsa-ref: allow to use Cortex-A53/57/72 cpus
* Various minor code cleanups
* hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
* Implement more pieces of ARMv8.1M support
----------------------------------------------------------------
Alex Chen (4):
i.MX25: Fix bad printf format specifiers
i.MX31: Fix bad printf format specifiers
i.MX6: Fix bad printf format specifiers
i.MX6ul: Fix bad printf format specifiers
Havard Skinnemoen (1):
tests/qtest/npcm7xx_rng-test: dump random data on failure
Kunkun Jiang (1):
hw/arm/smmuv3: Fix up L1STD_SPAN decoding
Marcin Juszkiewicz (1):
sbsa-ref: allow to use Cortex-A53/57/72 cpus
Peter Maydell (25):
hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
target/arm: Implement v8.1M PXN extension
target/arm: Don't clobber ID_PFR1.Security on M-profile cores
target/arm: Implement VSCCLRM insn
target/arm: Implement CLRM instruction
target/arm: Enforce M-profile VMRS/VMSR register restrictions
target/arm: Refactor M-profile VMSR/VMRS handling
target/arm: Move general-use constant expanders up in translate.c
target/arm: Implement VLDR/VSTR system register
target/arm: Implement M-profile FPSCR_nzcvqc
target/arm: Use new FPCR_NZCV_MASK constant
target/arm: Factor out preserve-fp-state from full_vfp_access_check()
target/arm: Implement FPCXT_S fp system register
hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry
target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures
target/arm: Implement v8.1M REVIDR register
target/arm: Implement new v8.1M NOCP check for exception return
target/arm: Implement new v8.1M VLLDM and VLSTM encodings
hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
target/arm: Implement CCR_S.TRD behaviour for SG insns
hw/intc/armv7m_nvic: Fix "return from inactive handler" check
target/arm: Implement M-profile "minimal RAS implementation"
hw/intc/armv7m_nvic: Implement read/write for RAS register block
hw/arm/armv7m: Correct typo in QOM object name
Vikram Garhwal (4):
hw/net/can: Introduce Xilinx ZynqMP CAN controller
xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers
tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller
MAINTAINERS: Add maintainer entry for Xilinx ZynqMP CAN controller
meson.build | 1 +
hw/arm/smmuv3-internal.h | 2 +-
hw/net/can/trace.h | 1 +
include/hw/arm/xlnx-zynqmp.h | 8 +
include/hw/intc/armv7m_nvic.h | 2 +
include/hw/net/xlnx-zynqmp-can.h | 78 +++
target/arm/cpu.h | 46 ++
target/arm/m-nocp.decode | 10 +-
target/arm/t32.decode | 10 +-
target/arm/vfp.decode | 14 +
hw/arm/armv7m.c | 4 +-
hw/arm/sbsa-ref.c | 23 +-
hw/arm/xlnx-zcu102.c | 20 +
hw/arm/xlnx-zynqmp.c | 34 ++
hw/intc/armv7m_nvic.c | 246 ++++++--
hw/misc/imx25_ccm.c | 12 +-
hw/misc/imx31_ccm.c | 14 +-
hw/misc/imx6_ccm.c | 20 +-
hw/misc/imx6_src.c | 2 +-
hw/misc/imx6ul_ccm.c | 4 +-
hw/misc/imx_ccm.c | 4 +-
hw/net/can/xlnx-zynqmp-can.c | 1161 ++++++++++++++++++++++++++++++++++++++
target/arm/cpu.c | 5 +-
target/arm/helper.c | 7 +-
target/arm/m_helper.c | 130 ++++-
target/arm/translate.c | 105 +++-
tests/qtest/npcm7xx_rng-test.c | 12 +
tests/qtest/xlnx-can-test.c | 360 ++++++++++++
MAINTAINERS | 8 +
hw/Kconfig | 1 +
hw/net/can/meson.build | 1 +
hw/net/can/trace-events | 9 +
target/arm/translate-vfp.c.inc | 511 ++++++++++++++++-
tests/qtest/meson.build | 1 +
34 files changed, 2713 insertions(+), 153 deletions(-)
create mode 100644 hw/net/can/trace.h
create mode 100644 include/hw/net/xlnx-zynqmp-can.h
create mode 100644 hw/net/can/xlnx-zynqmp-can.c
create mode 100644 tests/qtest/xlnx-can-test.c
create mode 100644 hw/net/can/trace-events
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [PULL 00/36] target-arm queue
2020-03-12 16:44 Peter Maydell
@ 2020-03-12 20:32 ` Peter Maydell
0 siblings, 0 replies; 48+ messages in thread
From: Peter Maydell @ 2020-03-12 20:32 UTC (permalink / raw)
To: QEMU Developers
On Thu, 12 Mar 2020 at 16:45, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> arm queue; dunno if this will be the last before softfreeze
> or not, but anyway probably the last large one. New orangepi-pc
> board model is the big item here.
