QEMU-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: qemu-devel@nongnu.org, pbonzini@redhat.com, fam@euphon.net,
	laurent@vivier.eu
Subject: [PATCH v3 12/42] esp: remove dma_counter from ESPState
Date: Thu,  4 Mar 2021 22:10:33 +0000
Message-ID: <20210304221103.6369-13-mark.cave-ayland@ilande.co.uk> (raw)
In-Reply-To: <20210304221103.6369-1-mark.cave-ayland@ilande.co.uk>

The value of dma_counter is set once at the start of the transfer and remains
the same until the transfer is complete. This allows the check in esp_transfer_data
to be simplified since dma_left will always be non-zero until the transfer is
completed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
---
 hw/scsi/esp.c         | 4 +---
 include/hw/scsi/esp.h | 3 ---
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/hw/scsi/esp.c b/hw/scsi/esp.c
index 349067eb6a..15c4c33052 100644
--- a/hw/scsi/esp.c
+++ b/hw/scsi/esp.c
@@ -229,7 +229,6 @@ static void do_busid_cmd(ESPState *s, uint8_t *buf, uint8_t busid)
     if (datalen != 0) {
         s->rregs[ESP_RSTAT] = STAT_TC;
         s->dma_left = 0;
-        s->dma_counter = 0;
         if (datalen > 0) {
             s->rregs[ESP_RSTAT] |= STAT_DI;
         } else {
@@ -542,7 +541,7 @@ void esp_transfer_data(SCSIRequest *req, uint32_t len)
     s->async_buf = scsi_req_get_buf(req);
     if (s->dma_left) {
         esp_do_dma(s);
-    } else if (s->dma_counter != 0 && s->ti_size <= 0) {
+    } else if (s->ti_size <= 0) {
         /*
          * If this was the last part of a DMA transfer then the
          * completion interrupt is deferred to here.
@@ -561,7 +560,6 @@ static void handle_ti(ESPState *s)
     }
 
     dmalen = esp_get_tc(s);
-    s->dma_counter = dmalen;
 
     if (s->do_cmd) {
         minlen = (dmalen < ESP_CMDBUF_SZ) ? dmalen : ESP_CMDBUF_SZ;
diff --git a/include/hw/scsi/esp.h b/include/hw/scsi/esp.h
index 9d149cbc9f..ff1372947b 100644
--- a/include/hw/scsi/esp.h
+++ b/include/hw/scsi/esp.h
@@ -50,9 +50,6 @@ struct ESPState {
 
     /* The amount of data left in the current DMA transfer.  */
     uint32_t dma_left;
-    /* The size of the current DMA transfer.  Zero if no transfer is in
-       progress.  */
-    uint32_t dma_counter;
     int dma_enabled;
 
     uint32_t async_len;
-- 
2.20.1



  parent reply index

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-04 22:10 [PATCH v3 00/42] esp: consolidate PDMA transfer buffers and other fixes Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 01/42] esp: checkpatch fixes Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 02/42] esp: rename existing ESP QOM type to SYSBUS_ESP Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 03/42] esp: QOMify the internal ESP device state Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 04/42] esp: add vmstate_esp version to embedded ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 05/42] esp: add trace event when receiving a TI command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 06/42] esp: fix esp_reg_read() trace event Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 07/42] esp: add PDMA trace events Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 08/42] esp: determine transfer direction directly from SCSI phase Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 09/42] esp: introduce esp_get_tc() and esp_set_tc() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 10/42] esp: introduce esp_get_stc() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 11/42] esp: apply transfer length adjustment when STC is zero at TC load time Mark Cave-Ayland
2021-03-04 22:10 ` Mark Cave-Ayland [this message]
2021-03-04 22:10 ` [PATCH v3 13/42] esp: remove dma_left from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 14/42] esp: remove minlen restriction in handle_ti Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 15/42] esp: introduce esp_pdma_read() and esp_pdma_write() functions Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 16/42] esp: use pdma_origin directly in esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 17/42] esp: move pdma_len and TC logic into esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 18/42] esp: accumulate SCSI commands for PDMA transfers in cmdbuf instead of pdma_buf Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 19/42] esp: remove buf parameter from do_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 20/42] esp: remove the buf and buflen parameters from get_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 21/42] esp: remove redundant pdma_start from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 22/42] esp: move PDMA length adjustments into esp_pdma_read()/esp_pdma_write() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 23/42] esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 24/42] esp: use in-built TC to determine PDMA transfer length Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 25/42] esp: remove CMD pdma_origin Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 26/42] esp: rename get_cmd_cb() to esp_select() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 27/42] esp: fix PDMA target selection Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 28/42] esp: use FIFO for PDMA transfers between initiator and device Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 29/42] esp: remove pdma_origin from ESPState Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 30/42] esp: add 4 byte PDMA read and write transfers Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 31/42] esp: implement FIFO flush command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 32/42] esp: latch individual bits in ESP_RINTR register Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 33/42] esp: defer command completion interrupt on incoming data transfers Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 34/42] esp: remove old deferred command completion mechanism Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 35/42] esp: raise interrupt after every non-DMA byte transferred to the FIFO Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 36/42] esp: add maxlen parameter to get_cmd() Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 37/42] esp: transition to message out phase after SATN and stop command Mark Cave-Ayland
2021-03-04 22:10 ` [PATCH v3 38/42] esp: convert ti_buf from array to Fifo8 Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 39/42] esp: convert cmdbuf " Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 40/42] esp: add trivial implementation of the ESP_RFLAGS register Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 41/42] esp: implement non-DMA transfers in PDMA mode Mark Cave-Ayland
2021-03-04 22:11 ` [PATCH v3 42/42] esp: add support for unaligned accesses Mark Cave-Ayland
2021-03-04 22:58 ` [PATCH v3 00/42] esp: consolidate PDMA transfer buffers and other fixes Philippe Mathieu-Daudé
2021-03-05  7:31   ` Mark Cave-Ayland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210304221103.6369-13-mark.cave-ayland@ilande.co.uk \
    --to=mark.cave-ayland@ilande.co.uk \
    --cc=fam@euphon.net \
    --cc=laurent@vivier.eu \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

QEMU-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/qemu-devel/0 qemu-devel/git/0.git
	git clone --mirror https://lore.kernel.org/qemu-devel/1 qemu-devel/git/1.git
	git clone --mirror https://lore.kernel.org/qemu-devel/2 qemu-devel/git/2.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 qemu-devel qemu-devel/ https://lore.kernel.org/qemu-devel \
		qemu-devel@nongnu.org
	public-inbox-index qemu-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.nongnu.qemu-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git