* [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
@ 2020-09-08 17:21 Laszlo Ersek
2020-09-08 18:14 ` Philippe Mathieu-Daudé
2020-09-10 10:23 ` Philippe Mathieu-Daudé
0 siblings, 2 replies; 7+ messages in thread
From: Laszlo Ersek @ 2020-09-08 17:21 UTC (permalink / raw)
To: qemu devel list; +Cc: Peter Maydell
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing.
Backslash-escapes may be necessary to prevent unintended parsing".
The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
lines on my system. A stand-alone backslash at EOL serves as line
continuation in a "parsed-literal" block. Therefore, escape the
backslashes that we want to appear as such in the formatted documentation.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!
docs/system/device-url-syntax.rst.inc | 8 +-
qemu-options.hx | 108 ++++++++++----------
2 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc
index 88d7a372a748..6f6ec8366b7a 100644
--- a/docs/system/device-url-syntax.rst.inc
+++ b/docs/system/device-url-syntax.rst.inc
@@ -25,8 +25,8 @@ These are specified using a special URL syntax.
.. parsed-literal::
- |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
- -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
+ |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\
+ -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\
-drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
Example (CHAP username/password via URL):
@@ -39,8 +39,8 @@ These are specified using a special URL syntax.
.. parsed-literal::
- LIBISCSI_CHAP_USERNAME="user" \
- LIBISCSI_CHAP_PASSWORD="password" \
+ LIBISCSI_CHAP_USERNAME="user" \\
+ LIBISCSI_CHAP_PASSWORD="password" \\
|qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
``NBD``
diff --git a/qemu-options.hx b/qemu-options.hx
index b0f020594eab..47f64be0c041 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -373,9 +373,9 @@ SRST
.. parsed-literal::
- |qemu_system| \
- -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
- -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ |qemu_system| \\
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk
ERST
@@ -1338,9 +1338,9 @@ SRST
.. parsed-literal::
- |qemu_system| \
- -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
- -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ |qemu_system| \\
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
-drive file=/dev/fdset/2,index=0,media=disk
You can connect a CDROM to the slave of ide0:
@@ -2593,7 +2593,7 @@ SRST
.. parsed-literal::
- |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \
+ |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
-netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
``smb=dir[,smbserver=addr]``
@@ -2703,15 +2703,15 @@ SRST
#launch a QEMU instance with two NICs, each one connected
#to a TAP device
- |qemu_system| linux.img \
- -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
+ |qemu_system| linux.img \\
+ -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
-netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
.. parsed-literal::
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
- |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \
+ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
-netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
``-netdev bridge,id=id[,br=bridge][,helper=helper]``
@@ -2749,12 +2749,12 @@ SRST
.. parsed-literal::
# launch a first QEMU instance
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,listen=:1234
# connect the network of this instance to the network of the first instance
- |qemu_system| linux.img \
- -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,connect=127.0.0.1:1234
``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
@@ -2776,16 +2776,16 @@ SRST
.. parsed-literal::
# launch one QEMU instance
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
- |qemu_system| linux.img \
- -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
-netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
- |qemu_system| linux.img \
- -device e1000,netdev=n3,mac=52:54:00:12:34:58 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
-netdev socket,id=n3,mcast=230.0.0.1:1234
Example (User Mode Linux compat.):
@@ -2793,8 +2793,8 @@ SRST
.. parsed-literal::
# launch QEMU instance (note mcast address selected is UML's default)
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML
/path/to/linux ubd0=/path/to/root_fs eth0=mcast
@@ -2803,8 +2803,8 @@ SRST
.. parsed-literal::
- |qemu_system| linux.img \
- -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ |qemu_system| linux.img \\
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
-netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``
@@ -2860,9 +2860,9 @@ SRST
# Setup tunnel on linux host using raw ip as encapsulation
# on 1.2.3.4
- ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \
+ ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\
encap udp udp_sport 16384 udp_dport 16384
- ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \
+ ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\
0xFFFFFFFF peer_session_id 0xFFFFFFFF
ifconfig vmtunnel0 mtu 1500
ifconfig vmtunnel0 up
@@ -2872,7 +2872,7 @@ SRST
# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
- |qemu_system| linux.img -device e1000,netdev=n1 \
+ |qemu_system| linux.img -device e1000,netdev=n1 \\
-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
@@ -4627,8 +4627,8 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
+ # |qemu_system| \\
+ -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
-fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``
@@ -4791,10 +4791,10 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- [...] \
- -object cryptodev-backend-builtin,id=cryptodev0 \
- -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
+ # |qemu_system| \\
+ [...] \\
+ -object cryptodev-backend-builtin,id=cryptodev0 \\
+ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...]
