qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Philipp Tomsich <philipp.tomsich@vrull.eu>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>,
	Kito Cheng <kito.cheng@sifive.com>,
	Alistair Francis <alistair.francis@wdc.com>,
	Philipp Tomsich <philipp.tomsich@vrull.eu>
Subject: [PATCH v11 13/16] target/riscv: Add rev8 instruction, removing grev/grevi
Date: Sat, 11 Sep 2021 16:00:13 +0200	[thread overview]
Message-ID: <20210911140016.834071-14-philipp.tomsich@vrull.eu> (raw)
In-Reply-To: <20210911140016.834071-1-philipp.tomsich@vrull.eu>

The 1.0.0 version of Zbb does not contain grev/grevi.  Instead, a
rev8 instruction (equivalent to the rev8 pseudo-instruction built on
grevi from pre-0.93 draft-B) is available.

This commit adds the new rev8 instruction and removes grev/grevi.

Note that there is no W-form of this instruction (both a
sign-extending and zero-extending 32-bit version can easily be
synthesized by following rev8 with either a srai or srli instruction
on RV64) and that the opcode encodings for rev8 in RV32 and RV64 are
different.

Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---

(no changes since v9)

Changes in v9:
- Rebased to 8880cc4362.
- Fixes a whitespace-at-the-end-of-line warning for the rev8 comment
  in insn32.decode

Changes in v4:
- reorder trans_rev8* functions to be sequential
- rename rev8 to rev8_32 in decoder

Changes in v3:
- rev8-addition & grevi*-removal moved to a separate commit

 target/riscv/bitmanip_helper.c          | 40 -------------------------
 target/riscv/helper.h                   |  2 --
 target/riscv/insn32.decode              | 12 ++++----
 target/riscv/insn_trans/trans_rvb.c.inc | 40 +++++--------------------
 4 files changed, 15 insertions(+), 79 deletions(-)

diff --git a/target/riscv/bitmanip_helper.c b/target/riscv/bitmanip_helper.c
index bb48388fcd..f1b5e5549f 100644
--- a/target/riscv/bitmanip_helper.c
+++ b/target/riscv/bitmanip_helper.c
@@ -24,46 +24,6 @@
 #include "exec/helper-proto.h"
 #include "tcg/tcg.h"
 
-static const uint64_t adjacent_masks[] = {
-    dup_const(MO_8, 0x55),
-    dup_const(MO_8, 0x33),
-    dup_const(MO_8, 0x0f),
-    dup_const(MO_16, 0xff),
-    dup_const(MO_32, 0xffff),
-    UINT32_MAX
-};
-
-static inline target_ulong do_swap(target_ulong x, uint64_t mask, int shift)
-{
-    return ((x & mask) << shift) | ((x & ~mask) >> shift);
-}
-
-static target_ulong do_grev(target_ulong rs1,
-                            target_ulong rs2,
-                            int bits)
-{
-    target_ulong x = rs1;
-    int i, shift;
-
-    for (i = 0, shift = 1; shift < bits; i++, shift <<= 1) {
-        if (rs2 & shift) {
-            x = do_swap(x, adjacent_masks[i], shift);
-        }
-    }
-
-    return x;
-}
-
-target_ulong HELPER(grev)(target_ulong rs1, target_ulong rs2)
-{
-    return do_grev(rs1, rs2, TARGET_LONG_BITS);
-}
-
-target_ulong HELPER(grevw)(target_ulong rs1, target_ulong rs2)
-{
-    return do_grev(rs1, rs2, 32);
-}
-
 target_ulong HELPER(clmul)(target_ulong rs1, target_ulong rs2)
 {
     target_ulong result = 0;
diff --git a/target/riscv/helper.h b/target/riscv/helper.h
index a9bda2c8ac..c7a5376227 100644
--- a/target/riscv/helper.h
+++ b/target/riscv/helper.h
@@ -59,8 +59,6 @@ DEF_HELPER_FLAGS_2(fcvt_d_lu, TCG_CALL_NO_RWG, i64, env, tl)
 DEF_HELPER_FLAGS_1(fclass_d, TCG_CALL_NO_RWG_SE, tl, i64)
 
