* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
@ 2020-01-30 13:09 ` Stevie Lavern
2020-01-31 17:02 ` Alex Bennée
` (5 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Stevie Lavern @ 2020-01-30 13:09 UTC (permalink / raw)
To: qemu-devel
Note: Qemu has been built with the following commands:
```
% ./configure --target-list=x86_64-linux-user && make
OR
% ./configure --target-list=x86_64-linux-user --enable-avx2 && make
```
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
2020-01-30 13:09 ` [Bug 1861404] " Stevie Lavern
@ 2020-01-31 17:02 ` Alex Bennée
2020-01-31 17:37 ` [Bug 1861404] [NEW] " Aleksandar Markovic
2020-01-31 21:02 ` [Bug 1861404] " Richard Henderson
` (4 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Alex Bennée @ 2020-01-31 17:02 UTC (permalink / raw)
To: qemu-devel
** Tags added: tcg testcase
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers
2020-01-31 17:02 ` Alex Bennée
@ 2020-01-31 17:37 ` Aleksandar Markovic
2020-01-31 17:37 ` Aleksandar Markovic
0 siblings, 1 reply; 10+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 17:37 UTC (permalink / raw)
To: Bug 1861404; +Cc: qemu-devel
[-- Attachment #1: Type: text/plain, Size: 2935 bytes --]
On Friday, January 31, 2020, Alex Bennée <alex.bennee@linaro.org> wrote:
> ** Tags added: tcg testcase
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1861404
>
> Title:
> AVX instruction VMOVDQU implementation error for YMM registers
>
>
If I remember well, there is no support for AVX instructions in linux-user
mode.
If that is true, how come handling of unsupported instruction went that far?
Did you try other AVX instructions?
Aleksandar
> Status in QEMU:
> New
>
> Bug description:
> Hi,
>
> Tested with Qemu 4.2.0, and with git version
> bddff6f6787c916b0e9d63ef9e4d442114257739.
>
> The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers
> (32 bytes).
> It works with XMM registers (16 bytes) though.
>
> See the attached test case `ymm.c`: when copying from memory-to-ymm0
> and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
> first 16 of the total 32 bytes.
>
> ```
> user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
>
> user@ubuntu ~/Qemu % ./ymm
> 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17
> 18 19 1A 1B 1C 1D 1E 1F
>
> user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
> 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00
> ```
>
> This seems to be because in `translate.c > gen_sse()`, the case
> handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
> performs a 16 bytes copy using two 8 bytes load and store operations
> (with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
>
> Instead, the `gen_ldo_env_A0` function should generate a copy with a
> size corresponding to the used register.
>
>
> ```
> static void gen_sse(CPUX86State *env, DisasContext *s, int b,
> target_ulong pc_start, int rex_r)
> {
> [...]
> case 0x26f: /* movdqu xmm, ea */
> if (mod != 3) {
> gen_lea_modrm(env, s, modrm);
> gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
> } else {
> [...]
> ```
>
> ```
> static inline void gen_ldo_env_A0(DisasContext *s, int offset)
> {
> int mem_index = s->mem_index;
> tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
> tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg,
> ZMM_Q(0)));
> tcg_gen_addi_tl(s->tmp0, s->A0, 8);
> tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
> tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg,
> ZMM_Q(1)));
> }
> ```
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
>
>
[-- Attachment #2: Type: text/html, Size: 3830 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers
2020-01-31 17:37 ` [Bug 1861404] [NEW] " Aleksandar Markovic
@ 2020-01-31 17:37 ` Aleksandar Markovic
0 siblings, 0 replies; 10+ messages in thread
From: Aleksandar Markovic @ 2020-01-31 17:37 UTC (permalink / raw)
To: qemu-devel
On Friday, January 31, 2020, Alex Bennée <alex.bennee@linaro.org> wrote:
> ** Tags added: tcg testcase
>
> --
> You received this bug notification because you are a member of qemu-
> devel-ml, which is subscribed to QEMU.
