qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Finn Thain <fthain@linux-m68k.org>
To: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	David Gibson <david@gibson.dropbear.id.au>,
	Greg Kurz <groug@kaod.org>
Cc: qemu-ppc@nongnu.org, Laurent Vivier <laurent@vivier.eu>,
	qemu-devel@nongnu.org
Subject: [RFC 09/10] hw/mos6522: Avoid using discrepant QEMU clock values
Date: Tue, 24 Aug 2021 20:09:36 +1000	[thread overview]
Message-ID: <21f20ab5a100e4947d840080114f3f0511aade86.1629799776.git.fthain@linux-m68k.org> (raw)
In-Reply-To: <cover.1629799776.git.fthain@linux-m68k.org>

mos6522_read() and mos6522_write() may call various functions to determine
timer irq state, timer counter value and QEMUTimer deadline. All called
functions must use the same value for the present time.

Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
 hw/misc/mos6522.c | 51 +++++++++++++++++++++++++----------------------
 1 file changed, 27 insertions(+), 24 deletions(-)

diff --git a/hw/misc/mos6522.c b/hw/misc/mos6522.c
index 0dd3ccf945..23a440b64f 100644
--- a/hw/misc/mos6522.c
+++ b/hw/misc/mos6522.c
@@ -39,9 +39,9 @@
 /* XXX: implement all timer modes */
 
 static void mos6522_timer1_update(MOS6522State *s, MOS6522Timer *ti,
-                                  int64_t current_time);
+                                  int64_t now);
 static void mos6522_timer2_update(MOS6522State *s, MOS6522Timer *ti,
-                                  int64_t current_time);
+                                  int64_t now);
 
 static void mos6522_update_irq(MOS6522State *s)
 {
@@ -52,12 +52,12 @@ static void mos6522_update_irq(MOS6522State *s)
     }
 }
 
-static unsigned int get_counter(MOS6522State *s, MOS6522Timer *ti)
+static unsigned int get_counter(MOS6522State *s, MOS6522Timer *ti, int64_t now)
 {
     int64_t d;
     unsigned int counter;
 
-    d = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ti->load_time,
+    d = muldiv64(now - ti->load_time,
                  ti->frequency, NANOSECONDS_PER_SECOND);
 
     if (ti->index == 0) {
@@ -89,7 +89,7 @@ static void set_counter(MOS6522State *s, MOS6522Timer *ti, unsigned int val)
 }
 
 static int64_t get_next_irq_time(MOS6522State *s, MOS6522Timer *ti,
-                                 int64_t current_time)
+                                 int64_t now)
 {
     int64_t d, next_time;
     unsigned int counter;
@@ -99,7 +99,7 @@ static int64_t get_next_irq_time(MOS6522State *s, MOS6522Timer *ti,
     }
 
     /* current counter value */
-    d = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ti->load_time,
+    d = muldiv64(now - ti->load_time,
                  ti->frequency, NANOSECONDS_PER_SECOND);
 
     /* the timer goes down from latch to -1 (period of latch + 2) */
@@ -123,20 +123,19 @@ static int64_t get_next_irq_time(MOS6522State *s, MOS6522Timer *ti,
     trace_mos6522_get_next_irq_time(ti->latch, d, next_time - d);
     next_time = muldiv64(next_time, NANOSECONDS_PER_SECOND, ti->frequency) +
                          ti->load_time;
-
-    if (next_time <= current_time) {
-        next_time = current_time + 1;
-    }
     return next_time;
 }
 
