From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Zhang Han <zhanghan64@huawei.com>,
Gerd Hoffmann <kraxel@redhat.com>,
Markus Armbruster <armbru@redhat.com>
Subject: [PULL 27/30] audio: Fix lines over 90 characters
Date: Fri, 15 Jan 2021 14:21:43 +0100 [thread overview]
Message-ID: <20210115132146.1443592-28-kraxel@redhat.com> (raw)
In-Reply-To: <20210115132146.1443592-1-kraxel@redhat.com>
From: Zhang Han <zhanghan64@huawei.com>
Fix the line width of code.
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-5-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
audio/dsoundaudio.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/audio/dsoundaudio.c b/audio/dsoundaudio.c
index 21c2891772de..3b4afb949631 100644
--- a/audio/dsoundaudio.c
+++ b/audio/dsoundaudio.c
@@ -89,7 +89,9 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_ALLOCATED
case DSERR_ALLOCATED:
- str = "The request failed because resources, such as a priority level, were already in use by another caller";
+ str = "The request failed because resources, "
+ "such as a priority level, were already in use "
+ "by another caller";
break;
#endif
#ifdef DSERR_ALREADYINITIALIZED
@@ -104,7 +106,8 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_BADSENDBUFFERGUID
case DSERR_BADSENDBUFFERGUID:
- str = "The GUID specified in an audiopath file does not match a valid mix-in buffer";
+ str = "The GUID specified in an audiopath file "
+ "does not match a valid mix-in buffer";
break;
#endif
#ifdef DSERR_BUFFERLOST
@@ -114,22 +117,31 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_BUFFERTOOSMALL
case DSERR_BUFFERTOOSMALL:
- str = "The buffer size is not great enough to enable effects processing";
+ str = "The buffer size is not great enough to "
+ "enable effects processing";
break;
#endif
#ifdef DSERR_CONTROLUNAVAIL
case DSERR_CONTROLUNAVAIL:
- str = "The buffer control (volume, pan, and so on) requested by the caller is not available. Controls must be specified when the buffer is created, using the dwFlags member of DSBUFFERDESC";
+ str = "The buffer control (volume, pan, and so on) "
+ "requested by the caller is not available. "
+ "Controls must be specified when the buffer is created, "
+ "using the dwFlags member of DSBUFFERDESC";
break;
#endif
#ifdef DSERR_DS8_REQUIRED
case DSERR_DS8_REQUIRED:
- str = "A DirectSound object of class CLSID_DirectSound8 or later is required for the requested functionality. For more information, see IDirectSound8 Interface";
+ str = "A DirectSound object of class CLSID_DirectSound8 or later "
+ "is required for the requested functionality. "
+ "For more information, see IDirectSound8 Interface";
break;
#endif
#ifdef DSERR_FXUNAVAILABLE
case DSERR_FXUNAVAILABLE:
- str = "The effects requested could not be found on the system, or they are in the wrong order or in the wrong location; for example, an effect expected in hardware was found in software";
+ str = "The effects requested could not be found on the system, "
+ "or they are in the wrong order or in the wrong location; "
+ "for example, an effect expected in hardware "
+ "was found in software";
break;
#endif
#ifdef DSERR_GENERIC
@@ -154,7 +166,8 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_NODRIVER
case DSERR_NODRIVER:
- str = "No sound driver is available for use, or the given GUID is not a valid DirectSound device ID";
+ str = "No sound driver is available for use, "
+ "or the given GUID is not a valid DirectSound device ID";
break;
#endif
#ifdef DSERR_NOINTERFACE
@@ -169,12 +182,14 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_OTHERAPPHASPRIO
case DSERR_OTHERAPPHASPRIO:
- str = "Another application has a higher priority level, preventing this call from succeeding";
+ str = "Another application has a higher priority level, "
+ "preventing this call from succeeding";
break;
#endif
#ifdef DSERR_OUTOFMEMORY
case DSERR_OUTOFMEMORY:
