* [PULL 1/6] docs/about: Remove the duplicated doc
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-25 11:00 ` [PULL 2/6] docs/about: Unify the subject format Thomas Huth
` (5 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
From: Yanan Wang <wangyanan55@huawei.com>
There are two places describing the same thing about deprecation
of invalid topologies of -smp CLI, so remove the duplicated one.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210823030005.165668-2-wangyanan55@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/about/removed-features.rst | 13 -------------
1 file changed, 13 deletions(-)
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index cbfa1a8e31..6a9c5bb484 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -647,19 +647,6 @@ as ignored. Currently, users are responsible for making sure the backing storage
specified with ``-mem-path`` can actually provide the guest RAM configured with
``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
-``-smp`` (invalid topologies) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''
-
-CPU topology properties should describe whole machine topology including
-possible CPUs.
-
-However, historically it was possible to start QEMU with an incorrect topology
-where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
-which could lead to an incorrect topology enumeration by the guest.
-Support for invalid topologies is removed, the user must ensure
-topologies described with -smp include all possible cpus, i.e.
-*sockets* * *cores* * *threads* = *maxcpus*.
-
``-machine enforce-config-section=on|off`` (removed 5.2)
''''''''''''''''''''''''''''''''''''''''''''''''''''''''
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PULL 2/6] docs/about: Unify the subject format
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
2021-08-25 11:00 ` [PULL 1/6] docs/about: Remove the duplicated doc Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-25 11:00 ` [PULL 3/6] docs/about: Add the missing release record in the subject Thomas Huth
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
From: Yanan Wang <wangyanan55@huawei.com>
There is a mixture of "since/removed in X.Y" vs "since/removed in X.Y.Z"
in the subjects in deprecated.rst/removed-features.rst. It will be better
to use an unified format. It seems unlikely that we will ever deprecate
something in a stable release, and even more unlikely that we'll remove
something in one, so the short versions look like the thing we want to
standardize on.
So here we unify the subject format in deprecated.rst to "since X.Y", and
unify the subject format in removed-features.rst to "removed in X.Y".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210823030005.165668-3-wangyanan55@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/about/deprecated.rst | 56 ++++++++++++++++-----------------
docs/about/removed-features.rst | 28 ++++++++---------
2 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst
index 6d438f1c8d..8d4fd384a5 100644
--- a/docs/about/deprecated.rst
+++ b/docs/about/deprecated.rst
@@ -107,8 +107,8 @@ the process listing. This is replaced by the new ``password-secret``
option which lets the password be securely provided on the command
line using a ``secret`` object instance.
-``opened`` property of ``rng-*`` objects (since 6.0.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``opened`` property of ``rng-*`` objects (since 6.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''
The only effect of specifying ``opened=on`` in the command line or QMP
``object-add`` is that the device is opened immediately, possibly before all
@@ -116,8 +116,8 @@ other options have been processed. This will either have no effect (if
``opened`` was the last option) or cause errors. The property is therefore
useless and should not be specified.
-``loaded`` property of ``secret`` and ``secret_keyring`` objects (since 6.0.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``loaded`` property of ``secret`` and ``secret_keyring`` objects (since 6.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The only effect of specifying ``loaded=on`` in the command line or QMP
``object-add`` is that the secret is loaded immediately, possibly before all
@@ -142,33 +142,33 @@ should be used instead.
QEMU Machine Protocol (QMP) commands
------------------------------------
-``blockdev-open-tray``, ``blockdev-close-tray`` argument ``device`` (since 2.8.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``blockdev-open-tray``, ``blockdev-close-tray`` argument ``device`` (since 2.8)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Use argument ``id`` instead.
-``eject`` argument ``device`` (since 2.8.0)
-'''''''''''''''''''''''''''''''''''''''''''
+``eject`` argument ``device`` (since 2.8)
+'''''''''''''''''''''''''''''''''''''''''
Use argument ``id`` instead.
-``blockdev-change-medium`` argument ``device`` (since 2.8.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``blockdev-change-medium`` argument ``device`` (since 2.8)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Use argument ``id`` instead.
-``block_set_io_throttle`` argument ``device`` (since 2.8.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``block_set_io_throttle`` argument ``device`` (since 2.8)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Use argument ``id`` instead.
-``blockdev-add`` empty string argument ``backing`` (since 2.10.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``blockdev-add`` empty string argument ``backing`` (since 2.10)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Use argument value ``null`` instead.
-``block-commit`` arguments ``base`` and ``top`` (since 3.1.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``block-commit`` arguments ``base`` and ``top`` (since 3.1)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Use arguments ``base-node`` and ``top-node`` instead.
@@ -191,8 +191,8 @@ from Linux upstream kernel, declare it deprecated.
System emulator CPUS
--------------------
-``Icelake-Client`` CPU Model (since 5.2.0)
-''''''''''''''''''''''''''''''''''''''''''
+``Icelake-Client`` CPU Model (since 5.2)
+''''''''''''''''''''''''''''''''''''''''
``Icelake-Client`` CPU Models are deprecated. Use ``Icelake-Server`` CPU
Models instead.
