* [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive
@ 2019-06-14 17:31 Vladimir Sementsov-Ogievskiy
2019-06-25 13:32 ` Markus Armbruster
0 siblings, 1 reply; 4+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2019-06-14 17:31 UTC (permalink / raw)
To: qemu-devel; +Cc: vsementsov, berrange, armbru, kraxel, den
It's needed to provide keepalive for nbd client to track server
availability.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
v3: [by Markus's comments]
- Fix commit subject
- Add comment to qapi and restrict server-side connections
- Fix s/"keep-alive="/",keep-alive"/
qapi/sockets.json | 6 +++++-
util/qemu-sockets.c | 28 ++++++++++++++++++++++++++++
2 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/qapi/sockets.json b/qapi/sockets.json
index fc81d8d5e8..c44af481a1 100644
--- a/qapi/sockets.json
+++ b/qapi/sockets.json
@@ -53,6 +53,9 @@
#
# @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
#
+# @keep-alive: enable keep-alive when connecting to this socket. Not supported
+# for server-side connections. (Since 4.1)
+#
# Since: 1.3
##
{ 'struct': 'InetSocketAddress',
@@ -61,7 +64,8 @@
'*numeric': 'bool',
'*to': 'uint16',
'*ipv4': 'bool',
- '*ipv6': 'bool' } }
+ '*ipv6': 'bool',
+ '*keep-alive': 'bool' } }
##
# @UnixSocketAddress:
diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
index 8850a280a8..813063761b 100644
--- a/util/qemu-sockets.c
+++ b/util/qemu-sockets.c
@@ -438,6 +438,12 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
struct addrinfo *res, *e;
int sock = -1;
+ if (saddr->keep_alive) {
+ error_setg(errp, "keep-alive options is not supported for server-side "
+ "connection");
+ return -1;
+ }
+
res = inet_parse_connect_saddr(saddr, errp);
if (!res) {
return -1;
@@ -457,6 +463,19 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
}
freeaddrinfo(res);
+
+ if (saddr->keep_alive) {
+ int val = 1;
+ int ret = qemu_setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
+ &val, sizeof(val));
+
+ if (ret < 0) {
+ error_setg_errno(errp, errno, "Unable to set KEEPALIVE");
+ close(sock);
+ return -1;
+ }
+ }
+
return sock;
}
@@ -652,6 +671,15 @@ int inet_parse(InetSocketAddress *addr, const char *str, Error **errp)
}
addr->has_ipv6 = true;
}
+ begin = strstr(optstr, ",keep-alive");
+ if (begin) {
+ if (inet_parse_flag("keep-alive", begin + strlen(",keep-alive"),
+ &addr->keep_alive, errp) < 0)
+ {
+ return -1;
+ }
+ addr->has_keep_alive = true;
+ }
return 0;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive
2019-06-14 17:31 [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive Vladimir Sementsov-Ogievskiy
@ 2019-06-25 13:32 ` Markus Armbruster
2019-07-19 20:29 ` Eric Blake
0 siblings, 1 reply; 4+ messages in thread
From: Markus Armbruster @ 2019-06-25 13:32 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy; +Cc: den, kraxel, berrange, qemu-devel, armbru
I apologize for dragging my feet on this review.
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> writes:
> It's needed to provide keepalive for nbd client to track server
> availability.
>
> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
> ---
>
> v3: [by Markus's comments]
>
> - Fix commit subject
> - Add comment to qapi and restrict server-side connections
> - Fix s/"keep-alive="/",keep-alive"/
>
>
> qapi/sockets.json | 6 +++++-
> util/qemu-sockets.c | 28 ++++++++++++++++++++++++++++
> 2 files changed, 33 insertions(+), 1 deletion(-)
>
> diff --git a/qapi/sockets.json b/qapi/sockets.json
> index fc81d8d5e8..c44af481a1 100644
> --- a/qapi/sockets.json
> +++ b/qapi/sockets.json
> @@ -53,6 +53,9 @@
> #
> # @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
> #
> +# @keep-alive: enable keep-alive when connecting to this socket. Not supported
> +# for server-side connections. (Since 4.1)
> +#
Is "server-side connection" is an established term?
