From: Auger Eric <eric.auger@redhat.com>
To: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>,
qemu-devel@nongnu.org, qemu-arm@nongnu.org, imammedo@redhat.com
Cc: peter.maydell@linaro.org, sameo@linux.intel.com,
ard.biesheuvel@linaro.org, linuxarm@huawei.com,
xuwei5@hisilicon.com, shannon.zhaosl@gmail.com,
sebastien.boeuf@intel.com, lersek@redhat.com
Subject: Re: [Qemu-devel] [PATCH-for-4.2 v9 09/12] hw/arm: Use GED for system_powerdown event
Date: Mon, 2 Sep 2019 09:37:39 +0200 [thread overview]
Message-ID: <2c7eb5f4-3cb3-07db-5abb-b006b4854fa4@redhat.com> (raw)
In-Reply-To: <20190813210539.31164-10-shameerali.kolothum.thodi@huawei.com>
Hi Shameer,
On 8/13/19 11:05 PM, Shameer Kolothum wrote:
> For machines 4.2 or higher with ACPI boot use GED for system_powerdown
> event instead of GPIO. Guest boot with DT still uses GPIO.
>
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Eric
> ---
> v8 --> v9
> -Re-arranged patches 8 & 9 from v8 based on Igor's comments.
>
> v7 --> v8
> -Retained gpio based system_powerdown support for machines < 4.2.
> -Reuse of virt_powerdown_req() for ACPI GED use.
> -Dropped Eric's R-by for now because of above.
>
> ---
> hw/acpi/generic_event_device.c | 8 ++++++++
> hw/arm/virt-acpi-build.c | 6 +++---
> hw/arm/virt.c | 16 +++++++++++-----
> include/hw/acpi/acpi_dev_interface.h | 1 +
> include/hw/acpi/generic_event_device.h | 3 +++
> 5 files changed, 26 insertions(+), 8 deletions(-)
>
> diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c
> index f4c23470c2..d6d7b28cfd 100644
> --- a/hw/acpi/generic_event_device.c
> +++ b/hw/acpi/generic_event_device.c
> @@ -19,6 +19,7 @@
>
> static const uint32_t ged_supported_events[] = {
> ACPI_GED_MEM_HOTPLUG_EVT,
> + ACPI_GED_PWR_DOWN_EVT,
> };
>
> /*
> @@ -103,6 +104,11 @@ void build_ged_aml(Aml *table, const char *name, HotplugHandler *hotplug_dev,
> aml_append(if_ctx, aml_call0(MEMORY_DEVICES_CONTAINER "."
> MEMORY_SLOT_SCAN_METHOD));
> break;
> + case ACPI_GED_PWR_DOWN_EVT:
> + aml_append(if_ctx,
> + aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE),
> + aml_int(0x80)));
> + break;
> default:
> /*
> * Please make sure all the events in ged_supported_events[]
> @@ -189,6 +195,8 @@ static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev)
>
> if (ev & ACPI_MEMORY_HOTPLUG_STATUS) {
> sel = ACPI_GED_MEM_HOTPLUG_EVT;
> + } else if (ev & ACPI_POWER_DOWN_STATUS) {
> + sel = ACPI_GED_PWR_DOWN_EVT;
> } else {
> /* Unknown event. Return without generating interrupt. */
> warn_report("GED: Unsupported event %d. No irq injected", ev);
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index 6d697af2df..61b399dc58 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -49,7 +49,6 @@
> #include "kvm_arm.h"
>
> #define ARM_SPI_BASE 32
> -#define ACPI_POWER_BUTTON_DEVICE "PWRB"
>
> static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus)
> {
> @@ -739,13 +738,14 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
> (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS);
> acpi_dsdt_add_pci(scope, memmap, (irqmap[VIRT_PCIE] + ARM_SPI_BASE),
> vms->highmem, vms->highmem_ecam);
> - acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO],
> - (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
> if (vms->acpi_dev) {
> build_ged_aml(scope, "\\_SB."GED_DEVICE,
> HOTPLUG_HANDLER(vms->acpi_dev),
> irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY,
> memmap[VIRT_ACPI_GED].base);
> + } else {
> + acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO],
> + (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
> }
>
> if (vms->acpi_dev && ms->ram_slots) {
> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> index 0e75213b44..d49e1a583c 100644
> --- a/hw/arm/virt.c
> +++ b/hw/arm/virt.c
> @@ -528,7 +528,7 @@ static inline DeviceState *create_acpi_ged(VirtMachineState *vms, qemu_irq *pic)
> {
> DeviceState *dev;
> int irq = vms->irqmap[VIRT_ACPI_GED];
> - uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT;
> + uint32_t event = ACPI_GED_MEM_HOTPLUG_EVT | ACPI_GED_PWR_DOWN_EVT;
>
> dev = qdev_create(NULL, TYPE_ACPI_GED);
> qdev_prop_set_uint32(dev, "ged-event", event);
> @@ -783,8 +783,14 @@ static void create_rtc(const VirtMachineState *vms, qemu_irq *pic)
> static DeviceState *gpio_key_dev;
> static void virt_powerdown_req(Notifier *n, void *opaque)
> {
> - /* use gpio Pin 3 for power button event */
> - qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
