qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 12/33] target/arm: add ARMv8.4-SEL2 system registers
Date: Tue, 19 Jan 2021 15:10:43 +0000	[thread overview]
Message-ID: <20210119151104.16264-13-peter.maydell@linaro.org> (raw)
In-Reply-To: <20210119151104.16264-1-peter.maydell@linaro.org>

From: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-9-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/cpu.h    |  7 +++++++
 target/arm/helper.c | 24 ++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index cc1ea586c10..53d0e989f05 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -168,6 +168,11 @@ typedef struct {
     uint32_t base_mask;
 } TCR;
 
+#define VTCR_NSW (1u << 29)
+#define VTCR_NSA (1u << 30)
+#define VSTCR_SW VTCR_NSW
+#define VSTCR_SA VTCR_NSA
+
 /* Define a maximum sized vector register.
  * For 32-bit, this is a 128-bit NEON/AdvSIMD register.
  * For 64-bit, this is a 2048-bit SVE register.
@@ -325,9 +330,11 @@ typedef struct CPUARMState {
             uint64_t ttbr1_el[4];
         };
         uint64_t vttbr_el2; /* Virtualization Translation Table Base.  */
+        uint64_t vsttbr_el2; /* Secure Virtualization Translation Table. */
         /* MMU translation table base control. */
         TCR tcr_el[4];
         TCR vtcr_el2; /* Virtualization Translation Control.  */
+        TCR vstcr_el2; /* Secure Virtualization Translation Control. */
         uint32_t c2_data; /* MPU data cacheable bits.  */
         uint32_t c2_insn; /* MPU instruction cacheable bits.  */
         union { /* MMU domain access control register
diff --git a/target/arm/helper.c b/target/arm/helper.c
index a11a76adb8d..9a0b8c9aa0a 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -5722,6 +5722,27 @@ static const ARMCPRegInfo el2_v8_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri,
+                                  bool isread)
+{
+    if (arm_current_el(env) == 3 || arm_is_secure_below_el3(env)) {
+        return CP_ACCESS_OK;
+    }
+    return CP_ACCESS_TRAP_UNCATEGORIZED;
+}
+
+static const ARMCPRegInfo el2_sec_cp_reginfo[] = {
+    { .name = "VSTTBR_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 0,
+      .access = PL2_RW, .accessfn = sel2_access,
+      .fieldoffset = offsetof(CPUARMState, cp15.vsttbr_el2) },
+    { .name = "VSTCR_EL2", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 2,
+      .access = PL2_RW, .accessfn = sel2_access,
+      .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) },
+    REGINFO_SENTINEL
+};
+
 static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri,
                                    bool isread)
 {
@@ -7734,6 +7755,9 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         if (arm_feature(env, ARM_FEATURE_V8)) {
             define_arm_cp_regs(cpu, el2_v8_cp_reginfo);
         }
+        if (cpu_isar_feature(aa64_sel2, cpu)) {
+            define_arm_cp_regs(cpu, el2_sec_cp_reginfo);
+        }
         /* RVBAR_EL2 is only implemented if EL2 is the highest EL */
         if (!arm_feature(env, ARM_FEATURE_EL3)) {
             ARMCPRegInfo rvbar = {
-- 
2.20.1



  parent reply	other threads:[~2021-01-19 15:21 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-19 15:10 [PULL 00/33] target-arm queue Peter Maydell
2021-01-19 15:10 ` [PULL 01/33] target/arm: Implement an IMPDEF pauth algorithm Peter Maydell
2021-01-19 15:10 ` [PULL 02/33] target/arm: Add cpu properties to control pauth Peter Maydell
2021-01-19 15:10 ` [PULL 03/33] target/arm: Use object_property_add_bool for "sve" property Peter Maydell
2021-01-19 15:10 ` [PULL 04/33] target/arm: remove redundant tests Peter Maydell
2021-01-19 15:10 ` [PULL 05/33] target/arm: add arm_is_el2_enabled() helper Peter Maydell
2021-01-19 15:10 ` [PULL 06/33] target/arm: use arm_is_el2_enabled() where applicable Peter Maydell
2021-01-19 15:10 ` [PULL 07/33] target/arm: use arm_hcr_el2_eff() " Peter Maydell
2021-01-19 15:10 ` [PULL 08/33] target/arm: factor MDCR_EL2 common handling Peter Maydell
2021-01-19 15:10 ` [PULL 09/33] target/arm: Define isar_feature function to test for presence of SEL2 Peter Maydell
2021-01-19 15:10 ` [PULL 10/33] target/arm: add 64-bit S-EL2 to EL exception table Peter Maydell
2021-01-19 15:10 ` [PULL 11/33] target/arm: add MMU stage 1 for Secure EL2 Peter Maydell
2021-01-19 15:10 ` Peter Maydell [this message]
2021-01-19 15:10 ` [PULL 13/33] target/arm: handle VMID change in secure state Peter Maydell
2021-01-19 15:10 ` [PULL 14/33] target/arm: do S1_ptw_translate() before address space lookup Peter Maydell
2021-01-19 15:10 ` [PULL 15/33] target/arm: translate NS bit in page-walks Peter Maydell
2021-01-19 15:10 ` [PULL 16/33] target/arm: generalize 2-stage page-walk condition Peter Maydell
2021-01-19 15:10 ` [PULL 17/33] target/arm: secure stage 2 translation regime Peter Maydell
2021-01-19 15:10 ` [PULL 18/33] target/arm: set HPFAR_EL2.NS on secure stage 2 faults Peter Maydell
2021-01-19 15:10 ` [PULL 19/33] target/arm: revector to run-time pick target EL Peter Maydell
2021-01-19 15:10 ` [PULL 20/33] target/arm: Implement SCR_EL2.EEL2 Peter Maydell
2021-01-19 15:10 ` [PULL 21/33] target/arm: enable Secure EL2 in max CPU Peter Maydell
2021-01-19 15:10 ` [PULL 22/33] target/arm: refactor vae1_tlbmask() Peter Maydell
2021-01-19 15:10 ` [PULL 23/33] target/arm: Introduce PREDDESC field definitions Peter Maydell
2021-01-19 15:10 ` [PULL 24/33] target/arm: Update PFIRST, PNEXT for pred_desc Peter Maydell
2021-01-19 15:10 ` [PULL 25/33] target/arm: Update ZIP, UZP, TRN " Peter Maydell
2021-01-19 15:10 ` [PULL 26/33] target/arm: Update REV, PUNPK " Peter Maydell
2021-01-19 15:10 ` [PULL 27/33] hw/misc/pvpanic: split-out generic and bus dependent code Peter Maydell
2021-01-19 15:10 ` [PULL 28/33] hw/misc/pvpanic: add PCI interface support Peter Maydell
2021-01-19 15:11 ` [PULL 29/33] pvpanic : update pvpanic spec document Peter Maydell
2021-01-19 15:11 ` [PULL 30/33] tests/qtest: add a test case for pvpanic-pci Peter Maydell
2021-01-19 15:11 ` [PULL 31/33] npcm7xx_adc-test: Fix memleak in adc_qom_set Peter Maydell
2021-01-19 15:11 ` [PULL 32/33] target/arm/m_helper: Silence GCC 10 maybe-uninitialized error Peter Maydell
2021-01-19 15:11 ` [PULL 33/33] docs: Build and install all the docs in a single manual Peter Maydell
2021-01-19 16:00 ` [PULL 00/33] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210119151104.16264-13-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).