>
> thanks
> -- PMM
>
> The following changes since commit 67d9ef7d541c3d21a25796c51c26da096a433565:
>
> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging (2020-03-12 15:20:52 +0000)
>
> are available in the Git repository at:
>
> https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200312
>
> for you to fetch changes up to aca53be34ac3e7cac5f39396a51a338860a5a837:
>
> target/arm: kvm: Inject events at the last stage of sync (2020-03-12 16:31:10 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
> * Fix various bugs that might result in an assert() due to
> incorrect hflags for M-profile CPUs
> * Fix Aspeed SMC Controller user-mode select handling
> * Report correct (with-tag) address in fault address register
> when TBI is enabled
> * cubieboard: make sure SOC object isn't leaked
> * fsl-imx25: Wire up eSDHC controllers
> * fsl-imx25: Wire up USB controllers
> * New board model: orangepi-pc (OrangePi PC)
> * ARM/KVM: if user doesn't select GIC version and the
> host kernel can only provide GICv3, use that, rather
> than defaulting to "fail because GICv2 isn't possible"
> * kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/5.0
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 48+ messages in thread
* [PULL 00/36] target-arm queue
@ 2020-03-12 16:44 Peter Maydell
2020-03-12 20:32 ` Peter Maydell
0 siblings, 1 reply; 48+ messages in thread
From: Peter Maydell @ 2020-03-12 16:44 UTC (permalink / raw)
To: qemu-devel
arm queue; dunno if this will be the last before softfreeze
or not, but anyway probably the last large one. New orangepi-pc
board model is the big item here.
thanks
-- PMM
The following changes since commit 67d9ef7d541c3d21a25796c51c26da096a433565:
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20200312' into staging (2020-03-12 15:20:52 +0000)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200312
for you to fetch changes up to aca53be34ac3e7cac5f39396a51a338860a5a837:
target/arm: kvm: Inject events at the last stage of sync (2020-03-12 16:31:10 +0000)
----------------------------------------------------------------
target-arm queue:
* Fix various bugs that might result in an assert() due to
incorrect hflags for M-profile CPUs
* Fix Aspeed SMC Controller user-mode select handling
* Report correct (with-tag) address in fault address register
when TBI is enabled
* cubieboard: make sure SOC object isn't leaked
* fsl-imx25: Wire up eSDHC controllers
* fsl-imx25: Wire up USB controllers
* New board model: orangepi-pc (OrangePi PC)
* ARM/KVM: if user doesn't select GIC version and the
host kernel can only provide GICv3, use that, rather
than defaulting to "fail because GICv2 isn't possible"
* kvm: Only do KVM_SET_VCPU_EVENTS at the last stage of sync
----------------------------------------------------------------
Beata Michalska (1):
target/arm: kvm: Inject events at the last stage of sync
Cédric Le Goater (2):
aspeed/smc: Add some tracing
aspeed/smc: Fix User mode select/unselect scheme