``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
@@ -4810,11 +4810,11 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- [...] \
- -chardev socket,id=chardev0,path=/path/to/socket \
- -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
- -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
+ # |qemu_system| \\
+ [...] \\
+ -chardev socket,id=chardev0,path=/path/to/socket \\
+ -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
+ -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
[...]
``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
@@ -4892,9 +4892,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- -object secret,id=secmaster0,format=base64,file=key.b64 \
- -object secret,id=sec0,keyid=secmaster0,format=base64,\
+ # |qemu_system| \\
+ -object secret,id=secmaster0,format=base64,file=key.b64 \\
+ -object secret,id=sec0,keyid=secmaster0,format=base64,\\
data=$SECRET,iv=$(<iv.b64)
``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``
@@ -4941,10 +4941,10 @@ SRST
.. parsed-literal::
- # |qemu_system_x86| \
- ......
- -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
- -machine ...,memory-encryption=sev0
+ # |qemu_system_x86| \\
+ ...... \\
+ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\
+ -machine ...,memory-encryption=sev0 \\
.....
``-object authz-simple,id=id,identity=string``
@@ -4962,9 +4962,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
+ # |qemu_system| \\
+ ... \\
+ -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\
...
Note the use of quotes due to the x509 distinguished name
@@ -5013,9 +5013,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
+ # |qemu_system| \\
+ ... \\
+ -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\
...
``-object authz-pam,id=id,service=string``
@@ -5032,9 +5032,9 @@ SRST
.. parsed-literal::
- # |qemu_system| \
- ...
- -object authz-pam,id=auth0,service=qemu-vnc
+ # |qemu_system| \\
+ ... \\
+ -object authz-pam,id=auth0,service=qemu-vnc \\
...
There would then be a corresponding config file for PAM at
--
2.19.1.3.g30247aa5d201
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-08 17:21 [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks Laszlo Ersek
@ 2020-09-08 18:14 ` Philippe Mathieu-Daudé
2020-09-09 11:09 ` Laszlo Ersek
2020-09-10 10:23 ` Philippe Mathieu-Daudé
1 sibling, 1 reply; 7+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-09-08 18:14 UTC (permalink / raw)
To: Laszlo Ersek, qemu devel list; +Cc: Peter Maydell
On 9/8/20 7:21 PM, Laszlo Ersek wrote:
> According to
> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
> "inline markup is recognized and there is no protection from parsing.
> Backslash-escapes may be necessary to prevent unintended parsing".
>
> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
> lines on my system. A stand-alone backslash at EOL serves as line
> continuation in a "parsed-literal" block. Therefore, escape the
> backslashes that we want to appear as such in the formatted documentation.
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> Resending with Peter's email address in the Cc: tag fixed. Sorry!
>
> docs/system/device-url-syntax.rst.inc | 8 +-
> qemu-options.hx | 108 ++++++++++----------
> 2 files changed, 58 insertions(+), 58 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-08 18:14 ` Philippe Mathieu-Daudé
@ 2020-09-09 11:09 ` Laszlo Ersek
0 siblings, 0 replies; 7+ messages in thread
From: Laszlo Ersek @ 2020-09-09 11:09 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu devel list; +Cc: Peter Maydell
On 09/08/20 20:14, Philippe Mathieu-Daudé wrote:
> On 9/8/20 7:21 PM, Laszlo Ersek wrote:
>> According to
>> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
>> "inline markup is recognized and there is no protection from parsing.
