* [PATCH v9 0/4] qcow2: Implement zstd cluster compression method
@ 2020-03-23 14:25 Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-23 14:25 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
v9:
* 01: fix error checking and reporting in qcow2_amend compression type part [Vladimir]
* 03: replace asserts with -EIO in qcow2_zstd_decompression [Vladimir, Alberto]
* 03: reword/amend/add comments, fix typos [Vladimir]
v8:
* 03: switch zstd API from simple to stream [Eric]
No need to state a special cluster layout for zstd
compressed clusters.
v7:
* use qapi_enum_parse instead of the open-coding [Eric]
* fix wording, typos and spelling [Eric]
v6:
* "block/qcow2-threads: fix qcow2_decompress" is removed from the series
since it has been accepted by Max already
* add compile time checking for Qcow2Header to be a multiple of 8 [Max, Alberto]
* report error on qcow2 amending when the compression type is actually chnged [Max]
* remove the extra space and the extra new line [Max]
* re-arrange acks and signed-off-s [Vladimir]
v5:
* replace -ENOTSUP with abort in qcow2_co_decompress [Vladimir]
* set cluster size for all test cases in the beginning of the 287 test
v4:
* the series is rebased on top of 01 "block/qcow2-threads: fix qcow2_decompress"
* 01 is just a no-change resend to avoid extra dependencies. Still, it may be merged in separate
v3:
* remove redundant max compression type value check [Vladimir, Eric]
(the switch below checks everything)
* prevent compression type changing on "qemu-img amend" [Vladimir]
* remove zstd config setting, since it has been added already by
"migration" patches [Vladimir]
* change the compression type error message [Vladimir]
* fix alignment and 80-chars exceeding [Vladimir]
v2:
* rework compression type setting [Vladimir]
* squash iotest changes to the compression type introduction patch [Vladimir, Eric]
* fix zstd availability checking in zstd iotest [Vladimir]
* remove unnecessry casting [Eric]
* remove rudundant checks [Eric]
* fix compressed cluster layout in qcow2 spec [Vladimir]
* fix wording [Eric, Vladimir]
* fix compression type filtering in iotests [Eric]
v1:
the initial series
Denis Plotnikov (4):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression
iotests: 287: add qcow2 compression type test
docs/interop/qcow2.txt | 1 +
configure | 2 +-
qapi/block-core.json | 23 +++-
block/qcow2.h | 20 ++-
include/block/block_int.h | 1 +
block/qcow2-threads.c | 205 +++++++++++++++++++++++++++++--
block/qcow2.c | 120 ++++++++++++++++++
tests/qemu-iotests/031.out | 14 +--
tests/qemu-iotests/036.out | 4 +-
tests/qemu-iotests/049.out | 102 +++++++--------
tests/qemu-iotests/060.out | 1 +
tests/qemu-iotests/061.out | 34 ++---
tests/qemu-iotests/065 | 28 +++--
tests/qemu-iotests/080 | 2 +-
tests/qemu-iotests/144.out | 4 +-
tests/qemu-iotests/182.out | 2 +-
tests/qemu-iotests/242.out | 5 +
tests/qemu-iotests/255.out | 8 +-
tests/qemu-iotests/287 | 128 +++++++++++++++++++
tests/qemu-iotests/287.out | 43 +++++++
tests/qemu-iotests/common.filter | 3 +-
tests/qemu-iotests/group | 1 +
22 files changed, 643 insertions(+), 108 deletions(-)
create mode 100755 tests/qemu-iotests/287
create mode 100644 tests/qemu-iotests/287.out
--
2.17.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v9 1/4] qcow2: introduce compression type feature
2020-03-23 14:25 [PATCH v9 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
@ 2020-03-23 14:25 ` Denis Plotnikov
2020-03-23 15:59 ` Vladimir Sementsov-Ogievskiy
2020-03-30 15:06 ` Markus Armbruster
2020-03-23 14:25 ` [PATCH v9 2/4] qcow2: rework the cluster compression routine Denis Plotnikov
` (2 subsequent siblings)
3 siblings, 2 replies; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-23 14:25 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 144, 182, 242, 255
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
---
qapi/block-core.json | 22 +++++-
block/qcow2.h | 20 +++++-
include/block/block_int.h | 1 +
block/qcow2.c | 113 +++++++++++++++++++++++++++++++
tests/qemu-iotests/031.out | 14 ++--
tests/qemu-iotests/036.out | 4 +-
tests/qemu-iotests/049.out | 102 ++++++++++++++--------------
tests/qemu-iotests/060.out | 1 +
tests/qemu-iotests/061.out | 34 ++++++----
tests/qemu-iotests/065 | 28 +++++---
tests/qemu-iotests/080 | 2 +-
tests/qemu-iotests/144.out | 4 +-
tests/qemu-iotests/182.out | 2 +-
tests/qemu-iotests/242.out | 5 ++
tests/qemu-iotests/255.out | 8 +--
tests/qemu-iotests/common.filter | 3 +-
16 files changed, 267 insertions(+), 96 deletions(-)
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 85e27bb61f..a306484973 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -78,6 +78,8 @@
#
# @bitmaps: A list of qcow2 bitmap details (since 4.0)
#
+# @compression-type: the image cluster compression method (since 5.0)
+#
# Since: 1.7
##
{ 'struct': 'ImageInfoSpecificQCow2',
@@ -89,7 +91,8 @@
'*corrupt': 'bool',
'refcount-bits': 'int',
'*encrypt': 'ImageInfoSpecificQCow2Encryption',
- '*bitmaps': ['Qcow2BitmapInfo']
+ '*bitmaps': ['Qcow2BitmapInfo'],
+ 'compression-type': 'Qcow2CompressionType'
} }
##
@@ -4392,6 +4395,18 @@
'data': [ 'v2', 'v3' ] }
+##
+# @Qcow2CompressionType:
+#
+# Compression type used in qcow2 image file
+#
+# @zlib: zlib compression, see <http://zlib.net/>
+#
+# Since: 5.0
+##
+{ 'enum': 'Qcow2CompressionType',
+ 'data': [ 'zlib' ] }
+
##
# @BlockdevCreateOptionsQcow2:
#
@@ -4415,6 +4430,8 @@
# allowed values: off, falloc, full, metadata)
# @lazy-refcounts: True if refcounts may be updated lazily (default: off)
# @refcount-bits: Width of reference counts in bits (default: 16)
+# @compression-type: The image cluster compression method
+# (default: zlib, since 5.0)
#
# Since: 2.12
##
@@ -4430,7 +4447,8 @@
'*cluster-size': 'size',
'*preallocation': 'PreallocMode',
'*lazy-refcounts': 'bool',
- '*refcount-bits': 'int' } }
+ '*refcount-bits': 'int',
+ '*compression-type':'Qcow2CompressionType' } }
##
# @BlockdevCreateOptionsQed:
diff --git a/block/qcow2.h b/block/qcow2.h
index 0942126232..cb6bf2ab83 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -146,8 +146,16 @@ typedef struct QCowHeader {
uint32_t refcount_order;
uint32_t header_length;
+
+ /* Additional fields */
+ uint8_t compression_type;
+
+ /* header must be a multiple of 8 */
+ uint8_t padding[7];
} QEMU_PACKED QCowHeader;
+QEMU_BUILD_BUG_ON(sizeof(QCowHeader) % 8 != 0);
+
typedef struct QEMU_PACKED QCowSnapshotHeader {
/* header is 8 byte aligned */
uint64_t l1_table_offset;
@@ -216,13 +224,16 @@ enum {
QCOW2_INCOMPAT_DIRTY_BITNR = 0,
QCOW2_INCOMPAT_CORRUPT_BITNR = 1,
QCOW2_INCOMPAT_DATA_FILE_BITNR = 2,
+ QCOW2_INCOMPAT_COMPRESSION_BITNR = 3,
QCOW2_INCOMPAT_DIRTY = 1 << QCOW2_INCOMPAT_DIRTY_BITNR,
QCOW2_INCOMPAT_CORRUPT = 1 << QCOW2_INCOMPAT_CORRUPT_BITNR,
QCOW2_INCOMPAT_DATA_FILE = 1 << QCOW2_INCOMPAT_DATA_FILE_BITNR,
+ QCOW2_INCOMPAT_COMPRESSION = 1 << QCOW2_INCOMPAT_COMPRESSION_BITNR,
QCOW2_INCOMPAT_MASK = QCOW2_INCOMPAT_DIRTY
| QCOW2_INCOMPAT_CORRUPT
- | QCOW2_INCOMPAT_DATA_FILE,
+ | QCOW2_INCOMPAT_DATA_FILE
+ | QCOW2_INCOMPAT_COMPRESSION,
};
/* Compatible feature bits */
@@ -369,6 +380,13 @@ typedef struct BDRVQcow2State {
bool metadata_preallocation_checked;
bool metadata_preallocation;
+ /*
+ * Compression type used for the image. Default: 0 - ZLIB
+ * The image compression type is set on image creation.
+ * For now, the only way to change the compression type
+ * is to convert the image with the desired compression type set.