- str = "The DirectSound subsystem could not allocate sufficient memory to complete the caller's request";
+ str = "The DirectSound subsystem could not allocate "
+ "sufficient memory to complete the caller's request";
break;
#endif
#ifdef DSERR_PRIOLEVELNEEDED
@@ -189,7 +204,9 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_UNINITIALIZED
case DSERR_UNINITIALIZED:
- str = "The Initialize method has not been called or has not been called successfully before other methods were called";
+ str = "The Initialize method has not been called "
+ "or has not been called successfully "
+ "before other methods were called";
break;
#endif
#ifdef DSERR_UNSUPPORTED
--
2.29.2
next prev parent reply other threads:[~2021-01-15 14:01 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 13:21 [PULL 00/30] Audio 20210115 patches Gerd Hoffmann
2021-01-15 13:21 ` [PULL 01/30] sdlaudio: remove leftover SDL1.2 code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 02/30] audio: fix bit-rotted code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 03/30] sdlaudio: add -audiodev sdl,out.buffer-count option Gerd Hoffmann
2021-01-15 13:21 ` [PULL 04/30] sdlaudio: don't start playback in init routine Gerd Hoffmann
2021-01-15 13:21 ` [PULL 05/30] sdlaudio: always clear the sample buffer Gerd Hoffmann
2021-01-15 13:21 ` [PULL 06/30] sdlaudio: fill remaining sample buffer with silence Gerd Hoffmann
2021-01-15 13:21 ` [PULL 07/30] sdlaudio: replace legacy functions with modern ones Gerd Hoffmann
2021-01-15 13:21 ` [PULL 08/30] audio: split pcm_ops function get_buffer_in Gerd Hoffmann
2021-01-15 13:21 ` [PULL 09/30] sdlaudio: add recording functions Gerd Hoffmann
2021-01-15 13:21 ` [PULL 10/30] audio: break generic buffer dependency on mixing-engine Gerd Hoffmann
2021-01-15 13:21 ` [PULL 11/30] sdlaudio: enable (in|out).mixing-engine=off Gerd Hoffmann
2021-01-15 13:21 ` [PULL 12/30] audio: remove remaining unused plive code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 13/30] paaudio: avoid to clip samples multiple times Gerd Hoffmann
2021-01-15 13:21 ` [PULL 14/30] paaudio: wait for PA_STREAM_READY in qpa_write() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 15/30] paaudio: wait until the playback stream is ready Gerd Hoffmann
2021-01-15 13:21 ` [PULL 16/30] paaudio: remove unneeded code Gerd Hoffmann
2021-01-15 13:21 ` [PULL 17/30] paaudio: comment bugs in functions qpa_init_* Gerd Hoffmann
2021-01-15 13:21 ` [PULL 18/30] paaudio: limit minreq to 75% of audio timer_rate Gerd Hoffmann
2021-01-15 13:21 ` [PULL 19/30] paaudio: send recorded data in smaller chunks Gerd Hoffmann
2021-01-15 13:21 ` [PULL 20/30] dsoundaudio: replace GetForegroundWindow() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 21/30] dsoundaudio: rename dsound_open() Gerd Hoffmann
2021-01-15 13:21 ` [PULL 22/30] dsoundaudio: enable f32 audio sample format Gerd Hoffmann
2021-01-15 13:21 ` [PULL 23/30] dsoundaudio: fix log message Gerd Hoffmann
2021-01-15 13:21 ` [PULL 24/30] audio: Add braces for statements/fix braces' position Gerd Hoffmann
2021-01-15 13:21 ` [PULL 25/30] audio: Add spaces around operator/delete redundant spaces Gerd Hoffmann
2021-01-15 13:21 ` [PULL 26/30] audio: foo* bar" should be "foo *bar" Gerd Hoffmann
2021-01-15 13:21 ` Gerd Hoffmann [this message]
2021-01-15 13:21 ` [PULL 28/30] audio: Don't use '%#' in format strings Gerd Hoffmann
2021-01-15 13:21 ` [PULL 29/30] audio: Suspect code indent for conditional statements Gerd Hoffmann
2021-01-15 13:21 ` [PULL 30/30] audio: space prohibited between function name and parenthesis'(' Gerd Hoffmann
2021-01-15 14:24 ` [PULL 00/30] Audio 20210115 patches no-reply
2021-01-16 12:56 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115132146.1443592-28-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=armbru@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=zhanghan64@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).