 static void mos6522_timer1_update(MOS6522State *s, MOS6522Timer *ti,
-                                 int64_t current_time)
+                                  int64_t now)
 {
     if (!ti->timer) {
         return;
     }
-    ti->next_irq_time = get_next_irq_time(s, ti, current_time);
+    ti->next_irq_time = get_next_irq_time(s, ti, now);
+    if (ti->next_irq_time <= now) {
+        ti->next_irq_time = now + 1;
+    }
     if ((s->ier & T1_INT) == 0 ||
         ((s->acr & T1MODE) == T1MODE_ONESHOT && ti->oneshot_fired)) {
         timer_del(ti->timer);
@@ -146,12 +145,15 @@ static void mos6522_timer1_update(MOS6522State *s, MOS6522Timer *ti,
 }
 
 static void mos6522_timer2_update(MOS6522State *s, MOS6522Timer *ti,
-                                 int64_t current_time)
+                                  int64_t now)
 {
     if (!ti->timer) {
         return;
     }
-    ti->next_irq_time = get_next_irq_time(s, ti, current_time);
+    ti->next_irq_time = get_next_irq_time(s, ti, now);
+    if (ti->next_irq_time <= now) {
+        ti->next_irq_time = now + 1;
+    }
     if ((s->ier & T2_INT) == 0 || (s->acr & T2MODE) || ti->oneshot_fired) {
         timer_del(ti->timer);
     } else {
@@ -163,9 +165,10 @@ static void mos6522_timer1_expired(void *opaque)
 {
     MOS6522State *s = opaque;
     MOS6522Timer *ti = &s->timers[0];
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 
     ti->oneshot_fired = true;
-    mos6522_timer1_update(s, ti, ti->next_irq_time);
+    mos6522_timer1_update(s, ti, now);
     s->ifr |= T1_INT;
     mos6522_update_irq(s);
 }
@@ -174,9 +177,10 @@ static void mos6522_timer2_expired(void *opaque)
 {
     MOS6522State *s = opaque;
     MOS6522Timer *ti = &s->timers[1];
+    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 
     ti->oneshot_fired = true;
-    mos6522_timer2_update(s, ti, ti->next_irq_time);
+    mos6522_timer2_update(s, ti, now);
     s->ifr |= T2_INT;
     mos6522_update_irq(s);
 }
@@ -233,12 +237,12 @@ uint64_t mos6522_read(void *opaque, hwaddr addr, unsigned size)
         val = s->dira;
         break;
     case VIA_REG_T1CL:
-        val = get_counter(s, &s->timers[0]) & 0xff;
+        val = get_counter(s, &s->timers[0], now) & 0xff;
         s->ifr &= ~T1_INT;
         mos6522_update_irq(s);
         break;
     case VIA_REG_T1CH:
-        val = get_counter(s, &s->timers[0]) >> 8;
+        val = get_counter(s, &s->timers[0], now) >> 8;
         break;
     case VIA_REG_T1LL:
         val = s->timers[0].latch & 0xff;
@@ -247,12 +251,12 @@ uint64_t mos6522_read(void *opaque, hwaddr addr, unsigned size)
         val = (s->timers[0].latch >> 8) & 0xff;
         break;
     case VIA_REG_T2CL:
-        val = get_counter(s, &s->timers[1]) & 0xff;
+        val = get_counter(s, &s->timers[1], now) & 0xff;
         s->ifr &= ~T2_INT;
         mos6522_update_irq(s);
         break;
     case VIA_REG_T2CH:
-        val = get_counter(s, &s->timers[1]) >> 8;
+        val = get_counter(s, &s->timers[1], now) >> 8;
         break;
     case VIA_REG_SR:
         val = s->sr;
@@ -360,10 +364,9 @@ void mos6522_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
         }
         mos6522_update_irq(s);
         /* if IER is modified starts needed timers */
-        mos6522_timer1_update(s, &s->timers[0],
-                              qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
-        mos6522_timer2_update(s, &s->timers[1],
-                              qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+        now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+        mos6522_timer1_update(s, &s->timers[0], now);
+        mos6522_timer2_update(s, &s->timers[1], now);
         break;
     default:
         g_assert_not_reached();
-- 
2.26.3