@@ -245,8 +245,8 @@ Device options
Emulated device options
'''''''''''''''''''''''
-``-device virtio-blk,scsi=on|off`` (since 5.0.0)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+``-device virtio-blk,scsi=on|off`` (since 5.0)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The virtio-blk SCSI passthrough feature is a legacy VIRTIO feature. VIRTIO 1.0
and later do not support it because the virtio-scsi device was introduced for
@@ -258,14 +258,14 @@ alias.
Block device options
''''''''''''''''''''
-``"backing": ""`` (since 2.12.0)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+``"backing": ""`` (since 2.12)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
In order to prevent QEMU from automatically opening an image's backing
chain, use ``"backing": null`` instead.
-``rbd`` keyvalue pair encoded filenames: ``""`` (since 3.1.0)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+``rbd`` keyvalue pair encoded filenames: ``""`` (since 3.1)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Options for ``rbd`` should be specified according to its runtime options,
like other block drivers. Legacy parsing of keyvalue pair encoded
@@ -283,8 +283,8 @@ The above, converted to the current supported format::
linux-user mode CPUs
--------------------
-``ppc64abi32`` CPUs (since 5.2.0)
-'''''''''''''''''''''''''''''''''
+``ppc64abi32`` CPUs (since 5.2)
+'''''''''''''''''''''''''''''''
The ``ppc64abi32`` architecture has a number of issues which regularly
trip up our CI testing and is suspected to be quite broken. For that
@@ -303,8 +303,8 @@ Related binaries
Backwards compatibility
-----------------------
-Runnability guarantee of CPU models (since 4.1.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''
+Runnability guarantee of CPU models (since 4.1)
+'''''''''''''''''''''''''''''''''''''''''''''''
Previous versions of QEMU never changed existing CPU models in
ways that introduced additional host software or hardware
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index 6a9c5bb484..1c926a8bc1 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -194,8 +194,8 @@ by the ``tls-authz`` and ``sasl-authz`` options.
The ``pretty=on|off`` switch has no effect for HMP monitors and
its use is rejected.
-``-drive file=json:{...{'driver':'file'}}`` (removed 6.0)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``-drive file=json:{...{'driver':'file'}}`` (removed in 6.0)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The 'file' driver for drives is no longer appropriate for character or host
devices and will only accept regular files (S_IFREG). The correct driver
@@ -272,8 +272,8 @@ for the RISC-V ``virt`` machine and ``sifive_u`` machine.
QEMU Machine Protocol (QMP) commands
------------------------------------
-``block-dirty-bitmap-add`` "autoload" parameter (removed in 4.2.0)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``block-dirty-bitmap-add`` "autoload" parameter (removed in 4.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The "autoload" parameter has been ignored since 2.12.0. All bitmaps
are automatically loaded from qcow2 images.
@@ -456,15 +456,15 @@ Nobody was using this CPU emulation in QEMU, and there were no test images
available to make sure that the code is still working, so it has been removed
without replacement.
-``lm32`` CPUs (removed in 6.1.0)
-''''''''''''''''''''''''''''''''
+``lm32`` CPUs (removed in 6.1)
+''''''''''''''''''''''''''''''
The only public user of this architecture was the milkymist project,
which has been dead for years; there was never an upstream Linux
port. Removed without replacement.
-``unicore32`` CPUs (since 6.1.0)
-''''''''''''''''''''''''''''''''
+``unicore32`` CPUs (removed in 6.1)
+'''''''''''''''''''''''''''''''''''
Support for this CPU was removed from the upstream Linux kernel, and
there is no available upstream toolchain to build binaries for it.
@@ -593,8 +593,8 @@ error when ``-u`` is not used.
Command line options
--------------------
-``-smp`` (invalid topologies) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''
+``-smp`` (invalid topologies) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''
CPU topology properties should describe whole machine topology including
possible CPUs.
@@ -606,8 +606,8 @@ Support for invalid topologies is removed, the user must ensure
topologies described with -smp include all possible cpus, i.e.
*sockets* * *cores* * *threads* = *maxcpus*.
-``-numa`` node (without memory specified) (removed 5.2)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``-numa`` node (without memory specified) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Splitting RAM by default between NUMA nodes had the same issues as ``mem``
parameter with the difference that the role of the user plays QEMU using
@@ -647,8 +647,8 @@ as ignored. Currently, users are responsible for making sure the backing storage
specified with ``-mem-path`` can actually provide the guest RAM configured with
``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
-``-machine enforce-config-section=on|off`` (removed 5.2)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``-machine enforce-config-section=on|off`` (removed in 5.2)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The ``enforce-config-section`` property was replaced by the
``-global migration.send-configuration={on|off}`` option.
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PULL 3/6] docs/about: Add the missing release record in the subject
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
2021-08-25 11:00 ` [PULL 1/6] docs/about: Remove the duplicated doc Thomas Huth
2021-08-25 11:00 ` [PULL 2/6] docs/about: Unify the subject format Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-25 11:00 ` [PULL 4/6] docs/about/removed-features: Move some CLI options to the right location Thomas Huth
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
From: Yanan Wang <wangyanan55@huawei.com>
Commit 29e0447551
(docs/about/removed-features: Document removed CLI options from QEMU v3.1)
has recorded some CLI options as replaced/removed from QEMU v3.1, but one
of the subjects has missed the release record. Let's fix it.