+ */
+ Qcow2CompressionType compression_type;
} BDRVQcow2State;
typedef struct Qcow2COWRegion {
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 6f9fd5e20e..2c6bb9dc99 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -57,6 +57,7 @@
#define BLOCK_OPT_REFCOUNT_BITS "refcount_bits"
#define BLOCK_OPT_DATA_FILE "data_file"
#define BLOCK_OPT_DATA_FILE_RAW "data_file_raw"
+#define BLOCK_OPT_COMPRESSION_TYPE "compression_type"
#define BLOCK_PROBE_BUF_SIZE 512
diff --git a/block/qcow2.c b/block/qcow2.c
index 3c754f616b..eb30cfe811 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1242,6 +1242,39 @@ static int qcow2_update_options(BlockDriverState *bs, QDict *options,
return ret;
}
+static int validate_compression_type(BDRVQcow2State *s, Error **errp)
+{
+ switch (s->compression_type) {
+ case QCOW2_COMPRESSION_TYPE_ZLIB:
+ break;
+
+ default:
+ error_setg(errp, "qcow2: unknown compression type: %u",
+ s->compression_type);
+ return -ENOTSUP;
+ }
+
+ /*
+ * if the compression type differs from QCOW2_COMPRESSION_TYPE_ZLIB
+ * the incompatible feature flag must be set
+ */
+ if (s->compression_type == QCOW2_COMPRESSION_TYPE_ZLIB) {
+ if (s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION) {
+ error_setg(errp, "qcow2: Compression type incompatible feature "
+ "bit must not be set");
+ return -EINVAL;
+ }
+ } else {
+ if (!(s->incompatible_features & QCOW2_INCOMPAT_COMPRESSION)) {
+ error_setg(errp, "qcow2: Compression type incompatible feature "
+ "bit must be set");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/* Called with s->lock held. */
static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options,
int flags, Error **errp)
@@ -1357,6 +1390,23 @@ static int coroutine_fn qcow2_do_open(BlockDriverState *bs, QDict *options,
s->compatible_features = header.compatible_features;
s->autoclear_features = header.autoclear_features;
+ /*
+ * Handle compression type
+ * Older qcow2 images don't contain the compression type header.
+ * Distinguish them by the header length and use
+ * the only valid (default) compression type in that case
+ */
+ if (header.header_length > offsetof(QCowHeader, compression_type)) {
+ s->compression_type = header.compression_type;
+ } else {
+ s->compression_type = QCOW2_COMPRESSION_TYPE_ZLIB;
+ }
+
+ ret = validate_compression_type(s, errp);
+ if (ret) {
+ goto fail;
+ }
+
if (s->incompatible_features & ~QCOW2_INCOMPAT_MASK) {
void *feature_table = NULL;
qcow2_read_extensions(bs, header.header_length, ext_end,
@@ -2720,6 +2770,11 @@ int qcow2_update_header(BlockDriverState *bs)
total_size = bs->total_sectors * BDRV_SECTOR_SIZE;
refcount_table_clusters = s->refcount_table_size >> (s->cluster_bits - 3);
+ ret = validate_compression_type(s, NULL);
+ if (ret) {
+ goto fail;
+ }
+
*header = (QCowHeader) {
/* Version 2 fields */
.magic = cpu_to_be32(QCOW_MAGIC),
@@ -2742,6 +2797,7 @@ int qcow2_update_header(BlockDriverState *bs)
.autoclear_features = cpu_to_be64(s->autoclear_features),
.refcount_order = cpu_to_be32(s->refcount_order),
.header_length = cpu_to_be32(header_length),
+ .compression_type = s->compression_type,
};
/* For older versions, write a shorter header */
@@ -2834,6 +2890,11 @@ int qcow2_update_header(BlockDriverState *bs)
.bit = QCOW2_INCOMPAT_DATA_FILE_BITNR,
.name = "external data file",
},
+ {
+ .type = QCOW2_FEAT_TYPE_INCOMPATIBLE,
+ .bit = QCOW2_INCOMPAT_COMPRESSION_BITNR,
+ .name = "compression type",
+ },
{
.type = QCOW2_FEAT_TYPE_COMPATIBLE,
.bit = QCOW2_COMPAT_LAZY_REFCOUNTS_BITNR,
@@ -3262,6 +3323,7 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp)
uint64_t* refcount_table;
Error *local_err = NULL;
int ret;
+ uint8_t compression_type = QCOW2_COMPRESSION_TYPE_ZLIB;
assert(create_options->driver == BLOCKDEV_DRIVER_QCOW2);
qcow2_opts = &create_options->u.qcow2;
@@ -3379,6 +3441,27 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp)
}
}
+ if (qcow2_opts->has_compression_type &&
+ qcow2_opts->compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) {
+
+ ret = -EINVAL;
+
+ if (version < 3) {
+ error_setg(errp, "Non-zlib compression type is only supported with "
+ "compatibility level 1.1 and above (use version=v3 or "
+ "greater)");
+ goto out;
+ }
+
+ switch (qcow2_opts->compression_type) {
+ default:
+ error_setg(errp, "Unknown compression type");
+ goto out;
+ }
+
+ compression_type = qcow2_opts->compression_type;
+ }
+
/* Create BlockBackend to write to the image */
blk = blk_new(bdrv_get_aio_context(bs),
BLK_PERM_WRITE | BLK_PERM_RESIZE, BLK_PERM_ALL);
@@ -3401,6 +3484,8 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp)
.refcount_table_offset = cpu_to_be64(cluster_size),
.refcount_table_clusters = cpu_to_be32(1),
.refcount_order = cpu_to_be32(refcount_order),
+ /* don't deal with endianness since compression_type is 1 byte long */
+ .compression_type = compression_type,
.header_length = cpu_to_be32(sizeof(*header)),
};
@@ -3419,6 +3504,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp)
header->autoclear_features |=
cpu_to_be64(QCOW2_AUTOCLEAR_DATA_FILE_RAW);
}
+ if (compression_type != QCOW2_COMPRESSION_TYPE_ZLIB) {
+ header->incompatible_features |=
+ cpu_to_be64(QCOW2_INCOMPAT_COMPRESSION);
+ }
ret = blk_pwrite(blk, 0, header, cluster_size, 0);
g_free(header);
@@ -3602,6 +3691,7 @@ static int coroutine_fn qcow2_co_create_opts(const char *filename, QemuOpts *opt
{ BLOCK_OPT_ENCRYPT, BLOCK_OPT_ENCRYPT_FORMAT },
{ BLOCK_OPT_COMPAT_LEVEL, "version" },
{ BLOCK_OPT_DATA_FILE_RAW, "data-file-raw" },
+ { BLOCK_OPT_COMPRESSION_TYPE, "compression-type" },
{ NULL, NULL },
};
@@ -4859,6 +4949,7 @@ static ImageInfoSpecific *qcow2_get_specific_info(BlockDriverState *bs,
.data_file = g_strdup(s->image_data_file),
.has_data_file_raw = has_data_file(bs),
.data_file_raw = data_file_is_raw(bs),
+ .compression_type = s->compression_type,
};
} else {
/* if this assertion fails, this probably means a new version was
@@ -5248,6 +5339,22 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
"images");
return -EINVAL;
}
+ } else if (!strcmp(desc->name, BLOCK_OPT_COMPRESSION_TYPE)) {
+ const char *ct_name =
+ qemu_opt_get(opts, BLOCK_OPT_COMPRESSION_TYPE);
+ int compression_type =
+ qapi_enum_parse(&Qcow2CompressionType_lookup, ct_name, -1,
+ NULL);
+ if (compression_type == -1) {
+ error_setg(errp, "Unknown compression type: %s", ct_name);
+ return -ENOTSUP;
+ }
+
+ if (compression_type != s->compression_type) {
+ error_setg(errp, "Changing the compression type "
+ "is not supported");
+ return -ENOTSUP;
+ }
} else {
/* if this point is reached, this probably means a new option was
* added without having it covered here */
@@ -5516,6 +5623,12 @@ static QemuOptsList qcow2_create_opts = {
.help = "Width of a reference count entry in bits",
.def_value_str = "16"
},
+ {
+ .name = BLOCK_OPT_COMPRESSION_TYPE,
+ .type = QEMU_OPT_STRING,
+ .help = "Compression method used for image cluster compression",
+ .def_value_str = "zlib"
+ },
{ /* end of list */ }
}
};
diff --git a/tests/qemu-iotests/031.out b/tests/qemu-iotests/031.out
index d535e407bc..ed51afe9ce 100644
--- a/tests/qemu-iotests/031.out
+++ b/tests/qemu-iotests/031.out
@@ -113,11 +113,11 @@ incompatible_features []
compatible_features []
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
Header extension:
@@ -146,11 +146,11 @@ incompatible_features []
compatible_features []
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
Header extension:
@@ -164,7 +164,7 @@ No errors were found on the image.
