From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 00/41] target-arm queue
Date: Tue, 20 Oct 2020 16:56:15 +0100 [thread overview]
Message-ID: <20201020155656.8045-1-peter.maydell@linaro.org> (raw)
The following changes since commit 4c41341af76cfc85b5a6c0f87de4838672ab9f89:
Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20201020' into staging (2020-10-20 11:20:36 +0100)
are available in the Git repository at:
https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20201020
for you to fetch changes up to 6358890cb939192f6169fdf7664d903bf9b1d338:
tests/tcg/aarch64: Add bti smoke tests (2020-10-20 16:12:02 +0100)
----------------------------------------------------------------
target-arm queue:
* Fix AArch32 SMLAD incorrect setting of Q bit
* AArch32 VCVT fixed-point to float is always round-to-nearest
* strongarm: Fix 'time to transmit a char' unit comment
* Restrict APEI tables generation to the 'virt' machine
* bcm2835: minor code cleanups
* correctly flush TLBs when TBI is enabled
* tests/qtest: Add npcm7xx timer test
* loads-stores.rst: add footnote that clarifies GETPC usage
* Fix reported EL for mte_check_fail
* Ignore HCR_EL2.ATA when {E2H,TGE} != 11
* microbit_i2c: Fix coredump when dump-vmstate
* nseries: Fix loading kernel image on n8x0 machines
* Implement v8.1M low-overhead-loops
* linux-user: Support AArch64 BTI
----------------------------------------------------------------
Emanuele Giuseppe Esposito (1):
loads-stores.rst: add footnote that clarifies GETPC usage
Havard Skinnemoen (1):
tests/qtest: Add npcm7xx timer test
Peng Liang (1):
microbit_i2c: Fix coredump when dump-vmstate
Peter Maydell (12):
target/arm: Fix SMLAD incorrect setting of Q bit
target/arm: AArch32 VCVT fixed-point to float is always round-to-nearest
decodetree: Fix codegen for non-overlapping group inside overlapping group
target/arm: Implement v8.1M NOCP handling
target/arm: Implement v8.1M conditional-select insns
target/arm: Make the t32 insn[25:23]=111 group non-overlapping
target/arm: Don't allow BLX imm for M-profile
target/arm: Implement v8.1M branch-future insns (as NOPs)
target/arm: Implement v8.1M low-overhead-loop instructions
target/arm: Fix has_vfp/has_neon ID reg squashing for M-profile
target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16
target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extension
Philippe Mathieu-Daudé (10):
hw/arm/strongarm: Fix 'time to transmit a char' unit comment
hw/arm: Restrict APEI tables generation to the 'virt' machine
hw/timer/bcm2835: Introduce BCM2835_SYSTIMER_COUNT definition
hw/timer/bcm2835: Rename variable holding CTRL_STATUS register
hw/timer/bcm2835: Support the timer COMPARE registers
hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs
hw/intc/bcm2835_ic: Trace GPU/CPU IRQ handlers
hw/intc/bcm2836_control: Use IRQ definitions instead of magic numbers
hw/arm/nseries: Fix loading kernel image on n8x0 machines
linux-user/elfload: Avoid leaking interp_name using GLib memory API
Richard Henderson (16):
accel/tcg: Add tlb_flush_page_bits_by_mmuidx*
target/arm: Use tlb_flush_page_bits_by_mmuidx*
target/arm: Remove redundant mmu_idx lookup
target/arm: Fix reported EL for mte_check_fail
target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11
linux-user/aarch64: Reset btype for signals
linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI
include/elf: Add defines related to GNU property notes for AArch64
