[PULL 07/26] hw/i2c/bitbang_i2c: Convert DPRINTF() to trace events

[Peter Maydell <peter.maydell@linaro.org>]

From: Philippe Mathieu-Daudé <philmd@linaro.org>

Convert the remaining DPRINTF debug macro uses to tracepoints.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20230111085016.44551-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/i2c/bitbang_i2c.c | 18 ++++++------------
 hw/i2c/trace-events  |  4 ++++
 2 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/hw/i2c/bitbang_i2c.c b/hw/i2c/bitbang_i2c.c
index efc49b7502f..bb189547651 100644
--- a/hw/i2c/bitbang_i2c.c
+++ b/hw/i2c/bitbang_i2c.c
@@ -18,14 +18,6 @@
 #include "qom/object.h"
 #include "trace.h"
 
-//#define DEBUG_BITBANG_I2C
-
-#ifdef DEBUG_BITBANG_I2C
-#define DPRINTF(fmt, ...) \
-do { printf("bitbang_i2c: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#endif
 
 /* bitbang_i2c_state enum to name */
 static const char * const sname[] = {
@@ -71,8 +63,10 @@ static void bitbang_i2c_enter_stop(bitbang_i2c_interface *i2c)
 /* Set device data pin.  */
 static int bitbang_i2c_ret(bitbang_i2c_interface *i2c, int level)
 {
+    trace_bitbang_i2c_data(i2c->last_clock, i2c->last_data,
+                           i2c->device_out, level);
     i2c->device_out = level;
-    //DPRINTF("%d %d %d\n", i2c->last_clock, i2c->last_data, i2c->device_out);
+
     return level & i2c->last_data;
 }
 
@@ -137,11 +131,11 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
 
         if (i2c->current_addr < 0) {
             i2c->current_addr = i2c->buffer;
-            DPRINTF("Address 0x%02x\n", i2c->current_addr);
+            trace_bitbang_i2c_addr(i2c->current_addr);
             ret = i2c_start_transfer(i2c->bus, i2c->current_addr >> 1,
                                      i2c->current_addr & 1);
         } else {
-            DPRINTF("Sent 0x%02x\n", i2c->buffer);
+            trace_bitbang_i2c_send(i2c->buffer);
             ret = i2c_send(i2c->bus, i2c->buffer);
         }
         if (ret) {
@@ -161,7 +155,7 @@ int bitbang_i2c_set(bitbang_i2c_interface *i2c, int line, int level)
     }
     case RECEIVING_BIT7:
         i2c->buffer = i2c_recv(i2c->bus);
-        DPRINTF("RX byte 0x%02x\n", i2c->buffer);
+        trace_bitbang_i2c_recv(i2c->buffer);
         /* Fall through... */
     case RECEIVING_BIT6 ... RECEIVING_BIT0:
         data = i2c->buffer >> 7;
diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events
index 48aee4887c4..8e88aa24c1a 100644
--- a/hw/i2c/trace-events
+++ b/hw/i2c/trace-events
@@ -2,6 +2,10 @@
 
 # bitbang_i2c.c
 bitbang_i2c_state(const char *old_state, const char *new_state) "state %s -> %s"
+bitbang_i2c_addr(uint8_t addr) "Address 0x%02x"
+bitbang_i2c_send(uint8_t byte) "TX byte 0x%02x"
+bitbang_i2c_recv(uint8_t byte) "RX byte 0x%02x"
+bitbang_i2c_data(unsigned dat, unsigned clk, unsigned old_out, unsigned new_out) "dat %u clk %u out %u -> %u"
 
 # core.c
 
-- 
2.34.1