magic 0x514649fb
version 3
-backing_file_offset 0x178
+backing_file_offset 0x1b0
backing_file_size 0x17
cluster_bits 16
size 67108864
@@ -179,7 +179,7 @@ incompatible_features []
compatible_features []
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0xe2792aca
@@ -188,7 +188,7 @@ data 'host_device'
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
Header extension:
diff --git a/tests/qemu-iotests/036.out b/tests/qemu-iotests/036.out
index 0b52b934e1..fb509f6357 100644
--- a/tests/qemu-iotests/036.out
+++ b/tests/qemu-iotests/036.out
@@ -26,7 +26,7 @@ compatible_features []
autoclear_features [63]
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
@@ -38,7 +38,7 @@ compatible_features []
autoclear_features []
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
*** done
diff --git a/tests/qemu-iotests/049.out b/tests/qemu-iotests/049.out
index affa55b341..a5cfba1756 100644
--- a/tests/qemu-iotests/049.out
+++ b/tests/qemu-iotests/049.out
@@ -4,90 +4,90 @@ QA output created by 049
== 1. Traditional size parameter ==
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024b
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1k
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1K
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1T
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1024.0b
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5k
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5K
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 TEST_DIR/t.qcow2 1.5T
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== 2. Specifying size via -o ==
qemu-img create -f qcow2 -o size=1024 TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1024b TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1k TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1K TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1M TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1048576 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1G TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1073741824 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1T TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1099511627776 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1024.0 TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1024.0b TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1024 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1.5k TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1.5K TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1536 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1.5M TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1572864 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1.5G TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1610612736 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o size=1.5T TEST_DIR/t.qcow2
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=1649267441664 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== 3. Invalid sizes ==
@@ -129,84 +129,84 @@ qemu-img: TEST_DIR/t.qcow2: The image size must be specified only once
== Check correct interpretation of suffixes for cluster size ==
qemu-img create -f qcow2 -o cluster_size=1024 TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1024b TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1k TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1K TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1M TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1048576 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1024.0 TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=1024.0b TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=1024 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=0.5k TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=0.5K TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=512 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o cluster_size=0.5M TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=524288 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== Check compat level option ==
qemu-img create -f qcow2 -o compat=0.10 TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=1.1 TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=0.42 TEST_DIR/t.qcow2 64M
qemu-img: TEST_DIR/t.qcow2: Invalid parameter '0.42'
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.42 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=foobar TEST_DIR/t.qcow2 64M
qemu-img: TEST_DIR/t.qcow2: Invalid parameter 'foobar'
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=foobar cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== Check preallocation option ==
qemu-img create -f qcow2 -o preallocation=off TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=off lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o preallocation=metadata TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=metadata lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o preallocation=1234 TEST_DIR/t.qcow2 64M
qemu-img: TEST_DIR/t.qcow2: Invalid parameter '1234'
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 cluster_size=65536 preallocation=1234 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== Check encryption option ==
qemu-img create -f qcow2 -o encryption=off TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 --object secret,id=sec0,data=123456 -o encryption=on,encrypt.key-secret=sec0 TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 encryption=on encrypt.key-secret=sec0 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
== Check lazy_refcounts option (only with v3) ==
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=off TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=1.1 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=off TEST_DIR/t.qcow2 64M
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
qemu-img create -f qcow2 -o compat=0.10,lazy_refcounts=on TEST_DIR/t.qcow2 64M
qemu-img: TEST_DIR/t.qcow2: Lazy refcounts only supported with compatibility level 1.1 and above (use version=v3 or greater)
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 compat=0.10 cluster_size=65536 lazy_refcounts=on refcount_bits=16 compression_type=zlib
*** done
diff --git a/tests/qemu-iotests/060.out b/tests/qemu-iotests/060.out
index d27692a33c..3e47f537e8 100644
--- a/tests/qemu-iotests/060.out
+++ b/tests/qemu-iotests/060.out
@@ -17,6 +17,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
corrupt: true
diff --git a/tests/qemu-iotests/061.out b/tests/qemu-iotests/061.out
index 8b3091a412..c913f02ad6 100644
--- a/tests/qemu-iotests/061.out
+++ b/tests/qemu-iotests/061.out
@@ -22,11 +22,11 @@ incompatible_features []
compatible_features [0]
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
magic 0x514649fb
@@ -80,11 +80,11 @@ incompatible_features []
compatible_features [0]
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
magic 0x514649fb
@@ -136,11 +136,11 @@ incompatible_features [0]
compatible_features [0]
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
ERROR cluster 5 refcount=0 reference=1
@@ -191,11 +191,11 @@ incompatible_features []
compatible_features [42]
autoclear_features [42]
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
magic 0x514649fb
@@ -260,11 +260,11 @@ incompatible_features []
compatible_features [0]
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
read 65536/65536 bytes at offset 44040192
@@ -294,11 +294,11 @@ incompatible_features [0]
compatible_features [0]
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
ERROR cluster 5 refcount=0 reference=1
@@ -323,11 +323,11 @@ incompatible_features []
compatible_features []
autoclear_features []
refcount_order 4
-header_length 104
+header_length 112
Header extension:
magic 0x6803f857
-length 192
+length 240
data <binary>
read 131072/131072 bytes at offset 0
@@ -491,6 +491,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file: TEST_DIR/t.IMGFMT.data
@@ -511,6 +512,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file: foo
@@ -524,6 +526,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file raw: false
@@ -538,6 +541,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file: TEST_DIR/t.IMGFMT.data
@@ -550,6 +554,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file: TEST_DIR/t.IMGFMT.data
@@ -563,6 +568,7 @@ virtual size: 64 MiB (67108864 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
data file: TEST_DIR/t.IMGFMT.data
diff --git a/tests/qemu-iotests/065 b/tests/qemu-iotests/065
index 6426474271..18dc488c7a 100755
--- a/tests/qemu-iotests/065
+++ b/tests/qemu-iotests/065
@@ -88,24 +88,30 @@ class TestQMP(TestImageInfoSpecific):
class TestQCow2(TestQemuImgInfo):
'''Testing a qcow2 version 2 image'''
img_options = 'compat=0.10'
- json_compare = { 'compat': '0.10', 'refcount-bits': 16 }
- human_compare = [ 'compat: 0.10', 'refcount bits: 16' ]
+ json_compare = { 'compat': '0.10', 'refcount-bits': 16,
+ 'compression-type': 'zlib' }
+ human_compare = [ 'compat: 0.10', 'compression type: zlib',
+ 'refcount bits: 16' ]
class TestQCow3NotLazy(TestQemuImgInfo):
'''Testing a qcow2 version 3 image with lazy refcounts disabled'''
img_options = 'compat=1.1,lazy_refcounts=off'
json_compare = { 'compat': '1.1', 'lazy-refcounts': False,
- 'refcount-bits': 16, 'corrupt': False }
- human_compare = [ 'compat: 1.1', 'lazy refcounts: false',
- 'refcount bits: 16', 'corrupt: false' ]
+ 'refcount-bits': 16, 'corrupt': False,
+ 'compression-type': 'zlib' }
+ human_compare = [ 'compat: 1.1', 'compression type: zlib',
+ 'lazy refcounts: false', 'refcount bits: 16',
+ 'corrupt: false' ]
class TestQCow3Lazy(TestQemuImgInfo):
'''Testing a qcow2 version 3 image with lazy refcounts enabled'''
img_options = 'compat=1.1,lazy_refcounts=on'
json_compare = { 'compat': '1.1', 'lazy-refcounts': True,
- 'refcount-bits': 16, 'corrupt': False }
- human_compare = [ 'compat: 1.1', 'lazy refcounts: true',
- 'refcount bits: 16', 'corrupt: false' ]
+ 'refcount-bits': 16, 'corrupt': False,
+ 'compression-type': 'zlib' }
+ human_compare = [ 'compat: 1.1', 'compression type: zlib',
+ 'lazy refcounts: true', 'refcount bits: 16',
+ 'corrupt: false' ]
class TestQCow3NotLazyQMP(TestQMP):
'''Testing a qcow2 version 3 image with lazy refcounts disabled, opening
@@ -113,7 +119,8 @@ class TestQCow3NotLazyQMP(TestQMP):
img_options = 'compat=1.1,lazy_refcounts=off'
qemu_options = 'lazy-refcounts=on'
compare = { 'compat': '1.1', 'lazy-refcounts': False,
- 'refcount-bits': 16, 'corrupt': False }
+ 'refcount-bits': 16, 'corrupt': False,
+ 'compression-type': 'zlib' }
class TestQCow3LazyQMP(TestQMP):
@@ -122,7 +129,8 @@ class TestQCow3LazyQMP(TestQMP):
img_options = 'compat=1.1,lazy_refcounts=on'
qemu_options = 'lazy-refcounts=off'
compare = { 'compat': '1.1', 'lazy-refcounts': True,
- 'refcount-bits': 16, 'corrupt': False }
+ 'refcount-bits': 16, 'corrupt': False,
+ 'compression-type': 'zlib' }
TestImageInfoSpecific = None
TestQemuImgInfo = None
diff --git a/tests/qemu-iotests/080 b/tests/qemu-iotests/080
index a3d13c414e..7588c63b6c 100755
--- a/tests/qemu-iotests/080
+++ b/tests/qemu-iotests/080
@@ -45,7 +45,7 @@ _supported_os Linux
# - This is generally a test for compat=1.1 images
_unsupported_imgopts 'refcount_bits=1[^0-9]' data_file 'compat=0.10'
-header_size=104
+header_size=112
offset_backing_file_offset=8
offset_backing_file_size=16
diff --git a/tests/qemu-iotests/144.out b/tests/qemu-iotests/144.out
index c7aa2e4820..885a8874a5 100644
--- a/tests/qemu-iotests/144.out
+++ b/tests/qemu-iotests/144.out
@@ -9,7 +9,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=536870912
{ 'execute': 'qmp_capabilities' }
{"return": {}}
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp.IMGFMT', 'format': 'IMGFMT' } }
-Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
{"return": {}}
=== Performing block-commit on active layer ===
@@ -31,6 +31,6 @@ Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/
=== Performing Live Snapshot 2 ===
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp2.IMGFMT', 'format': 'IMGFMT' } }
-Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
{"return": {}}
*** done
diff --git a/tests/qemu-iotests/182.out b/tests/qemu-iotests/182.out
index a8eea166c3..ae43654d32 100644
--- a/tests/qemu-iotests/182.out
+++ b/tests/qemu-iotests/182.out
@@ -13,7 +13,7 @@ Is another process using the image [TEST_DIR/t.qcow2]?
