qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org, groug@kaod.org
Cc: Richard Henderson <richard.henderson@linaro.org>,
	qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [PULL 14/46] target/ppc: Create helper_scv
Date: Tue,  4 May 2021 15:52:40 +1000	[thread overview]
Message-ID: <20210504055312.306823-15-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20210504055312.306823-1-david@gibson.dropbear.id.au>

From: Richard Henderson <richard.henderson@linaro.org>

Perform the test against FSCR_SCV at runtime, in the helper.

This means we can remove the incorrect set against SCV in
ppc_tr_init_disas_context and do not need to add an HFLAGS bit.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-6-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 target/ppc/excp_helper.c |  9 +++++++++
 target/ppc/helper.h      |  1 +
 target/ppc/translate.c   | 20 +++++++-------------
 3 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c
index 85de7e6c90..5c95e0c103 100644
--- a/target/ppc/excp_helper.c
+++ b/target/ppc/excp_helper.c
@@ -1130,6 +1130,15 @@ void helper_store_msr(CPUPPCState *env, target_ulong val)
 }
 
 #if defined(TARGET_PPC64)
+void helper_scv(CPUPPCState *env, uint32_t lev)
+{
+    if (env->spr[SPR_FSCR] & (1ull << FSCR_SCV)) {
+        raise_exception_err(env, POWERPC_EXCP_SYSCALL_VECTORED, lev);
+    } else {
+        raise_exception_err(env, POWERPC_EXCP_FU, FSCR_IC_SCV);
+    }
+}
+
 void helper_pminsn(CPUPPCState *env, powerpc_pm_insn_t insn)
 {
     CPUState *cs;
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index 6a4dccf70c..513066d54d 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -13,6 +13,7 @@ DEF_HELPER_1(rfci, void, env)
 DEF_HELPER_1(rfdi, void, env)
 DEF_HELPER_1(rfmci, void, env)
 #if defined(TARGET_PPC64)
+DEF_HELPER_2(scv, noreturn, env, i32)
 DEF_HELPER_2(pminsn, void, env, i32)
 DEF_HELPER_1(rfid, void, env)
 DEF_HELPER_1(rfscv, void, env)
diff --git a/target/ppc/translate.c b/target/ppc/translate.c
index 7912495f28..d48c554290 100644
--- a/target/ppc/translate.c
+++ b/target/ppc/translate.c
@@ -173,7 +173,6 @@ struct DisasContext {
     bool vsx_enabled;
     bool spe_enabled;
     bool tm_enabled;
-    bool scv_enabled;
     bool gtse;
     ppc_spr_t *spr_cb; /* Needed to check rights for mfspr/mtspr */
     int singlestep_enabled;
@@ -4081,15 +4080,16 @@ static void gen_sc(DisasContext *ctx)
 #if !defined(CONFIG_USER_ONLY)
 static void gen_scv(DisasContext *ctx)
 {
-    uint32_t lev;
+    uint32_t lev = (ctx->opcode >> 5) & 0x7F;
 
-    if (unlikely(!ctx->scv_enabled)) {
-        gen_exception_err(ctx, POWERPC_EXCP_FU, FSCR_IC_SCV);
-        return;
+    /* Set the PC back to the faulting instruction. */
+    if (ctx->exception == POWERPC_EXCP_NONE) {
+        gen_update_nip(ctx, ctx->base.pc_next - 4);
     }
+    gen_helper_scv(cpu_env, tcg_constant_i32(lev));
 
-    lev = (ctx->opcode >> 5) & 0x7F;
-    gen_exception_err(ctx, POWERPC_SYSCALL_VECTORED, lev);
+    /* This need not be exact, just not POWERPC_EXCP_NONE */
+    ctx->exception = POWERPC_SYSCALL_VECTORED;
 }
 #endif
 #endif
@@ -7907,12 +7907,6 @@ static void ppc_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
     ctx->spe_enabled = (hflags >> HFLAGS_SPE) & 1;
     ctx->altivec_enabled = (hflags >> HFLAGS_VR) & 1;
     ctx->vsx_enabled = (hflags >> HFLAGS_VSX) & 1;
-    if ((env->flags & POWERPC_FLAG_SCV)
-        && (env->spr[SPR_FSCR] & (1ull << FSCR_SCV))) {
-        ctx->scv_enabled = true;
-    } else {
-        ctx->scv_enabled = false;
-    }
     ctx->tm_enabled = (hflags >> HFLAGS_TM) & 1;
     ctx->gtse = !!(env->spr[SPR_LPCR] & LPCR_GTSE);
 