 /* Bitmanip */
-DEF_HELPER_FLAGS_2(grev, TCG_CALL_NO_RWG_SE, tl, tl, tl)
-DEF_HELPER_FLAGS_2(grevw, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 DEF_HELPER_FLAGS_2(clmul, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 DEF_HELPER_FLAGS_2(clmulr, TCG_CALL_NO_RWG_SE, tl, tl, tl)
 
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index 59202196dc..901a66c0f5 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -683,6 +683,9 @@ min        0000101 .......... 100 ..... 0110011 @r
 minu       0000101 .......... 101 ..... 0110011 @r
 orc_b      001010 000111 ..... 101 ..... 0010011 @r2
 orn        0100000 .......... 110 ..... 0110011 @r
+# The encoding for rev8 differs between RV32 and RV64.
+# rev8_32 denotes the RV32 variant.
+rev8_32    011010 011000 ..... 101 ..... 0010011 @r2
 rol        0110000 .......... 001 ..... 0110011 @r
 ror        0110000 .......... 101 ..... 0110011 @r
 rori       01100 ............ 101 ..... 0010011 @sh
@@ -694,6 +697,10 @@ xnor       0100000 .......... 100 ..... 0110011 @r
 clzw       0110000 00000 ..... 001 ..... 0011011 @r2
 ctzw       0110000 00001 ..... 001 ..... 0011011 @r2
 cpopw      0110000 00010 ..... 001 ..... 0011011 @r2
+# The encoding for rev8 differs between RV32 and RV64.
+# When executing on RV64, the encoding used in RV32 is an illegal
+# instruction, so we use different handler functions to differentiate.
+rev8_64    011010 111000 ..... 101 ..... 0010011 @r2
 rolw       0110000 .......... 001 ..... 0111011 @r
 roriw      0110000 .......... 101 ..... 0011011 @sh5
 rorw       0110000 .......... 101 ..... 0111011 @r
@@ -702,15 +709,10 @@ rorw       0110000 .......... 101 ..... 0111011 @r
 pack       0000100 .......... 100 ..... 0110011 @r
 packu      0100100 .......... 100 ..... 0110011 @r
 packh      0000100 .......... 111 ..... 0110011 @r
-grev       0110100 .......... 101 ..... 0110011 @r
-grevi      01101. ........... 101 ..... 0010011 @sh
 
 # *** RV64B Standard Extension (in addition to RV32B) ***
 packw      0000100 .......... 100 ..... 0111011 @r
 packuw     0100100 .......... 100 ..... 0111011 @r
-grevw      0110100 .......... 101 ..... 0111011 @r
-
-greviw     0110100 .......... 101 ..... 0011011 @sh5
 
 # *** RV32 Zbc Standard Extension ***
 clmul      0000101 .......... 001 ..... 0110011 @r
diff --git a/target/riscv/insn_trans/trans_rvb.c.inc b/target/riscv/insn_trans/trans_rvb.c.inc
index 951b3d7073..201a2ffb4b 100644
--- a/target/riscv/insn_trans/trans_rvb.c.inc
+++ b/target/riscv/insn_trans/trans_rvb.c.inc
@@ -273,26 +273,18 @@ static bool trans_rol(DisasContext *ctx, arg_rol *a)
     return gen_shift(ctx, a, EXT_NONE, tcg_gen_rotl_tl);
 }
 
-static bool trans_grev(DisasContext *ctx, arg_grev *a)
+static bool trans_rev8_32(DisasContext *ctx, arg_rev8_32 *a)
 {
-    REQUIRE_EXT(ctx, RVB);
-    return gen_shift(ctx, a, EXT_NONE, gen_helper_grev);
-}
-
-static void gen_grevi(TCGv dest, TCGv src, target_long shamt)
-{
-    if (shamt == TARGET_LONG_BITS - 8) {
-        /* rev8, byte swaps */
-        tcg_gen_bswap_tl(dest, src);
-    } else {
-        gen_helper_grev(dest, src, tcg_constant_tl(shamt));
-    }
+    REQUIRE_32BIT(ctx);
+    REQUIRE_ZBB(ctx);
+    return gen_unary(ctx, a, EXT_NONE, tcg_gen_bswap_tl);
 }
 