{'execute': 'blockdev-add', 'arguments': { 'node-name': 'node0', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } }
{"return": {}}
{'execute': 'blockdev-snapshot-sync', 'arguments': { 'node-name': 'node0', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'snapshot-node-name': 'node1' } }
-Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
{"return": {}}
{'execute': 'blockdev-add', 'arguments': { 'node-name': 'node1', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } }
{"return": {}}
diff --git a/tests/qemu-iotests/242.out b/tests/qemu-iotests/242.out
index 7ac8404d11..091b9126ce 100644
--- a/tests/qemu-iotests/242.out
+++ b/tests/qemu-iotests/242.out
@@ -12,6 +12,7 @@ virtual size: 1 MiB (1048576 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
refcount bits: 16
corrupt: false
@@ -32,6 +33,7 @@ virtual size: 1 MiB (1048576 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
bitmaps:
[0]:
@@ -64,6 +66,7 @@ virtual size: 1 MiB (1048576 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
bitmaps:
[0]:
@@ -104,6 +107,7 @@ virtual size: 1 MiB (1048576 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
bitmaps:
[0]:
@@ -153,6 +157,7 @@ virtual size: 1 MiB (1048576 bytes)
cluster_size: 65536
Format specific information:
compat: 1.1
+ compression type: zlib
lazy refcounts: false
bitmaps:
[0]:
diff --git a/tests/qemu-iotests/255.out b/tests/qemu-iotests/255.out
index 348909fdef..a3c99fd62e 100644
--- a/tests/qemu-iotests/255.out
+++ b/tests/qemu-iotests/255.out
@@ -3,9 +3,9 @@ Finishing a commit job with background reads
=== Create backing chain and start VM ===
-Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
-Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
=== Start background read requests ===
@@ -23,9 +23,9 @@ Closing the VM while a job is being cancelled
=== Create images and start VM ===
-Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
-Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib
wrote 1048576/1048576 bytes at offset 0
1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 3f8ee3e5f7..279e0bbb0d 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -152,7 +152,8 @@ _filter_img_create()
-e "s# refcount_bits=[0-9]\\+##g" \
-e "s# key-secret=[a-zA-Z0-9]\\+##g" \
-e "s# iter-time=[0-9]\\+##g" \
- -e "s# force_size=\\(on\\|off\\)##g"
+ -e "s# force_size=\\(on\\|off\\)##g" \
+ -e "s# compression_type=[a-zA-Z0-9]\\+##g"
}
_filter_img_info()
--
2.17.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v9 2/4] qcow2: rework the cluster compression routine
2020-03-23 14:25 [PATCH v9 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
@ 2020-03-23 14:25 ` Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 3/4] qcow2: add zstd cluster compression Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov
3 siblings, 0 replies; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-23 14:25 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
The patch enables processing the image compression type defined
for the image and chooses an appropriate method for image clusters
(de)compression.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
block/qcow2-threads.c | 71 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 60 insertions(+), 11 deletions(-)
diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c
index a68126f291..7dbaf53489 100644
--- a/block/qcow2-threads.c
+++ b/block/qcow2-threads.c
@@ -74,7 +74,9 @@ typedef struct Qcow2CompressData {
} Qcow2CompressData;
/*
- * qcow2_compress()
+ * qcow2_zlib_compress()
+ *
+ * Compress @src_size bytes of data using zlib compression method
*
* @dest - destination buffer, @dest_size bytes
* @src - source buffer, @src_size bytes
@@ -83,8 +85,8 @@ typedef struct Qcow2CompressData {
* -ENOMEM destination buffer is not enough to store compressed data
* -EIO on any other error
*/
-static ssize_t qcow2_compress(void *dest, size_t dest_size,
- const void *src, size_t src_size)
+static ssize_t qcow2_zlib_compress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
{
ssize_t ret;
z_stream strm;
@@ -119,10 +121,10 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,
}
/*
- * qcow2_decompress()
+ * qcow2_zlib_decompress()
*
* Decompress some data (not more than @src_size bytes) to produce exactly
- * @dest_size bytes.
+ * @dest_size bytes using zlib compression method
*
* @dest - destination buffer, @dest_size bytes
* @src - source buffer, @src_size bytes
@@ -130,8 +132,8 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,
* Returns: 0 on success
* -EIO on fail
*/
-static ssize_t qcow2_decompress(void *dest, size_t dest_size,
- const void *src, size_t src_size)
+static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
{
int ret;
z_stream strm;
@@ -191,20 +193,67 @@ qcow2_co_do_compress(BlockDriverState *bs, void *dest, size_t dest_size,
return arg.ret;
}
+/*
+ * qcow2_co_compress()
+ *
+ * Compress @src_size bytes of data using the compression
+ * method defined by the image compression type
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: compressed size on success
+ * a negative error code on failure
+ */
ssize_t coroutine_fn
qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
const void *src, size_t src_size)
{
- return qcow2_co_do_compress(bs, dest, dest_size, src, src_size,
- qcow2_compress);
+ BDRVQcow2State *s = bs->opaque;
+ Qcow2CompressFunc fn;
+
+ switch (s->compression_type) {
+ case QCOW2_COMPRESSION_TYPE_ZLIB:
+ fn = qcow2_zlib_compress;
+ break;
+
+ default:
+ abort();
+ }
+
+ return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn);
}
+/*
+ * qcow2_co_decompress()
+ *
+ * Decompress some data (not more than @src_size bytes) to produce exactly
+ * @dest_size bytes using the compression method defined by the image
+ * compression type
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: 0 on success
+ * a negative error code on failure
+ */
ssize_t coroutine_fn
qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size,
const void *src, size_t src_size)
{
- return qcow2_co_do_compress(bs, dest, dest_size, src, src_size,
- qcow2_decompress);
+ BDRVQcow2State *s = bs->opaque;
+ Qcow2CompressFunc fn;
+
+ switch (s->compression_type) {
+ case QCOW2_COMPRESSION_TYPE_ZLIB:
+ fn = qcow2_zlib_decompress;
+ break;
+
+ default:
+ abort();
+ }
+
+ return qcow2_co_do_compress(bs, dest, dest_size, src, src_size, fn);
}
--
2.17.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v9 3/4] qcow2: add zstd cluster compression
2020-03-23 14:25 [PATCH v9 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 2/4] qcow2: rework the cluster compression routine Denis Plotnikov
@ 2020-03-23 14:25 ` Denis Plotnikov
2020-03-27 8:43 ` Vladimir Sementsov-Ogievskiy
2020-03-23 14:25 ` [PATCH v9 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov
3 siblings, 1 reply; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-23 14:25 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
---
docs/interop/qcow2.txt | 1 +
configure | 2 +-
qapi/block-core.json | 3 +-
block/qcow2-threads.c | 134 +++++++++++++++++++++++++++++++++++++++++
block/qcow2.c | 7 +++
5 files changed, 145 insertions(+), 2 deletions(-)
diff --git a/docs/interop/qcow2.txt b/docs/interop/qcow2.txt
index 5597e24474..795dbb21dd 100644
--- a/docs/interop/qcow2.txt
+++ b/docs/interop/qcow2.txt
@@ -208,6 +208,7 @@ version 2.
Available compression type values:
0: zlib <https://www.zlib.net/>
+ 1: zstd <http://github.com/facebook/zstd>
=== Header padding ===
diff --git a/configure b/configure
index caa65f5883..b2a0aa241a 100755
--- a/configure
+++ b/configure
@@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is enabled if available:
lzfse support of lzfse compression library
(for reading lzfse-compressed dmg images)
zstd support for zstd compression library
- (for migration compression)
+ (for migration compression and qcow2 cluster compression)
seccomp seccomp support
coroutine-pool coroutine freelist (better performance)
glusterfs GlusterFS backend
diff --git a/qapi/block-core.json b/qapi/block-core.json
index a306484973..8953451818 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -4401,11 +4401,12 @@
# Compression type used in qcow2 image file
#
# @zlib: zlib compression, see <http://zlib.net/>
+# @zstd: zstd compression, see <http://github.com/facebook/zstd>
#
# Since: 5.0
##
{ 'enum': 'Qcow2CompressionType',
- 'data': [ 'zlib' ] }
+ 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] }
##
# @BlockdevCreateOptionsQcow2:
diff --git a/block/qcow2-threads.c b/block/qcow2-threads.c
index 7dbaf53489..f321d4e1a7 100644
--- a/block/qcow2-threads.c
+++ b/block/qcow2-threads.c
@@ -28,6 +28,11 @@
#define ZLIB_CONST
#include <zlib.h>
+#ifdef CONFIG_ZSTD
+#include <zstd.h>
+#include <zstd_errors.h>
+#endif
+
#include "qcow2.h"
#include "block/thread-pool.h"
#include "crypto.h"
@@ -166,6 +171,125 @@ static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size,
return ret;
}
+#ifdef CONFIG_ZSTD
+
+/*
+ * qcow2_zstd_compress()
+ *
+ * Compress @src_size bytes of data using zstd compression method
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: compressed size on success
+ * -ENOMEM destination buffer is not enough to store compressed data
+ * -EIO on any other error
+ */
+static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
+{
+ size_t ret;
+ ZSTD_outBuffer output = { dest, dest_size, 0 };
+ ZSTD_inBuffer input = { src, src_size, 0 };
+ ZSTD_CCtx *cctx = ZSTD_createCCtx();
+
+ if (!cctx) {
+ return -EIO;
+ }
+ /*
+ * ZSTD spec: "You must continue calling ZSTD_compressStream2()
+ * with ZSTD_e_end until it returns 0, at which point you are
+ * free to start a new frame"
+ */
+ {
+ /*
+ * zstd simple interface requires the exact compressed size.
+ * zstd stream interface reads the comressed size from
+ * the compressed stream frame.
+ * Instruct zstd to compress the whole buffer and write
+ * the frame which includes the compressed size.
+ * This allows as to use zstd streaming semantics and
+ * don't store the compressed size for the zstd decompression.