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210823030005.165668-4-wangyanan55@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/about/removed-features.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index 1c926a8bc1..8feeead449 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -140,8 +140,8 @@ Use ``-rtc driftfix=slew`` instead.
Replaced by ``-rtc base=date``.
-``-vnc ...,tls=...``, ``-vnc ...,x509=...`` & ``-vnc ...,x509verify=...``
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+``-vnc ...,tls=...``, ``-vnc ...,x509=...`` & ``-vnc ...,x509verify=...`` (removed in 3.1)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
The "tls-creds" option should be used instead to point to a "tls-creds-x509"
object created using "-object".
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PULL 4/6] docs/about/removed-features: Move some CLI options to the right location
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
` (2 preceding siblings ...)
2021-08-25 11:00 ` [PULL 3/6] docs/about: Add the missing release record in the subject Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-25 11:00 ` [PULL 5/6] docs: split the CI docs into two files Thomas Huth
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
Some of the removed CLI options have been added to the wrong section
in the "Removed features" chapter - they've been put into the
"Related binaries" section instead. Move them now into the correct
"System emulator command line arguments" section.
Message-Id: <20210818112908.102205-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/about/removed-features.rst | 124 ++++++++++++++++----------------
1 file changed, 61 insertions(+), 63 deletions(-)
diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst
index 8feeead449..08f9e625ce 100644
--- a/docs/about/removed-features.rst
+++ b/docs/about/removed-features.rst
@@ -146,12 +146,73 @@ Replaced by ``-rtc base=date``.
The "tls-creds" option should be used instead to point to a "tls-creds-x509"
object created using "-object".
+``-mem-path`` fallback to RAM (removed in 5.0)
+''''''''''''''''''''''''''''''''''''''''''''''
+
+If guest RAM allocation from file pointed by ``mem-path`` failed,
+QEMU was falling back to allocating from RAM, which might have resulted
+in unpredictable behavior since the backing file specified by the user
+as ignored. Currently, users are responsible for making sure the backing storage
+specified with ``-mem-path`` can actually provide the guest RAM configured with
+``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
+
``-net ...,name=...`` (removed in 5.1)
''''''''''''''''''''''''''''''''''''''
The ``name`` parameter of the ``-net`` option was a synonym
for the ``id`` parameter, which should now be used instead.
+``-numa node,mem=...`` (removed in 5.1)
+'''''''''''''''''''''''''''''''''''''''
+
+The parameter ``mem`` of ``-numa node`` was used to assign a part of guest RAM
+to a NUMA node. But when using it, it's impossible to manage a specified RAM
+chunk on the host side (like bind it to a host node, setting bind policy, ...),
+so the guest ends up with the fake NUMA configuration with suboptiomal
+performance.
+However since 2014 there is an alternative way to assign RAM to a NUMA node
+using parameter ``memdev``, which does the same as ``mem`` and adds
+means to actually manage node RAM on the host side. Use parameter ``memdev``
+with *memory-backend-ram* backend as replacement for parameter ``mem``
+to achieve the same fake NUMA effect or a properly configured
+*memory-backend-file* backend to actually benefit from NUMA configuration.
+New machine versions (since 5.1) will not accept the option but it will still
+work with old machine types. User can check the QAPI schema to see if the legacy
+option is supported by looking at MachineInfo::numa-mem-supported property.
+
+``-numa`` node (without memory specified) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Splitting RAM by default between NUMA nodes had the same issues as ``mem``
+parameter with the difference that the role of the user plays QEMU using
+implicit generic or board specific splitting rule.
+Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if
+it's supported by used machine type) to define mapping explicitly instead.
+Users of existing VMs, wishing to preserve the same RAM distribution, should
+configure it explicitly using ``-numa node,memdev`` options. Current RAM
+distribution can be retrieved using HMP command ``info numa`` and if separate
+memory devices (pc|nv-dimm) are present use ``info memory-device`` and subtract
+device memory from output of ``info numa``.
+
+``-smp`` (invalid topologies) (removed in 5.2)
+''''''''''''''''''''''''''''''''''''''''''''''
+
+CPU topology properties should describe whole machine topology including
+possible CPUs.
+
+However, historically it was possible to start QEMU with an incorrect topology
+where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
+which could lead to an incorrect topology enumeration by the guest.
+Support for invalid topologies is removed, the user must ensure
+topologies described with -smp include all possible cpus, i.e.
+*sockets* * *cores* * *threads* = *maxcpus*.
+
+``-machine enforce-config-section=on|off`` (removed in 5.2)
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+The ``enforce-config-section`` property was replaced by the
+``-global migration.send-configuration={on|off}`` option.
+
``-no-kvm`` (removed in 5.2)
''''''''''''''''''''''''''''
@@ -590,69 +651,6 @@ enforce that any failure to open the backing image (including if the
backing file is missing or an incorrect format was specified) is an
error when ``-u`` is not used.
-Command line options
---------------------
-
-``-smp`` (invalid topologies) (removed in 5.2)
-''''''''''''''''''''''''''''''''''''''''''''''
-
-CPU topology properties should describe whole machine topology including
-possible CPUs.
