From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Thomas Huth" <thuth@redhat.com>,
qemu-arm@nongnu.org,
"Richard Henderson" <richard.henderson@linaro.org>,
"Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: [PATCH 2/5] hw/arm: Restrict ARMv7 A-profile cpus to TCG accel
Date: Sun, 31 Jan 2021 17:44:03 +0100 [thread overview]
Message-ID: <20210131164406.349825-3-f4bug@amsat.org> (raw)
In-Reply-To: <20210131164406.349825-1-f4bug@amsat.org>
KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").
The following machines are no more built when TCG is disabled:
- cubieboard cubietech cubieboard (Cortex-A8)
- mcimx6ul-evk Freescale i.MX6UL Evaluation Kit (Cortex A7)
- mcimx7d-sabre Freescale i.MX7 DUAL SABRE (Cortex A7)
- npcm750-evb Nuvoton NPCM750 Evaluation Board (Cortex A9)
- nuri Samsung NURI board (Exynos4210)
- orangepi-pc Orange Pi PC (Cortex-A7)
- quanta-gsj Quanta GSJ (Cortex A9)
- realview-pb-a8 ARM RealView Platform Baseboard for Cortex-A8
- realview-pbx-a9 ARM RealView Platform Baseboard Explore for Cortex-A9
- sabrelite Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)
- smdkc210 Samsung SMDKC210 board (Exynos4210)
- vexpress-a15 ARM Versatile Express for Cortex-A15
- vexpress-a9 ARM Versatile Express for Cortex-A9
- xilinx-zynq-a9 Xilinx Zynq Platform Baseboard for Cortex-A9
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
default-configs/devices/arm-softmmu.mak | 10 ----------
hw/arm/Kconfig | 11 +++++++++++
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/default-configs/devices/arm-softmmu.mak b/default-configs/devices/arm-softmmu.mak
index 7d55c156bab..1ffa3dbe4bf 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -3,13 +3,3 @@
# CONFIG_PCI_DEVICES=n
# CONFIG_TEST_DEVICES=n
-CONFIG_CUBIEBOARD=y
-CONFIG_EXYNOS4=y
-CONFIG_REALVIEW=y
-CONFIG_VEXPRESS=y
-CONFIG_ZYNQ=y
-CONFIG_NPCM7XX=y
-CONFIG_SABRELITE=y
-CONFIG_FSL_IMX7=y
-CONFIG_FSL_IMX6UL=y
-CONFIG_ALLWINNER_H3=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 043710be3df..263f22a80c1 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -39,6 +39,7 @@ config CHEETAH
config CUBIEBOARD
bool
+ default y if TCG && ARM
select ALLWINNER_A10
config DIGIC
@@ -50,6 +51,7 @@ config DIGIC
config EXYNOS4
bool
+ default y if TCG && ARM
select A9MPCORE
select I2C
select LAN9118
@@ -198,6 +200,7 @@ config Z2
config REALVIEW
bool
+ default y if TCG && ARM
imply PCI_DEVICES
imply PCI_TESTDEV
select SMC91C111
@@ -241,6 +244,7 @@ config SBSA_REF
config SABRELITE
bool
+ default y if TCG && ARM
select FSL_IMX6
select SSI_M25P80
@@ -292,6 +296,7 @@ config VERSATILE
config VEXPRESS
bool
+ default y if TCG && ARM
select A9MPCORE
select A15MPCORE
select ARM_MPTIMER
@@ -307,6 +312,7 @@ config VEXPRESS
config ZYNQ
bool
+ default y if TCG && ARM
select A9MPCORE
select CADENCE # UART
select PFLASH_CFI02
@@ -331,6 +337,7 @@ config ALLWINNER_A10
config ALLWINNER_H3
bool
+ default y if TCG && ARM
select ALLWINNER_A10_PIT
select ALLWINNER_SUN8I_EMAC
select SERIAL
@@ -395,6 +402,7 @@ config XLNX_VERSAL
config NPCM7XX
bool
+ default y if TCG && ARM
select A9MPCORE
select ARM_GIC
select PL310 # cache controller
@@ -424,6 +432,7 @@ config FSL_IMX31
config FSL_IMX6
bool
+ default y if TCG && ARM
select A9MPCORE
select IMX
select IMX_FEC
@@ -467,6 +476,7 @@ config MPS2
config FSL_IMX7
bool
+ default y if TCG && ARM
imply PCI_DEVICES
imply TEST_DEVICES
select A15MPCORE
@@ -484,6 +494,7 @@ config ARM_SMMUV3
config FSL_IMX6UL
bool
+ default y if TCG && ARM
select A15MPCORE
select IMX
select IMX_FEC
--
2.26.2
next prev parent reply other threads:[~2021-01-31 16:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-31 16:44 [PATCH 0/5] target/arm: Restrict v7A TCG cpus to TCG accel Philippe Mathieu-Daudé
2021-01-31 16:44 ` [PATCH 1/5] hw/arm: Use Kconfig 'default y' syntax instead of default-configs Philippe Mathieu-Daudé
2021-02-02 16:12 ` Peter Maydell
2021-01-31 16:44 ` Philippe Mathieu-Daudé [this message]
2021-01-31 18:33 ` [PATCH 2/5] hw/arm: Restrict ARMv7 A-profile cpus to TCG accel Philippe Mathieu-Daudé
2021-01-31 16:44 ` [PATCH 3/5] target/arm: Restrict v8M IDAU to TCG Philippe Mathieu-Daudé
2021-02-02 16:14 ` Peter Maydell
2021-01-31 16:44 ` [PATCH 4/5] target/arm/cpu: Update coding style to make checkpatch.pl happy Philippe Mathieu-Daudé
2021-02-02 16:14 ` Peter Maydell
2021-01-31 16:44 ` [PATCH 5/5] target/arm: Restrict v7A TCG cpus to TCG accel Philippe Mathieu-Daudé
2021-02-02 16:17 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210131164406.349825-3-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).