+ */
+ ret = ZSTD_compressStream2(cctx, &output, &input, ZSTD_e_end);
+ if (ZSTD_isError(ret)) {
+ ret = -EIO;
+ goto out;
+ }
+ /* Dest buffer isn't big enough to store compressed content */
+ if (output.pos + ret > output.size) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ } while (ret);
+
+ /* if no error, the input data must be fully consumed */
+ assert(input.pos == input.size);
+ /* make sure we can safely return compressed buffer size with ssize_t */
+ assert(output.pos <= SSIZE_MAX);
+ ret = output.pos;
+
+out:
+ ZSTD_freeCCtx(cctx);
+ return ret;
+}
+
+/*
+ * qcow2_zstd_decompress()
+ *
+ * Decompress some data (not more than @src_size bytes) to produce exactly
+ * @dest_size bytes using zstd compression method
+ *
+ * @dest - destination buffer, @dest_size bytes
+ * @src - source buffer, @src_size bytes
+ *
+ * Returns: 0 on success
+ * -EIO on any error
+ */
+static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size,
+ const void *src, size_t src_size)
+{
+ size_t ret = 0;
+ ZSTD_outBuffer output = { dest, dest_size, 0 };
+ ZSTD_inBuffer input = { src, src_size, 0 };
+ ZSTD_DCtx *dctx = ZSTD_createDCtx();
+
+ if (!dctx) {
+ return -EIO;
+ }
+
+ {
+ ret = ZSTD_decompressStream(dctx, &output, &input);
+ if (ZSTD_isError(ret)) {
+ ret = -EIO;
+ goto out;
+ }
+ /*
+ * Dest buffer size is the image cluster size.
+ * It should be big enough to store uncompressed content.
+ * There shouldn't be any cases when the decompressed content
+ * size is greater then the cluster size.
+ */
+ if (output.pos + ret > output.size) {
+ ret = -EIO;
+ goto out;
+ }
+ } while (ret);
+
+ /*
+ * If decompression went fine we must have the compressed
+ * cluster fully consumed and flushed
+ */
+ if (output.pos != output.size) {
+ ret = -EIO;
+ }
+out:
+ ZSTD_freeDCtx(dctx);
+ return ret;
+
+}
+#endif
+
static int qcow2_compress_pool_func(void *opaque)
{
Qcow2CompressData *data = opaque;
@@ -217,6 +341,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
fn = qcow2_zlib_compress;
break;
+#ifdef CONFIG_ZSTD
+ case QCOW2_COMPRESSION_TYPE_ZSTD:
+ fn = qcow2_zstd_compress;
+ break;
+#endif
default:
abort();
}
@@ -249,6 +378,11 @@ qcow2_co_decompress(BlockDriverState *bs, void *dest, size_t dest_size,
fn = qcow2_zlib_decompress;
break;
+#ifdef CONFIG_ZSTD
+ case QCOW2_COMPRESSION_TYPE_ZSTD:
+ fn = qcow2_zstd_decompress;
+ break;
+#endif
default:
abort();
}
diff --git a/block/qcow2.c b/block/qcow2.c
index eb30cfe811..de8e3f976d 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp)
{
switch (s->compression_type) {
case QCOW2_COMPRESSION_TYPE_ZLIB:
+#ifdef CONFIG_ZSTD
+ case QCOW2_COMPRESSION_TYPE_ZSTD:
+#endif
break;
default:
@@ -3454,6 +3457,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp)
}
switch (qcow2_opts->compression_type) {
+#ifdef CONFIG_ZSTD
+ case QCOW2_COMPRESSION_TYPE_ZSTD:
+ break;
+#endif
default:
error_setg(errp, "Unknown compression type");
goto out;
--
2.17.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v9 4/4] iotests: 287: add qcow2 compression type test
2020-03-23 14:25 [PATCH v9 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
` (2 preceding siblings ...)
2020-03-23 14:25 ` [PATCH v9 3/4] qcow2: add zstd cluster compression Denis Plotnikov
@ 2020-03-23 14:25 ` Denis Plotnikov
3 siblings, 0 replies; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-23 14:25 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, vsementsov, berto, qemu-block, armbru, mreitz, den
The test checks fulfilling qcow2 requiriements for the compression
type feature and zstd compression type operability.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
tests/qemu-iotests/287 | 128 +++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/287.out | 43 +++++++++++++
tests/qemu-iotests/group | 1 +
3 files changed, 172 insertions(+)
create mode 100755 tests/qemu-iotests/287
create mode 100644 tests/qemu-iotests/287.out
diff --git a/tests/qemu-iotests/287 b/tests/qemu-iotests/287
new file mode 100755
index 0000000000..49d15b3d43
--- /dev/null
+++ b/tests/qemu-iotests/287
@@ -0,0 +1,128 @@
+#!/usr/bin/env bash
+#
+# Test case for an image using zstd compression
+#
+# Copyright (c) 2020 Virtuozzo International GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
+owner=dplotnikov@virtuozzo.com
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# standard environment
+. ./common.rc
+. ./common.filter
+
+# This tests qocw2-specific low-level functionality
+_supported_fmt qcow2
+_supported_proto file
+_supported_os Linux
+
+# for all the cases
+CLUSTER_SIZE=65536
+
+# Check if we can run this test.
+
+IMGOPTS='compression_type=zstd' _make_test_img 64M | grep "Invalid parameter 'zstd'" 2>&1 1>/dev/null
+
+ZSTD_SUPPORTED=$?
+
+if (($ZSTD_SUPPORTED==0)); then
+ _notrun "ZSTD is disabled"
+fi
+
+# Test: when compression is zlib the incompatible bit is unset
+echo
+echo "=== Testing compression type incompatible bit setting for zlib ==="
+echo
+
+IMGOPTS='compression_type=zlib' _make_test_img 64M
+$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features
+
+# Test: when compression differs from zlib the incompatible bit is set
+echo
+echo "=== Testing compression type incompatible bit setting for zstd ==="
+echo
+
+IMGOPTS='compression_type=zstd' _make_test_img 64M
+$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features
+
+# Test: an image can't be openned if compression type is zlib and
+# incompatible feature compression type is set
+echo
+echo "=== Testing zlib with incompatible bit set ==="
+echo
+
+IMGOPTS='compression_type=zlib' _make_test_img 64M
+$PYTHON qcow2.py "$TEST_IMG" set-feature-bit incompatible 3
+# to make sure the bit was actually set
+$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features
+$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null
+if (($?==0)); then
+ echo "Error: The image openned successfully. The image must not be openned"
+fi
+
+# Test: an image can't be openned if compression type is NOT zlib and
+# incompatible feature compression type is UNSET
+echo
+echo "=== Testing zstd with incompatible bit unset ==="
+echo
+
+IMGOPTS='compression_type=zstd' _make_test_img 64M
+$PYTHON qcow2.py "$TEST_IMG" set-header incompatible_features 0
+# to make sure the bit was actually unset
+$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features
+$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null
+if (($?==0)); then
+ echo "Error: The image openned successfully. The image must not be openned"
+fi
+# Test: check compression type values
+echo
+echo "=== Testing compression type values ==="
+echo
+# zlib=0
+IMGOPTS='compression_type=zlib' _make_test_img 64M
+od -j104 -N1 -An -vtu1 "$TEST_IMG"
+
+# zstd=1
+IMGOPTS='compression_type=zstd' _make_test_img 64M
+od -j104 -N1 -An -vtu1 "$TEST_IMG"
+
+# Test: using zstd compression, write to and read from an image
+echo
+echo "=== Testing reading and writing with zstd ==="
+echo
+
+IMGOPTS='compression_type=zstd' _make_test_img 64M
+$QEMU_IO -c "write -c -P 0xAC 65536 64k " "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -P 0xAC 65536 65536 " "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -v 131070 8 " "$TEST_IMG" | _filter_qemu_io
+$QEMU_IO -c "read -v 65534 8" "$TEST_IMG" | _filter_qemu_io
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/287.out b/tests/qemu-iotests/287.out
new file mode 100644
index 0000000000..8e51c3078d
--- /dev/null
+++ b/tests/qemu-iotests/287.out
@@ -0,0 +1,43 @@
+QA output created by 287
+
+=== Testing compression type incompatible bit setting for zlib ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+incompatible_features []
+
+=== Testing compression type incompatible bit setting for zstd ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+incompatible_features [3]
+
+=== Testing zlib with incompatible bit set ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+incompatible_features [3]
+
+=== Testing zstd with incompatible bit unset ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+incompatible_features []
+
+=== Testing compression type values ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+ 0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+ 1
+
+=== Testing reading and writing with zstd ===
+
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
+wrote 65536/65536 bytes at offset 65536
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 65536/65536 bytes at offset 65536
+64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+0001fffe: ac ac 00 00 00 00 00 00 ........
+read 8/8 bytes at offset 131070
+8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+0000fffe: 00 00 ac ac ac ac ac ac ........
+read 8/8 bytes at offset 65534
+8 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 0317667695..5edbadef40 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -293,3 +293,4 @@
283 auto quick
284 rw
286 rw quick
+287 auto quick
--
2.17.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v9 1/4] qcow2: introduce compression type feature
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
@ 2020-03-23 15:59 ` Vladimir Sementsov-Ogievskiy
2020-03-30 15:06 ` Markus Armbruster
1 sibling, 0 replies; 11+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2020-03-23 15:59 UTC (permalink / raw)
To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den
23.03.2020 17:25, Denis Plotnikov wrote:
> The patch adds some preparation parts for incompatible compression type
> feature to qcow2 allowing the use different compression methods for
> image clusters (de)compressing.
>
> It is implied that the compression type is set on the image creation and
> can be changed only later by image conversion, thus compression type
> defines the only compression algorithm used for the image, and thus,
> for all image clusters.
>
> The goal of the feature is to add support of other compression methods
> to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
>
> The default compression is ZLIB. Images created with ZLIB compression type
> are backward compatible with older qemu versions.
>
> Adding of the compression type breaks a number of tests because now the
> compression type is reported on image creation and there are some changes
> in the qcow2 header in size and offsets.