-static bool trans_grevi(DisasContext *ctx, arg_grevi *a)
+static bool trans_rev8_64(DisasContext *ctx, arg_rev8_64 *a)
 {
-    REQUIRE_EXT(ctx, RVB);
-    return gen_shift_imm_fn(ctx, a, EXT_NONE, gen_grevi);
+    REQUIRE_64BIT(ctx);
+    REQUIRE_ZBB(ctx);
+    return gen_unary(ctx, a, EXT_NONE, tcg_gen_bswap_tl);
 }
 
 static void gen_orc_b(TCGv ret, TCGv source1)
@@ -471,22 +463,6 @@ static bool trans_rolw(DisasContext *ctx, arg_rolw *a)
     return gen_shift(ctx, a, EXT_NONE, gen_rolw);
 }
 
-static bool trans_grevw(DisasContext *ctx, arg_grevw *a)
-{
-    REQUIRE_64BIT(ctx);
-    REQUIRE_EXT(ctx, RVB);
-    ctx->w = true;
-    return gen_shift(ctx, a, EXT_ZERO, gen_helper_grev);
-}
-
-static bool trans_greviw(DisasContext *ctx, arg_greviw *a)
-{
-    REQUIRE_64BIT(ctx);
-    REQUIRE_EXT(ctx, RVB);
-    ctx->w = true;
-    return gen_shift_imm_tl(ctx, a, EXT_ZERO, gen_helper_grev);
-}
-
 #define GEN_SHADD_UW(SHAMT)                                       \
 static void gen_sh##SHAMT##add_uw(TCGv ret, TCGv arg1, TCGv arg2) \
 {                                                                 \
-- 
2.25.1



  parent reply	other threads:[~2021-09-11 14:06 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-11 14:00 [PATCH v11 00/16] target/riscv: Update QEmu for Zb[abcs] 1.0.0 Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 01/16] target/riscv: Introduce temporary in gen_add_uw() Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 02/16] target/riscv: fix clzw implementation to operate on arg1 Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 03/16] target/riscv: clwz must ignore high bits (use shift-left & changed logic) Philipp Tomsich
2021-09-14  9:15   ` LIU Zhiwei
2021-09-14 10:24     ` Philipp Tomsich
2021-09-15  8:11       ` LIU Zhiwei
2021-09-11 14:00 ` [PATCH v11 04/16] target/riscv: Add x-zba, x-zbb, x-zbc and x-zbs properties Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 05/16] target/riscv: Reassign instructions to the Zba-extension Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 06/16] target/riscv: Remove the W-form instructions from Zbs Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 07/16] target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B) Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 08/16] target/riscv: Reassign instructions to the Zbs-extension Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 09/16] target/riscv: Add instructions of the Zbc-extension Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 10/16] target/riscv: Reassign instructions to the Zbb-extension Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 11/16] target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci Philipp Tomsich
2021-09-28  7:06   ` Alistair Francis
2021-09-28 15:45     ` Philipp Tomsich
2021-09-28 18:45       ` Richard Henderson
2021-09-28 18:45         ` Philipp Tomsich
2021-09-28 21:00           ` Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 12/16] target/riscv: Add a REQUIRE_32BIT macro Philipp Tomsich
2021-09-11 14:00 ` Philipp Tomsich [this message]
2021-09-11 14:00 ` [PATCH v11 14/16] target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 15/16] target/riscv: Remove RVB (replaced by Zb[abcs]) Philipp Tomsich
2021-09-11 14:00 ` [PATCH v11 16/16] disas/riscv: Add Zb[abcs] instructions Philipp Tomsich
2021-09-23 21:31 ` [PATCH v11 00/16] target/riscv: Update QEmu for Zb[abcs] 1.0.0 Philipp Tomsich
2021-09-24  3:02   ` Alistair Francis
     [not found] ` <20210927200139.I7eoEgfBhWG60vy4RMFlcC9T5M5sfPH_jDWgYVbPfAE@z>
2021-09-27 20:01   ` Vineet Gupta
2021-09-27 20:23     ` Jim Wilson
2021-09-27 21:54       ` Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210911140016.834071-14-philipp.tomsich@vrull.eu \
    --to=philipp.tomsich@vrull.eu \
    --cc=alistair.francis@wdc.com \
    --cc=kito.cheng@sifive.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).