-
-However, historically it was possible to start QEMU with an incorrect topology
-where *n* <= *sockets* * *cores* * *threads* < *maxcpus*,
-which could lead to an incorrect topology enumeration by the guest.
-Support for invalid topologies is removed, the user must ensure
-topologies described with -smp include all possible cpus, i.e.
-*sockets* * *cores* * *threads* = *maxcpus*.
-
-``-numa`` node (without memory specified) (removed in 5.2)
-''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-
-Splitting RAM by default between NUMA nodes had the same issues as ``mem``
-parameter with the difference that the role of the user plays QEMU using
-implicit generic or board specific splitting rule.
-Use ``memdev`` with *memory-backend-ram* backend or ``mem`` (if
-it's supported by used machine type) to define mapping explicitly instead.
-Users of existing VMs, wishing to preserve the same RAM distribution, should
-configure it explicitly using ``-numa node,memdev`` options. Current RAM
-distribution can be retrieved using HMP command ``info numa`` and if separate
-memory devices (pc|nv-dimm) are present use ``info memory-device`` and subtract
-device memory from output of ``info numa``.
-
-``-numa node,mem=``\ *size* (removed in 5.1)
-''''''''''''''''''''''''''''''''''''''''''''
-
-The parameter ``mem`` of ``-numa node`` was used to assign a part of
-guest RAM to a NUMA node. But when using it, it's impossible to manage a specified
-RAM chunk on the host side (like bind it to a host node, setting bind policy, ...),
-so the guest ends up with the fake NUMA configuration with suboptiomal performance.
-However since 2014 there is an alternative way to assign RAM to a NUMA node
-using parameter ``memdev``, which does the same as ``mem`` and adds
-means to actually manage node RAM on the host side. Use parameter ``memdev``
-with *memory-backend-ram* backend as replacement for parameter ``mem``
-to achieve the same fake NUMA effect or a properly configured
-*memory-backend-file* backend to actually benefit from NUMA configuration.
-New machine versions (since 5.1) will not accept the option but it will still
-work with old machine types. User can check the QAPI schema to see if the legacy
-option is supported by looking at MachineInfo::numa-mem-supported property.
-
-``-mem-path`` fallback to RAM (removed in 5.0)
-''''''''''''''''''''''''''''''''''''''''''''''
-
-If guest RAM allocation from file pointed by ``mem-path`` failed,
-QEMU was falling back to allocating from RAM, which might have resulted
-in unpredictable behavior since the backing file specified by the user
-as ignored. Currently, users are responsible for making sure the backing storage
-specified with ``-mem-path`` can actually provide the guest RAM configured with
-``-m`` and QEMU fails to start up if RAM allocation is unsuccessful.
-
-``-machine enforce-config-section=on|off`` (removed in 5.2)
-'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
-
-The ``enforce-config-section`` property was replaced by the
-``-global migration.send-configuration={on|off}`` option.
-
qemu-img amend to adjust backing file (removed in 6.1)
''''''''''''''''''''''''''''''''''''''''''''''''''''''
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PULL 5/6] docs: split the CI docs into two files
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
` (3 preceding siblings ...)
2021-08-25 11:00 ` [PULL 4/6] docs/about/removed-features: Move some CLI options to the right location Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-30 13:33 ` Philippe Mathieu-Daudé
2021-08-25 11:00 ` [PULL 6/6] docs: make sphinx-build be quiet by default Thomas Huth
2021-08-25 20:09 ` [PULL 0/6] documentation updates Peter Maydell
6 siblings, 1 reply; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
From: Daniel P. Berrangé <berrange@redhat.com>
This splits the CI docs into one file talking about job setup and usage
and another file describing provisioning of custom runners.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/devel/ci-jobs.rst | 40 ++++++++++
docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++
docs/devel/ci.rst | 159 +-------------------------------------
3 files changed, 159 insertions(+), 157 deletions(-)
create mode 100644 docs/devel/ci-jobs.rst
create mode 100644 docs/devel/ci-runners.rst
diff --git a/docs/devel/ci-jobs.rst b/docs/devel/ci-jobs.rst
new file mode 100644
index 0000000000..9cd9819786
--- /dev/null
+++ b/docs/devel/ci-jobs.rst
@@ -0,0 +1,40 @@
+Custom CI/CD variables
+======================
+
+QEMU CI pipelines can be tuned by setting some CI environment variables.
+
+Set variable globally in the user's CI namespace
+------------------------------------------------
+
+Variables can be set globally in the user's CI namespace setting.
+
+For further information about how to set these variables, please refer to::
+
+ https://docs.gitlab.com/ee/ci/variables/#add-a-cicd-variable-to-a-project
+
+Set variable manually when pushing a branch or tag to the user's repository
+---------------------------------------------------------------------------
+
+Variables can be set manually when pushing a branch or tag, using
+git-push command line arguments.