> + VirtMachineState *s = container_of(n, VirtMachineState, powerdown_notifier);
> +
> + if (s->acpi_dev) {
> + acpi_send_event(s->acpi_dev, ACPI_POWER_DOWN_STATUS);
> + } else {
> + /* use gpio Pin 3 for power button event */
> + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
> + }
> }
>
> static void create_gpio(const VirtMachineState *vms, qemu_irq *pic)
> @@ -1712,10 +1718,10 @@ static void machvirt_init(MachineState *machine)
>
> create_pcie(vms, pic);
>
> - create_gpio(vms, pic);
> -
> if (has_ged && aarch64 && firmware_loaded && acpi_enabled) {
> vms->acpi_dev = create_acpi_ged(vms, pic);
> + } else {
> + create_gpio(vms, pic);
> }
>
> /* connect powerdown request */
> diff --git a/include/hw/acpi/acpi_dev_interface.h b/include/hw/acpi/acpi_dev_interface.h
> index 43ff119179..adcb3a816c 100644
> --- a/include/hw/acpi/acpi_dev_interface.h
> +++ b/include/hw/acpi/acpi_dev_interface.h
> @@ -11,6 +11,7 @@ typedef enum {
> ACPI_MEMORY_HOTPLUG_STATUS = 8,
> ACPI_NVDIMM_HOTPLUG_STATUS = 16,
> ACPI_VMGENID_CHANGE_STATUS = 32,
> + ACPI_POWER_DOWN_STATUS = 64,
> } AcpiEventStatusBits;
>
> #define TYPE_ACPI_DEVICE_IF "acpi-device-interface"
> diff --git a/include/hw/acpi/generic_event_device.h b/include/hw/acpi/generic_event_device.h
> index 2049e8d873..d157eac088 100644
> --- a/include/hw/acpi/generic_event_device.h
> +++ b/include/hw/acpi/generic_event_device.h
> @@ -62,6 +62,8 @@
> #include "hw/sysbus.h"
> #include "hw/acpi/memory_hotplug.h"
>
> +#define ACPI_POWER_BUTTON_DEVICE "PWRB"
> +
> #define TYPE_ACPI_GED "acpi-ged"
> #define ACPI_GED(obj) \
> OBJECT_CHECK(AcpiGedState, (obj), TYPE_ACPI_GED)
> @@ -79,6 +81,7 @@
> * through GED.
> */
> #define ACPI_GED_MEM_HOTPLUG_EVT 0x1
> +#define ACPI_GED_PWR_DOWN_EVT 0x2
>
> typedef struct GEDState {
> MemoryRegion io;
>
next prev parent reply other threads:[~2019-09-02 7:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 21:05 [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 01/12] hw/acpi: Make ACPI IO address space configurable Shameer Kolothum
2019-08-15 8:42 ` Shameerali Kolothum Thodi
2019-08-29 8:45 ` Igor Mammedov
2019-08-29 11:04 ` Shameerali Kolothum Thodi
2019-08-29 12:38 ` Igor Mammedov
2019-08-29 13:45 ` Shameerali Kolothum Thodi
2019-09-01 11:17 ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 02/12] hw/acpi: Do not create memory hotplug method when handler is not defined Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 03/12] hw/acpi: Add ACPI Generic Event Device Support Shameer Kolothum
2019-09-01 11:17 ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 04/12] hw/arm/virt: Add memory hotplug framework Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 05/12] hw/arm/virt: Add 4.2 machine type Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 06/12] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot Shameer Kolothum
2019-09-01 11:18 ` Auger Eric
2019-09-01 11:22 ` Auger Eric
2019-09-02 9:34 ` Shameerali Kolothum Thodi
2019-09-02 9:21 ` Shameerali Kolothum Thodi
2019-09-02 9:32 ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 07/12] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 08/12] hw/arm: Factor out powerdown notifier from GPIO Shameer Kolothum
2019-09-02 7:37 ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 09/12] hw/arm: Use GED for system_powerdown event Shameer Kolothum
2019-09-02 7:37 ` Auger Eric [this message]
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 10/12] docs/specs: Add ACPI GED documentation Shameer Kolothum
2019-09-01 11:20 ` Auger Eric
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 11/12] tests: add dummy ACPI tables for arm/virt board Shameer Kolothum
2019-08-13 21:05 ` [Qemu-devel] [PATCH-for-4.2 v9 12/12] tests: Add bios tests to arm/virt Shameer Kolothum
2019-08-14 6:46 ` [Qemu-devel] [PATCH-for-4.2 v9 00/12] ARM virt: ACPI memory hotplug support no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c7eb5f4-3cb3-07db-5abb-b006b4854fa4@redhat.com \
--to=eric.auger@redhat.com \
--cc=ard.biesheuvel@linaro.org \
--cc=imammedo@redhat.com \
--cc=lersek@redhat.com \
--cc=linuxarm@huawei.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-arm@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=sameo@linux.intel.com \
--cc=sebastien.boeuf@intel.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=shannon.zhaosl@gmail.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).