[v4 1/3] block/file-posix: Optimize for macOS

[v4 1/3] block/file-posix: Optimize for macOS

[Akihiko Odaki]

This commit introduces "punch hole" operation and optimizes transfer
block size for macOS.

Thanks to Konstantin Nazarov for detailed analysis of a flaw in an
old version of this change:
https://gist.github.com/akihikodaki/87df4149e7ca87f18dc56807ec5a1bc5#gistcomment-3654667

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
---
 block/file-posix.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/block/file-posix.c b/block/file-posix.c
index 05079b40cae..8f25e194fcd 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -44,6 +44,7 @@
 #if defined(__APPLE__) && (__MACH__)
 #include <paths.h>
 #include <sys/param.h>
+#include <sys/mount.h>
 #include <IOKit/IOKitLib.h>
 #include <IOKit/IOBSD.h>
 #include <IOKit/storage/IOMediaBSDClient.h>
@@ -1248,6 +1249,15 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
 {
     BDRVRawState *s = bs->opaque;
 
+#if defined(__APPLE__) && (__MACH__)
+    struct statfs buf;
+
+    if (!fstatfs(s->fd, &buf)) {
+        bs->bl.opt_transfer = buf.f_iosize;
+        bs->bl.pdiscard_alignment = buf.f_bsize;
+    }
+#endif
+
     if (bs->sg) {
         int ret = sg_get_max_transfer_length(s->fd);
 
@@ -1586,6 +1596,7 @@ out:
     }
 }
 
+#if defined(CONFIG_FALLOCATE) || defined(BLKZEROOUT)
 static int translate_err(int err)
 {
     if (err == -ENODEV || err == -ENOSYS || err == -EOPNOTSUPP ||
@@ -1594,6 +1605,7 @@ static int translate_err(int err)
     }
     return err;
 }
+#endif
 
 #ifdef CONFIG_FALLOCATE
 static int do_fallocate(int fd, int mode, off_t offset, off_t len)
@@ -1795,16 +1807,27 @@ static int handle_aiocb_discard(void *opaque)
             }
         } while (errno == EINTR);
 
-        ret = -errno;
+        ret = translate_err(-errno);
 #endif
     } else {
 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE
         ret = do_fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
                            aiocb->aio_offset, aiocb->aio_nbytes);
+        ret = translate_err(-errno);
+#elif defined(__APPLE__) && (__MACH__)
+        fpunchhole_t fpunchhole;
+        fpunchhole.fp_flags = 0;
+        fpunchhole.reserved = 0;
+        fpunchhole.fp_offset = aiocb->aio_offset;
+        fpunchhole.fp_length = aiocb->aio_nbytes;
+        if (fcntl(s->fd, F_PUNCHHOLE, &fpunchhole) == -1) {
+            ret = errno == ENODEV ? -ENOTSUP : -errno;
+        } else {
+            ret = 0;
+        }
 #endif
     }
 
-    ret = translate_err(ret);
     if (ret == -ENOTSUP) {
         s->has_discard = false;
     }
-- 
2.24.3 (Apple Git-128)

[v4 2/3] block: Add backend_defaults property

[Akihiko Odaki]

backend_defaults property allow users to control if default block
properties should be decided with backend information.

If it is off, any backend information will be discarded, which is
suitable if you plan to perform live migration to a different disk backend.

If it is on, a block device may utilize backend information more
aggressively.

