qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 29/41] target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extension
Date: Tue, 20 Oct 2020 16:56:44 +0100	[thread overview]
Message-ID: <20201020155656.8045-30-peter.maydell@linaro.org> (raw)
In-Reply-To: <20201020155656.8045-1-peter.maydell@linaro.org>

If the M-profile low-overhead-branch extension is implemented, FPSCR
bits [18:16] are a new field LTPSIZE.  If MVE is not implemented
(currently always true for us) then this field always reads as 4 and
ignores writes.

These bits used to be the vector-length field for the old
short-vector extension, so we need to take care that they are not
misinterpreted as setting vec_len. We do this with a rearrangement
of the vfp_set_fpscr() code that deals with vec_len, vec_stride
and also the QC bit; this obviates the need for the M-profile
only masking step that we used to have at the start of the function.

We provide a new field in CPUState for LTPSIZE, even though this
will always be 4, in preparation for MVE, so we don't have to
come back later and split it out of the vfp.xregs[FPSCR] value.
(This state struct field will be saved and restored as part of
the FPSCR value via the vmstate_fpscr in machine.c.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-11-peter.maydell@linaro.org
---
 target/arm/cpu.h        | 1 +
 target/arm/cpu.c        | 9 +++++++++
 target/arm/vfp_helper.c | 6 ++++++
 3 files changed, 16 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a432f301f11..49cd5cabcf2 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -549,6 +549,7 @@ typedef struct CPUARMState {
         uint32_t fpdscr[M_REG_NUM_BANKS];
         uint32_t cpacr[M_REG_NUM_BANKS];
         uint32_t nsacr;
+        int ltpsize;
     } v7m;
 
     /* Information associated with an exception about to be taken:
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 186ee621a65..07492e9f9a4 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -255,6 +255,15 @@ static void arm_cpu_reset(DeviceState *dev)
         uint8_t *rom;
         uint32_t vecbase;
 
+        if (cpu_isar_feature(aa32_lob, cpu)) {
+            /*
+             * LTPSIZE is constant 4 if MVE not implemented, and resets
+             * to an UNKNOWN value if MVE is implemented. We choose to
+             * always reset to 4.
+             */
+            env->v7m.ltpsize = 4;
+        }
+
         if (arm_feature(env, ARM_FEATURE_M_SECURITY)) {
             env->v7m.secure = true;
         } else {
diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c
index 364856498c4..01b9d8557f7 100644
--- a/target/arm/vfp_helper.c
+++ b/target/arm/vfp_helper.c
@@ -174,6 +174,12 @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env)
             | (env->vfp.vec_len << 16)
             | (env->vfp.vec_stride << 20);
 
+    /*
+     * M-profile LTPSIZE overlaps A-profile Stride; whichever of the
+     * two is not applicable to this CPU will always be zero.
+     */
+    fpscr |= env->v7m.ltpsize << 16;
+
     fpscr |= vfp_get_fpscr_from_host(env);
 