>
> The tests are fixed in the following ways:
> * filter out compression_type for many tests
> * fix header size, feature table size and backing file offset
> affected tests: 031, 036, 061, 080
> header_size +=8: 1 byte compression type
> 7 bytes padding
> feature_table += 48: incompatible feature compression type
> backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
> * add "compression type" for test output matching when it isn't filtered
> affected tests: 049, 060, 061, 065, 144, 182, 242, 255
>
> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
> ---
> qapi/block-core.json | 22 +++++-
> block/qcow2.h | 20 +++++-
> include/block/block_int.h | 1 +
> block/qcow2.c | 113 +++++++++++++++++++++++++++++++
> tests/qemu-iotests/031.out | 14 ++--
> tests/qemu-iotests/036.out | 4 +-
> tests/qemu-iotests/049.out | 102 ++++++++++++++--------------
> tests/qemu-iotests/060.out | 1 +
> tests/qemu-iotests/061.out | 34 ++++++----
> tests/qemu-iotests/065 | 28 +++++---
> tests/qemu-iotests/080 | 2 +-
> tests/qemu-iotests/144.out | 4 +-
> tests/qemu-iotests/182.out | 2 +-
> tests/qemu-iotests/242.out | 5 ++
> tests/qemu-iotests/255.out | 8 +--
> tests/qemu-iotests/common.filter | 3 +-
> 16 files changed, 267 insertions(+), 96 deletions(-)
>
[..]
> --- a/block/qcow2.h
> +++ b/block/qcow2.h
> @@ -146,8 +146,16 @@ typedef struct QCowHeader {
>
> uint32_t refcount_order;
> uint32_t header_length;
> +
> + /* Additional fields */
> + uint8_t compression_type;
> +
> + /* header must be a multiple of 8 */
> + uint8_t padding[7];
> } QEMU_PACKED QCowHeader;
>
> +QEMU_BUILD_BUG_ON(sizeof(QCowHeader) % 8 != 0);
Better write
QEMU_BUILD_BUG_ON(QEMU_IS_ALIGNED(sizeof(QCowHeader), 8);
with or without this:
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> +
> typedef struct QEMU_PACKED QCowSnapshotHeader {
> /* header is 8 byte aligned */
> uint64_t l1_table_offset;
> @@ -216,13 +224,16 @@ enum {
> QCOW2_INCOMPAT_DIRTY_BITNR = 0,
> QCOW2_INCOMPAT_CORRUPT_BITNR = 1,
> QCOW2_INCOMPAT_DATA_FILE_BITNR = 2,
> + QCOW2_INCOMPAT_COMPRESSION_BITNR = 3,
> QCOW2_INCOMPAT_DIRTY = 1 << QCOW2_INCOMPAT_DIRTY_BITNR,
> QCOW2_INCOMPAT_CORRUPT = 1 << QCOW2_INCOMPAT_CORRUPT_BITNR,
> QCOW2_INCOMPAT_DATA_FILE = 1 << QCOW2_INCOMPAT_DATA_FILE_BITNR,
> + QCOW2_INCOMPAT_COMPRESSION = 1 << QCOW2_INCOMPAT_COMPRESSION_BITNR,
>
> QCOW2_INCOMPAT_MASK = QCOW2_INCOMPAT_DIRTY
> | QCOW2_INCOMPAT_CORRUPT
> - | QCOW2_INCOMPAT_DATA_FILE,
> + | QCOW2_INCOMPAT_DATA_FILE
> + | QCOW2_INCOMPAT_COMPRESSION,
> };
>
> /* Compatible feature bits */
> @@ -369,6 +380,13 @@ typedef struct BDRVQcow2State {
>
> bool metadata_preallocation_checked;
> bool metadata_preallocation;
> + /*
> + * Compression type used for the image. Default: 0 - ZLIB
> + * The image compression type is set on image creation.
> + * For now, the only way to change the compression type
> + * is to convert the image with the desired compression type set.
> + */
> + Qcow2CompressionType compression_type;
> } BDRVQcow2State;
>
> typedef struct Qcow2COWRegion {
[..]
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v9 3/4] qcow2: add zstd cluster compression
2020-03-23 14:25 ` [PATCH v9 3/4] qcow2: add zstd cluster compression Denis Plotnikov
@ 2020-03-27 8:43 ` Vladimir Sementsov-Ogievskiy
2020-03-27 9:40 ` Denis Plotnikov
0 siblings, 1 reply; 11+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2020-03-27 8:43 UTC (permalink / raw)
To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den
Should we note somehow in qcow2 spec that we use streamed version of zstd with specific end byte?
23.03.2020 17:25, Denis Plotnikov wrote:
> zstd significantly reduces cluster compression time.
> It provides better compression performance maintaining
> the same level of the compression ratio in comparison with
> zlib, which, at the moment, is the only compression
> method available.
>
> The performance test results:
> Test compresses and decompresses qemu qcow2 image with just
> installed rhel-7.6 guest.
> Image cluster size: 64K. Image on disk size: 2.2G
>
> The test was conducted with brd disk to reduce the influence
> of disk subsystem to the test results.
> The results is given in seconds.
>
> compress cmd:
> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
> src.img [zlib|zstd]_compressed.img
> decompress cmd
> time ./qemu-img convert -O qcow2
> [zlib|zstd]_compressed.img uncompressed.img
>
> compression decompression
> zlib zstd zlib zstd
> ------------------------------------------------------------
> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
> user 65.0 15.8 5.3 2.5
> sys 3.3 0.2 2.0 2.0
>
> Both ZLIB and ZSTD gave the same compression ratio: 1.57
> compressed image size in both cases: 1.4G
>
> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
> QAPI part:
> Acked-by: Markus Armbruster <armbru@redhat.com>
> ---
[..]
> +
> +/*
> + * qcow2_zstd_compress()
> + *
> + * Compress @src_size bytes of data using zstd compression method
> + *
> + * @dest - destination buffer, @dest_size bytes
> + * @src - source buffer, @src_size bytes
> + *
> + * Returns: compressed size on success
> + * -ENOMEM destination buffer is not enough to store compressed data
> + * -EIO on any other error
> + */
> +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size,
> + const void *src, size_t src_size)
> +{
> + size_t ret;
> + ZSTD_outBuffer output = { dest, dest_size, 0 };
> + ZSTD_inBuffer input = { src, src_size, 0 };
> + ZSTD_CCtx *cctx = ZSTD_createCCtx();
> +
> + if (!cctx) {
> + return -EIO;
> + }
> + /*
> + * ZSTD spec: "You must continue calling ZSTD_compressStream2()
> + * with ZSTD_e_end until it returns 0, at which point you are
> + * free to start a new frame"
> + */
> + {
> + /*
> + * zstd simple interface requires the exact compressed size.
> + * zstd stream interface reads the comressed size from
> + * the compressed stream frame.
> + * Instruct zstd to compress the whole buffer and write
> + * the frame which includes the compressed size.
> + * This allows as to use zstd streaming semantics and
> + * don't store the compressed size for the zstd decompression.
> + */
> + ret = ZSTD_compressStream2(cctx, &output, &input, ZSTD_e_end);
> + if (ZSTD_isError(ret)) {
> + ret = -EIO;
> + goto out;
> + }
> + /* Dest buffer isn't big enough to store compressed content */
> + if (output.pos + ret > output.size) {
> + ret = -ENOMEM;
> + goto out;
> + }
> + } while (ret);
> +
> + /* if no error, the input data must be fully consumed */
> + assert(input.pos == input.size);
> + /* make sure we can safely return compressed buffer size with ssize_t *//z
> + assert(output.pos <= SSIZE_MAX);
> + ret = output.pos;
> +
> +out:
> + ZSTD_freeCCtx(cctx);
> + return ret;
> +}
> +
> +/*
> + * qcow2_zstd_decompress()
> + *
> + * Decompress some data (not more than @src_size bytes) to produce exactly
> + * @dest_size bytes using zstd compression method
> + *
> + * @dest - destination buffer, @dest_size bytes
> + * @src - source buffer, @src_size bytes
> + *
> + * Returns: 0 on success
> + * -EIO on any error
> + */
> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size,
> + const void *src, size_t src_size)
> +{
> + size_t ret = 0;
> + ZSTD_outBuffer output = { dest, dest_size, 0 };
> + ZSTD_inBuffer input = { src, src_size, 0 };
> + ZSTD_DCtx *dctx = ZSTD_createDCtx();
> +
> + if (!dctx) {
> + return -EIO;
> + }
> +
> + {
> + ret = ZSTD_decompressStream(dctx, &output, &input);
> + if (ZSTD_isError(ret)) {
> + ret = -EIO;
> + goto out;
> + }
> + /*
> + * Dest buffer size is the image cluster size.
> + * It should be big enough to store uncompressed content.
> + * There shouldn't be any cases when the decompressed content
> + * size is greater then the cluster size.
> + */
> + if (output.pos + ret > output.size) {
> + ret = -EIO;
> + goto out;
> + }
> + } while (ret);
Hmm. Unfortunately, zstd spec is not enough verbose to understand how to use
these functions :).
But I found this in comment in https://github.com/facebook/zstd/blob/dev/examples/streaming_decompression.c :
/* The return code is zero if the frame is complete, but there may
* be multiple frames concatenated together.
so, I think it would be safer to move to "while (input.pos < input.size)" loop like in example.
and drop next assertion. And possibly do same for compression to be consistent (and safer?).
> +
> + /*
> + * If decompression went fine we must have the compressed
> + * cluster fully consumed and flushed
> + */
> + if (output.pos != output.size) {
> + ret = -EIO;
> + }
> +out:
> + ZSTD_freeDCtx(dctx);
> + return ret;
> +
> +}
> +#endif
> +
> static int qcow2_compress_pool_func(void *opaque)
> {
> Qcow2CompressData *data = opaque;
> @@ -217,6 +341,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
[..]