linux-user/elfload: Fix coding style in load_elf_image
linux-user/elfload: Adjust iteration over phdr
linux-user/elfload: Move PT_INTERP detection to first loop
linux-user/elfload: Use Error for load_elf_image
linux-user/elfload: Use Error for load_elf_interp
linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes
linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND
tests/tcg/aarch64: Add bti smoke tests
docs/devel/loads-stores.rst | 8 +-
default-configs/devices/arm-softmmu.mak | 1 -
include/elf.h | 22 ++
include/exec/cpu-all.h | 2 +
include/exec/exec-all.h | 36 ++
include/hw/timer/bcm2835_systmr.h | 17 +-
linux-user/qemu.h | 4 +
linux-user/syscall_defs.h | 4 +
target/arm/cpu.h | 13 +
target/arm/helper.h | 13 +
target/arm/internals.h | 9 +-
target/arm/m-nocp.decode | 10 +-
target/arm/t32.decode | 50 ++-
accel/tcg/cputlb.c | 275 +++++++++++++++-
hw/arm/bcm2835_peripherals.c | 13 +-
hw/arm/nseries.c | 1 +
hw/arm/strongarm.c | 2 +-
hw/i2c/microbit_i2c.c | 1 +
hw/intc/bcm2835_ic.c | 4 +-
hw/intc/bcm2836_control.c | 8 +-
hw/timer/bcm2835_systmr.c | 57 ++--
linux-user/aarch64/signal.c | 10 +-
linux-user/elfload.c | 326 ++++++++++++++----
linux-user/mmap.c | 16 +
target/arm/cpu.c | 38 ++-
target/arm/helper.c | 55 +++-
target/arm/mte_helper.c | 13 +-
target/arm/translate-a64.c | 6 +-
target/arm/translate.c | 239 +++++++++++++-
target/arm/vfp_helper.c | 76 +++--
tests/qtest/npcm7xx_timer-test.c | 562 ++++++++++++++++++++++++++++++++
tests/tcg/aarch64/bti-1.c | 62 ++++
tests/tcg/aarch64/bti-2.c | 108 ++++++
tests/tcg/aarch64/bti-crt.inc.c | 51 +++
hw/arm/Kconfig | 1 +
hw/intc/trace-events | 4 +
hw/timer/trace-events | 6 +-
scripts/decodetree.py | 2 +-
target/arm/translate-vfp.c.inc | 41 ++-
tests/qtest/meson.build | 1 +
tests/tcg/aarch64/Makefile.target | 10 +
tests/tcg/configure.sh | 4 +
42 files changed, 1973 insertions(+), 208 deletions(-)
create mode 100644 tests/qtest/npcm7xx_timer-test.c
create mode 100644 tests/tcg/aarch64/bti-1.c
create mode 100644 tests/tcg/aarch64/bti-2.c
create mode 100644 tests/tcg/aarch64/bti-crt.inc.c
next reply other threads:[~2020-10-20 15:58 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 15:56 Peter Maydell [this message]
2020-10-20 15:56 ` [PULL 01/41] target/arm: Fix SMLAD incorrect setting of Q bit Peter Maydell
2020-10-20 15:56 ` [PULL 02/41] target/arm: AArch32 VCVT fixed-point to float is always round-to-nearest Peter Maydell
2020-10-20 15:56 ` [PULL 03/41] hw/arm/strongarm: Fix 'time to transmit a char' unit comment Peter Maydell
2020-10-20 15:56 ` [PULL 04/41] hw/arm: Restrict APEI tables generation to the 'virt' machine Peter Maydell
2020-10-20 15:56 ` [PULL 05/41] hw/timer/bcm2835: Introduce BCM2835_SYSTIMER_COUNT definition Peter Maydell
2020-10-20 15:56 ` [PULL 06/41] hw/timer/bcm2835: Rename variable holding CTRL_STATUS register Peter Maydell
2020-10-20 15:56 ` [PULL 07/41] hw/timer/bcm2835: Support the timer COMPARE registers Peter Maydell
2020-10-20 15:56 ` [PULL 08/41] hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs Peter Maydell
2020-10-20 15:56 ` [PULL 09/41] accel/tcg: Add tlb_flush_page_bits_by_mmuidx* Peter Maydell
2020-10-20 15:56 ` [PULL 10/41] target/arm: Use tlb_flush_page_bits_by_mmuidx* Peter Maydell
2020-10-20 15:56 ` [PULL 11/41] tests/qtest: Add npcm7xx timer test Peter Maydell
2020-10-20 15:56 ` [PULL 12/41] loads-stores.rst: add footnote that clarifies GETPC usage Peter Maydell
2020-10-20 15:56 ` [PULL 13/41] hw/intc/bcm2835_ic: Trace GPU/CPU IRQ handlers Peter Maydell