>> Backslash-escapes may be necessary to prevent unintended parsing".
>>
>> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
>> lines on my system. A stand-alone backslash at EOL serves as line
>> continuation in a "parsed-literal" block. Therefore, escape the
>> backslashes that we want to appear as such in the formatted documentation.
>>
>> Cc: Peter Maydell <peter.maydell@linaro.org>
>> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
>> ---
>>
>> Notes:
>> Resending with Peter's email address in the Cc: tag fixed. Sorry!
>>
>> docs/system/device-url-syntax.rst.inc | 8 +-
>> qemu-options.hx | 108 ++++++++++----------
>> 2 files changed, 58 insertions(+), 58 deletions(-)
>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>
Thanks for the quick check!
Laszlo
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-08 17:21 [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks Laszlo Ersek
2020-09-08 18:14 ` Philippe Mathieu-Daudé
@ 2020-09-10 10:23 ` Philippe Mathieu-Daudé
2020-09-15 7:57 ` Laszlo Ersek
1 sibling, 1 reply; 7+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-09-10 10:23 UTC (permalink / raw)
To: Laszlo Ersek, qemu devel list; +Cc: QEMU Trivial, Peter Maydell
Cc'ing qemu-trivial@
On 9/8/20 7:21 PM, Laszlo Ersek wrote:
> According to
> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
> "inline markup is recognized and there is no protection from parsing.
> Backslash-escapes may be necessary to prevent unintended parsing".
>
> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
> lines on my system. A stand-alone backslash at EOL serves as line
> continuation in a "parsed-literal" block. Therefore, escape the
> backslashes that we want to appear as such in the formatted documentation.
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> ---
>
> Notes:
> Resending with Peter's email address in the Cc: tag fixed. Sorry!
>
> docs/system/device-url-syntax.rst.inc | 8 +-
> qemu-options.hx | 108 ++++++++++----------
> 2 files changed, 58 insertions(+), 58 deletions(-)
>
> diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc
> index 88d7a372a748..6f6ec8366b7a 100644
> --- a/docs/system/device-url-syntax.rst.inc
> +++ b/docs/system/device-url-syntax.rst.inc
> @@ -25,8 +25,8 @@ These are specified using a special URL syntax.
>
> .. parsed-literal::
>
> - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
> - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
> + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\
> + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\
> -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
>
> Example (CHAP username/password via URL):
> @@ -39,8 +39,8 @@ These are specified using a special URL syntax.
>
> .. parsed-literal::
>
> - LIBISCSI_CHAP_USERNAME="user" \
> - LIBISCSI_CHAP_PASSWORD="password" \
> + LIBISCSI_CHAP_USERNAME="user" \\
> + LIBISCSI_CHAP_PASSWORD="password" \\
> |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
>
> ``NBD``
> diff --git a/qemu-options.hx b/qemu-options.hx
> index b0f020594eab..47f64be0c041 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -373,9 +373,9 @@ SRST
>
> .. parsed-literal::
>
> - |qemu_system| \
> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
> + |qemu_system| \\
> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
> -drive file=/dev/fdset/2,index=0,media=disk
> ERST
>
> @@ -1338,9 +1338,9 @@ SRST
>
> .. parsed-literal::
>
> - |qemu_system| \
> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
> + |qemu_system| \\
> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
> -drive file=/dev/fdset/2,index=0,media=disk
>
> You can connect a CDROM to the slave of ide0:
> @@ -2593,7 +2593,7 @@ SRST
>
> .. parsed-literal::
>
> - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \
> + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
> -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
>
> ``smb=dir[,smbserver=addr]``
> @@ -2703,15 +2703,15 @@ SRST
>
> #launch a QEMU instance with two NICs, each one connected
> #to a TAP device
> - |qemu_system| linux.img \
> - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
> + |qemu_system| linux.img \\
> + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
> -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
>
> .. parsed-literal::
>
> #launch a QEMU instance with the default network helper to
> #connect a TAP device to bridge br0
> - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \
> + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