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v9 3/4] qcow2: add zstd cluster compression
2020-03-27 8:43 ` Vladimir Sementsov-Ogievskiy
@ 2020-03-27 9:40 ` Denis Plotnikov
2020-03-27 11:40 ` Vladimir Sementsov-Ogievskiy
0 siblings, 1 reply; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-27 9:40 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel
Cc: kwolf, berto, qemu-block, armbru, mreitz, den
On 27.03.2020 11:43, Vladimir Sementsov-Ogievskiy wrote:
> Should we note somehow in qcow2 spec that we use streamed version of
> zstd with specific end byte?
We didn't do it for zlib. zstd does it the same way as zlib, saves the
compression output to some buffer.
>
> 23.03.2020 17:25, Denis Plotnikov wrote:
>> zstd significantly reduces cluster compression time.
>> It provides better compression performance maintaining
>> the same level of the compression ratio in comparison with
>> zlib, which, at the moment, is the only compression
>> method available.
>>
>> The performance test results:
>> Test compresses and decompresses qemu qcow2 image with just
>> installed rhel-7.6 guest.
>> Image cluster size: 64K. Image on disk size: 2.2G
>>
>> The test was conducted with brd disk to reduce the influence
>> of disk subsystem to the test results.
>> The results is given in seconds.
>>
>> compress cmd:
>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
>> src.img [zlib|zstd]_compressed.img
>> decompress cmd
>> time ./qemu-img convert -O qcow2
>> [zlib|zstd]_compressed.img uncompressed.img
>>
>> compression decompression
>> zlib zstd zlib zstd
>> ------------------------------------------------------------
>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
>> user 65.0 15.8 5.3 2.5
>> sys 3.3 0.2 2.0 2.0
>>
>> Both ZLIB and ZSTD gave the same compression ratio: 1.57
>> compressed image size in both cases: 1.4G
>>
>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
>> QAPI part:
>> Acked-by: Markus Armbruster <armbru@redhat.com>
>> ---
>
> [..]
>
>> +
>> +/*
>> + * qcow2_zstd_compress()
>> + *
>> + * Compress @src_size bytes of data using zstd compression method
>> + *
>> + * @dest - destination buffer, @dest_size bytes
>> + * @src - source buffer, @src_size bytes
>> + *
>> + * Returns: compressed size on success
>> + * -ENOMEM destination buffer is not enough to store
>> compressed data
>> + * -EIO on any other error
>> + */
>> +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size,
>> + const void *src, size_t src_size)
>> +{
>> + size_t ret;
>> + ZSTD_outBuffer output = { dest, dest_size, 0 };
>> + ZSTD_inBuffer input = { src, src_size, 0 };
>> + ZSTD_CCtx *cctx = ZSTD_createCCtx();
>> +
>> + if (!cctx) {
>> + return -EIO;
>> + }
>> + /*
>> + * ZSTD spec: "You must continue calling ZSTD_compressStream2()
>> + * with ZSTD_e_end until it returns 0, at which point you are
>> + * free to start a new frame"
>> + */
>> + {
>> + /*
>> + * zstd simple interface requires the exact compressed size.
>> + * zstd stream interface reads the comressed size from
>> + * the compressed stream frame.
>> + * Instruct zstd to compress the whole buffer and write
>> + * the frame which includes the compressed size.
>> + * This allows as to use zstd streaming semantics and
>> + * don't store the compressed size for the zstd decompression.
>> + */
>> + ret = ZSTD_compressStream2(cctx, &output, &input, ZSTD_e_end);
>> + if (ZSTD_isError(ret)) {
>> + ret = -EIO;
>> + goto out;
>> + }
>> + /* Dest buffer isn't big enough to store compressed content */
>> + if (output.pos + ret > output.size) {
>> + ret = -ENOMEM;
>> + goto out;
>> + }
>> + } while (ret);
>> +
>> + /* if no error, the input data must be fully consumed */
>> + assert(input.pos == input.size);
>> + /* make sure we can safely return compressed buffer size with
>> ssize_t *//z
>> + assert(output.pos <= SSIZE_MAX);
>> + ret = output.pos;
>> +
>> +out:
>> + ZSTD_freeCCtx(cctx);
>> + return ret;
>> +}
>> +
>> +/*
>> + * qcow2_zstd_decompress()
>> + *
>> + * Decompress some data (not more than @src_size bytes) to produce
>> exactly
>> + * @dest_size bytes using zstd compression method
>> + *
>> + * @dest - destination buffer, @dest_size bytes
>> + * @src - source buffer, @src_size bytes
>> + *
>> + * Returns: 0 on success
>> + * -EIO on any error
>> + */
>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size,
>> + const void *src, size_t src_size)
>> +{
>> + size_t ret = 0;
>> + ZSTD_outBuffer output = { dest, dest_size, 0 };
>> + ZSTD_inBuffer input = { src, src_size, 0 };
>> + ZSTD_DCtx *dctx = ZSTD_createDCtx();
>> +
>> + if (!dctx) {
>> + return -EIO;
>> + }
>> +
>> + {
>> + ret = ZSTD_decompressStream(dctx, &output, &input);
>> + if (ZSTD_isError(ret)) {
>> + ret = -EIO;
>> + goto out;
>> + }
>> + /*
>> + * Dest buffer size is the image cluster size.
>> + * It should be big enough to store uncompressed content.
>> + * There shouldn't be any cases when the decompressed content
>> + * size is greater then the cluster size.
>> + */
>> + if (output.pos + ret > output.size) {
>> + ret = -EIO;
>> + goto out;
>> + }
>> + } while (ret);
>
>
> Hmm. Unfortunately, zstd spec is not enough verbose to understand how
> to use
> these functions :).
>
> But I found this in comment in
> https://github.com/facebook/zstd/blob/dev/examples/streaming_decompression.c
> :
>
> /* The return code is zero if the frame is complete, but there may
> * be multiple frames concatenated together.
In our case, there should be the only frame as we stored it with
ZSTD_compressStream2(..., ZSTD_e_end)
If explicitly state in the spec, that "zstd compressed cluster must
contain the only zstd compressed frame"
On the other hand, we actually don't need such a restriction and we
should be able to decompress whatever is in the buffer (cluster)
if it's zstd stream.
>
> so, I think it would be safer to move to "while (input.pos <
> input.size)" loop like in example.
yes, I think It worth doing
>
> and drop next assertion. And possibly do same for compression to be
> consistent (and safer?).
>
>
>> +
>> + /*
>> + * If decompression went fine we must have the compressed
>> + * cluster fully consumed and flushed
>> + */
>> + if (output.pos != output.size) {
>> + ret = -EIO;
>> + }
>> +out:
>> + ZSTD_freeDCtx(dctx);
>> + return ret;
>> +
>> +}
>> +#endif
>> +
>> static int qcow2_compress_pool_func(void *opaque)
>> {
>> Qcow2CompressData *data = opaque;
>> @@ -217,6 +341,11 @@ qcow2_co_compress(BlockDriverState *bs, void
>> *dest, size_t dest_size,
>
>
> [..]
>
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v9 3/4] qcow2: add zstd cluster compression
2020-03-27 9:40 ` Denis Plotnikov
@ 2020-03-27 11:40 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 11+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2020-03-27 11:40 UTC (permalink / raw)
To: Denis Plotnikov, qemu-devel; +Cc: kwolf, berto, qemu-block, armbru, mreitz, den
27.03.2020 12:40, Denis Plotnikov wrote:
>
>
> On 27.03.2020 11:43, Vladimir Sementsov-Ogievskiy wrote:
>> Should we note somehow in qcow2 spec that we use streamed version of zstd with specific end byte?
> We didn't do it for zlib. zstd does it the same way as zlib, saves the compression output to some buffer.
Looked through zstd format spec, I don't thing that there are may be any principal difference between data
compressed by simple api or by streamed, so now I don't think that we need any additional comment.
>
>>
>> 23.03.2020 17:25, Denis Plotnikov wrote:
>>> zstd significantly reduces cluster compression time.
>>> It provides better compression performance maintaining
>>> the same level of the compression ratio in comparison with
>>> zlib, which, at the moment, is the only compression
>>> method available.
>>>
>>> The performance test results:
>>> Test compresses and decompresses qemu qcow2 image with just
>>> installed rhel-7.6 guest.
>>> Image cluster size: 64K. Image on disk size: 2.2G
>>>
>>> The test was conducted with brd disk to reduce the influence
>>> of disk subsystem to the test results.
>>> The results is given in seconds.
>>>
>>> compress cmd:
>>> time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
>>> src.img [zlib|zstd]_compressed.img
>>> decompress cmd
>>> time ./qemu-img convert -O qcow2
>>> [zlib|zstd]_compressed.img uncompressed.img
>>>
>>> compression decompression
>>> zlib zstd zlib zstd
>>> ------------------------------------------------------------
>>> real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
>>> user 65.0 15.8 5.3 2.5
>>> sys 3.3 0.2 2.0 2.0
>>>
>>> Both ZLIB and ZSTD gave the same compression ratio: 1.57
>>> compressed image size in both cases: 1.4G
>>>
>>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
>>> QAPI part:
>>> Acked-by: Markus Armbruster <armbru@redhat.com>
>>> ---
>>
>> [..]
