From: Laurent Vivier <lvivier@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Laurent Vivier <lvivier@redhat.com>,
Thomas Huth <thuth@redhat.com>,
qemu-block@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>,
Markus Armbruster <armbru@redhat.com>,
Hanna Reitz <hreitz@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [PATCH 2/3] qtest/libqos: add a function to initialize secondary PCI buses
Date: Wed, 10 Nov 2021 14:56:15 +0100 [thread overview]
Message-ID: <20211110135616.1188725-3-lvivier@redhat.com> (raw)
In-Reply-To: <20211110135616.1188725-1-lvivier@redhat.com>
Scan the PCI devices to find bridge and set PCI_SECONDARY_BUS and
PCI_SUBORDINATE_BUS (algorithm from seabios)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
---
include/hw/pci/pci_bridge.h | 8 +++
tests/qtest/libqos/pci.c | 118 ++++++++++++++++++++++++++++++++++++
tests/qtest/libqos/pci.h | 1 +
3 files changed, 127 insertions(+)
diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h
index a94d350034bf..30691a6e5728 100644
--- a/include/hw/pci/pci_bridge.h
+++ b/include/hw/pci/pci_bridge.h
@@ -138,6 +138,7 @@ typedef struct PCIBridgeQemuCap {
uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */
} PCIBridgeQemuCap;
+#define REDHAT_PCI_CAP_TYPE_OFFSET 3
#define REDHAT_PCI_CAP_RESOURCE_RESERVE 1
/*
@@ -152,6 +153,13 @@ typedef struct PCIResReserve {
uint64_t mem_pref_64;
} PCIResReserve;
+#define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES 4
+#define REDHAT_PCI_CAP_RES_RESERVE_IO 8
+#define REDHAT_PCI_CAP_RES_RESERVE_MEM 16
+#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20
+#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24
+#define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE 32
+
int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
PCIResReserve res_reserve, Error **errp);
diff --git a/tests/qtest/libqos/pci.c b/tests/qtest/libqos/pci.c
index e1e96189c821..3f0b18f4750b 100644
--- a/tests/qtest/libqos/pci.c
+++ b/tests/qtest/libqos/pci.c
@@ -13,6 +13,8 @@
#include "qemu/osdep.h"
#include "pci.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bridge.h"
#include "hw/pci/pci_regs.h"
#include "qemu/host-utils.h"
#include "qgraph.h"
@@ -99,6 +101,122 @@ void qpci_device_init(QPCIDevice *dev, QPCIBus *bus, QPCIAddress *addr)
g_assert(!addr->device_id || device_id == addr->device_id);
}
+static uint8_t qpci_find_resource_reserve_capability(QPCIDevice *dev)
+{
+ uint16_t device_id;
+ uint8_t cap = 0;
+
+ if (qpci_config_readw(dev, PCI_VENDOR_ID) != PCI_VENDOR_ID_REDHAT) {
+ return 0;
+ }
+
+ device_id = qpci_config_readw(dev, PCI_DEVICE_ID);
+
+ if (device_id != PCI_DEVICE_ID_REDHAT_PCIE_RP &&
+ device_id != PCI_DEVICE_ID_REDHAT_BRIDGE) {
+ return 0;
+ }
+
+ do {
+ cap = qpci_find_capability(dev, PCI_CAP_ID_VNDR, cap);
+ } while (cap &&
+ qpci_config_readb(dev, cap + REDHAT_PCI_CAP_TYPE_OFFSET) !=
+ REDHAT_PCI_CAP_RESOURCE_RESERVE);
+ if (cap) {
+ uint8_t cap_len = qpci_config_readb(dev, cap + PCI_CAP_FLAGS);
+ if (cap_len < REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE) {
+ return 0;
+ }
+ }
+ return cap;
+}
+
+static void qpci_secondary_buses_rec(QPCIBus *qbus, int bus, int *pci_bus)
+{
+ QPCIDevice *dev;
+ uint16_t class;
