* [PATCH 0/2] 9pfs: iounit cleanup
@ 2021-09-27 15:44 Christian Schoenebeck
2021-09-27 15:45 ` [PATCH 1/2] 9pfs: deduplicate iounit code Christian Schoenebeck
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Christian Schoenebeck @ 2021-09-27 15:44 UTC (permalink / raw)
To: qemu-devel; +Cc: Greg Kurz, Philippe Mathieu-Daudé
Two pure refactoring code cleanup patches regarding iounit calculation, no
behaviour change.
Christian Schoenebeck (2):
9pfs: deduplicate iounit code
9pfs: simplify blksize_to_iounit()
hw/9pfs/9p.c | 41 +++++++++++++++++++----------------------
1 file changed, 19 insertions(+), 22 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH 1/2] 9pfs: deduplicate iounit code 2021-09-27 15:44 [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck @ 2021-09-27 15:45 ` Christian Schoenebeck 2021-09-27 16:27 ` Greg Kurz 2021-09-27 15:50 ` [PATCH 2/2] 9pfs: simplify blksize_to_iounit() Christian Schoenebeck 2021-09-28 11:53 ` [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck 2 siblings, 1 reply; 9+ messages in thread From: Christian Schoenebeck @ 2021-09-27 15:45 UTC (permalink / raw) To: qemu-devel; +Cc: Greg Kurz, Philippe Mathieu-Daudé Remove redundant code that translates host fileystem's block size into 9p client (guest side) block size. Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> --- hw/9pfs/9p.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c index 708b030474..c65584173a 100644 --- a/hw/9pfs/9p.c +++ b/hw/9pfs/9p.c @@ -1262,18 +1262,26 @@ static int coroutine_fn stat_to_v9stat(V9fsPDU *pdu, V9fsPath *path, #define P9_STATS_ALL 0x00003fffULL /* Mask for All fields above */ -static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) +/** + * Convert host filesystem's block size into an appropriate block size for + * 9p client (guest OS side). The value returned suggests an "optimum" block + * size for 9p I/O, i.e. to maximize performance. + * + * @pdu: 9p client request + * @blksize: host filesystem's block size + */ +static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) { int32_t iounit = 0; V9fsState *s = pdu->s; /* - * iounit should be multiples of st_blksize (host filesystem block size) + * iounit should be multiples of blksize (host filesystem block size) * as well as less than (client msize - P9_IOHDRSZ) */ - if (stbuf->st_blksize) { - iounit = stbuf->st_blksize; - iounit *= (s->msize - P9_IOHDRSZ) / stbuf->st_blksize; + if (blksize) { + iounit = blksize; + iounit *= (s->msize - P9_IOHDRSZ) / blksize; } if (!iounit) { iounit = s->msize - P9_IOHDRSZ; @@ -1281,6 +1289,11 @@ static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) return iounit; } +static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) +{ + return blksize_to_iounit(pdu, stbuf->st_blksize); +} + static int stat_to_v9stat_dotl(V9fsPDU *pdu, const struct stat *stbuf, V9fsStatDotl *v9lstat) { @@ -1899,23 +1912,8 @@ out_nofid: static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) { struct statfs stbuf; - int32_t iounit = 0; - V9fsState *s = pdu->s; - - /* - * iounit should be multiples of f_bsize (host filesystem block size - * and as well as less than (client msize - P9_IOHDRSZ)) - */ - if (!v9fs_co_statfs(pdu, path, &stbuf)) { - if (stbuf.f_bsize) { - iounit = stbuf.f_bsize; - iounit *= (s->msize - P9_IOHDRSZ) / stbuf.f_bsize; - } - } - if (!iounit) { - iounit = s->msize - P9_IOHDRSZ; - } - return iounit; + int err = v9fs_co_statfs(pdu, path, &stbuf); + return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); } static void coroutine_fn v9fs_open(void *opaque) -- 2.20.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] 9pfs: deduplicate iounit code 2021-09-27 15:45 ` [PATCH 1/2] 9pfs: deduplicate iounit code Christian Schoenebeck @ 2021-09-27 16:27 ` Greg Kurz 2021-09-27 16:50 ` Christian Schoenebeck 0 siblings, 1 reply; 9+ messages in thread From: Greg Kurz @ 2021-09-27 16:27 UTC (permalink / raw) To: Christian Schoenebeck; +Cc: Philippe Mathieu-Daudé, qemu-devel On Mon, 27 Sep 2021 17:45:00 +0200 Christian Schoenebeck <qemu_oss@crudebyte.com> wrote: > Remove redundant code that translates host fileystem's block > size into 9p client (guest side) block size. > > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> > --- > hw/9pfs/9p.c | 42 ++++++++++++++++++++---------------------- > 1 file changed, 20 insertions(+), 22 deletions(-) > > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c > index 708b030474..c65584173a 100644 > --- a/hw/9pfs/9p.c > +++ b/hw/9pfs/9p.c > @@ -1262,18 +1262,26 @@ static int coroutine_fn stat_to_v9stat(V9fsPDU *pdu, V9fsPath *path, > #define P9_STATS_ALL 0x00003fffULL /* Mask for All fields above */ > > > -static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) > +/** > + * Convert host filesystem's block size into an appropriate block size for > + * 9p client (guest OS side). The value returned suggests an "optimum" block > + * size for 9p I/O, i.e. to maximize performance. > + * > + * @pdu: 9p client request > + * @blksize: host filesystem's block size > + */ > +static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) > { > int32_t iounit = 0; > V9fsState *s = pdu->s; > > /* > - * iounit should be multiples of st_blksize (host filesystem block size) > + * iounit should be multiples of blksize (host filesystem block size) > * as well as less than (client msize - P9_IOHDRSZ) > */ > - if (stbuf->st_blksize) { > - iounit = stbuf->st_blksize; > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf->st_blksize; > + if (blksize) { > + iounit = blksize; > + iounit *= (s->msize - P9_IOHDRSZ) / blksize; > } > if (!iounit) { > iounit = s->msize - P9_IOHDRSZ; > @@ -1281,6 +1289,11 @@ static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) > return iounit; > } > > +static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat *stbuf) > +{ > + return blksize_to_iounit(pdu, stbuf->st_blksize); > +} > + > static int stat_to_v9stat_dotl(V9fsPDU *pdu, const struct stat *stbuf, > V9fsStatDotl *v9lstat) > { > @@ -1899,23 +1912,8 @@ out_nofid: > static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) > { > struct statfs stbuf; > - int32_t iounit = 0; > - V9fsState *s = pdu->s; > - > - /* > - * iounit should be multiples of f_bsize (host filesystem block size > - * and as well as less than (client msize - P9_IOHDRSZ)) > - */ > - if (!v9fs_co_statfs(pdu, path, &stbuf)) { > - if (stbuf.f_bsize) { > - iounit = stbuf.f_bsize; > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf.f_bsize; > - } > - } > - if (!iounit) { > - iounit = s->msize - P9_IOHDRSZ; > - } > - return iounit; > + int err = v9fs_co_statfs(pdu, path, &stbuf); It is usually preferred to leave a blank line between declarations and statements for easier reading. It isn't mandated in the coding style but Markus consistently asks for it :-) Maybe you can fix that before pushing to 9p.next ? Reviewed-by: Greg Kurz <groug@kaod.org> > + return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); > } > > static void coroutine_fn v9fs_open(void *opaque) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] 9pfs: deduplicate iounit code 2021-09-27 16:27 ` Greg Kurz @ 2021-09-27 16:50 ` Christian Schoenebeck 2021-09-27 17:30 ` Greg Kurz 0 siblings, 1 reply; 9+ messages in thread From: Christian Schoenebeck @ 2021-09-27 16:50 UTC (permalink / raw) To: qemu-devel; +Cc: Greg Kurz, Philippe Mathieu-Daudé On Montag, 27. September 2021 18:27:59 CEST Greg Kurz wrote: > On Mon, 27 Sep 2021 17:45:00 +0200 > > Christian Schoenebeck <qemu_oss@crudebyte.com> wrote: > > Remove redundant code that translates host fileystem's block > > size into 9p client (guest side) block size. > > > > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> > > --- > > > > hw/9pfs/9p.c | 42 ++++++++++++++++++++---------------------- > > 1 file changed, 20 insertions(+), 22 deletions(-) > > > > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c > > index 708b030474..c65584173a 100644 > > --- a/hw/9pfs/9p.c > > +++ b/hw/9pfs/9p.c > > @@ -1262,18 +1262,26 @@ static int coroutine_fn stat_to_v9stat(V9fsPDU > > *pdu, V9fsPath *path,> > > #define P9_STATS_ALL 0x00003fffULL /* Mask for All fields above > > */> > > -static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat > > *stbuf) +/** > > + * Convert host filesystem's block size into an appropriate block size > > for > > + * 9p client (guest OS side). The value returned suggests an "optimum" > > block + * size for 9p I/O, i.e. to maximize performance. > > + * > > + * @pdu: 9p client request > > + * @blksize: host filesystem's