> https://bugs.launchpad.net/bugs/1861404
>
> Title:
> AVX instruction VMOVDQU implementation error for YMM registers
>
>
If I remember well, there is no support for AVX instructions in linux-user
mode.
If that is true, how come handling of unsupported instruction went that
far?
Did you try other AVX instructions?
Aleksandar
> Status in QEMU:
> New
>
> Bug description:
> Hi,
>
> Tested with Qemu 4.2.0, and with git version
> bddff6f6787c916b0e9d63ef9e4d442114257739.
>
> The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers
> (32 bytes).
> It works with XMM registers (16 bytes) though.
>
> See the attached test case `ymm.c`: when copying from memory-to-ymm0
> and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
> first 16 of the total 32 bytes.
>
> ```
> user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
>
> user@ubuntu ~/Qemu % ./ymm
> 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17
> 18 19 1A 1B 1C 1D 1E 1F
>
> user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
> 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00
> ```
>
> This seems to be because in `translate.c > gen_sse()`, the case
> handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
> performs a 16 bytes copy using two 8 bytes load and store operations
> (with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
>
> Instead, the `gen_ldo_env_A0` function should generate a copy with a
> size corresponding to the used register.
>
>
> ```
> static void gen_sse(CPUX86State *env, DisasContext *s, int b,
> target_ulong pc_start, int rex_r)
> {
> [...]
> case 0x26f: /* movdqu xmm, ea */
> if (mod != 3) {
> gen_lea_modrm(env, s, modrm);
> gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
> } else {
> [...]
> ```
>
> ```
> static inline void gen_ldo_env_A0(DisasContext *s, int offset)
> {
> int mem_index = s->mem_index;
> tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
> tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg,
> ZMM_Q(0)));
> tcg_gen_addi_tl(s->tmp0, s->A0, 8);
> tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
> tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg,
> ZMM_Q(1)));
> }
> ```
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
>
>
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
2020-01-30 13:09 ` [Bug 1861404] " Stevie Lavern
2020-01-31 17:02 ` Alex Bennée
@ 2020-01-31 21:02 ` Richard Henderson
2020-02-04 9:12 ` Stevie Lavern
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Richard Henderson @ 2020-01-31 21:02 UTC (permalink / raw)
To: qemu-devel
Because the sse code is sloppy, and it was interpreted
as the sse instruction movdqu.
AVX support was coded for GSoC last year,
https://lists.nongnu.org/archive/html/qemu-devel/2019-08/msg05369.html
but it has not been completely reviewed and committed.
There is no support for AVX in master.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
` (2 preceding siblings ...)
2020-01-31 21:02 ` [Bug 1861404] " Richard Henderson
@ 2020-02-04 9:12 ` Stevie Lavern
2020-02-18 12:38 ` Stevie Lavern
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Stevie Lavern @ 2020-02-04 9:12 UTC (permalink / raw)
To: qemu-devel
Thanks for your answers.
I thought the fact that there was not any warning/exception meant that
VMOVDQU was supported, but if it's mistakenly interpreted as MOVDQU then
I understand.
I read the mailing list messages on the AVX GSoC you point out, but
couldn't find any branch where this work is located. Is there a non-
released version of this that can be tested?
If I understand correctly, Qemu (or more precisely TCG) supports x86
SIMD instructions up to SSE4.1, but not AVX/AVX2/AVX-512?
Thanks.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
` (3 preceding siblings ...)
2020-02-04 9:12 ` Stevie Lavern
@ 2020-02-18 12:38 ` Stevie Lavern
2020-02-18 14:48 ` Richard Henderson
2021-05-04 19:29 ` Thomas Huth
6 siblings, 0 replies; 10+ messages in thread
From: Stevie Lavern @ 2020-02-18 12:38 UTC (permalink / raw)
To: qemu-devel
Hi,
I also noticed that the 4.2.0 release changelog mentions support for
some AVX512 instructions.
https://wiki.qemu.org/ChangeLog/4.2#x86
```
Support for AVX512 BFloat16 extensions.
```
Is this support in TCG or in another component?