>>
>>> +
>>> +/*
>>> + * qcow2_zstd_compress()
>>> + *
>>> + * Compress @src_size bytes of data using zstd compression method
>>> + *
>>> + * @dest - destination buffer, @dest_size bytes
>>> + * @src - source buffer, @src_size bytes
>>> + *
>>> + * Returns: compressed size on success
>>> + * -ENOMEM destination buffer is not enough to store compressed data
>>> + * -EIO on any other error
>>> + */
>>> +static ssize_t qcow2_zstd_compress(void *dest, size_t dest_size,
>>> + const void *src, size_t src_size)
>>> +{
>>> + size_t ret;
>>> + ZSTD_outBuffer output = { dest, dest_size, 0 };
>>> + ZSTD_inBuffer input = { src, src_size, 0 };
>>> + ZSTD_CCtx *cctx = ZSTD_createCCtx();
>>> +
>>> + if (!cctx) {
>>> + return -EIO;
>>> + }
>>> + /*
>>> + * ZSTD spec: "You must continue calling ZSTD_compressStream2()
>>> + * with ZSTD_e_end until it returns 0, at which point you are
>>> + * free to start a new frame"
>>> + */
>>> + {
>>> + /*
>>> + * zstd simple interface requires the exact compressed size.
>>> + * zstd stream interface reads the comressed size from
>>> + * the compressed stream frame.
>>> + * Instruct zstd to compress the whole buffer and write
>>> + * the frame which includes the compressed size.
>>> + * This allows as to use zstd streaming semantics and
>>> + * don't store the compressed size for the zstd decompression.
>>> + */
>>> + ret = ZSTD_compressStream2(cctx, &output, &input, ZSTD_e_end);
>>> + if (ZSTD_isError(ret)) {
>>> + ret = -EIO;
>>> + goto out;
>>> + }
>>> + /* Dest buffer isn't big enough to store compressed content */
>>> + if (output.pos + ret > output.size) {
>>> + ret = -ENOMEM;
>>> + goto out;
>>> + }
>>> + } while (ret);
>>> +
>>> + /* if no error, the input data must be fully consumed */
>>> + assert(input.pos == input.size);
>>> + /* make sure we can safely return compressed buffer size with ssize_t *//z
>>> + assert(output.pos <= SSIZE_MAX);
>>> + ret = output.pos;
>>> +
>>> +out:
>>> + ZSTD_freeCCtx(cctx);
>>> + return ret;
>>> +}
>>> +
>>> +/*
>>> + * qcow2_zstd_decompress()
>>> + *
>>> + * Decompress some data (not more than @src_size bytes) to produce exactly
>>> + * @dest_size bytes using zstd compression method
>>> + *
>>> + * @dest - destination buffer, @dest_size bytes
>>> + * @src - source buffer, @src_size bytes
>>> + *
>>> + * Returns: 0 on success
>>> + * -EIO on any error
>>> + */
>>> +static ssize_t qcow2_zstd_decompress(void *dest, size_t dest_size,
>>> + const void *src, size_t src_size)
>>> +{
>>> + size_t ret = 0;
>>> + ZSTD_outBuffer output = { dest, dest_size, 0 };
>>> + ZSTD_inBuffer input = { src, src_size, 0 };
>>> + ZSTD_DCtx *dctx = ZSTD_createDCtx();
>>> +
>>> + if (!dctx) {
>>> + return -EIO;
>>> + }
>>> +
>>> + {
>>> + ret = ZSTD_decompressStream(dctx, &output, &input);
>>> + if (ZSTD_isError(ret)) {
>>> + ret = -EIO;
>>> + goto out;
>>> + }
>>> + /*
>>> + * Dest buffer size is the image cluster size.
>>> + * It should be big enough to store uncompressed content.
>>> + * There shouldn't be any cases when the decompressed content
>>> + * size is greater then the cluster size.
>>> + */
>>> + if (output.pos + ret > output.size) {
>>> + ret = -EIO;
>>> + goto out;
>>> + }
>>> + } while (ret);
>>
>>
>> Hmm. Unfortunately, zstd spec is not enough verbose to understand how to use
>> these functions :).
>>
>> But I found this in comment in https://github.com/facebook/zstd/blob/dev/examples/streaming_decompression.c :
>>
>> /* The return code is zero if the frame is complete, but there may
>> * be multiple frames concatenated together.
> In our case, there should be the only frame as we stored it with ZSTD_compressStream2(..., ZSTD_e_end)
> If explicitly state in the spec, that "zstd compressed cluster must contain the only zstd compressed frame"
> On the other hand, we actually don't need such a restriction and we should be able to decompress whatever is in the buffer (cluster)
> if it's zstd stream.
>
>>
>> so, I think it would be safer to move to "while (input.pos < input.size)" loop like in example.
> yes, I think It worth doing
>>
>> and drop next assertion. And possibly do same for compression to be consistent (and safer?).
>>
>>
>>> +
>>> + /*
>>> + * If decompression went fine we must have the compressed
>>> + * cluster fully consumed and flushed
>>> + */
>>> + if (output.pos != output.size) {
>>> + ret = -EIO;
>>> + }
>>> +out:
>>> + ZSTD_freeDCtx(dctx);
>>> + return ret;
>>> +
>>> +}
>>> +#endif
>>> +
>>> static int qcow2_compress_pool_func(void *opaque)
>>> {
>>> Qcow2CompressData *data = opaque;
>>> @@ -217,6 +341,11 @@ qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
>>
>>
>> [..]
>>
>>
>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v9 1/4] qcow2: introduce compression type feature
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
2020-03-23 15:59 ` Vladimir Sementsov-Ogievskiy
@ 2020-03-30 15:06 ` Markus Armbruster
2020-03-30 15:16 ` Denis Plotnikov
1 sibling, 1 reply; 11+ messages in thread
From: Markus Armbruster @ 2020-03-30 15:06 UTC (permalink / raw)
To: Denis Plotnikov
Cc: kwolf, vsementsov, berto, qemu-block, qemu-devel, mreitz, den
Denis Plotnikov <dplotnikov@virtuozzo.com> writes:
> The patch adds some preparation parts for incompatible compression type
> feature to qcow2 allowing the use different compression methods for
> image clusters (de)compressing.
>
> It is implied that the compression type is set on the image creation and
> can be changed only later by image conversion, thus compression type
> defines the only compression algorithm used for the image, and thus,
> for all image clusters.
>
> The goal of the feature is to add support of other compression methods
> to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
>
> The default compression is ZLIB. Images created with ZLIB compression type
> are backward compatible with older qemu versions.
>
> Adding of the compression type breaks a number of tests because now the
> compression type is reported on image creation and there are some changes
> in the qcow2 header in size and offsets.
>
> The tests are fixed in the following ways:
> * filter out compression_type for many tests
> * fix header size, feature table size and backing file offset
> affected tests: 031, 036, 061, 080
> header_size +=8: 1 byte compression type
> 7 bytes padding
> feature_table += 48: incompatible feature compression type
> backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
> * add "compression type" for test output matching when it isn't filtered
> affected tests: 049, 060, 061, 065, 144, 182, 242, 255
>
> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Hmm, haven't I've seen this before? ... Yes, I provided my QAPI part:
Acked-by for v5, and the QAPI part hasn't changed since. You can save
me a bit of labor by carrying my Acked-by forward.
Once again, QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v9 1/4] qcow2: introduce compression type feature
2020-03-30 15:06 ` Markus Armbruster
@ 2020-03-30 15:16 ` Denis Plotnikov
0 siblings, 0 replies; 11+ messages in thread
From: Denis Plotnikov @ 2020-03-30 15:16 UTC (permalink / raw)
To: Markus Armbruster
Cc: kwolf, vsementsov, berto, qemu-block, qemu-devel, mreitz, den
On 30.03.2020 18:06, Markus Armbruster wrote:
> Denis Plotnikov <dplotnikov@virtuozzo.com> writes:
>
>> The patch adds some preparation parts for incompatible compression type
>> feature to qcow2 allowing the use different compression methods for
>> image clusters (de)compressing.
>>
>> It is implied that the compression type is set on the image creation and
>> can be changed only later by image conversion, thus compression type
>> defines the only compression algorithm used for the image, and thus,
>> for all image clusters.
>>
>> The goal of the feature is to add support of other compression methods
>> to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
>>
>> The default compression is ZLIB. Images created with ZLIB compression type
>> are backward compatible with older qemu versions.
>>
>> Adding of the compression type breaks a number of tests because now the
>> compression type is reported on image creation and there are some changes
>> in the qcow2 header in size and offsets.
>>
>> The tests are fixed in the following ways:
>> * filter out compression_type for many tests
>> * fix header size, feature table size and backing file offset
>> affected tests: 031, 036, 061, 080
>> header_size +=8: 1 byte compression type
>> 7 bytes padding
>> feature_table += 48: incompatible feature compression type
>> backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
>> * add "compression type" for test output matching when it isn't filtered
>> affected tests: 049, 060, 061, 065, 144, 182, 242, 255
>>
>> Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
> Hmm, haven't I've seen this before? ... Yes, I provided my QAPI part:
> Acked-by for v5, and the QAPI part hasn't changed since. You can save
> me a bit of labor by carrying my Acked-by forward.
For sure, next time. Thanks!
>
> Once again, QAPI part:
> Acked-by: Markus Armbruster <armbru@redhat.com>
>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-03-30 15:17 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-23 14:25 [PATCH v9 0/4] qcow2: Implement zstd cluster compression method Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 1/4] qcow2: introduce compression type feature Denis Plotnikov
2020-03-23 15:59 ` Vladimir Sementsov-Ogievskiy
2020-03-30 15:06 ` Markus Armbruster
2020-03-30 15:16 ` Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 2/4] qcow2: rework the cluster compression routine Denis Plotnikov
2020-03-23 14:25 ` [PATCH v9 3/4] qcow2: add zstd cluster compression Denis Plotnikov
2020-03-27 8:43 ` Vladimir Sementsov-Ogievskiy
2020-03-27 9:40 ` Denis Plotnikov
2020-03-27 11:40 ` Vladimir Sementsov-Ogievskiy
2020-03-23 14:25 ` [PATCH v9 4/4] iotests: 287: add qcow2 compression type test Denis Plotnikov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).