qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Zhang Han <zhanghan64@huawei.com>,
	Gerd Hoffmann <kraxel@redhat.com>,
	Markus Armbruster <armbru@redhat.com>
Subject: [PULL 26/30] audio: foo* bar" should be "foo *bar".
Date: Fri, 15 Jan 2021 14:21:42 +0100	[thread overview]
Message-ID: <20210115132146.1443592-27-kraxel@redhat.com> (raw)
In-Reply-To: <20210115132146.1443592-1-kraxel@redhat.com>

From: Zhang Han <zhanghan64@huawei.com>

transfer "foo* " to "foo *"

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-4-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 audio/coreaudio.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/audio/coreaudio.c b/audio/coreaudio.c
index 6ca0d79c1f5e..b7c02e0e516d 100644
--- a/audio/coreaudio.c
+++ b/audio/coreaudio.c
@@ -421,12 +421,12 @@ COREAUDIO_WRAPPER_FUNC(write, size_t, (HWVoiceOut *hw, void *buf, size_t size),
 /* callback to feed audiooutput buffer */
 static OSStatus audioDeviceIOProc(
     AudioDeviceID inDevice,
-    const AudioTimeStamp* inNow,
-    const AudioBufferList* inInputData,
-    const AudioTimeStamp* inInputTime,
-    AudioBufferList* outOutputData,
-    const AudioTimeStamp* inOutputTime,
-    void* hwptr)
+    const AudioTimeStamp *inNow,
+    const AudioBufferList *inInputData,
+    const AudioTimeStamp *inInputTime,
+    AudioBufferList *outOutputData,
+    const AudioTimeStamp *inOutputTime,
+    void *hwptr)
 {
     UInt32 frameCount, pending_frames;
     void *out = outOutputData->mBuffers[0].mData;
-- 
2.29.2



  parent reply	other threads:[~2021-01-15 13:47 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15 13:21 [PULL 00/30] Audio 20210115 patches Gerd Hoffmann
2021-01-15 13:21 ` [PULL 01/30] sdlaudio: remove leftover SDL1.2 code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 02/30] audio: fix bit-rotted code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 03/30] sdlaudio: add -audiodev sdl,out.buffer-count option Gerd Hoffmann
2021-01-15 13:21 ` [PULL 04/30] sdlaudio: don't start playback in init routine Gerd Hoffmann
2021-01-15 13:21 ` [PULL 05/30] sdlaudio: always clear the sample buffer Gerd Hoffmann
2021-01-15 13:21 ` [PULL 06/30] sdlaudio: fill remaining sample buffer with silence Gerd Hoffmann
2021-01-15 13:21 ` [PULL 07/30] sdlaudio: replace legacy functions with modern ones Gerd Hoffmann
2021-01-15 13:21 ` [PULL 08/30] audio: split pcm_ops function get_buffer_in Gerd Hoffmann
2021-01-15 13:21 ` [PULL 09/30] sdlaudio: add recording functions Gerd Hoffmann
2021-01-15 13:21 ` [PULL 10/30] audio: break generic buffer dependency on mixing-engine Gerd Hoffmann
2021-01-15 13:21 ` [PULL 11/30] sdlaudio: enable (in|out).mixing-engine=off Gerd Hoffmann
2021-01-15 13:21 ` [PULL 12/30] audio: remove remaining unused plive code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 13/30] paaudio: avoid to clip samples multiple times Gerd Hoffmann
2021-01-15 13:21 ` [PULL 14/30] paaudio: wait for PA_STREAM_READY in qpa_write() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 15/30] paaudio: wait until the playback stream is ready Gerd Hoffmann
2021-01-15 13:21 ` [PULL 16/30] paaudio: remove unneeded code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 17/30] paaudio: comment bugs in functions qpa_init_* Gerd Hoffmann
2021-01-15 13:21 ` [PULL 18/30] paaudio: limit minreq to 75% of audio timer_rate Gerd Hoffmann
2021-01-15 13:21 ` [PULL 19/30] paaudio: send recorded data in smaller chunks Gerd Hoffmann
2021-01-15 13:21 ` [PULL 20/30] dsoundaudio: replace GetForegroundWindow() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 21/30] dsoundaudio: rename dsound_open() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 22/30] dsoundaudio: enable f32 audio sample format Gerd Hoffmann
2021-01-15 13:21 ` [PULL 23/30] dsoundaudio: fix log message Gerd Hoffmann
2021-01-15 13:21 ` [PULL 24/30] audio: Add braces for statements/fix braces' position Gerd Hoffmann
2021-01-15 13:21 ` [PULL 25/30] audio: Add spaces around operator/delete redundant spaces Gerd Hoffmann
2021-01-15 13:21 ` Gerd Hoffmann [this message]
2021-01-15 13:21 ` [PULL 27/30] audio: Fix lines over 90 characters Gerd Hoffmann
2021-01-15 13:21 ` [PULL 28/30] audio: Don't use '%#' in format strings Gerd Hoffmann
2021-01-15 13:21 ` [PULL 29/30] audio: Suspect code indent for conditional statements Gerd Hoffmann
2021-01-15 13:21 ` [PULL 30/30] audio: space prohibited between function name and parenthesis'(' Gerd Hoffmann
2021-01-15 14:24 ` [PULL 00/30] Audio 20210115 patches no-reply
2021-01-16 12:56 ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115132146.1443592-27-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=armbru@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=zhanghan64@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).