For what it's worth, "passive socket" is, see listen(2).
> # Since: 1.3
> ##
> { 'struct': 'InetSocketAddress',
> @@ -61,7 +64,8 @@
> '*numeric': 'bool',
> '*to': 'uint16',
> '*ipv4': 'bool',
> - '*ipv6': 'bool' } }
> + '*ipv6': 'bool',
> + '*keep-alive': 'bool' } }
>
> ##
> # @UnixSocketAddress:
> diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
> index 8850a280a8..813063761b 100644
> --- a/util/qemu-sockets.c
> +++ b/util/qemu-sockets.c
> @@ -438,6 +438,12 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
> struct addrinfo *res, *e;
> int sock = -1;
>
> + if (saddr->keep_alive) {
> + error_setg(errp, "keep-alive options is not supported for server-side "
> + "connection");
> + return -1;
> + }
> +
> res = inet_parse_connect_saddr(saddr, errp);
> if (!res) {
> return -1;
I'm afraid you added this to the wrong function; ...
> @@ -457,6 +463,19 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
> }
>
> freeaddrinfo(res);
> +
> + if (saddr->keep_alive) {
... it renders this code unreachable.
I guess the "not supported for passive sockets" check should go into
inet_listen_saddr() instead.
> + int val = 1;
> + int ret = qemu_setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE,
> + &val, sizeof(val));
> +
> + if (ret < 0) {
> + error_setg_errno(errp, errno, "Unable to set KEEPALIVE");
> + close(sock);
> + return -1;
> + }
> + }
> +
> return sock;
> }
>
> @@ -652,6 +671,15 @@ int inet_parse(InetSocketAddress *addr, const char *str, Error **errp)
> }
> addr->has_ipv6 = true;
> }
> + begin = strstr(optstr, ",keep-alive");
> + if (begin) {
> + if (inet_parse_flag("keep-alive", begin + strlen(",keep-alive"),
> + &addr->keep_alive, errp) < 0)
> + {
> + return -1;
> + }
> + addr->has_keep_alive = true;
> + }
> return 0;
> }
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive
2019-06-25 13:32 ` Markus Armbruster
@ 2019-07-19 20:29 ` Eric Blake
2019-07-24 14:09 ` Vladimir Sementsov-Ogievskiy
0 siblings, 1 reply; 4+ messages in thread
From: Eric Blake @ 2019-07-19 20:29 UTC (permalink / raw)
To: Markus Armbruster, Vladimir Sementsov-Ogievskiy
Cc: den, berrange, kraxel, qemu-devel
[-- Attachment #1.1: Type: text/plain, Size: 2302 bytes --]
On 6/25/19 8:32 AM, Markus Armbruster wrote:
> I apologize for dragging my feet on this review.
>
> Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> writes:
>
>> It's needed to provide keepalive for nbd client to track server
>> availability.
>>
>> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>> ---
>>
>> +++ b/qapi/sockets.json
>> @@ -53,6 +53,9 @@
>> #
>> # @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
>> #
>> +# @keep-alive: enable keep-alive when connecting to this socket. Not supported
>> +# for server-side connections. (Since 4.1)
It looks like this missed 4.1. Are you planning on sending v4, to address
>> +#
>
> Is "server-side connection" is an established term?
>
> For what it's worth, "passive socket" is, see listen(2).