-- 
2.31.1



  parent reply	other threads:[~2021-05-04  6:05 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-04  5:52 [PULL 00/46] ppc-for-6.1 queue 20210504 David Gibson
2021-05-04  5:52 ` [PULL 01/46] hw/ppc/mac_newworld: Restrict RAM to 2 GiB David Gibson
2021-05-04  5:52 ` [PULL 02/46] target/ppc: Move helper_regs.h functions out-of-line David Gibson
2021-05-04  5:52 ` [PULL 03/46] target/ppc: Move 601 hflags adjustment to hreg_compute_hflags David Gibson
2021-05-04  5:52 ` [PULL 04/46] target/ppc: Properly sync cpu state with new msr in cpu_load_old David Gibson
2021-05-04  5:52 ` [PULL 05/46] target/ppc: Do not call hreg_compute_mem_idx after ppc_store_msr David Gibson
2021-05-04  5:52 ` [PULL 06/46] target/ppc: Retain hflags_nmsr only for migration David Gibson
2021-05-04  5:52 ` [PULL 07/46] target/ppc: Fix comment for MSR_FE{0,1} David Gibson
2021-05-04  5:52 ` [PULL 08/46] hw/ppc/pnv_core: Update hflags after setting msr David Gibson
2021-05-04  5:52 ` [PULL 09/46] hw/ppc/spapr_rtas: " David Gibson
2021-05-04  5:52 ` [PULL 10/46] target/ppc: Extract post_load_update_msr David Gibson
2021-05-04  5:52 ` [PULL 11/46] target/ppc: Disconnect hflags from MSR David Gibson
2021-05-04  5:52 ` [PULL 12/46] target/ppc: Reduce env->hflags to uint32_t David Gibson
2021-05-04  5:52 ` [PULL 13/46] target/ppc: Put dbcr0 single-step bits into hflags David Gibson
2021-05-04  5:52 ` David Gibson [this message]
2021-05-04  5:52 ` [PULL 15/46] target/ppc: Put LPCR[GTSE] in hflags David Gibson
2021-05-04  5:52 ` [PULL 16/46] target/ppc: Remove MSR_SA and MSR_AP from hflags David Gibson
2021-05-04  5:52 ` [PULL 17/46] target/ppc: Remove env->immu_idx and env->dmmu_idx David Gibson
2021-05-04  5:52 ` [PULL 18/46] linux-user/ppc: Fix msr updates for signal handling David Gibson
2021-05-04  5:52 ` [PULL 19/46] target/ppc: Validate hflags with CONFIG_DEBUG_TCG David Gibson
2021-05-04  5:52 ` [PULL 20/46] vt82c686: QOM-ify superio related functionality David Gibson
2021-05-04  5:52 ` [PULL 21/46] vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIO David Gibson
2021-05-04  5:52 ` [PULL 22/46] vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on it David Gibson
2021-05-04  5:52 ` [PULL 23/46] vt82c686: Add emulation of VT8231 south bridge David Gibson
2021-05-04  5:52 ` [PULL 24/46] hw/pci-host: Add emulation of Marvell MV64361 PPC system controller David Gibson
2021-05-04  5:52 ` [PULL 25/46] hw/ppc: Add emulation of Genesi/bPlan Pegasos II David Gibson
2021-05-04  5:52 ` [PULL 26/46] spapr: Rename RTAS_MAX_ADDR to FDT_MAX_ADDR David Gibson
2021-05-04  5:52 ` [PULL 27/46] ppc/spapr: Add support for implement support for H_SCM_HEALTH David Gibson
2021-05-04  5:52 ` [PULL 28/46] roms/Makefile: Update ppce500 u-boot build directory name David Gibson
2021-05-04  5:52 ` [PULL 29/46] roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support David Gibson
2021-05-04  5:52 ` [PULL 30/46] docs/system: ppc: Add documentation for ppce500 machine David Gibson
2021-05-04  5:52 ` [PULL 31/46] target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour David Gibson
2021-05-04  5:52 ` [PULL 32/46] target/ppc: POWER10 supports scv David Gibson
2021-05-04  5:52 ` [PULL 33/46] ppc: Rename current DAWR macros and variables David Gibson
2021-05-04  5:53 ` [PULL 34/46] spapr.c: do not use MachineClass::max_cpus to limit CPUs David Gibson
2021-05-04  5:53 ` [PULL 35/46] spapr.h: increase FDT_MAX_SIZE David Gibson
2021-05-04  5:53 ` [PULL 36/46] spapr_drc.c: handle hotunplug errors in drc_unisolate_logical() David Gibson
2021-05-04  5:53 ` [PULL 37/46] target/ppc: code motion from translate_init.c.inc to gdbstub.c David Gibson
2021-05-04  5:53 ` [PULL 38/46] target/ppc: move opcode table logic to translate.c David Gibson
2021-05-04  5:53 ` [PULL 39/46] target/ppc: rework AIL logic in interrupt delivery David Gibson
2021-05-04  5:53 ` [PULL 40/46] target/ppc: Add POWER10 exception model David Gibson
2021-05-04  5:53 ` [PULL 41/46] target/ppc: Clean up _spr_register et al David Gibson
2021-05-04  5:53 ` [PULL 42/46] target/ppc: Reduce the size of ppc_spr_t David Gibson
2021-05-04  5:53 ` [PULL 43/46] target/ppc: removed VSCR from SPR registration David Gibson
2021-05-04  5:53 ` [PULL 44/46] hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset() David Gibson
2021-05-04  5:53 ` [PULL 45/46] hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset() David Gibson
2021-05-04  5:53 ` [PULL 46/46] hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset() David Gibson
2021-05-06 17:54 ` [PULL 00/46] ppc-for-6.1 queue 20210504 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210504055312.306823-15-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=groug@kaod.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).