> -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
>
> ``-netdev bridge,id=id[,br=bridge][,helper=helper]``
> @@ -2749,12 +2749,12 @@ SRST
> .. parsed-literal::
>
> # launch a first QEMU instance
> - |qemu_system| linux.img \
> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
> -netdev socket,id=n1,listen=:1234
> # connect the network of this instance to the network of the first instance
> - |qemu_system| linux.img \
> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
> -netdev socket,id=n2,connect=127.0.0.1:1234
>
> ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
> @@ -2776,16 +2776,16 @@ SRST
> .. parsed-literal::
>
> # launch one QEMU instance
> - |qemu_system| linux.img \
> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
> -netdev socket,id=n1,mcast=230.0.0.1:1234
> # launch another QEMU instance on same "bus"
> - |qemu_system| linux.img \
> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
> -netdev socket,id=n2,mcast=230.0.0.1:1234
> # launch yet another QEMU instance on same "bus"
> - |qemu_system| linux.img \
> - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
> -netdev socket,id=n3,mcast=230.0.0.1:1234
>
> Example (User Mode Linux compat.):
> @@ -2793,8 +2793,8 @@ SRST
> .. parsed-literal::
>
> # launch QEMU instance (note mcast address selected is UML's default)
> - |qemu_system| linux.img \
> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
> -netdev socket,id=n1,mcast=239.192.168.1:1102
> # launch UML
> /path/to/linux ubd0=/path/to/root_fs eth0=mcast
> @@ -2803,8 +2803,8 @@ SRST
>
> .. parsed-literal::
>
> - |qemu_system| linux.img \
> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
> + |qemu_system| linux.img \\
> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
> -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
>
> ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``
> @@ -2860,9 +2860,9 @@ SRST
>
> # Setup tunnel on linux host using raw ip as encapsulation
> # on 1.2.3.4
> - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \
> + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\
> encap udp udp_sport 16384 udp_dport 16384
> - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \
> + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\
> 0xFFFFFFFF peer_session_id 0xFFFFFFFF
> ifconfig vmtunnel0 mtu 1500
> ifconfig vmtunnel0 up
> @@ -2872,7 +2872,7 @@ SRST
> # on 4.3.2.1
> # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
>
> - |qemu_system| linux.img -device e1000,netdev=n1 \
> + |qemu_system| linux.img -device e1000,netdev=n1 \\
> -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
>
> ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
> @@ -4627,8 +4627,8 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
> + # |qemu_system| \\
> + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
> -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
>
> ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``
> @@ -4791,10 +4791,10 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - [...] \
> - -object cryptodev-backend-builtin,id=cryptodev0 \
> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
> + # |qemu_system| \\
> + [...] \\
> + -object cryptodev-backend-builtin,id=cryptodev0 \\
> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
> [...]
>
> ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
> @@ -4810,11 +4810,11 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - [...] \
> - -chardev socket,id=chardev0,path=/path/to/socket \
> - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
> + # |qemu_system| \\
> + [...] \\
> + -chardev socket,id=chardev0,path=/path/to/socket \\
> + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
> [...]
>
> ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
> @@ -4892,9 +4892,9 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - -object secret,id=secmaster0,format=base64,file=key.b64 \
> - -object secret,id=sec0,keyid=secmaster0,format=base64,\
> + # |qemu_system| \\
> + -object secret,id=secmaster0,format=base64,file=key.b64 \\
> + -object secret,id=sec0,keyid=secmaster0,format=base64,\\
> data=$SECRET,iv=$(<iv.b64)
>
> ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``
> @@ -4941,10 +4941,10 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system_x86| \
> - ......
> - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
> - -machine ...,memory-encryption=sev0
> + # |qemu_system_x86| \\
> + ...... \\
> + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\
> + -machine ...,memory-encryption=sev0 \\
> .....