>
>> # Since: 1.3
>> ##
>> { 'struct': 'InetSocketAddress',
>> @@ -61,7 +64,8 @@
>> '*numeric': 'bool',
>> '*to': 'uint16',
>> '*ipv4': 'bool',
>> - '*ipv6': 'bool' } }
>> + '*ipv6': 'bool',
>> + '*keep-alive': 'bool' } }
>>
>> ##
>> # @UnixSocketAddress:
>> diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
>> index 8850a280a8..813063761b 100644
>> --- a/util/qemu-sockets.c
>> +++ b/util/qemu-sockets.c
>> @@ -438,6 +438,12 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
>> struct addrinfo *res, *e;
>> int sock = -1;
>>
>> + if (saddr->keep_alive) {
>> + error_setg(errp, "keep-alive options is not supported for server-side "
>> + "connection");
>> + return -1;
>> + }
>> +
>> res = inet_parse_connect_saddr(saddr, errp);
>> if (!res) {
>> return -1;
>
> I'm afraid you added this to the wrong function; ...
>
>> @@ -457,6 +463,19 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
>> }
>>
>> freeaddrinfo(res);
>> +
>> + if (saddr->keep_alive) {
>
> ... it renders this code unreachable.
>
> I guess the "not supported for passive sockets" check should go into
> inet_listen_saddr() instead.
this comment?
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive
2019-07-19 20:29 ` Eric Blake
@ 2019-07-24 14:09 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 4+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2019-07-24 14:09 UTC (permalink / raw)
To: Eric Blake, Markus Armbruster; +Cc: qemu-devel, berrange, Denis Lunev, kraxel
19.07.2019 23:29, Eric Blake wrote:
> On 6/25/19 8:32 AM, Markus Armbruster wrote:
>> I apologize for dragging my feet on this review.
>>
>> Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> writes:
>>
>>> It's needed to provide keepalive for nbd client to track server
>>> availability.
>>>
>>> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>>> ---
>>>
>
>>> +++ b/qapi/sockets.json
>>> @@ -53,6 +53,9 @@
>>> #
>>> # @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6
>>> #
>>> +# @keep-alive: enable keep-alive when connecting to this socket. Not supported
>>> +# for server-side connections. (Since 4.1)
>
> It looks like this missed 4.1. Are you planning on sending v4, to address
>
>>> +#
>>
>> Is "server-side connection" is an established term?
>>
>> For what it's worth, "passive socket" is, see listen(2).
>>
>>> # Since: 1.3
>>> ##
>>> { 'struct': 'InetSocketAddress',
>>> @@ -61,7 +64,8 @@
>>> '*numeric': 'bool',
>>> '*to': 'uint16',
>>> '*ipv4': 'bool',
>>> - '*ipv6': 'bool' } }
>>> + '*ipv6': 'bool',
>>> + '*keep-alive': 'bool' } }
>>>
>>> ##
>>> # @UnixSocketAddress:
>>> diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
>>> index 8850a280a8..813063761b 100644
>>> --- a/util/qemu-sockets.c
>>> +++ b/util/qemu-sockets.c
>>> @@ -438,6 +438,12 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
>>> struct addrinfo *res, *e;
>>> int sock = -1;
>>>
>>> + if (saddr->keep_alive) {
>>> + error_setg(errp, "keep-alive options is not supported for server-side "
>>> + "connection");
>>> + return -1;
>>> + }
>>> +
>>> res = inet_parse_connect_saddr(saddr, errp);
>>> if (!res) {
>>> return -1;
>>
>> I'm afraid you added this to the wrong function; ...
>>
>>> @@ -457,6 +463,19 @@ int inet_connect_saddr(InetSocketAddress *saddr, Error **errp)
>>> }
>>>
>>> freeaddrinfo(res);
>>> +
>>> + if (saddr->keep_alive) {
>>
>> ... it renders this code unreachable.
>>
>> I guess the "not supported for passive sockets" check should go into
>> inet_listen_saddr() instead.
>
> this comment?
>
Sorry for big delay, will resend for 4.2 soon.
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-24 14:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-14 17:31 [Qemu-devel] [PATCH v3] qapi: Add InetSocketAddress member keep-alive Vladimir Sementsov-Ogievskiy
2019-06-25 13:32 ` Markus Armbruster
2019-07-19 20:29 ` Eric Blake
2019-07-24 14:09 ` Vladimir Sementsov-Ogievskiy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).