+
+Example setting the QEMU_CI_EXAMPLE_VAR variable:
+
+.. code::
+
+ git push -o ci.variable="QEMU_CI_EXAMPLE_VAR=value" myrepo mybranch
+
+For further information about how to set these variables, please refer to::
+
+ https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-gitlab-cicd
+
+Here is a list of the most used variables:
+
+QEMU_CI_AVOCADO_TESTING
+~~~~~~~~~~~~~~~~~~~~~~~
+By default, tests using the Avocado framework are not run automatically in
+the pipelines (because multiple artifacts have to be downloaded, and if
+these artifacts are not already cached, downloading them make the jobs
+reach the timeout limit). Set this variable to have the tests using the
+Avocado framework run automatically.
+
diff --git a/docs/devel/ci-runners.rst b/docs/devel/ci-runners.rst
new file mode 100644
index 0000000000..7817001fb2
--- /dev/null
+++ b/docs/devel/ci-runners.rst
@@ -0,0 +1,117 @@
+Jobs on Custom Runners
+======================
+
+Besides the jobs run under the various CI systems listed before, there
+are a number additional jobs that will run before an actual merge.
+These use the same GitLab CI's service/framework already used for all
+other GitLab based CI jobs, but rely on additional systems, not the
+ones provided by GitLab as "shared runners".
+
+The architecture of GitLab's CI service allows different machines to
+be set up with GitLab's "agent", called gitlab-runner, which will take
+care of running jobs created by events such as a push to a branch.
+Here, the combination of a machine, properly configured with GitLab's
+gitlab-runner, is called a "custom runner".
+
+The GitLab CI jobs definition for the custom runners are located under::
+
+ .gitlab-ci.d/custom-runners.yml
+
+Custom runners entail custom machines. To see a list of the machines
+currently deployed in the QEMU GitLab CI and their maintainers, please
+refer to the QEMU `wiki <https://wiki.qemu.org/AdminContacts>`__.
+
+Machine Setup Howto
+-------------------
+
+For all Linux based systems, the setup can be mostly automated by the
+execution of two Ansible playbooks. Create an ``inventory`` file
+under ``scripts/ci/setup``, such as this::
+
+ fully.qualified.domain
+ other.machine.hostname
+
+You may need to set some variables in the inventory file itself. One
+very common need is to tell Ansible to use a Python 3 interpreter on
+those hosts. This would look like::
+
+ fully.qualified.domain ansible_python_interpreter=/usr/bin/python3
+ other.machine.hostname ansible_python_interpreter=/usr/bin/python3
+
+Build environment
+~~~~~~~~~~~~~~~~~
+
+The ``scripts/ci/setup/build-environment.yml`` Ansible playbook will
+set up machines with the environment needed to perform builds and run
+QEMU tests. This playbook consists on the installation of various
+required packages (and a general package update while at it). It
+currently covers a number of different Linux distributions, but it can
+be expanded to cover other systems.
+
+The minimum required version of Ansible successfully tested in this
+playbook is 2.8.0 (a version check is embedded within the playbook
+itself). To run the playbook, execute::
+
+ cd scripts/ci/setup
+ ansible-playbook -i inventory build-environment.yml
+
+Please note that most of the tasks in the playbook require superuser
+privileges, such as those from the ``root`` account or those obtained
+by ``sudo``. If necessary, please refer to ``ansible-playbook``
+options such as ``--become``, ``--become-method``, ``--become-user``
+and ``--ask-become-pass``.
+
+gitlab-runner setup and registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The gitlab-runner agent needs to be installed on each machine that
+will run jobs. The association between a machine and a GitLab project
+happens with a registration token. To find the registration token for
+your repository/project, navigate on GitLab's web UI to:
+
+ * Settings (the gears-like icon at the bottom of the left hand side
+ vertical toolbar), then
+ * CI/CD, then
+ * Runners, and click on the "Expand" button, then
+ * Under "Set up a specific Runner manually", look for the value under
+ "And this registration token:"
+
+Copy the ``scripts/ci/setup/vars.yml.template`` file to
+``scripts/ci/setup/vars.yml``. Then, set the
+``gitlab_runner_registration_token`` variable to the value obtained
+earlier.
+
+To run the playbook, execute::
+
+ cd scripts/ci/setup
+ ansible-playbook -i inventory gitlab-runner.yml
+
+Following the registration, it's necessary to configure the runner tags,
+and optionally other configurations on the GitLab UI. Navigate to:
+
+ * Settings (the gears like icon), then
+ * CI/CD, then
+ * Runners, and click on the "Expand" button, then
+ * "Runners activated for this project", then
+ * Click on the "Edit" icon (next to the "Lock" Icon)
+
+Tags are very important as they are used to route specific jobs to
+specific types of runners, so it's a good idea to double check that
+the automatically created tags are consistent with the OS and
+architecture. For instance, an Ubuntu 20.04 aarch64 system should
+have tags set as::
+
+ ubuntu_20.04,aarch64
+
+Because the job definition at ``.gitlab-ci.d/custom-runners.yml``
+would contain::
+
+ ubuntu-20.04-aarch64-all:
+ tags:
+ - ubuntu_20.04
+ - aarch64
+
+It's also recommended to:
+
+ * increase the "Maximum job timeout" to something like ``2h``
+ * give it a better Description
diff --git a/docs/devel/ci.rst b/docs/devel/ci.rst
index 205572510c..a6a650968b 100644
--- a/docs/devel/ci.rst
+++ b/docs/devel/ci.rst
@@ -8,160 +8,5 @@ found at::
https://wiki.qemu.org/Testing/CI
-Custom CI/CD variables
-======================
-
-QEMU CI pipelines can be tuned by setting some CI environment variables.