Eric Auger (6):
hw/arm/virt: Document 'max' value in gic-version property description
hw/arm/virt: Introduce VirtGICType enum type
hw/arm/virt: Introduce finalize_gic_version()
target/arm/kvm: Let kvm_arm_vgic_probe() return a bitmap
hw/arm/virt: kvm: Restructure finalize_gic_version()
hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
Guenter Roeck (2):
hw/arm/fsl-imx25: Wire up eSDHC controllers
hw/arm/fsl-imx25: Wire up USB controllers
Igor Mammedov (1):
hw/arm/cubieboard: make sure SOC object isn't leaked
Niek Linnenbank (13):
hw/arm: add Allwinner H3 System-on-Chip
hw/arm: add Xunlong Orange Pi PC machine
hw/arm/allwinner-h3: add Clock Control Unit
hw/arm/allwinner-h3: add USB host controller
hw/arm/allwinner-h3: add System Control module
hw/arm/allwinner: add CPU Configuration module
hw/arm/allwinner: add Security Identifier device
hw/arm/allwinner: add SD/MMC host controller
hw/arm/allwinner-h3: add EMAC ethernet device
hw/arm/allwinner-h3: add Boot ROM support
hw/arm/allwinner-h3: add SDRAM controller device
hw/arm/allwinner: add RTC device support
docs: add Orange Pi PC document
Peter Maydell (4):
hw/intc/armv7m_nvic: Rebuild hflags on reset
target/arm: Update hflags in trans_CPS_v7m()
target/arm: Recalculate hflags correctly after writes to CONTROL
target/arm: Fix some comment typos
Philippe Mathieu-Daudé (5):
tests/boot_linux_console: Add a quick test for the OrangePi PC board
tests/boot_linux_console: Add initrd test for the Orange Pi PC board
tests/boot_linux_console: Add a SD card test for the OrangePi PC board
tests/boot_linux_console: Add a SLOW test booting Ubuntu on OrangePi PC
tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC
Richard Henderson (2):
target/arm: Check addresses for disabled regimes
target/arm: Disable clean_data_tbi for system mode
Makefile.objs | 1 +
hw/arm/Makefile.objs | 1 +
hw/misc/Makefile.objs | 5 +
hw/net/Makefile.objs | 1 +
hw/rtc/Makefile.objs | 1 +
hw/sd/Makefile.objs | 1 +
hw/usb/hcd-ehci.h | 1 +
include/hw/arm/allwinner-a10.h | 4 +
include/hw/arm/allwinner-h3.h | 161 ++++++
include/hw/arm/fsl-imx25.h | 18 +
include/hw/arm/virt.h | 12 +-
include/hw/misc/allwinner-cpucfg.h | 52 ++
include/hw/misc/allwinner-h3-ccu.h | 66 +++
include/hw/misc/allwinner-h3-dramc.h | 106 ++++
include/hw/misc/allwinner-h3-sysctrl.h | 67 +++
include/hw/misc/allwinner-sid.h | 60 +++
include/hw/net/allwinner-sun8i-emac.h | 99 ++++
include/hw/rtc/allwinner-rtc.h | 134 +++++
include/hw/sd/allwinner-sdhost.h | 135 +++++
target/arm/helper.h | 1 +
target/arm/kvm_arm.h | 3 +
hw/arm/allwinner-a10.c | 19 +
hw/arm/allwinner-h3.c | 465 ++++++++++++++++++
hw/arm/cubieboard.c | 18 +
hw/arm/fsl-imx25.c | 56 +++
hw/arm/imx25_pdk.c | 16 +
hw/arm/orangepi.c | 130 +++++
hw/arm/virt.c | 145 ++++--
hw/intc/armv7m_nvic.c | 6 +
hw/misc/allwinner-cpucfg.c | 282 +++++++++++
hw/misc/allwinner-h3-ccu.c | 242 +++++++++
hw/misc/allwinner-h3-dramc.c | 358 ++++++++++++++
hw/misc/allwinner-h3-sysctrl.c | 140 ++++++