  reply	other threads:[~2021-08-24 10:20 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24 10:09 [RFC 00/10] hw/mos6522: VIA timer emulation fixes and improvements Finn Thain
2021-08-24 10:09 ` Finn Thain [this message]
2021-08-24 10:28   ` [RFC 09/10] hw/mos6522: Avoid using discrepant QEMU clock values Philippe Mathieu-Daudé
2021-08-29  1:23     ` Finn Thain
2021-08-25  8:44   ` Mark Cave-Ayland
2021-08-29  1:55     ` Finn Thain
2021-08-24 10:09 ` [RFC 06/10] hw/mos6522: Implement oneshot mode Finn Thain
2021-08-25  8:18   ` Mark Cave-Ayland
2021-08-29  1:20     ` Finn Thain
2021-08-24 10:09 ` [RFC 01/10] hw/mos6522: Remove get_load_time() methods and functions Finn Thain
2021-08-24 10:29   ` Philippe Mathieu-Daudé
2021-08-25  6:55   ` Mark Cave-Ayland
2021-08-28  1:00     ` Finn Thain
2021-08-24 10:09 ` [RFC 08/10] hw/mos6522: Call mos6522_update_irq() when appropriate Finn Thain
2021-08-24 10:22   ` Philippe Mathieu-Daudé
2021-08-25  8:26   ` Mark Cave-Ayland
2021-08-24 10:09 ` [RFC 07/10] hw/mos6522: Fix initial timer counter reload Finn Thain
2021-08-25  8:23   ` Mark Cave-Ayland
2021-08-28  0:46     ` Finn Thain
2021-08-24 10:09 ` [RFC 10/10] hw/mos6522: Synchronize timer interrupt and timer counter Finn Thain
2021-08-25  8:52   ` Mark Cave-Ayland
2021-08-26  6:43     ` Finn Thain
2021-08-24 10:09 ` [RFC 04/10] hw/mos6522: Rename timer callback functions Finn Thain
2021-08-24 10:28   ` Philippe Mathieu-Daudé
2021-08-25  7:11   ` Mark Cave-Ayland
2021-08-26  7:42     ` Philippe Mathieu-Daudé
2021-08-24 10:09 ` [RFC 02/10] hw/mos6522: Remove get_counter_value() methods and functions Finn Thain
2021-08-24 10:29   ` Philippe Mathieu-Daudé
2021-08-24 10:09 ` [RFC 05/10] hw/mos6522: Don't clear T1 interrupt flag on latch write Finn Thain
2021-08-25  7:20   ` Mark Cave-Ayland
2021-08-26  5:21     ` Finn Thain
2021-09-01 14:32       ` Laurent Vivier
2021-09-01 22:26         ` Finn Thain
2021-08-24 10:09 ` [RFC 03/10] hw/mos6522: Remove redundant mos6522_timer1_update() calls Finn Thain
2021-08-25  7:09   ` Mark Cave-Ayland
2021-08-24 10:34 ` [RFC 00/10] hw/mos6522: VIA timer emulation fixes and improvements Philippe Mathieu-Daudé
2021-08-28  1:22   ` Finn Thain
2021-08-31 21:14     ` Mark Cave-Ayland
2021-08-31 22:44       ` Finn Thain
2021-09-01  7:57         ` Mark Cave-Ayland
2021-09-01  8:06           ` Mark Cave-Ayland
2021-09-10 17:29             ` Mark Cave-Ayland
2021-09-11  0:08               ` Finn Thain
2021-09-01  2:20       ` Finn Thain
2021-08-25  3:11 ` David Gibson
2021-08-25  9:10 ` Mark Cave-Ayland
2021-08-28  4:11   ` Finn Thain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=21f20ab5a100e4947d840080114f3f0511aade86.1629799776.git.fthain@linux-m68k.org \
    --to=fthain@linux-m68k.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=groug@kaod.org \
    --cc=laurent@vivier.eu \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).