block size > > + */ > > +static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) > > > > { > > > > int32_t iounit = 0; > > V9fsState *s = pdu->s; > > > > /* > > > > - * iounit should be multiples of st_blksize (host filesystem block > > size) + * iounit should be multiples of blksize (host filesystem > > block size)> > > * as well as less than (client msize - P9_IOHDRSZ) > > */ > > > > - if (stbuf->st_blksize) { > > - iounit = stbuf->st_blksize; > > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf->st_blksize; > > + if (blksize) { > > + iounit = blksize; > > + iounit *= (s->msize - P9_IOHDRSZ) / blksize; > > > > } > > if (!iounit) { > > > > iounit = s->msize - P9_IOHDRSZ; > > > > @@ -1281,6 +1289,11 @@ static int32_t stat_to_iounit(const V9fsPDU *pdu, > > const struct stat *stbuf)> > > return iounit; > > > > } > > > > +static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat > > *stbuf) +{ > > + return blksize_to_iounit(pdu, stbuf->st_blksize); > > +} > > + > > > > static int stat_to_v9stat_dotl(V9fsPDU *pdu, const struct stat *stbuf, > > > > V9fsStatDotl *v9lstat) > > > > { > > > > @@ -1899,23 +1912,8 @@ out_nofid: > > static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) > > { > > > > struct statfs stbuf; > > > > - int32_t iounit = 0; > > - V9fsState *s = pdu->s; > > - > > - /* > > - * iounit should be multiples of f_bsize (host filesystem block size > > - * and as well as less than (client msize - P9_IOHDRSZ)) > > - */ > > - if (!v9fs_co_statfs(pdu, path, &stbuf)) { > > - if (stbuf.f_bsize) { > > - iounit = stbuf.f_bsize; > > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf.f_bsize; > > - } > > - } > > - if (!iounit) { > > - iounit = s->msize - P9_IOHDRSZ; > > - } > > - return iounit; > > + int err = v9fs_co_statfs(pdu, path, &stbuf); > > It is usually preferred to leave a blank line between declarations > and statements for easier reading. It isn't mandated in the coding > style but Markus consistently asks for it :-) Maybe you can fix > that before pushing to 9p.next ? In general: I adapt to whatever code style is preferred. I actually did run (like usual) scripts/checkpatch.pl and it did not complain. So you mean it is preferred to split up declaration and definition due to the function call involved? I.e. precisely: static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) { struct statfs stbuf; int err; err = v9fs_co_statfs(pdu, path, &stbuf); return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); } or rather :) ... static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) { struct statfs stbuf; int err = v9fs_co_statfs(pdu, path, &stbuf); return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); } We actually have mixed declaration/definition all over the place. > > Reviewed-by: Greg Kurz <groug@kaod.org> > > > + return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); > > > > } > > > > static void coroutine_fn v9fs_open(void *opaque) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] 9pfs: deduplicate iounit code 2021-09-27 16:50 ` Christian Schoenebeck @ 2021-09-27 17:30 ` Greg Kurz 0 siblings, 0 replies; 9+ messages in thread From: Greg Kurz @ 2021-09-27 17:30 UTC (permalink / raw) To: Christian Schoenebeck; +Cc: Philippe Mathieu-Daudé, qemu-devel On Mon, 27 Sep 2021 18:50:12 +0200 Christian Schoenebeck <qemu_oss@crudebyte.com> wrote: > On Montag, 27. September 2021 18:27:59 CEST Greg Kurz wrote: > > On Mon, 27 Sep 2021 17:45:00 +0200 > > > > Christian Schoenebeck <qemu_oss@crudebyte.com> wrote: > > > Remove redundant code that translates host fileystem's block > > > size into 9p client (guest side) block size. > > > > > > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> > > > --- > > > > > > hw/9pfs/9p.c | 42 ++++++++++++++++++++---------------------- > > > 1 file changed, 20 insertions(+), 22 deletions(-) > > > > > > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c > > > index 708b030474..c65584173a 100644 > > > --- a/hw/9pfs/9p.c > > > +++ b/hw/9pfs/9p.c > > > @@ -1262,18 +1262,26 @@ static int coroutine_fn stat_to_v9stat(V9fsPDU > > > *pdu, V9fsPath *path,> > > > #define P9_STATS_ALL 0x00003fffULL /* Mask for All fields above > > > */> > > > -static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat > > > *stbuf) +/** > > > + * Convert host filesystem's block size into an appropriate block size > > > for > > > + * 9p client (guest OS side). The value returned suggests an "optimum" > > > block + * size for 9p I/O, i.e. to maximize performance. > > > + * > > > + * @pdu: 9p client request > > > + * @blksize: host filesystem's block size > > > + */ > > > +static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) > > > > > > { > > > > > > int32_t iounit = 0; > > > V9fsState *s = pdu->s; > > > > > > /* > > > > > > - * iounit should be multiples of st_blksize (host filesystem block > > > size) + * iounit should be multiples of blksize (host filesystem > > > block size)> > > > * as well as less than (client msize - P9_IOHDRSZ) > > > */ > > > > > > - if (stbuf->st_blksize) { > > > - iounit = stbuf->st_blksize; > > > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf->st_blksize; > > > + if (blksize) { > > > + iounit = blksize; > > > + iounit *= (s->msize - P9_IOHDRSZ) / blksize; > > > > > > } > > > if (!iounit) { > > > > > > iounit = s->msize - P9_IOHDRSZ; > > > > > > @@ -1281,6 +1289,11 @@ static int32_t stat_to_iounit(const V9fsPDU *pdu, > > > const struct stat *stbuf)> > > > return iounit; > > > > > > } > > > > > > +static int32_t stat_to_iounit(const V9fsPDU *pdu, const struct stat > > > *stbuf) +{ > > > + return blksize_to_iounit(pdu, stbuf->st_blksize); > > > +} > > > + > > > > > > static int stat_to_v9stat_dotl(V9fsPDU *pdu, const struct stat *stbuf, > > > > > > V9fsStatDotl *v9lstat) > > > > > > { > > > > > > @@ -1899,23 +1912,8 @@ out_nofid: > > > static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) > > > { > > > > > > struct statfs stbuf; > > > > > > - int32_t iounit = 0; > > > - V9fsState *s = pdu->s; > > > - > > > - /* > > > - * iounit should be multiples of f_bsize (host filesystem block size > > > - * and as well as less than (client msize - P9_IOHDRSZ)) > > > - */ > > > - if (!v9fs_co_statfs(pdu, path, &stbuf)) { > > > - if (stbuf.f_bsize) { > > > - iounit = stbuf.f_bsize; > > > - iounit *= (s->msize - P9_IOHDRSZ) / stbuf.f_bsize; > > > - } > > > - } > > > - if (!iounit) { > > > - iounit = s->msize - P9_IOHDRSZ; > > > - } > > > - return iounit; > > > + int err = v9fs_co_statfs(pdu, path, &stbuf); > > > > It is usually preferred to leave a blank line between declarations > > and statements for easier reading. It isn't mandated in the coding > > style but Markus consistently asks for it :-) Maybe you can fix > > that before pushing to 9p.next ? > > In general: I adapt to whatever code style is preferred. > > I actually did run (like usual) scripts/checkpatch.pl and it did not complain. > Yes, this isn't enforced nor checked. > So you mean it is preferred to split up declaration and definition due to the > function call involved? I.e. precisely: > Not splitting declaration and definitions but rather the declarations from the actual code. > static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) > { > struct statfs stbuf; > int err; > > err = v9fs_co_statfs(pdu, path, &stbuf); > return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); > } > > or rather :) ... > > static int32_t coroutine_fn get_iounit(V9fsPDU *pdu, V9fsPath *path) > { > struct statfs stbuf; > int err = v9fs_co_statfs(pdu, path, &stbuf); > > return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); > } > > We actually have mixed declaration/definition all over the place. > It is okay to have mixed declarations/definitions. Second one is fine :) > > > > Reviewed-by: Greg Kurz <groug@kaod.org> > > > > > + return blksize_to_iounit(pdu, (err >= 0) ? stbuf.f_bsize : 0); > > > > > > } > > > > > > static void coroutine_fn v9fs_open(void *opaque) > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/2] 9pfs: simplify blksize_to_iounit() 2021-09-27 15:44 [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck 2021-09-27 15:45 ` [PATCH 1/2] 9pfs: deduplicate iounit code Christian Schoenebeck @ 2021-09-27 15:50 ` Christian Schoenebeck 2021-09-27 16:28 ` Greg Kurz 2021-09-27 17:53 ` Philippe Mathieu-Daudé 2021-09-28 11:53 ` [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck 2 siblings, 2 replies; 9+ messages in thread From: Christian Schoenebeck @ 2021-09-27 15:50 UTC (permalink / raw) To: qemu-devel; +Cc: Greg Kurz, Philippe Mathieu-Daudé Use QEMU_ALIGN_DOWN() macro to reduce code and to make it more human readable. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> --- hw/9pfs/9p.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c index c65584173a..29cc19c90a 100644 --- a/hw/9pfs/9p.c +++ b/hw/9pfs/9p.c @@ -1280,8 +1280,7 @@ static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) * as well as less than (client msize - P9_IOHDRSZ) */ if (blksize) { - iounit = blksize; - iounit *= (s->msize - P9_IOHDRSZ) / blksize; + iounit = QEMU_ALIGN_DOWN(s->msize - P9_IOHDRSZ, blksize); } if (!iounit) { iounit = s->msize - P9_IOHDRSZ; -- 2.20.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] 9pfs: simplify blksize_to_iounit() 2021-09-27 15:50 ` [PATCH 2/2] 9pfs: simplify blksize_to_iounit() Christian Schoenebeck @ 2021-09-27 16:28 ` Greg Kurz 2021-09-27 17:53 ` Philippe Mathieu-Daudé 1 sibling, 0 replies; 9+ messages in thread From: Greg Kurz @ 2021-09-27 16:28 UTC (permalink / raw) To: Christian Schoenebeck; +Cc: Philippe Mathieu-Daudé, qemu-devel On Mon, 27 Sep 2021 17:50:36 +0200 Christian Schoenebeck <qemu_oss@crudebyte.com> wrote: > Use QEMU_ALIGN_DOWN() macro to reduce code and to make it > more human readable. > > Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> > --- Reviewed-by: Greg Kurz <groug@kaod.org> > hw/9pfs/9p.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/hw/9pfs/9p.c b/hw/9pfs/9p.c > index c65584173a..29cc19c90a 100644 > --- a/hw/9pfs/9p.c > +++ b/hw/9pfs/9p.c > @@ -1280,8 +1280,7 @@ static int32_t blksize_to_iounit(const V9fsPDU *pdu, int32_t blksize) > * as well as less than (client msize - P9_IOHDRSZ) > */ > if (blksize) { > - iounit = blksize; > - iounit *= (s->msize - P9_IOHDRSZ) / blksize; > + iounit = QEMU_ALIGN_DOWN(s->msize - P9_IOHDRSZ, blksize); > } > if (!iounit) { > iounit = s->msize - P9_IOHDRSZ; ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] 9pfs: simplify blksize_to_iounit() 2021-09-27 15:50 ` [PATCH 2/2] 9pfs: simplify blksize_to_iounit() Christian Schoenebeck 2021-09-27 16:28 ` Greg Kurz @ 2021-09-27 17:53 ` Philippe Mathieu-Daudé 1 sibling, 0 replies; 9+ messages in thread From: Philippe Mathieu-Daudé @ 2021-09-27 17:53 UTC (permalink / raw) To: Christian Schoenebeck, qemu-devel; +Cc: Greg Kurz On 9/27/21 17:50, Christian Schoenebeck wrote: > Use QEMU_ALIGN_DOWN() macro to reduce code and to make it > more human readable. > > Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> > Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> > --- > hw/9pfs/9p.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/2] 9pfs: iounit cleanup 2021-09-27 15:44 [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck 2021-09-27 15:45 ` [PATCH 1/2] 9pfs: deduplicate iounit code Christian Schoenebeck 2021-09-27 15:50 ` [PATCH 2/2] 9pfs: simplify blksize_to_iounit() Christian Schoenebeck @ 2021-09-28 11:53 ` Christian Schoenebeck 2 siblings, 0 replies; 9+ messages in thread From: Christian Schoenebeck @ 2021-09-28 11:53 UTC (permalink / raw) To: qemu-devel; +Cc: Greg Kurz, Philippe Mathieu-Daudé On Montag, 27. September 2021 17:44:59 CEST Christian Schoenebeck wrote: > Two pure refactoring code cleanup patches regarding iounit calculation, no > behaviour change. > > Christian Schoenebeck (2): > 9pfs: deduplicate iounit code > 9pfs: simplify blksize_to_iounit() > > hw/9pfs/9p.c | 41 +++++++++++++++++++---------------------- > 1 file changed, 19 insertions(+), 22 deletions(-) Queued on 9p.next: https://github.com/cschoenebeck/qemu/commits/9p.next Thanks! Best regards, Christian Schoenebeck ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-09-28 11:54 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-09-27 15:44 [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck 2021-09-27 15:45 ` [PATCH 1/2] 9pfs: deduplicate iounit code Christian Schoenebeck 2021-09-27 16:27 ` Greg Kurz 2021-09-27 16:50 ` Christian Schoenebeck 2021-09-27 17:30 ` Greg Kurz 2021-09-27 15:50 ` [PATCH 2/2] 9pfs: simplify blksize_to_iounit() Christian Schoenebeck 2021-09-27 16:28 ` Greg Kurz 2021-09-27 17:53 ` Philippe Mathieu-Daudé 2021-09-28 11:53 ` [PATCH 0/2] 9pfs: iounit cleanup Christian Schoenebeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).