By default, it is auto, which uses backend information for block
sizes and ignores the others, which is consistent with the older
versions.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
---
 hw/block/block.c         | 42 ++++++++++++++++++++++++++++++++++++----
 include/hw/block/block.h |  3 +++
 2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/hw/block/block.c b/hw/block/block.c
index 1e34573da71..d47ebf005ad 100644
--- a/hw/block/block.c
+++ b/hw/block/block.c
@@ -65,24 +65,58 @@ bool blkconf_blocksizes(BlockConf *conf, Error **errp)
 {
     BlockBackend *blk = conf->blk;
     BlockSizes blocksizes;
-    int backend_ret;
+    BlockDriverState *bs;
+    bool use_blocksizes;
+    bool use_bs;
+
+    switch (conf->backend_defaults) {
+    case ON_OFF_AUTO_AUTO:
+        use_blocksizes = !blk_probe_blocksizes(blk, &blocksizes);
+        use_bs = false;
+        break;
+
+    case ON_OFF_AUTO_ON:
+        use_blocksizes = !blk_probe_blocksizes(blk, &blocksizes);
+        bs = blk_bs(blk);
+        use_bs = bs;
+        break;
+
+    case ON_OFF_AUTO_OFF:
+        use_blocksizes = false;
+        use_bs = false;
+        break;
+
+    default:
+        abort();
+    }
 
-    backend_ret = blk_probe_blocksizes(blk, &blocksizes);
     /* fill in detected values if they are not defined via qemu command line */
     if (!conf->physical_block_size) {
-        if (!backend_ret) {
+        if (use_blocksizes) {
            conf->physical_block_size = blocksizes.phys;
         } else {
             conf->physical_block_size = BDRV_SECTOR_SIZE;
         }
     }
     if (!conf->logical_block_size) {
-        if (!backend_ret) {
+        if (use_blocksizes) {
             conf->logical_block_size = blocksizes.log;
         } else {
             conf->logical_block_size = BDRV_SECTOR_SIZE;
         }
     }
+    if (use_bs) {
+        if (!conf->opt_io_size) {
+            conf->opt_io_size = bs->bl.opt_transfer;
+        }
+        if (conf->discard_granularity == -1) {
+            if (bs->bl.pdiscard_alignment) {
+                conf->discard_granularity = bs->bl.pdiscard_alignment;
+            } else if (bs->bl.request_alignment != 1) {
+                conf->discard_granularity = bs->bl.request_alignment;
+            }
+        }
+    }
 
     if (conf->logical_block_size > conf->physical_block_size) {
         error_setg(errp,
diff --git a/include/hw/block/block.h b/include/hw/block/block.h
index c172cbe65f1..5902c0440a5 100644
--- a/include/hw/block/block.h
+++ b/include/hw/block/block.h
@@ -19,6 +19,7 @@
 
 typedef struct BlockConf {
     BlockBackend *blk;
+    OnOffAuto backend_defaults;
     uint32_t physical_block_size;
     uint32_t logical_block_size;
     uint32_t min_io_size;
@@ -48,6 +49,8 @@ static inline unsigned int get_physical_block_exp(BlockConf *conf)
 }
 
 #define DEFINE_BLOCK_PROPERTIES_BASE(_state, _conf)                     \
+    DEFINE_PROP_ON_OFF_AUTO("backend_defaults", _state,                 \
+                            _conf.backend_defaults, ON_OFF_AUTO_AUTO),  \
     DEFINE_PROP_BLOCKSIZE("logical_block_size", _state,                 \
                           _conf.logical_block_size),                    \
     DEFINE_PROP_BLOCKSIZE("physical_block_size", _state,                \
-- 
2.24.3 (Apple Git-128)

[v4 3/3] block/io: Merge discard request alignments

[Akihiko Odaki]

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
---
 block/io.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/io.c b/block/io.c
index ca2dca30070..aad74bd6714 100644
--- a/block/io.c
+++ b/block/io.c
@@ -124,6 +124,8 @@ void bdrv_parent_drained_begin_single(BdrvChild *c, bool poll)
 
 static void bdrv_merge_limits(BlockLimits *dst, const BlockLimits *src)
 {
+    dst->pdiscard_alignment = MAX(dst->pdiscard_alignment,
+                                  src->pdiscard_alignment);
     dst->opt_transfer = MAX(dst->opt_transfer, src->opt_transfer);
     dst->max_transfer = MIN_NON_ZERO(dst->max_transfer, src->max_transfer);
     dst->opt_mem_alignment = MAX(dst->opt_mem_alignment,
-- 
2.24.3 (Apple Git-128)