>
> ``-object authz-simple,id=id,identity=string``
> @@ -4962,9 +4962,9 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - ...
> - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
> + # |qemu_system| \\
> + ... \\
> + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\
> ...
>
> Note the use of quotes due to the x509 distinguished name
> @@ -5013,9 +5013,9 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - ...
> - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
> + # |qemu_system| \\
> + ... \\
> + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\
> ...
>
> ``-object authz-pam,id=id,service=string``
> @@ -5032,9 +5032,9 @@ SRST
>
> .. parsed-literal::
>
> - # |qemu_system| \
> - ...
> - -object authz-pam,id=auth0,service=qemu-vnc
> + # |qemu_system| \\
> + ... \\
> + -object authz-pam,id=auth0,service=qemu-vnc \\
> ...
>
> There would then be a corresponding config file for PAM at
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-10 10:23 ` Philippe Mathieu-Daudé
@ 2020-09-15 7:57 ` Laszlo Ersek
2020-09-16 8:53 ` Laurent Vivier
0 siblings, 1 reply; 7+ messages in thread
From: Laszlo Ersek @ 2020-09-15 7:57 UTC (permalink / raw)
To: Philippe Mathieu-Daudé, qemu devel list; +Cc: QEMU Trivial, Peter Maydell
On 09/10/20 12:23, Philippe Mathieu-Daudé wrote:
> Cc'ing qemu-trivial@
Thanks!
The patch was posted a week ago (and reviewed as well, by you, thanks!)
-- is there something I need to do for getting this merged?
Thank you
Laszlo
> On 9/8/20 7:21 PM, Laszlo Ersek wrote:
>> According to
>> <https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
>> "inline markup is recognized and there is no protection from parsing.
>> Backslash-escapes may be necessary to prevent unintended parsing".
>>
>> The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong
>> lines on my system. A stand-alone backslash at EOL serves as line
>> continuation in a "parsed-literal" block. Therefore, escape the
>> backslashes that we want to appear as such in the formatted documentation.
>>
>> Cc: Peter Maydell <peter.maydell@linaro.org>
>> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
>> ---
>>
>> Notes:
>> Resending with Peter's email address in the Cc: tag fixed. Sorry!
>>
>> docs/system/device-url-syntax.rst.inc | 8 +-
>> qemu-options.hx | 108 ++++++++++----------
>> 2 files changed, 58 insertions(+), 58 deletions(-)
>>
>> diff --git a/docs/system/device-url-syntax.rst.inc b/docs/system/device-url-syntax.rst.inc
>> index 88d7a372a748..6f6ec8366b7a 100644
>> --- a/docs/system/device-url-syntax.rst.inc
>> +++ b/docs/system/device-url-syntax.rst.inc
>> @@ -25,8 +25,8 @@ These are specified using a special URL syntax.
>>
>> .. parsed-literal::
>>
>> - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \
>> - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \
>> + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\
>> + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\
>> -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
>>
>> Example (CHAP username/password via URL):
>> @@ -39,8 +39,8 @@ These are specified using a special URL syntax.