-
-Set variable globally in the user's CI namespace
-------------------------------------------------
-
-Variables can be set globally in the user's CI namespace setting.
-
-For further information about how to set these variables, please refer to::
-
- https://docs.gitlab.com/ee/ci/variables/#add-a-cicd-variable-to-a-project
-
-Set variable manually when pushing a branch or tag to the user's repository
----------------------------------------------------------------------------
-
-Variables can be set manually when pushing a branch or tag, using
-git-push command line arguments.
-
-Example setting the QEMU_CI_EXAMPLE_VAR variable:
-
-.. code::
-
- git push -o ci.variable="QEMU_CI_EXAMPLE_VAR=value" myrepo mybranch
-
-For further information about how to set these variables, please refer to::
-
- https://docs.gitlab.com/ee/user/project/push_options.html#push-options-for-gitlab-cicd
-
-Here is a list of the most used variables:
-
-QEMU_CI_AVOCADO_TESTING
-~~~~~~~~~~~~~~~~~~~~~~~
-By default, tests using the Avocado framework are not run automatically in
-the pipelines (because multiple artifacts have to be downloaded, and if
-these artifacts are not already cached, downloading them make the jobs
-reach the timeout limit). Set this variable to have the tests using the
-Avocado framework run automatically.
-
-Jobs on Custom Runners
-======================
-
-Besides the jobs run under the various CI systems listed before, there
-are a number additional jobs that will run before an actual merge.
-These use the same GitLab CI's service/framework already used for all
-other GitLab based CI jobs, but rely on additional systems, not the
-ones provided by GitLab as "shared runners".
-
-The architecture of GitLab's CI service allows different machines to
-be set up with GitLab's "agent", called gitlab-runner, which will take
-care of running jobs created by events such as a push to a branch.
-Here, the combination of a machine, properly configured with GitLab's
-gitlab-runner, is called a "custom runner".
-
-The GitLab CI jobs definition for the custom runners are located under::
-
- .gitlab-ci.d/custom-runners.yml
-
-Custom runners entail custom machines. To see a list of the machines
-currently deployed in the QEMU GitLab CI and their maintainers, please
-refer to the QEMU `wiki <https://wiki.qemu.org/AdminContacts>`__.
-
-Machine Setup Howto
--------------------
-
-For all Linux based systems, the setup can be mostly automated by the
-execution of two Ansible playbooks. Create an ``inventory`` file
-under ``scripts/ci/setup``, such as this::
-
- fully.qualified.domain
- other.machine.hostname
-
-You may need to set some variables in the inventory file itself. One
-very common need is to tell Ansible to use a Python 3 interpreter on
-those hosts. This would look like::
-
- fully.qualified.domain ansible_python_interpreter=/usr/bin/python3
- other.machine.hostname ansible_python_interpreter=/usr/bin/python3
-
-Build environment
-~~~~~~~~~~~~~~~~~
-
-The ``scripts/ci/setup/build-environment.yml`` Ansible playbook will
-set up machines with the environment needed to perform builds and run
-QEMU tests. This playbook consists on the installation of various
-required packages (and a general package update while at it). It
-currently covers a number of different Linux distributions, but it can
-be expanded to cover other systems.
-
-The minimum required version of Ansible successfully tested in this
-playbook is 2.8.0 (a version check is embedded within the playbook
-itself). To run the playbook, execute::
-
- cd scripts/ci/setup
- ansible-playbook -i inventory build-environment.yml
-
-Please note that most of the tasks in the playbook require superuser
-privileges, such as those from the ``root`` account or those obtained
-by ``sudo``. If necessary, please refer to ``ansible-playbook``
-options such as ``--become``, ``--become-method``, ``--become-user``
-and ``--ask-become-pass``.
-
-gitlab-runner setup and registration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The gitlab-runner agent needs to be installed on each machine that
-will run jobs. The association between a machine and a GitLab project
-happens with a registration token. To find the registration token for
-your repository/project, navigate on GitLab's web UI to:
-
- * Settings (the gears-like icon at the bottom of the left hand side
- vertical toolbar), then
- * CI/CD, then
- * Runners, and click on the "Expand" button, then
- * Under "Set up a specific Runner manually", look for the value under
- "And this registration token:"
-
-Copy the ``scripts/ci/setup/vars.yml.template`` file to
-``scripts/ci/setup/vars.yml``. Then, set the
-``gitlab_runner_registration_token`` variable to the value obtained
-earlier.