If so, it would mean that TCG support some AVX512 instructions but not AVX.
Also, allow me to ask again, where can I find the work of last year's
GSoC on AVX support for TCG?
> AVX support was coded for GSoC last year,
> https://lists.nongnu.org/archive/html/qemu-devel/2019-08/msg05369.html
Thanks.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
` (4 preceding siblings ...)
2020-02-18 12:38 ` Stevie Lavern
@ 2020-02-18 14:48 ` Richard Henderson
2021-05-04 19:29 ` Thomas Huth
6 siblings, 0 replies; 10+ messages in thread
From: Richard Henderson @ 2020-02-18 14:48 UTC (permalink / raw)
To: qemu-devel
The "AVX512 BFloat16" patch is for KVM support.
As for finding the GSoC work, please follow that link,
and the ones buried inside that. There are hundreds
of patches involved.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
New
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread* [Bug 1861404] Re: AVX instruction VMOVDQU implementation error for YMM registers
2020-01-30 13:06 [Bug 1861404] [NEW] AVX instruction VMOVDQU implementation error for YMM registers Stevie Lavern
` (5 preceding siblings ...)
2020-02-18 14:48 ` Richard Henderson
@ 2021-05-04 19:29 ` Thomas Huth
6 siblings, 0 replies; 10+ messages in thread
From: Thomas Huth @ 2021-05-04 19:29 UTC (permalink / raw)
To: qemu-devel
This is an automated cleanup. This bug report has been moved to QEMU's
new bug tracker on gitlab.com and thus gets marked as 'expired' now.
Please continue with the discussion here:
https://gitlab.com/qemu-project/qemu/-/issues/132
** Changed in: qemu
Status: New => Expired
** Bug watch added: gitlab.com/qemu-project/qemu/-/issues #132
https://gitlab.com/qemu-project/qemu/-/issues/132
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1861404
Title:
AVX instruction VMOVDQU implementation error for YMM registers
Status in QEMU:
Expired
Bug description:
Hi,
Tested with Qemu 4.2.0, and with git version
bddff6f6787c916b0e9d63ef9e4d442114257739.
The x86 AVX instruction VMOVDQU doesn't work properly with YMM registers (32 bytes).
It works with XMM registers (16 bytes) though.
See the attached test case `ymm.c`: when copying from memory-to-ymm0
and then back from ymm0-to-memory using VMOVDQU, Qemu only copies the
first 16 of the total 32 bytes.
```
user@ubuntu ~/Qemu % gcc -o ymm ymm.c -Wall -Wextra -Werror
user@ubuntu ~/Qemu % ./ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
user@ubuntu ~/Qemu % ./x86_64-linux-user/qemu-x86_64 -cpu max ymm
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
```
This seems to be because in `translate.c > gen_sse()`, the case
handling the VMOVDQU instruction calls `gen_ldo_env_A0` which always
performs a 16 bytes copy using two 8 bytes load and store operations
(with `tcg_gen_qemu_ld_i64` and `tcg_gen_st_i64`).
Instead, the `gen_ldo_env_A0` function should generate a copy with a
size corresponding to the used register.
```
static void gen_sse(CPUX86State *env, DisasContext *s, int b,
target_ulong pc_start, int rex_r)
{
[...]
case 0x26f: /* movdqu xmm, ea */
if (mod != 3) {
gen_lea_modrm(env, s, modrm);
gen_ldo_env_A0(s, offsetof(CPUX86State, xmm_regs[reg]));
} else {
[...]
```
```
static inline void gen_ldo_env_A0(DisasContext *s, int offset)
{
int mem_index = s->mem_index;
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->A0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(0)));
tcg_gen_addi_tl(s->tmp0, s->A0, 8);
tcg_gen_qemu_ld_i64(s->tmp1_i64, s->tmp0, mem_index, MO_LEQ);
tcg_gen_st_i64(s->tmp1_i64, cpu_env, offset + offsetof(ZMMReg, ZMM_Q(1)));
}
```
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1861404/+subscriptions
^ permalink raw reply [flat|nested] 10+ messages in thread