>>
>> .. parsed-literal::
>>
>> - LIBISCSI_CHAP_USERNAME="user" \
>> - LIBISCSI_CHAP_PASSWORD="password" \
>> + LIBISCSI_CHAP_USERNAME="user" \\
>> + LIBISCSI_CHAP_PASSWORD="password" \\
>> |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1
>>
>> ``NBD``
>> diff --git a/qemu-options.hx b/qemu-options.hx
>> index b0f020594eab..47f64be0c041 100644
>> --- a/qemu-options.hx
>> +++ b/qemu-options.hx
>> @@ -373,9 +373,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - |qemu_system| \
>> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
>> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
>> + |qemu_system| \\
>> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
>> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
>> -drive file=/dev/fdset/2,index=0,media=disk
>> ERST
>>
>> @@ -1338,9 +1338,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - |qemu_system| \
>> - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
>> - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
>> + |qemu_system| \\
>> + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\
>> + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\
>> -drive file=/dev/fdset/2,index=0,media=disk
>>
>> You can connect a CDROM to the slave of ide0:
>> @@ -2593,7 +2593,7 @@ SRST
>>
>> .. parsed-literal::
>>
>> - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \
>> + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\
>> -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
>>
>> ``smb=dir[,smbserver=addr]``
>> @@ -2703,15 +2703,15 @@ SRST
>>
>> #launch a QEMU instance with two NICs, each one connected
>> #to a TAP device
>> - |qemu_system| linux.img \
>> - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
>> + |qemu_system| linux.img \\
>> + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\
>> -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
>>
>> .. parsed-literal::
>>
>> #launch a QEMU instance with the default network helper to
>> #connect a TAP device to bridge br0
>> - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \
>> + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
>> -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
>>
>> ``-netdev bridge,id=id[,br=bridge][,helper=helper]``
>> @@ -2749,12 +2749,12 @@ SRST
>> .. parsed-literal::
>>
>> # launch a first QEMU instance
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
>> -netdev socket,id=n1,listen=:1234
>> # connect the network of this instance to the network of the first instance
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
>> -netdev socket,id=n2,connect=127.0.0.1:1234
>>
>> ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``
>> @@ -2776,16 +2776,16 @@ SRST
>> .. parsed-literal::
>>
>> # launch one QEMU instance
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
>> -netdev socket,id=n1,mcast=230.0.0.1:1234
>> # launch another QEMU instance on same "bus"
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\
>> -netdev socket,id=n2,mcast=230.0.0.1:1234
>> # launch yet another QEMU instance on same "bus"
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\
>> -netdev socket,id=n3,mcast=230.0.0.1:1234
>>
>> Example (User Mode Linux compat.):
>> @@ -2793,8 +2793,8 @@ SRST
>> .. parsed-literal::
>>
>> # launch QEMU instance (note mcast address selected is UML's default)
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
>> -netdev socket,id=n1,mcast=239.192.168.1:1102
>> # launch UML
>> /path/to/linux ubd0=/path/to/root_fs eth0=mcast
>> @@ -2803,8 +2803,8 @@ SRST
>>
>> .. parsed-literal::
>>
>> - |qemu_system| linux.img \
>> - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
>> + |qemu_system| linux.img \\
>> + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\
>> -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
>>
>> ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``
>> @@ -2860,9 +2860,9 @@ SRST
>>
>> # Setup tunnel on linux host using raw ip as encapsulation
>> # on 1.2.3.4
>> - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \
>> + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\
>> encap udp udp_sport 16384 udp_dport 16384
>> - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \
>> + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\
>> 0xFFFFFFFF peer_session_id 0xFFFFFFFF
>> ifconfig vmtunnel0 mtu 1500
>> ifconfig vmtunnel0 up
>> @@ -2872,7 +2872,7 @@ SRST
>> # on 4.3.2.1
>> # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
>>
>> - |qemu_system| linux.img -device e1000,netdev=n1 \
>> + |qemu_system| linux.img -device e1000,netdev=n1 \\
>> -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
>>
>> ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``
>> @@ -4627,8 +4627,8 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \
>> + # |qemu_system| \\
>> + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\
>> -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0
>>
>> ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``
>> @@ -4791,10 +4791,10 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - [...] \
>> - -object cryptodev-backend-builtin,id=cryptodev0 \
>> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
>> + # |qemu_system| \\
>> + [...] \\
>> + -object cryptodev-backend-builtin,id=cryptodev0 \\
>> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
>> [...]
>>
>> ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``
>> @@ -4810,11 +4810,11 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - [...] \
>> - -chardev socket,id=chardev0,path=/path/to/socket \
>> - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
>> - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
>> + # |qemu_system| \\
>> + [...] \\
>> + -chardev socket,id=chardev0,path=/path/to/socket \\
>> + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\
>> + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\
>> [...]