-
-To run the playbook, execute::
-
- cd scripts/ci/setup
- ansible-playbook -i inventory gitlab-runner.yml
-
-Following the registration, it's necessary to configure the runner tags,
-and optionally other configurations on the GitLab UI. Navigate to:
-
- * Settings (the gears like icon), then
- * CI/CD, then
- * Runners, and click on the "Expand" button, then
- * "Runners activated for this project", then
- * Click on the "Edit" icon (next to the "Lock" Icon)
-
-Tags are very important as they are used to route specific jobs to
-specific types of runners, so it's a good idea to double check that
-the automatically created tags are consistent with the OS and
-architecture. For instance, an Ubuntu 20.04 aarch64 system should
-have tags set as::
-
- ubuntu_20.04,aarch64
-
-Because the job definition at ``.gitlab-ci.d/custom-runners.yml``
-would contain::
-
- ubuntu-20.04-aarch64-all:
- tags:
- - ubuntu_20.04
- - aarch64
-
-It's also recommended to:
-
- * increase the "Maximum job timeout" to something like ``2h``
- * give it a better Description
+.. include:: ci-jobs.rst
+.. include:: ci-runners.rst
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PULL 5/6] docs: split the CI docs into two files
2021-08-25 11:00 ` [PULL 5/6] docs: split the CI docs into two files Thomas Huth
@ 2021-08-30 13:33 ` Philippe Mathieu-Daudé
2021-08-30 16:02 ` Thomas Huth
0 siblings, 1 reply; 12+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-08-30 13:33 UTC (permalink / raw)
To: Thomas Huth, qemu-devel, Peter Maydell
Hi Thomas,
On 8/25/21 1:00 PM, Thomas Huth wrote:
> From: Daniel P. Berrangé <berrange@redhat.com>
>
> This splits the CI docs into one file talking about job setup and usage
> and another file describing provisioning of custom runners.
>
> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Reviewed-by: Willian Rampazzo <willianr@redhat.com>
> Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> ---
> docs/devel/ci-jobs.rst | 40 ++++++++++
> docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++
> docs/devel/ci.rst | 159 +-------------------------------------
> 3 files changed, 159 insertions(+), 157 deletions(-)
> create mode 100644 docs/devel/ci-jobs.rst
> create mode 100644 docs/devel/ci-runners.rst
You took this one but not the following "docs: add definitions of
terms for CI/testing", is there something missing there?
https://www.mail-archive.com/qemu-devel@nongnu.org/msg830839.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PULL 5/6] docs: split the CI docs into two files
2021-08-30 13:33 ` Philippe Mathieu-Daudé
@ 2021-08-30 16:02 ` Thomas Huth
2021-08-30 21:15 ` Philippe Mathieu-Daudé
0 siblings, 1 reply; 12+ messages in thread
From: Thomas Huth @ 2021-08-30 16:02 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel, Peter Maydell
On 30/08/2021 15.33, Philippe Mathieu-Daudé wrote:
> Hi Thomas,
>
> On 8/25/21 1:00 PM, Thomas Huth wrote:
>> From: Daniel P. Berrangé <berrange@redhat.com>
>>
>> This splits the CI docs into one file talking about job setup and usage
>> and another file describing provisioning of custom runners.
>>
>> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>> Reviewed-by: Willian Rampazzo <willianr@redhat.com>
>> Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>> ---
>> docs/devel/ci-jobs.rst | 40 ++++++++++
>> docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++
>> docs/devel/ci.rst | 159 +-------------------------------------
>> 3 files changed, 159 insertions(+), 157 deletions(-)
>> create mode 100644 docs/devel/ci-jobs.rst
>> create mode 100644 docs/devel/ci-runners.rst
>
> You took this one but not the following "docs: add definitions of
> terms for CI/testing", is there something missing there?
> https://www.mail-archive.com/qemu-devel@nongnu.org/msg830839.html
I took the patch from Daniel's series here:
https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg02102.html
The second patch there did not apply anymore.
Sorry for missing Willian's patch, I can put it in my next PR if nobody
beats me to it.
Thomas
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PULL 5/6] docs: split the CI docs into two files
2021-08-30 16:02 ` Thomas Huth
@ 2021-08-30 21:15 ` Philippe Mathieu-Daudé
2021-08-31 5:07 ` Thomas Huth
0 siblings, 1 reply; 12+ messages in thread
From: Philippe Mathieu-Daudé @ 2021-08-30 21:15 UTC (permalink / raw)
To: Thomas Huth, qemu-devel, Peter Maydell
On 8/30/21 6:02 PM, Thomas Huth wrote:
> On 30/08/2021 15.33, Philippe Mathieu-Daudé wrote:
>> Hi Thomas,
>>
>> On 8/25/21 1:00 PM, Thomas Huth wrote:
>>> From: Daniel P. Berrangé <berrange@redhat.com>
>>>
>>> This splits the CI docs into one file talking about job setup and usage
>>> and another file describing provisioning of custom runners.
>>>
>>> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
>>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>> Reviewed-by: Willian Rampazzo <willianr@redhat.com>
>>> Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>> ---
>>> docs/devel/ci-jobs.rst | 40 ++++++++++
>>> docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++
>>> docs/devel/ci.rst | 159 +-------------------------------------
>>> 3 files changed, 159 insertions(+), 157 deletions(-)
>>> create mode 100644 docs/devel/ci-jobs.rst
>>> create mode 100644 docs/devel/ci-runners.rst
>>
>> You took this one but not the following "docs: add definitions of
>> terms for CI/testing", is there something missing there?