     i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3];
-- 
2.20.1



  parent reply	other threads:[~2020-10-20 16:30 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-20 15:56 [PULL 00/41] target-arm queue Peter Maydell
2020-10-20 15:56 ` [PULL 01/41] target/arm: Fix SMLAD incorrect setting of Q bit Peter Maydell
2020-10-20 15:56 ` [PULL 02/41] target/arm: AArch32 VCVT fixed-point to float is always round-to-nearest Peter Maydell
2020-10-20 15:56 ` [PULL 03/41] hw/arm/strongarm: Fix 'time to transmit a char' unit comment Peter Maydell
2020-10-20 15:56 ` [PULL 04/41] hw/arm: Restrict APEI tables generation to the 'virt' machine Peter Maydell
2020-10-20 15:56 ` [PULL 05/41] hw/timer/bcm2835: Introduce BCM2835_SYSTIMER_COUNT definition Peter Maydell
2020-10-20 15:56 ` [PULL 06/41] hw/timer/bcm2835: Rename variable holding CTRL_STATUS register Peter Maydell
2020-10-20 15:56 ` [PULL 07/41] hw/timer/bcm2835: Support the timer COMPARE registers Peter Maydell
2020-10-20 15:56 ` [PULL 08/41] hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs Peter Maydell
2020-10-20 15:56 ` [PULL 09/41] accel/tcg: Add tlb_flush_page_bits_by_mmuidx* Peter Maydell
2020-10-20 15:56 ` [PULL 10/41] target/arm: Use tlb_flush_page_bits_by_mmuidx* Peter Maydell
2020-10-20 15:56 ` [PULL 11/41] tests/qtest: Add npcm7xx timer test Peter Maydell
2020-10-20 15:56 ` [PULL 12/41] loads-stores.rst: add footnote that clarifies GETPC usage Peter Maydell
2020-10-20 15:56 ` [PULL 13/41] hw/intc/bcm2835_ic: Trace GPU/CPU IRQ handlers Peter Maydell
2020-10-20 15:56 ` [PULL 14/41] hw/intc/bcm2836_control: Use IRQ definitions instead of magic numbers Peter Maydell
2020-10-20 15:56 ` [PULL 15/41] target/arm: Remove redundant mmu_idx lookup Peter Maydell
2020-10-20 15:56 ` [PULL 16/41] target/arm: Fix reported EL for mte_check_fail Peter Maydell
2020-10-20 15:56 ` [PULL 17/41] target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11 Peter Maydell
2020-10-20 15:56 ` [PULL 18/41] microbit_i2c: Fix coredump when dump-vmstate Peter Maydell
2020-10-20 15:56 ` [PULL 19/41] hw/arm/nseries: Fix loading kernel image on n8x0 machines Peter Maydell
2020-10-20 15:56 ` [PULL 20/41] decodetree: Fix codegen for non-overlapping group inside overlapping group Peter Maydell
2020-10-20 15:56 ` [PULL 21/41] target/arm: Implement v8.1M NOCP handling Peter Maydell
2020-10-20 15:56 ` [PULL 22/41] target/arm: Implement v8.1M conditional-select insns Peter Maydell
2020-10-20 15:56 ` [PULL 23/41] target/arm: Make the t32 insn[25:23]=111 group non-overlapping Peter Maydell
2020-10-20 15:56 ` [PULL 24/41] target/arm: Don't allow BLX imm for M-profile Peter Maydell
2020-10-20 15:56 ` [PULL 25/41] target/arm: Implement v8.1M branch-future insns (as NOPs) Peter Maydell
2020-10-20 15:56 ` [PULL 26/41] target/arm: Implement v8.1M low-overhead-loop instructions Peter Maydell
2020-10-20 15:56 ` [PULL 27/41] target/arm: Fix has_vfp/has_neon ID reg squashing for M-profile Peter Maydell
2020-10-20 15:56 ` [PULL 28/41] target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16 Peter Maydell
2020-10-20 15:56 ` Peter Maydell [this message]
2020-10-20 15:56 ` [PULL 30/41] linux-user/aarch64: Reset btype for signals Peter Maydell
2020-10-20 15:56 ` [PULL 31/41] linux-user: Set PAGE_TARGET_1 for TARGET_PROT_BTI Peter Maydell
2020-10-20 15:56 ` [PULL 32/41] include/elf: Add defines related to GNU property notes for AArch64 Peter Maydell
2020-10-20 15:56 ` [PULL 33/41] linux-user/elfload: Avoid leaking interp_name using GLib memory API Peter Maydell
2020-10-20 15:56 ` [PULL 34/41] linux-user/elfload: Fix coding style in load_elf_image Peter Maydell
2020-10-20 15:56 ` [PULL 35/41] linux-user/elfload: Adjust iteration over phdr Peter Maydell
2020-10-20 15:56 ` [PULL 36/41] linux-user/elfload: Move PT_INTERP detection to first loop Peter Maydell
2020-10-20 15:56 ` [PULL 37/41] linux-user/elfload: Use Error for load_elf_image Peter Maydell
2020-10-20 15:56 ` [PULL 38/41] linux-user/elfload: Use Error for load_elf_interp Peter Maydell
2020-10-20 15:56 ` [PULL 39/41] linux-user/elfload: Parse NT_GNU_PROPERTY_TYPE_0 notes Peter Maydell
2020-10-20 15:56 ` [PULL 40/41] linux-user/elfload: Parse GNU_PROPERTY_AARCH64_FEATURE_1_AND Peter Maydell
2020-10-20 15:56 ` [PULL 41/41] tests/tcg/aarch64: Add bti smoke tests Peter Maydell
2020-10-20 16:36 ` [PULL 00/41] target-arm queue Philippe Mathieu-Daudé
2020-10-20 16:36 ` no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201020155656.8045-30-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).