hw/misc/allwinner-sid.c | 168 +++++++
hw/net/allwinner-sun8i-emac.c | 871 +++++++++++++++++++++++++++++++++
hw/rtc/allwinner-rtc.c | 411 ++++++++++++++++
hw/sd/allwinner-sdhost.c | 854 ++++++++++++++++++++++++++++++++
hw/ssi/aspeed_smc.c | 56 ++-
hw/usb/hcd-ehci-sysbus.c | 17 +
target/arm/helper.c | 49 +-
target/arm/kvm.c | 14 +-
target/arm/kvm32.c | 15 +-
target/arm/kvm64.c | 15 +-
target/arm/translate-a64.c | 11 +
target/arm/translate.c | 14 +-
MAINTAINERS | 9 +
default-configs/arm-softmmu.mak | 1 +
docs/system/arm/orangepi.rst | 253 ++++++++++
docs/system/target-arm.rst | 2 +
hw/arm/Kconfig | 12 +
hw/misc/trace-events | 19 +
hw/net/Kconfig | 3 +
hw/net/trace-events | 10 +
hw/rtc/trace-events | 4 +
hw/sd/trace-events | 7 +
hw/ssi/trace-events | 10 +
tests/acceptance/boot_linux_console.py | 230 +++++++++
57 files changed, 5787 insertions(+), 74 deletions(-)
create mode 100644 include/hw/arm/allwinner-h3.h
create mode 100644 include/hw/misc/allwinner-cpucfg.h
create mode 100644 include/hw/misc/allwinner-h3-ccu.h
create mode 100644 include/hw/misc/allwinner-h3-dramc.h
create mode 100644 include/hw/misc/allwinner-h3-sysctrl.h
create mode 100644 include/hw/misc/allwinner-sid.h
create mode 100644 include/hw/net/allwinner-sun8i-emac.h
create mode 100644 include/hw/rtc/allwinner-rtc.h
create mode 100644 include/hw/sd/allwinner-sdhost.h
create mode 100644 hw/arm/allwinner-h3.c
create mode 100644 hw/arm/orangepi.c
create mode 100644 hw/misc/allwinner-cpucfg.c
create mode 100644 hw/misc/allwinner-h3-ccu.c
create mode 100644 hw/misc/allwinner-h3-dramc.c
create mode 100644 hw/misc/allwinner-h3-sysctrl.c
create mode 100644 hw/misc/allwinner-sid.c
create mode 100644 hw/net/allwinner-sun8i-emac.c
create mode 100644 hw/rtc/allwinner-rtc.c
create mode 100644 hw/sd/allwinner-sdhost.c
create mode 100644 docs/system/arm/orangepi.rst
create mode 100644 hw/ssi/trace-events
^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2024-02-03 13:28 UTC | newest]
Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-14 14:06 [PULL 00/36] target-arm queue Peter Maydell
2020-09-14 14:06 ` [PULL 01/36] hw/misc/a9scu: Do not allow invalid CPU count Peter Maydell
2020-09-14 14:06 ` [PULL 02/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fields Peter Maydell
2020-09-14 14:06 ` [PULL 03/36] hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fields Peter Maydell
2020-09-14 14:06 ` [PULL 04/36] hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP) Peter Maydell
2020-09-14 14:06 ` [PULL 05/36] hw/timer/armv7m_systick: assert that board code set system_clock_scale Peter Maydell
2020-09-14 14:06 ` [PULL 06/36] decodetree: Improve identifier matching Peter Maydell
2020-09-14 14:06 ` [PULL 07/36] target/arm: Convert Neon 3-same-fp size field to MO_* in decode Peter Maydell
2020-09-14 14:06 ` [PULL 08/36] target/arm: Convert Neon VCVT fp " Peter Maydell
2020-09-14 14:06 ` [PULL 09/36] target/arm: Convert VCMLA, VCADD " Peter Maydell