>>
>> ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``
>> @@ -4892,9 +4892,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - -object secret,id=secmaster0,format=base64,file=key.b64 \
>> - -object secret,id=sec0,keyid=secmaster0,format=base64,\
>> + # |qemu_system| \\
>> + -object secret,id=secmaster0,format=base64,file=key.b64 \\
>> + -object secret,id=sec0,keyid=secmaster0,format=base64,\\
>> data=$SECRET,iv=$(<iv.b64)
>>
>> ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``
>> @@ -4941,10 +4941,10 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system_x86| \
>> - ......
>> - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
>> - -machine ...,memory-encryption=sev0
>> + # |qemu_system_x86| \\
>> + ...... \\
>> + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\
>> + -machine ...,memory-encryption=sev0 \\
>> .....
>>
>> ``-object authz-simple,id=id,identity=string``
>> @@ -4962,9 +4962,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - ...
>> - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
>> + # |qemu_system| \\
>> + ... \\
>> + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\
>> ...
>>
>> Note the use of quotes due to the x509 distinguished name
>> @@ -5013,9 +5013,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - ...
>> - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
>> + # |qemu_system| \\
>> + ... \\
>> + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\
>> ...
>>
>> ``-object authz-pam,id=id,service=string``
>> @@ -5032,9 +5032,9 @@ SRST
>>
>> .. parsed-literal::
>>
>> - # |qemu_system| \
>> - ...
>> - -object authz-pam,id=auth0,service=qemu-vnc
>> + # |qemu_system| \\
>> + ... \\
>> + -object authz-pam,id=auth0,service=qemu-vnc \\
>> ...
>>
>> There would then be a corresponding config file for PAM at
>>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-15 7:57 ` Laszlo Ersek
@ 2020-09-16 8:53 ` Laurent Vivier
2020-09-16 13:31 ` Laszlo Ersek
0 siblings, 1 reply; 7+ messages in thread
From: Laurent Vivier @ 2020-09-16 8:53 UTC (permalink / raw)
To: Laszlo Ersek, Philippe Mathieu-Daudé, qemu devel list
Cc: QEMU Trivial, Peter Maydell
Le 15/09/2020 à 09:57, Laszlo Ersek a écrit :
> On 09/10/20 12:23, Philippe Mathieu-Daudé wrote:
>> Cc'ing qemu-trivial@
>
> Thanks!
>
> The patch was posted a week ago (and reviewed as well, by you, thanks!)
> -- is there something I need to do for getting this merged?
Applied to my trivial-patches branch.
Thanks,
Laurent
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks
2020-09-16 8:53 ` Laurent Vivier
@ 2020-09-16 13:31 ` Laszlo Ersek
0 siblings, 0 replies; 7+ messages in thread
From: Laszlo Ersek @ 2020-09-16 13:31 UTC (permalink / raw)
To: Laurent Vivier, Philippe Mathieu-Daudé, qemu devel list
Cc: QEMU Trivial, Peter Maydell
On 09/16/20 10:53, Laurent Vivier wrote:
> Le 15/09/2020 à 09:57, Laszlo Ersek a écrit :
>> On 09/10/20 12:23, Philippe Mathieu-Daudé wrote:
>>> Cc'ing qemu-trivial@
>>
>> Thanks!
>>
>> The patch was posted a week ago (and reviewed as well, by you, thanks!)
>> -- is there something I need to do for getting this merged?
>
> Applied to my trivial-patches branch.
Awesome, thanks!
Laszlo
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-09-16 13:33 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-08 17:21 [PATCH RESEND] manual: escape backslashes in "parsed-literal" blocks Laszlo Ersek
2020-09-08 18:14 ` Philippe Mathieu-Daudé
2020-09-09 11:09 ` Laszlo Ersek
2020-09-10 10:23 ` Philippe Mathieu-Daudé
2020-09-15 7:57 ` Laszlo Ersek
2020-09-16 8:53 ` Laurent Vivier
2020-09-16 13:31 ` Laszlo Ersek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).