+ uint8_t pribus, secbus, subbus;
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ dev = qpci_device_find(qbus, QPCI_DEVFN(bus + i, 0));
+ if (dev == NULL) {
+ continue;
+ }
+ class = qpci_config_readw(dev, PCI_CLASS_DEVICE);
+ if (class == PCI_CLASS_BRIDGE_PCI) {
+ qpci_config_writeb(dev, PCI_SECONDARY_BUS, 255);
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, 0);
+ }
+ g_free(dev);
+ }
+
+ for (i = 0; i < 32; i++) {
+ dev = qpci_device_find(qbus, QPCI_DEVFN(bus + i, 0));
+ if (dev == NULL) {
+ continue;
+ }
+ class = qpci_config_readw(dev, PCI_CLASS_DEVICE);
+ if (class != PCI_CLASS_BRIDGE_PCI) {
+ continue;
+ }
+
+ pribus = qpci_config_readb(dev, PCI_PRIMARY_BUS);
+ if (pribus != bus) {
+ qpci_config_writeb(dev, PCI_PRIMARY_BUS, bus);
+ }
+
+ secbus = qpci_config_readb(dev, PCI_SECONDARY_BUS);
+ (*pci_bus)++;
+ if (*pci_bus != secbus) {
+ secbus = *pci_bus;
+ qpci_config_writeb(dev, PCI_SECONDARY_BUS, secbus);
+ }
+
+ subbus = qpci_config_readb(dev, PCI_SUBORDINATE_BUS);
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, 255);
+
+ qpci_secondary_buses_rec(qbus, secbus << 5, pci_bus);
+
+ if (subbus != *pci_bus) {
+ uint8_t res_bus = *pci_bus;
+ uint8_t cap = qpci_find_resource_reserve_capability(dev);
+
+ if (cap) {
+ uint32_t tmp_res_bus;
+
+ tmp_res_bus = qpci_config_readl(dev, cap +
+ REDHAT_PCI_CAP_RES_RESERVE_BUS_RES);
+ if (tmp_res_bus != (uint32_t)-1) {
+ res_bus = tmp_res_bus & 0xFF;
+ if ((uint8_t)(res_bus + secbus) < secbus ||
+ (uint8_t)(res_bus + secbus) < res_bus) {
+ res_bus = 0;
+ }
+ if (secbus + res_bus > *pci_bus) {
+ res_bus = secbus + res_bus;
+ }
+ }
+ }
+ subbus = res_bus;
+ *pci_bus = res_bus;
+ }
+
+ qpci_config_writeb(dev, PCI_SUBORDINATE_BUS, subbus);
+ g_free(dev);
+ }
+}
+
+int qpci_secondary_buses_init(QPCIBus *bus)
+{
+ int last_bus = 0;
+
+ qpci_secondary_buses_rec(bus, 0, &last_bus);
+
+ return last_bus;
+}
+
+
void qpci_device_enable(QPCIDevice *dev)
{
uint16_t cmd;
diff --git a/tests/qtest/libqos/pci.h b/tests/qtest/libqos/pci.h
index ee64fdecbda8..becb800f9e6a 100644
--- a/tests/qtest/libqos/pci.h
+++ b/tests/qtest/libqos/pci.h
@@ -81,6 +81,7 @@ void qpci_device_foreach(QPCIBus *bus, int vendor_id, int device_id,
void *data);
QPCIDevice *qpci_device_find(QPCIBus *bus, int devfn);
void qpci_device_init(QPCIDevice *dev, QPCIBus *bus, QPCIAddress *addr);
+int qpci_secondary_buses_init(QPCIBus *bus);
bool qpci_has_buggy_msi(QPCIDevice *dev);
bool qpci_check_buggy_msi(QPCIDevice *dev);
--
2.31.1
next prev parent reply other threads:[~2021-11-10 13:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-10 13:56 [PATCH 0/3] tests/qtest: add some tests for virtio-net failover Laurent Vivier
2021-11-10 13:56 ` [PATCH 1/3] qdict: make available dump_qobject(), dump_qdict(), dump_qlist() Laurent Vivier
2021-11-10 16:17 ` Markus Armbruster
2021-11-10 17:11 ` Laurent Vivier
2021-11-10 13:56 ` Laurent Vivier [this message]
2021-11-10 13:56 ` [PATCH 3/3] tests/qtest: add some tests for virtio-net failover Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211110135616.1188725-3-lvivier@redhat.com \
--to=lvivier@redhat.com \
--cc=armbru@redhat.com \
--cc=hreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).