qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, "Thomas Huth" <thuth@redhat.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	"Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: [PULL 27/33] tests/tcg: Increase timeout for TCI
Date: Sat, 19 Jun 2021 11:14:46 -0700	[thread overview]
Message-ID: <20210619181452.877683-28-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210619181452.877683-1-richard.henderson@linaro.org>

The longest test at the moment seems to be a (slower)
aarch64 host, for which test-mmap takes 64 seconds.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 configure                 | 3 +++
 tests/tcg/Makefile.target | 6 ++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/configure b/configure
index 262ab71802..55b85e256d 100755
--- a/configure
+++ b/configure
@@ -5803,6 +5803,9 @@ fi
 if test "$optreset" = "yes" ; then
   echo "HAVE_OPTRESET=y" >> $config_host_mak
 fi
+if test "$tcg" = "enabled" -a "$tcg_interpreter" = "true" ; then
+  echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
+fi
 if test "$fdatasync" = "yes" ; then
   echo "CONFIG_FDATASYNC=y" >> $config_host_mak
 fi
diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target
index b29fae4630..63cf1b2573 100644
--- a/tests/tcg/Makefile.target
+++ b/tests/tcg/Makefile.target
@@ -81,8 +81,10 @@ LDFLAGS=
 QEMU_OPTS=
 
 
-# If TCG debugging is enabled things are a lot slower
-ifeq ($(CONFIG_DEBUG_TCG),y)
+# If TCG debugging, or TCI is enabled things are a lot slower
+ifneq ($(CONFIG_TCG_INTERPRETER),)
+TIMEOUT=90
+else ifneq ($(CONFIG_DEBUG_TCG),)
 TIMEOUT=60
 else
 TIMEOUT=15
-- 
2.25.1



  parent reply	other threads:[~2021-06-19 18:37 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-19 18:14 [PULL 00/33] tcg patch queue Richard Henderson
2021-06-19 18:14 ` [PULL 01/33] tcg: Combine dh_is_64bit and dh_is_signed to dh_typecode Richard Henderson
2021-06-19 18:14 ` [PULL 02/33] tcg: Add tcg_call_flags Richard Henderson
2021-06-19 18:14 ` [PULL 03/33] accel/tcg/plugin-gen: Drop inline markers Richard Henderson
2021-06-19 18:14 ` [PULL 04/33] plugins: Drop tcg_flags from struct qemu_plugin_dyn_cb Richard Henderson
2021-06-19 18:14 ` [PULL 05/33] accel/tcg: Add tcg call flags to plugins helpers Richard Henderson
2021-06-19 18:14 ` [PULL 06/33] tcg: Store the TCGHelperInfo in the TCGOp for call Richard Henderson
2021-06-19 18:14 ` [PULL 07/33] tcg: Add tcg_call_func Richard Henderson
2021-06-19 18:14 ` [PULL 08/33] tcg: Build ffi data structures for helpers Richard Henderson
2021-06-19 18:14 ` [PULL 09/33] tcg/tci: Improve tcg_target_call_clobber_regs Richard Henderson
2021-06-19 18:14 ` [PULL 10/33] tcg/tci: Move call-return regs to end of tcg_target_reg_alloc_order Richard Henderson
2021-06-19 18:14 ` [PULL 11/33] tcg/tci: Use ffi for calls Richard Henderson
2021-06-19 18:14 ` [PULL 12/33] tcg/tci: Reserve r13 for a temporary Richard Henderson
2021-06-19 18:14 ` [PULL 13/33] tcg/tci: Emit setcond before brcond Richard Henderson
2021-06-19 18:14 ` [PULL 14/33] tcg/tci: Remove tci_write_reg Richard Henderson
2021-06-19 18:14 ` [PULL 15/33] tcg/tci: Change encoding to uint32_t units Richard Henderson
2021-06-19 18:14 ` [PULL 16/33] tcg/tci: Implement goto_ptr Richard Henderson
2021-06-19 18:14 ` [PULL 17/33] tcg/tci: Implement movcond Richard Henderson
2021-06-19 18:14 ` [PULL 18/33] tcg/tci: Implement andc, orc, eqv, nand, nor Richard Henderson
2021-06-19 18:14 ` [PULL 19/33] tcg/tci: Implement extract, sextract Richard Henderson
2021-06-19 18:14 ` [PULL 20/33] tcg/tci: Implement clz, ctz, ctpop Richard Henderson
2021-06-19 18:14 ` [PULL 21/33] tcg/tci: Implement mulu2, muls2 Richard Henderson
2021-06-19 18:14 ` [PULL 22/33] tcg/tci: Implement add2, sub2 Richard Henderson
2021-06-19 18:14 ` [PULL 23/33] tcg/tci: Split out tci_qemu_ld, tci_qemu_st Richard Henderson
2021-06-19 18:14 ` [PULL 24/33] Revert "tcg/tci: Use exec/cpu_ldst.h interfaces" Richard Henderson
2021-06-19 18:14 ` [PULL 25/33] tcg/tci: Remove the qemu_ld/st_type macros Richard Henderson
2021-06-19 18:14 ` [PULL 26/33] tcg/tci: Use {set,clear}_helper_retaddr Richard Henderson
2021-06-19 18:14 ` Richard Henderson [this message]
2021-06-19 18:14 ` [PULL 28/33] accel/tcg: Probe the proper permissions for atomic ops Richard Henderson
2021-06-19 18:14 ` [PULL 29/33] tcg/sparc: Fix temp_allocate_frame vs sparc stack bias Richard Henderson
2021-06-19 18:14 ` [PULL 30/33] tcg: Allocate sufficient storage in temp_allocate_frame Richard Henderson
2021-09-01 10:52   ` Richard W.M. Jones
2021-09-01 12:55     ` Daniel P. Berrangé
2021-06-19 18:14 ` [PULL 31/33] tcg: Restart when exhausting the stack frame Richard Henderson
2021-06-19 18:14 ` [PULL 32/33] tcg: expose TCGCond manipulation routines Richard Henderson
2021-06-19 18:14 ` [PULL 33/33] util/oslib-win32: Fix fatal assertion in qemu_try_memalign Richard Henderson
2021-06-19 21:50 ` [PULL 00/33] tcg patch queue Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210619181452.877683-28-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alex.bennee@linaro.org \
    --cc=f4bug@amsat.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).