>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg830839.html
>
> I took the patch from Daniel's series here:
>
> https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg02102.html
>
> The second patch there did not apply anymore.
Willian can you respin it please?
> Sorry for missing Willian's patch, I can put it in my next PR if nobody
> beats me to it.
No worry, thanks!
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PULL 5/6] docs: split the CI docs into two files
2021-08-30 21:15 ` Philippe Mathieu-Daudé
@ 2021-08-31 5:07 ` Thomas Huth
0 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-31 5:07 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu-devel, Peter Maydell
On 30/08/2021 23.15, Philippe Mathieu-Daudé wrote:
> On 8/30/21 6:02 PM, Thomas Huth wrote:
>> On 30/08/2021 15.33, Philippe Mathieu-Daudé wrote:
>>> Hi Thomas,
>>>
>>> On 8/25/21 1:00 PM, Thomas Huth wrote:
>>>> From: Daniel P. Berrangé <berrange@redhat.com>
>>>>
>>>> This splits the CI docs into one file talking about job setup and usage
>>>> and another file describing provisioning of custom runners.
>>>>
>>>> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
>>>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>>>> Reviewed-by: Willian Rampazzo <willianr@redhat.com>
>>>> Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
>>>> Signed-off-by: Thomas Huth <thuth@redhat.com>
>>>> ---
>>>> docs/devel/ci-jobs.rst | 40 ++++++++++
>>>> docs/devel/ci-runners.rst | 117 ++++++++++++++++++++++++++++
>>>> docs/devel/ci.rst | 159 +-------------------------------------
>>>> 3 files changed, 159 insertions(+), 157 deletions(-)
>>>> create mode 100644 docs/devel/ci-jobs.rst
>>>> create mode 100644 docs/devel/ci-runners.rst
>>>
>>> You took this one but not the following "docs: add definitions of
>>> terms for CI/testing", is there something missing there?
>>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg830839.html
>>
>> I took the patch from Daniel's series here:
>>
>> https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg02102.html
>>
>> The second patch there did not apply anymore.
>
> Willian can you respin it please?
No, you got it wrong. Daniel's second patch did not apply anymore. I didn't
look at Willian's series at that point in time.
Thomas
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PULL 6/6] docs: make sphinx-build be quiet by default
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
` (4 preceding siblings ...)
2021-08-25 11:00 ` [PULL 5/6] docs: split the CI docs into two files Thomas Huth
@ 2021-08-25 11:00 ` Thomas Huth
2021-08-25 20:09 ` [PULL 0/6] documentation updates Peter Maydell
6 siblings, 0 replies; 12+ messages in thread
From: Thomas Huth @ 2021-08-25 11:00 UTC (permalink / raw)
To: qemu-devel, Peter Maydell
From: Daniel P. Berrangé <berrange@redhat.com>
The sphinx-build is fairly verbose spitting out pages of output to the
console, which causes errors from other build commands to be scrolled
off the top of the terminal. This can leave the mistaken impression that
the build passed, when in fact there was a failure.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210812102427.4036399-1-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
docs/meson.build | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/docs/meson.build b/docs/meson.build
index 300b134329..cffe1ecf1d 100644
--- a/docs/meson.build
+++ b/docs/meson.build
@@ -9,7 +9,7 @@ endif
# Check if tools are available to build documentation.
build_docs = false
if sphinx_build.found()
- SPHINX_ARGS = ['env', 'CONFDIR=' + qemu_confdir, sphinx_build]
+ SPHINX_ARGS = ['env', 'CONFDIR=' + qemu_confdir, sphinx_build, '-q']
# If we're making warnings fatal, apply this to Sphinx runs as well
if get_option('werror')
SPHINX_ARGS += [ '-W' ]
--
2.27.0
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PULL 0/6] documentation updates
2021-08-25 11:00 [PULL 0/6] documentation updates Thomas Huth
` (5 preceding siblings ...)
2021-08-25 11:00 ` [PULL 6/6] docs: make sphinx-build be quiet by default Thomas Huth
@ 2021-08-25 20:09 ` Peter Maydell
6 siblings, 0 replies; 12+ messages in thread
From: Peter Maydell @ 2021-08-25 20:09 UTC (permalink / raw)
To: Thomas Huth; +Cc: QEMU Developers
On Wed, 25 Aug 2021 at 12:00, Thomas Huth <thuth@redhat.com> wrote:
>
> Hi Peter!
>
> The following changes since commit f9baca549e44791be0dd98de15add3d8452a8af0:
>
> Update version for v6.1.0 release (2021-08-24 17:59:52 +0100)
>
> are available in the Git repository at:
>
> https://gitlab.com/thuth/qemu.git tags/pull-request-2021-08-25
>
> for you to fetch changes up to 2e8801988282bf3a45b495efa8438509ff68056d:
>
> docs: make sphinx-build be quiet by default (2021-08-25 12:19:18 +0200)
>
> ----------------------------------------------------------------
> * Various updates for the documentation
>
Applied, thanks.
Please update the changelog at https://wiki.qemu.org/ChangeLog/6.2
for any user-visible changes.
-- PMM
^ permalink raw reply [flat|nested] 12+ messages in thread