2020-10-20 15:56 ` [PULL 14/41] hw/intc/bcm2836_control: Use IRQ definitions instead of magic numbers Peter Maydell
2020-10-20 15:56 ` [PULL 15/41] target/arm: Remove redundant mmu_idx lookup Peter Maydell
2020-10-20 15:56 ` [PULL 16/41] target/arm: Fix reported EL for mte_check_fail Peter Maydell
2020-10-20 15:56 ` [PULL 17/41] target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11 Peter Maydell
2020-10-20 15:56 ` [PULL 18/41] microbit_i2c: Fix coredump when dump-vmstate Peter Maydell
2020-10-20 15:56 ` [PULL 19/41] hw/arm/nseries: Fix loading kernel image on n8x0 machines Peter Maydell
2020-10-20 15:56 ` [PULL 20/41] decodetree: Fix codegen for non-overlapping group inside overlapping group Peter Maydell
2020-10-20 15:56 ` [PULL 21/41] target/arm: Implement v8.1M NOCP handling Peter Maydell
2020-10-20 15:56 ` [PULL 22/41] target/arm: Implement v8.1M conditional-select insns Peter Maydell
2020-10-20 15:56 ` [PULL 23/41] target/arm: Make the t32 insn[25:23]=111 group non-overlapping Peter Maydell
2020-10-20 15:56 ` [PULL 24/41] target/arm: Don't allow BLX imm for M-profile Peter Maydell
2020-10-20 15:56 ` [PULL 25/41] target/arm: Implement v8.1M branch-future insns (as NOPs) Peter Maydell
2020-10-20 15:56 ` [PULL 26/41] target/arm: Implement v8.1M low-overhead-loop instructions Peter Maydell
2020-10-20 15:56 ` [PULL 27/41] target/arm: Fix has_vfp/has_neon ID reg squashing for M-profile Peter Maydell
2020-10-20 15:56 ` [PULL 28/41] target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16 Peter Maydell
2020-10-20 15:56 ` [PULL 29/41] target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extension Peter Maydell
2020-10-20 15:56 ` [PULL 30/41] linux-user/aarch64: Reset btype for signals Peter Maydell
2020-10-20 15:56 ` [PULL 31/41] linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI Peter Maydell
2020-10-20 15:56 ` [PULL 32/41] include/elf: Add defines related to GNU property notes for AArch64 Peter Maydell
2020-10-20 15:56 ` [PULL 33/41] linux-user/elfload: Avoid leaking interp_name using GLib memory API Peter Maydell
2020-10-20 15:56 ` [PULL 34/41] linux-user/elfload: Fix coding style in load_elf_image Peter Maydell
2020-10-20 15:56 ` [PULL 35/41] linux-user/elfload: Adjust iteration over phdr Peter Maydell
2020-10-20 15:56 ` [PULL 36/41] linux-user/elfload: Move PT_INTERP detection to first loop Peter Maydell
2020-10-20 15:56 ` [PULL 37/41] linux-user/elfload: Use Error for load_elf_image Peter Maydell
2020-10-20 15:56 ` [PULL 38/41] linux-user/elfload: Use Error for load_elf_interp Peter Maydell
2020-10-20 15:56 ` [PULL 39/41] linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes Peter Maydell
2020-10-20 15:56 ` [PULL 40/41] linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND Peter Maydell
2020-10-20 15:56 ` [PULL 41/41] tests/tcg/aarch64: Add bti smoke tests Peter Maydell
2020-10-20 16:36 ` [PULL 00/41] target-arm queue Philippe Mathieu-Daudé
2020-10-20 16:36 ` no-reply
-- strict thread matches above, loose matches on Subject: below --
2024-01-11 11:04 Peter Maydell
2024-01-11 15:16 ` Peter Maydell
2023-10-27 14:39 Peter Maydell
2023-10-29 23:15 ` Stefan Hajnoczi
2023-10-30 10:09 ` Peter Maydell
2023-10-30 22:09 ` Stefan Hajnoczi
2023-11-02 11:08 ` Peter Maydell
2023-10-31 7:51 ` Stefan Hajnoczi
2019-10-22 13:30 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201020155656.8045-1-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).