2020-09-14 14:06 ` [PULL 10/36] target/arm: Remove KVM support for 32-bit Arm hosts Peter Maydell
2020-09-14 14:06 ` [PULL 11/36] target/arm: Remove no-longer-reachable 32-bit KVM code Peter Maydell
2020-09-14 14:06 ` [PULL 12/36] hw/arm/mps2: New board model mps2-an386 Peter Maydell
2020-09-14 14:06 ` [PULL 13/36] hw/arm/mps2: New board model mps2-an500 Peter Maydell
2020-09-14 14:06 ` [PULL 14/36] docs/system/arm/mps2.rst: Make board list consistent Peter Maydell
2020-09-14 14:06 ` [PULL 15/36] Deprecate Unicore32 port Peter Maydell
2020-09-14 14:06 ` [PULL 16/36] Deprecate lm32 port Peter Maydell
2020-09-14 14:06 ` [PULL 17/36] target/arm: Count PMU events when MDCR.SPME is set Peter Maydell
2020-09-14 14:06 ` [PULL 18/36] hw/arm: versal-virt: Correct the tx/rx GEM clocks Peter Maydell
2020-09-14 14:06 ` [PULL 19/36] hw/misc: Add NPCM7xx System Global Control Registers device model Peter Maydell
2020-09-14 14:06 ` [PULL 20/36] hw/misc: Add NPCM7xx Clock Controller " Peter Maydell
2020-09-14 14:06 ` [PULL 21/36] hw/timer: Add NPCM7xx Timer " Peter Maydell
2020-09-14 14:06 ` [PULL 22/36] hw/arm: Add NPCM730 and NPCM750 SoC models Peter Maydell
2020-09-14 14:06 ` [PULL 23/36] hw/arm: Add two NPCM7xx-based machines Peter Maydell
2020-09-14 14:06 ` [PULL 24/36] roms: Add virtual Boot ROM for NPCM7xx SoCs Peter Maydell
2020-09-14 14:06 ` [PULL 25/36] hw/arm: Load -bios image as a boot ROM for npcm7xx Peter Maydell
2020-09-14 14:06 ` [PULL 26/36] hw/nvram: NPCM7xx OTP device model Peter Maydell
2020-09-14 14:06 ` [PULL 27/36] hw/mem: Stubbed out NPCM7xx Memory Controller model Peter Maydell
2020-09-14 14:06 ` [PULL 28/36] hw/ssi: NPCM7xx Flash Interface Unit device model Peter Maydell
2020-09-14 14:06 ` [PULL 29/36] hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj Peter Maydell
2020-09-14 14:06 ` [PULL 30/36] hw/arm/npcm7xx: add board setup stub for CPU and UART clocks Peter Maydell
2020-09-14 14:06 ` [PULL 31/36] docs/system: Add Nuvoton machine documentation Peter Maydell
2020-09-14 14:06 ` [PULL 32/36] tests/acceptance: console boot tests for quanta-gsj Peter Maydell
2020-09-18 13:52 ` Philippe Mathieu-Daudé
2020-09-18 13:56 ` Philippe Mathieu-Daudé
2020-09-18 16:24 ` Havard Skinnemoen
2020-09-14 14:06 ` [PULL 33/36] hw/net/can: Introduce Xilinx ZynqMP CAN controller Peter Maydell
2020-09-14 14:06 ` [PULL 34/36] xlnx-zynqmp: Connect Xilinx ZynqMP CAN controllers Peter Maydell
2020-09-14 14:06 ` [PULL 35/36] tests/qtest: Introduce tests for Xilinx ZynqMP CAN controller Peter Maydell
2020-09-14 14:06 ` [PULL 36/36] MAINTAINERS: Add maintainer entry " Peter Maydell
-- strict thread matches above, loose matches on Subject: below --
2024-02-02 15:36 [PULL 00/36] target-arm queue Peter Maydell
2024-02-03 13:27 ` Peter Maydell
2024-01-26 14:33 Peter Maydell
2024-01-27 13:00 ` Peter Maydell
2020-12-10 11:47 Peter Maydell
2020-12-10 12:51 ` Peter Maydell
2020-03-12 16:44 Peter Maydell
2020-03-12 20:32 ` Peter Maydell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).